[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version and 1.192

version, 2004/07/23 08:45:42 version 1.192, 2009/02/07 13:44:48
Line 1 
Line 1 
 $NetBSD$  $NetBSD$
 This file is intended to be a brief introduction to the build  This file (UPDATING) is intended to be a brief reference to recent
 process and a reference on what to do if something doesn't work.  changes that might cause problems in the build process, and a guide for
   what to do if something doesn't work.
   For a more detailed description of the recommended way to build NetBSD
   using build.sh, see the BUILDING file.
   Note that much of the advice in this UPDATING file was written before
   build.sh existed.  Nevertheless, the advice here may be useful for
   working around specific problems with build.sh.
 For a more detailed description see Makefile.  See also: BUILDING, build.sh, Makefile.
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
 20040715:  20090126:
         The rc.d/sendmail script now uses a heuristic to determine          The posix_fadvise system call changed assembly stub type. You need to
         if sendmail should be started at boot time.  It checks the          'rm -f posix_fadvise.*' in the libc build directory to avoid using
         contents of /etc/mailer.conf, /etc/mail/submit.cf, and the          the old assembly stub.
         owner and mode of the sendmail binary to see if any changes  
         to the mail infrastructure have been made.  If no changes  20090202:
         are detected, it will start an SMTP listener.          pkg_install now depends on the pkgdb cache for automatic conflict
           detection.  It is recommented to rebuild the cache with
         Setting sendmail=NO in /etc/rc.conf will override this.          ``pkg_admin rebuild''.
         If you are only using sendmail by default and only for  20090110:
         local delivery, it is important that you also update your          time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
         sendmail.cf so that the SMTP listener only listens on the          1. Make sure your kernel has COMPAT_50 in it. Build and install.
         loopback interface.             This is needed even in the MODULAR kernel because there is
              conditionally compiled code in rtsock.c.
 20040715:          2. make sure build.sh completes and the binaries in a chroot work
         The method by which athhal-elf.o gets pulled into i386             before installing.
         kernel builds has been changed again.  The latest version          3. If you don't use build.sh and you build directly to root, and
         of bsd.files.mk is no longer required.             your build breaks in the middle, don't despair. Make sure headers
              are installed properly, and start building libraries first libc
 20040326:             and libutil, install them and then continue building all the
              libraries in src/lib and src/gnu/lib and install them. Once
         The method by which athhal-elf.o gets pulled into i386 kernel builds             the new libraries are installed, you can restart the build.
         has been changed. The file is now stored as a uuencode file in CVS          4. If you compile packages and you notice link time warnings,
         and the generated Makefile will use the new .uue rules from bsd.file.mk             rebuild the required packages to update their shared libraries.
         to build it.             Any package you rebuild will require rebuilding all the packages
              that depend on it.
         This means you must have the latest bsd.files.mk installed when          5. Next time you run pwd_mkdb with the new binary, the file
         building a kernel without USETOOLS=yes.             will be upgraded and it will not be backwards compatible.
           6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
 20040318:             lastlogx(5)) have been versioned, and there is a heuristic
         A bug in the cgd(4) blowfish code was corrected, without             for utmp. You are better off removing the old files after
         provision of backwards compatibility, after several public             upgrading.  The automated clearing of /var/run during
         notices over several months. Users of cgd with blowfish cipher             boot, and the automated rotating of files in /var/log by
         ONLY must dump their data before updating their kernels, and             newsyslog(8), may mean that you do not have to remove the
         recreate cgd's and restore data using the new kernel. See             files manually.
         (recent message to current-users, URL when mail-index has updated)          7. The optional accounting file (/var/account/acct, see
              accton(8)) has not been versioned, and will need to be
 20040313:             removed.  The automatic rotation of the accounting file by
         On acorn32, the opms and qms drivers have been withdrawn, and             /etc/daily limits the bad consequences of failure to remove
         the old wsqms driver is now called qms.  Kernel config files             the file.
         will need updating.  See the ones in sys/arch/acorn32/conf  
         for examples.  20081219:
           config(1) has been updated, and one of the files it creates -
 20040125:          swapnetbsd.o - has changed format.  You need to rebuild config
         On acorn32, the beep and sysbeep devices are no longer          (done automatically by build.sh) and then you need to rerun
         needed, and will need to be deleted from kernel configuration          config on all kernel configuration files before rebuilding those
         files.          kernels.
