[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Annotation of src/BUILDING, Revision 1.45

1.1       tv          1: BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)
                      3: NAME
                      4:      BUILDING - Procedure for building NetBSD from source code.
                      6: STATUS
                      7:      This document is a work-in-progress.  As such, the information described
                      8:      here may not match the reality of the build system as of this writing.
                      9:      Once this document is completely in sync with reality, this paragraph
                     10:      will be removed.
1.44      lukem      12:      Discrepancies between this documentation and the current reality of
                     13:      implementation are noted specially, as with the note below:
1.1       tv         14:
                     15:      Note: This document applies only to platforms which use the new toolchain
1.15      lukem      16:      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.
1.5       tv         17:      Platforms which have not yet been switched to the new toolchain should
                     18:      continue building traditionally, using the notes specified in the file
                     19:      UPDATING.
1.1       tv         20:
                     21: REQUIREMENTS
                     22:      NetBSD is designed to be buildable on most POSIX-compliant host systems.
                     23:      The basic build procedure is the same whether compiling natively (on the
                     24:      same NetBSD architecture) or cross compiling (on another architecture or
                     25:      OS).
                     27:      This source tree contains a special subtree, ``tools'', which uses the
                     28:      host system to create a build toolchain for the target architecture.  The
                     29:      host system must have at least C and C++ compilers in order to create the
                     30:      toolchain (make is not required); all other tools are created as part of
                     31:      the NetBSD build process.
1.22      lukem      33:            Note: A couple of host toolchain components are not yet available
                     34:            in the tools directory.  Also, some tools use non-POSIX, non-ANSI C
1.1       tv         35:            extensions and need to be standardized.  As a result, cross-compil-
                     36:            ing from systems other than NetBSD is not currently supported.
                     38: FILES
                     39:    Source tree layout
1.17      wiz        40:      doc/BUILDING.mdoc
                     41:                     This document (in -mdoc troff format; the original copy).
1.1       tv         42:
1.2       wiz        43:      BUILDING       This document (in plaintext).
1.1       tv         44:
1.44      lukem      45:      Makefile       The main Makefile for NetBSD; should only be run for
                     46:                     native builds with an appropriately up-to-date version of
1.1       tv         47:                     NetBSD make(1).  (For building from out-of-date systems or
                     48:                     on a non-native host, see the build.sh shell script.)
                     50:      UPDATING       Special notes for updating from an earlier revision of
                     51:                     NetBSD.  It is important to read this file before every
                     52:                     build of an updated source tree.
                     54:      build.sh       Bourne-compatible shell script used for building the host
                     55:                     build tools and the NetBSD system from scratch.  Can be
                     56:                     used for both native and cross builds, and should be used
                     57:                     instead of make(1) for any source tree that is updated and
                     58:                     recompiled regularly.
                     60:      crypto/dist/, dist/, gnu/dist/
                     61:                     Sources imported verbatim from third parties, without man-
                     62:                     gling the existing build structure.  Other source trees in
                     63:                     bin through usr.sbin use the NetBSD make(1) ``reachover''
1.44      lukem      64:                     Makefile semantics when building these programs for a
                     65:                     native host.
1.1       tv         66:
                     67:      distrib/, etc/
                     68:                     Sources for items used when making a full release snap-
1.27      lukem      69:                     shot, such as files installed in DESTDIR/etc on the desti-
                     70:                     nation system, boot media, and release notes.
1.1       tv         71:
                     72:      regress/       Regression test harness.  Can be cross-compiled, but only
                     73:                     run natively.
                     75:      sys/           NetBSD kernel sources.
                     77:      tools/         ``Reachover'' build structure for the host build tools.
                     78:                     This has a special method of determining out-of-date sta-
                     79:                     tus.
                     81:      bin/ ... usr.sbin/
                     82:                     Sources to the NetBSD userland (non-kernel) programs.  If
                     83:                     any of these directories are missing, they will be skipped
                     84:                     during the build.
