[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version and 1.285

version, 2004/07/23 08:45:42 version 1.285, 2017/08/17 01:16:55
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
 For a more detailed description see Makefile.  For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
   Sections are marked with "^^^^^".  After the section on "Recent changes"
   are several sections containing more general information.
   See also: BUILDING, build.sh, Makefile.
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
 20040715:  20170816:
         The rc.d/sendmail script now uses a heuristic to determine          a new version of MPFR and MPC have been imported and probably
         if sendmail should be started at boot time.  It checks the          will break parts of builds related to themselves or GCC, both
         contents of /etc/mailer.conf, /etc/mail/submit.cf, and the          in the tools and the native section.  Remove all GCC, GMP, MPFR
         owner and mode of the sendmail binary to see if any changes          and MPC objdirs or build once without -u.
         to the mail infrastructure have been made.  If no changes  
         are detected, it will start an SMTP listener.  20170402:
           a new version of dhcpcd has been imported, which does not support
         Setting sendmail=NO in /etc/rc.conf will override this.          update builds from the previous version. Remove your
           external/bsd/dhcpcd object dir or build once without -u.
         If you are only using sendmail by default and only for  
         local delivery, it is important that you also update your  20170211:
         sendmail.cf so that the SMTP listener only listens on the          a new terminfo database has been imported.
         loopback interface.          The structure of it has changed slightly from prior versions and
           an updated tic tool is required.
 20040715:          If you build.sh, don't use -u
         The method by which athhal-elf.o gets pulled into i386  
         kernel builds has been changed again.  The latest version  20170207:
         of bsd.files.mk is no longer required.          various arch dependent libc/exect.S files were removed
           Either remove the obj directories (lib/libc and compat/amd64/i386/lib
 20040326:          if it exists) or do a clean build.
           (This is a bug in the make system, it should be corrected without
         The method by which athhal-elf.o gets pulled into i386 kernel builds          human intervention, but isn't.)
         has been changed. The file is now stored as a uuencode file in CVS  
         and the generated Makefile will use the new .uue rules from bsd.file.mk  20170104:
         to build it.          xinput build options have changed.
           Remove the obj directory (external/mit/xorg/bin/xinput)
         This means you must have the latest bsd.files.mk installed when          if you build.sh -u
         building a kernel without USETOOLS=yes.  
 20040318:          a new version of flex has been imported.
         A bug in the cgd(4) blowfish code was corrected, without          Remove the file from obj (external/bsd/flex)
         provision of backwards compatibility, after several public          if you build.sh -u
         notices over several months. Users of cgd with blowfish cipher  
         ONLY must dump their data before updating their kernels, and  20161014:
         recreate cgd's and restore data using the new kernel. See          a new version of OpenSSL has been imported.
         (recent message to current-users, URL when mail-index has updated)          Remove the files from obj (crypto/external/bsd/openssl)
           if you build.sh -u
         On acorn32, the opms and qms drivers have been withdrawn, and  20161009:
         the old wsqms driver is now called qms.  Kernel config files          a new version of dhcpcd has been imported with slightly changed
         will need updating.  See the ones in sys/arch/acorn32/conf          build infrastructure. When doing a build.sh -u this requires
         for examples.          pruning the external/bsd/dhcpcd objdir.
 20040125:  20160914:
         On acorn32, the beep and sysbeep devices are no longer          i386, amd64, shark, ofppc and macppc have joined shark and x68k
         needed, and will need to be deleted from kernel configuration          ports in using xorg-server 1.18. This requires a clean destdir
         files.          and a clean objdir.
 20040109:  20160527:
         Compatibility for old ffs superblock layouts has been          i386 needs a full cleandir or objdir deletion because PIE has
         added, and the restrictive fsck checks have been reenabled          been enabled. (see the amd64 entry two down for further info)
         when using those layouts.  If you have been using -current  
         since 20030402, you may find that fsck again signals fatal  20160418:
         superblock mismatches.  To repair, make sure you have          libedit needs manual removal of all autogenerated files since
         an updated fsck_ffs and then you can use fsck_ffs -b 16 -c 4          some of them are not autogenerated anymore. Remember that there
         to complete the filesystem upgrade.  A message has          might be two copies of libedit if your platform builds "compat".
         been added to the kernel which should detect this problem.  
         See the following discussion for more information:  20160410:
         http://mail-index.NetBSD.org/current-users/2004/01/11/0022.html          amd64 needs full "make cleandir" or deletion of objdir now that
           PIE has been enabled for amd64.  PIE, or position-independent
 20031203:          executables, means all code, including executables and not just
         New binutils builds may fail due to old dependencies.          shared libraries, is position-independent and hence able to be
         It's necessary to "make cleandir" to ensure that          relocated by ASLR, address space layout randomization.
         the dependencies will be rebuilt correctly.  
