[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Annotation of src/BUILDING, Revision 1.19

1.1       tv          1: BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)
                      2:
                      3: NAME
                      4:      BUILDING - Procedure for building NetBSD from source code.
                      5:
                      6: STATUS
                      7:      This document is a work-in-progress.  As such, the information described
                      8:      here may not match the reality of the build system as of this writing.
                      9:      Once this document is completely in sync with reality, this paragraph
                     10:      will be removed.
                     11:
                     12:      Discrepancies between this documentation and the current reality of im-
                     13:      plementation are noted specially, as with the note below:
                     14:
                     15:      Note: This document applies only to platforms which use the new toolchain
1.15      lukem      16:      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.
1.5       tv         17:      Platforms which have not yet been switched to the new toolchain should
                     18:      continue building traditionally, using the notes specified in the file
                     19:      UPDATING.
1.1       tv         20:
                     21: REQUIREMENTS
                     22:      NetBSD is designed to be buildable on most POSIX-compliant host systems.
                     23:      The basic build procedure is the same whether compiling natively (on the
                     24:      same NetBSD architecture) or cross compiling (on another architecture or
                     25:      OS).
                     26:
                     27:      This source tree contains a special subtree, ``tools'', which uses the
                     28:      host system to create a build toolchain for the target architecture.  The
                     29:      host system must have at least C and C++ compilers in order to create the
                     30:      toolchain (make is not required); all other tools are created as part of
                     31:      the NetBSD build process.
                     32:
                     33:            Note: A couple host toolchain components are not yet available in
                     34:            the tools directory.  Also, some tools use non-POSIX, non-ANSI C
                     35:            extensions and need to be standardized.  As a result, cross-compil-
                     36:            ing from systems other than NetBSD is not currently supported.
                     37:
                     38: FILES
                     39:    Source tree layout
                     40:
1.17      wiz        41:      doc/BUILDING.mdoc
                     42:                     This document (in -mdoc troff format; the original copy).
1.1       tv         43:
1.2       wiz        44:      BUILDING       This document (in plaintext).
1.1       tv         45:
                     46:      Makefile       The main Makefile for NetBSD; should only be run for na-
                     47:                     tive builds with an appropriately up-to-date version of
                     48:                     NetBSD make(1).  (For building from out-of-date systems or
                     49:                     on a non-native host, see the build.sh shell script.)
                     50:
                     51:      UPDATING       Special notes for updating from an earlier revision of
                     52:                     NetBSD.  It is important to read this file before every
                     53:                     build of an updated source tree.
                     54:
                     55:      build.sh       Bourne-compatible shell script used for building the host
                     56:                     build tools and the NetBSD system from scratch.  Can be
                     57:                     used for both native and cross builds, and should be used
                     58:                     instead of make(1) for any source tree that is updated and
                     59:                     recompiled regularly.
                     60:
                     61:      crypto/dist/, dist/, gnu/dist/
                     62:                     Sources imported verbatim from third parties, without man-
                     63:                     gling the existing build structure.  Other source trees in
                     64:                     bin through usr.sbin use the NetBSD make(1) ``reachover''
                     65:                     Makefile semantics when building these programs for a na-
                     66:                     tive host.
                     67:
                     68:      distrib/, etc/
                     69:                     Sources for items used when making a full release snap-
                     70:                     shot, such as files installed in /etc on the destination
                     71:                     system, boot media, and release notes.
                     72:
                     73:      regress/       Regression test harness.  Can be cross-compiled, but only
                     74:                     run natively.
                     75:
                     76:      sys/           NetBSD kernel sources.
                     77:
                     78:      tools/         ``Reachover'' build structure for the host build tools.
                     79:                     This has a special method of determining out-of-date sta-
                     80:                     tus.
                     81:
                     82:      bin/ ... usr.sbin/
                     83:                     Sources to the NetBSD userland (non-kernel) programs.  If
                     84:                     any of these directories are missing, they will be skipped
                     85:                     during the build.
                     86:
                     87:    Build tree layout
                     88:      The NetBSD build tree is described in hier(7), and the release layout is
                     89:      described in release(7).
                     90:
                     91: CONFIGURATION
1.8       lukem      92:    Environment variables
                     93:      Several environment variables control the behaviour of NetBSD builds.
                     94:
                     95:      MACHINE           Machine type.
                     96:
                     97:      MACHINE_ARCH      Machine architecture.
