[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/Makefile between version 1.14 and 1.125

version 1.14, 1993/12/08 04:51:25 version 1.125, 2001/06/10 13:15:29
Line 1 
Line 1 
 #       $Id$  #       $NetBSD$
   
   # This is the top-level makefile for building NetBSD. For an outline of
   # how to build a snapshot or release, as well as other release engineering
   # information, see http://www.netbsd.org/developers/releng/index.html
   #
   # Not everything you can set or do is documented in this makefile. In
   # particular, you should review the files in /usr/share/mk (especially
   # bsd.README) for general information on building programs and writing
   # Makefiles within this structure, and see the comments in src/etc/Makefile
   # for further information on installation and release set options.
   #
   # Variables listed below can be set on the make command line (highest
   # priority), in /etc/mk.conf (middle priority), or in the environment
   # (lowest priority).
   #
   # Variables:
   #   DESTDIR is the target directory for installation of the compiled
   #       software. It defaults to /. Note that programs are built against
   #       libraries installed in DESTDIR.
   #   MKMAN, if set to `no', will prevent building of manual pages.
   #   MKOBJDIRS, if not set to `no', will build object directories at
   #       an appropriate point in a build.
   #   MKSHARE, if set to `no', will prevent building and installing
   #       anything in /usr/share.
   #   NBUILDJOBS is the number of jobs to start in parallel during a
   #       'make build'. It defaults to 1.
   #   UPDATE, if defined, will avoid a `make cleandir' at the start of
   #     `make build', as well as having the effects listed in
   #     /usr/share/mk/bsd.README.
   #   NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
   #     of the `make build'.
   #   NOINCLUDES will avoid the `make includes' usually done by `make build'.
   
   #
   # Targets:
   #   build: builds a full release of netbsd in DESTDIR. If BUILD_DONE is
   #       set, this is an empty target.
   #   release: does a `make build,' and then tars up the DESTDIR files
   #       into RELEASEDIR, in release(7) format. (See etc/Makefile for
   #       more information on this.)
   #   snapshot: a synonym for release.
   #
   # Sub targets of `make build,' in order:
   #   buildstartmsg: displays the start time of the build.
   #   beforeinstall: creates the distribution directories.
   #   do-force-domestic: check's that FORCE_DOMESTIC isn't set (deprecated.)
   #   do-share-mk: installs /usr/share/mk files.
   #   do-cleandir: clean's the tree.
   #   do-make-obj: create's object directories if required.
   #   do-check-egcs: check's that we have a modern enough compiler (deprecated.)
   #   do-make-includes: install include files.
   #   do-lib-csu: build & install startup object files.
   #   do-lib: build & install system libraries.
   #   do-gnu-lib: build & install gnu system libraries.
   #   do-dependall: builds & install the entire system.
   #   do-domestic: build & install the domestic tree (deprecated.)
   #   do-whatisdb: build & install the `whatis.db' man database.
   #   buildendmsg: displays the end time of the build.
   
   .include <bsd.own.mk>
   
   MKOBJDIRS ?= no
   HAVE_EGCS!=     ${CXX} --version | egrep "^(2\.[89]|egcs)" ; echo
   
   .if defined(NBUILDJOBS)
   _J= -j${NBUILDJOBS}
   .endif
   
   .if defined(DESTDIR)
   _M=-m ${DESTDIR}/usr/share/mk
   .endif
   
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games  SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys
 SUBDIR+= gnu  .if make(cleandir) || make(obj)
   SUBDIR+= distrib
   .ifdef MAKEOBJDIRPREFIX
   SUBDIR+= etc
   .endif
   .endif
   
 SUBDIR+= sys  includes-lib: includes-include includes-sys
   
   .if exists(games)
   SUBDIR+= games
   .endif
   
   SUBDIR+= gnu
   # This is needed for libstdc++ and gen-params.
   includes-gnu: includes-include includes-sys
   
 .if exists(regress)  .if exists(regress)
 .ifmake !(install)  .ifmake !(install)
Line 14  SUBDIR+= regress
Line 98  SUBDIR+= regress
   
 regression-tests:  regression-tests:
         @echo Running regression tests...          @echo Running regression tests...
         @( cd regress; make regress )          @(cd ${.CURDIR}/regress && ${MAKE} ${_M} regress)
   .endif
   
   buildstartmsg:
           @echo -n "Build started at: "
           @date
   
   buildendmsg:
           @echo -n "Build finished at: "
           @date
   
   # If sharesrc is around, use its share/mk files to bootstrap until the
   # mk files are installed (first step of make build).  If installing to
   # DESTDIR, don't bother, since the build will fail later on anyway.
   