           The change was made in Makefile variables for compiler and
 20031111:          linker flags, for which make(1) does not record dependencies,
         A newer mkdep is needed.  Error noting that is          hence it is unable to detect that all .o files need rebuilding.
                 cc: Ambiguous abbreviation --  
           Partial rebuilds with some modified source files will likely
 20031008:          fail when linking executables, since the linker refuses to mix
         /usr/include/sys/disklabel_mbr.h was removed.          position-independent code with position-dependent code in
         It's necessary to "make cleandir" to ensure that          position-independent executables:
         the dependencies will be rebuilt correctly.  
                   .../x86_64--netbsd/bin/ld: foo.o: relocation R_X86_64_32 against `...' cannot be used when making a shared object; recompile with -fPIC
         A sign exension bug was fixed which set all the high bits  20160401:
         of our newly expanded ffs fs_flags.  This should only          Ports switching to GCC 5.3 will need a full "make cleandir".
         affect users who installed or upgraded in September of 2003.          Some people have found that cleandir is not sufficient, so if
         A small utility program was posted to tech-kern which          in doubt delete the entire object directory tree for gcc.
         should fix this problem, and a warning message was added  
         to the kernel which should discover and warn about it.  See  20160306:
         http://mail-index.NetBSD.org/tech-kern/2003/10/07/0005.html          NetBSD's regexp implementation is now part of libnbcompat.
           Nblex, nbm4, nbpax, nbsed use it and they may crash on
 20030906:          non-NetBSD hosts if linked with stale object files produced
         With the addition of siginfo support the old signal trampoline          while they included a non-NetBSD regex.h.
         code has been deprecated to COMPAT_16. Make sure that your running          In any case, you should "make cleandir" at least these tools
         kernel has COMPAT_16 enabled before building userland.          before updating your toolchain.
 20030801:  20160125:
         With the new openssl, there is some header and library shuffling.          Dtrace has been enabled by default on some architectures.
         rm -f /usr/include/des.h /usr/include/kerberosIV/* /lib/libdes* \          When doing an update build, make sure to clean the etc/mtree
         /usr/lib/libdes* before building.          object directory before starting the build - otherwise the
           needed directories in destdir will not be created.
 20030703:          An easy way to do this is:
         Texinfo was updated to 4.6.  To avoid failures when trying to             cd src/etc/mtree && $TOOLDIR/bin/nbmake-$arch cleandir
         build the included texinfo files, do:  
         cd src/gnu/usr.bin/texinfo          New acpica requires "make cleandir" in src/external/bsd/acpica
         make MKINFO=no dependall install          again.
 20030630:  20150413:
         Groff was updated to 1.19; it's probably necessary to do          New acpica requires "make cleandir" and reinstalling yacc
                 cd share/mk && make install          in /usr/src/external/bsd/byacc and /usr/src/tools/yacc and
                 cd src/gnu/usr.bin/groff          also "make cleandir" in /usr/src/external/bsd/acpica.
                 make MKMAN=no dependall install  
         (untested).  20150404:
           Lint changes require a full rebuild of the tool, so make
 20030516:          sure to build without -u option to build.sh, or manually
         Due to bugs in the export handling code, invalid export lines          do a make cleandir in src/tools/lint1 and
         were accepted before and caused the kernel to panic when          src/usr.bin/xlint.
         mountd got restarted because it freed memory that had already  
         been freed. This has been fixed and the kernel checks  20150310:
         export addresses very strictly. If you upgrade your kernel,          Improvements to openssl for arm mean that update builds of
         make sure you also upgrade mountd, because if your export          the openssl libraries will fail. A make cleandir in
         file contains lines with an old inet4 address syntax (i.e.          external/bsd/openssl/lib is needed
         a.b.c or a.b or a), they will get rejected by the new kernel.  
 20030402:          A mishap during the import of pppd may cause your corruption
         The superblock layout for FFS was changed.  If you have 1.6          in your cvs directory if you happened to do a cvs update
         fsck binaries, they will signal a fatal superblock mismatch          during a short period of time. To fix, just remove the
         with the first alternate, because they compare too many          directory src/external/bsd/ppp/dist/pppd completely
         fields (even ones that aren't useful).  If possible, upgrade          and let cvs restore it on next update.
         your fsck_ffs binary before using a new kernel.  
         None of this signals actual filesystem damage.  20140721:
           The src/external/mit/lua/src directory was accidentally created
 20030324:          and then deleted in the CVS repository.  If you get errors like
         sendmail version 8.12.8 was imported.  Since sendmail is  
         now setgid to the smmsp group, and runs in "collection"          cvs [update aborted]: cannot open directory
         mode for most common activities, there is a new config          /cvsroot/src/external/mit/lua/src: No such file or directory
         file called submit.cf that needs to live in /etc/mail.  
