[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.29 and 1.163.4.1

version 1.29, 2001/07/31 22:53:21 version 1.163.4.1, 2007/11/06 23:07:11
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20010731:  20071028:
         Bootloader update on ELF platforms.  DDB in kernels from before          The pccons(4) driver has been removed from the NetBSD/shark port.
         this will be unable to read symbol tables provided by newer          You need to update any custom kernel configuration file you have
         bootloaders.          to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
 20010726:          entries for the wscons driver.  See the GENERIC configuration file
         Texinfo was updated to 4.0.  To avoid failures when trying to          for more details.
         build the included texinfo files, do:  
   20070913:
         cd src/gnu/usr.bin/texinfo          A latent bug in dhclient/dhcpd that caused it to be unable to
         make MKINFO=no dependall install          enumerate interfaces was fixed.  The bug began to cause
           problems after 20070911 when the kernel's SIOCGIFCONF
 20010718:          implementation was repaired.  From 20070529 to 20070911 racoon
           could not enumerate interfaces.  (These are noted because
         Enabled correct .init/.fini processing in crt0.  The way this          normal kernel/userspace version matching hygiene is not
         was done was to change a -I directive to cc(1), which means          sufficient to avoid this problem.)  Ensure that both kernel
         make(1) will have a stale dependency (it will be checking the          and userland are from after 20070913.
         timestamp on the wrong "dot_init.h").  
   20070703:
         The symptom you will see is that new programs die with SIGSEGV          nbinstall has been renamed as it calls the target specific and
         if you have a stale dependency.          the logic to pass down STRIP from mk been removed.  This forces
           a re-installation of tools.
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  20070422:
           The way OS emulations lookup filenames inside the emulation root
 20010628:          has been changed.  Rather than modify the pathname (and copy back
           to userspace) namei() and lookup() directly check the emulation
         A construct was added to uvm_page.h that uncovered a bug          root. One side effect is that absolute symlinks inside the emulated
         in lint(1).  If you get a warning/error about a non-portable          root filesytem will be relative to that filesystem - unless they
         bitfield, update your lint(1) before proceeding.          start /../ this is useful when the emulated root is a real install
           that has such links.
 20010226:          This might affect symlinks that have been added to reference outside
           the emulated root.
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  20070412:
           The pckbc driver on sgimips IP32 has been removed. Use macekbc
         To work around add by hand:          instead. See the GENERIC32_IP3x kernel configuration for an
           example.
         named:*:14:  
   20070319:
         to /etc/group and add:          src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin          updated and built after about 20070315, do "nbmake-$arch
           cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
         to master.passwd (use vipw for instance if doing by hand).          rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
         Now a make build should progress.          src/lib/libc/Makefile 1.130.
   
 20010219:  20070210:
         get/setprogname() added. Any hostprog's that may use this will need          src/sys/sys/{sa.h,savar.h} were removed.
         to be bootstrapped manually until the host system is current.            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                 | xargs egrep -l '/sa.h|/savar.h' | xargs rm
         Known problems: sys/arch/macppc/stand/fixcoff          will allow dependencies on those files to get get rebuilt
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  20070209:
                         usr.sbin/mdsetimage - Build a static copy if          The threading model was changed when the newlock2 branch
                           building a snapshot before fully bootstrapped.          was merged to NetBSD-current.  If you boot with a new
           kernel (version 4.99.10), then you also need a new pthread
 20010204:          library (/usr/lib/libpthread.so.0.7).  If you boot with
         prepare the code to compile with stricter gcc flags. in          an old kernel, then you need the old pthread library
         particular start eliminating redundant declarations. Yacc          (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
         needs to be installed before make build.          the pthread library in sync, old threaded applications should
           continue to work with an old or new kernel.  Note that named(8)
 20010114:          is the only threaded application in the base system.
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  20061214:
         anything make and install in usr.bin/make, then proceed          Following the move of string_to_flags() and flags_to_string()
         with make build.          from the bin/ls/ sources to libutil, users doing UPDATE builds
           will need to do a "make cleandir" in
 20010101:                  tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
         bsd.subdir.mk committed 20001230 had a bug which caused                  bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
         afterinstall targets to run too soon; update again.                  usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
 20001230:          in order to excise stale references to the old stat_flags.h header
         New share/mk files needed to support .WAIT in SUBDIR variables.          file in the ls sources -- stat_flags.h has been removed.
         If you get make errors,  
                 (cd share/mk; make install)  20061108:
         Also, PRINTOBJDIR has changed and is now used more heavily.          The configure script used in the src/tools/gcc compiler has been
           changed to indicate that our libc has ssp support built-in and
 20001019:          does not depend on -lssp and -lssp-nonshared. You'll need to
         The `ca' device driver has been replaced by `ld'; although the          make clean in src/tools/gcc first to rebuild the compiler.
         major and minor numbers haven't changed, you should update your /dev  
         directory.  20061009:
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
 20000929:          available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
         The following make directives are obsoleted.  
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA  20060814:
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be          The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build          withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
         additional library libcrypto_{idea,rc5}.          kernel configuration for an example.  X servers from the last
           few years should cope.
 20000623:  
         MKCRYPTO and friends added to share/mk/bsd.own.mk.  20060703:
         'cd share/mk ; make install' needed before make build.          MPACPI is no more. We always configure PCI interrupts using ACPI
           if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
   
   20060627:
           socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 116  Hints for a more successful build:
Line 137  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 124  Hints for a more successful build:
Line 147  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 173  for anyone who uses any make(1) features
Line 197  for anyone who uses any make(1) features
 #!/bin/sh  #!/bin/sh
 . /etc/mk.conf  . /etc/mk.conf
   
 if [ -z $BSDSRCDIR ] ; then  if [ -z $NETBSDSRCDIR ] ; then
     BSDSRCDIR=/usr/src      NETBSDSRCDIR=/usr/src
 fi  fi
 if [ \! -d $BSDSRCDIR ] ; then  if [ \! -d $NETBSDSRCDIR ] ; then
     echo Unable to find sources      echo Unable to find sources
     exit 1      exit 1
 fi  fi
 find $BSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;  find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
   
 if [ -z $BSDOBJDIR ] ; then  if [ -z $BSDOBJDIR ] ; then
     BSDOBJDIR=/usr/obj      BSDOBJDIR=/usr/obj
Line 189  if [ -d $BSDOBJDIR ] ; then
Line 213  if [ -d $BSDOBJDIR ] ; then
     rm -rf $BSDOBJDIR      rm -rf $BSDOBJDIR
 fi  fi
   
 cd $BSDSRCDIR && make cleandir  cd $NETBSDSRCDIR && make cleandir
   
 ---cut here---  ---cut here---
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs  
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
   
 Other problems and possibly solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 241  Fix: Rebuild and install usr.bin/menuc
Line 261  Fix: Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
   
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
   
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Legend:
Removed from v.1.29  
changed lines
  Added in v.1.163.4.1

CVSweb <webmaster@jp.NetBSD.org>