Annotation of src/BUILDING, Revision 1.12
1.1 tv 1: BUILDING(8) NetBSD System Manager's Manual BUILDING(8)
2:
3: NAME
4: BUILDING - Procedure for building NetBSD from source code.
5:
6: STATUS
7: This document is a work-in-progress. As such, the information described
8: here may not match the reality of the build system as of this writing.
9: Once this document is completely in sync with reality, this paragraph
10: will be removed.
11:
12: Discrepancies between this documentation and the current reality of im-
13: plementation are noted specially, as with the note below:
14:
15: Note: This document applies only to platforms which use the new toolchain
1.5 tv 16: as indicated by the default setting of USE_NEW_TOOLCHAIN in <bsd.own.mk>.
17: Platforms which have not yet been switched to the new toolchain should
18: continue building traditionally, using the notes specified in the file
19: UPDATING.
1.1 tv 20:
21: REQUIREMENTS
22: NetBSD is designed to be buildable on most POSIX-compliant host systems.
23: The basic build procedure is the same whether compiling natively (on the
24: same NetBSD architecture) or cross compiling (on another architecture or
25: OS).
26:
27: This source tree contains a special subtree, ``tools'', which uses the
28: host system to create a build toolchain for the target architecture. The
29: host system must have at least C and C++ compilers in order to create the
30: toolchain (make is not required); all other tools are created as part of
31: the NetBSD build process.
32:
33: Note: A couple host toolchain components are not yet available in
34: the tools directory. Also, some tools use non-POSIX, non-ANSI C
35: extensions and need to be standardized. As a result, cross-compil-
36: ing from systems other than NetBSD is not currently supported.
37:
38: FILES
39: Source tree layout
40:
41: BUILDING.mdoc This document (in -mdoc troff format; the original copy).
42:
1.2 wiz 43: BUILDING This document (in plaintext).
1.1 tv 44:
45: Makefile The main Makefile for NetBSD; should only be run for na-
46: tive builds with an appropriately up-to-date version of
47: NetBSD make(1). (For building from out-of-date systems or
48: on a non-native host, see the build.sh shell script.)
49:
50: UPDATING Special notes for updating from an earlier revision of
51: NetBSD. It is important to read this file before every
52: build of an updated source tree.
53:
54: build.sh Bourne-compatible shell script used for building the host
55: build tools and the NetBSD system from scratch. Can be
56: used for both native and cross builds, and should be used
57: instead of make(1) for any source tree that is updated and
58: recompiled regularly.
59:
60: crypto/dist/, dist/, gnu/dist/
61: Sources imported verbatim from third parties, without man-
62: gling the existing build structure. Other source trees in
63: bin through usr.sbin use the NetBSD make(1) ``reachover''
64: Makefile semantics when building these programs for a na-
65: tive host.
66:
67: distrib/, etc/
68: Sources for items used when making a full release snap-
69: shot, such as files installed in /etc on the destination
70: system, boot media, and release notes.
71:
72: regress/ Regression test harness. Can be cross-compiled, but only
73: run natively.
74:
75: sys/ NetBSD kernel sources.
76:
77: tools/ ``Reachover'' build structure for the host build tools.
78: This has a special method of determining out-of-date sta-
79: tus.
80:
81: bin/ ... usr.sbin/
82: Sources to the NetBSD userland (non-kernel) programs. If
83: any of these directories are missing, they will be skipped
84: during the build.
85:
86: Build tree layout
87: The NetBSD build tree is described in hier(7), and the release layout is
88: described in release(7).
89:
90: CONFIGURATION
1.8 lukem 91: Environment variables
92: Several environment variables control the behaviour of NetBSD builds.
93:
94: MACHINE Machine type.
95:
96: MACHINE_ARCH Machine architecture.
97:
98: MAKE Path name to invoke make(1) as.
99:
100: MAKEFLAGS Flags to invoke make(1) with.
101:
102: MAKEOBJDIR Directory to use as the .OBJDIR for the current direc-
103: tory. Used only if MAKEOBJDIRPREFIX is not defined.
104: MAKEOBJDIR can only be provided in the environment.
