[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.72 and 1.187

version 1.72, 2002/10/11 02:09:42 version 1.187, 2009/01/11 03:32:44
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
 20021010:  20090110:
         The config(8) grammar was changed to allow options to register          time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
         dependencies on attributes, as well as other options.  Users          1. Make sure your kernel has COMPAT_50 in it. Build and install.
         must update and reinstall usr.sbin/config before building a new          2. make sure build.sh completes and the binaries in a chroot work
         kernel.             before installing.
           3. If you don't use build.sh and you build directly to root, and
 20021009:             your build breaks in the middle, don't despair. Make sure headers
         A new attribute dependency syntax was introduced to config(8),             are installed properly, and start building libraries first libc
         which is now used by the SCSI configuration description.  Users             and libutil, install them and then continue building all the
         must update and reinstall usr.sbin/config before building a new             libraries in src/lib and src/gnu/lib and install them. Once
         kernel.             the new libraries are installed, you can restart the build.
           4. If you compile packages and you notice link time warnings,
 20021003:             you'll need to bump them and rebuild them.
         Several changes have been made to the autoconfiguration          5. Next time you run pwd_mkdb with the new binary, the file
         framework.  Users must update and reinstall usr.sbin/config             will be upgraded and it will not be backwards compatible.
         before building a new kernel.          6. The utmpx/wtmpx files have been versioned, and there is
              a heuristic for utmp. You are better off removing the
 20020922:             old files after upgrading.
         MKDYNAMICROOT=yes enabled by default, which means that  
         certain shared libraries are installed into /lib, the shared  20081219:
         linker is installed into /libexec, and all programs in /bin          config(1) has been updated, and one of the files it creates -
         and /sbin are dynamically linked.          swapnetbsd.o - has changed format.  You need to rebuild config
         If you do not use "make build", you should ensure that          (done automatically by build.sh) and then you need to rerun
         you have the libraries and shared linker in the new locations,          config on all kernel configuration files before rebuilding those
         with:          kernels.
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  
 20020917:          If you build with MKX11=no, you should remove /etc/rc.d/xdm and
         USE_NEW_TOOLCHAIN has been replaced with:          /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which          set and will appear as extra files for MKX11=no update builds.
                 there is no working in-tree toolchain (hppa, ns32k, sh5,  
                 x86_64).  20081122:
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the          On i386, various kernel options(4) in GENERIC including
                 root ofan external toolchain (e.g. /usr/local/gnu).  This          file systems have been disabled and moved into kernel modules.
                 enables the cross-build framework even for TOOLCHAIN_MISSING          Before trying a new GENERIC kernel, you have to prepare the
                 platforms.          following files as well as a new GENERIC kernel:
 20020906:          - build and install kernel modules from src/sys/modules
         gehenna-devsw has been merged into the trunk. Need to update and  
         reinstall usr.sbin/config before build the kernel.          - install the latest bootloader, which will load a module
             for the file system from which the kernel is loaded automatically
         Crunched rescue tools (contents of /bin and /sbin, plus others)          If you have to load your kernel from a file system which is not of
         are now provided in /rescue.          the same type as the root file system, you have to load the necessary
           file system module manually on the boot prompt or in the boot.cfg file.
         To ensure that these are built statically linked (no matter  
         what the setting of LDSTATIC is), use a crunchgen(1) built  20080827:
         from sources newer than 20020820 (see the next entry).          If you built and installed a libc from sources between
           2008/08/20 and 2008/08/26 you got a broken strtouq(3)
 20020820:          which results in false errors reported by lint(1).
         crunchgen(1) changed to ensure that the generated program          Since this breaks the libc build itself, manual help is
         is statically linked.          needed -- lint must be disabled temporarily, e.g.:
             $ (cd lib/libc && make MKLINT=no dependall install)
         Solution: update and reinstall usr.bin/crunch  
 20020515:          MKDEBUG build was broken because the .depend files did not know
         sshd user/group has been added.  Need to hand add this in, or sshd          about .go files. You need to remove all .depend files and rebuild.
         will not let you log in (with default, or UsePrivlegeSeparation=yes)  
         Add the following into /etc/group:          WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
         sshd:*:16:          and userland (fsck_ffs in particular).  Please make sure you
           don't use a journaled filesystem with an older kernel/userland,
         and the following to /etc/master.passwd (via vipw):          especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin          can use fsck_ffs -c 4 to update the superblock format.
         also /var/chroot/sshd directory needs to be present (digged as a part of  20080721:
         build process).          Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
           isn't defined.