   beforeinstall:
   .ifndef NODISTRIBDIRS
   .ifndef DESTDIR
   .if exists(share/mk)
           (cd ${.CURDIR}/etc && ${MAKE} -m ${.CURDIR}/share/mk DESTDIR=/ distrib-dirs)
   .else
           (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
 .endif  .endif
   .else
           (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)
   .endif
   .endif
   
   afterinstall:
   .if ${MKMAN} != "no" && !defined(_BUILD)
           ${MAKE} ${_M} whatis.db
   .endif
   
   whatis.db:
           (cd ${.CURDIR}/share/man && ${MAKE} ${_M} makedb)
   
   # wrt info/dir below:  It's safe to move this over top of /usr/share/info/dir,
   # as the build will automatically remove/replace the non-pkg entries there.
   
   .if defined(BUILD_DONE)
   build:
           @echo "Build installed into ${DESTDIR}"
   .else
   build:
           @${MAKE} ${_M} buildstartmsg
           @${MAKE} ${_M} beforeinstall
           @${MAKE} ${_M} do-force-domestic
           @${MAKE} ${_M} do-share-mk
           @${MAKE} ${_M} do-cleandir
           @${MAKE} ${_M} do-make-obj
           @${MAKE} ${_M} do-check-egcs
           @${MAKE} ${_M} do-make-includes
           @${MAKE} ${_M} do-lib-csu
           @${MAKE} ${_M} do-lib
           @${MAKE} ${_M} do-gnu-lib
           @${MAKE} ${_M} do-dependall
           @${MAKE} ${_M} do-domestic
           @${MAKE} ${_M} do-whatisdb
           @${MAKE} ${_M} buildendmsg
   .endif
   
   do-force-domestic:
   .if defined(FORCE_DOMESTIC)
           @echo '*** CAPUTE!'
           @echo '    The FORCE_DOMESTIC flag is not compatible with "make build".'
           @echo '    Please correct the problem and try again.'
           @false
   .endif
   
   do-share-mk:
   .if ${MKSHARE} != "no"
           (cd ${.CURDIR}/share/mk && ${MAKE} install)
   .endif
   
   do-cleandir:
   .if !defined(UPDATE) && !defined(NOCLEANDIR)
           ${MAKE} ${_J} ${_M} cleandir
   .endif
   
   do-make-obj:
   .if ${MKOBJDIRS} != "no"
           ${MAKE} ${_J} ${_M} obj
   .endif
   
   do-check-egcs:
   .if empty(HAVE_EGCS)
   .if defined(DESTDIR)
           @echo "*** CAPUTE!"
           @echo "    You attempted to compile the world without egcs.  You must"
           @echo "    first install a native egcs compiler."
           @false
   .else
           (cd ${.CURDIR}/gnu/usr.bin/egcs && \
               ${MAKE} ${_M} ${_J} dependall MKMAN=no && \
               ${MAKE} ${_M} MKMAN=no install && ${MAKE} ${_M} cleandir)
   .endif
   .endif
   
   do-make-includes:
   .if !defined(NOINCLUDES)
           ${MAKE} ${_M} includes
   .endif
   
   do-lib-csu:
           (cd ${.CURDIR}/lib/csu && \
               ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
               ${MAKE} ${_M} MKSHARE=no install)
   
   do-lib:
           (cd ${.CURDIR}/lib && \
               ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
               ${MAKE} ${_M} MKSHARE=no install)
   
   do-gnu-lib:
           (cd ${.CURDIR}/gnu/lib && \
               ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
               ${MAKE} ${_M} MKSHARE=no install)
   
   do-dependall:
           ${MAKE} ${_M} ${_J} dependall && ${MAKE} ${_M} _BUILD= install
   
   do-domestic:
   .if defined(DOMESTIC) && !defined(EXPORTABLE_SYSTEM)
           (cd ${.CURDIR}/${DOMESTIC} && ${MAKE} ${_M} ${_J} _SLAVE_BUILD= build)
   .endif
   
   do-whatisdb:
           ${MAKE} ${_M} whatis.db
   
   release snapshot: build
           (cd ${.CURDIR}/etc && ${MAKE} ${_M} INSTALL_DONE=1 release)
   
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>

Legend:
Removed from v.1.14  
changed lines
  Added in v.1.125

CVSweb <webmaster@jp.NetBSD.org>