[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/Makefile between version 1.86 and 1.112

version 1.86, 1999/02/13 02:54:17 version 1.112, 2000/04/10 14:47:22
Line 1 
Line 1 
 #       $NetBSD$  #       $NetBSD$
   
 .include <bsd.own.mk>                   # for configuration variables.  # This is the top-level makefile for building NetBSD. For an outline of
   # how to build a snapshot or release, as well as other release engineering
   # information, see http://www.netbsd.org/developers/releng/index.html
   #
   # Not everything you can set or do is documented in this makefile. In
   # particular, you should review the files in /usr/share/mk (especially
   # bsd.README) for general information on building programs and writing
   # Makefiles within this structure, and see the comments in src/etc/Makefile
   # for further information on installation and release set options.
   #
   # Variables listed below can be set on the make command line (highest
   # priority), in /etc/mk.conf (middle priority), or in the environment
   # (lowest priority).
   #
   # Variables:
   #   DESTDIR is the target directory for installation of the compiled
   #       software. It defaults to /. Note that programs are built against
   #       libraries installed in DESTDIR.
   #   MKMAN, if set to `no', will prevent building of manual pages.
   #   MKOBJDIRS, if not set to `no', will build object directories at
   #       an appropriate point in a build.
   #   MKSHARE, if set to `no', will prevent building and installing
   #       anything in /usr/share.
   #   NBUILDJOBS is the number of jobs to start in parallel during a
   #       'make build'. It defaults to 1.
   #   UPDATE will avoid a `make cleandir' at the start of `make build',
   #       as well as having the effects listed in /usr/share/mk/bsd.README.
   #
   # Targets:
   #   build: builds a full release of netbsd in DESTDIR. If BUILD_DONE is
   #       set, this is an empty target.
   #   release: does a `make build,' and then tars up the DESTDIR files
   #       into RELEASEDIR, in release(7) format. (See etc/Makefile for
   #       more information on this.)
   #   snapshot: a synonym for release.
   
 # Configurations variables (can be set either in /etc/mk.conf or  SRCTOP=.
 # as environement variable  .include <bsd.crypto.mk>                # for configuration variables.
 # NBUILDJOBS:   the number of jobs to start in parallel in a 'make build'.  
 #               defaults to 1  
 # MKMAN:        if set to no, don't build and install man pages  
 # MKSHARE:      if set to no, don't build or install /usr/share stuffs  
 # UPDATE:       if set to 1, don't do a 'make cleandir' before compile  
 # DESTDIR:      The target directory for installation (default to '/',  
 #               which mean the current system is updated).  
   
   .if defined(CRYPTOPATH)
   .sinclude "${CRYPTOPATH}/Makefile.frag"
   .endif
   
   MKOBJDIRS ?= no
 HAVE_GCC28!=    ${CXX} --version | egrep "^(2\.8|egcs)" ; echo  HAVE_GCC28!=    ${CXX} --version | egrep "^(2\.8|egcs)" ; echo
   
 .if defined(NBUILDJOBS)  .if defined(NBUILDJOBS)
 _J= -j${NBUILDJOBS}  _J= -j${NBUILDJOBS}
 .endif  .endif
   
   .if defined(DESTDIR)
   _M=-m ${DESTDIR}/usr/share/mk
   .endif
   
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys  SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys
   .if make(obj)
   SUBDIR+= distrib
   .endif
   
   includes-lib: includes-include includes-sys
   
 .if exists(games)  .if exists(games)
 SUBDIR+= games  SUBDIR+= games
Line 30  SUBDIR+= gnu
Line 71  SUBDIR+= gnu
 # This is needed for libstdc++ and gen-params.  # This is needed for libstdc++ and gen-params.
 includes-gnu: includes-include includes-sys  includes-gnu: includes-include includes-sys
   
 # Descend into the domestic tree if it exists AND  
 #  1) the target is clean, cleandir, or obj, OR  
 #  2) the the target is install or includes AND NOT  
 #    a) compiling only "exportable" code OR  
 #    b) doing it as part of build.  
   
 .if exists(domestic) && \  
     (make(clean) || make(cleandir) || make(obj) || \  
     ((make(includes) || make(install)) && \  
     !(defined(EXPORTABLE_SYSTEM) || defined(_BUILD))))  
 SUBDIR+= domestic  
 .endif  
   
 .if exists(regress)  .if exists(regress)
 .ifmake !(install)  .ifmake !(install)
 SUBDIR+= regress  SUBDIR+= regress
Line 50  SUBDIR+= regress
Line 78  SUBDIR+= regress
   
 regression-tests:  regression-tests:
         @echo Running regression tests...          @echo Running regression tests...
         @(cd ${.CURDIR}/regress && ${MAKE} regress)          @(cd ${.CURDIR}/regress && ${MAKE} ${_M} regress)
 .endif  .endif
   
 beforeinstall:  buildmsg:
 .ifmake build  
         @echo -n "Build started at: "          @echo -n "Build started at: "
         @date          @date
 .endif  
   beforeinstall:
   .ifndef NODISTRIBDIRS
 .ifndef DESTDIR  .ifndef DESTDIR
         (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)          (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
 .else  .else
         (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)          (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)
 .endif  .endif
   .endif
   
 afterinstall:  afterinstall:
 .if ${MKMAN} != "no" && !defined(_BUILD)  .if ${MKMAN} != "no" && !defined(_BUILD)
         ${MAKE} whatis.db          ${MAKE} ${_M} whatis.db
 .endif  .endif
   
 whatis.db:  whatis.db:
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)          (cd ${.CURDIR}/share/man && ${MAKE} ${_M} makedb)
   