                     98:
                     99:      MAKE              Path name to invoke make(1) as.
                    100:
                    101:      MAKEFLAGS         Flags to invoke make(1) with.
                    102:
                    103:      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-
                    104:                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.
                    105:                        MAKEOBJDIR can only be provided in the environment.
                    106:
                    107:      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If
                    108:                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used
                    109:                        as the .OBJDIR for the current directory.  The current
                    110:                        directory may be read only.  MAKEOBJDIRPREFIX can only
                    111:                        be provided in the environment.
                    112:
1.1       tv        113:    "make" variables
                    114:      Several variables control the behavior of NetBSD builds.  Unless other-
                    115:      wise specified, these variables may be set in either the process environ-
                    116:      ment or the make(1) configuration file specified by MAKECONF.
                    117:
1.9       thorpej   118:      BUILDID     Identifier for the build.  The identifier will be appended to
                    119:                  object directory names, and can be consulted in the make(1)
                    120:                  configuration file in order to set additional build parame-
                    121:                  ters, such as compiler flags.
                    122:
1.1       tv        123:      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-
                    124:                  cial options are passed to the compilation tools to prevent
                    125:                  their default use of the host system's /usr/include,
                    126:                  /usr/lib, and so forth.  This pathname should not end with a
                    127:                  slash (/) character (for installation into the system's root
1.7       lukem     128:                  directory, set DESTDIR to an empty string).  The directory
                    129:                  must reside on a file system which supports long file names
                    130:                  and hard links.
1.1       tv        131:
                    132:                  Default: Empty string if USETOOLS is ``yes''; unset other-
                    133:                  wise.
                    134:
                    135:      MAKECONF    The name of the make(1) configuration file.  Only settable in
                    136:                  the process environment.
                    137:
                    138:                  Default: ``/etc/mk.conf''
                    139:
                    140:      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-
                    141:                  matted plaintext manual pages will be created during a build.
                    142:
                    143:                  Default: ``yes''
                    144:
                    145:      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-
                    146:                  graphic code will be included in a build; provided for the
                    147:                  benefit of countries that do not allow strong cryptography.
                    148:                  Will not affect use of the standard low-security password en-
                    149:                  cryption system, crypt(3).
                    150:
                    151:                  Default: ``yes''
                    152:
                    153:      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system
                    154:                  documentation destined for /usr/share/doc will be installed
                    155:                  during a build.
                    156:
                    157:                  Default: ``yes''
                    158:
1.4       tv        159:      MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for
                    160:                  programs intended to be run on the compile host, the name,
                    161:                  release, and architecture of the host operating system will
                    162:                  be suffixed to the name of the object directory created by
                    163:                  ``make obj''.  (This allows multiple host systems to compile
                    164:                  NetBSD for a single target.)  If set to ``no'', then programs
                    165:                  built to be run on the compile host will use the same object
                    166:                  directory names as programs built to be run on the target.
                    167:
                    168:                  Default: ``no''
                    169:
1.1       tv        170:      MKINFO      Can be set to ``yes'' or ``no''.  Indicates whether GNU Info
                    171:                  files, used for the documentation for most of the compilation
                    172:                  tools, will be created and installed during a build.
                    173:
                    174:                  Default: ``yes''
                    175:
                    176:      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)
                    177:                  will be run against portions of the NetBSD source code during
                    178:                  the build, and whether lint libraries will be installed into
                    179:                  /usr/libdata/lint.
                    180:
                    181:                  Default: ``yes''
                    182:
                    183:      MKMAN       Can be set to ``yes'' or ``no''.  Indicates whether manual
                    184:                  pages will be installed during a build.
                    185:
                    186:                  Default: ``yes''
                    187:
                    188:      MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native
                    189:                  Language System locale zone files will be compiled and in-
                    190:                  stalled during a build.
                    191:
                    192:                  Default: ``yes''
                    193:
                    194:      MKOBJ       Can be set to ``yes'' or ``no''.  Indicates whether object
                    195:                  directories will be created when running ``make obj''.  If
                    196:                  set to ``no'', then all built files will be located inside
                    197:                  the regular source tree.
                    198:
                    199:                  Default: ``yes''
                    200:
                    201:      MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared
                    202:                  objects and libraries will be created and installed during a
                    203:                  build.  If set to ``no'', the entire built system will be
                    204:                  statically linked.