         The generic submit.cf sample in /usr/share/sendmail/cf          then delete your local copy of that directory tree and try again.
         is named netbsd-msp.cf.  Upgrading your regular sendmail  
         configuration file is also strongly advised.  20140530:
           ARM eABI switched to DWARF based exception handling. This requires
         See the section named "MESSAGE SUBMISSION PROGRAM" in          rebuilding all C++ code. It is strongly advised to do a clean build.
         the updated /usr/share/sendmail/README file for more  
         information.  20140131:
           The new compiler_rt/libc integration moved a few things. It is strongly
 20030117:          advised to do a clean build. At least lib/libc, the compat version(s)
         Texinfo was updated to 4.3.  To avoid failures when trying to          of libc, libkern, rump and the kernels need to be cleaned.
         build the included texinfo files, do:  
         cd src/gnu/usr.bin/texinfo          1. The new ntpd runs in a restricted mode to prevent amplification
         make MKINFO=no dependall install             attacks. If you need ntpdc to work you need to explicitly enable
              mode7 in your config file. Make sure you put the necessary restrict
 20021223:             statements to avoid being exposed.
         The METALOG format changed slightly, to remove the leading          2. strncat has moved from lib/libc to common/lib/libc; you might need
         "${DESTDIR}" from path names.             to make clean in libc
         This only affects people building with UNPRIVED.  
         For complete safety, remove the DESTDIR entirely and  20131129:
         update tools/mtree, before running make build.          The GMP sources were updated, and builds will likely fail without
           cleaning their build trees for both tools and in-tree, like below.
         CVS repository layout was changed.  See the following for details  20131128:
         if you are using (anonymous) cvs to update your tree.          The MPC and MPFR sources were updated, and builds may require their
           tools and in-tree directories cleaned for successful updates.
 20021219:          The kernel option FAST_IPSEC no longer exists, it's been renamed
         install(1) had a '-N dbdir' option added, to specify an          to IPSEC (and the older IPSEC version removed).
         alternate location to look up users & groups (instead  
         of the host system passwd(5) and group(5) databases).  20130605:
           Previous freetype installations eroneously installed private
         The build system was modified to take advantage of          header files. If you are building against a non-empty $DESTDIR,
         this option (using ${NETBSDSRCDIR}/etc), so if you          please remove ${DESTDIR}//usr/X11R7/include/freetype2/freetype/.
         use USETOOLS==no, you may have to rebuild and  
         reinstall usr.bin/xinstall first.  20130531:
           The xdm update may cause build failure due to xdm.man being
 20021130:          in the obj tree.  Make sure to ensure any like this:
         fparseln(3) moved from libutil to libc.                  nbmake: nbmake: don't know how to make xdm.man. Stop
         If building to DESTDIR=/, reinstall the includes          is fixed by deleting the xdm.man in the obj tree.
         and rebuild libc:  
                 make includes  20130530:
                 make do-lib-libc          Updates of many xsrc packages will leave old .pc files around.
         If using build.sh, "cd tools/compat && make clean"          Best to clean out the xsrc objdir entirely before rebuilds.
         before rebuilding the tools.  
 20021126:          The removal of netiso requires manual removal of /usr/include/netiso
         The mk.conf(5) variable SYS_INCLUDE has been deprecated,          prior to the build and make cleandir in /usr/src/usr.bin/{ktruss,kdump}
         including the optional "SYS_INCLUDE=symlinks" support.  
         All header files, including <sys/*.h> are copied into  20120726:
         /usr/include.          The update of OpenSSL requires cleaning both the OpenSSL build
           directory and DESTDIR.  *Even non-update builds require cleaning
 20021121:          DESTDIR.* Builds done without taking these steps may fail, or in
         The C run-time support files crtbegin.o and crtend.o          some cases may succeed and install broken OpenSSL libraries that
         (and their companions crtbeginS.o and crtendS.o) were          cause third-party software to link incorrectly and/or crash.
         split up, with new crti.o and crtn.o files resulting.  
         This means that libtool needs to be rebuilt once the  20120507:
         new libraries are installed.  The process of rebuilding          The database schema for makemandb was changed.  You will
         libtool will cause it to automatically notice the new          need to update the database using 'makemandb -f' or wait
         required files, but it *must* be rebuilt in order to          for the next weekly run to fix it.
         do this.  
         An out-of-date libtool will result in shared libraries          sys/conf/Makefile.kern.inc has been modified to adjust the
         which lack _init() and _fini() routines, which means that          size of db_symtab automatically.  You need to update dbsym in
         their global contructors/destructors will not be invoked.          your $TOOLDIR to build kernels with options SYMTAB_SPACE.  If
           you don't want this behavior, add AUTO_SYMTAB_SPACE=no to your
 20021121:          mk.conf.
