[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.180 and 1.229.2.3

version 1.180, 2008/11/26 19:00:34 version 1.229.2.3, 2012/10/30 18:46:04
Line 16  See also: BUILDING, build.sh, Makefile.
Line 16  See also: BUILDING, build.sh, Makefile.
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
   20120726:
           The update of OpenSSL requires cleaning both the OpenSSL build
           directory and DESTDIR.  *Even non-update builds require cleaning
           DESTDIR.* Builds done without taking these steps may fail, or in
           some cases may succeed and install broken OpenSSL libraries that
           cause third-party software to link incorrectly and/or crash.
   
   20120507:
           The database schema for makemandb was changed.  You will
           need to update the database using 'makemandb -f' or wait
           for the next weekly run to fix it.
   
   20120319:
           sys/conf/Makefile.kern.inc has been modified to adjust the
           size of db_symtab automatically.  You need to update dbsym in
           your $TOOLDIR to build kernels with options SYMTAB_SPACE.  If
           you don't want this behavior, add AUTO_SYMTAB_SPACE=no to your
           mk.conf.
   
   20120216:
           Default for MKCATPAGES changed to NO.  Update builds will fail
           unless DESTDIR is cleaned manually.  If you built between 20120207
           and 20120216, daily and weekly could have created an unreadable
           /var/db/man.db index for apropos.  Running makemandb -f or
           the next run of weekly will fix it.
   
   20111227:
           If you built between 20111225 and 20111227 you need to remove
           /usr/lib/libpam.so.4* and /usr/lib/security/*.so.4, since the
           bump has been reverted.
   
   20111125:
           The "rnd" pseudodevice has been added to sys/conf/std, which
           means it should no longer be explicitly listed in kernel
           configuration files.  The line "pseudo-device rnd" should be
           removed from any custom kernel config files users may have.
   
   20111119:
           A problem with the datastructures used by the rndctl(8)
           utility (pointers in datastructures in an array, making 32->64
           bit compatibility very painful) has been fixed in a
           non-backwards-compatible way.  If you replace your kernel,
           replace your rndctl executable too.
   
   20111001:
           the prop_*_send_syscall() functions from proplib(3) have been
           changed and their new version is not backward compatible with the old
           one.  So ensure that all consumers of these functions (currently:
           quota2 code and its tests) are updated together with the new lib.
   
   20110817:
           sparc has been changed to use GCC 4.5.3, so any objdir or
           DESTDIR for them should be deleted before updating.
   
   20110806:
           i386 and amd64 have been changed to use GCC 4.5.3, so any
           objdir or DESTDIR for them should be deleted before updating.
   
   20110805:
           The update to GCC 4.5.3 requires a non-trivial portion of
           the tree to be cleaned.  Best to delete both objdir and
           DESTDIR before running this update.  So far, only the
           sparc64, mips and powerpc platforms have changed.
   
   20110803:
           The layout of external/public-domain/xz has changed.  To do an
           update build you will have to remove the contents of the OBJDIR
           for external/public-domain/xz/bin by hand as the xz entry there
           is now a directory.
   
   20110410:
           The configuration of src/tools/gcc has changed.  To do an
           update build you have to clean both tools/binutils and
           tools/gcc by hand.
   
   20110328:
           Building the Xorg binary was moved into a subdirectory to fix
           ordering issues with "make all".  It may be necessary to remove
           the OBJDIR for external/mit/xorg/server/xorg-server/hw/xfree86
           if your update build fails, as the "Xorg" entry there is now a
           directory.
   
   20110121:
           Assembler files no longer use -traditional-cpp.  This can break
           the build of individual parts of the tree.  This is handled
           correctly by build.sh.  Manual builds have to update /usr/share/mk
           and re-run config(1) for any kernel configurations as needed.
   
   20101217:
           The tcpdump(8) program was changed to drop privileges and chroot(2)
           by default.  It may be necessary to manually update passwd(5) and
           group(5) in order to make the program work with existing setups.
   
   20101125:
           The latest changes to setenv(3) dissallow setting environment
           variables with names that contain '='.  Revision 1.18 of env.c
           assumed that this was allowed.  Installing a new libc with an
           old copy of /usr/bin/env causes env x=1 printenv | grep x= to
           break which affects the autoconf tests for dependency finding,
           so building gcc will end up printing:
               checking dependency style of gcc... none
               configure: error: no usable dependency style found
           Fix it by rebuilding and re-installing env.
   
   20101119:
           Recent Xorg updates in xsrc/external/mit/ may cause various build
           or run-time problems.  Delete your entire DESTDIR and OBJDIR if you
           have any build problems with xsrc, or problems with mismatched
           versions between xorg-server and drivers.
   