                    205:
                    206:                  Default: Platform dependent.  As of this writing, all plat-
                    207:                  forms except sh3 default to ``yes''.
                    208:
                    209:      MKPICINSTALL
                    210:                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)
                    211:                  format libraries (lib*_pic.a), used to generate shared li-
                    212:                  braries, are installed during a build.
                    213:
                    214:                  Default: ``yes''
                    215:
                    216:      MKPROFILE   Can be set to ``yes'' or ``no''.  Indicates whether profiled
                    217:                  libraries (lib*_p.a) will be built and installed during a
                    218:                  build.
                    219:
                    220:                  Default: ``yes''; however, some platforms turn off MKPROFILE
                    221:                  by default at times due to toolchain problems with profiled
                    222:                  code.
                    223:
                    224:      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files
                    225:                  destined to reside in /usr/share will be built and installed
                    226:                  during a build.  If set to ``no'', then all of MKCATPAGES,
                    227:                  MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon-
                    228:                  ditionally.
                    229:
                    230:                  Default: ``yes''
                    231:
                    232:      TOOLDIR     Directory to hold the host tools, once built.  This directory
                    233:                  should be unique to a given host system and NetBSD source
                    234:                  tree.  (However, multiple targets may share the same TOOLDIR;
                    235:                  the target-dependent files have unique names.)  If unset, a
                    236:                  default based on the uname(1) information of the host plat-
                    237:                  form will be created in the .OBJDIR of src/tools.
                    238:
                    239:                  Default: Unset.
                    240:
1.7       lukem     241:      UNPRIVED    If set, then an unprivileged install will occur.  The user,
                    242:                  group, permissions, and file flags, will not be set on the
                    243:                  installed item; instead the information will be appended to a
1.11      lukem     244:                  file called METALOG in DESTDIR.  The contents of METALOG is
                    245:                  used during the generation of the distribution tar files to
                    246:                  ensure that the appropriate file ownership is stored.
1.7       lukem     247:
                    248:                  Default: Unset.
                    249:
1.1       tv        250:      UPDATE      If set, then all install operations intended to write to
                    251:                  DESTDIR will compare file timestamps before installing, and
                    252:                  skip the install phase if the destination files are up-to-
                    253:                  date.  This also has implications on full builds (see next
                    254:                  subsection).
                    255:
                    256:                  Default: Unset.
                    257:
                    258:      USETOOLS    Indicates whether the tools specified by TOOLDIR should be
                    259:                  used as part of a build in progress.  Must be set to ``yes''
                    260:                  if cross-compiling.
                    261:
                    262:                  yes    Use the tools from TOOLDIR.
                    263:
                    264:                  no     Do not use the tools from TOOLDIR, but refuse to build
                    265:                         native compilation tool components that are version-
                    266:                         specific for that tool.
                    267:
                    268:                  never  Do not use the tools from TOOLDIR, even when building
                    269:                         native tool components.  This is similar to the tradi-
                    270:                         tional NetBSD build method, but does not verify that
                    271:                         the compilation tools in use are up-to-date enough in
                    272:                         order to build the tree successfully.  This may cause
                    273:                         build or runtime problems when building the whole
                    274:                         NetBSD source tree.
                    275:
                    276:                  Default: ``yes'' if building all or part of a whole NetBSD
                    277:                  source tree (detected automatically); ``no'' otherwise (to
                    278:                  preserve traditional semantics of the <bsd.*.mk> make(1) in-
                    279:                  clude files).
                    280:
                    281:    "make" variables for full builds
1.7       lukem     282:      These variables only affect the top level ``Makefile'' and do not affect
                    283:      manually building subtrees of the NetBSD source code.
1.1       tv        284:
                    285:      MKOBJDIRS      Can be set to ``yes'' or ``no''.  Indicates whether object
                    286:                     directories will be created automatically (via a ``make
                    287:                     obj'' pass) at the start of a build.
                    288:
                    289:                     Default: ``yes''
                    290:
1.10      sommerfe  291:      NBUILDJOBS     Now obsolete.  Use the make(1) option -j, instead (see be-
                    292:                     low)
1.1       tv        293:
                    294:                     Default: Unset.
                    295:
                    296:      NOCLEANDIR     If set, avoids the ``make cleandir'' phase of a full
                    297:                     build.  This has the effect of allowing only changed files
                    298:                     in a source tree to be recompiled.  This can speed up
                    299:                     builds when updating only a few files in the tree.