 20040109:  20081205:
         Compatibility for old ffs superblock layouts has been          If you build with MKX11=no, you should remove /etc/rc.d/xdm and
         added, and the restrictive fsck checks have been reenabled          /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
         when using those layouts.  If you have been using -current          set and will appear as extra files for MKX11=no update builds.
         since 20030402, you may find that fsck again signals fatal  
         superblock mismatches.  To repair, make sure you have  20081122:
         an updated fsck_ffs and then you can use fsck_ffs -b 16 -c 4          On i386, various kernel options(4) in GENERIC including
         to complete the filesystem upgrade.  A message has          file systems have been disabled and moved into kernel modules.
         been added to the kernel which should detect this problem.          Before trying a new GENERIC kernel, you have to prepare the
         See the following discussion for more information:          following files as well as a new GENERIC kernel:
           - build and install kernel modules from src/sys/modules
         New binutils builds may fail due to old dependencies.          - install the latest bootloader, which will load a module
         It's necessary to "make cleandir" to ensure that            for the file system from which the kernel is loaded automatically
         the dependencies will be rebuilt correctly.  
           If you have to load your kernel from a file system which is not of
 20031111:          the same type as the root file system, you have to load the necessary
         A newer mkdep is needed.  Error noting that is          file system module manually on the boot prompt or in the boot.cfg file.
                 cc: Ambiguous abbreviation --  
 20031008:          If you built and installed a libc from sources between
         /usr/include/sys/disklabel_mbr.h was removed.          2008/08/20 and 2008/08/26 you got a broken strtouq(3)
         It's necessary to "make cleandir" to ensure that          which results in false errors reported by lint(1).
         the dependencies will be rebuilt correctly.          Since this breaks the libc build itself, manual help is
           needed -- lint must be disabled temporarily, e.g.:
 20031007:            $ (cd lib/libc && make MKLINT=no dependall install)
         A sign exension bug was fixed which set all the high bits  
         of our newly expanded ffs fs_flags.  This should only  20080813:
         affect users who installed or upgraded in September of 2003.          MKDEBUG build was broken because the .depend files did not know
         A small utility program was posted to tech-kern which          about .go files. You need to remove all .depend files and rebuild.
         should fix this problem, and a warning message was added  
         to the kernel which should discover and warn about it.  See  20080731:
         http://mail-index.NetBSD.org/tech-kern/2003/10/07/0005.html          WAPBL (metadata journaling support) has been added, but at this
           time isn't backwards compatible with pre-WAPBL aware kernels
 20030906:          and userland (fsck_ffs in particular).  Please make sure you
         With the addition of siginfo support the old signal trampoline          don't use a journaled filesystem with an older kernel/userland,
         code has been deprecated to COMPAT_16. Make sure that your running          especially an uncleanly mounted journaled filesystem.  WAPBL
         kernel has COMPAT_16 enabled before building userland.          also requires the super block to be in the UFS2 format.  You
           can use fsck_ffs -c 4 to update the superblock format.
         With the new openssl, there is some header and library shuffling.  20080721:
         rm -f /usr/include/des.h /usr/include/kerberosIV/* /lib/libdes* \          Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
         /usr/lib/libdes* before building.          isn't defined.
