Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

===================================================================
RCS file: /ftp/cvs/cvsroot/src/Makefile,v
rcsdiff: /ftp/cvs/cvsroot/src/Makefile,v: warning: Unknown phrases like `commitid ...;' are present.
retrieving revision 1.83
retrieving revision 1.207
diff -u -p -r1.83 -r1.207
--- src/Makefile	1999/02/09 19:52:50	1.83
+++ src/Makefile	2003/06/26 17:46:56	1.207
@@ -1,114 +1,353 @@
-#	$NetBSD: Makefile,v 1.83 1999/02/09 19:52:50 christos Exp $
+#	$NetBSD: Makefile,v 1.207 2003/06/26 17:46:56 drochner Exp $
 
-.include <bsd.own.mk>			# for configuration variables.
+#
+# This is the top-level makefile for building NetBSD. For an outline of
+# how to build a snapshot or release, as well as other release engineering
+# information, see http://www.netbsd.org/developers/releng/index.html
+#
+# Not everything you can set or do is documented in this makefile. In
+# particular, you should review the files in /usr/share/mk (especially
+# bsd.README) for general information on building programs and writing
+# Makefiles within this structure, and see the comments in src/etc/Makefile
+# for further information on installation and release set options.
+#
+# Variables listed below can be set on the make command line (highest
+# priority), in /etc/mk.conf (middle priority), or in the environment
+# (lowest priority).
+#
+# Variables:
+#   DESTDIR is the target directory for installation of the compiled
+#	software. It defaults to /. Note that programs are built against
+#	libraries installed in DESTDIR.
+#   MKMAN, if set to `no', will prevent building of manual pages.
+#   MKOBJDIRS, if not set to `no', will build object directories at
+#	an appropriate point in a build.
+#   MKSHARE, if set to `no', will prevent building and installing
+#	anything in /usr/share.
+#   UPDATE, if defined, will avoid a `make cleandir' at the start of
+#	`make build', as well as having the effects listed in
+#	/usr/share/mk/bsd.README.
+#   NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
+#	of the `make build'.
+#   NOINCLUDES will avoid the `make includes' usually done by `make build'.
+#
+# Targets:
+#   build:
+#	Builds a full release of NetBSD in DESTDIR, except for the
+#	/etc configuration files.
+#	If BUILD_DONE is set, this is an empty target.
+#   distribution:
+#	Builds a full release of NetBSD in DESTDIR, including the /etc
+#	configuration files.
+#   buildworld:
+#	As per `make distribution', except that it ensures that DESTDIR
+#	is not the root directory.
+#   installworld:
+#	Install the distribution from DESTDIR to INSTALLWORLDDIR (which
+#	defaults to the root directory).  Ensures that INSTALLWORLDDIR
+#	is the not root directory if cross compiling.
+#   release:
+#	Does a `make build', and then tars up the DESTDIR files
+#	into RELEASEDIR/${MACHINE}, in release(7) format.
+#	(See etc/Makefile for more information on this.)
+#   regression-tests:
+#	Runs the regression tests in "regress" on this host.
+#   sets:
+#	Populate ${RELEASEDIR}/${MACHINE}/binary/sets from ${DESTDIR}
+#   sourcesets:
+#	Populate ${RELEASEDIR}/source/sets from ${NETBSDSRCDIR}
+#
+# Targets invoked by `make build,' in order:
+#   cleandir:        cleans the tree.
+#   obj:             creates object directories.
+#   do-tools:        builds host toolchain.
+#   do-tools-compat: builds the "libnbcompat" library; needed for some
+#                    random host tool programs in the source tree.
+#   do-distrib-dirs: creates the distribution directories.
+#   includes:        installs include files.
+#   do-lib-csu:      builds and installs prerequisites from lib/csu.
+#   do-lib-libc:     builds and installs prerequisites from lib/libc.
+#   do-lib:          builds and installs prerequisites from lib.
+#   do-gnu-lib:      builds and installs prerequisites from gnu/lib.
+#   do-ld.so:        builds and installs prerequisites from libexec/ld.*_so.
+#   do-build:        builds and installs the entire system.
+#
+
+.if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
+.MAKEFLAGS: -m ${.CURDIR}/share/mk
+.endif
+
+#
+# If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may
+# not be the top level objdir, because "make obj" can happen in the *middle*
+# of "make build" (long after <bsd.own.mk> is calculated it).  So, pre-set
+# _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}.
+#
+_SRC_TOP_OBJ_=
+
+.include <bsd.own.mk>
+
+#
+# Sanity check: make sure that "make build" is not invoked simultaneously
+# with a standard recursive target.
+#
+
+.if make(build) || make(release) || make(snapshot)
+.for targ in ${TARGETS:Nobj:Ncleandir}
+.if make(${targ}) && !target(.BEGIN)
+.BEGIN:
+	@echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
+	@false
+.endif
+.endfor
+.endif
+
+_SUBDIR=	tools lib include gnu bin games libexec sbin usr.bin
+_SUBDIR+=	usr.sbin share rescue sys etc .WAIT distrib regress
+
+#
+# Weed out directories that don't exist.
+#
+
+.for dir in ${_SUBDIR}
+.if exists(${dir}/Makefile) && (${BUILD_${dir}:Uyes} != "no")
+SUBDIR+=	${dir}
+.endif
+.endfor
 