                     86:    Build tree layout
                     87:      The NetBSD build tree is described in hier(7), and the release layout is
                     88:      described in release(7).
                     90: CONFIGURATION
1.8       lukem      91:    Environment variables
                     92:      Several environment variables control the behaviour of NetBSD builds.
                     94:      MACHINE           Machine type.
                     96:      MACHINE_ARCH      Machine architecture.
                     98:      MAKE              Path name to invoke make(1) as.
                    100:      MAKEFLAGS         Flags to invoke make(1) with.
                    102:      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-
                    103:                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.
1.36      lukem     104:                        MAKEOBJDIR can only be provided in the environment or
1.41      lukem     105:                        via the -O flag of build.sh.
1.8       lukem     106:
                    107:      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If
                    108:                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used
                    109:                        as the .OBJDIR for the current directory.  The current
                    110:                        directory may be read only.  MAKEOBJDIRPREFIX can only
1.36      lukem     111:                        be provided in the environment or via the -M flag of
                    112:                        build.sh.
1.8       lukem     113:
1.1       tv        114:    "make" variables
                    115:      Several variables control the behavior of NetBSD builds.  Unless other-
                    116:      wise specified, these variables may be set in either the process environ-
                    117:      ment or the make(1) configuration file specified by MAKECONF.
1.9       thorpej   119:      BUILDID     Identifier for the build.  The identifier will be appended to
                    120:                  object directory names, and can be consulted in the make(1)
                    121:                  configuration file in order to set additional build parame-
                    122:                  ters, such as compiler flags.
1.1       tv        124:      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-
                    125:                  cial options are passed to the compilation tools to prevent
                    126:                  their default use of the host system's /usr/include,
                    127:                  /usr/lib, and so forth.  This pathname should not end with a
                    128:                  slash (/) character (for installation into the system's root
1.7       lukem     129:                  directory, set DESTDIR to an empty string).  The directory
                    130:                  must reside on a file system which supports long file names
                    131:                  and hard links.
1.1       tv        132:
                    133:                  Default: Empty string if USETOOLS is ``yes''; unset other-
                    134:                  wise.
1.30      lukem     136:                  Note: build.sh will provide a default of destdir.MACHINE (in
                    137:                  the top-level .OBJDIR) unless run in `expert' mode
1.1       tv        139:      MAKECONF    The name of the make(1) configuration file.  Only settable in
                    140:                  the process environment.
                    142:                  Default: ``/etc/mk.conf''
1.45    ! lukem     144:      MAKEVERBOSE
        !           145:                  Level of verbosity of status messages.  Supported values:
        !           146:
        !           147:                  0    No descriptive messages are shown.
        !           148:
        !           149:                  1    Descriptive messages are shown.
        !           150:
        !           151:                  2    Descriptive messages (prefixed with a `#') and command
        !           152:                       output is not suppressed.
        !           153:
        !           154:                  Default: 2
        !           155:
1.1       tv        156:      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-
                    157:                  matted plaintext manual pages will be created during a build.
                    159:                  Default: ``yes''
                    161:      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-
                    162:                  graphic code will be included in a build; provided for the
                    163:                  benefit of countries that do not allow strong cryptography.
1.44      lukem     164:                  Will not affect use of the standard low-security password
                    165:                  encryption system, crypt(3).
1.1       tv        166:
                    167:                  Default: ``yes''
                    169:      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system
1.44      lukem     170:                  documentation destined for DESTDIR/usr/share/doc will be
                    171:                  installed during a build.
1.1       tv        172:
                    173:                  Default: ``yes''
1.4       tv        175:      MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for
                    176:                  programs intended to be run on the compile host, the name,
                    177:                  release, and architecture of the host operating system will
                    178:                  be suffixed to the name of the object directory created by
                    179:                  ``make obj''.  (This allows multiple host systems to compile
                    180:                  NetBSD for a single target.)  If set to ``no'', then programs
                    181:                  built to be run on the compile host will use the same object
                    182:                  directory names as programs built to be run on the target.