 20030703:  20080531:
         Texinfo was updated to 4.6.  To avoid failures when trying to          The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
         build the included texinfo files, do:          from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
           utility needs to be rebuilt and reinstalled as older binaries
         cd src/gnu/usr.bin/texinfo          won't work correctly. The following sequence of commands:
         make MKINFO=no dependall install  
             $ (cd sys/sys/ && nbmake-$arch includes)
 20030630:            $ (cd sbin/drvctl/ && nbmake-$arch clean)
         Groff was updated to 1.19; it's probably necessary to do            $ (cd sbin/drvctl/ && nbmake-$arch all)
                 cd share/mk && make install  
                 cd src/gnu/usr.bin/groff          leaves new drvctl utility in sbin/drvctl build directory.
                 make MKMAN=no dependall install  
         (untested).  20080503:
           The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
         Due to bugs in the export handling code, invalid export lines  20080521:
         were accepted before and caused the kernel to panic when          For a while, unprivileged UPDATE builds would fail to
         mountd got restarted because it freed memory that had already          succeed at the checkflist stage, complaining that
         been freed. This has been fixed and the kernel checks          ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
         export addresses very strictly. If you upgrade your kernel,          problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
         make sure you also upgrade mountd, because if your export          If you already hit this problem, update the .mk file,
         file contains lines with an old inet4 address syntax (i.e.          remove ${DESTDIR}/stand/<arch>, and re-run the build.
         a.b.c or a.b or a), they will get rejected by the new kernel.  
 20030402:          Linker warnings are now fatal if $WARNS>0.
         The superblock layout for FFS was changed.  If you have 1.6  
         fsck binaries, they will signal a fatal superblock mismatch  20080126:
         with the first alternate, because they compare too many          The posix_fadvise system call has been changed from an assembly
         fields (even ones that aren't useful).  If possible, upgrade          stub, to a c file that calls an assembly stub. You need to
         your fsck_ffs binary before using a new kernel.          'rm -f posix_fadvise.* .depend' in the libc build directory to
         None of this signals actual filesystem damage.          avoid using the old assembly stub.
 20030324:  20071209:
         sendmail version 8.12.8 was imported.  Since sendmail is          The acpiec(4) driver has been split into two attachments. If you
         now setgid to the smmsp group, and runs in "collection"          get ACPI errors before the attachment, please update your kernel
         mode for most common activities, there is a new config          configuration file appropriately or see GENERIC for more details.
         file called submit.cf that needs to live in /etc/mail.  
         The generic submit.cf sample in /usr/share/sendmail/cf  20071115:
         is named netbsd-msp.cf.  Upgrading your regular sendmail          The it(4) driver has been renamed to itesio(4) and the old port
         configuration file is also strongly advised.          argument specified in the kernel configuration file is not valid
           anymore. The itesio(4) driver now uses the Super I/O address port
         See the section named "MESSAGE SUBMISSION PROGRAM" in          rather than the EC address port. Please update your kernel
         the updated /usr/share/sendmail/README file for more          configuration file appropriately or see GENERIC for more details.
 20030117:          The pccons(4) driver has been removed from the NetBSD/shark port.
         Texinfo was updated to 4.3.  To avoid failures when trying to          You need to update any custom kernel configuration file you have
         build the included texinfo files, do:          to remove any references to pccons (which includes removing the
           now useless XSERVER option) and replace them with the correct
         cd src/gnu/usr.bin/texinfo          entries for the wscons driver.  See the GENERIC configuration file
         make MKINFO=no dependall install          for more details.
 20021223:  20070913:
         The METALOG format changed slightly, to remove the leading          A latent bug in dhclient/dhcpd that caused it to be unable to
         "${DESTDIR}" from path names.          enumerate interfaces was fixed.  The bug began to cause
         This only affects people building with UNPRIVED.          problems after 20070911 when the kernel's SIOCGIFCONF
         For complete safety, remove the DESTDIR entirely and          implementation was repaired.  From 20070529 to 20070911 racoon
         update tools/mtree, before running make build.          could not enumerate interfaces.  (These are noted because
           normal kernel/userspace version matching hygiene is not
 20021219:          sufficient to avoid this problem.)  Ensure that both kernel
         CVS repository layout was changed.  See the following for details          and userland are from after 20070913.
         if you are using (anonymous) cvs to update your tree.  
         http://mail-index.NetBSD.org/netbsd-announce/2002/12/19/0000.html          nbinstall has been renamed as it calls the target specific and
           the logic to pass down STRIP from mk been removed.  This forces
 20021219:          a re-installation of tools.
