[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.56 and 1.208

version 1.56, 2002/03/19 14:42:41 version 1.208, 2010/02/04 22:25:21
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20020320:  20100204:
         <bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.          The termcap database has been removed from the sources,
           but has not been marked obsolete so it is not removed
 20020319:          from the system when upgrading.
         raw IPv6 socket now makes strict checking for sa_family and sa_len          As such, you will need to remove them from your object
         on send(2) operation.  be sure to have sbin/rtsol and usr.sbin/rtsold          and destination directories.
         newer than November 2001 when you upgrade the kernel.  
   20091101:
 20020311:          After updating, it may be necessary to make the 'cleandir'
         ssh configuration files were moved from /etc to /etc/ssh.  Beware          target in src/tools/yacc/ and in src/usr.bin/yacc/ before a
         if you restart your machine from remote.  Note that sshd.conf needs          'build.sh -u tools' or 'build.sh -u distribution'.  Ditto
         to be changed (due to the use of "/etc" inside).          src/tools/lex/ and src/usr.bin/lex/.
   
 20020223:  20091001:
         Users of the VAX port will need to rebuild and install gas          On amd64 you must rebuild tools (to get the new binutils)
         so it deal with the now present register prefix used in all          before building a kernel, or the build fails on cpufunc.S.
         the VAX assembly files.  
   20091001:
 20020118:          An error will create a ./usr/X11R7/lib/X11/xkb/compiled/xkb
           symlink, failing the build.  Delete the link, and the subdir
         ntpd user/group has been added.  Need to hand add this in or builds          it is in, and retry your build.
         will break as mtree aborts early.  
   20090718:
         Add the following into /etc/group:          libc build changed so that strchr() provides the extra entry
           point for index(). Update build of libc.a (and libc_pic.a)
         ntpd:*:15:          may fail because the archive contains the unwanted index.o.
           (Similarly for strrchr() and rindex().)
         and the following to /etc/master.passwd (via vipw):  
   20090709:
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin          Native Xorg was upgraded again.  Builds will probably fail again
           without a clean objdir, at least for src/external/mit/xorg.
 20011207:  
   20090616:
         If you're attempting to build a snapshot on sparc64 and are getting          Native Xorg was upgraded.  Builds will need a clean objdir for
         reloc errors from the toolchain groff binary this means your native          src/external/mit/xorg.  Upgrading a system from sets will not
         toolchain has some broken C++ bits.          work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
           subdirectory has been changed into a file, and this needs to
         To fix:          be manually "rm -r"'ed before installing xbase.tgz.
   
         Build a new toolchain (i.e. build.sh -t)  20090501:
         Use the new toolchain to build and install natively (i.e. /usr/lib)          Several new functions were added to string.h/libc, and this
           can cause autoconf problems during the tool build for people
         gnu/lib/libgcc          who fail to clean out their tools objects properly. If you
         gnu/lib/libstdc++          note messages about stpcpy, stpncpy or strnlen accompanying a
           failure during the tool build, clean out all your tools
         After this a snapshot will be able to be built.          objects and start again.
   
