[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.69 and 1.178.2.1

version 1.69, 2002/10/04 04:37:06 version 1.178.2.1, 2008/12/06 22:09:18
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20021003:  20081205:
         Several changes have been made to the autoconfiguration          If you build with MKX11=no, you should remove /etc/rc.d/xdm and
         framework.  Users must update and reinstall usr.sbin/config          /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
         before building a new kernel.          set and will appear as extra files for MKX11=no update builds.
   
 20020922:  20080827:
         MKDYNAMICROOT=yes enabled by default, which means that          If you built and installed a libc from sources between
         certain shared libraries are installed into /lib, the shared          2008/08/20 and 2008/08/26 you got a broken strtouq(3)
         linker is installed into /libexec, and all programs in /bin          which results in false errors reported by lint(1).
         and /sbin are dynamically linked.          Since this breaks the libc build itself, manual help is
         If you do not use "make build", you should ensure that          needed -- lint must be disabled temporarily, e.g:
         you have the libraries and shared linker in the new locations,            $ (cd lib/libc && make MKLINT=no dependall install)
         with:  
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  20080813:
           MKDEBUG build was broken because the .depend files did not know
 20020917:          about .go files. You need to remove all .depend files and rebuild.
         USE_NEW_TOOLCHAIN has been replaced with:  
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which  20080731:
                 there is no working in-tree toolchain (hppa, ns32k, sh5,          WAPBL (metadata journaling support) has been added, but at this
                 x86_64).          time isn't backwards compatible with pre-WAPBL aware kernels
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the          and userland (fsck_ffs in particular).  Please make sure you
                 root ofan external toolchain (e.g. /usr/local/gnu).  This          don't use a journaled filesystem with an older kernel/userland,
                 enables the cross-build framework even for TOOLCHAIN_MISSING          especially an uncleanly mounted journaled filesystem.  WAPBL
                 platforms.          also requires the super block to be in the UFS2 format.  You
           can use fsck_ffs -c 4 to update the superblock format.
 20020906:  
         gehenna-devsw has been merged into the trunk. Need to update and  20080721:
         reinstall usr.sbin/config before build the kernel.          Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
           isn't defined.
 20020822:  
         Crunched rescue tools (contents of /bin and /sbin, plus others)  20080531:
         are now provided in /rescue.          The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
           from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
         To ensure that these are built statically linked (no matter          utility needs to be rebuilt and reinstalled as older binaries
         what the setting of LDSTATIC is), use a crunchgen(1) built          won't work correctly. The following sequence of commands:
         from sources newer than 20020820 (see the next entry).  
             $ (cd sys/sys/ && nbmake-$arch includes)
 20020820:            $ (cd sbin/drvctl/ && nbmake-$arch clean)
         crunchgen(1) changed to ensure that the generated program            $ (cd sbin/drvctl/ && nbmake-$arch all)
         is statically linked.  
           leaves new drvctl utility in sbin/drvctl build directory.
         Solution: update and reinstall usr.bin/crunch  
   20080503:
 20020515:          The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
         sshd user/group has been added.  Need to hand add this in, or sshd  
         will not let you log in (with default, or UsePrivlegeSeparation=yes)  20080521:
           For a while, unprivileged UPDATE builds would fail to
         Add the following into /etc/group:          succeed at the checkflist stage, complaining that
           ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
         sshd:*:16:          problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
           If you already hit this problem, update the .mk file,
         and the following to /etc/master.passwd (via vipw):          remove ${DESTDIR}/stand/<arch>, and re-run the build.
   
