[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.39 and 1.187

version 1.39, 2001/10/04 04:27:48 version 1.187, 2009/01/11 03:32:44
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20011004:  20090110:
           time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
         Crunchgen has been updated to work via reach-over makefiles. Updating          1. Make sure your kernel has COMPAT_50 in it. Build and install.
         is suggested before running a snapshot build          2. make sure build.sh completes and the binaries in a chroot work
              before installing.
 20010922:          3. If you don't use build.sh and you build directly to root, and
         The new toolchain is enabled on i386.  This new build method             your build breaks in the middle, don't despair. Make sure headers
         is intended to make all the upgrade issues elsewhere in UPDATING             are installed properly, and start building libraries first libc
         obsolete (stay tuned...).             and libutil, install them and then continue building all the
              libraries in src/lib and src/gnu/lib and install them. Once
         i386 platform builds must now set TOOLDIR in mk.conf or the             the new libraries are installed, you can restart the build.
         environment in order to build the system.  This is a pathname          4. If you compile packages and you notice link time warnings,
         where host build tools will be installed, and must NOT be             you'll need to bump them and rebuild them.
         the same as src/tools.          5. Next time you run pwd_mkdb with the new binary, the file
              will be upgraded and it will not be backwards compatible.
         (Optionally, USETOOLS=no can be set in the environment if you          6. The utmpx/wtmpx files have been versioned, and there is
         wish to avoid using the separate host toolchain for building a             a heuristic for utmp. You are better off removing the
         subtree.  Otherwise, this will default to "yes" automatically.)             old files after upgrading.
   
 20010915:  20081219:
         The new "ubcperf" code committed by Chuck Silvers removed          config(1) has been updated, and one of the files it creates -
         a header file, uvm/uvm_vnode.h.  There may be stale .depend          swapnetbsd.o - has changed format.  You need to rebuild config
         files that still reference this file.          (done automatically by build.sh) and then you need to rerun
           config on all kernel configuration files before rebuilding those
         Solution: "make cleandir && make dependall" in affected          kernels.
         directories.  
   20081205:
 20010803:          If you build with MKX11=no, you should remove /etc/rc.d/xdm and
         grep.info is now built from grep.texi using makeinfo.  Since it          /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
         requires makeinfo v4.0, you need to install new texinfo before          set and will appear as extra files for MKX11=no update builds.
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  20081122:
           On i386, various kernel options(4) in GENERIC including
 20010803:          file systems have been disabled and moved into kernel modules.
         (i386 only): i386 kernel now uses new instructions like fxsave which          Before trying a new GENERIC kernel, you have to prepare the
         old gas doesn't understand.  To build the kernel successfuly, you          following files as well as a new GENERIC kernel:
         need to build and install new gas (gnu/usr.bin/gas.new).  
           - build and install kernel modules from src/sys/modules
 20010731:  
         Bootloader update on ELF platforms.  DDB in kernels from before          - install the latest bootloader, which will load a module
         this will be unable to read symbol tables provided by newer            for the file system from which the kernel is loaded automatically
         bootloaders.  
           If you have to load your kernel from a file system which is not of
 20010726:          the same type as the root file system, you have to load the necessary
         Texinfo was updated to 4.0.  To avoid failures when trying to          file system module manually on the boot prompt or in the boot.cfg file.
         build the included texinfo files, do:  
   20080827:
         cd src/gnu/usr.bin/texinfo          If you built and installed a libc from sources between
         make MKINFO=no dependall install          2008/08/20 and 2008/08/26 you got a broken strtouq(3)
           which results in false errors reported by lint(1).
 20010718:          Since this breaks the libc build itself, manual help is
           needed -- lint must be disabled temporarily, e.g.:
         Enabled correct .init/.fini processing in crt0.  The way this            $ (cd lib/libc && make MKLINT=no dependall install)
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  20080813:
         timestamp on the wrong "dot_init.h").          MKDEBUG build was broken because the .depend files did not know
           about .go files. You need to remove all .depend files and rebuild.
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  20080731:
           WAPBL (metadata journaling support) has been added, but at this
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so          time isn't backwards compatible with pre-WAPBL aware kernels
         before starting your build.          and userland (fsck_ffs in particular).  Please make sure you
           don't use a journaled filesystem with an older kernel/userland,
 20010628:          especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
         A construct was added to uvm_page.h that uncovered a bug          can use fsck_ffs -c 4 to update the superblock format.
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  20080721:
           Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
 20010226:          isn't defined.
   
