[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/UPDATING between version 1.114 and 1.114.4.2

version 1.114, 2004/03/26 17:48:13 version 1.114.4.2, 2004/04/11 02:23:45
Line 8  For a more detailed description see Make
Line 8  For a more detailed description see Make
 Recent changes:  Recent changes:
 ^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^
   
 20040326:  20040410:
   
         The method by which athhal-elf.o gets pulled into i386 kernel builds          In order to build a complete release of 1.5 (post 1.5.3) the following
         has been changed. The file is now stored as a uuencode file in CVS          steps should be performed first:
         and the generated Makefile will use the new .uue rules from bsd.file.mk  
         to build it.  
   
         This means you must have the latest bsd.files.mk installed when                  1. Build and install a new make (usr.bin/make)
         building a kernel without USETOOLS=yes.                  2. Build and install new copies of libcrypto and libssl
                      (they are at new major versions so they won't conflict w.
                       existing libraries).
   
 20040318:  
         A bug in the cgd(4) blowfish code was corrected, without  
         provision of backwards compatibility, after several public  
         notices over several months. Users of cgd with blowfish cipher  
         ONLY must dump their data before updating their kernels, and  
         recreate cgd's and restore data using the new kernel. See  
         (recent message to current-users, URL when mail-index has updated)  
   
 20040313:  
         On acorn32, the opms and qms drivers have been withdrawn, and  
         the old wsqms driver is now called qms.  Kernel config files  
         will need updating.  See the ones in sys/arch/acorn32/conf  
         for examples.  
   
 20040125:  
         On acorn32, the beep and sysbeep devices are no longer  
         needed, and will need to be deleted from kernel configuration  
         files.  
   
 20040109:  
         Compatibility for old ffs superblock layouts has been  
         added, and the restrictive fsck checks have been reenabled  
         when using those layouts.  If you have been using -current  
         since 20030402, you may find that fsck again signals fatal  
         superblock mismatches.  To repair, make sure you have  
         an updated fsck_ffs and then you can use fsck_ffs -b 16 -c 4  
         to complete the filesystem upgrade.  A message has  
         been added to the kernel which should detect this problem.  
         See the following discussion for more information:  
         http://mail-index.NetBSD.org/current-users/2004/01/11/0022.html  
   
 20031203:  
         New binutils builds may fail due to old dependencies.  
         It's necessary to "make cleandir" to ensure that  
         the dependencies will be rebuilt correctly.  
   
 20031111:  
         A newer mkdep is needed.  Error noting that is  
                 cc: Ambiguous abbreviation --  
   
 20031008:  
         /usr/include/sys/disklabel_mbr.h was removed.  
         It's necessary to "make cleandir" to ensure that  
         the dependencies will be rebuilt correctly.  
   
 20031007:  
         A sign exension bug was fixed which set all the high bits  
         of our newly expanded ffs fs_flags.  This should only  
         affect users who installed or upgraded in September of 2003.  
         A small utility program was posted to tech-kern which  
         should fix this problem, and a warning message was added  
         to the kernel which should discover and warn about it.  See  
         http://mail-index.NetBSD.org/tech-kern/2003/10/07/0005.html  
   
 20030906:  
         With the addition of siginfo support the old signal trampoline  
         code has been deprecated to COMPAT_16. Make sure that your running  
         kernel has COMPAT_16 enabled before building userland.  
   
 20030801:  
         With the new openssl, there is some header and library shuffling.  
         rm -f /usr/include/des.h /usr/include/kerberosIV/* /lib/libdes* \  
         /usr/lib/libdes* before building.  
   
 20030703:  
         Texinfo was updated to 4.6.  To avoid failures when trying to  
         build the included texinfo files, do:  
   
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
   
 20030630:  
         Groff was updated to 1.19; it's probably necessary to do  
                 cd share/mk && make install  
                 cd src/gnu/usr.bin/groff  
                 make MKMAN=no dependall install  
         (untested).  
   