         NBUILDJOBS obsoleted in favor of just using -j.  20080531:
           The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
 20020426:          from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
         etc/postinstall added, which performs various checks for          utility needs to be rebuilt and reinstalled as older binaries
         configuration file updates and changes, and can fix most of          won't work correctly. The following sequence of commands:
         the problems identified.  
         This should make it much easier to upgrade a system's            $ (cd sys/sys/ && nbmake-$arch includes)
         configuration from earlier systems (as far back as NetBSD 1.5).            $ (cd sbin/drvctl/ && nbmake-$arch clean)
             $ (cd sbin/drvctl/ && nbmake-$arch all)
         <bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.          leaves new drvctl utility in sbin/drvctl build directory.
         build and install at usr.bin/xinstall before the build.  
 20020319:          The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
         raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  be sure to have sbin/rtsol and usr.sbin/rtsold  20080521:
         newer than November 2001 when you upgrade the kernel.          For a while, unprivileged UPDATE builds would fail to
           succeed at the checkflist stage, complaining that
 20020311:          ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
         ssh configuration files were moved from /etc to /etc/ssh.  Beware          problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
         if you restart your machine from remote.  Note that sshd.conf needs          If you already hit this problem, update the .mk file,
         to be changed (due to the use of "/etc" inside).          remove ${DESTDIR}/stand/<arch>, and re-run the build.
 20020223:  20080303:
         Users of the VAX port will need to rebuild and install gas          Linker warnings are now fatal if $WARNS>0.
         so it deal with the now present register prefix used in all  
         the VAX assembly files.  20080126:
           The posix_fadvise system call has been changed from an assembly
 20020118:          stub, to a c file that calls an assembly stub. You need to
           'rm -f posix_fadvise.* .depend' in the libc build directory to
         ntpd user/group has been added.  Need to hand add this in or builds          avoid using the old assembly stub.
         will break as mtree aborts early.  
         Add the following into /etc/group:          The acpiec(4) driver has been split into two attachments. If you
           get ACPI errors before the attachment, please update your kernel
         ntpd:*:15:          configuration file appropriately or see GENERIC for more details.
         and the following to /etc/master.passwd (via vipw):  20071115:
           The it(4) driver has been renamed to itesio(4) and the old port
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin          argument specified in the kernel configuration file is not valid
           anymore. The itesio(4) driver now uses the Super I/O address port
 20011207:          rather than the EC address port. Please update your kernel
           configuration file appropriately or see GENERIC for more details.
         If you're attempting to build a snapshot on sparc64 and are getting  
         reloc errors from the toolchain groff binary this means your native  20071028:
         toolchain has some broken C++ bits.          The pccons(4) driver has been removed from the NetBSD/shark port.
           You need to update any custom kernel configuration file you have
         To fix:          to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
         Build a new toolchain (i.e. build.sh -t)          entries for the wscons driver.  See the GENERIC configuration file
         Use the new toolchain to build and install natively (i.e. /usr/lib)          for more details.
         gnu/lib/libgcc  20070913:
         gnu/lib/libstdc++          A latent bug in dhclient/dhcpd that caused it to be unable to
           enumerate interfaces was fixed.  The bug began to cause
         After this a snapshot will be able to be built.          problems after 20070911 when the kernel's SIOCGIFCONF
           implementation was repaired.  From 20070529 to 20070911 racoon
 20011201:          could not enumerate interfaces.  (These are noted because
         In order for a sparc64 build to work you must have a working awk. If          normal kernel/userspace version matching hygiene is not
         you've built and installed a system with the new toolchain up to this          sufficient to avoid this problem.)  Ensure that both kernel
         point you do not have a working awk as its ability to do floating          and userland are from after 20070913.
         point is broken.  
         To build:          nbinstall has been renamed as it calls the target specific and
           the logic to pass down STRIP from mk been removed.  This forces
         remake and install gnu/lib/libgcc          a re-installation of tools.
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  
         against the new libgcc.a)  20070422:
           The way OS emulations lookup filenames inside the emulation root
 20011128:          has been changed.  Rather than modify the pathname (and copy back
         Kernel config information was changed to use defflag in          to userspace) namei() and lookup() directly check the emulation
         the various "files" files.  Bug fixes to config(8) are          root. One side effect is that absolute symlinks inside the emulated
         required in order for this to work properly.  Make sure          root file system will be relative to that file system - unless they
         to build and install in usr.sbin/config before attempting          start /../ this is useful when the emulated root is a real install
         to build a new kernel.          that has such links.