 # wrt info/dir below:  It's safe to move this over top of /usr/share/info/dir,  # wrt info/dir below:  It's safe to move this over top of /usr/share/info/dir,
 # as the build will automatically remove/replace the non-pkg entries there.  # as the build will automatically remove/replace the non-pkg entries there.
   
 build: beforeinstall  .if defined(BUILD_DONE)
   build:
           @echo "Build installed into ${DESTDIR}"
   .else
   build: buildmsg beforeinstall
   .if defined(FORCE_DOMESTIC)
           @echo '*** CAPUTE!'
           @echo '    The FORCE_DOMESTIC flag is not compatible with "make build".'
           @echo '    Please correct the problem and try again.'
           @false
   .endif
 .if ${MKSHARE} != "no"  .if ${MKSHARE} != "no"
         (cd ${.CURDIR}/share/mk && ${MAKE} install)          (cd ${.CURDIR}/share/mk && ${MAKE} install)
         (cd ${.CURDIR}/share/tmac && ${MAKE} && ${MAKE} install)  
 .endif  .endif
 .if !defined(UPDATE)  .if !defined(UPDATE) && !defined(NOCLEANDIR)
         ${MAKE} cleandir          ${MAKE} ${_M} cleandir
   .endif
   .if ${MKOBJDIRS} != "no"
           ${MAKE} obj
 .endif  .endif
 .if empty(HAVE_GCC28)  .if empty(HAVE_GCC28)
 .if defined(DESTDIR)  .if defined(DESTDIR)
Line 91  build: beforeinstall
Line 133  build: beforeinstall
         @false          @false
 .else  .else
         (cd ${.CURDIR}/gnu/usr.bin/egcs && \          (cd ${.CURDIR}/gnu/usr.bin/egcs && \
             ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \              ${MAKE} ${_M} ${_J} dependall MKMAN=no && \
             ${MAKE} MKMAN=no install && ${MAKE} cleandir)              ${MAKE} ${_M} MKMAN=no install && ${MAKE} ${_M} cleandir)
   .endif
 .endif  .endif
   .if !defined(NOINCLUDES)
           ${MAKE} ${_M} includes
 .endif  .endif
         ${MAKE} _BUILD= includes  
         (cd ${.CURDIR}/lib/csu && \          (cd ${.CURDIR}/lib/csu && \
             ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \              ${MAKE} ${_M} ${_J} MKMAN=no dependall && \
             ${MAKE} MKMAN=no install)              ${MAKE} ${_M} MKMAN=no install)
         (cd ${.CURDIR}/lib && \          (cd ${.CURDIR}/lib && \
             ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \              ${MAKE} ${_M} ${_J} MKMAN=no MKINFO=no dependall && \
             ${MAKE} MKMAN=no install)              ${MAKE} ${_M} MKMAN=no MKINFO=no install)
         (cd ${.CURDIR}/gnu/lib && \          (cd ${.CURDIR}/gnu/lib && \
             ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \              ${MAKE} ${_M} ${_J} MKMAN=no MKINFO=no dependall && \
             ${MAKE} MKMAN=no install)              ${MAKE} ${_M} MKMAN=no MKINFO=no install)
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  .if target(cryptobuild)
         (cd ${.CURDIR}/domestic/lib && \          ${MAKE} ${_M} ${_J} cryptobuild
             ${MAKE} depend && ${MAKE} ${_J} MKMAN=no && \  .endif
             ${MAKE} MKMAN=no install)          ${MAKE} ${_M} ${_J} dependall && ${MAKE} ${_M} _BUILD= install
 .endif  .if defined(DOMESTIC) && !defined(EXPORTABLE_SYSTEM)
         ${MAKE} depend && ${MAKE} ${_J} && ${MAKE} _BUILD= install          (cd ${.CURDIR}/${DOMESTIC} && ${MAKE} ${_M} ${_J} _SLAVE_BUILD= build)
 .if exists(domestic) && !defined(EXPORTABLE_SYSTEM)  
         (cd ${.CURDIR}/domestic && ${MAKE} ${_J} _SLAVE_BUILD= build)  
 .endif  .endif
         ${MAKE} whatis.db          ${MAKE} ${_M} whatis.db
         @echo -n "Build finished at: "          @echo -n "Build finished at: "
         @date          @date
   .endif
   
   release snapshot: build
           (cd ${.CURDIR}/etc && ${MAKE} ${_M} INSTALL_DONE=1 release)
   
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>

Legend:
Removed from v.1.86  
changed lines
  Added in v.1.112

CVSweb <webmaster@jp.NetBSD.org>