 20011201:  20090325:
         In order for a sparc64 build to work you must have a working awk. If          The i386 port was switched to i486 default toolchain.  This requires
         you've built and installed a system with the new toolchain up to this          cleaning your src/tools directory and $TOOLDIR and rebuilding them.
         point you do not have a working awk as its ability to do floating  
         point is broken.  20090126:
           The __posix_fadvise50 system call changed assembly stub type. You
         To build:          need to 'rm -f __posix_fadvise50.*' in the libc build directory
           to avoid using the old assembly stub.
         remake and install gnu/lib/libgcc  
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  20090202:
         against the new libgcc.a)          pkg_install now depends on the pkgdb cache for automatic conflict
           detection.  It is recommented to rebuild the cache with
 20011128:          ``pkg_admin rebuild''.
         Kernel config information was changed to use defflag in  
         the various "files" files.  Bug fixes to config(8) are  20090110:
         required in order for this to work properly.  Make sure          time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
         to build and install in usr.sbin/config before attempting          1. Make sure your kernel has COMPAT_50 in it. Build and install.
         to build a new kernel.             This is needed even in the MODULAR kernel because there is
              conditionally compiled code in rtsock.c.
 20011030:          2. make sure build.sh completes and the binaries in a chroot work
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)             before installing.
         before building libc.          3. If you don't use build.sh and you build directly to root, and
              your build breaks in the middle, don't despair. Make sure headers
 20011029:             are installed properly, and start building libraries first libc
         The new document BUILDING.mdoc (view with nroff | more, or             and libutil, install them and then continue building all the
         see pre-generated .txt and .html versions) describes the build             libraries in src/lib and src/gnu/lib and install them. Once
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN             the new libraries are installed, you can restart the build.
         build process, are intended in the long run to replace this          4. If you compile packages and you notice link time warnings,
         manual update log.             rebuild the required packages to update their shared libraries.
              Any package you rebuild will require rebuilding all the packages
         Users building a USE_NEW_TOOLCHAIN system should read the             that depend on it.
         BUILDING document for caveats.  Generally, BUILDING supersedes          5. Next time you run pwd_mkdb with the new binary, the file
         UPDATING for these systems, as tool updating is taken care of             will be upgraded and it will not be backwards compatible.
         by the new build system.          6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
              lastlogx(5)) have been versioned, and there is a heuristic
 20011028:             for utmp. You are better off removing the old files after
         src/etc/Makefile now needs install to be able to handle             upgrading.  The automated clearing of /var/run during
         symlinks that point to nowhere. A bug in install that             boot, and the automated rotating of files in /var/log by
         prevented this was corrected.             newsyslog(8), may mean that you do not have to remove the
              files manually.
         Solution: update and reinstall usr.bin/xinstall          7. The optional accounting file (/var/account/acct, see
         Better Solution: Use the new toolchain and it will just work             accton(8)) has not been versioned, and will need to be
         for you.             removed.  The automatic rotation of the accounting file by
              /etc/daily limits the bad consequences of failure to remove
 20011006:             the file.
         /etc/mtree/NetBSD.dist has been updated to take advantage of          8. Application software that writes time_t to binary files on
         absolute path support added to mtree(8). Older mtree(8)s don't             disk will break or need attention. Most notably: if you are
         understand the format.             using PostgreSQL < 8.4, you need to dump your databases,
              rebuild PostgreSQL with the new time_t, then restore.
         Solution: update and reinstall usr.sbin/mtree  
   20081219:
 20011004:          config(1) has been updated, and one of the files it creates -
         Crunchgen has been updated to work via reach-over makefiles. Updating          swapnetbsd.o - has changed format.  You need to rebuild config
         is suggested before running a snapshot build          (done automatically by build.sh) and then you need to rerun
           config on all kernel configuration files before rebuilding those
 20010915:          kernels.
         The new "ubcperf" code committed by Chuck Silvers removed  
         a header file, uvm/uvm_vnode.h.  There may be stale .depend  20081205:
         files that still reference this file.          If you build with MKX11=no, you should remove /etc/rc.d/xdm and
           /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
         Solution: "make cleandir && make dependall" in affected          set and will appear as extra files for MKX11=no update builds.
         directories.  
   20081122:
 20010803:          On i386, various kernel options(4) in GENERIC including
         grep.info is now built from grep.texi using makeinfo.  Since it          file systems have been disabled and moved into kernel modules.
         requires makeinfo v4.0, you need to install new texinfo before          Before trying a new GENERIC kernel, you have to prepare the
         building gnu/usr.bin/grep.  To install new texinfo, please follow          following files as well as a new GENERIC kernel:
         the instruction described in 20010726 entry.  
           - build and install kernel modules from src/sys/modules
 20010803:  
         (i386 only): i386 kernel now uses new instructions like          - install the latest bootloader, which will load a module
         `fxsave' which old gas doesn't understand.  To build the            for the file system from which the kernel is loaded automatically
         kernel successfully, you need to build and install new gas  
         (gnu/usr.bin/gas.new), or (temporarily) comment out          If you have to load your kernel from a file system which is not of
         "options I686_CPU" from your kernel configuration until you          the same type as the root file system, you have to load the necessary
         rebuilt your userland (and got a new gas).          file system module manually on the boot prompt or in the boot.cfg file.
   
 20010731:  20080827:
         Bootloader update on ELF platforms.  DDB in kernels from before          If you built and installed a libc from sources between
         this will be unable to read symbol tables provided by newer          2008/08/20 and 2008/08/26 you got a broken strtouq(3)
         bootloaders.          which results in false errors reported by lint(1).
           Since this breaks the libc build itself, manual help is
 20010726:          needed -- lint must be disabled temporarily, e.g.:
         Texinfo was updated to 4.0.  To avoid failures when trying to            $ (cd lib/libc && make MKLINT=no dependall install)
         build the included texinfo files, do:  
   20080813:
         cd src/gnu/usr.bin/texinfo          MKDEBUG build was broken because the .depend files did not know
         make MKINFO=no dependall install          about .go files. You need to remove all .depend files and rebuild.
   
