[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/Makefile between version 1.67 and 1.97

version 1.67, 1998/09/27 18:18:42 version 1.97, 1999/05/27 21:03:31
Line 1 
Line 1 
 #       $NetBSD$  #       $NetBSD$
   
   # This is the top-level makefile for building NetBSD. For an outline of
   # how to build a snapshot or release, as well as other release engineering
   # information, see http://www.netbsd.org/developers/releng/index.html
   #
   # Not everything you can set or do is documented in this makefile. In
   # particular, you should review the files in /usr/share/mk (especially
   # bsd.README) for general information on building programs and writing
   # Makefiles within this structure, and see the comments in src/etc/Makefile
   # for further information on installation and release set options.
   #
   # Variables listed below can be set on the make command line (highest
   # priority), in /etc/mk.conf (middle priority), or in the environment
   # (lowest priority).
   #
   # Variables:
   #   NBUILDJOBS is the number of jobs to start in parallel during a
   #       'make build'. It defaults to 1.
   #   MKMAN, if set to `no', will prevent building of manual pages.
   #   MKSHARE, if set to `no', will prevent building and installing
   #       anything in /usr/share.
   #   UPDATE will avoid a `make cleandir' at the start of `make build',
   #       as well as having the effects listed in /usr/share/mk/bsd.README.
   #   DESTDIR is the target directory for installation of the compiled
   #       software. It defaults to /. Note that programs are built against
   #       libraries installed in DESTDIR.
   #   EXPORTABLE_SYSTEM, when set, ensures that non-exportable crypto code
   #       is not compiled or installed. EXPORTABLE_SYSTEM is ignored if
   #       the `domestic/crypto-us' subtree does not exist.
   #   FORCE_DOMESTIC, when set, forces a descent into the domestic/crypto-us tree
   #       when handling the `all', `includes', and `install' targets. This
   #       flag is incompatible with the `build' target. It's generally a
   #       bad idea to use FORCE_DOMESTIC unless the ramifications are well
   #       understood, and should never be enabled by default. FORCE_DOMESTIC
   #       is ignored if the `domestic/crypto-us' subtree does not exist.
   #
   # Targets:
   #   build: builds a full release of netbsd in DESTDIR.
   #   release: does a `make build,' and then tars up the DESTDIR files
   #       into RELEASEDIR, in release(7) format. (See etc/Makefile for
   #       more information on this.)
   #   snapshot: a synonym for release.
   
 .include <bsd.own.mk>                   # for configuration variables.  .include <bsd.own.mk>                   # for configuration variables.
   
   
 HAVE_GCC28!=    ${CXX} --version | egrep "^(2\.8|egcs)" ; echo  HAVE_GCC28!=    ${CXX} --version | egrep "^(2\.8|egcs)" ; echo
   
   .if defined(NBUILDJOBS)
   _J= -j${NBUILDJOBS}
   .endif
   
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys  SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys
Line 16  SUBDIR+= gnu
Line 63  SUBDIR+= gnu
 # This is needed for libstdc++ and gen-params.  # This is needed for libstdc++ and gen-params.
 includes-gnu: includes-include includes-sys  includes-gnu: includes-include includes-sys
   
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  # Descend into the domestic/crypto-us tree if it exists AND
 SUBDIR+= domestic  #  1) the target is clean, cleandir, or obj, OR
   #  2) the the target is install or includes AND
   #     NOT compiling only "exportable" code AND
   #     doing it as part of installing a distribution, OR
   #  3) we Really Know what we're doing.  (Really!)
   #
   # NOTE:  due to the use of the make(foo) construct here, using the
   # clean, cleandir, and obj targets on the command line in conjunction
   # with any other target may produce unexpected results.
   
   .if exists(domestic)
   DOMESTIC=domestic
   .elif exists(crypto-us)
   DOMESTIC=crypto-us
   .endif
   
   .if defined(DOMESTIC) && \
       (make(clean) || make(cleandir) || make(obj) || \
       ((make(includes) || make(install)) && \
           !defined(EXPORTABLE_SYSTEM) && defined(_DISTRIB)) || \
       defined(FORCE_DOMESTIC))
   SUBDIR+= ${DOMESTIC}
 .endif  .endif
   
 .if exists(regress)  .if exists(regress)
Line 42  beforeinstall:
Line 110  beforeinstall:
 .endif  .endif
   
 afterinstall:  afterinstall:
 .ifndef NOMAN  .if ${MKMAN} != "no" && !defined(_BUILD)
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)          ${MAKE} whatis.db
 .endif  .endif
   
   whatis.db:
           (cd ${.CURDIR}/share/man && ${MAKE} makedb)
   