 20030516:  
         Due to bugs in the export handling code, invalid export lines  
         were accepted before and caused the kernel to panic when  
         mountd got restarted because it freed memory that had already  
         been freed. This has been fixed and the kernel checks  
         export addresses very strictly. If you upgrade your kernel,  
         make sure you also upgrade mountd, because if your export  
         file contains lines with an old inet4 address syntax (i.e.  
         a.b.c or a.b or a), they will get rejected by the new kernel.  
   
 20030402:  
         The superblock layout for FFS was changed.  If you have 1.6  
         fsck binaries, they will signal a fatal superblock mismatch  
         with the first alternate, because they compare too many  
         fields (even ones that aren't useful).  If possible, upgrade  
         your fsck_ffs binary before using a new kernel.  
         None of this signals actual filesystem damage.  
   
 20030324:  
         sendmail version 8.12.8 was imported.  Since sendmail is  
         now setgid to the smmsp group, and runs in "collection"  
         mode for most common activities, there is a new config  
         file called submit.cf that needs to live in /etc/mail.  
         The generic submit.cf sample in /usr/share/sendmail/cf  
         is named netbsd-msp.cf.  Upgrading your regular sendmail  
         configuration file is also strongly advised.  
   
         See the section named "MESSAGE SUBMISSION PROGRAM" in  
         the updated /usr/share/sendmail/README file for more  
         information.  
   
 20030117:  
         Texinfo was updated to 4.3.  To avoid failures when trying to  
         build the included texinfo files, do:  
   
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
   
 20021223:  
         The METALOG format changed slightly, to remove the leading  
         "${DESTDIR}" from path names.  
         This only affects people building with UNPRIVED.  
         For complete safety, remove the DESTDIR entirely and  
         update tools/mtree, before running make build.  
   
 20021219:  
         CVS repository layout was changed.  See the following for details  
         if you are using (anonymous) cvs to update your tree.  
   
         http://mail-index.NetBSD.org/netbsd-announce/2002/12/19/0000.html  
   
 20021219:  
         install(1) had a '-N dbdir' option added, to specify an  
         alternate location to look up users & groups (instead  
         of the host system passwd(5) and group(5) databases).  
   
         The build system was modified to take advantage of  
         this option (using ${NETBSDSRCDIR}/etc), so if you  
         use USETOOLS==no, you may have to rebuild and  
         reinstall usr.bin/xinstall first.  
   
 20021130:  
         fparseln(3) moved from libutil to libc.  
         If building to DESTDIR=/, reinstall the includes  
         and rebuild libc:  
                 make includes  
                 make do-lib-libc  
         If using build.sh, "cd tools/compat && make clean"  
         before rebuilding the tools.  
   
 20021126:  
         The mk.conf(5) variable SYS_INCLUDE has been deprecated,  
         including the optional "SYS_INCLUDE=symlinks" support.  
         All header files, including <sys/*.h> are copied into  
         /usr/include.  
   
 20021121:  
         The C run-time support files crtbegin.o and crtend.o  
         (and their companions crtbeginS.o and crtendS.o) were  
         split up, with new crti.o and crtn.o files resulting.  
         This means that libtool needs to be rebuilt once the  
         new libraries are installed.  The process of rebuilding  
         libtool will cause it to automatically notice the new  
         required files, but it *must* be rebuilt in order to  
         do this.  
   
         An out-of-date libtool will result in shared libraries  
         which lack _init() and _fini() routines, which means that  
         their global contructors/destructors will not be invoked.  
   
 20021121:  
         A bug related to how ARM ELF objects were tagged has been  
         corrected.  
   
         NetBSD ARM ELF uses the soft-VFP floating point model by  
         default.  However, the assembler lacked support for marking  
         objects as using the VFP floating point format, and the  
         compiler was not properly passing the flag indicating "soft-VFP"  
         to the assembler.  
   
         Unfortunately, this means that the linker will now consider  
         old (i.e. not marked "softvfp") NetBSD ARM ELF objects to be  
         incompatible with new (properly marked) objects.  
   
         The problem will only manifest itself if you attempt to compile  
         a new program using the fixed toolchain, and link that program  
         against old libraries which do not have the proper "softvfp"  
         markings.  ALL OF YOUR EXISTING BINARIES AND SHARED LIBRARIES  
         WILL CONTINUE TO WORK PROPERLY.  
   