         install(1) had a '-N dbdir' option added, to specify an  
         alternate location to look up users & groups (instead  20070422:
         of the host system passwd(5) and group(5) databases).          The way OS emulations lookup filenames inside the emulation root
           has been changed.  Rather than modify the pathname (and copy back
         The build system was modified to take advantage of          to userspace) namei() and lookup() directly check the emulation
         this option (using ${NETBSDSRCDIR}/etc), so if you          root. One side effect is that absolute symlinks inside the emulated
         use USETOOLS==no, you may have to rebuild and          root file system will be relative to that file system - unless they
         reinstall usr.bin/xinstall first.          start /../ this is useful when the emulated root is a real install
           that has such links.
 20021130:          This might affect symlinks that have been added to reference outside
         fparseln(3) moved from libutil to libc.          the emulated root.
         If building to DESTDIR=/, reinstall the includes  
         and rebuild libc:  20070412:
                 make includes          The pckbc driver on sgimips IP32 has been removed. Use macekbc
                 make do-lib-libc          instead. See the GENERIC32_IP3x kernel configuration for an
         If using build.sh, "cd tools/compat && make clean"          example.
         before rebuilding the tools.  
 20021126:          src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
         The mk.conf(5) variable SYS_INCLUDE has been deprecated,          on many platforms due to incorrect flags settings.  If you
         including the optional "SYS_INCLUDE=symlinks" support.          updated and built after about 20070315, do "nbmake-$arch
         All header files, including <sys/*.h> are copied into          cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
         /usr/include.          rebuild of object files that might have been built
           incorrectly, and ensure that you have at least
 20021121:          src/lib/libc/Makefile 1.130.
         The C run-time support files crtbegin.o and crtend.o  
         (and their companions crtbeginS.o and crtendS.o) were  20070210:
         split up, with new crti.o and crtn.o files resulting.          src/sys/sys/{sa.h,savar.h} were removed.
         This means that libtool needs to be rebuilt once the            find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
         new libraries are installed.  The process of rebuilding                | xargs egrep -l '/sa.h|/savar.h' | xargs rm
         libtool will cause it to automatically notice the new          will allow dependencies on those files to get get rebuilt
         required files, but it *must* be rebuilt in order to  
         do this.  20070209:
           The threading model was changed when the newlock2 branch
         An out-of-date libtool will result in shared libraries          was merged to NetBSD-current.  If you boot with a new
         which lack _init() and _fini() routines, which means that          kernel (version 4.99.10), then you also need a new pthread
         their global contructors/destructors will not be invoked.          library (/usr/lib/libpthread.so.0.7).  If you boot with
           an old kernel, then you need the old pthread library
 20021121:          (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
         A bug related to how ARM ELF objects were tagged has been          the pthread library in sync, old threaded applications should
         corrected.          continue to work with an old or new kernel.  Note that named(8)
           is the only threaded application in the base system.
         NetBSD ARM ELF uses the soft-VFP floating point model by  
         default.  However, the assembler lacked support for marking  20061214:
         objects as using the VFP floating point format, and the          Following the move of string_to_flags() and flags_to_string()
         compiler was not properly passing the flag indicating "soft-VFP"          from the bin/ls/ sources to libutil, users doing UPDATE builds
         to the assembler.          will need to do a "make cleandir" in
                   tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
         Unfortunately, this means that the linker will now consider                  bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
         old (i.e. not marked "softvfp") NetBSD ARM ELF objects to be                  usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
         incompatible with new (properly marked) objects.                  as the installation images in distrib/
           in order to excise stale references to the old stat_flags.h header
         The problem will only manifest itself if you attempt to compile          file in the ls sources -- stat_flags.h has been removed.
         a new program using the fixed toolchain, and link that program  
         against old libraries which do not have the proper "softvfp"  20061108:
         markings.  ALL OF YOUR EXISTING BINARIES AND SHARED LIBRARIES          The configure script used in the src/tools/gcc compiler has been
         WILL CONTINUE TO WORK PROPERLY.          changed to indicate that our libc has ssp support built-in and
           does not depend on -lssp and -lssp-nonshared. You'll need to
         The only work-around for the problem is to recompile all of          make clean in src/tools/gcc first to rebuild the compiler.
         the libraries on the system.  The easiest way to do this for  
         system libraries is to install a binary snapshot; they are  20061009:
         generally available on releng.NetBSD.org.  Any packages you          The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
         have installed which supply libraries will have to be recompiled          available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
         if you wish to link new programs against those libraries.  