         A bug related to how ARM ELF objects were tagged has been  
         corrected.  20120216:
           Default for MKCATPAGES changed to NO.  Update builds will fail
         NetBSD ARM ELF uses the soft-VFP floating point model by          unless DESTDIR is cleaned manually.  If you built between 20120207
         default.  However, the assembler lacked support for marking          and 20120216, daily and weekly could have created an unreadable
         objects as using the VFP floating point format, and the          /var/db/man.db index for apropos.  Running makemandb -f or
         compiler was not properly passing the flag indicating "soft-VFP"          the next run of weekly will fix it.
         to the assembler.  
         Unfortunately, this means that the linker will now consider          If you built between 20111225 and 20111227 you need to remove
         old (i.e. not marked "softvfp") NetBSD ARM ELF objects to be          /usr/lib/libpam.so.4* and /usr/lib/security/*.so.4, since the
         incompatible with new (properly marked) objects.          bump has been reverted.
         The problem will only manifest itself if you attempt to compile  20111125:
         a new program using the fixed toolchain, and link that program          The "rnd" pseudodevice has been added to sys/conf/std, which
         against old libraries which do not have the proper "softvfp"          means it should no longer be explicitly listed in kernel
         markings.  ALL OF YOUR EXISTING BINARIES AND SHARED LIBRARIES          configuration files.  The line "pseudo-device rnd" should be
         WILL CONTINUE TO WORK PROPERLY.          removed from any custom kernel config files users may have.
         The only work-around for the problem is to recompile all of  20111119:
         the libraries on the system.  The easiest way to do this for          A problem with the datastructures used by the rndctl(8)
         system libraries is to install a binary snapshot; they are          utility (pointers in datastructures in an array, making 32->64
         generally available on releng.NetBSD.org.  Any packages you          bit compatibility very painful) has been fixed in a
         have installed which supply libraries will have to be recompiled          non-backwards-compatible way.  If you replace your kernel,
         if you wish to link new programs against those libraries.          replace your rndctl executable too.
         If you have questions about this matter, please contact  20111001:
         port-arm@NetBSD.org.          the prop_*_send_syscall() functions from proplib(3) have been
           changed and their new version is not backward compatible with the old
 20021011:          one.  So ensure that all consumers of these functions (currently:
         Systrace has been improved to support privilege elevation.          quota2 code and its tests) are updated together with the new lib.
         Updating the kernel requires the userland part of systrace  
         to be rebuilt.  20110817:
           sparc has been changed to use GCC 4.5.3, so any objdir or
 20021010:          DESTDIR for them should be deleted before updating.
         The config(8) grammar was changed to allow options to register  
         dependencies on attributes, as well as other options.  Users  20110806:
         must update and reinstall usr.sbin/config before building a new          i386 and amd64 have been changed to use GCC 4.5.3, so any
         kernel.          objdir or DESTDIR for them should be deleted before updating.
 20021009:  20110805:
         A new attribute dependency syntax was introduced to config(8),          The update to GCC 4.5.3 requires a non-trivial portion of
         which is now used by the SCSI configuration description.  Users          the tree to be cleaned.  Best to delete both objdir and
         must update and reinstall usr.sbin/config before building a new          DESTDIR before running this update.  So far, only the
         kernel.          sparc64, mips and powerpc platforms have changed.
 20021003:  20110803:
         Several changes have been made to the autoconfiguration          The layout of external/public-domain/xz has changed.  To do an
         framework.  Users must update and reinstall usr.sbin/config          update build you will have to remove the contents of the OBJDIR
         before building a new kernel.          for external/public-domain/xz/bin by hand as the xz entry there
           is now a directory.
         The i386mp branch has been merged.  To compile a kernel, users  20110410:
         will need to add the option 'cpu* at mainbus?' to their configuration          The configuration of src/tools/gcc has changed.  To do an
         file.  Multiprocessor kernels will need          update build you have to clean both tools/binutils and
         ioapic*         at mainbus? apid ?          tools/gcc by hand.
         options         MULTIPROCESSOR  
         options         COM_MPLOCK  20110328:
           Building the Xorg binary was moved into a subdirectory to fix
 20020922:          ordering issues with "make all".  It may be necessary to remove
         MKDYNAMICROOT=yes enabled by default, which means that          the OBJDIR for external/mit/xorg/server/xorg-server/hw/xfree86
         certain shared libraries are installed into /lib, the shared          if your update build fails, as the "Xorg" entry there is now a
         linker is installed into /libexec, and all programs in /bin  
         and /sbin are dynamically linked.  
         If you do not use "make build", you should ensure that  
         you have the libraries and shared linker in the new locations,  
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  
         USE_NEW_TOOLCHAIN has been replaced with:  
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which  
                 there is no working in-tree toolchain (hppa, ns32k, sh5,  
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the  
                 root of an external toolchain (e.g. /usr/local/gnu).  This  
                 enables the cross-build framework even for TOOLCHAIN_MISSING  
         gehenna-devsw has been merged into the trunk. Need to update and  
         reinstall usr.sbin/config before building the kernel.  
