Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files. =================================================================== RCS file: /ftp/cvs/cvsroot/src/BUILDING,v rcsdiff: /ftp/cvs/cvsroot/src/BUILDING,v: warning: Unknown phrases like `commitid ...;' are present. retrieving revision 1.20 retrieving revision 1.99 diff -u -p -r1.20 -r1.99 --- src/BUILDING 2002/12/25 00:58:00 1.20 +++ src/BUILDING 2012/02/23 13:34:15 1.99 @@ -1,22 +1,7 @@ BUILDING(8) NetBSD System Manager's Manual BUILDING(8) NAME - BUILDING - Procedure for building NetBSD from source code. - -STATUS - This document is a work-in-progress. As such, the information described - here may not match the reality of the build system as of this writing. - Once this document is completely in sync with reality, this paragraph - will be removed. - - Discrepancies between this documentation and the current reality of im- - plementation are noted specially, as with the note below: - - Note: This document applies only to platforms which use the new toolchain - as indicated by the default setting of TOOLCHAIN_MISSING in . - Platforms which have not yet been switched to the new toolchain should - continue building traditionally, using the notes specified in the file - UPDATING. + BUILDING -- Procedure for building NetBSD from source code. REQUIREMENTS NetBSD is designed to be buildable on most POSIX-compliant host systems. @@ -28,23 +13,22 @@ REQUIREMENTS host system to create a build toolchain for the target architecture. The host system must have at least C and C++ compilers in order to create the toolchain (make is not required); all other tools are created as part of - the NetBSD build process. - - Note: A couple host toolchain components are not yet available in - the tools directory. Also, some tools use non-POSIX, non-ANSI C - extensions and need to be standardized. As a result, cross-compil- - ing from systems other than NetBSD is not currently supported. + the NetBSD build process. (See the environment variables section below + if you need to override or manually select your compilers.) FILES Source tree layout - doc/BUILDING.mdoc This document (in -mdoc troff format; the original copy). BUILDING This document (in plaintext). - Makefile The main Makefile for NetBSD; should only be run for na- - tive builds with an appropriately up-to-date version of + tools/compat/README + Special notes for cross-hosting a NetBSD build on non- + NetBSD platforms. + + Makefile The main Makefile for NetBSD; should only be run for + native builds with an appropriately up-to-date version of NetBSD make(1). (For building from out-of-date systems or on a non-native host, see the build.sh shell script.) @@ -62,16 +46,19 @@ FILES Sources imported verbatim from third parties, without man- gling the existing build structure. Other source trees in bin through usr.sbin use the NetBSD make(1) ``reachover'' - Makefile semantics when building these programs for a na- - tive host. + Makefile semantics when building these programs for a + native host. distrib/, etc/ Sources for items used when making a full release snap- - shot, such as files installed in /etc on the destination - system, boot media, and release notes. + shot, such as files installed in DESTDIR/etc on the desti- + nation system, boot media, and release notes. - regress/ Regression test harness. Can be cross-compiled, but only - run natively. + tests/, regress/ + Regression test harness. Can be cross-compiled, but only + run natively. tests/ uses the atf(7) test framework; + regress/ contains older tests that have not yet been + migrated to atf(7). sys/ NetBSD kernel sources. @@ -84,6 +71,9 @@ FILES any of these directories are missing, they will be skipped during the build. + x11/ ``Reachover'' build structure for X11R6; the source is in + X11SRCDIR. + Build tree layout The NetBSD build tree is described in hier(7), and the release layout is described in release(7). @@ -92,23 +82,62 @@ CONFIGURATION Environment variables Several environment variables control the behaviour of NetBSD builds. - MACHINE Machine type. + HOST_SH Path name to a shell available on the host system and + suitable for use during the build. The NetBSD build + system requires a modern Bourne-like shell with POSIX- + compliant features, and also requires support for the + ``local'' keyword to declare local variables in shell + functions (which is a widely-implemented but non-stan- + dardised feature). + + Depending on the host system, a suitable shell may be + /bin/sh, /usr/xpg4/bin/sh, /bin/ksh (provided it is a + variant of ksh that supports the ``local'' keyword, + such as ksh88, but not ksh93), or /usr/local/bin/bash. + + Most parts of the build require HOST_SH to be an abso- + lute path; however, build.sh allows it to be a simple + command name, which will be converted to an absolute + path by searching the PATH. + + HOST_CC Path name to C compiler used to create the toolchain. - MACHINE_ARCH Machine architecture. + HOST_CXX Path name to C++ compiler used to create the toolchain. + + MACHINE Machine type, e.g., ``macppc''. + + MACHINE_ARCH Machine architecture, e.g., ``powerpc''. MAKE Path name to invoke make(1) as. - MAKEFLAGS Flags to invoke make(1) with. + MAKEFLAGS Flags to invoke make(1) with. Note that build.sh + ignores the value of MAKEFLAGS passed in the environ- + ment, but allows MAKEFLAGS to be set via the -V option. MAKEOBJDIR Directory to use as the .OBJDIR for the current direc- - tory. Used only if MAKEOBJDIRPREFIX is not defined. - MAKEOBJDIR can only be provided in the environment. - - MAKEOBJDIRPREFIX Top level directory of the object directory tree. If - this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used - as the .OBJDIR for the current directory. The current - directory may be read only. MAKEOBJDIRPREFIX can only - be provided in the environment. + tory. The value is subjected to variable expansion by + make(1). Typical usage is to set this variable to a + value involving the use of `${.CURDIR:S...}' or + `${.CURDIR:C...}', to derive the value of .OBJDIR from + the value of .CURDIR. Used only if MAKEOBJDIRPREFIX is + not defined. MAKEOBJDIR can be provided only in the + environment or via the -O flag of build.sh; it cannot + usefully be set inside a Makefile, including mk.conf or + ${MAKECONF}. + + MAKEOBJDIRPREFIX Top level directory of the object directory tree. The + value is subjected to variable expansion by make(1). + build.sh will create the ${MAKEOBJDIRPREFIX} directory + if necessary, but if make(1) is used without build.sh, + then rules in will abort the build if the + ${MAKEOBJDIRPREFIX} directory does not exist. If the + value is defined and valid, then ${MAKEOBJDIRPRE- + FIX}/${.CURDIR} is used as the .OBJDIR for the current + directory. The current directory may be read only. + MAKEOBJDIRPREFIX can be provided only in the environ- + ment or via the -M flag of build.sh; it cannot usefully + be set inside a Makefile, including mk.conf or + ${MAKECONF}. "make" variables Several variables control the behavior of NetBSD builds. Unless other- @@ -120,23 +149,58 @@ CONFIGURATION configuration file in order to set additional build parame- ters, such as compiler flags. + BUILDSEED GCC uses random numbers when compiling C++ code. This vari- + able seeds the gcc random number generator using the -fran- + dom-seed flag with this value. By default, it is set to + NetBSD-(majorversion). Using a fixed value causes C++ bina- + ries to be the same when built from the same sources, result- + ing in identical (reproducible) builds. Additional informa- + tion is available in the GCC documentation of -frandom-seed. + DESTDIR Directory to contain the built NetBSD system. If set, spe- cial options are passed to the compilation tools to prevent their default use of the host system's /usr/include, - /usr/lib, and so forth. This pathname should not end with a - slash (/) character (for installation into the system's root - directory, set DESTDIR to an empty string). The directory - must reside on a file system which supports long file names - and hard links. + /usr/lib, and so forth. This pathname must be an absolute + path, and should not end with a slash (/) character. (For + installation into the system's root directory, set DESTDIR to + an empty string, not to ``/''). The directory must reside on + a file system which supports long file names and hard links. Default: Empty string if USETOOLS is ``yes''; unset other- wise. + Note: build.sh will provide a default of destdir.MACHINE (in + the top-level .OBJDIR) unless run in `expert' mode. + MAKECONF The name of the make(1) configuration file. Only settable in the process environment. Default: ``/etc/mk.conf'' + MAKEVERBOSE + Level of verbosity of status messages. Supported values: + + 0 No descriptive messages or commands executed by make(1) + are shown. + + 1 Brief messages are shown describing what is being done, + but the actual commands executed by make(1) are not dis- + played. + + 2 Descriptive messages are shown