         The only work-around for the problem is to recompile all of  
         the libraries on the system.  The easiest way to do this for  
         system libraries is to install a binary snapshot; they are  
         generally available on releng.NetBSD.org.  Any packages you  
         have installed which supply libraries will have to be recompiled  
         if you wish to link new programs against those libraries.  
   
         If you have questions about this matter, please contact  
         port-arm@NetBSD.org.  
   
 20021011:  
         Systrace has been improved to support privilege elevation.  
         Updating the kernel requires the userland part of systrace  
         to be rebuilt.  
   
 20021010:  
         The config(8) grammar was changed to allow options to register  
         dependencies on attributes, as well as other options.  Users  
         must update and reinstall usr.sbin/config before building a new  
         kernel.  
   
 20021009:  
         A new attribute dependency syntax was introduced to config(8),  
         which is now used by the SCSI configuration description.  Users  
         must update and reinstall usr.sbin/config before building a new  
         kernel.  
   
 20021003:  
         Several changes have been made to the autoconfiguration  
         framework.  Users must update and reinstall usr.sbin/config  
         before building a new kernel.  
   
 20021001:  
         The i386mp branch has been merged.  To compile a kernel, users  
         will need to add the option 'cpu* at mainbus?' to their configuration  
         file.  Multiprocessor kernels will need  
         ioapic*         at mainbus? apid ?  
         options         MULTIPROCESSOR  
         options         COM_MPLOCK  
   
 20020922:  
         MKDYNAMICROOT=yes enabled by default, which means that  
         certain shared libraries are installed into /lib, the shared  
         linker is installed into /libexec, and all programs in /bin  
         and /sbin are dynamically linked.  
         If you do not use "make build", you should ensure that  
         you have the libraries and shared linker in the new locations,  
         with:  
                 make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so  
   
 20020917:  
         USE_NEW_TOOLCHAIN has been replaced with:  
             -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which  
                 there is no working in-tree toolchain (hppa, ns32k, sh5,  
                 x86_64).  
             -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the  
                 root of an external toolchain (e.g. /usr/local/gnu).  This  
                 enables the cross-build framework even for TOOLCHAIN_MISSING  
                 platforms.  
   
 20020906:  
         gehenna-devsw has been merged into the trunk. Need to update and  
         reinstall usr.sbin/config before building the kernel.  
   
 20020822:  
         Crunched rescue tools (contents of /bin and /sbin, plus others)  
         are now provided in /rescue.  
   
         To ensure that these are built statically linked (no matter  
         what the setting of LDSTATIC is), use a crunchgen(1) built  
         from sources newer than 20020820 (see the next entry).  
   
 20020820:  
         crunchgen(1) changed to ensure that the generated program  
         is statically linked.  
   
         Solution: update and reinstall usr.bin/crunch  
   
 20020605:  
         smmsp user/group has been added for sendmail.  
   
         Add the following into /etc/group:  
   
         smmsp:*:17:  
   
         and the following to /etc/master.passwd (via vipw):  
   
         smmsp:*:17:17::0:0:Sendmail Message Submission Program:/nonexistent:/sbin/nologin  
   
 20020515:  
         sshd user/group has been added.  Need to hand add this in, or sshd  
         will not let you log in (with default, or UsePrivlegeSeparation=yes)  
   
         Add the following into /etc/group:  
   
         sshd:*:16:  
   
         and the following to /etc/master.passwd (via vipw):  
   
         sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin  
   
         Also /var/chroot/sshd directory needs to be present (digged as part of  
         the build process).  
   
 20020426:  
         NBUILDJOBS obsoleted in favor of just using -j.  
   
 20020426:  
         etc/postinstall added, which performs various checks for  
         configuration file updates and changes, and can fix most of  
         the problems identified.  
         This should make it much easier to upgrade a system's  
         configuration from earlier systems (as far back as NetBSD 1.5).  
   
 20020320:  
         <bsd.lib.mk> needs a new install(1) for its "-a cmd" support.  
         Build and install at usr.bin/xinstall before the build.  
   