           This might affect symlinks that have been added to reference outside
 20011030:          the emulated root.
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)  
         before building libc.  20070412:
           The pckbc driver on sgimips IP32 has been removed. Use macekbc
 20011029:          instead. See the GENERIC32_IP3x kernel configuration for an
         The new document BUILDING.mdoc (view with nroff | more, or          example.
         see pre-generated .txt and .html versions) describes the build  
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN  20070319:
         build process, are intended in the long run to replace this          src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
         manual update log.          on many platforms due to incorrect flags settings.  If you
           updated and built after about 20070315, do "nbmake-$arch
         Users building a USE_NEW_TOOLCHAIN system should read the          cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
         BUILDING document for caveats.  Generally, BUILDING supersedes          rebuild of object files that might have been built
         UPDATING for these systems, as tool updating is taken care of          incorrectly, and ensure that you have at least
         by the new build system.          src/lib/libc/Makefile 1.130.
 20011028:  20070210:
         src/etc/Makefile now needs install to be able to handle          src/sys/sys/{sa.h,savar.h} were removed.
         symlinks that point to nowhere. A bug in install that            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
         prevented this was corrected.                | xargs egrep -l '/sa.h|/savar.h' | xargs rm
           will allow dependencies on those files to get get rebuilt
         Solution: update and reinstall usr.bin/xinstall  
         Better Solution: Use the new toolchain and it will just work  20070209:
         for you.          The threading model was changed when the newlock2 branch
           was merged to NetBSD-current.  If you boot with a new
 20011006:          kernel (version 4.99.10), then you also need a new pthread
         /etc/mtree/NetBSD.dist has been updated to take advantage of          library (/usr/lib/libpthread.so.0.7).  If you boot with
         absolute path support added to mtree(8). Older mtree(8)s don't          an old kernel, then you need the old pthread library
         understand the format.          (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
           the pthread library in sync, old threaded applications should
         Solution: update and reinstall usr.sbin/mtree          continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
         Crunchgen has been updated to work via reach-over makefiles. Updating  20061214:
         is suggested before running a snapshot build          Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
 20010915:          will need to do a "make cleandir" in
         The new "ubcperf" code committed by Chuck Silvers removed                  tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
         a header file, uvm/uvm_vnode.h.  There may be stale .depend                  bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
         files that still reference this file.                  usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
         Solution: "make cleandir && make dependall" in affected          in order to excise stale references to the old stat_flags.h header
         directories.          file in the ls sources -- stat_flags.h has been removed.
 20010803:  20061108:
         grep.info is now built from grep.texi using makeinfo.  Since it          The configure script used in the src/tools/gcc compiler has been
         requires makeinfo v4.0, you need to install new texinfo before          changed to indicate that our libc has ssp support built-in and
         building gnu/usr.bin/grep.  To install new texinfo, please follow          does not depend on -lssp and -lssp-nonshared. You'll need to
         the instruction described in 20010726 entry.          make clean in src/tools/gcc first to rebuild the compiler.
 20010803:  20061009:
         (i386 only): i386 kernel now uses new instructions like          The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
         `fxsave' which old gas doesn't understand.  To build the          available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  20060814:
         from your kernel configuration until you rebuild your userland.          The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
         See 20011029 above and BUILDING file in this directory for more information.          withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]          kernel configuration for an example.  X servers from the last
           few years should cope.
         Bootloader update on ELF platforms.  DDB in kernels from before  20060703:
         this will be unable to read symbol tables provided by newer          MPACPI is no more. We always configure PCI interrupts using ACPI
         bootloaders.          if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
         Texinfo was updated to 4.0.  To avoid failures when trying to  20060627:
         build the included texinfo files, do:          socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
         cd src/gnu/usr.bin/texinfo          your kernel has 'options COMPAT_30' set, or else 'bad system call'
         make MKINFO=no dependall install          errors will result.
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
         To work around add by hand:  
         to /etc/group and add:  
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
         to master.passwd (use vipw for instance if doing by hand).  
         Now a make build should progress.  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         The following make directives are obsoleted.  
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be  
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build  
         additional library libcrypto_{idea,rc5}.  
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 315  Hints for a more successful build:
Line 252  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 323  Hints for a more successful build:
Line 262  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 394  cd $NETBSDSRCDIR && make cleandir
Line 334  cd $NETBSDSRCDIR && make cleandir
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 440  Fix: Rebuild and install usr.bin/menuc
Line 376  Fix: Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Removed from v.1.72  
changed lines
  Added in v.1.187

CVSweb <webmaster@jp.NetBSD.org>