         Crunched rescue tools (contents of /bin and /sbin, plus others)  
         are now provided in /rescue.  
         To ensure that these are built statically linked (no matter  
         what the setting of LDSTATIC is), use a crunchgen(1) built  
         from sources newer than 20020820 (see the next entry).  
         crunchgen(1) changed to ensure that the generated program  
         is statically linked.  
         Solution: update and reinstall usr.bin/crunch  
         smmsp user/group has been added for sendmail.  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         smmsp:*:17:17::0:0:Sendmail Message Submission Program:/nonexistent:/sbin/nologin  
         sshd user/group has been added.  Need to hand add this in, or sshd  
         will not let you log in (with default, or UsePrivlegeSeparation=yes)  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin  
         Also /var/chroot/sshd directory needs to be present (digged as part of  
         the build process).  
         NBUILDJOBS obsoleted in favor of just using -j.  
         etc/postinstall added, which performs various checks for  
         configuration file updates and changes, and can fix most of  
         the problems identified.  
         This should make it much easier to upgrade a system's  
         configuration from earlier systems (as far back as NetBSD 1.5).  
         <bsd.lib.mk> needs a new install(1) for its "-a cmd" support.  
         Build and install at usr.bin/xinstall before the build.  
         Raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  Be sure to have sbin/rtsol and usr.sbin/rtsold  
         newer than November 2001 when you upgrade the kernel.  
         ssh configuration files were moved from /etc to /etc/ssh.  Beware  
         if you restart your machine from remote.  Note that sshd.conf needs  
         to be changed (due to the use of "/etc" inside).  
         Users of the VAX port will need to rebuild and install gas  
         so it deal with the now present register prefix used in all  
         the VAX assembly files.  
         ntpd user/group has been added.  Need to hand add this in or builds  
         will break as mtree aborts early.  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin  
         If you're attempting to build a snapshot on sparc64 and are getting  
         reloc errors from the toolchain groff binary this means your native  
         toolchain has some broken C++ bits.  
         To fix:  
         Build a new toolchain (i.e. build.sh -t)  
         Use the new toolchain to build and install natively (i.e. /usr/lib)  
         After this a snapshot will be able to be built.  
         In order for a sparc64 build to work you must have a working awk. If  
         you've built and installed a system with the new toolchain up to this  
         point you do not have a working awk as its ability to do floating  
         point is broken.  
         To build:  
         remake and install gnu/lib/libgcc  
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  
         against the new libgcc.a)  
         Kernel config information was changed to use defflag in  
         the various "files" files.  Bug fixes to config(8) are  
         required in order for this to work properly.  Make sure  
         to build and install in usr.sbin/config before attempting  
         to build a new kernel.  
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)  
         before building libc.  
         The new document BUILDING.mdoc (view with nroff | more, or  
         see pre-generated .txt and .html versions) describes the build  
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN  
         build process, are intended in the long run to replace this  
         manual update log.  
         Users building a USE_NEW_TOOLCHAIN system should read the  
         BUILDING document for caveats.  Generally, BUILDING supersedes  
         UPDATING for these systems, as tool updating is taken care of  
         by the new build system.  
         src/etc/Makefile now needs install to be able to handle  
         symlinks that point to nowhere. A bug in install that  
         prevented this was corrected.  
         Solution: update and reinstall usr.bin/xinstall  
         Better Solution: Use the new toolchain and it will just work  
         for you.  
         /etc/mtree/NetBSD.dist has been updated to take advantage of  
         absolute path support added to mtree(8). Older mtree(8)s don't  
         understand the format.  
         Solution: update and reinstall usr.sbin/mtree  
         Crunchgen has been updated to work via reach-over makefiles. Updating  
         is suggested before running a snapshot build  
         The new "ubcperf" code committed by Chuck Silvers removed  
         a header file, uvm/uvm_vnode.h.  There may be stale .depend  
         files that still reference this file.  
         Solution: "make cleandir && make dependall" in affected  
         grep.info is now built from grep.texi using makeinfo.  Since it  
         requires makeinfo v4.0, you need to install new texinfo before  
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  
         (i386 only): i386 kernel now uses new instructions like  
         `fxsave' which old gas doesn't understand.  To build the  
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  
         from your kernel configuration until you rebuild your userland.  
         See 20011029 above and BUILDING file in this directory for more information.  
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]  
         Bootloader update on ELF platforms.  DDB in kernels from before  
         this will be unable to read symbol tables provided by newer  
         Texinfo was updated to 4.0.  To avoid failures when trying to  
         build the included texinfo files, do:  
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
         To work around add by hand:  
         to /etc/group and add:  
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
         to master.passwd (use vipw for instance if doing by hand).  
         Now a make build should progress.  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         directory.          directory.