                    184:                  Default: ``no''
1.1       tv        186:      MKINFO      Can be set to ``yes'' or ``no''.  Indicates whether GNU Info
                    187:                  files, used for the documentation for most of the compilation
                    188:                  tools, will be created and installed during a build.
                    190:                  Default: ``yes''
                    192:      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)
                    193:                  will be run against portions of the NetBSD source code during
                    194:                  the build, and whether lint libraries will be installed into
1.27      lukem     195:                  DESTDIR/usr/libdata/lint.
1.1       tv        196:
                    197:                  Default: ``yes''
                    199:      MKMAN       Can be set to ``yes'' or ``no''.  Indicates whether manual
                    200:                  pages will be installed during a build.
                    202:                  Default: ``yes''
                    204:      MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native
1.44      lukem     205:                  Language System locale zone files will be compiled and
                    206:                  installed during a build.
1.1       tv        207:
                    208:                  Default: ``yes''
                    210:      MKOBJ       Can be set to ``yes'' or ``no''.  Indicates whether object
                    211:                  directories will be created when running ``make obj''.  If
                    212:                  set to ``no'', then all built files will be located inside
                    213:                  the regular source tree.
                    215:                  Default: ``yes''
                    217:      MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared
                    218:                  objects and libraries will be created and installed during a
                    219:                  build.  If set to ``no'', the entire built system will be
                    220:                  statically linked.
                    222:                  Default: Platform dependent.  As of this writing, all plat-
                    223:                  forms except sh3 default to ``yes''.
                    225:      MKPICINSTALL
                    226:                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)
1.44      lukem     227:                  format libraries (lib*_pic.a), used to generate shared
                    228:                  libraries, are installed during a build.
1.1       tv        229:
                    230:                  Default: ``yes''
                    232:      MKPROFILE   Can be set to ``yes'' or ``no''.  Indicates whether profiled
                    233:                  libraries (lib*_p.a) will be built and installed during a
                    234:                  build.
                    236:                  Default: ``yes''; however, some platforms turn off MKPROFILE
                    237:                  by default at times due to toolchain problems with profiled
                    238:                  code.
                    240:      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files
1.44      lukem     241:                  destined to reside in DESTDIR/usr/share will be built and
                    242:                  installed during a build.  If set to ``no'', then all of
1.27      lukem     243:                  MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to
                    244:                  ``no'' unconditionally.
1.1       tv        245:
                    246:                  Default: ``yes''
1.44      lukem     248:      MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an
                    249:                  unprivileged install will occur.  The user, group, permis-
                    250:                  sions, and file flags, will not be set on the installed item;
                    251:                  instead the information will be appended to a file called
1.38      lukem     252:                  METALOG in DESTDIR.  The contents of METALOG is used during
                    253:                  the generation of the distribution tar files to ensure that
                    254:                  the appropriate file ownership is stored.
                    256:                  Default: ``no''
1.44      lukem     258:      MKUPDATE    Can be set to ``yes'' or ``no''.  Indicates whether all
                    259:                  install operations intended to write to DESTDIR will compare
1.38      lukem     260:                  file timestamps before installing, and skip the install phase
1.44      lukem     261:                  if the destination files are up-to-date.  This also has
                    262:                  implications on full builds (see next subsection).
1.38      lukem     263:
                    264:                  Default: ``no''
1.1       tv        266:      TOOLDIR     Directory to hold the host tools, once built.  This directory
                    267:                  should be unique to a given host system and NetBSD source
                    268:                  tree.  (However, multiple targets may share the same TOOLDIR;
                    269:                  the target-dependent files have unique names.)  If unset, a
                    270:                  default based on the uname(1) information of the host plat-
1.39      lukem     271:                  form will be created in the .OBJDIR of src.
1.1       tv        272:
                    273:                  Default: Unset.