   20100604:
           The update of ATF to 0.9 causes old tests written in shell to fail
           unless they are rebuilt.  If you are building with MKUPDATE=yes,
           you need to clean the src/external/bsd/atf/tests/ and the src/tests/
           trees by hand.
   
   20100522:
           Recent Xorg updates in xsrc/external/mit/ will cause various build
           problems.  Delete your entire DESTDIR and OBJDIR if you have any
           build problems with xsrc.
   
   20100522:
           private section of <ctype.h> was splitted, and now mklocale(1)
           include ctype_local.h, so you have to make cleandir in tools/mklocale.
   
   20100520:
           The location of the xkb compiled descriptions has changed.  Please
           remove usr/X11R7/lib/X11/xkb/compiled from your $DESTDIR.
   
   20100222:
           The shared objects file extension has been changed from .so to
           .pico, in order to avoid conflicts with shared libraries names
           libXX.so.  All now stale regular .so files can be removed from
           your object directories.
   
   20100204:
           The termcap database has been removed from the sources,
           but has not been marked obsolete so it is not removed
           from the system when upgrading.
           As such, you will need to remove them from your object
           and destination directories.
   
   20091101:
           After updating, it may be necessary to make the 'cleandir'
           target in src/tools/yacc/ and in src/usr.bin/yacc/ before a
           'build.sh -u tools' or 'build.sh -u distribution'.  Ditto
           src/tools/lex/ and src/usr.bin/lex/.
   
   20091001:
           On amd64 you must rebuild tools (to get the new binutils)
           before building a kernel, or the build fails on cpufunc.S.
   
   20091001:
           An error will create a ./usr/X11R7/lib/X11/xkb/compiled/xkb
           symlink, failing the build.  Delete the link, and the subdir
           it is in, and retry your build.
   
   20090718:
           libc build changed so that strchr() provides the extra entry
           point for index().  Update build of libc.a (and libc_pic.a)
           may fail because the archive contains the unwanted index.o.
           (Similarly for strrchr() and rindex().)
   
   20090709:
           Native Xorg was upgraded again.  Builds will probably fail again
           without a clean objdir, at least for src/external/mit/xorg.
   
   20090616:
           Native Xorg was upgraded.  Builds will need a clean objdir for
           src/external/mit/xorg.  Upgrading a system from sets will not
           work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
           subdirectory has been changed into a file, and this needs to
           be manually "rm -r"'ed before installing xbase.tgz.
   
   20090501:
           Several new functions were added to string.h/libc, and this
           can cause autoconf problems during the tool build for people
           who fail to clean out their tools objects properly.  If you
           note messages about stpcpy, stpncpy or strnlen accompanying a
           failure during the tool build, clean out all your tools
           objects and start again.
   
   20090325:
           The i386 port was switched to i486 default toolchain.  This requires
           cleaning your src/tools directory and $TOOLDIR and rebuilding them.
   
   20090126:
           The __posix_fadvise50 system call changed assembly stub type.  You
           need to 'rm -f __posix_fadvise50.*' in the libc build directory
           to avoid using the old assembly stub.
   
   20090202:
           pkg_install now depends on the pkgdb cache for automatic conflict
           detection.  It is recommented to rebuild the cache with
           ``pkg_admin rebuild''.
   
   20090110:
           time_t and dev_t have been bumped to 64 bit quantities.  To upgrade:
           1. Make sure your kernel has COMPAT_50 in it.  Build and install.
              This is needed even in the MODULAR kernel because there is
              conditionally compiled code in rtsock.c.
           2. make sure build.sh completes and the binaries in a chroot work
              before installing.
           3. If you don't use build.sh and you build directly to root, and
              your build breaks in the middle, don't despair.  Make sure headers
              are installed properly, and start building libraries first libc
              and libutil, install them and then continue building all the
              libraries in src/lib and src/gnu/lib and install them.  Once
              the new libraries are installed, you can restart the build.
           4. If you compile packages and you notice link time warnings,
              rebuild the required packages to update their shared libraries.
              Any package you rebuild will require rebuilding all the packages
              that depend on it.
           5. Next time you run pwd_mkdb with the new binary, the file
              will be upgraded and it will not be backwards compatible.
           6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
              lastlogx(5)) have been versioned, and there is a heuristic
              for utmp.  You are better off removing the old files after
              upgrading.  The automated clearing of /var/run during
              boot, and the automated rotating of files in /var/log by
              newsyslog(8), may mean that you do not have to remove the
              files manually.
           7. The optional accounting file (/var/account/acct, see
              accton(8)) has not been versioned, and will need to be
              removed.  The automatic rotation of the accounting file by
              /etc/daily limits the bad consequences of failure to remove
              the file.
           8. Application software that writes time_t to binary files on
              disk will break or need attention.  Most notably: if you are
              using PostgreSQL < 8.4, you need to dump your databases,
              rebuild PostgreSQL with the new time_t, then restore.
   