105:
106: MAKEOBJDIRPREFIX Top level directory of the object directory tree. If
107: this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used
108: as the .OBJDIR for the current directory. The current
109: directory may be read only. MAKEOBJDIRPREFIX can only
110: be provided in the environment.
111:
1.1 tv 112: "make" variables
113: Several variables control the behavior of NetBSD builds. Unless other-
114: wise specified, these variables may be set in either the process environ-
115: ment or the make(1) configuration file specified by MAKECONF.
116:
1.9 thorpej 117: BUILDID Identifier for the build. The identifier will be appended to
118: object directory names, and can be consulted in the make(1)
119: configuration file in order to set additional build parame-
120: ters, such as compiler flags.
121:
1.1 tv 122: DESTDIR Directory to contain the built NetBSD system. If set, spe-
123: cial options are passed to the compilation tools to prevent
124: their default use of the host system's /usr/include,
125: /usr/lib, and so forth. This pathname should not end with a
126: slash (/) character (for installation into the system's root
1.7 lukem 127: directory, set DESTDIR to an empty string). The directory
128: must reside on a file system which supports long file names
129: and hard links.
1.1 tv 130:
131: Default: Empty string if USETOOLS is ``yes''; unset other-
132: wise.
133:
134: MAKECONF The name of the make(1) configuration file. Only settable in
135: the process environment.
136:
137: Default: ``/etc/mk.conf''
138:
139: MKCATPAGES Can be set to ``yes'' or ``no''. Indicates whether prefor-
140: matted plaintext manual pages will be created during a build.
141:
142: Default: ``yes''
143:
144: MKCRYPTO Can be set to ``yes'' or ``no''. Indicates whether crypto-
145: graphic code will be included in a build; provided for the
146: benefit of countries that do not allow strong cryptography.
147: Will not affect use of the standard low-security password en-
148: cryption system, crypt(3).
149:
150: Default: ``yes''
151:
152: MKDOC Can be set to ``yes'' or ``no''. Indicates whether system
153: documentation destined for /usr/share/doc will be installed
154: during a build.
155:
156: Default: ``yes''
157:
1.4 tv 158: MKHOSTOBJ Can be set to ``yes'' or ``no''. If set to ``yes'', then for
159: programs intended to be run on the compile host, the name,
160: release, and architecture of the host operating system will
161: be suffixed to the name of the object directory created by
162: ``make obj''. (This allows multiple host systems to compile
163: NetBSD for a single target.) If set to ``no'', then programs
164: built to be run on the compile host will use the same object
165: directory names as programs built to be run on the target.
166:
167: Default: ``no''
168:
1.1 tv 169: MKINFO Can be set to ``yes'' or ``no''. Indicates whether GNU Info
170: files, used for the documentation for most of the compilation
171: tools, will be created and installed during a build.
172:
173: Default: ``yes''
174:
175: MKLINT Can be set to ``yes'' or ``no''. Indicates whether lint(1)
176: will be run against portions of the NetBSD source code during
177: the build, and whether lint libraries will be installed into
178: /usr/libdata/lint.
179:
180: Default: ``yes''
181:
182: MKMAN Can be set to ``yes'' or ``no''. Indicates whether manual
183: pages will be installed during a build.
184:
185: Default: ``yes''
186:
187: MKNLS Can be set to ``yes'' or ``no''. Indicates whether Native
188: Language System locale zone files will be compiled and in-
189: stalled during a build.
190:
191: Default: ``yes''
192:
193: MKOBJ Can be set to ``yes'' or ``no''. Indicates whether object
194: directories will be created when running ``make obj''. If
195: set to ``no'', then all built files will be located inside
196: the regular source tree.
197:
198: Default: ``yes''
199:
200: MKPIC Can be set to ``yes'' or ``no''. Indicates whether shared
201: objects and libraries will be created and installed during a
202: build. If set to ``no'', the entire built system will be
203: statically linked.
204:
205: Default: Platform dependent. As of this writing, all plat-
206: forms except sh3 default to ``yes''.
207:
208: MKPICINSTALL
209: Can be set to ``yes'' or ``no''. Indicates whether the ar(1)
210: format libraries (lib*_pic.a), used to generate shared li-
211: braries, are installed during a build.