         If you have questions about this matter, please contact          The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
         port-arm@NetBSD.org.          withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
           kernel configuration for an example.  X servers from the last
 20021011:          few years should cope.
         Systrace has been improved to support privilege elevation.  
         Updating the kernel requires the userland part of systrace  20060703:
         to be rebuilt.          MPACPI is no more. We always configure PCI interrupts using ACPI
           if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
 20021010:          to ACPI_SCANPCI. Thanks to work from fvdl.
         The config(8) grammar was changed to allow options to register  
         dependencies on attributes, as well as other options.  Users  20060627:
         must update and reinstall usr.sbin/config before building a new          socket(2) has changed, and its system call has been versioned.
         kernel.          For userlands with the old version of socket(2), make sure that
           your kernel has 'options COMPAT_30' set, or else 'bad system call'
 20021009:          errors will result.
         A new attribute dependency syntax was introduced to config(8),  
         which is now used by the SCSI configuration description.  Users  
         must update and reinstall usr.sbin/config before building a new  
         Several changes have been made to the autoconfiguration  
         framework.  Users must update and reinstall usr.sbin/config  
         before building a new kernel.  
         The i386mp branch has been merged.  To compile a kernel, users  
         will need to add the option 'cpu* at mainbus?' to their configuration  
         file.  Multiprocessor kernels will need  
         ioapic*         at mainbus? apid ?  
         options         MULTIPROCESSOR  
         options         COM_MPLOCK  
         MKDYNAMICROOT=yes enabled by default, which means that  
         certain shared libraries are installed into /lib, the shared  
         linker is installed into /libexec, and all programs in /bin  
         and /sbin are dynamically linked.  
         If you do not use "make build", you should ensure that  
         you have the libraries and shared linker in the new locations,  
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  
         USE_NEW_TOOLCHAIN has been replaced with:  
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which  
                 there is no working in-tree toolchain (hppa, ns32k, sh5,  
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the  
                 root of an external toolchain (e.g. /usr/local/gnu).  This  
                 enables the cross-build framework even for TOOLCHAIN_MISSING  
         gehenna-devsw has been merged into the trunk. Need to update and  
         reinstall usr.sbin/config before building the kernel.  
         Crunched rescue tools (contents of /bin and /sbin, plus others)  
         are now provided in /rescue.  
         To ensure that these are built statically linked (no matter  
         what the setting of LDSTATIC is), use a crunchgen(1) built  
         from sources newer than 20020820 (see the next entry).  
         crunchgen(1) changed to ensure that the generated program  
         is statically linked.  
         Solution: update and reinstall usr.bin/crunch  
         smmsp user/group has been added for sendmail.  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         smmsp:*:17:17::0:0:Sendmail Message Submission Program:/nonexistent:/sbin/nologin  
         sshd user/group has been added.  Need to hand add this in, or sshd  
         will not let you log in (with default, or UsePrivlegeSeparation=yes)  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin  
         Also /var/chroot/sshd directory needs to be present (digged as part of  
         the build process).  
         NBUILDJOBS obsoleted in favor of just using -j.  
         etc/postinstall added, which performs various checks for  
         configuration file updates and changes, and can fix most of  
         the problems identified.  
         This should make it much easier to upgrade a system's  
         configuration from earlier systems (as far back as NetBSD 1.5).  
         <bsd.lib.mk> needs a new install(1) for its "-a cmd" support.  
         Build and install at usr.bin/xinstall before the build.  
         Raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  Be sure to have sbin/rtsol and usr.sbin/rtsold  
         newer than November 2001 when you upgrade the kernel.  
         ssh configuration files were moved from /etc to /etc/ssh.  Beware  
         if you restart your machine from remote.  Note that sshd.conf needs  
         to be changed (due to the use of "/etc" inside).  
