[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.72 and 1.162

version 1.72, 2002/10/11 02:09:42 version 1.162, 2007/06/10 00:45:08
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20021010:  20070422:
         The config(8) grammar was changed to allow options to register          The way OS emulations lookup filenames inside the emulation root
         dependencies on attributes, as well as other options.  Users          has been changed.  Rather than modify the pathname (and copy back
         must update and reinstall usr.sbin/config before building a new          to userspace) namei() and lookup() directly check the emulation
         kernel.          root. One side effect is that absolute symlinks inside the emulated
           root filesytem will be relative to that filesystem - unless they
 20021009:          start /../ this is useful when the emulated root is a real install
         A new attribute dependency syntax was introduced to config(8),          that has such links.
         which is now used by the SCSI configuration description.  Users          This might affect symlinks that have been added to reference outside
         must update and reinstall usr.sbin/config before building a new          the emulated root.
         kernel.  
   20070412:
 20021003:          The pckbc driver on sgimips IP32 has been removed. Use macekbc
         Several changes have been made to the autoconfiguration          instead. See the GENERIC32_IP3x kernel configuration for an
         framework.  Users must update and reinstall usr.sbin/config          example.
         before building a new kernel.  
   20070319:
 20020922:          src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
         MKDYNAMICROOT=yes enabled by default, which means that          on many platforms due to incorrect flags settings.  If you
         certain shared libraries are installed into /lib, the shared          updated and built after about 20070315, do "nbmake-$arch
         linker is installed into /libexec, and all programs in /bin          cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
         and /sbin are dynamically linked.          rebuild of object files that might have been built
         If you do not use "make build", you should ensure that          incorrectly, and ensure that you have at least
         you have the libraries and shared linker in the new locations,          src/lib/libc/Makefile 1.130.
         with:  
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  20070210:
           src/sys/sys/{sa.h,savar.h} were removed.
 20020917:            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
         USE_NEW_TOOLCHAIN has been replaced with:                | xargs egrep -l '/sa.h|/savar.h' | xargs rm
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which          will allow dependencies on those files to get get rebuilt
                 there is no working in-tree toolchain (hppa, ns32k, sh5,  
                 x86_64).  20070209:
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the          The threading model was changed when the newlock2 branch
                 root ofan external toolchain (e.g. /usr/local/gnu).  This          was merged to NetBSD-current.  If you boot with a new
                 enables the cross-build framework even for TOOLCHAIN_MISSING          kernel (version 4.99.10), then you also need a new pthread
                 platforms.          library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
 20020906:          (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
         gehenna-devsw has been merged into the trunk. Need to update and          the pthread library in sync, old threaded applications should
         reinstall usr.sbin/config before build the kernel.          continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
 20020822:  
         Crunched rescue tools (contents of /bin and /sbin, plus others)  20061214:
         are now provided in /rescue.          Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
         To ensure that these are built statically linked (no matter          will need to do a "make cleandir" in
         what the setting of LDSTATIC is), use a crunchgen(1) built                  tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
         from sources newer than 20020820 (see the next entry).                  bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
 20020820:                  as the installation images in distrib/
         crunchgen(1) changed to ensure that the generated program          in order to excise stale references to the old stat_flags.h header
         is statically linked.          file in the ls sources -- stat_flags.h has been removed.
   
         Solution: update and reinstall usr.bin/crunch  20061108:
           The configure script used in the src/tools/gcc compiler has been
 20020515:          changed to indicate that our libc has ssp support built-in and
         sshd user/group has been added.  Need to hand add this in, or sshd          does not depend on -lssp and -lssp-nonshared. You'll need to
         will not let you log in (with default, or UsePrivlegeSeparation=yes)          make clean in src/tools/gcc first to rebuild the compiler.
   
         Add the following into /etc/group:  20061009:
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
         sshd:*:16:          available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
         and the following to /etc/master.passwd (via vipw):  20060814:
           The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin          withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
         also /var/chroot/sshd directory needs to be present (digged as a part of          few years should cope.
         build process).  
   20060703:
 20020426:          MPACPI is no more. We always configure PCI interrupts using ACPI
         NBUILDJOBS obsoleted in favor of just using -j.          if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
 20020426:  
         etc/postinstall added, which performs various checks for  20060627:
         configuration file updates and changes, and can fix most of          socket(2) has changed, and its system call has been versioned.
         the problems identified.          For userlands with the old version of socket(2), make sure that
         This should make it much easier to upgrade a system's          your kernel has 'options COMPAT_30' set, or else 'bad system call'
         configuration from earlier systems (as far back as NetBSD 1.5).          errors will result.
   
 20020320:  
         <bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.  
         build and install at usr.bin/xinstall before the build.  
   
 20020319:  
         raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  be sure to have sbin/rtsol and usr.sbin/rtsold  
         newer than November 2001 when you upgrade the kernel.  
   
