[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/Makefile between version 1.75 and 1.191

version 1.75, 1998/12/12 23:44:22 version 1.191, 2002/12/02 08:23:41
Line 1 
Line 1 
 #       $NetBSD$  #       $NetBSD$
 .include <bsd.own.mk>                   # for configuration variables.  # This is the top-level makefile for building NetBSD. For an outline of
   # how to build a snapshot or release, as well as other release engineering
 HAVE_GCC28!=    ${CXX} --version | egrep "^(2\.8|egcs)" ; echo  # information, see http://www.netbsd.org/developers/releng/index.html
   # Not everything you can set or do is documented in this makefile. In
   # particular, you should review the files in /usr/share/mk (especially
   # bsd.README) for general information on building programs and writing
   # Makefiles within this structure, and see the comments in src/etc/Makefile
   # for further information on installation and release set options.
   # Variables listed below can be set on the make command line (highest
   # priority), in /etc/mk.conf (middle priority), or in the environment
   # (lowest priority).
   # Variables:
   #   DESTDIR is the target directory for installation of the compiled
   #       software. It defaults to /. Note that programs are built against
   #       libraries installed in DESTDIR.
   #   MKMAN, if set to `no', will prevent building of manual pages.
   #   MKOBJDIRS, if not set to `no', will build object directories at
   #       an appropriate point in a build.
   #   MKSHARE, if set to `no', will prevent building and installing
   #       anything in /usr/share.
   #   UPDATE, if defined, will avoid a `make cleandir' at the start of
   #       `make build', as well as having the effects listed in
   #       /usr/share/mk/bsd.README.
   #   NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
   #       of the `make build'.
   #   NOINCLUDES will avoid the `make includes' usually done by `make build'.
   # Targets:
   #   build:
   #       Builds a full release of NetBSD in DESTDIR.  If BUILD_DONE is
   #       set, this is an empty target.
   #   release:
   #       Does a `make build,' and then tars up the DESTDIR files
   #       into RELEASEDIR, in release(7) format. (See etc/Makefile for
   #       more information on this.)
   #   regression-tests:
   #       Runs the regression tests in "regress" on this host.
   # Targets invoked by `make build,' in order:
   #   cleandir:        cleans the tree.
   #   obj:             creates object directories.
   #   do-tools:        builds host toolchain.
   #   do-distrib-dirs: creates the distribution directories.
   #   includes:        installs include files.
   #   do-lib-csu:      builds and installs prerequisites from lib/csu.
   #   do-lib-libc:     builds and installs prerequisites from lib/libc.
   #   do-lib:          builds and installs prerequisites from lib.
   #   do-gnu-lib:      builds and installs prerequisites from gnu/lib.
   #   do-ld.so:        builds and installs prerequisites from libexec/ld.*_so.
   #   do-build:        builds and installs the entire system.
   .if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
   .MAKEFLAGS: -m ${.CURDIR}/share/mk
   # If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may
   # not be the top level objdir, because "make obj" can happen in the *middle*
   # of "make build" (long after <bsd.own.mk> is calculated it).  So, pre-set
   # _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}.
   .include <bsd.own.mk>
   # Sanity check: make sure that "make build" is not invoked simultaneously
   # with a standard recursive target.
   .if make(build) || make(release) || make(snapshot)
   .for targ in ${TARGETS:Nobj:Ncleandir}
   .if make(${targ}) && !target(.BEGIN)
           @echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
   _SUBDIR=        tools lib include gnu bin games libexec sbin usr.bin
   _SUBDIR+=       usr.sbin share rescue sys etc distrib regress
   # Weed out directories that don't exist.
   .for dir in ${_SUBDIR}
   .if exists(${dir}/Makefile) && (${BUILD_${dir}:Uyes} != "no")
   SUBDIR+=        ${dir}
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  .if exists(regress)
           @echo Running regression tests...
           @(cd ${.CURDIR}/regress && ${MAKE} regress)
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys  .if defined(UNPRIVED)
   NOPOSTINSTALL=  # defined
 .if exists(games)  afterinstall:
 SUBDIR+= games  .if ${MKMAN} != "no"
           (cd ${.CURDIR}/share/man && ${MAKE} makedb)
 .endif  .endif
   .if defined(UNPRIVED) && (${MKINFO} != "no")
           (cd ${.CURDIR}/gnu/usr.bin/texinfo/install-info && ${MAKE} infodir-meta)
   .if !defined(NOPOSTINSTALL)
           (cd ${.CURDIR} && ${MAKE} postinstall-check)
           @echo "   === Post installation checks ==="
           sh ${.CURDIR}/etc/postinstall -s ${.CURDIR} -d ${DESTDIR}/ check
           @echo "   ================================"
   postinstall-fix: .NOTMAIN
           @echo "   === Post installation fixes ==="
           sh ${.CURDIR}/etc/postinstall -s ${.CURDIR} -d ${DESTDIR}/ fix
           @echo "   ================================"
 SUBDIR+= gnu  # Targets (in order!) called by "make build".
 # This is needed for libstdc++ and gen-params.  
 includes-gnu: includes-include includes-sys  
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  BUILDTARGETS+=  check-tools
 SUBDIR+= domestic  .if !defined(UPDATE) && !defined(NOCLEANDIR)
   BUILDTARGETS+=  cleandir
 .endif  .endif
   .if ${MKOBJDIRS} != "no"
   .if ${USETOOLS} == "yes"
   BUILDTARGETS+=  do-tools
   .if !defined(NODISTRIBDIRS)
   BUILDTARGETS+=  do-distrib-dirs
   .if !defined(NOINCLUDES)
   BUILDTARGETS+=  includes
