Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files. =================================================================== RCS file: /ftp/cvs/cvsroot/src/Makefile,v rcsdiff: /ftp/cvs/cvsroot/src/Makefile,v: warning: Unknown phrases like `commitid ...;' are present. retrieving revision 1.43 retrieving revision 1.124 diff -u -p -r1.43 -r1.124 --- src/Makefile 1997/10/27 18:06:39 1.43 +++ src/Makefile 2001/06/10 13:12:32 1.124 @@ -1,22 +1,93 @@ -# $NetBSD: Makefile,v 1.43 1997/10/27 18:06:39 thorpej Exp $ +# $NetBSD: Makefile,v 1.124 2001/06/10 13:12:32 mrg Exp $ -.include # for configuration variables. +# This is the top-level makefile for building NetBSD. For an outline of +# how to build a snapshot or release, as well as other release engineering +# information, see http://www.netbsd.org/developers/releng/index.html +# +# Not everything you can set or do is documented in this makefile. In +# particular, you should review the files in /usr/share/mk (especially +# bsd.README) for general information on building programs and writing +# Makefiles within this structure, and see the comments in src/etc/Makefile +# for further information on installation and release set options. +# +# Variables listed below can be set on the make command line (highest +# priority), in /etc/mk.conf (middle priority), or in the environment +# (lowest priority). +# +# Variables: +# DESTDIR is the target directory for installation of the compiled +# software. It defaults to /. Note that programs are built against +# libraries installed in DESTDIR. +# MKMAN, if set to `no', will prevent building of manual pages. +# MKOBJDIRS, if not set to `no', will build object directories at +# an appropriate point in a build. +# MKSHARE, if set to `no', will prevent building and installing +# anything in /usr/share. +# NBUILDJOBS is the number of jobs to start in parallel during a +# 'make build'. It defaults to 1. +# UPDATE will avoid a `make cleandir' at the start of `make build', +# as well as having the effects listed in /usr/share/mk/bsd.README. +# NOCLEANDIR will avoid a `make cleandir' at the start of `make build', +# but without having the effects listed in /usr/share/mk/bsd.README. +# NOINCLUDES will avoid the `make includes' usually done by `make build'. +# +# Targets: +# build: builds a full release of netbsd in DESTDIR. If BUILD_DONE is +# set, this is an empty target. +# release: does a `make build,' and then tars up the DESTDIR files +# into RELEASEDIR, in release(7) format. (See etc/Makefile for +# more information on this.) +# snapshot: a synonym for release. +# +# Sub targets of `make build,' in order: +# buildstartmsg: displays the start time of the build. +# beforeinstall: creates the distribution directories. +# do-force-domestic: check's that FORCE_DOMESTIC isn't set (deprecated.) +# do-share-mk: installs /usr/share/mk files. +# do-cleandir: clean's the tree. +# do-make-obj: create's object directories if required. +# do-check-egcs: check's that we have a modern enough compiler (deprecated.) +# do-make-includes: install include files. +# do-lib-csu: build & install startup object files. +# do-lib: build & install system libraries. +# do-gnu-lib: build & install gnu system libraries. +# do-dependall: builds & install the entire system. +# do-domestic: build & install the domestic tree (deprecated.) +# do-whatisdb: build & install the `whatis.db' man database. +# buildendmsg: displays the end time of the build. + +.include + +MKOBJDIRS ?= no +HAVE_EGCS!= ${CXX} --version | egrep "^(2\.[89]|egcs)" ; echo + +.if defined(NBUILDJOBS) +_J= -j${NBUILDJOBS} +.endif + +.if defined(DESTDIR) +_M=-m ${DESTDIR}/usr/share/mk +.endif # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW -SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share +SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys +.if make(cleandir) || make(obj) +SUBDIR+= distrib +.ifdef MAKEOBJDIRPREFIX +SUBDIR+= etc +.endif +.endif + +includes-lib: includes-include includes-sys .if exists(games) SUBDIR+= games .endif SUBDIR+= gnu - -SUBDIR+= sys - -.if exists(domestic) && !defined(EXPORTABLE_SYSTEM) -SUBDIR+= domestic -.endif +# This is needed for libstdc++ and gen-params. +includes-gnu: includes-include includes-sys .if exists(regress) .ifmake !