[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.2 and 1.180

version 1.2, 2000/08/20 15:43:43 version 1.180, 2008/11/26 19:00:34
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
   
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
   
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20000623:  
         MKCRYPTO and friends added to share/mk/bsd.own.mk.  
         'cd share/mk ; make install' needed before make build.  
   
   20081122:
           On i386 and amd64, various kernel options(4) in GENERIC including
           file systems have been disabled and moved into kernel modules.
           Before trying a new GENERIC kernel, you have to prepare the
           following files as well as a new GENERIC kernel:
   
           - build and install kernel modules from src/sys/modules
   
           - install the latest bootloader, which will load a module
             for the file system from which the kernel is loaded automatically
   
           If you have to load your kernel from a file system which is not of
           the same type as the root file system, you have to load the necessary
           file system module manually on the boot prompt or in the boot.cfg file.
   
   20080827:
           If you built and installed a libc from sources between
           2008/08/20 and 2008/08/26 you got a broken strtouq(3)
           which results in false errors reported by lint(1).
           Since this breaks the libc build itself, manual help is
           needed -- lint must be disabled temporarily, e.g.:
             $ (cd lib/libc && make MKLINT=no dependall install)
   
   20080813:
           MKDEBUG build was broken because the .depend files did not know
           about .go files. You need to remove all .depend files and rebuild.
   
   20080731:
           WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
           and userland (fsck_ffs in particular).  Please make sure you
           don't use a journaled filesystem with an older kernel/userland,
           especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
           can use fsck_ffs -c 4 to update the superblock format.
   
   20080721:
           Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
           isn't defined.
   
   20080531:
           The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
           from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
           utility needs to be rebuilt and reinstalled as older binaries
           won't work correctly. The following sequence of commands:
   
             $ (cd sys/sys/ && nbmake-$arch includes)
             $ (cd sbin/drvctl/ && nbmake-$arch clean)
             $ (cd sbin/drvctl/ && nbmake-$arch all)
   
           leaves new drvctl utility in sbin/drvctl build directory.
   
   20080503:
           The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
   
   20080521:
           For a while, unprivileged UPDATE builds would fail to
           succeed at the checkflist stage, complaining that
           ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
           problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
           If you already hit this problem, update the .mk file,
           remove ${DESTDIR}/stand/<arch>, and re-run the build.
   
   20080303:
           Linker warnings are now fatal if $WARNS>0.
   
   20080126:
           The posix_fadvise system call has been changed from an assembly
           stub, to a c file that calls an assembly stub. You need to
           'rm -f posix_fadvise.* .depend' in the libc build directory to
           avoid using the old assembly stub.
   
   20071209:
           The acpiec(4) driver has been split into two attachments. If you
           get ACPI errors before the attachment, please update your kernel
           configuration file appropriately or see GENERIC for more details.
   
   20071115:
           The it(4) driver has been renamed to itesio(4) and the old port
           argument specified in the kernel configuration file is not valid
           anymore. The itesio(4) driver now uses the Super I/O address port
           rather than the EC address port. Please update your kernel
           configuration file appropriately or see GENERIC for more details.
   
   20071028:
           The pccons(4) driver has been removed from the NetBSD/shark port.
           You need to update any custom kernel configuration file you have
           to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
           entries for the wscons driver.  See the GENERIC configuration file
           for more details.
   
   20070913:
           A latent bug in dhclient/dhcpd that caused it to be unable to
           enumerate interfaces was fixed.  The bug began to cause
           problems after 20070911 when the kernel's SIOCGIFCONF
           implementation was repaired.  From 20070529 to 20070911 racoon
           could not enumerate interfaces.  (These are noted because
           normal kernel/userspace version matching hygiene is not
           sufficient to avoid this problem.)  Ensure that both kernel
           and userland are from after 20070913.
   
   20070703:
           nbinstall has been renamed as it calls the target specific and
           the logic to pass down STRIP from mk been removed.  This forces
           a re-installation of tools.
   
   20070422:
           The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
           to userspace) namei() and lookup() directly check the emulation
           root. One side effect is that absolute symlinks inside the emulated
           root file system will be relative to that file system - unless they
           start /../ this is useful when the emulated root is a real install
           that has such links.
           This might affect symlinks that have been added to reference outside
           the emulated root.
   
   20070412:
           The pckbc driver on sgimips IP32 has been removed. Use macekbc
           instead. See the GENERIC32_IP3x kernel configuration for an
           example.
   