-# Configurations variables (can be set either in /etc/mk.conf or
-# as environement variable
-# NBUILDJOBS: the number of jobs to start in parallel in a 'make build'.
-#             defaults to 1
-# NOMAN: if set to 1, don't build and install man pages
-# NOSHARE: if set to 1, don't build or install /usr/share stuffs
-# UPDATE: if set to 1, don't do a 'make cleandir' before compile
-# DESTDIR: The target directory for installation (default to '/',
-#          which mean the current system is updated).
+.if exists(regress)
+regression-tests:
+	@echo Running regression tests...
+	@(cd ${.CURDIR}/regress && ${MAKE} regress)
+.endif
 
-HAVE_GCC28!=	${CXX} --version | egrep "^(2\.8|egcs)" ; echo
+.if defined(UNPRIVED)
+NOPOSTINSTALL=	# defined
+.endif
 
-.if defined(NBUILDJOBS)
-_J= -j${NBUILDJOBS}
+afterinstall:
+.if ${MKMAN} != "no"
+	(cd ${.CURDIR}/share/man && ${MAKE} makedb)
+.endif
+.if defined(UNPRIVED) && (${MKINFO} != "no")
+	(cd ${.CURDIR}/gnu/usr.bin/texinfo/install-info && ${MAKE} infodir-meta)
+.endif
+.if !defined(NOPOSTINSTALL)
+	(cd ${.CURDIR} && ${MAKE} postinstall-check)
 .endif
 
-# NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
+postinstall-check:
+	@echo "   === Post installation checks ==="
+	sh ${.CURDIR}/etc/postinstall -s ${.CURDIR} -d ${DESTDIR}/ check
+	@echo "   ================================"
+
+postinstall-fix: .NOTMAIN
+	@echo "   === Post installation fixes ==="
+	sh ${.CURDIR}/etc/postinstall -s ${.CURDIR} -d ${DESTDIR}/ fix
+	@echo "   ================================"
+
 
-SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys
+#
+# Targets (in order!) called by "make build".
+#
 
-.if exists(games)
-SUBDIR+= games
+BUILDTARGETS+=	check-tools
+.if !defined(UPDATE) && !defined(NOCLEANDIR)
+BUILDTARGETS+=	cleandir
+.endif
+.if ${MKOBJDIRS} != "no"
+BUILDTARGETS+=	obj
+.endif
+.if ${USETOOLS} == "yes"
+BUILDTARGETS+=	do-tools
+.endif
+.if !defined(NODISTRIBDIRS)
+BUILDTARGETS+=	do-distrib-dirs
+.endif
+.if !defined(NOINCLUDES)
+BUILDTARGETS+=	includes
 .endif
+BUILDTARGETS+=	do-tools-compat
+.if ${MKGCC} != "no"
+BUILDTARGETS+=	do-gnu-lib-libgcc
+.endif
+BUILDTARGETS+=	do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.so do-build
+BUILDTARGETS+=	do-obsolete
 
-SUBDIR+= gnu
-# This is needed for libstdc++ and gen-params.
-includes-gnu: includes-include includes-sys
+#
+# Enforce proper ordering of some rules.
+#
 
-# Descend into the domestic tree if it exists AND
-#  1) the target is clean, cleandir, or obj, OR
-#  2) the the target is install or includes AND NOT
-#    a) compiling only "exportable" code OR
-#    b) doing it as part of build.
+.ORDER:		${BUILDTARGETS}
+includes-lib:	includes-include includes-sys
+includes-gnu:	includes-lib
 