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin  20080303:
           Linker warnings are now fatal if $WARNS>0.
         also /var/chroot/sshd directory needs to be present (digged as a part of  
         build process).  20080126:
           The posix_fadvise system call has been changed from an assembly
 20020426:          stub, to a c file that calls an assembly stub. You need to
         NBUILDJOBS obsoleted in favor of just using -j.          'rm -f posix_fadvise.* .depend' in the libc build directory to
           avoid using the old assembly stub.
 20020426:  
         etc/postinstall added, which performs various checks for  20071209:
         configuration file updates and changes, and can fix most of          The acpiec(4) driver has been split into two attachments. If you
         the problems identified.          get ACPI errors before the attachment, please update your kernel
         This should make it much easier to upgrade a system's          configuration file appropriately or see GENERIC for more details.
         configuration from earlier systems (as far back as NetBSD 1.5).  
   20071115:
 20020320:          The it(4) driver has been renamed to itesio(4) and the old port
         <bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.          argument specified in the kernel configuration file is not valid
         build and install at usr.bin/xinstall before the build.          anymore. The itesio(4) driver now uses the Super I/O address port
           rather than the EC address port. Please update your kernel
 20020319:          configuration file appropriately or see GENERIC for more details.
         raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  be sure to have sbin/rtsol and usr.sbin/rtsold  20071028:
         newer than November 2001 when you upgrade the kernel.          The pccons(4) driver has been removed from the NetBSD/shark port.
           You need to update any custom kernel configuration file you have
 20020311:          to remove any references to pccons (which includes removing the
         ssh configuration files were moved from /etc to /etc/ssh.  Beware          now useless XSERVER option) and replace them with the correct
         if you restart your machine from remote.  Note that sshd.conf needs          entries for the wscons driver.  See the GENERIC configuration file
         to be changed (due to the use of "/etc" inside).          for more details.
   
 20020223:  20070913:
         Users of the VAX port will need to rebuild and install gas          A latent bug in dhclient/dhcpd that caused it to be unable to
         so it deal with the now present register prefix used in all          enumerate interfaces was fixed.  The bug began to cause
         the VAX assembly files.          problems after 20070911 when the kernel's SIOCGIFCONF
           implementation was repaired.  From 20070529 to 20070911 racoon
 20020118:          could not enumerate interfaces.  (These are noted because
           normal kernel/userspace version matching hygiene is not
         ntpd user/group has been added.  Need to hand add this in or builds          sufficient to avoid this problem.)  Ensure that both kernel
         will break as mtree aborts early.          and userland are from after 20070913.
   
         Add the following into /etc/group:  20070703:
           nbinstall has been renamed as it calls the target specific and
         ntpd:*:15:          the logic to pass down STRIP from mk been removed.  This forces
           a re-installation of tools.
         and the following to /etc/master.passwd (via vipw):  
   20070422:
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin          The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
 20011207:          to userspace) namei() and lookup() directly check the emulation
           root. One side effect is that absolute symlinks inside the emulated
         If you're attempting to build a snapshot on sparc64 and are getting          root file system will be relative to that file system - unless they
         reloc errors from the toolchain groff binary this means your native          start /../ this is useful when the emulated root is a real install
         toolchain has some broken C++ bits.          that has such links.
           This might affect symlinks that have been added to reference outside
         To fix:          the emulated root.
   
         Build a new toolchain (i.e. build.sh -t)  20070412:
         Use the new toolchain to build and install natively (i.e. /usr/lib)          The pckbc driver on sgimips IP32 has been removed. Use macekbc
           instead. See the GENERIC32_IP3x kernel configuration for an
         gnu/lib/libgcc          example.
         gnu/lib/libstdc++  
   20070319:
         After this a snapshot will be able to be built.          src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
 20011201:          updated and built after about 20070315, do "nbmake-$arch
         In order for a sparc64 build to work you must have a working awk. If          cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
         you've built and installed a system with the new toolchain up to this          rebuild of object files that might have been built
         point you do not have a working awk as its ability to do floating          incorrectly, and ensure that you have at least
         point is broken.          src/lib/libc/Makefile 1.130.
   
         To build:  20070210:
           src/sys/sys/{sa.h,savar.h} were removed.
         remake and install gnu/lib/libgcc            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links                | xargs egrep -l '/sa.h|/savar.h' | xargs rm
         against the new libgcc.a)          will allow dependencies on those files to get get rebuilt
   
 20011128:  20070209:
         Kernel config information was changed to use defflag in          The threading model was changed when the newlock2 branch
         the various "files" files.  Bug fixes to config(8) are          was merged to NetBSD-current.  If you boot with a new
         required in order for this to work properly.  Make sure          kernel (version 4.99.10), then you also need a new pthread
         to build and install in usr.sbin/config before attempting          library (/usr/lib/libpthread.so.0.7).  If you boot with
         to build a new kernel.          an old kernel, then you need the old pthread library
           (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
 20011030:          the pthread library in sync, old threaded applications should
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)          continue to work with an old or new kernel.  Note that named(8)
         before building libc.          is the only threaded application in the base system.
   