   20081219:
           config(1) has been updated, and one of the files it creates -
           swapnetbsd.o - has changed format.  You need to rebuild config
           (done automatically by build.sh) and then you need to rerun
           config on all kernel configuration files before rebuilding those
           kernels.
   
   20081205:
           If you build with MKX11=no, you should remove /etc/rc.d/xdm and
           /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
           set and will appear as extra files for MKX11=no update builds.
   
 20081122:  20081122:
         On i386 and amd64, various kernel options(4) in GENERIC including          On i386, various kernel options(4) in GENERIC including
         file systems have been disabled and moved into kernel modules.          file systems have been disabled and moved into kernel modules.
         Before trying a new GENERIC kernel, you have to prepare the          Before trying a new GENERIC kernel, you have to prepare the
         following files as well as a new GENERIC kernel:          following files as well as a new GENERIC kernel:
Line 42  Recent changes:
Line 285  Recent changes:
   
 20080813:  20080813:
         MKDEBUG build was broken because the .depend files did not know          MKDEBUG build was broken because the .depend files did not know
         about .go files. You need to remove all .depend files and rebuild.          about .go files.  You need to remove all .depend files and rebuild.
   
   20080802:
           A regression in binary compatibility for pthread_mutex_t has
           been fixed.  Unfortunately, the price is breaking compatibility
           for -current.
   
           Threaded programs (using libpthread) and C++ programs (using
           libstdc++) compiled after 20070907 and before 20080802 need to
           be recompiled.
   
           One way to find affected pkgsrc packages:
   
             $ grep REQUIRES=/usr/lib/libpthread /var/db/pkg/*/+BUILD_INFO
             $ grep REQUIRES=/usr/lib/libstdc++ /var/db/pkg/*/+BUILD_INFO
   
 20080731:  20080731:
         WAPBL (metadata journaling support) has been added, but at this          WAPBL (metadata journaling support) has been added, but at this
Line 58  Recent changes:
Line 315  Recent changes:
         isn't defined.          isn't defined.
   
 20080531:  20080531:
         The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed          The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
         from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)          from 125 (conflicted with DRVCTLCOMMAND) to 129.  The drvctl(8)
         utility needs to be rebuilt and reinstalled as older binaries          utility needs to be rebuilt and reinstalled as older binaries
         won't work correctly. The following sequence of commands:          won't work correctly.  The following sequence of commands:
   
           $ (cd sys/sys/ && nbmake-$arch includes)            $ (cd sys/sys/ && nbmake-$arch includes)
           $ (cd sbin/drvctl/ && nbmake-$arch clean)            $ (cd sbin/drvctl/ && nbmake-$arch clean)
Line 85  Recent changes:
Line 342  Recent changes:
   
 20080126:  20080126:
         The posix_fadvise system call has been changed from an assembly          The posix_fadvise system call has been changed from an assembly
         stub, to a c file that calls an assembly stub. You need to          stub, to a c file that calls an assembly stub.  You need to
         'rm -f posix_fadvise.* .depend' in the libc build directory to          'rm -f posix_fadvise.* .depend' in the libc build directory to
         avoid using the old assembly stub.          avoid using the old assembly stub.
   
 20071209:  20071209:
         The acpiec(4) driver has been split into two attachments. If you          The acpiec(4) driver has been split into two attachments.  If you
         get ACPI errors before the attachment, please update your kernel          get ACPI errors before the attachment, please update your kernel
         configuration file appropriately or see GENERIC for more details.          configuration file appropriately or see GENERIC for more details.
   
 20071115:  20071115:
         The it(4) driver has been renamed to itesio(4) and the old port          The it(4) driver has been renamed to itesio(4) and the old port
         argument specified in the kernel configuration file is not valid          argument specified in the kernel configuration file is not valid
         anymore. The itesio(4) driver now uses the Super I/O address port          anymore.  The itesio(4) driver now uses the Super I/O address port
         rather than the EC address port. Please update your kernel          rather than the EC address port.  Please update your kernel
         configuration file appropriately or see GENERIC for more details.          configuration file appropriately or see GENERIC for more details.
   
 20071028:  20071028:
Line 120  Recent changes:
Line 377  Recent changes:
         and userland are from after 20070913.          and userland are from after 20070913.
   
 20070703:  20070703:
         nbinstall has been renamed as it calls the target specific and          nbinstall has been renamed ${MACHINE_GNU_ARCH}-install.  It
         the logic to pass down STRIP from mk been removed.  This forces          calls the target-specific strip program, and the logic to pass
         a re-installation of tools.          down STRIP from make has been removed.  This requires a
           re-installation of tools.
   