-.if exists(domestic) && \
-    (make(clean) || make(cleandir) || make(obj) || \
-    ((make(includes) || make(install)) && \
-    !(defined(EXPORTABLE_SYSTEM) || defined(_BUILD))))
-SUBDIR+= domestic
-.endif
+#
+# Build the system and install into DESTDIR.
+#
 
-.if exists(regress)
-.ifmake !(install)
-SUBDIR+= regress
-.endif
+START_TIME!=	date
 
-regression-tests:
-	@echo Running regression tests...
-	@(cd ${.CURDIR}/regress && ${MAKE} regress)
+build:
+.if defined(BUILD_DONE)
+	@echo "Build already installed into ${DESTDIR}"
+.else
+	@echo "Build started at: ${START_TIME}"
+.for tgt in ${BUILDTARGETS}
+	@(cd ${.CURDIR} && ${MAKE} ${tgt})
+.endfor
+	@echo   "Build started at:  ${START_TIME}"
+	@printf "Build finished at: " && date
+.endif
+
+#
+# Build a full distribution, but not a release (i.e. no sets into
+# ${RELEASEDIR}).  "buildworld" enforces a build to ${DESTDIR} != /
+#
+
+distribution buildworld:
+.if make(buildworld) && \
+    (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
+	@echo "Won't make ${.TARGET} with DESTDIR=/"
+	@false
+.endif
+	(cd ${.CURDIR} && ${MAKE} NOPOSTINSTALL=1 build)
+	(cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 distribution)
+.if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/"
+	(cd ${.CURDIR}/distrib/sets && ${MAKE} checkflist)
+.endif
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Install the distribution from $DESTDIR to $INSTALLWORLDDIR (defaults to `/')
+# If installing to /, ensures that the host's operating system is NetBSD and
+# the host's `uname -m` == ${MACHINE}.
+#
+
+HOST_UNAME_S!=	uname -s
+HOST_UNAME_M!=	uname -m
+
+installworld:
+.if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
+	@echo "Can't make ${.TARGET} to DESTDIR=/"
+	@false
+.endif
+.if !defined(INSTALLWORLDDIR) || \
+    ${INSTALLWORLDDIR} == "" || ${INSTALLWORLDDIR} == "/"
+.if (${HOST_UNAME_S} != "NetBSD")
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLWORLDDIR=/"
+	@false
+.endif
+.if (${HOST_UNAME_M} != ${MACHINE})
+	@echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLWORLDDIR=/"
+	@false
+.endif
+.endif
+	(cd ${.CURDIR}/distrib/sets && \
+	    ${MAKE} INSTALLDIR=${INSTALLWORLDDIR:U/} INSTALLSETS= installsets)
+	(cd ${.CURDIR} && \
+	    ${MAKE} DESTDIR=${INSTALLWORLDDIR} postinstall-check)
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Create sets from $DESTDIR or $NETBSDSRCDIR into $RELEASEDIR
+#
+
+.for tgt in sets sourcesets
+${tgt}:
+	(cd ${.CURDIR}/distrib/sets && ${MAKE} $@)
+.endfor
+
+#
+# Build a release or snapshot (implies "make build").  Note that
+# in this case, the set lists will be checked before the tar files
+# are made.
+#
+
+release snapshot:
+	(cd ${.CURDIR} && ${MAKE} NOPOSTINSTALL=1 build)
+	(cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 release)
+	@echo   "make ${.TARGET} started at:  ${START_TIME}"
+	@printf "make ${.TARGET} finished at: " && date
+
+#
+# Special components of the "make build" process.
+#
+
+check-tools:
+.if ${TOOLCHAIN_MISSING} == "yes" && !defined(EXTERNAL_TOOLCHAIN)
+	@echo '*** WARNING:  Building on MACHINE=${MACHINE} with missing toolchain.'
+	@echo '*** May result in a failed build or corrupt binaries!'
+.elif defined(EXTERNAL_TOOLCHAIN)
+	@echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.'
 .endif
-
-beforeinstall:
-.ifmake build
-	@echo -n "Build started at: "
-	@date
+.if defined(NBUILDJOBS)
+	@echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!'
 .endif
-.ifndef DESTDIR
+
+do-distrib-dirs:
+.if !defined(DESTDIR) || ${DESTDIR} == ""
 	(cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
 .else
-	(cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)
+	(cd ${.CURDIR}/etc && ${MAKE} DESTDIR=${DESTDIR} distrib-dirs)
 .endif
 