 20011029:  20061214:
         The new document BUILDING.mdoc (view with nroff | more, or          Following the move of string_to_flags() and flags_to_string()
         see pre-generated .txt and .html versions) describes the build          from the bin/ls/ sources to libutil, users doing UPDATE builds
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN          will need to do a "make cleandir" in
         build process, are intended in the long run to replace this                  tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
         manual update log.                  bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
         Users building a USE_NEW_TOOLCHAIN system should read the                  as the installation images in distrib/
         BUILDING document for caveats.  Generally, BUILDING supersedes          in order to excise stale references to the old stat_flags.h header
         UPDATING for these systems, as tool updating is taken care of          file in the ls sources -- stat_flags.h has been removed.
         by the new build system.  
   20061108:
 20011028:          The configure script used in the src/tools/gcc compiler has been
         src/etc/Makefile now needs install to be able to handle          changed to indicate that our libc has ssp support built-in and
         symlinks that point to nowhere. A bug in install that          does not depend on -lssp and -lssp-nonshared. You'll need to
         prevented this was corrected.          make clean in src/tools/gcc first to rebuild the compiler.
   
         Solution: update and reinstall usr.bin/xinstall  20061009:
         Better Solution: Use the new toolchain and it will just work          The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
         for you.          available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
 20011006:  20060814:
         /etc/mtree/NetBSD.dist has been updated to take advantage of          The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
         absolute path support added to mtree(8). Older mtree(8)s don't          withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
         understand the format.          kernel configuration for an example.  X servers from the last
           few years should cope.
         Solution: update and reinstall usr.sbin/mtree  
   20060703:
 20011004:          MPACPI is no more. We always configure PCI interrupts using ACPI
         Crunchgen has been updated to work via reach-over makefiles. Updating          if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
         is suggested before running a snapshot build          to ACPI_SCANPCI. Thanks to work from fvdl.
   
 20010915:  20060627:
         The new "ubcperf" code committed by Chuck Silvers removed          socket(2) has changed, and its system call has been versioned.
         a header file, uvm/uvm_vnode.h.  There may be stale .depend          For userlands with the old version of socket(2), make sure that
         files that still reference this file.          your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
         Solution: "make cleandir && make dependall" in affected  
         directories.  
   
 20010803:  
         grep.info is now built from grep.texi using makeinfo.  Since it  
         requires makeinfo v4.0, you need to install new texinfo before  
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  
   
 20010803:  
         (i386 only): i386 kernel now uses new instructions like  
         `fxsave' which old gas doesn't understand.  To build the  
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  
         from your kernel configuration until you rebuild your userland.  
         See 20011029 above and BUILDING file in this directory for more information.  
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]  
   
 20010731:  
         Bootloader update on ELF platforms.  DDB in kernels from before  
         this will be unable to read symbol tables provided by newer  
         bootloaders.  
   
 20010726:  
         Texinfo was updated to 4.0.  To avoid failures when trying to  
         build the included texinfo files, do:  
   
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
   
 20010718:  
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
   
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
   
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
   
 20010628:  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
   
 20010226:  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
   
         To work around add by hand:  
   
         named:*:14:  
   
         to /etc/group and add:  
   
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
   
         to master.passwd (use vipw for instance if doing by hand).  
   
         Now a make build should progress.  
   
 20010219:  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
   
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
   
 20010204:  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
   
 20010114:  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
   
 20010101:  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
   
 20001230:  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
   
 20001019:  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         directory.  
   
 20000929:  
         The following make directives are obsoleted.  
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA  
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be  
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build  
         additional library libcrypto_{idea,rc5}.  
   
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 303  Hints for a more successful build:
Line 211  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 311  Hints for a more successful build:
Line 221  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 382  cd $NETBSDSRCDIR && make cleandir
Line 293  cd $NETBSDSRCDIR && make cleandir
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs  
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
   
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 428  Fix: Rebuild and install usr.bin/menuc
Line 335  Fix: Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
   
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
   
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Legend:
Removed from v.1.69  
changed lines
  Added in v.1.178.2.1

CVSweb <webmaster@jp.NetBSD.org>