         Users of the VAX port will need to rebuild and install gas  
         so it deal with the now present register prefix used in all  
         the VAX assembly files.  
         ntpd user/group has been added.  Need to hand add this in or builds  
         will break as mtree aborts early.  
         Add the following into /etc/group:  
         and the following to /etc/master.passwd (via vipw):  
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin  
         If you're attempting to build a snapshot on sparc64 and are getting  
         reloc errors from the toolchain groff binary this means your native  
         toolchain has some broken C++ bits.  
         To fix:  
         Build a new toolchain (i.e. build.sh -t)  
         Use the new toolchain to build and install natively (i.e. /usr/lib)  
         After this a snapshot will be able to be built.  
         In order for a sparc64 build to work you must have a working awk. If  
         you've built and installed a system with the new toolchain up to this  
         point you do not have a working awk as its ability to do floating  
         point is broken.  
         To build:  
         remake and install gnu/lib/libgcc  
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  
         against the new libgcc.a)  
         Kernel config information was changed to use defflag in  
         the various "files" files.  Bug fixes to config(8) are  
         required in order for this to work properly.  Make sure  
         to build and install in usr.sbin/config before attempting  
         to build a new kernel.  
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)  
         before building libc.  
         The new document BUILDING.mdoc (view with nroff | more, or  
         see pre-generated .txt and .html versions) describes the build  
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN  
         build process, are intended in the long run to replace this  
         manual update log.  
         Users building a USE_NEW_TOOLCHAIN system should read the  
         BUILDING document for caveats.  Generally, BUILDING supersedes  
         UPDATING for these systems, as tool updating is taken care of  
         by the new build system.  
         src/etc/Makefile now needs install to be able to handle  
         symlinks that point to nowhere. A bug in install that  
         prevented this was corrected.  
         Solution: update and reinstall usr.bin/xinstall  
         Better Solution: Use the new toolchain and it will just work  
         for you.  
         /etc/mtree/NetBSD.dist has been updated to take advantage of  
         absolute path support added to mtree(8). Older mtree(8)s don't  
         understand the format.  
         Solution: update and reinstall usr.sbin/mtree  
         Crunchgen has been updated to work via reach-over makefiles. Updating  
         is suggested before running a snapshot build  
         The new "ubcperf" code committed by Chuck Silvers removed  
         a header file, uvm/uvm_vnode.h.  There may be stale .depend  
         files that still reference this file.  
         Solution: "make cleandir && make dependall" in affected  
         grep.info is now built from grep.texi using makeinfo.  Since it  
         requires makeinfo v4.0, you need to install new texinfo before  
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  
         (i386 only): i386 kernel now uses new instructions like  
         `fxsave' which old gas doesn't understand.  To build the  
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  
         from your kernel configuration until you rebuild your userland.  
         See 20011029 above and BUILDING file in this directory for more information.  
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]  
         Bootloader update on ELF platforms.  DDB in kernels from before  
         this will be unable to read symbol tables provided by newer  
         Texinfo was updated to 4.0.  To avoid failures when trying to  
         build the included texinfo files, do:  
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
         To work around add by hand:  
         to /etc/group and add:  
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
         to master.passwd (use vipw for instance if doing by hand).  
         Now a make build should progress.  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         The following make directives are obsoleted.  
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be  
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build  
         additional library libcrypto_{idea,rc5}.  
 Hints for a more successful build:  Hints for a more successful build:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       Use build.sh, but do not use its "expert mode":
           This will automatically build the tools in the
              correct order, and it will keep the tools and the
              new build products from interfering with the running
              system.  This will allow you to ignore most of the
              other advice in this file.
     Build a new kernel first:      Build a new kernel first:
         This makes sure that any new system calls or features          This makes sure that any new system calls or features
            expected by the new userland will be present.  This             expected by the new userland will be present.  This
Line 565  Hints for a more successful build:
Line 275  Hints for a more successful build:
            about one.  It also makes it easier to clean up after             about one.  It also makes it easier to clean up after
            a build.  It's also necessary if you want to use the             a build.  It's also necessary if you want to use the
            same source tree for multiple machines.             same source tree for multiple machines.