-afterinstall:
-.if !defined(NOMAN) && !defined(NOSHARE) && !defined(_BUILD)
-	${MAKE} whatis.db
-.endif
-
-whatis.db:
-	(cd ${.CURDIR}/share/man && ${MAKE} makedb)
-
-build: beforeinstall
-.if !defined(NOSHARE)
-	(cd ${.CURDIR}/share/mk && ${MAKE} install)
-	(cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)
-.endif
-.if !defined(UPDATE)
-	${MAKE} cleandir
-.endif
-.if empty(HAVE_GCC28)
-.if defined(DESTDIR)
-	@echo "*** CAPUTE!"
-	@echo "    You attempted to compile the world with egcs.  You must"
-	@echo "    first install a native egcs compiler."
-	false
-.else
-	(cd ${.CURDIR}/gnu/usr.bin/egcs && \
-	    ${MAKE} depend && ${MAKE} ${_J} NOMAN= && \
-	    ${MAKE} NOMAN= install && ${MAKE} cleandir)
-.endif
-.endif
-	${MAKE} _BUILD= includes
-	(cd ${.CURDIR}/lib/csu && \
-	    ${MAKE} depend && ${MAKE} ${_J} NOMAN= && ${MAKE} NOMAN= install)
-	(cd ${.CURDIR}/lib && \
-	    ${MAKE} depend && ${MAKE} ${_J} NOMAN= && ${MAKE} NOMAN= install)
-	(cd ${.CURDIR}/gnu/lib && \
-	    ${MAKE} depend && ${MAKE} ${_J} NOMAN= && ${MAKE} NOMAN= install)
-.if exists(domestic) && !defined(EXPORTABLE_SYSTEM)
-	(cd ${.CURDIR}/domestic/lib && \
-	    ${MAKE} depend && ${MAKE} ${_J} NOMAN= && ${MAKE} NOMAN= install)
-.endif
-	${MAKE} depend && ${MAKE} ${_J} && ${MAKE} _BUILD= install
-.if exists(domestic) && !defined(EXPORTABLE_SYSTEM)
-	(cd ${.CURDIR}/domestic && ${MAKE} ${_J} _SLAVE_BUILD= build)
-.endif
-	${MAKE} whatis.db
-	@echo -n "Build finished at: "
-	@date
+.for targ in cleandir obj includes
+do-${targ}: ${targ}
+	@true
+.endfor
+
+.for dir in tools tools/compat lib/csu gnu/lib/libgcc lib/libc lib gnu/lib
+do-${dir:S/\//-/g}:
+.for targ in dependall install
+	(cd ${.CURDIR}/${dir} && ${MAKE} ${targ})
+.endfor
+.endfor
+
+do-ld.so:
+.for targ in dependall install
+.if (${OBJECT_FMT} == "a.out")
+	(cd ${.CURDIR}/libexec/ld.aout_so && ${MAKE} ${targ})
+.endif
+.if (${OBJECT_FMT} == "ELF")
+	(cd ${.CURDIR}/libexec/ld.elf_so && ${MAKE} ${targ})
+.endif
+.endfor
+
+do-build:
+.for targ in dependall install
+	(cd ${.CURDIR} && ${MAKE} ${targ} BUILD_tools=no BUILD_lib=no)
+.endfor
+
+do-obsolete:
+	(cd ${.CURDIR}/etc && ${MAKE} install-obsolete-lists)
+
+#
+# Speedup stubs for some subtrees that don't need to run these rules.
+# (Tells <bsd.subdir.mk> not to recurse for them.)
+#
+
+.for dir in bin etc distrib games libexec regress sbin usr.sbin tools
+includes-${dir}:
+	@true
+.endfor
+.for dir in etc distrib regress
+install-${dir}:
+	@true
+.endfor
+
+#
+# XXX this needs to change when distrib Makefiles are recursion compliant
+# XXX many distrib subdirs need "cd etc && make snap_pre snap_kern" first...
+#
+dependall-distrib depend-distrib all-distrib:
+	@true
 
+.include <bsd.obj.mk>
 .include <bsd.subdir.mk>
+
+build-docs: ${.CURDIR}/BUILDING
+${.CURDIR}/BUILDING: doc/BUILDING.mdoc
+	groff -mdoc -Tascii -P-b -P-u -P-o $> >$@