                    275:      USETOOLS    Indicates whether the tools specified by TOOLDIR should be
                    276:                  used as part of a build in progress.  Must be set to ``yes''
                    277:                  if cross-compiling.
                    279:                  yes    Use the tools from TOOLDIR.
                    281:                  no     Do not use the tools from TOOLDIR, but refuse to build
                    282:                         native compilation tool components that are version-
                    283:                         specific for that tool.
                    285:                  never  Do not use the tools from TOOLDIR, even when building
                    286:                         native tool components.  This is similar to the tradi-
                    287:                         tional NetBSD build method, but does not verify that
                    288:                         the compilation tools in use are up-to-date enough in
                    289:                         order to build the tree successfully.  This may cause
                    290:                         build or runtime problems when building the whole
                    291:                         NetBSD source tree.
                    293:                  Default: ``yes'' if building all or part of a whole NetBSD
                    294:                  source tree (detected automatically); ``no'' otherwise (to
1.44      lukem     295:                  preserve traditional semantics of the <bsd.*.mk> make(1)
                    296:                  include files).
1.1       tv        297:
                    298:    "make" variables for full builds
1.7       lukem     299:      These variables only affect the top level ``Makefile'' and do not affect
                    300:      manually building subtrees of the NetBSD source code.
1.1       tv        301:
1.20      lukem     302:      INSTALLWORLDDIR  Location for the ``make installworld'' target to install
                    303:                       to.
1.1       tv        304:
1.20      lukem     305:                       Default: ``/''
1.1       tv        306:
1.44      lukem     307:      MKOBJDIRS        Can be set to ``yes'' or ``no''.  Indicates whether
                    308:                       object directories will be created automatically (via a
1.20      lukem     309:                       ``make obj'' pass) at the start of a build.
1.1       tv        310:
1.34      lukem     311:                       Default: ``no''
1.1       tv        312:
1.38      lukem     313:      MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in addi-
                    314:                       tion to the effects described for MKUPDATE=yes above,
                    315:                       this implies the effects of NOCLEANDIR (i.e., ``make
                    316:                       cleandir'' is avoided).
                    318:                       Default: ``no''
1.20      lukem     320:      NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see
                    321:                       below)
1.1       tv        322:
1.20      lukem     323:                       Default: Unset.
1.1       tv        324:
1.20      lukem     325:      NOCLEANDIR       If set, avoids the ``make cleandir'' phase of a full
                    326:                       build.  This has the effect of allowing only changed
                    327:                       files in a source tree to be recompiled.  This can speed
                    328:                       up builds when updating only a few files in the tree.
1.1       tv        329:
1.20      lukem     330:                       Default: Unset.
1.1       tv        331:
1.20      lukem     332:      NODISTRIBDIRS    If set, avoids the ``make distrib-dirs'' phase of a full
                    333:                       build.  This skips running mtree(8) on DESTDIR, useful
                    334:                       on systems where building as an unprivileged user, or
                    335:                       where it is known that the system-wide mtree files have
                    336:                       not changed.
1.1       tv        337:
1.20      lukem     338:                       Default: Unset.
1.1       tv        339:
1.20      lukem     340:      NOINCLUDES       If set, avoids the ``make includes'' phase of a full
                    341:                       build.  This has the effect of preventing make(1) from
1.44      lukem     342:                       thinking that some programs are out-of-date simply
                    343:                       because the system include files have changed.  However,
1.20      lukem     344:                       this option should not be used when updating the entire
                    345:                       NetBSD source tree arbitrarily; it is suggested to use
1.38      lukem     346:                       MKUPDATE=yes in that case.
1.1       tv        347:
1.20      lukem     348:                       Default: Unset.
1.1       tv        349:
1.20      lukem     350:      RELEASEDIR       If set, specifies the directory to which a release(7)
                    351:                       layout will be written at the end of a ``make release''.
                    353:                       Default: Unset.