 20020319:  
         Raw IPv6 socket now makes strict checking for sa_family and sa_len  
         on send(2) operation.  Be sure to have sbin/rtsol and usr.sbin/rtsold  
         newer than November 2001 when you upgrade the kernel.  
   
 20020311:  
         ssh configuration files were moved from /etc to /etc/ssh.  Beware  
         if you restart your machine from remote.  Note that sshd.conf needs  
         to be changed (due to the use of "/etc" inside).  
   
 20020223:  
         Users of the VAX port will need to rebuild and install gas  
         so it deal with the now present register prefix used in all  
         the VAX assembly files.  
   
 20020118:  
         ntpd user/group has been added.  Need to hand add this in or builds  
         will break as mtree aborts early.  
   
         Add the following into /etc/group:  
   
         ntpd:*:15:  
   
         and the following to /etc/master.passwd (via vipw):  
   
         ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin  
   
 20011207:  
         If you're attempting to build a snapshot on sparc64 and are getting  
         reloc errors from the toolchain groff binary this means your native  
         toolchain has some broken C++ bits.  
   
         To fix:  
   
         Build a new toolchain (i.e. build.sh -t)  
         Use the new toolchain to build and install natively (i.e. /usr/lib)  
   
         gnu/lib/libgcc  
         gnu/lib/libstdc++  
   
         After this a snapshot will be able to be built.  
   
 20011201:  
         In order for a sparc64 build to work you must have a working awk. If  
         you've built and installed a system with the new toolchain up to this  
         point you do not have a working awk as its ability to do floating  
         point is broken.  
   
         To build:  
   
         remake and install gnu/lib/libgcc  
         remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links  
         against the new libgcc.a)  
   
 20011128:  
         Kernel config information was changed to use defflag in  
         the various "files" files.  Bug fixes to config(8) are  
         required in order for this to work properly.  Make sure  
         to build and install in usr.sbin/config before attempting  
         to build a new kernel.  
   
 20011030:  
         libc/locale/wcstod.c now needs new lint(1). Update lint(1)  
         before building libc.  
   
 20011029:  
         The new document BUILDING.mdoc (view with nroff | more, or  
         see pre-generated .txt and .html versions) describes the build  
         procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN  
         build process, are intended in the long run to replace this  
         manual update log.  
   
         Users building a USE_NEW_TOOLCHAIN system should read the  
         BUILDING document for caveats.  Generally, BUILDING supersedes  
         UPDATING for these systems, as tool updating is taken care of  
         by the new build system.  
   
 20011028:  
         src/etc/Makefile now needs install to be able to handle  
         symlinks that point to nowhere. A bug in install that  
         prevented this was corrected.  
   
         Solution: update and reinstall usr.bin/xinstall  
         Better Solution: Use the new toolchain and it will just work  
         for you.  
   
 20011006:  
         /etc/mtree/NetBSD.dist has been updated to take advantage of  
         absolute path support added to mtree(8). Older mtree(8)s don't  
         understand the format.  
   
         Solution: update and reinstall usr.sbin/mtree  
   
 20011004:  
         Crunchgen has been updated to work via reach-over makefiles. Updating  
         is suggested before running a snapshot build  
   
 20010915:  
         The new "ubcperf" code committed by Chuck Silvers removed  
         a header file, uvm/uvm_vnode.h.  There may be stale .depend  
         files that still reference this file.  
   
         Solution: "make cleandir && make dependall" in affected  
         directories.  
   
 20010803:  
         grep.info is now built from grep.texi using makeinfo.  Since it  
         requires makeinfo v4.0, you need to install new texinfo before  
         building gnu/usr.bin/grep.  To install new texinfo, please follow  
         the instruction described in 20010726 entry.  
   
 20010803:  
         (i386 only): i386 kernel now uses new instructions like  
         `fxsave' which old gas doesn't understand.  To build the  
         kernel successfully, you need to build and install a new toolchain,  
         (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"  
         from your kernel configuration until you rebuild your userland.  
         See 20011029 above and BUILDING file in this directory for more information.  
         [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]  
   
 20010731:  
         Bootloader update on ELF platforms.  DDB in kernels from before  
         this will be unable to read symbol tables provided by newer  
         bootloaders.  
   
