[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.174 and 1.198

version 1.174, 2008/07/23 00:29:35 version 1.198, 2009/07/09 07:31:54
Line 16  See also: BUILDING, build.sh, Makefile.
Line 16  See also: BUILDING, build.sh, Makefile.
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
   20090709:
           Native Xorg was upgraded again.  Builds will probably fail again
           without a clean objdir, at least for src/external/mit/xorg.
   
   20090616:
           Native Xorg was upgraded.  Builds will need a clean objdir for
           src/external/mit/xorg.  Upgrading a system from sets will not
           work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
           subdirectory has been changed into a file, and this needs to
           be manually "rm -r"'ed before installing xbase.tgz.
   
   20090501:
           Several new functions were added to string.h/libc, and this
           can cause autoconf problems during the tool build for people
           who fail to clean out their tools objects properly. If you
           note messages about stpcpy, stpncpy or strnlen accompanying a
           failure during the tool build, clean out all your tools
           objects and start again.
   
   20090325:
           The i386 port was switched to i486 default toolchain.  This requires
           cleaning your src/tools directory and $TOOLDIR and rebuilding them.
   
   20090126:
           The __posix_fadvise50 system call changed assembly stub type. You need to
           'rm -f __posix_fadvise50.*' in the libc build directory to avoid using
           the old assembly stub.
   
   20090202:
           pkg_install now depends on the pkgdb cache for automatic conflict
           detection.  It is recommented to rebuild the cache with
           ``pkg_admin rebuild''.
   
   20090110:
           time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
           1. Make sure your kernel has COMPAT_50 in it. Build and install.
              This is needed even in the MODULAR kernel because there is
              conditionally compiled code in rtsock.c.
           2. make sure build.sh completes and the binaries in a chroot work
              before installing.
           3. If you don't use build.sh and you build directly to root, and
              your build breaks in the middle, don't despair. Make sure headers
              are installed properly, and start building libraries first libc
              and libutil, install them and then continue building all the
              libraries in src/lib and src/gnu/lib and install them. Once
              the new libraries are installed, you can restart the build.
           4. If you compile packages and you notice link time warnings,
              rebuild the required packages to update their shared libraries.
              Any package you rebuild will require rebuilding all the packages
              that depend on it.
           5. Next time you run pwd_mkdb with the new binary, the file
              will be upgraded and it will not be backwards compatible.
           6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
              lastlogx(5)) have been versioned, and there is a heuristic
              for utmp. You are better off removing the old files after
              upgrading.  The automated clearing of /var/run during
              boot, and the automated rotating of files in /var/log by
              newsyslog(8), may mean that you do not have to remove the
              files manually.
           7. The optional accounting file (/var/account/acct, see
              accton(8)) has not been versioned, and will need to be
              removed.  The automatic rotation of the accounting file by
              /etc/daily limits the bad consequences of failure to remove
              the file.
           8. Application software that writes time_t to binary files on
              disk will break or need attention. Most notably: if you are
              using PostgreSQL < 8.4, you need to dump your databases,
              rebuild PostgreSQL with the new time_t, then restore.
   
   20081219:
           config(1) has been updated, and one of the files it creates -
           swapnetbsd.o - has changed format.  You need to rebuild config
           (done automatically by build.sh) and then you need to rerun
           config on all kernel configuration files before rebuilding those
           kernels.
   
   20081205:
           If you build with MKX11=no, you should remove /etc/rc.d/xdm and
           /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
           set and will appear as extra files for MKX11=no update builds.
   
   20081122:
           On i386, various kernel options(4) in GENERIC including
           file systems have been disabled and moved into kernel modules.
           Before trying a new GENERIC kernel, you have to prepare the
           following files as well as a new GENERIC kernel:
   
           - build and install kernel modules from src/sys/modules
   
           - install the latest bootloader, which will load a module
             for the file system from which the kernel is loaded automatically
   
           If you have to load your kernel from a file system which is not of
           the same type as the root file system, you have to load the necessary
           file system module manually on the boot prompt or in the boot.cfg file.
   
   20080827:
           If you built and installed a libc from sources between
           2008/08/20 and 2008/08/26 you got a broken strtouq(3)
           which results in false errors reported by lint(1).
           Since this breaks the libc build itself, manual help is
           needed -- lint must be disabled temporarily, e.g.:
             $ (cd lib/libc && make MKLINT=no dependall install)
   
   20080813:
           MKDEBUG build was broken because the .depend files did not know
           about .go files. You need to remove all .depend files and rebuild.
   
   20080731:
           WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
           and userland (fsck_ffs in particular).  Please make sure you
           don't use a journaled filesystem with an older kernel/userland,
           especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
           can use fsck_ffs -c 4 to update the superblock format.
   
 20080721:  20080721:
         Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR          Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
         isn't defined.          isn't defined.

Legend:
Removed from v.1.174  
changed lines
  Added in v.1.198

CVSweb <webmaster@jp.NetBSD.org>