(install) @@ -25,34 +96,136 @@ SUBDIR+= regress regression-tests: @echo Running regression tests... - @(cd ${.CURDIR}/regress && ${MAKE} regress) + @(cd ${.CURDIR}/regress && ${MAKE} ${_M} regress) .endif +buildstartmsg: + @echo -n "Build started at: " + @date + +buildendmsg: + @echo -n "Build finished at: " + @date + +# If sharesrc is around, use its share/mk files to bootstrap until the +# mk files are installed (first step of make build). If installing to +# DESTDIR, don't bother, since the build will fail later on anyway. + beforeinstall: +.ifndef NODISTRIBDIRS .ifndef DESTDIR +.if exists(share/mk) + (cd ${.CURDIR}/etc && ${MAKE} -m ${.CURDIR}/share/mk DESTDIR=/ distrib-dirs) +.else (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs) +.endif .else (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs) .endif +.endif afterinstall: -.ifndef NOMAN - (cd ${.CURDIR}/share/man && ${MAKE} makedb) +.if ${MKMAN} != "no" && !defined(_BUILD) + ${MAKE} ${_M} whatis.db .endif -build: beforeinstall +whatis.db: + (cd ${.CURDIR}/share/man && ${MAKE} ${_M} makedb) + +# wrt info/dir below: It's safe to move this over top of /usr/share/info/dir, +# as the build will automatically remove/replace the non-pkg entries there. + +.if defined(BUILD_DONE) +build: + @echo "Build installed into ${DESTDIR}" +.else +build: + @${MAKE} ${_M} buildstartmsg + @${MAKE} ${_M} beforeinstall + @${MAKE} ${_M} do-force-domestic + @${MAKE} ${_M} do-share-mk + @${MAKE} ${_M} do-cleandir + @${MAKE} ${_M} do-make-obj + @${MAKE} ${_M} do-check-egcs + @${MAKE} ${_M} do-make-includes + @${MAKE} ${_M} do-lib-csu + @${MAKE} ${_M} do-lib + @${MAKE} ${_M} do-gnu-lib + @${MAKE} ${_M} do-dependall + @${MAKE} ${_M} do-domestic + @${MAKE} ${_M} do-whatisdb + @${MAKE} ${_M} buildendmsg +.endif + +do-force-domestic: +.if defined(FORCE_DOMESTIC) + @echo '*** CAPUTE!' + @echo ' The FORCE_DOMESTIC flag is not compatible with "make build".' + @echo ' Please correct the problem and try again.' + @false +.endif + +do-share-mk: +.if ${MKSHARE} != "no" (cd ${.CURDIR}/share/mk && ${MAKE} install) - ${MAKE} includes -.if !defined(UPDATE) - ${MAKE} cleandir -.endif - (cd ${.CURDIR}/lib/csu && ${MAKE} depend && ${MAKE} && ${MAKE} install) - (cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install) - (cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install) -.if exists(domestic) && !defined(EXPORTABLE_SYSTEM) - (cd ${.CURDIR}/domestic/lib/ && ${MAKE} depend && ${MAKE} && \ - ${MAKE} install) .endif - ${MAKE} depend && ${MAKE} && ${MAKE} install + +do-cleandir: +.if !defined(UPDATE) && !defined(NOCLEANDIR) + ${MAKE} ${_J} ${_M} cleandir +.endif + +do-make-obj: +.if ${MKOBJDIRS} != "no" + ${MAKE} ${_J} ${_M} obj +.endif + +do-check-egcs: +.if empty(HAVE_EGCS) +.if defined(DESTDIR) + @echo "*** CAPUTE!" + @echo " You attempted to compile the world without egcs. You must" + @echo " first install a native egcs compiler." + @false +.else + (cd ${.CURDIR}/gnu/usr.bin/egcs && \ + ${MAKE} ${_M} ${_J} dependall MKMAN=no && \ + ${MAKE} ${_M} MKMAN=no install && ${MAKE} ${_M} cleandir) +.endif +.endif + +do-make-includes: +.if !defined(NOINCLUDES) + ${MAKE} ${_M} includes +.endif + +do-lib-csu: + (cd ${.CURDIR}/lib/csu && \ + ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \ + ${MAKE} ${_M} MKSHARE=no install) + +do-lib: + (cd ${.CURDIR}/lib && \ + ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \ + ${MAKE} ${_M} MKSHARE=no install) + +do-gnu-lib: + (cd ${.CURDIR}/gnu/lib && \ + ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \ + ${MAKE} ${_M} MKSHARE=no install) + +do-dependall: + ${MAKE} ${_M} ${_J} dependall && ${MAKE} ${_M} _BUILD= install + +do-domestic: +.if defined(DOMESTIC) && !defined(EXPORTABLE_SYSTEM) + (cd ${.CURDIR}/${DOMESTIC} && ${MAKE} ${_M} ${_J} _SLAVE_BUILD= build) +.endif + +do-whatisdb: + ${MAKE} ${_M} whatis.db + +release snapshot: build + (cd ${.CURDIR}/etc && ${MAKE} ${_M} INSTALL_DONE=1 release) .include