                    300:
                    301:                     Default: Unset.
                    302:
                    303:      NODISTRIBDIRS  If set, avoids the ``make distrib-dirs'' phase of a full
                    304:                     build.  This skips running mtree(8) on DESTDIR, useful on
                    305:                     systems where building as an unprivileged user, or where
                    306:                     it is known that the system-wide mtree files have not
                    307:                     changed.
                    308:
                    309:                     Default: Unset.
                    310:
                    311:      NOINCLUDES     If set, avoids the ``make includes'' phase of a full
                    312:                     build.  This has the effect of preventing make(1) from
                    313:                     thinking that some programs are out-of-date simply because
                    314:                     the system include files have changed.  However, this op-
                    315:                     tion should not be used when updating the entire NetBSD
                    316:                     source tree arbitrarily; it is suggested to use UPDATE in
                    317:                     that case.
                    318:
                    319:                     Default: Unset.
                    320:
                    321:      RELEASEDIR     If set, specifies the directory to which a release(7) lay-
                    322:                     out will be written at the end of a ``make release''.
                    323:
                    324:                     Default: Unset.
                    325:
                    326:      UPDATE         If set, then in addition to the effects described for UP-
                    327:                     DATE above, this implies the effects of NOCLEANDIR.
                    328:
                    329: BUILDING
                    330:    "make" command line options
                    331:      This is only a summary of options available to make(1); only the options
                    332:      used most frequently with NetBSD builds are listed here.
                    333:
1.10      sommerfe  334:      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
                    335:                 use .WAIT or have explicit dependancies as necessary to en-
                    336:                 force build ordering.  If you see build failures with -j,
                    337:                 please save complete build logs so the failures can be ana-
                    338:                 lyzed.
                    339:
1.1       tv        340:      -m dir     Specify the default directory for searching for system Make-
                    341:                 file segments, mainly the <bsd.*.mk> files.  When building any
                    342:                 full NetBSD source tree, this should be set to the
                    343:                 ``share/mk'' directory in the source tree.  (This is set auto-
                    344:                 matically when building from the top level.)
                    345:
                    346:      -n         Display the commands that would have been executed, but do not
                    347:                 actually execute them.  This will still cause recursion to
                    348:                 take place.
                    349:
                    350:      -v var     Print make(1)'s idea of the value of var.  Does not build any
                    351:                 targets.
                    352:
                    353:      var=value  Set the variable var to value, overriding any setting speci-
                    354:                 fied by the process environment, the MAKECONF configuration
                    355:                 file, or the system Makefile segments.
                    356:
                    357:    "make" targets
                    358:      These default targets may be built by running make(1) in any subtree of
                    359:      the NetBSD source code.  It is recommended that none of these be used
                    360:      from the top level Makefile; as a specific exception, ``make obj'' and
                    361:      ``make cleandir'' are useful in that context.
                    362:
                    363:      all        Build programs, libraries, and preformatted documentation.
                    364:
                    365:      clean      Remove program and library object code files.
                    366:
                    367:      cleandir   Same as clean, but also remove preformatted documentation, de-
                    368:                 pendency files generated by ``make depend'', and any other
                    369:                 files known to be created at build time.  ``make distclean''
                    370:                 may be used as a synonym, for familiarity with a similar well-
                    371:                 known convention.
                    372:
                    373:      depend     Create dependency files (.depend) containing more detailed in-
                    374:                 formation about the dependencies of source code on header
                    375:                 files.  Allows programs to be recompiled automatically when a
                    376:                 dependency changes.
                    377:
                    378:      dependall  Does a ``make depend'' immediately followed by a ``make all''.
1.10      sommerfe  379:                 This improves cache locality of the build since both passes
                    380:                 read the source files in their entirety.
1.1       tv        381:
                    382:      includes   Build and install system header files.  Typically needed be-
                    383:                 fore any system libraries or programs can be built.
                    384:
                    385:      install    Install programs, libraries, and documentation into DESTDIR.
1.14      fredb     386:                 Few files will be installed to /dev, /etc, /root or /var in
                    387:                 order to prevent user supplied configuration data from being
                    388:                 overwritten.
1.1       tv        389:
                    390:      lint       Run lint(1) against the C source code, where appropriate, and
                    391:                 generate system-installed lint libraries.