 20020311:  
         ssh configuration files were moved from /etc to /etc/ssh.  Beware  
         if you restart your machine from remote.  Note that sshd.conf needs  
         to be changed (due to the use of "/etc" inside).  
   
 20020223:  
         Users of the VAX port will need to rebuild and install gas  
         so it deal with the now present register prefix used in all  
         the VAX assembly files.  
   
 20020118:  
   
         ntpd user/group has been added.  Need to hand add this in or builds  
         will break as mtree aborts early.  
   
         Add the following into /etc/group:  
   
         ntpd:*:15:  
   
         and the following to /etc/master.passwd (via vipw):  
   
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin  
   
 20011207:  
   
         If you're attempting to build a snapshot on sparc64 and are getting  
         reloc errors from the toolchain groff binary this means your native  
         toolchain has some broken C++ bits.  
   
         To fix:  
   
         Build a new toolchain (i.e. build.sh -t)  
         Use the new toolchain to build and install natively (i.e. /usr/lib)  
   
         gnu/lib/libgcc  
         gnu/lib/libstdc++  
   
         After this a snapshot will be able to be built.  
   
 20011201:  
         In order for a sparc64 build to work you must have a working awk. If  
         you've built and installed a system with the new toolchain up to this  
         point you do not have a working awk as its ability to do floating  
         point is broken.  
   
         To build:  
   
         remake and install gnu/lib/libgcc  
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  
         against the new libgcc.a)  
   
 20011128:  
         Kernel config information was changed to use defflag in  
         the various "files" files.  Bug fixes to config(8) are  
         required in order for this to work properly.  Make sure  
         to build and install in usr.sbin/config before attempting  
         to build a new kernel.  
   
 20011030:  
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)  
         before building libc.  
   
 20011029:  
         The new document BUILDING.mdoc (view with nroff | more, or  
         see pre-generated .txt and .html versions) describes the build  
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN  
         build process, are intended in the long run to replace this  
         manual update log.  
   
         Users building a USE_NEW_TOOLCHAIN system should read the  
         BUILDING document for caveats.  Generally, BUILDING supersedes  
         UPDATING for these systems, as tool updating is taken care of  
         by the new build system.  
   
 20011028:  
         src/etc/Makefile now needs install to be able to handle  
         symlinks that point to nowhere. A bug in install that  
         prevented this was corrected.  
   
         Solution: update and reinstall usr.bin/xinstall  
         Better Solution: Use the new toolchain and it will just work  
         for you.  
   
 20011006:  
         /etc/mtree/NetBSD.dist has been updated to take advantage of  
         absolute path support added to mtree(8). Older mtree(8)s don't  
         understand the format.  
   
         Solution: update and reinstall usr.sbin/mtree  
   
 20011004:  
         Crunchgen has been updated to work via reach-over makefiles. Updating  
         is suggested before running a snapshot build  
   
 20010915:  
         The new "ubcperf" code committed by Chuck Silvers removed  
         a header file, uvm/uvm_vnode.h.  There may be stale .depend  
         files that still reference this file.  
   
         Solution: "make cleandir && make dependall" in affected  
         directories.  
   
 20010803:  
         grep.info is now built from grep.texi using makeinfo.  Since it  
         requires makeinfo v4.0, you need to install new texinfo before  
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  
   
 20010803:  
         (i386 only): i386 kernel now uses new instructions like  
         `fxsave' which old gas doesn't understand.  To build the  
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  
         from your kernel configuration until you rebuild your userland.  
         See 20011029 above and BUILDING file in this directory for more information.  
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]  
   
 20010731:  
         Bootloader update on ELF platforms.  DDB in kernels from before  
         this will be unable to read symbol tables provided by newer  
         bootloaders.  
   
 20010726:  
         Texinfo was updated to 4.0.  To avoid failures when trying to  
         build the included texinfo files, do:  
   
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
   
 20010718:  
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
   
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
   
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
   
 20010628:  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
   
 20010226:  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
   
         To work around add by hand:  
   
         named:*:14:  
   
         to /etc/group and add:  
   
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
   
         to master.passwd (use vipw for instance if doing by hand).  
   
         Now a make build should progress.  
   
 20010219:  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
   
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
   
 20010204:  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
   
 20010114:  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
   
 20010101:  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
   
 20001230:  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
   
 20001019:  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         directory.  
   
 20000929:  
         The following make directives are obsoleted.  
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA  
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be  
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build  
         additional library libcrypto_{idea,rc5}.  
   
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 315  Hints for a more successful build:
Line 114  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 323  Hints for a more successful build:
Line 124  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 394  cd $NETBSDSRCDIR && make cleandir
Line 196  cd $NETBSDSRCDIR && make cleandir
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs  
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
   
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 440  Fix: Rebuild and install usr.bin/menuc
Line 238  Fix: Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
   
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
   
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Legend:
Removed from v.1.72  
changed lines
  Added in v.1.162

CVSweb <webmaster@jp.NetBSD.org>