212:
213: Default: ``yes''
214:
215: MKPROFILE Can be set to ``yes'' or ``no''. Indicates whether profiled
216: libraries (lib*_p.a) will be built and installed during a
217: build.
218:
219: Default: ``yes''; however, some platforms turn off MKPROFILE
220: by default at times due to toolchain problems with profiled
221: code.
222:
223: MKSHARE Can be set to ``yes'' or ``no''. Indicates whether files
224: destined to reside in /usr/share will be built and installed
225: during a build. If set to ``no'', then all of MKCATPAGES,
226: MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon-
227: ditionally.
228:
229: Default: ``yes''
230:
231: TOOLDIR Directory to hold the host tools, once built. This directory
232: should be unique to a given host system and NetBSD source
233: tree. (However, multiple targets may share the same TOOLDIR;
234: the target-dependent files have unique names.) If unset, a
235: default based on the uname(1) information of the host plat-
236: form will be created in the .OBJDIR of src/tools.
237:
238: Default: Unset.
239:
1.7 lukem 240: UNPRIVED If set, then an unprivileged install will occur. The user,
241: group, permissions, and file flags, will not be set on the
242: installed item; instead the information will be appended to a
1.11 lukem 243: file called METALOG in DESTDIR. The contents of METALOG is
244: used during the generation of the distribution tar files to
245: ensure that the appropriate file ownership is stored.
1.7 lukem 246:
247: Default: Unset.
248:
1.1 tv 249: UPDATE If set, then all install operations intended to write to
250: DESTDIR will compare file timestamps before installing, and
251: skip the install phase if the destination files are up-to-
252: date. This also has implications on full builds (see next
253: subsection).
254:
255: Default: Unset.
256:
257: USETOOLS Indicates whether the tools specified by TOOLDIR should be
258: used as part of a build in progress. Must be set to ``yes''
259: if cross-compiling.
260:
261: yes Use the tools from TOOLDIR.
262:
263: no Do not use the tools from TOOLDIR, but refuse to build
264: native compilation tool components that are version-
265: specific for that tool.
266:
267: never Do not use the tools from TOOLDIR, even when building
268: native tool components. This is similar to the tradi-
269: tional NetBSD build method, but does not verify that
270: the compilation tools in use are up-to-date enough in
271: order to build the tree successfully. This may cause
272: build or runtime problems when building the whole
273: NetBSD source tree.
274:
275: Default: ``yes'' if building all or part of a whole NetBSD
276: source tree (detected automatically); ``no'' otherwise (to
277: preserve traditional semantics of the <bsd.*.mk> make(1) in-
278: clude files).
279:
280: "make" variables for full builds
1.7 lukem 281: These variables only affect the top level ``Makefile'' and do not affect
282: manually building subtrees of the NetBSD source code.
1.1 tv 283:
284: MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether object
285: directories will be created automatically (via a ``make
286: obj'' pass) at the start of a build.
287:
288: Default: ``yes''
289:
1.10 sommerfe 290: NBUILDJOBS Now obsolete. Use the make(1) option -j, instead (see be-
291: low)
1.1 tv 292:
293: Default: Unset.
294:
295: NOCLEANDIR If set, avoids the ``make cleandir'' phase of a full
296: build. This has the effect of allowing only changed files
297: in a source tree to be recompiled. This can speed up
298: builds when updating only a few files in the tree.
299:
300: Default: Unset.
301:
302: NODISTRIBDIRS If set, avoids the ``make distrib-dirs'' phase of a full
303: build. This skips running mtree(8) on DESTDIR, useful on
304: systems where building as an unprivileged user, or where
305: it is known that the system-wide mtree files have not
306: changed.
307:
308: Default: Unset.
309:
310: NOINCLUDES If set, avoids the ``make includes'' phase of a full
311: build. This has the effect of preventing make(1) from
312: thinking that some programs are out-of-date simply because
313: the system include files have changed. However, this op-
314: tion should not be used when updating the entire NetBSD
315: source tree arbitrarily; it is suggested to use UPDATE in
316: that case.
317:
318: Default: Unset.