                    392:
                    393:      obj        Create object directories to be used for built files, instead
                    394:                 of building directly in the source tree.
                    395:
                    396:      tags       Create ctags(1) searchable function lists usable by the ex(1)
                    397:                 and vi(1) text editors.
                    398:
                    399:    "make" targets for the top level
                    400:      Additional make(1) targets are usable specifically from the top source
                    401:      level to facilitate building the entire NetBSD source tree.
                    402:
                    403:      build      Build the entire NetBSD system.  This orders portions of the
                    404:                 source tree such that prerequisites will be built in the prop-
                    405:                 er order.
                    406:
                    407:      release    Do a ``make build'', then package the system into a standard
                    408:                 release layout as described by release(7).  This requires that
                    409:                 RELEASEDIR be set (see above).
                    410:
                    411:      regression-tests
                    412:                 Can only be run after building the regression tests in the di-
                    413:                 rectory ``regress''.  Runs the compiled regression tests on
                    414:                 the local host.
                    415:
                    416:    The "build.sh" script
                    417:      This script file is a Bourne shell script designed to build the entire
                    418:      NetBSD system on any host with a Bourne shell in /bin/sh, including many
                    419:      that are not POSIX compliant.  Note that if a host system's /bin/sh is
                    420:      unusually old and broken, the Korn Shell (/bin/ksh), if available, may be
                    421:      a usable alternative.
                    422:
                    423:      All cross-compile builds, and most native builds, of the entire system
                    424:      should make use of build.sh rather than just running ``make''.  This way,
                    425:      the make(1) program will be bootstrapped properly, in case the host sys-
                    426:      tem has an older or incompatible ``make'' program.
                    427:
                    428:      When compiling the entire system via build.sh, many make(1) variables are
                    429:      set for you in order to help encapsulate the build process.  In the list
                    430:      of options below, variables that are automatically set by build.sh are
                    431:      noted where applicable.
                    432:
                    433:      The following are available command line options that may be supplied to
                    434:      build.sh:
                    435:
                    436:      -a arch   Set the value of MACHINE_ARCH to arch.
1.9       thorpej   437:
                    438:      -B buildid
                    439:                Set the value of BUILDID to buildid.  This will also append the
                    440:                build idenfitier to the name of the ``make'' wrapper script so
                    441:                that the resulting name is of the form ``nbmake-MACHINE-
                    442:                BUILDID''.
1.1       tv        443:
                    444:      -b        Bootstrap ``make'' and create a nbmake-MACHINE script (see be-
                    445:                low).
                    446:
1.18      lukem     447:      -D dest   Set the value of DESTDIR to dest.
                    448:
1.14      fredb     449:      -d        Build a full distribution.  This differs from a default build
                    450:                in that files will also be installed to /dev, /etc, /root and
                    451:                /var.  Note this does not build a ``release''; no release sets
                    452:                are placed in ${RELEASEDIR}.  -d is implied by -R.
1.6       thorpej   453:
1.19    ! lukem     454:      -E        Set `expert' mode; DESTDIR does not have to be set to a non-
        !           455:                root path for builds when this is set.
        !           456:
1.10      sommerfe  457:      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have
                    458:                explicit dependancies as necessary to enforce build ordering.
                    459:                If you see build failures with -j, please save complete build
                    460:                logs so the failures can be analyzed.
1.1       tv        461:
1.16      lukem     462:      -k kernel
                    463:                Build a new kernel.  The kernel argument is the name of a con-
                    464:                figuration file suitable for use by config(8).  If kernel does
                    465:                not contain any `/' characters, the configuration file is ex-
                    466:                pected to be found in the KERNCONFDIR directory, which is typi-
                    467:                cally sys/arch/MACHINE/conf.  The new kernel will be built in a
                    468:                subdirectory of KERNOBJDIR, which is typically
                    469:                sys/arch/MACHINE/compile or an associated object directory.  In
                    470:                order to ensure that the kernel is built using up-to-date
                    471:                tools, it is strongly recommended that the tools be rebuilt
                    472:                (using the -t option) in a separate invocation of build.sh pri-
                    473:                or to using the -k option, or that the -t and -k options be
                    474:                used together in a single invocation of build.sh.
                    475:
1.18      lukem     476:      -M obj    Set MAKEOBJDIRPREFIX to obj.
