Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files. =================================================================== RCS file: /ftp/cvs/cvsroot/src/UPDATING,v rcsdiff: /ftp/cvs/cvsroot/src/UPDATING,v: warning: Unknown phrases like `commitid ...;' are present. retrieving revision 1.119 retrieving revision 1.141 diff -u -p -r1.119 -r1.141 --- src/UPDATING 2004/05/03 03:57:15 1.119 +++ src/UPDATING 2005/07/01 09:55:37 1.141 @@ -1,13 +1,127 @@ -$NetBSD: UPDATING,v 1.119 2004/05/03 03:57:15 atatat Exp $ +$NetBSD: UPDATING,v 1.141 2005/07/01 09:55:37 augustss Exp $ -This file is intended to be a brief introduction to the build -process and a reference on what to do if something doesn't work. +This file (UPDATING) is intended to be a brief reference to recent +changes that might cause problems in the build process, and a guide for +what to do if something doesn't work. -For a more detailed description see Makefile. +For a more detailed description of the recommended way to build NetBSD +using build.sh, see the BUILDING file. + +Note that much of the advice in this UPDATING file was written before +build.sh existed. Nevertheless, the advice here may be useful for +working around specific problems with build.sh. + +See also: BUILDING, build.sh, Makefile. Recent changes: ^^^^^^^^^^^^^^^ +20050531: + genassym.sh(8) was moved to genassym(1). You need to either build + tools first or install the version of genassym from /usr/bin before + you can build a kernel again. + +20050520: + Because a kernfs bug which xentools relies on was fixed, + xentools up to xentools20-2.0.3nb4 won't work with new kernel. + +20050417: + postinstall(8) was moved from /etc to /usr/sbin and made part + of the "base" set, to make it easier to invoke after an + upgrade. + +20050325: + pcppi(4) was separated in two devices, adding attimer(4). Be sure + to add a config line for an attimer(4) device in your kernel + configuration, or you won't be able to set the pitch of the beep + with wsconsctl. Depending on the default value for the pitch, you + might even not hear any more beep. Also, it is advised to attach both + devices the same way (i.e., both on isa or both on acpi) or the + pcppi(4) device may fail to find the attimer(4) one. + +20050211: + Fixes to tools/Makefile.gnuhost may cause UPDATE=1 builds in + some of the cross tools to fail if they use configure. Some configure's + cache the environment passed in and notice the new environment is + different and abort. Doing a clean in tools/ should be enough to + make a build continue. + +20050109: + Since su is using pam by default now, make sure that you have + /etc/pam.d populated (postinstall will do that automatically + for you). Otherwise su will fail open (i.e. will not require + a password). + +20041229: + Make had a path resolution bug that manifested itself as not + being able to install openpam.3. This bug has been fixed, but + you might need to rebuild make manually first to get through + the build. + +20041201: + Userland programs have been changed to use /dev/bpf instead of + /dev/bpfX. You need to create that device by installing a new + MAKEDEV and running it, or mv /dev/bpf0 /dev/bpf && rm /dev/bpf[0-9]* + +20041006: + + A bug was introduced into /bin/sh (var.c rev 1.35) which causes + variables to not export correctly to subshells in all cases. This + will cause builds to break if that version of /bin/sh is installed + on the system. The proper version of /bin/sh can be verified with: + + ident /bin/sh | grep var + + Any /bin/sh w. version 1.35 will not work and needs to be updated + before attempting a build. + +20041001: + The ipfilter kernel sources moved from sys/netinet to + dist/sys/ipf/netinet. Due to the move some Makefile + dependencies are now dangling requiring a make cleandir + before they work again (kdump, ktruss, rescue, ipf, and + ftp-proxy are the victims). + +20040715: + The rc.d/sendmail script now uses a heuristic to determine + if sendmail should be started at boot time. It checks the + contents of /etc/mailer.conf, /etc/mail/submit.cf, and the + owner and mode of the sendmail binary to see if any changes + to the mail infrastructure have been made. If no changes + are detected, it will start an SMTP listener. + + Setting sendmail=NO in /etc/rc.conf will override this. + + If you are only using sendmail by default and only for + local delivery, it is important that you also update your + sendmail.cf so that the SMTP listener only listens on the + loopback interface. + +20040715: + The method by which athhal-elf.o gets pulled into i386 + kernel builds has been changed again. The latest version + of bsd.files.mk is no longer required. + +20040621: + Due