 20000929:  20110121:
         The following make directives are obsoleted.          Assembler files no longer use -traditional-cpp.  This can break
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA          the build of individual parts of the tree.  This is handled
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be          correctly by build.sh.  Manual builds have to update /usr/share/mk
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build          and re-run config(1) for any kernel configurations as needed.
         additional library libcrypto_{idea,rc5}.  
           The tcpdump(8) program was changed to drop privileges and chroot(2)
           by default.  It may be necessary to manually update passwd(5) and
           group(5) in order to make the program work with existing setups.
           The latest changes to setenv(3) dissallow setting environment
           variables with names that contain '='.  Revision 1.18 of env.c
           assumed that this was allowed.  Installing a new libc with an
           old copy of /usr/bin/env causes env x=1 printenv | grep x= to
           break which affects the autoconf tests for dependency finding,
           so building gcc will end up printing:
               checking dependency style of gcc... none
               configure: error: no usable dependency style found
           Fix it by rebuilding and re-installing env.
           Recent Xorg updates in xsrc/external/mit/ may cause various build
           or run-time problems.  Delete your entire DESTDIR and OBJDIR if you
           have any build problems with xsrc, or problems with mismatched
           versions between xorg-server and drivers.
           The update of ATF to 0.9 causes old tests written in shell to fail
           unless they are rebuilt.  If you are building with MKUPDATE=yes,
           you need to clean the src/external/bsd/atf/tests/ and the src/tests/
           trees by hand.
           Recent Xorg updates in xsrc/external/mit/ will cause various build
           problems.  Delete your entire DESTDIR and OBJDIR if you have any
           build problems with xsrc.
           private section of <ctype.h> was splitted, and now mklocale(1)
           include ctype_local.h, so you have to make cleandir in tools/mklocale.
           The location of the xkb compiled descriptions has changed.  Please
           remove usr/X11R7/lib/X11/xkb/compiled from your $DESTDIR.
           The shared objects file extension has been changed from .so to
           .pico, in order to avoid conflicts with shared libraries names
           libXX.so.  All now stale regular .so files can be removed from
           your object directories.
           The termcap database has been removed from the sources,
           but has not been marked obsolete so it is not removed
           from the system when upgrading.
           As such, you will need to remove them from your object
           and destination directories.
           After updating, it may be necessary to make the 'cleandir'
           target in src/tools/yacc/ and in src/usr.bin/yacc/ before a
           'build.sh -u tools' or 'build.sh -u distribution'.  Ditto
           src/tools/lex/ and src/usr.bin/lex/.
           On amd64 you must rebuild tools (to get the new binutils)
           before building a kernel, or the build fails on cpufunc.S.
           An error will create a ./usr/X11R7/lib/X11/xkb/compiled/xkb
           symlink, failing the build.  Delete the link, and the subdir
           it is in, and retry your build.
           libc build changed so that strchr() provides the extra entry
           point for index().  Update build of libc.a (and libc_pic.a)
           may fail because the archive contains the unwanted index.o.
           (Similarly for strrchr() and rindex().)
           Native Xorg was upgraded again.  Builds will probably fail again
           without a clean objdir, at least for src/external/mit/xorg.
           Native Xorg was upgraded.  Builds will need a clean objdir for
           src/external/mit/xorg.  Upgrading a system from sets will not
           work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
           subdirectory has been changed into a file, and this needs to
           be manually "rm -r"'ed before installing xbase.tgz.
           Several new functions were added to string.h/libc, and this
           can cause autoconf problems during the tool build for people
           who fail to clean out their tools objects properly.  If you
           note messages about stpcpy, stpncpy or strnlen accompanying a
           failure during the tool build, clean out all your tools
           objects and start again.
           The i386 port was switched to i486 default toolchain.  This requires
           cleaning your src/tools directory and $TOOLDIR and rebuilding them.
           The __posix_fadvise50 system call changed assembly stub type.  You
           need to 'rm -f __posix_fadvise50.*' in the libc build directory
           to avoid using the old assembly stub.
           pkg_install now depends on the pkgdb cache for automatic conflict
           detection.  It is recommented to rebuild the cache with
           ``pkg_admin rebuild''.
           time_t and dev_t have been bumped to 64 bit quantities.  To upgrade:
           1. Make sure your kernel has COMPAT_50 in it.  Build and install.
              This is needed even in the MODULAR kernel because there is
              conditionally compiled code in rtsock.c.
           2. make sure build.sh completes and the binaries in a chroot work
              before installing.
           3. If you don't use build.sh and you build directly to root, and
              your build breaks in the middle, don't despair.  Make sure headers
              are installed properly, and start building libraries first libc
              and libutil, install them and then continue building all the
              libraries in src/lib and src/gnu/lib and install them.  Once
              the new libraries are installed, you can restart the build.
           4. If you compile packages and you notice link time warnings,
              rebuild the required packages to update their shared libraries.
              Any package you rebuild will require rebuilding all the packages
              that depend on it.