            To use object directories:             To use object directories with build.sh:
               a) invoke build.sh with the "-M" or "-O" options.
              To use object directories without using build.sh:
             a) cd /usr/src ; make cleandir              a) cd /usr/src ; make cleandir
             b) Add "OBJMACHINE=yes" to /etc/mk.conf              b) Add "OBJMACHINE=yes" to /etc/mk.conf
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf              c) Add "MKOBJDIRS=yes" to /etc/mk.conf
Line 573  Hints for a more successful build:
Line 285  Hints for a more successful build:
            Note that running "make obj" in a directory will create             Note that running "make obj" in a directory will create
            in obj.$MACHINE directory.             in obj.$MACHINE directory.
     Build to a DESTDIR:      Build to a DESTDIR:
         This helps to keep old          This helps to keep old installed files (especially libraries)
            installed files (especially libraries) from interfering             from interfering with the new build.
            with the new build.             To build to a DESTDIR with build.sh, use the "-D" option.
            To build to a DESTDIR, set the DESTDIR environment             To build to a DESTDIR without using build.sh, set the DESTDIR
            variable before running make build.  It should be set to             environment variable before running make build.  It should be
            the pathname of an initially empty directory.             set to the pathname of an initially empty directory.
            Problems: you might need to update critical utilities             Problems: if you do not use build.sh, you might need to
                 without using DESTDIR since nothing is executed                  update critical utilities without using DESTDIR since
                 from what is installed in DESTDIR.                  nothing is executed from what is installed in DESTDIR.
                 (See critical utils, below)                  (See critical utils, below.)
     Build often:      Build often:
         This keeps critical utilities current enough to not choke          This keeps critical utilities current enough to not choke
         on any other part of the source tree that depends on up to          on any other part of the source tree that depends on up to
         date functionality.          date functionality.  If you use build.sh, you should not have
           this problem.
 What to do if things don't work:  What to do if things don't work:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Line 644  cd $NETBSDSRCDIR && make cleandir
Line 357  cd $NETBSDSRCDIR && make cleandir
 Critical utilities:  Critical utilities:
 ^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^
         usr.bin/compile_et          usr.bin/compile_et
         usr.bin/make          usr.bin/make
         usr.bin/yacc          usr.bin/yacc
         usr.bin/lex          usr.bin/lex
         usr.bin/xlint          usr.bin/xlint
         usr.sbin/config          usr.bin/config
 Other problems and possible solutions:  Other problems and possible solutions:
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
 Symptom:Complaints involving a Makefile.  Symptom:Complaints involving a Makefile.
 Fix:    Rebuild usr.bin/make:  Fix:    Rebuild usr.bin/make:
         cd usr.bin/make && make && make install          cd usr.bin/make && make && make install
Line 667  Fix: Make sure .mk files are up to date.
Line 376  Fix: Make sure .mk files are up to date.
         cd share/mk && make install          cd share/mk && make install
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
 Fix:    Rebuild usr.sbin/config  Fix:    Rebuild usr.bin/config
 Symptom:  Symptom:
 Fix:    Rebuild usr.bin/yacc  Fix:    Rebuild usr.bin/yacc
Line 693  Fix: Build and install usr.bin/mklocale
Line 402  Fix: Build and install usr.bin/mklocale
 Symptom:undefined reference to `__assert13' or `__unsetenv13'  Symptom:undefined reference to `__assert13' or `__unsetenv13'
 Fix:    Rebuild and install lib/libc  Fix:    Rebuild and install lib/libc
 Symptom:usr.sbin/config fails to build.  Symptom:usr.bin/config fails to build.
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
 Symptom:undefined reference to `getprogname' or `setprogname'  Symptom:undefined reference to `getprogname' or `setprogname'

Removed from v.  
changed lines
  Added in v.1.192

CVSweb <webmaster@jp.NetBSD.org>