 20010726:  
         Texinfo was updated to 4.0.  To avoid failures when trying to  
         build the included texinfo files, do:  
   
         cd src/gnu/usr.bin/texinfo  
         make MKINFO=no dependall install  
   
 20010718:  
         Enabled correct .init/.fini processing in crt0.  The way this  
         was done was to change a -I directive to cc(1), which means  
         make(1) will have a stale dependency (it will be checking the  
         timestamp on the wrong "dot_init.h").  
   
         The symptom you will see is that new programs die with SIGSEGV  
         if you have a stale dependency.  
   
         Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so  
         before starting your build.  
   
 20010628:  
         A construct was added to uvm_page.h that uncovered a bug  
         in lint(1).  If you get a warning/error about a non-portable  
         bitfield, update your lint(1) before proceeding.  
   
 20010226:  
         Added named user/group to system. Need to hand add this in or builds  
         will break as mtree aborts early.  
   
         To work around add by hand:  
   
         named:*:14:  
   
         to /etc/group and add:  
   
         named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin  
   
         to master.passwd (use vipw for instance if doing by hand).  
   
         Now a make build should progress.  
   
 20010219:  
         get/setprogname() added. Any hostprogs that may use this will need  
         to be bootstrapped manually until the host system is current.  
   
         Known problems: sys/arch/macppc/stand/fixcoff  
                         usr.sbin/config (adding -DMAKE_BOOTSTRAP to  
                           CFLAGS and rebuilding should work)  
                         usr.sbin/mdsetimage - Build a static copy if  
                           building a snapshot before fully bootstrapped.  
   
 20010204:  
         prepare the code to compile with stricter gcc flags. in  
         particular start eliminating redundant declarations. Yacc  
         needs to be installed before make build.  
   
 20010114:  
         introduce .if commands(target) in make(1). You need to  
         bring everything up-to-date first, then without installing  
         anything make and install in usr.bin/make, then proceed  
         with make build.  
   
 20010101:  
         bsd.subdir.mk committed 20001230 had a bug which caused  
         afterinstall targets to run too soon; update again.  
   
 20001230:  
         New share/mk files needed to support .WAIT in SUBDIR variables.  
         If you get make errors,  
                 (cd share/mk; make install)  
         Also, PRINTOBJDIR has changed and is now used more heavily.  
   
 20001019:  
         The `ca' device driver has been replaced by `ld'; although the  
         major and minor numbers haven't changed, you should update your /dev  
         directory.  
   
 20000929:  
         The following make directives are obsoleted.  
         MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA  
         By default, RSA is built into libcrypto.  IDEA and RC5 will not be  
         built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build  
         additional library libcrypto_{idea,rc5}.  
   
   
 Hints for a more successful build:  
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  
     Build a new kernel first:  
         This makes sure that any new system calls or features  
            expected by the new userland will be present.  This  
            helps to avoid critical errors when upgrading.  
     Use object directories:  
         This helps to keep stale object  
            files from polluting the build if a Makefile "forgets"  
            about one.  It also makes it easier to clean up after  
            a build.  It's also necessary if you want to use the  
            same source tree for multiple machines.  
            To use object directories:  
             a) cd /usr/src ; make cleandir  
             b) Add "OBJMACHINE=yes" to /etc/mk.conf  
             c) Add "MKOBJDIRS=yes" to /etc/mk.conf  
             d) cd /usr/src ; make build  
            Note that running "make obj" in a directory will create  
            in obj.$MACHINE directory.  
     Build to a DESTDIR:  
         This helps to keep old  
            installed files (especially libraries) from interfering  
            with the new build.  
            To build to a DESTDIR, set the DESTDIR environment  
            variable before running make build.  It should be set to  
            the pathname of an initially empty directory.  
            Problems: you might need to update critical utilities  
                 without using DESTDIR since nothing is executed  
                 from what is installed in DESTDIR.  
                 (See critical utils, below)  
     Build often:  
         This keeps critical utilities current enough to not choke  
         on any other part of the source tree that depends on up to  
         date functionality.  
   