           5. Next time you run pwd_mkdb with the new binary, the file
              will be upgraded and it will not be backwards compatible.
           6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
              lastlogx(5)) have been versioned, and there is a heuristic
              for utmp.  You are better off removing the old files after
              upgrading.  The automated clearing of /var/run during
              boot, and the automated rotating of files in /var/log by
              newsyslog(8), may mean that you do not have to remove the
              files manually.
           7. The optional accounting file (/var/account/acct, see
              accton(8)) has not been versioned, and will need to be
              removed.  The automatic rotation of the accounting file by
              /etc/daily limits the bad consequences of failure to remove
              the file.
           8. Application software that writes time_t to binary files on
              disk will break or need attention.  Most notably: if you are
              using PostgreSQL < 8.4, you need to dump your databases,
              rebuild PostgreSQL with the new time_t, then restore.
           config(1) has been updated, and one of the files it creates -
           swapnetbsd.o - has changed format.  You need to rebuild config
           (done automatically by build.sh) and then you need to rerun
           config on all kernel configuration files before rebuilding those
           If you build with MKX11=no, you should remove /etc/rc.d/xdm and
           /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
           set and will appear as extra files for MKX11=no update builds.
           On i386, various kernel options(4) in GENERIC including
           file systems have been disabled and moved into kernel modules.
           Before trying a new GENERIC kernel, you have to prepare the
           following files as well as a new GENERIC kernel:
           - build and install kernel modules from src/sys/modules
           - install the latest bootloader, which will load a module
             for the file system from which the kernel is loaded automatically
           If you have to load your kernel from a file system which is not of
           the same type as the root file system, you have to load the necessary
           file system module manually on the boot prompt or in the boot.cfg file.
           If you built and installed a libc from sources between
           2008/08/20 and 2008/08/26 you got a broken strtouq(3)
           which results in false errors reported by lint(1).
           Since this breaks the libc build itself, manual help is
           needed -- lint must be disabled temporarily, e.g.:
             $ (cd lib/libc && make MKLINT=no dependall install)
           MKDEBUG build was broken because the .depend files did not know
           about .go files.  You need to remove all .depend files and rebuild.
           A regression in binary compatibility for pthread_mutex_t has
           been fixed.  Unfortunately, the price is breaking compatibility
           for -current.
           Threaded programs (using libpthread) and C++ programs (using
           libstdc++) compiled after 20070907 and before 20080802 need to
           be recompiled.
           One way to find affected pkgsrc packages:
             $ grep REQUIRES=/usr/lib/libpthread /var/db/pkg/*/+BUILD_INFO
             $ grep REQUIRES=/usr/lib/libstdc++ /var/db/pkg/*/+BUILD_INFO
           WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
           and userland (fsck_ffs in particular).  Please make sure you
           don't use a journaled filesystem with an older kernel/userland,
           especially an uncleanly mounted journaled filesystem.  WAPBL
           also requires the super block to be in the UFS2 format.  You
           can use fsck_ffs -c 4 to update the superblock format.
           Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
           isn't defined.
           The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
           from 125 (conflicted with DRVCTLCOMMAND) to 129.  The drvctl(8)
           utility needs to be rebuilt and reinstalled as older binaries
           won't work correctly.  The following sequence of commands:
             $ (cd sys/sys/ && nbmake-$arch includes)
             $ (cd sbin/drvctl/ && nbmake-$arch clean)
             $ (cd sbin/drvctl/ && nbmake-$arch all)
           leaves new drvctl utility in sbin/drvctl build directory.
           The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
           For a while, unprivileged UPDATE builds would fail to
           succeed at the checkflist stage, complaining that
           ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
           problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
           If you already hit this problem, update the .mk file,
           remove ${DESTDIR}/stand/<arch>, and re-run the build.
           Linker warnings are now fatal if $WARNS>0.
           The posix_fadvise system call has been changed from an assembly
           stub, to a c file that calls an assembly stub.  You need to
           'rm -f posix_fadvise.* .depend' in the libc build directory to
           avoid using the old assembly stub.
           The acpiec(4) driver has been split into two attachments.  If you
           get ACPI errors before the attachment, please update your kernel
           configuration file appropriately or see GENERIC for more details.
           The it(4) driver has been renamed to itesio(4) and the old port
           argument specified in the kernel configuration file is not valid
           anymore.  The itesio(4) driver now uses the Super I/O address port
           rather than the EC address port.  Please update your kernel
           configuration file appropriately or see GENERIC for more details.
           The pccons(4) driver has been removed from the NetBSD/shark port.
           You need to update any custom kernel configuration file you have
           to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
           entries for the wscons driver.  See the GENERIC configuration file
           for more details.