         Added named user/group to system. Need to hand add this in or builds  20080531:
         will break as mtree aborts early.          The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
           from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
         To work around add by hand:          utility needs to be rebuilt and reinstalled as older binaries
           won't work correctly. The following sequence of commands:
         named:*:14:  
             $ (cd sys/sys/ && nbmake-$arch includes)
         to /etc/group and add:            $ (cd sbin/drvctl/ && nbmake-$arch clean)
             $ (cd sbin/drvctl/ && nbmake-$arch all)
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
           leaves new drvctl utility in sbin/drvctl build directory.
         to master.passwd (use vipw for instance if doing by hand).  
   20080503:
         Now a make build should progress.          The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
   
 20010219:  20080521:
         get/setprogname() added. Any hostprog's that may use this will need          For a while, unprivileged UPDATE builds would fail to
         to be bootstrapped manually until the host system is current.          succeed at the checkflist stage, complaining that
           ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
         Known problems: sys/arch/macppc/stand/fixcoff          problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to          If you already hit this problem, update the .mk file,
                           CFLAGS and rebuilding should work)          remove ${DESTDIR}/stand/<arch>, and re-run the build.
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  20080303:
           Linker warnings are now fatal if $WARNS>0.
 20010204:  
         prepare the code to compile with stricter gcc flags. in  20080126:
         particular start eliminating redundant declarations. Yacc          The posix_fadvise system call has been changed from an assembly
         needs to be installed before make build.          stub, to a c file that calls an assembly stub. You need to
           'rm -f posix_fadvise.* .depend' in the libc build directory to
 20010114:          avoid using the old assembly stub.
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  20071209:
         anything make and install in usr.bin/make, then proceed          The acpiec(4) driver has been split into two attachments. If you
         with make build.          get ACPI errors before the attachment, please update your kernel
           configuration file appropriately or see GENERIC for more details.
 20010101:  
         bsd.subdir.mk committed 20001230 had a bug which caused  20071115:
         afterinstall targets to run too soon; update again.          The it(4) driver has been renamed to itesio(4) and the old port
           argument specified in the kernel configuration file is not valid
 20001230:          anymore. The itesio(4) driver now uses the Super I/O address port
         New share/mk files needed to support .WAIT in SUBDIR variables.          rather than the EC address port. Please update your kernel
         If you get make errors,          configuration file appropriately or see GENERIC for more details.
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  20071028:
           The pccons(4) driver has been removed from the NetBSD/shark port.
 20001019:          You need to update any custom kernel configuration file you have
         The `ca' device driver has been replaced by `ld'; although the          to remove any references to pccons (which includes removing the
         major and minor numbers haven't changed, you should update your /dev          now useless XSERVER option) and replace them with the correct
         directory.          entries for the wscons driver.  See the GENERIC configuration file
           for more details.
 20000929:  
         The following make directives are obsoleted.  20070913:
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA          A latent bug in dhclient/dhcpd that caused it to be unable to
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be          enumerate interfaces was fixed.  The bug began to cause
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build          problems after 20070911 when the kernel's SIOCGIFCONF
         additional library libcrypto_{idea,rc5}.          implementation was repaired.  From 20070529 to 20070911 racoon
           could not enumerate interfaces.  (These are noted because
 20000623:          normal kernel/userspace version matching hygiene is not
         MKCRYPTO and friends added to share/mk/bsd.own.mk.          sufficient to avoid this problem.)  Ensure that both kernel
         'cd share/mk ; make install' needed before make build.          and userland are from after 20070913.
   