1.30      lukem     355:                       Note: build.sh will provide a default of releasedir (in
                    356:                       the top-level .OBJDIR) unless run in `expert' mode
1.1       tv        358: BUILDING
                    359:    "make" command line options
                    360:      This is only a summary of options available to make(1); only the options
                    361:      used most frequently with NetBSD builds are listed here.
1.10      sommerfe  363:      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
1.44      lukem     364:                 use .WAIT or have explicit dependancies as necessary to
                    365:                 enforce build ordering.  If you see build failures with -j,
1.10      sommerfe  366:                 please save complete build logs so the failures can be ana-
                    367:                 lyzed.
1.1       tv        369:      -m dir     Specify the default directory for searching for system Make-
                    370:                 file segments, mainly the <bsd.*.mk> files.  When building any
                    371:                 full NetBSD source tree, this should be set to the
                    372:                 ``share/mk'' directory in the source tree.  (This is set auto-
                    373:                 matically when building from the top level.)
                    375:      -n         Display the commands that would have been executed, but do not
                    376:                 actually execute them.  This will still cause recursion to
                    377:                 take place.
                    379:      -v var     Print make(1)'s idea of the value of var.  Does not build any
                    380:                 targets.
                    382:      var=value  Set the variable var to value, overriding any setting speci-
                    383:                 fied by the process environment, the MAKECONF configuration
                    384:                 file, or the system Makefile segments.
                    386:    "make" targets
                    387:      These default targets may be built by running make(1) in any subtree of
                    388:      the NetBSD source code.  It is recommended that none of these be used
                    389:      from the top level Makefile; as a specific exception, ``make obj'' and
                    390:      ``make cleandir'' are useful in that context.
                    392:      all        Build programs, libraries, and preformatted documentation.
                    394:      clean      Remove program and library object code files.
1.44      lukem     396:      cleandir   Same as clean, but also remove preformatted documentation,
                    397:                 dependency files generated by ``make depend'', and any other
1.1       tv        398:                 files known to be created at build time.  ``make distclean''
                    399:                 may be used as a synonym, for familiarity with a similar well-
                    400:                 known convention.
1.44      lukem     402:      depend     Create dependency files (.depend) containing more detailed
                    403:                 information about the dependencies of source code on header
1.1       tv        404:                 files.  Allows programs to be recompiled automatically when a
                    405:                 dependency changes.
                    407:      dependall  Does a ``make depend'' immediately followed by a ``make all''.
1.10      sommerfe  408:                 This improves cache locality of the build since both passes
                    409:                 read the source files in their entirety.
1.1       tv        410:
1.44      lukem     411:      includes   Build and install system header files.  Typically needed
                    412:                 before any system libraries or programs can be built.
1.1       tv        413:
                    414:      install    Install programs, libraries, and documentation into DESTDIR.
1.27      lukem     415:                 Few files will be installed to DESTDIR/dev, DESTDIR/etc,
                    416:                 DESTDIR/root or DESTDIR/var in order to prevent user supplied
                    417:                 configuration data from being overwritten.
1.1       tv        418:
                    419:      lint       Run lint(1) against the C source code, where appropriate, and
                    420:                 generate system-installed lint libraries.
                    422:      obj        Create object directories to be used for built files, instead
                    423:                 of building directly in the source tree.
                    425:      tags       Create ctags(1) searchable function lists usable by the ex(1)
                    426:                 and vi(1) text editors.
                    428:    "make" targets for the top level
                    429:      Additional make(1) targets are usable specifically from the top source
                    430:      level to facilitate building the entire NetBSD source tree.
1.20      lukem     432:      build         Build the entire NetBSD system.  This orders portions of
                    433:                    the source tree such that prerequisites will be built in
                    434:                    the proper order.
                    436:      distribution  Do a ``make build'', and then install a full distribution
1.27      lukem     437:                    into DESTDIR, including files in DESTDIR/dev, DESTDIR/etc,
                    438:                    DESTDIR/root and DESTDIR/var.
1.20      lukem     439:
                    440:      buildworld    As per ``make distribution'', except that it ensures that
                    441:                    DESTDIR is not the root directory.