           A latent bug in dhclient/dhcpd that caused it to be unable to
           enumerate interfaces was fixed.  The bug began to cause
           problems after 20070911 when the kernel's SIOCGIFCONF
           implementation was repaired.  From 20070529 to 20070911 racoon
           could not enumerate interfaces.  (These are noted because
           normal kernel/userspace version matching hygiene is not
           sufficient to avoid this problem.)  Ensure that both kernel
           and userland are from after 20070913.
           nbinstall has been renamed ${MACHINE_GNU_ARCH}-install.  It
           calls the target-specific strip program, and the logic to pass
           down STRIP from make has been removed.  This requires a
           re-installation of tools.
           The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
           to userspace) namei() and lookup() directly check the emulation
           root.  One side effect is that absolute symlinks inside the emulated
           root file system will be relative to that file system - unless they
           start /../ this is useful when the emulated root is a real install
           that has such links.
           This might affect symlinks that have been added to reference outside
           the emulated root.
           The pckbc driver on sgimips IP32 has been removed.  Use macekbc
           instead.  See the GENERIC32_IP3x kernel configuration for an
           src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
           on many platforms due to incorrect flags settings.  If you
           updated and built after about 20070315, do "nbmake-$arch
           cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
           rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
           src/lib/libc/Makefile 1.130.
           src/sys/sys/{sa.h,savar.h} were removed.
             find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                 | xargs egrep -l '/sa.h|/savar.h' | xargs rm
           will allow dependencies on those files to get get rebuilt
           The threading model was changed when the newlock2 branch
           was merged to NetBSD-current.  If you boot with a new
           kernel (version 4.99.10), then you also need a new pthread
           library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
           (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
           the pthread library in sync, old threaded applications should
           continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
           Following the move of string_to_flags() and flags_to_string()
           from the bin/ls/ sources to libutil, users doing UPDATE builds
           will need to do a "make cleandir" in
                   tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
                   bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
                   usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                   as the installation images in distrib/
           in order to excise stale references to the old stat_flags.h header
           file in the ls sources -- stat_flags.h has been removed.
           The configure script used in the src/tools/gcc compiler has been
           changed to indicate that our libc has ssp support built-in and
           does not depend on -lssp and -lssp-nonshared.  You'll need to
           make clean in src/tools/gcc first to rebuild the compiler.
           The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
           available.  Use net.inet{,6}.tcp{,6}.congctl.selected instead.
           The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
           withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
           few years should cope.
           MPACPI is no more.  We always configure PCI interrupts using ACPI
           if we have an ACPI kernel.  The option MPACPI_SCANPCI has been renamed
           to ACPI_SCANPCI.  Thanks to work from fvdl.
           socket(2) has changed, and its system call has been versioned.
           For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
           errors will result.
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 565  Hints for a more successful build:
Line 664  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 573  Hints for a more successful build:
Line 674  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 When things don't work there is usually a few things that commonly  When things don't work there are usually a few things that commonly
 should be done.  should be done.
     1)  make includes      1)  make includes
         This should be done automatically by make build.          This should be done automatically by make build.
Line 644  cd $NETBSDSRCDIR && make cleandir
Line 746  cd $NETBSDSRCDIR && make cleandir
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
Line 667  Fix: Make sure .mk files are up to date.
Line 765  Fix: Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 684  Fix: Try the following sequence of comma
Line 782  Fix: Try the following sequence of comma
         (If you built the tree without "make obj" in the past, obsolete files          (If you built the tree without "make obj" in the past, obsolete files
         may remain.  The command tries to clean everything up)          may remain.  The command tries to clean everything up)
 Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type  Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible
           pointer type
 Fix:    Rebuild and install usr.bin/menuc  Fix:    Rebuild and install usr.bin/menuc
 Symptom:mklocale not found during build in share/locale/ctype  Symptom:mklocale not found during build in share/locale/ctype
Line 693  Fix: Build and install usr.bin/mklocale
Line 792  Fix: Build and install usr.bin/mklocale
 Symptom:undefined reference to `__assert13' or `__unsetenv13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'
Line 701  Fix:    Rebuild and install lib/libc
Line 800  Fix:    Rebuild and install lib/libc
 Symptom:lint does not understand the '-X' option  Symptom:lint does not understand the '-X' option
 Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint  Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint
   Symptom:Update build fails in src/tools/gcc complaining that a variable
           (e.g. CPPFLAGS) has changed since the previous run.
   Fix:    Run "nbmake-${ARCH} clean" in src/tools/gcc or do a clean build.
   Symptom:cvs [update aborted]: cannot open directory /cvsroot/src/...:
           No such file or directory.
   Cause:  If a directory is created by mistake, then it is sometimes
           deleted from the CVS repository using administrative commands
           that bypass the normal cvs access controls.  If your cvs working tree
           contains references to a directory that has been deleted on the
           server in this way, then "cvs update" reports this error.
   Fix:    Recursively delete the affected directory from your working tree
           and try the update again.

Removed from v.  
changed lines
  Added in v.1.285

CVSweb <webmaster@jp.NetBSD.org>