to the recent rototill of tools/compat it's crucial one starts + from a clean objdir under tools/*. + + This is mostly due to generated files (yacc and lex sources) needing + to be generated with new rules from bsd.hostprog.mk. + + The safest course is to rm -rf all objects under tools before building. + +20040516: + The end-user modifiable X11 configuration has been moved + from /usr/X11R6/lib/X11/ to /etc/X11/. + Ensure that src and xsrc is up to date, and run + "make cleandir" in src/x11 before your next build. + + postinstall currently doesn't migrate the files from + /usr/X11R6/lib/X11/* to /etc/X11/* although it does + detect that this needs to occur, so you'll have to + manually move these files yourself. + 20040426: Support for the original dynamic sysctl node structure has been removed in favor of the newer layout. This affects @@ -19,11 +133,20 @@ Recent changes: will not work on a kernel built from sources dated after 2004/04/25. If you need a new sysctl binary but build.sh does not work, make sure that your revision of - /usr/include/sys/sysctl.h is 1.112 (or later), and then - the following should provide a functioning sysctl binary: + src/sys/sys/sysctl.h is 1.112 (or later), and then the + do the following: - cd src/sbin/sysctl + cd /usr/src (or wherever your source tree is) + make USETOOLS=no includes + cd lib/libc make USETOOLS=no dependall install + cd ../../sbin/sysctl + make USETOOLS=no dependall install + + If you are using older sysctl binary, GNU autoconf would fail to + identify your machine architecture, and tries to build binary for + "unknown-unknown-netbsd20F" or something like that. if that happens, + make sure to follow the above steps. 20040425: The ffs superblock issues listed below under 20040109 and 20030402 @@ -38,7 +161,7 @@ Recent changes: possible. For more details on the fixsb script, see pr install/25138. 20040418: - Statfs(2) and friends have been replaced with statvfs(2). Before + statfs(2) and friends have been replaced with statvfs(2). Before installing a newly build userland make sure that you are running a newly built kernel with COMPAT_20 set. In addition your libc build might not work (undefined SYS_statfs symbol) because make @@ -572,6 +695,12 @@ Recent changes: Hints for a more successful build: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + Use build.sh, but do not use its "expert mode": + This will automatically build the tools in the + correct order, and it will keep the tools and the + new build products from interfering with the running + system. This will allow you to ignore most of the + other advice in this file. Build a new kernel first: This makes sure that any new system calls or features expected by the new userland will be present. This @@ -582,7 +711,9 @@ Hints for a more successful build: about one. It also makes it easier to clean up after a build. It's also necessary if you want to use the same source tree for multiple machines. - To use object directories: + To use object directories with build.sh: + a) invoke build.sh with the "-M" or "-O" options. + To use object directories without using build.sh: a) cd /usr/src ; make cleandir b) Add "OBJMACHINE=yes" to /etc/mk.conf c) Add "MKOBJDIRS=yes" to /etc/mk.conf @@ -590,20 +721,21 @@ Hints for a more successful build: Note that running "make obj" in a directory will create in obj.$MACHINE directory. Build to a DESTDIR: - This helps to keep old - installed files (especially libraries) from interfering - with the new build. - To build to a DESTDIR, set the DESTDIR environment - variable before running make build. It should be set to - the pathname of an initially empty directory. - Problems: you might need to update critical utilities - without using DESTDIR since nothing is executed - from what is installed in DESTDIR. - (See critical utils, below) + This helps to keep old installed files (especially libraries) + from interfering with the new build. + To build to a DESTDIR with build.sh, use the "-D" option. + To build to a DESTDIR without using build.sh, set the DESTDIR + environment variable before running make build. It should be + set to the pathname of an initially empty directory. + Problems: if you do not use build.sh, you might need to + update critical utilities without using DESTDIR since + nothing is executed from what is installed in DESTDIR. + (See critical utils, below.) Build often: This keeps critical utilities current enough to not choke on any other part of the source tree that depends on up to - date functionality. + date functionality. If you use build.sh, you should not have + this problem. What to do if things don't work: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^