   # wrt info/dir below:  It's safe to move this over top of /usr/share/info/dir,
   # as the build will automatically remove/replace the non-pkg entries there.
   
 build: beforeinstall  build: beforeinstall
   .if defined(FORCE_DOMESTIC)
           @echo '*** CAPUTE!'
           @echo '    The FORCE_DOMESTIC flag is not compatible with "make build".'
           @echo '    Please correct the problem and try again.'
           @false
   .endif
   .if ${MKSHARE} != "no"
         (cd ${.CURDIR}/share/mk && ${MAKE} install)          (cd ${.CURDIR}/share/mk && ${MAKE} install)
         (cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)          (cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)
   .endif
 .if !defined(UPDATE)  .if !defined(UPDATE)
         ${MAKE} cleandir          ${MAKE} cleandir
 .endif  .endif
   .if empty(HAVE_GCC28)
   .if defined(DESTDIR)
           @echo "*** CAPUTE!"
           @echo "    You attempted to compile the world without egcs.  You must"
           @echo "    first install a native egcs compiler."
           @false
   .else
           (cd ${.CURDIR}/gnu/usr.bin/egcs && \
               ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \
               ${MAKE} MKMAN=no install && ${MAKE} cleandir)
   .endif
   .endif
         ${MAKE} includes          ${MAKE} includes
         (cd ${.CURDIR}/lib/csu && \          (cd ${.CURDIR}/lib/csu && \
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)              ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \
               ${MAKE} MKMAN=no install)
         (cd ${.CURDIR}/lib && \          (cd ${.CURDIR}/lib && \
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)              ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \
               ${MAKE} MKMAN=no install)
         (cd ${.CURDIR}/gnu/lib && \          (cd ${.CURDIR}/gnu/lib && \
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)              ${MAKE} depend && ${MAKE} ${_J} MKMAN=no MKINFO=no && \
 .if defined(USE_EGCS) && !empty(HAVE_GCC28)              ${MAKE} MKMAN=no MKINFO=no install)
         (cd ${.CURDIR}/gnu/lib/libgcc && \          ${MAKE} depend && ${MAKE} ${_J} && ${MAKE} _BUILD= install
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  .if defined(DOMESTIC) && !defined(EXPORTABLE_SYSTEM)
 .else          (cd ${.CURDIR}/${DOMESTIC} && ${MAKE} ${_J} _SLAVE_BUILD= build)
 .if     (${MACHINE_ARCH} != "powerpc")  .endif
         (cd ${.CURDIR}/gnu/usr.bin/gcc/libgcc && \          ${MAKE} whatis.db
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  
 .endif  
 .endif  
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  
 # libtelnet depends on libdes and libkrb.  libkrb depends on  
 # libcom_err.  
 .if exists(domestic/lib/libdes)  
         (cd ${.CURDIR}/domestic/lib/libdes && \  
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  
 .endif  
 .if exists(domestic/lib/libcom_err)  
         (cd ${.CURDIR}/domestic/lib/libcom_err && \  
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  
 .endif  
 .if exists(domestic/lib/libkrb)  
         (cd ${.CURDIR}/domestic/lib/libkrb && \  
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  
 .endif  
         (cd ${.CURDIR}/domestic/lib && \  
             ${MAKE} depend && NOMAN= ${MAKE} && NOMAN= ${MAKE} install)  
 .endif  
         ${MAKE} depend && ${MAKE} && ${MAKE} install  
 .if defined(USE_EGCS)  
 .if defined(DESTDIR) && (${HAVE_GCC28} == "")  
         @echo '***** WARNING ***** Your system compiler is not GCC 2.8 or higher'  
         @echo 'and you have built a distribution with GCC 2.8 and DESTDIR set.'  
         @echo 'You will need to rebuild libgcc from gnu/usr.bin/egcs/libgcc'  
         @echo 'in order to have full C++ support in the binary set.'  
 .else  
         (cd ${.CURDIR}/gnu/lib/libgcc &&\  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .endif # DESTDIR && !HAVE_GCC28  
 .endif # USE_EGCS  
         @echo -n "Build finished at: "          @echo -n "Build finished at: "
         @date          @date
   
   release snapshot: build
           (cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 release)
   
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>

Legend:
Removed from v.1.67  
changed lines
  Added in v.1.97

CVSweb <webmaster@jp.NetBSD.org>