[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.43 and 1.56

version 1.43, 2001/10/29 01:53:56 version 1.56, 2002/03/19 14:42:41
Line 5  process and a reference on what to do if
Line 5  process and a reference on what to do if
   
 For a more detailed description see Makefile.  For a more detailed description see Makefile.
   
 Note that users of the new toolchain in many instances will not  
 experience the problems listed below because their host tools are  
 automatically generated for them.  
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20011028:  20020320:
         /usr/src/build.sh exists as of 2001.10.19. From the cvs log:          <bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.
   
   20020319:
           raw IPv6 socket now makes strict checking for sa_family and sa_len
           on send(2) operation.  be sure to have sbin/rtsol and usr.sbin/rtsold
           newer than November 2001 when you upgrade the kernel.
   
   20020311:
           ssh configuration files were moved from /etc to /etc/ssh.  Beware
           if you restart your machine from remote.  Note that sshd.conf needs
           to be changed (due to the use of "/etc" inside).
   
   20020223:
           Users of the VAX port will need to rebuild and install gas
           so it deal with the now present register prefix used in all
           the VAX assembly files.
   
   20020118:
   
           ntpd user/group has been added.  Need to hand add this in or builds
           will break as mtree aborts early.
   
           Add the following into /etc/group:
   
           ntpd:*:15:
   
           and the following to /etc/master.passwd (via vipw):
   
           ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin
   
   20011207:
   
           If you're attempting to build a snapshot on sparc64 and are getting
           reloc errors from the toolchain groff binary this means your native
           toolchain has some broken C++ bits.
   
           To fix:
   
           Build a new toolchain (i.e. build.sh -t)
           Use the new toolchain to build and install natively (i.e. /usr/lib)
   
         "Script to automate bootstrapping a build on any host platform.          gnu/lib/libgcc
          Creates a bmake (rebuilds, if necessary) and invokes that to          gnu/lib/libstdc++
          start the build."  
   
         This should, incidentally, allow 1.5.x hosts to build -current          After this a snapshot will be able to be built.
         using the new toolchain, on USE_NEW_TOOLCHAIN-enabled platforms.  
   20011201:
           In order for a sparc64 build to work you must have a working awk. If
           you've built and installed a system with the new toolchain up to this
           point you do not have a working awk as its ability to do floating
           point is broken.
   
           To build:
   
           remake and install gnu/lib/libgcc
           remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links
           against the new libgcc.a)
   
   20011128:
           Kernel config information was changed to use defflag in
           the various "files" files.  Bug fixes to config(8) are
           required in order for this to work properly.  Make sure
           to build and install in usr.sbin/config before attempting
           to build a new kernel.
   
   20011030:
           libc/locale/wcstod.c now needs new lint(1). Update lint(1)
           before building libc.
   
   20011029:
           The new document BUILDING.mdoc (view with nroff | more, or
           see pre-generated .txt and .html versions) describes the build
           procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN
           build process, are intended in the long run to replace this
           manual update log.
   
           Users building a USE_NEW_TOOLCHAIN system should read the
           BUILDING document for caveats.  Generally, BUILDING supersedes
           UPDATING for these systems, as tool updating is taken care of
           by the new build system.
   
 20011028:  20011028:
         src/etc/Makefile now needs install to be able to handle          src/etc/Makefile now needs install to be able to handle
Line 39  Recent changes:
Line 107  Recent changes:
         Solution: update and reinstall usr.sbin/mtree          Solution: update and reinstall usr.sbin/mtree
   
 20011004:  20011004:
   
         Crunchgen has been updated to work via reach-over makefiles. Updating          Crunchgen has been updated to work via reach-over makefiles. Updating
         is suggested before running a snapshot build          is suggested before running a snapshot build
   
 20010922:  
         The new toolchain is enabled on i386.  This new build method  
         is intended to make all the upgrade issues elsewhere in UPDATING  
         obsolete (stay tuned...).  
   
         i386 platform builds must now set TOOLDIR in mk.conf or the  
         environment in order to build the system.  This is a pathname  
         where host build tools will be installed, and must NOT be  
         the same as src/tools.  
   
         (Optionally, USETOOLS=no can be set in the environment if you  
         wish to avoid using the separate host toolchain for building a  
         subtree.  Otherwise, this will default to "yes" automatically.)  
   
 20010915:  20010915:
         The new "ubcperf" code committed by Chuck Silvers removed          The new "ubcperf" code committed by Chuck Silvers removed
         a header file, uvm/uvm_vnode.h.  There may be stale .depend          a header file, uvm/uvm_vnode.h.  There may be stale .depend
Line 74  Recent changes:
Line 127  Recent changes:
 20010803:  20010803:
         (i386 only): i386 kernel now uses new instructions like          (i386 only): i386 kernel now uses new instructions like
         `fxsave' which old gas doesn't understand.  To build the          `fxsave' which old gas doesn't understand.  To build the
         kernel successfuly, you need to build and install new gas          kernel successfully, you need to build and install new gas
         (gnu/usr.bin/gas.new), or (temporarily) comment out          (gnu/usr.bin/gas.new), or (temporarily) comment out
         "options I686_CPU" from your kernel configuration until you          "options I686_CPU" from your kernel configuration until you
         rebuilt your userland (and got a new gas).          rebuilt your userland (and got a new gas).
Line 92  Recent changes:
Line 145  Recent changes:
         make MKINFO=no dependall install          make MKINFO=no dependall install
   
 20010718:  20010718:
   
         Enabled correct .init/.fini processing in crt0.  The way this          Enabled correct .init/.fini processing in crt0.  The way this
         was done was to change a -I directive to cc(1), which means          was done was to change a -I directive to cc(1), which means
         make(1) will have a stale dependency (it will be checking the          make(1) will have a stale dependency (it will be checking the
Line 105  Recent changes:
Line 157  Recent changes:
         before starting your build.          before starting your build.
   
 20010628:  20010628:
   
         A construct was added to uvm_page.h that uncovered a bug          A construct was added to uvm_page.h that uncovered a bug
         in lint(1).  If you get a warning/error about a non-portable          in lint(1).  If you get a warning/error about a non-portable
         bitfield, update your lint(1) before proceeding.          bitfield, update your lint(1) before proceeding.
   
 20010226:  20010226:
   
         Added named user/group to system. Need to hand add this in or builds          Added named user/group to system. Need to hand add this in or builds
         will break as mtree aborts early.          will break as mtree aborts early.
   
Line 128  Recent changes:
Line 178  Recent changes:
         Now a make build should progress.          Now a make build should progress.
   
 20010219:  20010219:
         get/setprogname() added. Any hostprog's that may use this will need          get/setprogname() added. Any hostprogs that may use this will need
         to be bootstrapped manually until the host system is current.          to be bootstrapped manually until the host system is current.
   
         Known problems: sys/arch/macppc/stand/fixcoff          Known problems: sys/arch/macppc/stand/fixcoff
Line 170  Recent changes:
Line 220  Recent changes:
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build          built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build
         additional library libcrypto_{idea,rc5}.          additional library libcrypto_{idea,rc5}.
   
 20000623:  
         MKCRYPTO and friends added to share/mk/bsd.own.mk.  
         'cd share/mk ; make install' needed before make build.  
   
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Legend:
Removed from v.1.43  
changed lines
  Added in v.1.56

CVSweb <webmaster@jp.NetBSD.org>