 What to do if things don't work:  
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  
 When things don't work there is usually a few things that commonly  
 should be done.  
     1)  make includes  
         This should be done automatically by make build.  
     2)  cd share/mk && make install  
         Again, automatically done by make build.  
   
 Failsafe rebuild of a small part of the tree:  
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  
 To make sure you rebuild something correctly you want to do  
 something like the following:  
     1)  Make sure the includes and .mk files are up to date.  
     2)  Make sure any program used to build the particular  
         utility is up to date.  (yacc, lex, etc...)  
     3)  cd ...path/to/util...  
         make cleandir  
         rm ...all obj directories...  
         make cleandir                   # yes, again  
         make obj  
         make depend && make  
   
 Failsafe rebuild of the entire tree:  
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  
 If you really want to make sure the source tree is clean and  
 ready for a build try the following.  Note that sourcing /etc/mk.conf  
 (a make(1) Makefile) in this manner is not right, and will not work  
 for anyone who uses any make(1) features in /etc/mk.conf.  
   
 ---cut here---  
 #!/bin/sh  
 . /etc/mk.conf  
   
 if [ -z $NETBSDSRCDIR ] ; then  
     NETBSDSRCDIR=/usr/src  
 fi  
 if [ \! -d $NETBSDSRCDIR ] ; then  
     echo Unable to find sources  
     exit 1  
 fi  
 find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;  
   
 if [ -z $BSDOBJDIR ] ; then  
     BSDOBJDIR=/usr/obj  
 fi  
 if [ -d $BSDOBJDIR ] ; then  
     rm -rf $BSDOBJDIR  
 fi  
   
 cd $NETBSDSRCDIR && make cleandir  
   
 ---cut here---  
   
 Critical utilities:  
 ^^^^^^^^^^^^^^^^^^^  
         gnu/usr.bin/egcs  
         usr.bin/compile_et  
         usr.bin/make  
         usr.bin/yacc  
         usr.bin/lex  
         usr.bin/xlint  
         usr.sbin/config  
   
 Other problems and possible solutions:  
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  
 Symptom:Unreasonable compiler errors.  
 Fix:    Rebuild gnu/usr.bin/egcs  
   
 Symptom:Complaints involving a Makefile.  
 Fix:    Rebuild usr.bin/make:  
         cd usr.bin/make && make && make install  
         Or, a failsafe method if that doesn't work:  
         cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin  
   
 Fix:    Make sure .mk files are up to date.  
         cd share/mk && make install  
   
 Symptom:Kernel `config' fails to configure any kernel, including GENERIC.  
 Fix:    Rebuild usr.sbin/config  
   
 Symptom:  
 Fix:    Rebuild usr.bin/yacc  
   
 Symptom:  
 Fix:    Rebuild usr.bin/lex  
   
 Symptom:  
 Fix:    rm /usr/lib/libbfd.a  
   
 Symptom:Obsolete intermediate files are used during compilation  
 Fix:    Try the following sequence of commands in the directory in question.  
         make cleandir; rm `make print-objdir`; make cleandir; make obj  
         (If you built the tree without "make obj" in the past, obsolete files  
         may remain.  The command tries to clean everything up)  
   
 Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type  
 Fix:    Rebuild and install usr.bin/menuc  
   
 Symptom:mklocale not found during build in share/locale/ctype  
 Fix:    Build and install usr.bin/mklocale  
   
 Symptom:undefined reference to `__assert13' or `__unsetenv13'  
 Fix:    Rebuild and install lib/libc  
   
 Symptom:usr.sbin/config fails to build.  
 Fix:    Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.  
   
 Symptom:undefined reference to `getprogname' or `setprogname'  
 Fix:    Rebuild and install lib/libc  
   
 Symptom:lint does not understand the '-X' option  
 Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint  

Legend:
Removed from v.1.114  
changed lines
  Added in v.1.114.4.2

CVSweb <webmaster@jp.NetBSD.org>