 20010718:  20080802:
         Enabled correct .init/.fini processing in crt0.  The way this          A regression in binary compatibility for pthread_mutex_t has
         was done was to change a -I directive to cc(1), which means          been fixed. Unfortunately, the price is breaking compatibility
         make(1) will have a stale dependency (it will be checking the          for -current.
         timestamp on the wrong "dot_init.h").  
           Threaded programs (using libpthread) and C++ programs (using
         The symptom you will see is that new programs die with SIGSEGV          libstdc++) compiled after 20070907 and before 20080802 need to
         if you have a stale dependency.          be recompiled.
   
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so          One way to find affected pkgsrc packages:
         before starting your build.  
             $ grep REQUIRES=/usr/lib/libpthread /var/db/pkg/*/+BUILD_INFO
 20010628:            $ grep REQUIRES=/usr/lib/libstdc++ /var/db/pkg/*/+BUILD_INFO
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  20080731:
         bitfield, update your lint(1) before proceeding.          WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
 20010226:          and userland (fsck_ffs in particular).  Please make sure you
         Added named user/group to system. Need to hand add this in or builds          don't use a journaled filesystem with an older kernel/userland,
         will break as mtree aborts early.          especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
         To work around add by hand:          can use fsck_ffs -c 4 to update the superblock format.
   
         named:*:14:  20080721:
           Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
         to /etc/group and add:          isn't defined.
   
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  20080531:
           The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
         to master.passwd (use vipw for instance if doing by hand).          from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
           utility needs to be rebuilt and reinstalled as older binaries
         Now a make build should progress.          won't work correctly. The following sequence of commands:
   
 20010219:            $ (cd sys/sys/ && nbmake-$arch includes)
         get/setprogname() added. Any hostprogs that may use this will need            $ (cd sbin/drvctl/ && nbmake-$arch clean)
         to be bootstrapped manually until the host system is current.            $ (cd sbin/drvctl/ && nbmake-$arch all)
   
         Known problems: sys/arch/macppc/stand/fixcoff          leaves new drvctl utility in sbin/drvctl build directory.
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  20080503:
                         usr.sbin/mdsetimage - Build a static copy if          The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
                           building a snapshot before fully bootstrapped.  
   20080521:
 20010204:          For a while, unprivileged UPDATE builds would fail to
         prepare the code to compile with stricter gcc flags. in          succeed at the checkflist stage, complaining that
         particular start eliminating redundant declarations. Yacc          ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
         needs to be installed before make build.          problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
           If you already hit this problem, update the .mk file,
 20010114:          remove ${DESTDIR}/stand/<arch>, and re-run the build.
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  20080303:
         anything make and install in usr.bin/make, then proceed          Linker warnings are now fatal if $WARNS>0.
         with make build.  
   20080126:
 20010101:          The posix_fadvise system call has been changed from an assembly
         bsd.subdir.mk committed 20001230 had a bug which caused          stub, to a c file that calls an assembly stub. You need to
         afterinstall targets to run too soon; update again.          'rm -f posix_fadvise.* .depend' in the libc build directory to
           avoid using the old assembly stub.
 20001230:  
         New share/mk files needed to support .WAIT in SUBDIR variables.  20071209:
         If you get make errors,          The acpiec(4) driver has been split into two attachments. If you
                 (cd share/mk; make install)          get ACPI errors before the attachment, please update your kernel
         Also, PRINTOBJDIR has changed and is now used more heavily.          configuration file appropriately or see GENERIC for more details.
   
 20001019:  20071115:
         The `ca' device driver has been replaced by `ld'; although the          The it(4) driver has been renamed to itesio(4) and the old port
         major and minor numbers haven't changed, you should update your /dev          argument specified in the kernel configuration file is not valid
         directory.          anymore. The itesio(4) driver now uses the Super I/O address port
           rather than the EC address port. Please update your kernel
 20000929:          configuration file appropriately or see GENERIC for more details.
         The following make directives are obsoleted.  
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA  20071028:
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be          The pccons(4) driver has been removed from the NetBSD/shark port.
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build          You need to update any custom kernel configuration file you have
         additional library libcrypto_{idea,rc5}.          to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
           entries for the wscons driver.  See the GENERIC configuration file
           for more details.
   