   20070319:
           src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
           updated and built after about 20070315, do "nbmake-$arch
           cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
           rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
           src/lib/libc/Makefile 1.130.
   
   20070210:
           src/sys/sys/{sa.h,savar.h} were removed.
             find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                 | xargs egrep -l '/sa.h|/savar.h' | xargs rm
           will allow dependencies on those files to get get rebuilt
   
   20070209:
           The threading model was changed when the newlock2 branch
           was merged to NetBSD-current.  If you boot with a new
           kernel (version 4.99.10), then you also need a new pthread
           library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
           (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
           the pthread library in sync, old threaded applications should
           continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
   
   20061214:
           Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
           will need to do a "make cleandir" in
                   tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
                   bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
           in order to excise stale references to the old stat_flags.h header
           file in the ls sources -- stat_flags.h has been removed.
   
   20061108:
           The configure script used in the src/tools/gcc compiler has been
           changed to indicate that our libc has ssp support built-in and
           does not depend on -lssp and -lssp-nonshared. You'll need to
           make clean in src/tools/gcc first to rebuild the compiler.
   
   20061009:
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
           available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
   
   20060814:
           The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
           withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
           few years should cope.
   
   20060703:
           MPACPI is no more. We always configure PCI interrupts using ACPI
           if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI. Thanks to work from fvdl.
   
   20060627:
           socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
   
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 25  Hints for a more successful build:
Line 222  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 33  Hints for a more successful build:
Line 232  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
   
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 82  for anyone who uses any make(1) features
Line 282  for anyone who uses any make(1) features
 #!/bin/sh  #!/bin/sh
 . /etc/mk.conf  . /etc/mk.conf
   
 if [ -z $BSDSRCDIR ] ; then  if [ -z $NETBSDSRCDIR ] ; then
     BSDSRCDIR=/usr/src      NETBSDSRCDIR=/usr/src
 fi  fi
 if [ \! -d $BSDSRCDIR ] ; then  if [ \! -d $NETBSDSRCDIR ] ; then
     echo Unable to find sources      echo Unable to find sources
     exit 1      exit 1
 fi  fi
 find $BSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;  find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
   
 if [ -z $BSDOBJDIR ] ; then  if [ -z $BSDOBJDIR ] ; then
     BSDOBJDIR=/usr/obj      BSDOBJDIR=/usr/obj
Line 98  if [ -d $BSDOBJDIR ] ; then
Line 298  if [ -d $BSDOBJDIR ] ; then
     rm -rf $BSDOBJDIR      rm -rf $BSDOBJDIR
 fi  fi
   
 cd $BSDSRCDIR && make cleandir  cd $NETBSDSRCDIR && make cleandir
   
 ---cut here---  ---cut here---
   
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         gnu/usr.bin/egcs          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.sbin/config          usr.bin/xlint
         crypto-*/usr.bin/compile_et          usr.bin/config
         crypto-*/usr.bin/make_cmds  
   
 Other problems and possibly solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
   Fix:    Rebuild usr.bin/make:
           cd usr.bin/make && make && make install
           Or, a failsafe method if that doesn't work:
           cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
   
 Fix:    Make sure .mk files are up to date.  Fix:    Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
 Fix:    Rebuild usr.bin/make  
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
   
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 133  Fix: Rebuild usr.bin/lex
Line 333  Fix: Rebuild usr.bin/lex
   
 Symptom:  Symptom:
 Fix:    rm /usr/lib/libbfd.a  Fix:    rm /usr/lib/libbfd.a
   
   Symptom:Obsolete intermediate files are used during compilation
   Fix:    Try the following sequence of commands in the directory in question.
           make cleandir; rm `make print-objdir`; make cleandir; make obj
           (If you built the tree without "make obj" in the past, obsolete files
           may remain.  The command tries to clean everything up)
   
   Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type
   Fix:    Rebuild and install usr.bin/menuc
   
   Symptom:mklocale not found during build in share/locale/ctype
   Fix:    Build and install usr.bin/mklocale
   
   Symptom:undefined reference to `__assert13' or `__unsetenv13'
   Fix:    Rebuild and install lib/libc
   
   Symptom:usr.bin/config fails to build.
   Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
   
   Symptom:undefined reference to `getprogname' or `setprogname'
   Fix:    Rebuild and install lib/libc
   
   Symptom:lint does not understand the '-X' option
   Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint

Legend:
Removed from v.1.2  
changed lines
  Added in v.1.180

CVSweb <webmaster@jp.NetBSD.org>