[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/Makefile between version 1.54 and 1.170

version 1.54, 1998/05/21 01:40:19 version 1.170, 2002/04/29 12:09:13
Line 1 
Line 1 
 #       $NetBSD$  #       $NetBSD$
   
 .include <bsd.own.mk>                   # for configuration variables.  # This is the top-level makefile for building NetBSD. For an outline of
   # how to build a snapshot or release, as well as other release engineering
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  # information, see http://www.netbsd.org/developers/releng/index.html
   #
   # Not everything you can set or do is documented in this makefile. In
   # particular, you should review the files in /usr/share/mk (especially
   # bsd.README) for general information on building programs and writing
   # Makefiles within this structure, and see the comments in src/etc/Makefile
   # for further information on installation and release set options.
   #
   # Variables listed below can be set on the make command line (highest
   # priority), in /etc/mk.conf (middle priority), or in the environment
   # (lowest priority).
   #
   # Variables:
   #   DESTDIR is the target directory for installation of the compiled
   #       software. It defaults to /. Note that programs are built against
   #       libraries installed in DESTDIR.
   #   MKMAN, if set to `no', will prevent building of manual pages.
   #   MKOBJDIRS, if not set to `no', will build object directories at
   #       an appropriate point in a build.
   #   MKSHARE, if set to `no', will prevent building and installing
   #       anything in /usr/share.
   #   NBUILDJOBS is the number of jobs to start in parallel during a
   #       `make build'. It defaults to 1.
   #   UPDATE, if defined, will avoid a `make cleandir' at the start of
   #     `make build', as well as having the effects listed in
   #     /usr/share/mk/bsd.README.
   #   NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
   #     of the `make build'.
   #   NOINCLUDES will avoid the `make includes' usually done by `make build'.
   #
   # Targets:
   #   build:
   #       Builds a full release of NetBSD in DESTDIR.  If BUILD_DONE is
   #       set, this is an empty target.
   #   release:
   #       Does a `make build,' and then tars up the DESTDIR files
   #       into RELEASEDIR, in release(7) format. (See etc/Makefile for
   #       more information on this.)
   #   regression-tests:
   #       Runs the regression tests in "regress" on this host.
   #
   # Targets invoked by `make build,' in order:
   #   cleandir:        cleans the tree.
   #   obj:             creates object directories.
   #   do-tools:        builds host toolchain.
   #   do-distrib-dirs: creates the distribution directories.
   #   includes:        installs include files.
   #   do-lib-csu:      builds and installs prerequisites from lib/csu.
   #   do-lib:          builds and installs prerequisites from lib.
   #   do-gnu-lib:      builds and installs prerequisites from gnu/lib.
   #   do-build:        builds and installs the entire system.
   
   .if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
   .MAKEFLAGS: -m ${.CURDIR}/share/mk
   .endif
   
   # If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may
   # not be the top level objdir, because "make obj" can happen in the *middle*
   # of "make build" (long after <bsd.own.mk> is calculated it).  So, pre-set
   # _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}.
   _SRC_TOP_OBJ_=
   
   .include <bsd.own.mk>
   
   # Sanity check: make sure that "make build" is not invoked simultaneously
   # with a standard recursive target.
   
   .if make(build) || make(release) || make(snapshot)
   .for targ in ${TARGETS:Nobj:Ncleandir}
   .if make(${targ}) && !target(.BEGIN)
   .BEGIN:
           @echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
           @false
   .endif
   .endfor
   .endif
   
   .if defined(NBUILDJOBS)
   .if !target(.BEGIN)
   .BEGIN:
           @echo 'NBUILDJOBS is currently broken; see PR toolchain/14837.'
           @false
   .endif
   #_J=            -j${NBUILDJOBS}
   .endif
   
   _SUBDIR=        tools lib include gnu bin games libexec sbin usr.bin
   _SUBDIR+=       usr.sbin share sys etc distrib regress
   