                    443:      installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR
                    444:                    (which defaults to the root directory).  Ensures that
                    445:                    INSTALLWORLDDIR is the not root directory if cross compil-
                    446:                    ing.
                    448:                    Note: It is highly recommended that you upgrade your kernel
                    449:                    and reboot before performing this operation.
1.25      lukem     451:      sets          Create distribution sets from DESTDIR into
                    452:                    RELEASEDIR/MACHINE/binary/sets.  Should be run after ``make
                    453:                    distribution'' (as ``make build'' does not install all of
                    454:                    the required files).
1.31      lukem     456:      sourcesets    Create source sets of the source tree into
                    457:                    RELEASEDIR/source/sets.
1.44      lukem     459:      release       Do a ``make distribution'', build kernels, distribution
                    460:                    media, and install sets (this as per ``make sets''), and
                    461:                    then package the system into a standard release layout as
                    462:                    described by release(7).  This requires that RELEASEDIR be
1.25      lukem     463:                    set (see above).
1.1       tv        464:
                    465:      regression-tests
1.20      lukem     466:                    Can only be run after building the regression tests in the
                    467:                    directory ``regress''.  Runs the compiled regression tests
                    468:                    on the local host.
1.1       tv        469:
                    470:    The "build.sh" script
                    471:      This script file is a Bourne shell script designed to build the entire
                    472:      NetBSD system on any host with a Bourne shell in /bin/sh, including many
                    473:      that are not POSIX compliant.  Note that if a host system's /bin/sh is
                    474:      unusually old and broken, the Korn Shell (/bin/ksh), if available, may be
                    475:      a usable alternative.
                    477:      All cross-compile builds, and most native builds, of the entire system
                    478:      should make use of build.sh rather than just running ``make''.  This way,
                    479:      the make(1) program will be bootstrapped properly, in case the host sys-
                    480:      tem has an older or incompatible ``make'' program.
                    482:      When compiling the entire system via build.sh, many make(1) variables are
                    483:      set for you in order to help encapsulate the build process.  In the list
                    484:      of options below, variables that are automatically set by build.sh are
                    485:      noted where applicable.
1.22      lukem     487:      The following operations are supported by build.sh:
1.44      lukem     489:      build         Build the system as per ``make build''.  This option
                    490:                    implies the obj and tools operations.
1.22      lukem     491:
                    492:      distribution  Build a full distribution as per ``make distribution''.
                    493:                    This option implies the build operation.
                    495:      release       Build a full release as per ``make release''.  This option
                    496:                    implies the distribution operation.
1.23      lukem     498:      makewrapper   Create the nbmake-MACHINE wrapper.  This operation is auto-
                    499:                    matically performed for any of the other operations.
1.22      lukem     501:      obj           Perform ``make obj''.
                    503:      tools         Build and install the host tools from src/tools.
1.35      lukem     505:      install=idir  Install the contents of DESTDIR to idir, using ``make
                    506:                    installworld''.
1.22      lukem     508:      kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                    509:                    configuration file suitable for use by config(8).  If kconf
                    510:                    does not contain any `/' characters, the configuration file
                    511:                    is expected to be found in the KERNCONFDIR directory, which
                    512:                    is typically sys/arch/MACHINE/conf.  The new kernel will be
                    513:                    built in a subdirectory of KERNOBJDIR, which is typically
                    514:                    sys/arch/MACHINE/compile or an associated object directory.
                    515:                    In order to ensure that the kernel is built using up-to-
                    516:                    date tools, it is strongly recommended that the tools be
                    517:                    rebuilt (using the tools operation).
1.35      lukem     519:      releasekernel=kconf
                    520:                    Install a gzip(1)ed copy of the kernel built by
                    521:                    kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually
1.44      lukem     522:                    as netbsd-kconf.gz, although the ``netbsd'' prefix is
                    523:                    determined from the ``config'' directives in kconf.