 20070422:  20070422:
         The way OS emulations lookup filenames inside the emulation root          The way OS emulations lookup filenames inside the emulation root
         has been changed.  Rather than modify the pathname (and copy back          has been changed.  Rather than modify the pathname (and copy back
         to userspace) namei() and lookup() directly check the emulation          to userspace) namei() and lookup() directly check the emulation
         root. One side effect is that absolute symlinks inside the emulated          root.  One side effect is that absolute symlinks inside the emulated
         root file system will be relative to that file system - unless they          root file system will be relative to that file system - unless they
         start /../ this is useful when the emulated root is a real install          start /../ this is useful when the emulated root is a real install
         that has such links.          that has such links.
Line 136  Recent changes:
Line 394  Recent changes:
         the emulated root.          the emulated root.
   
 20070412:  20070412:
         The pckbc driver on sgimips IP32 has been removed. Use macekbc          The pckbc driver on sgimips IP32 has been removed.  Use macekbc
         instead. See the GENERIC32_IP3x kernel configuration for an          instead.  See the GENERIC32_IP3x kernel configuration for an
         example.          example.
   
 20070319:  20070319:
Line 149  Recent changes:
Line 407  Recent changes:
         incorrectly, and ensure that you have at least          incorrectly, and ensure that you have at least
         src/lib/libc/Makefile 1.130.          src/lib/libc/Makefile 1.130.
   
 20070210:  20070210:
         src/sys/sys/{sa.h,savar.h} were removed.          src/sys/sys/{sa.h,savar.h} were removed.
           find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
               | xargs egrep -l '/sa.h|/savar.h' | xargs rm                | xargs egrep -l '/sa.h|/savar.h' | xargs rm
Line 180  Recent changes:
Line 438  Recent changes:
 20061108:  20061108:
         The configure script used in the src/tools/gcc compiler has been          The configure script used in the src/tools/gcc compiler has been
         changed to indicate that our libc has ssp support built-in and          changed to indicate that our libc has ssp support built-in and
         does not depend on -lssp and -lssp-nonshared. You'll need to          does not depend on -lssp and -lssp-nonshared.  You'll need to
         make clean in src/tools/gcc first to rebuild the compiler.          make clean in src/tools/gcc first to rebuild the compiler.
   
 20061009:  20061009:
         The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer          The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
         available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.          available.  Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
 20060814:  20060814:
         The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been          The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
Line 194  Recent changes:
Line 452  Recent changes:
         few years should cope.          few years should cope.
   
 20060703:  20060703:
         MPACPI is no more. We always configure PCI interrupts using ACPI          MPACPI is no more.  We always configure PCI interrupts using ACPI
         if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed          if we have an ACPI kernel.  The option MPACPI_SCANPCI has been renamed
         to ACPI_SCANPCI. Thanks to work from fvdl.          to ACPI_SCANPCI.  Thanks to work from fvdl.
   
 20060627:  20060627:
         socket(2) has changed, and its system call has been versioned.          socket(2) has changed, and its system call has been versioned.
Line 247  Hints for a more successful build:
Line 505  Hints for a more successful build:
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.  If you use build.sh, you should not have          date functionality.  If you use build.sh, you should not have
         this problem.          this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 When things don't work there is usually a few things that commonly  When things don't work there are usually a few things that commonly
 should be done.  should be done.
     1)  make includes      1)  make includes
         This should be done automatically by make build.          This should be done automatically by make build.
Line 340  Fix: Try the following sequence of comma
Line 598  Fix: Try the following sequence of comma
         (If you built the tree without "make obj" in the past, obsolete files          (If you built the tree without "make obj" in the past, obsolete files
         may remain.  The command tries to clean everything up)          may remain.  The command tries to clean everything up)
   
 Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type  Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible
           pointer type
 Fix:    Rebuild and install usr.bin/menuc  Fix:    Rebuild and install usr.bin/menuc
   
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
Line 357  Fix:    Rebuild and install lib/libc
Line 616  Fix:    Rebuild and install lib/libc
   
 Symptom:lint does not understand the '-X' option  Symptom:lint does not understand the '-X' option
 Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint  Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint
   
   Symptom:Update build fails in src/tools/gcc complaining that a variable
           (e.g. CPPFLAGS) has changed since the previous run.
   Fix:    Run "nbmake-${ARCH} clean" in src/tools/gcc or do a clean build.

Legend:
Removed from v.1.180  
changed lines
  Added in v.1.229.2.3

CVSweb <webmaster@jp.NetBSD.org>