   BUILDTARGETS+=  do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.so do-build
 .if exists(regress)  # Enforce proper ordering of some rules.
 .ifmake !(install)  
 SUBDIR+= regress  .ORDER:         ${BUILDTARGETS}
   includes-lib:   includes-include includes-sys
   includes-gnu:   includes-lib
   # Build the system and install into DESTDIR.
   START_TIME!=    date
   .if defined(BUILD_DONE)
           @echo "Build already installed into ${DESTDIR}"
           @echo "Build started at: ${START_TIME}"
   .for tgt in ${BUILDTARGETS}
           @(cd ${.CURDIR} && ${MAKE} ${tgt})
           @echo   "Build started at:  ${START_TIME}"
           @printf "Build finished at: " && date
 .endif  .endif
 regression-tests:  # Build a full distribution, but not a release (i.e. no sets into
         @echo Running regression tests...  # ${RELEASEDIR}).
         @(cd ${.CURDIR}/regress && ${MAKE} regress)  
           (cd ${.CURDIR} && ${MAKE} NOPOSTINSTALL=1 build)
           (cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 distribution)
   .if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/"
           (cd ${.CURDIR}/distrib/sets && ${MAKE} checkflist)
 .endif  .endif
           @printf "make ${.TARGET} finished at: " && date
   # Build a release or snapshot (implies "make build").  Note that
   # in this case, the set lists will be checked before the tar files
   # are made.
 beforeinstall:  release snapshot:
 .ifmake build          (cd ${.CURDIR} && ${MAKE} NOPOSTINSTALL=1 build)
         @echo -n "Build started at: "          (cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 release)
         @date          @printf "make ${.TARGET} finished at: " && date
   # Special components of the "make build" process.
   .if ${TOOLCHAIN_MISSING} == "yes" && !defined(EXTERNAL_TOOLCHAIN)
           @echo '*** WARNING:  Building on MACHINE=${MACHINE} with missing toolchain.'
           @echo '*** May result in a failed build or corrupt binaries!'
   .elif defined(EXTERNAL_TOOLCHAIN)
           @echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.'
 .endif  .endif
 .ifndef DESTDIR  .if defined(NBUILDJOBS)
         (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)          @echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!'
         (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)  
 .endif  .endif
 afterinstall:  do-distrib-dirs:
 .if !defined(NOMAN) && !defined(NOSHARE)  .if !defined(DESTDIR) || ${DESTDIR} == ""
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)          (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
           (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=${DESTDIR} distrib-dirs)
 .endif  .endif
 build: beforeinstall  .for targ in cleandir obj includes
 .if !defined(NOSHARE)  do-${targ}: ${targ}
         (cd ${.CURDIR}/share/mk && ${MAKE} install)          @true
         (cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)  .endfor
 .if !defined(UPDATE)  .for dir in tools lib/csu lib/libc lib gnu/lib
         ${MAKE} cleandir  do-${dir:S/\//-/}:
 .endif  .for targ in dependall install
 .if empty(HAVE_GCC28)          (cd ${.CURDIR}/${dir} && ${MAKE} ${targ})
 .if defined(DESTDIR)  .endfor
         @echo "*** CAPUTE!"  .endfor
         @echo "    You attempted to compile the world with egcs.  You must"  
         @echo "    first install a native egcs compiler."  do-ld.so:
         false  .for targ in dependall install
 .else  .if (${OBJECT_FMT} == "a.out")
         (cd ${.CURDIR}/gnu/usr.bin/egcs && \          (cd ${.CURDIR}/libexec/ld.aout_so && ${MAKE} ${targ})
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install && \  .endif
             ${MAKE} cleandir)  .if (${OBJECT_FMT} == "ELF")
 .endif          (cd ${.CURDIR}/libexec/ld.elf_so && ${MAKE} ${targ})
 .endif  .endif
         ${MAKE} includes  .endfor
         (cd ${.CURDIR}/lib/csu && \  
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)  do-build:
         (cd ${.CURDIR}/lib && \  .for targ in dependall install
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)          (cd ${.CURDIR} && ${MAKE} ${targ} BUILD_tools=no BUILD_lib=no)
         (cd ${.CURDIR}/gnu/lib && \  .endfor
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)  
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  # Speedup stubs for some subtrees that don't need to run these rules.
 # libtelnet depends on libdes and libkrb.  libkrb depends on  # (Tells <bsd.subdir.mk> not to recurse for them.)
 # libcom_err.  
 .if exists(domestic/lib/libdes)  .for dir in bin etc distrib games libexec regress sbin usr.sbin tools
         (cd ${.CURDIR}/domestic/lib/libdes && \  includes-${dir}:
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)          @true
 .endif  .endfor
 .if exists(domestic/lib/libcom_err)  .for dir in etc distrib regress
         (cd ${.CURDIR}/domestic/lib/libcom_err && \  install-${dir}:
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)          @true
 .endif  .endfor
 .if exists(domestic/lib/libkrb)  
         (cd ${.CURDIR}/domestic/lib/libkrb && \  # XXX this needs to change when distrib Makefiles are recursion compliant
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)  dependall-distrib depend-distrib all-distrib:
 .endif          @true
         (cd ${.CURDIR}/domestic/lib && \  
             ${MAKE} depend && ${MAKE} NOMAN= && ${MAKE} NOMAN= install)  
         ${MAKE} depend && ${MAKE} && ${MAKE} install  
         @echo -n "Build finished at: "  
   .include <bsd.obj.mk>
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>
   build-docs: ${.CURDIR}/BUILDING
           groff -mdoc -Tascii -P-b -P-u -P-o $> >$@

Removed from v.1.75  
changed lines
  Added in v.1.191

CVSweb <webmaster@jp.NetBSD.org>