                    477:
1.1       tv        478:      -m mach   Set the value of MACHINE to mach.  This will also override any
                    479:                value of MACHINE_ARCH in the process environment with a value
                    480:                deduced from mach, unless -a is specified.  All cross builds
                    481:                require -m, but if unset on a NetBSD host, the host's value of
                    482:                MACHINE will be detected and used automatically.
                    483:
                    484:      -n        Show the commands that would be executed by build.sh, but do
                    485:                not make any changes.  This is similar in concept to ``make
                    486:                -n''.
                    487:
1.18      lukem     488:      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                    489:                place the built object files under obj.  For instance, a set-
                    490:                ting of /usr/obj will place build-time files under
                    491:                /usr/obj/bin, /usr/obj/lib, and so forth.
                    492:
1.1       tv        493:      -o        Set the value of MKOBJDIRS to ``no''.
                    494:
1.18      lukem     495:      -R rel    Set the value of RELEASEDIR to rel.  Setting this option will
                    496:                cause build.sh to run ``make release'' instead of ``make
                    497:                build''.
                    498:
1.1       tv        499:      -r        Remove the contents of DESTDIR and TOOLDIR before building
                    500:                (provides a clean starting point).  This will skip deleting
                    501:                DESTDIR if building on a native system to the root directory.
                    502:
1.18      lukem     503:      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap
                    504:                ``make'' will only be rebuilt as needed (when the source files
                    505:                for make(1) change).
                    506:
1.1       tv        507:      -t        Build and install the host tools from src/tools only.  This op-
                    508:                tion implies -b.
                    509:
1.18      lukem     510:      -U        Set the UNPRIVED variable.
                    511:
1.1       tv        512:      -u        Set the UPDATE variable.
                    513:
                    514:      -w wrapper
                    515:                Create the nbmake wrapper script (see below) in a custom loca-
                    516:                tion, specified by wrapper.  This allows, for instance, to
                    517:                place the wrapper in PATH automatically.  Note that wrapper is
                    518:                the full name of the file, not just a directory name.
                    519:
                    520:    The "nbmake-MACHINE" wrapper script
                    521:      If using the build.sh script to build NetBSD, a nbmake-MACHINE script
                    522:      will be created in TOOLDIR/bin upon the first build to assist in building
                    523:      subtrees on a cross-compile host.
                    524:
                    525:      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
                    526:      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-
                    527:      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.
                    528:      This script can be symlinked into a directory listed in PATH, or called
                    529:      with an absolute path.
                    530:
1.16      lukem     531: EXAMPLES
                    532:      ./build.sh -t
                    533:                Build a new toolchain.
                    534:
                    535:      cd ${KERNCONFDIR} ; ${TOOLDIR}/bin/nbconfig GENERIC
                    536:                Use the new version of config(8) to prepare to build a new
                    537:                GENERIC kernel.
                    538:
                    539:      cd ${KERNOBJDIR}/GENERIC ; ${TOOLDIR}/bin/nbmake-${MACHINE} dependall
                    540:                Use the new toolchain to build a new GENERIC kernel.
                    541:
                    542:      ./build.sh -t -k GENERIC
                    543:                Build a new toolchain, and use the new toolchain to configure
                    544:                and build a new GENERIC kernel.
                    545:
                    546:      ./build.sh -U -d
                    547:                Using unprivileged mode, build a complete distribution in
                    548:                DESTDIR.
                    549:
                    550:      ./build.sh -U -R /some/dir/RELEASE
                    551:                Using unprivileged mode, build a complete release in the speci-
                    552:                fied release directory.
                    553:
1.10      sommerfe  554: OBSOLETE VARIABLES
1.15      lukem     555:      NBUILDJOBS  Use the make(1) option -j, instead.
                    556:
                    557:      USE_NEW_TOOLCHAIN
                    558:                  The new toolchain is now the default.  To disable, use
                    559:                  TOOLCHAIN_MISSING=yes.
1.10      sommerfe  560:
1.1       tv        561: SEE ALSO
                    562:      make(1), hier(7), release(7)
                    563:
                    564: HISTORY
1.15      lukem     565:      The build.sh based build scheme was introduced for NetBSD 1.6 as
                    566:      USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
1.1       tv        567:
                    568: BUGS
1.15      lukem     569:      A few platforms are not yet using this build system.
1.1       tv        570:
1.18      lukem     571: NetBSD                         December 8, 2002                              9

CVSweb <webmaster@jp.NetBSD.org>