319:
320: RELEASEDIR If set, specifies the directory to which a release(7) lay-
321: out will be written at the end of a ``make release''.
322:
323: Default: Unset.
324:
325: UPDATE If set, then in addition to the effects described for UP-
326: DATE above, this implies the effects of NOCLEANDIR.
327:
328: BUILDING
329: "make" command line options
330: This is only a summary of options available to make(1); only the options
331: used most frequently with NetBSD builds are listed here.
332:
1.10 sommerfe 333: -j njob Run up to njob make(1) subjobs in parallel. Makefiles should
334: use .WAIT or have explicit dependancies as necessary to en-
335: force build ordering. If you see build failures with -j,
336: please save complete build logs so the failures can be ana-
337: lyzed.
338:
1.1 tv 339: -m dir Specify the default directory for searching for system Make-
340: file segments, mainly the <bsd.*.mk> files. When building any
341: full NetBSD source tree, this should be set to the
342: ``share/mk'' directory in the source tree. (This is set auto-
343: matically when building from the top level.)
344:
345: -n Display the commands that would have been executed, but do not
346: actually execute them. This will still cause recursion to
347: take place.
348:
349: -v var Print make(1)'s idea of the value of var. Does not build any
350: targets.
351:
352: var=value Set the variable var to value, overriding any setting speci-
353: fied by the process environment, the MAKECONF configuration
354: file, or the system Makefile segments.
355:
356: "make" targets
357: These default targets may be built by running make(1) in any subtree of
358: the NetBSD source code. It is recommended that none of these be used
359: from the top level Makefile; as a specific exception, ``make obj'' and
360: ``make cleandir'' are useful in that context.
361:
362: all Build programs, libraries, and preformatted documentation.
363:
364: clean Remove program and library object code files.
365:
366: cleandir Same as clean, but also remove preformatted documentation, de-
367: pendency files generated by ``make depend'', and any other
368: files known to be created at build time. ``make distclean''
369: may be used as a synonym, for familiarity with a similar well-
370: known convention.
371:
372: depend Create dependency files (.depend) containing more detailed in-
373: formation about the dependencies of source code on header
374: files. Allows programs to be recompiled automatically when a
375: dependency changes.
376:
377: dependall Does a ``make depend'' immediately followed by a ``make all''.
1.10 sommerfe 378: This improves cache locality of the build since both passes
379: read the source files in their entirety.
1.1 tv 380:
381: includes Build and install system header files. Typically needed be-
382: fore any system libraries or programs can be built.
383:
384: install Install programs, libraries, and documentation into DESTDIR.
385:
386: lint Run lint(1) against the C source code, where appropriate, and
387: generate system-installed lint libraries.
388:
389: obj Create object directories to be used for built files, instead
390: of building directly in the source tree.
391:
392: tags Create ctags(1) searchable function lists usable by the ex(1)
393: and vi(1) text editors.
394:
395: "make" targets for the top level
396: Additional make(1) targets are usable specifically from the top source
397: level to facilitate building the entire NetBSD source tree.
398:
399: build Build the entire NetBSD system. This orders portions of the
400: source tree such that prerequisites will be built in the prop-
401: er order.
402:
403: release Do a ``make build'', then package the system into a standard
404: release layout as described by release(7). This requires that
405: RELEASEDIR be set (see above).
406:
407: regression-tests
408: Can only be run after building the regression tests in the di-
409: rectory ``regress''. Runs the compiled regression tests on
410: the local host.
411:
412: The "build.sh" script
413: This script file is a Bourne shell script designed to build the entire
414: NetBSD system on any host with a Bourne shell in /bin/sh, including many
415: that are not POSIX compliant. Note that if a host system's /bin/sh is
416: unusually old and broken, the Korn Shell (/bin/ksh), if available, may be
417: a usable alternative.
418:
419: All cross-compile builds, and most native builds, of the entire system
420: should make use of build.sh rather than just running ``make''. This way,
421: the make(1) program will be bootstrapped properly, in case the host sys-
422: tem has an older or incompatible ``make'' program.
423:
424: When compiling the entire system via build.sh, many make(1) variables are
425: set for you in order to help encapsulate the build process. In the list
426: of options below, variables that are automatically set by build.sh are
427: noted where applicable.