1.24      lukem     524:
                    525:      sets          Perform ``make sets''.
1.31      lukem     526:
                    527:      sourcesets    Perform ``make sourcesets''.
1.22      lukem     528:
                    529:      The following command line options alter the behaviour of the above oper-
                    530:      ations: The following command line options alter the behaviour of the
                    531:      build.sh operations described above:
1.1       tv        532:
                    533:      -a arch   Set the value of MACHINE_ARCH to arch.
1.9       thorpej   534:
                    535:      -B buildid
                    536:                Set the value of BUILDID to buildid.  This will also append the
                    537:                build idenfitier to the name of the ``make'' wrapper script so
1.37      lukem     538:                that the resulting name is of the form
                    539:                ``nbmake-MACHINE-BUILDID''.
1.1       tv        540:
1.18      lukem     541:      -D dest   Set the value of DESTDIR to dest.
1.23      lukem     543:      -E        Set `expert' mode.  This overrides various sanity checks, and
                    544:                allows: DESTDIR does not have to be set to a non-root path for
1.38      lukem     545:                builds, and MKUNPRIVED=yes does not have to be set when build-
                    546:                ing as a non-root user.
1.23      lukem     547:
                    548:                Note: It is highly recommended that you know what you are doing
                    549:                when you use this option.
1.19      lukem     550:
1.10      sommerfe  551:      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have
                    552:                explicit dependancies as necessary to enforce build ordering.
                    553:                If you see build failures with -j, please save complete build
                    554:                logs so the failures can be analyzed.
1.1       tv        555:
1.40      lukem     556:      -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.
1.18      lukem     557:
1.1       tv        558:      -m mach   Set the value of MACHINE to mach.  This will also override any
                    559:                value of MACHINE_ARCH in the process environment with a value
1.33      lukem     560:                deduced from mach, unless -a is specified, or mach is a special
                    561:                case listed below.  All cross builds require -m, but if unset
                    562:                on a NetBSD host, the host's value of MACHINE will be detected
                    563:                and used automatically.
                    565:                Some machines support multiple values for MACHINE_ARCH.  For a
                    566:                given value of mach, the following MACHINE and MACHINE_ARCH
                    567:                values will result:
                    569:                      mach          MACHINE    MACHINE_ARCH
                    570:                      evbmips       evbmips    (not set)
                    571:                      evbmips-eb    evbmips    mipseb
                    572:                      evbmips-el    evbmips    mipsel
                    573:                      evbsh3        evbsh3     (not set)
                    574:                      evbsh3-eb     evbsh3     sh3eb
                    575:                      evbsh3-el     evbsh3     sh3el
                    576:                      sbmips        sbmips     (not set)
                    577:                      sbmips-eb     sbmips     mipseb
                    578:                      sbmips-el     sbmips     mipsel
1.1       tv        579:
1.45    ! lukem     580:      -N noiselevel
        !           581:                Set the ``noisyness'' level of the build Supported values of
        !           582:                noiselevel are:
        !           583:
        !           584:                0    Quiet build.
        !           585:
        !           586:                1    Operations are described, command lines are suppressed.
        !           587:
        !           588:                2    Noisy build.  This is the default.
        !           589:
1.1       tv        590:      -n        Show the commands that would be executed by build.sh, but do
                    591:                not make any changes.  This is similar in concept to ``make
                    592:                -n''.
1.18      lukem     594:      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                    595:                place the built object files under obj.  For instance, a set-
                    596:                ting of /usr/obj will place build-time files under
1.40      lukem     597:                /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and so forth.
                    598:                Unsets MAKEOBJDIRPREFIX.
1.18      lukem     599:
1.34      lukem     600:      -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be
                    601:                automatically set to ``yes'' (which is opposite to the default
                    602:                behaviour).
1.1       tv        603:
1.22      lukem     604:      -R rel    Set the value of RELEASEDIR to rel.