   20070913:
           A latent bug in dhclient/dhcpd that caused it to be unable to
           enumerate interfaces was fixed.  The bug began to cause
           problems after 20070911 when the kernel's SIOCGIFCONF
           implementation was repaired.  From 20070529 to 20070911 racoon
           could not enumerate interfaces.  (These are noted because
           normal kernel/userspace version matching hygiene is not
           sufficient to avoid this problem.)  Ensure that both kernel
           and userland are from after 20070913.
   
   20070703:
           nbinstall has been renamed ${MACHINE_GNU_ARCH}-install. It
           calls the target-specific strip program, and the logic to pass
           down STRIP from make has been removed.  This requires a
           re-installation of tools.
   
   20070422:
           The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
           to userspace) namei() and lookup() directly check the emulation
           root. One side effect is that absolute symlinks inside the emulated
           root file system will be relative to that file system - unless they
           start /../ this is useful when the emulated root is a real install
           that has such links.
           This might affect symlinks that have been added to reference outside
           the emulated root.
   
   20070412:
           The pckbc driver on sgimips IP32 has been removed. Use macekbc
           instead. See the GENERIC32_IP3x kernel configuration for an
           example.
   
   20070319:
           src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
           updated and built after about 20070315, do "nbmake-$arch
           cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
           rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
           src/lib/libc/Makefile 1.130.
   
   20070210:
           src/sys/sys/{sa.h,savar.h} were removed.
             find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                 | xargs egrep -l '/sa.h|/savar.h' | xargs rm
           will allow dependencies on those files to get get rebuilt
   
   20070209:
           The threading model was changed when the newlock2 branch
           was merged to NetBSD-current.  If you boot with a new
           kernel (version 4.99.10), then you also need a new pthread
           library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
           (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
           the pthread library in sync, old threaded applications should
           continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
   
   20061214:
           Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
           will need to do a "make cleandir" in
                   tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
                   bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
           in order to excise stale references to the old stat_flags.h header
           file in the ls sources -- stat_flags.h has been removed.
   
   20061108:
           The configure script used in the src/tools/gcc compiler has been
           changed to indicate that our libc has ssp support built-in and
           does not depend on -lssp and -lssp-nonshared. You'll need to
           make clean in src/tools/gcc first to rebuild the compiler.
   
   20061009:
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
           available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
   20060814:
           The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
           withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
           few years should cope.
   
   20060703:
           MPACPI is no more. We always configure PCI interrupts using ACPI
           if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
   
   20060627:
           socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 233  Hints for a more successful build:
Line 345  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 241  Hints for a more successful build:
Line 355  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 290  for anyone who uses any make(1) features
Line 405  for anyone who uses any make(1) features
 #!/bin/sh  #!/bin/sh
 . /etc/mk.conf  . /etc/mk.conf
   
 if [ -z $BSDSRCDIR ] ; then  if [ -z $NETBSDSRCDIR ] ; then
     BSDSRCDIR=/usr/src      NETBSDSRCDIR=/usr/src
 fi  fi
 if [ \! -d $BSDSRCDIR ] ; then  if [ \! -d $NETBSDSRCDIR ] ; then
     echo Unable to find sources      echo Unable to find sources
     exit 1      exit 1
 fi  fi
 find $BSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;  find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
   
 if [ -z $BSDOBJDIR ] ; then  if [ -z $BSDOBJDIR ] ; then
     BSDOBJDIR=/usr/obj      BSDOBJDIR=/usr/obj
Line 306  if [ -d $BSDOBJDIR ] ; then
Line 421  if [ -d $BSDOBJDIR ] ; then
     rm -rf $BSDOBJDIR      rm -rf $BSDOBJDIR
 fi  fi
   
 cd $BSDSRCDIR && make cleandir  cd $NETBSDSRCDIR && make cleandir
   
 ---cut here---  ---cut here---
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs  
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
   
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 352  Fix: Try the following sequence of comma
Line 463  Fix: Try the following sequence of comma
         (If you built the tree without "make obj" in the past, obsolete files          (If you built the tree without "make obj" in the past, obsolete files
         may remain.  The command tries to clean everything up)          may remain.  The command tries to clean everything up)
   
 Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type  Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible
           pointer type
 Fix:    Rebuild and install usr.bin/menuc  Fix:    Rebuild and install usr.bin/menuc
   
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
   
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
   
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Legend:
Removed from v.1.56  
changed lines
  Added in v.1.208

CVSweb <webmaster@jp.NetBSD.org>