   # Weed out directories that don't exist.
   
   .for dir in ${_SUBDIR}
   .if exists(${dir}/Makefile) && (${BUILD_${dir}:Uyes} != "no")
   SUBDIR+=        ${dir}
   .endif
   .endfor
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys  .if exists(regress)
   regression-tests:
           @echo Running regression tests...
           @(cd ${.CURDIR}/regress && ${MAKE} regress)
   .endif
   
 .if exists(games)  afterinstall: postinstall-check
 SUBDIR+= games  .if ${MKMAN} != "no"
           (cd ${.CURDIR}/share/man && ${MAKE} makedb)
   .endif
   .if defined(UNPRIVED) && (${MKINFO} != "no")
           (cd ${.CURDIR}/gnu/usr.bin/texinfo/install-info && ${MAKE} infodir-meta)
 .endif  .endif
   
 SUBDIR+= gnu  postinstall-check:
 # This is needed for libstdc++ and gen-params.          @echo "   === Post installation checks ==="
 includes-gnu: includes-include includes-sys          sh ${.CURDIR}/etc/postinstall -s ${.CURDIR}/etc -d ${DESTDIR}/etc check
           @echo "   ================================"
   
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  
 SUBDIR+= domestic  
 .endif  
   
 .if exists(regress)  # Targets (in order!) called by "make build".
 .ifmake !(install)  
 SUBDIR+= regress  BUILDTARGETS+=  check-tools
   .if !defined(UPDATE) && !defined(NOCLEANDIR)
   BUILDTARGETS+=  cleandir
   .endif
   .if ${MKOBJDIRS} != "no"
   BUILDTARGETS+=  obj
 .endif  .endif
   .if ${USETOOLS} == "yes"
   BUILDTARGETS+=  do-tools
   .endif
   .if !defined(NODISTRIBDIRS)
   BUILDTARGETS+=  do-distrib-dirs
   .endif
   .if !defined(NOINCLUDES)
   BUILDTARGETS+=  includes
   .endif
   BUILDTARGETS+=  do-lib-csu do-lib do-gnu-lib do-build
   
 regression-tests:  # Enforce proper ordering of some rules.
         @echo Running regression tests...  
         @(cd ${.CURDIR}/regress && ${MAKE} regress)  .ORDER:         ${BUILDTARGETS}
   includes-lib:   includes-include includes-sys
   includes-gnu:   includes-lib
   
   # Build the system and install into DESTDIR.
   
   build:
   .if defined(BUILD_DONE)
           @echo "Build already installed into ${DESTDIR}"
   .else
           @echo -n "Build started at: " && date
   .for tgt in ${BUILDTARGETS}
           @(cd ${.CURDIR} && ${MAKE} ${_J} ${tgt})
   .endfor
           @echo -n "Build finished at: " && date
 .endif  .endif
   
 beforeinstall:  # Build a full distribution, but not a release (i.e. no sets into
 .ifmake build  # ${RELEASEDIR}).
         @echo -n "Build started at: "  
         @date  distribution: build
           (cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 distribution)
   
   # Build a release or snapshot (implies "make build").
   
   release snapshot: build
           (cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 release)
   
   # Special components of the "make build" process.
   
   check-tools:
   .if defined(USE_NEW_TOOLCHAIN) && (${USE_NEW_TOOLCHAIN} != "nowarn")
           @echo '*** WARNING:  Building on MACHINE=${MACHINE} with USE_NEW_TOOLCHAIN.'
           @echo '*** This platform is not yet verified to work with the new toolchain,'
           @echo '*** and may result in a failed build or corrupt binaries!'
 .endif  .endif
 .ifndef DESTDIR  
   do-distrib-dirs:
   .if !defined(DESTDIR) || ${DESTDIR} == ""
         (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)          (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
 .else  .else
         (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)          (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=${DESTDIR} distrib-dirs)
 .endif  .endif
   
 afterinstall:  .for dir in tools lib/csu lib gnu/lib
 .ifndef NOMAN  do-${dir:S/\//-/}:
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)  .for targ in dependall install
 .endif          (cd ${.CURDIR}/${dir} && ${MAKE} ${_J} ${targ})
   .endfor
   .endfor
   
   do-build:
   .for targ in dependall install
           (cd ${.CURDIR} && ${MAKE} ${_J} ${targ} BUILD_tools=no BUILD_lib=no)
   .endfor
   