   20070703:
           nbinstall has been renamed as it calls the target specific and
           the logic to pass down STRIP from mk been removed.  This forces
           a re-installation of tools.
   
   20070422:
           The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
           to userspace) namei() and lookup() directly check the emulation
           root. One side effect is that absolute symlinks inside the emulated
           root file system will be relative to that file system - unless they
           start /../ this is useful when the emulated root is a real install
           that has such links.
           This might affect symlinks that have been added to reference outside
           the emulated root.
   
   20070412:
           The pckbc driver on sgimips IP32 has been removed. Use macekbc
           instead. See the GENERIC32_IP3x kernel configuration for an
           example.
   
   20070319:
           src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
           updated and built after about 20070315, do "nbmake-$arch
           cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
           rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
           src/lib/libc/Makefile 1.130.
   
   20070210:
           src/sys/sys/{sa.h,savar.h} were removed.
             find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                 | xargs egrep -l '/sa.h|/savar.h' | xargs rm
           will allow dependencies on those files to get get rebuilt
   
   20070209:
           The threading model was changed when the newlock2 branch
           was merged to NetBSD-current.  If you boot with a new
           kernel (version 4.99.10), then you also need a new pthread
           library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
           (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
           the pthread library in sync, old threaded applications should
           continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
   
   20061214:
           Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
           will need to do a "make cleandir" in
                   tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
                   bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
           in order to excise stale references to the old stat_flags.h header
           file in the ls sources -- stat_flags.h has been removed.
   
   20061108:
           The configure script used in the src/tools/gcc compiler has been
           changed to indicate that our libc has ssp support built-in and
           does not depend on -lssp and -lssp-nonshared. You'll need to
           make clean in src/tools/gcc first to rebuild the compiler.
   
   20061009:
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
           available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
   20060814:
           The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
           withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
           few years should cope.
   
   20060703:
           MPACPI is no more. We always configure PCI interrupts using ACPI
           if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
   
   20060627:
           socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 154  Hints for a more successful build:
Line 252  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 162  Hints for a more successful build:
Line 262  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 211  for anyone who uses any make(1) features
Line 312  for anyone who uses any make(1) features
 #!/bin/sh  #!/bin/sh
 . /etc/mk.conf  . /etc/mk.conf
   
 if [ -z $BSDSRCDIR ] ; then  if [ -z $NETBSDSRCDIR ] ; then
     BSDSRCDIR=/usr/src      NETBSDSRCDIR=/usr/src
 fi  fi
 if [ \! -d $BSDSRCDIR ] ; then  if [ \! -d $NETBSDSRCDIR ] ; then
     echo Unable to find sources      echo Unable to find sources
     exit 1      exit 1
 fi  fi
 find $BSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;  find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
   
 if [ -z $BSDOBJDIR ] ; then  if [ -z $BSDOBJDIR ] ; then
     BSDOBJDIR=/usr/obj      BSDOBJDIR=/usr/obj
Line 227  if [ -d $BSDOBJDIR ] ; then
Line 328  if [ -d $BSDOBJDIR ] ; then
     rm -rf $BSDOBJDIR      rm -rf $BSDOBJDIR
 fi  fi
   
 cd $BSDSRCDIR && make cleandir  cd $NETBSDSRCDIR && make cleandir
   
 ---cut here---  ---cut here---
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs  
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
   
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
         Or, a failsafe method if that doesn't work:          Or, a failsafe method if that doesn't work:
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin          cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 279  Fix: Rebuild and install usr.bin/menuc
Line 376  Fix: Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
 Fix:    Build and install usr.bin/mklocale  Fix:    Build and install usr.bin/mklocale
   
 Symptom:undefined reference to `__assert13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
   
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Legend:
Removed from v.1.39  
changed lines
  Added in v.1.187

CVSweb <webmaster@jp.NetBSD.org>