428:
429: The following are available command line options that may be supplied to
430: build.sh:
431:
432: -a arch Set the value of MACHINE_ARCH to arch.
1.9 thorpej 433:
434: -B buildid
435: Set the value of BUILDID to buildid. This will also append the
436: build idenfitier to the name of the ``make'' wrapper script so
437: that the resulting name is of the form ``nbmake-MACHINE-
438: BUILDID''.
1.1 tv 439:
440: -b Bootstrap ``make'' and create a nbmake-MACHINE script (see be-
441: low).
442:
1.6 thorpej 443: -d Build a full distribution. This differs from a normal build in
444: that etc files will also be installed. Note this does not
445: build a ``release''; no release sets are placed in ${RE-
446: LEASEDIR}.
447:
1.10 sommerfe 448: -j njob Passed through to make(1). Makefiles should use .WAIT or have
449: explicit dependancies as necessary to enforce build ordering.
450: If you see build failures with -j, please save complete build
451: logs so the failures can be analyzed.
1.1 tv 452:
453: -m mach Set the value of MACHINE to mach. This will also override any
454: value of MACHINE_ARCH in the process environment with a value
455: deduced from mach, unless -a is specified. All cross builds
456: require -m, but if unset on a NetBSD host, the host's value of
457: MACHINE will be detected and used automatically.
458:
459: -n Show the commands that would be executed by build.sh, but do
460: not make any changes. This is similar in concept to ``make
461: -n''.
462:
463: -o Set the value of MKOBJDIRS to ``no''.
464:
465: -r Remove the contents of DESTDIR and TOOLDIR before building
466: (provides a clean starting point). This will skip deleting
467: DESTDIR if building on a native system to the root directory.
468:
469: -t Build and install the host tools from src/tools only. This op-
470: tion implies -b.
471:
472: -u Set the UPDATE variable.
473:
474: -w wrapper
475: Create the nbmake wrapper script (see below) in a custom loca-
476: tion, specified by wrapper. This allows, for instance, to
477: place the wrapper in PATH automatically. Note that wrapper is
478: the full name of the file, not just a directory name.
479:
480: -D dest Set the value of DESTDIR to dest.
481:
1.12 ! lukem 482: -M obj Set MAKEOBJDIRPREFIX to obj.
! 483:
1.1 tv 484: -O obj Create an appropriate transform macro for MAKEOBJDIR that will
485: place the built object files under obj. For instance, a set-
486: ting of /usr/obj will place build-time files files under
487: /usr/obj/bin, /usr/obj/lib, and so forth.
488:
489: -R rel Set the value of RELEASEDIR to rel. Setting this option will
490: cause build.sh to run ``make release'' instead of ``make
491: build''.
492:
493: -T tools Set the value of TOOLDIR to tools. If set, the bootstrap
494: ``make'' will only be rebuilt as needed (when the source files
495: for make(1) change).
496:
1.7 lukem 497: -U Set the UNPRIVED variable.
498:
1.1 tv 499: The "nbmake-MACHINE" wrapper script
500: If using the build.sh script to build NetBSD, a nbmake-MACHINE script
501: will be created in TOOLDIR/bin upon the first build to assist in building
502: subtrees on a cross-compile host.
503:
504: nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
505: the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-
506: eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.
507: This script can be symlinked into a directory listed in PATH, or called
508: with an absolute path.
509:
1.10 sommerfe 510: OBSOLETE VARIABLES
511: NBUILDJOBS Now obsolete. Use the make(1) option -j, instead.
512:
1.1 tv 513: SEE ALSO
514: make(1), hier(7), release(7)
515:
516: HISTORY
517: The USE_NEW_TOOLCHAIN based build scheme was introduced in the ``NetBSD-
518: current'' development sources between NetBSD 1.5 and NetBSD 1.6.
519:
520: BUGS
1.10 sommerfe 521: A few platforms are not yet using the USE_NEW_TOOLCHAIN system.
1.1 tv 522:
1.11 lukem 523: NetBSD May 3, 2002 8
CVSweb <webmaster@jp.NetBSD.org>