   # Speedup stubs for some subtrees that don't need to run these rules.
   # (Tells <bsd.subdir.mk> not to recurse for them.)
   
   .for dir in bin etc distrib games libexec regress sbin usr.sbin tools
   includes-${dir}:
           @true
   .endfor
   .for dir in etc distrib regress
   install-${dir}:
           @true
   .endfor
   
   # XXX this needs to change when distrib Makefiles are recursion compliant
   dependall-distrib depend-distrib all-distrib:
           @true
   
 build: beforeinstall  clean:
         (cd ${.CURDIR}/share/mk && ${MAKE} install)          rm -f METALOG
         (cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)  
 .if exists(domestic) && !defined (EXPORTABLE_SYSTEM)  
 .if exists(domestic/usr.bin/compile_et)  
         (cd ${.CURDIR}/domestic/usr.bin/compile_et && \  
             ${MAKE} depend && ${MAKE} && \  
             ${MAKE} install)  
 .endif  
 .if exists(domestic/usr.bin/make_cmds)  
         (cd ${.CURDIR}/domestic/usr.bin/make_cmds && \  
             ${MAKE} depend && ${MAKE} && \  
             ${MAKE} install)  
 .endif  
 .endif  
 .if !defined(UPDATE)  
         ${MAKE} cleandir  
 .endif  
         ${MAKE} includes  
         (cd ${.CURDIR}/lib/csu && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .if     (${MACHINE_ARCH} == "arm32") || \  
         (${MACHINE_ARCH} == "i386") || \  
         (${MACHINE_ARCH} == "mips") || \  
         (${MACHINE_ARCH} == "m68k") || \  
         (${MACHINE_ARCH} == "ns32k") || \  
         (${MACHINE_ARCH} == "sparc") || \  
         (${MACHINE_ARCH} == "vax")  
 .if defined(USE_EGCS)  
         (cd ${.CURDIR}/gnu/usr.bin/egcs/libgcc &&\  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .else  
         (cd ${.CURDIR}/gnu/usr.bin/gcc/libgcc &&\  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .endif # USE_EGCS  
 .endif # MACHINE_ARCH  
         (cd ${.CURDIR}/usr.bin/lex &&\  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/usr.bin/yacc && \  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/usr.bin/xlint && \  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  
 # libtelnet depends on libdes and libkrb.  libkrb depends on  
 # libcom_err.  
 .if exists(domestic/lib/libdes)  
         (cd ${.CURDIR}/domestic/lib/libdes && \  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .endif  
 .if exists(domestic/lib/libcom_err)  
         (cd ${.CURDIR}/domestic/lib/libcom_err && \  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .endif  
 .if exists(domestic/lib/libkrb)  
         (cd ${.CURDIR}/domestic/lib/libkrb && \  
             ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .endif  
         (cd ${.CURDIR}/domestic/lib/ && ${MAKE} depend && ${MAKE} && \  
             ${MAKE} install)  
 .endif  
         ${MAKE} depend && ${MAKE} && ${MAKE} install  
         @echo -n "Build finished at: "  
         @date  
   
   .include <bsd.obj.mk>
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>
   
   build-docs: ${.CURDIR}/BUILDING
   ${.CURDIR}/BUILDING: BUILDING.mdoc
           groff -mdoc -Tascii -P-b -P-u -P-o $> >$@

Legend:
Removed from v.1.54  
changed lines
  Added in v.1.170

CVSweb <webmaster@jp.NetBSD.org>