1.18      lukem     605:
1.1       tv        606:      -r        Remove the contents of DESTDIR and TOOLDIR before building
                    607:                (provides a clean starting point).  This will skip deleting
                    608:                DESTDIR if building on a native system to the root directory.
1.18      lukem     610:      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap
                    611:                ``make'' will only be rebuilt as needed (when the source files
                    612:                for make(1) change).
1.38      lukem     614:      -U        Set MKUNPRIVED=yes.
1.18      lukem     615:
1.38      lukem     616:      -u        Set MKUPDATE=yes.
1.1       tv        617:
1.21      lukem     618:      -V var=[value]
1.40      lukem     619:                Set the environment variable var to an optional value.  This is
                    620:                propagated to the nbmake wrapper.
1.21      lukem     621:
1.1       tv        622:      -w wrapper
                    623:                Create the nbmake wrapper script (see below) in a custom loca-
                    624:                tion, specified by wrapper.  This allows, for instance, to
                    625:                place the wrapper in PATH automatically.  Note that wrapper is
                    626:                the full name of the file, not just a directory name.
1.40      lukem     628:      -Z var    Unset ("zap") the environment variable var.  This is propagated
                    629:                to the nbmake wrapper.
1.1       tv        631:    The "nbmake-MACHINE" wrapper script
                    632:      If using the build.sh script to build NetBSD, a nbmake-MACHINE script
                    633:      will be created in TOOLDIR/bin upon the first build to assist in building
                    634:      subtrees on a cross-compile host.
                    636:      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
                    637:      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-
                    638:      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.
1.40      lukem     639:      build.sh will also set variables specified with -V, and unset variables
                    640:      specified with -Z.
1.1       tv        642:      This script can be symlinked into a directory listed in PATH, or called
                    643:      with an absolute path.
1.16      lukem     645: EXAMPLES
1.44      lukem     646:      1.   % ./build.sh tools kernel=GENERIC
1.28      lukem     647:
                    648:           Build a new toolchain, and use the new toolchain to configure and
                    649:           build a new GENERIC kernel.
1.44      lukem     651:      2.   % ./build.sh -U distribution
1.28      lukem     652:
1.30      lukem     653:           Using unprivileged mode, build a complete distribution to a DESTDIR
                    654:           directory that build.sh selects (and will display).
1.28      lukem     655:
1.43      martti    656:      3.   # ./build.sh -U install=/
1.28      lukem     657:
1.29      lukem     658:           As root, install to / the distribution that was built by example 2.
                    659:           Even though this is run as root, -U is required so that the permis-
1.30      lukem     660:           sions stored in DESTDIR/METALOG are correctly applied to the files
                    661:           as they're copied to /.
1.28      lukem     662:
1.44      lukem     663:      4.   % ./build.sh -U -u release
1.28      lukem     664:
1.30      lukem     665:           Using unprivileged mode, build a complete release to DESTDIR and
                    666:           RELEASEDIR directories that build.sh selects (and will display).
1.38      lukem     667:           MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that
                    668:           if this is run after example 2, it doesn't need to redo that portion
                    669:           of the release build.
1.16      lukem     670:
1.10      sommerfe  671: OBSOLETE VARIABLES
1.15      lukem     672:      NBUILDJOBS  Use the make(1) option -j, instead.
                    674:      USE_NEW_TOOLCHAIN
                    675:                  The new toolchain is now the default.  To disable, use
                    676:                  TOOLCHAIN_MISSING=yes.
1.10      sommerfe  677:
1.1       tv        678: SEE ALSO
                    679:      make(1), hier(7), release(7)
                    681: HISTORY
1.15      lukem     682:      The build.sh based build scheme was introduced for NetBSD 1.6 as
                    683:      USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
1.1       tv        684:
                    685: BUGS
1.15      lukem     686:      A few platforms are not yet using this build system.
1.1       tv        687:
1.45    ! lukem     688: NetBSD                         October 25, 2003                         NetBSD

CVSweb <webmaster@jp.NetBSD.org>