as above (prefixed with a + `#'), and ordinary commands performed by make(1) are + displayed. + + 3 In addition to the above, all commands performed by + make(1) are displayed, even if they would ordinarily + have been hidden through use of the ``@'' prefix in the + relevant makefile. + + 4 In addition to the above, commands executed by make(1) + are traced through use of the sh(1) ``-x'' flag. + + Default: 2 + MKCATPAGES Can be set to ``yes'' or ``no''. Indicates whether prefor- matted plaintext manual pages will be created during a build. @@ -145,14 +209,19 @@ CONFIGURATION MKCRYPTO Can be set to ``yes'' or ``no''. Indicates whether crypto- graphic code will be included in a build; provided for the benefit of countries that do not allow strong cryptography. - Will not affect use of the standard low-security password en- - cryption system, crypt(3). + Will not affect use of the standard low-security password + encryption system, crypt(3). Default: ``yes'' MKDOC Can be set to ``yes'' or ``no''. Indicates whether system - documentation destined for /usr/share/doc will be installed - during a build. + documentation destined for DESTDIR/usr/share/doc will be + installed during a build. + + Default: ``yes'' + + MKHTML Can be set to ``yes'' or ``no''. Indicates whether prefor- + matted HTML manual pages will be built and installed Default: ``yes'' @@ -173,10 +242,15 @@ CONFIGURATION Default: ``yes'' + MKKMOD Can be set to ``yes'' or ``no''. Indicates whether kernel + modules are built and installed. + + Default: ``yes'' + MKLINT Can be set to ``yes'' or ``no''. Indicates whether lint(1) will be run against portions of the NetBSD source code during the build, and whether lint libraries will be installed into - /usr/libdata/lint. + DESTDIR/usr/libdata/lint. Default: ``yes'' @@ -186,8 +260,8 @@ CONFIGURATION Default: ``yes'' MKNLS Can be set to ``yes'' or ``no''. Indicates whether Native - Language System locale zone files will be compiled and in- - stalled during a build. + Language System locale zone files will be compiled and + installed during a build. Default: ``yes'' @@ -198,6 +272,9 @@ CONFIGURATION Default: ``yes'' + Note that setting MKOBJ to ``no'' is not recommended and may + cause problems when updating the tree with cvs(1). + MKPIC Can be set to ``yes'' or ``no''. Indicates whether shared objects and libraries will be created and installed during a build. If set to ``no'', the entire built system will be @@ -208,8 +285,8 @@ CONFIGURATION MKPICINSTALL Can be set to ``yes'' or ``no''. Indicates whether the ar(1) - format libraries (lib*_pic.a), used to generate shared li- - braries, are installed during a build. + format libraries (lib*_pic.a), used to generate shared + libraries, are installed during a build. Default: ``yes'' @@ -222,36 +299,50 @@ CONFIGURATION code. MKSHARE Can be set to ``yes'' or ``no''. Indicates whether files - destined to reside in /usr/share will be built and installed - during a build. If set to ``no'', then all of MKCATPAGES, - MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon- - ditionally. + destined to reside in DESTDIR/usr/share will be built and + installed during a build. If set to ``no'', then all of + MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to + ``no'' unconditionally. Default: ``yes'' - TOOLDIR Directory to hold the host tools, once built. This directory - should be unique to a given host system and NetBSD source - tree. (However, multiple targets may share the same TOOLDIR; - the target-dependent files have unique names.) If unset, a - default based on the uname(1) information of the host plat- - form will be created in the .OBJDIR of src/tools. + MKSTRIPIDENT + Can be set to ``yes'' or ``no''. Indicates whether program + binaries and shared libraries should be built to include RCS + IDs for use with ident(1). - Default: Unset. + Default: ``no'' - UNPRIVED If set, then an unprivileged install will occur. The user, - group, permissions, and file flags, will not be set on the - installed item; instead the information will be appended to a - file called METALOG in DESTDIR. The contents of METALOG is - used during the generation of the distribution tar files to - ensure that the appropriate file ownership is stored. + MKUNPRIVED Can be set to ``yes'' or ``no''. Indicates whether an + unprivileged install will occur. The user, group, permis- + sions, and file flags, will not be set on the installed + items; instead the information will be appended to a file + called METALOG in DESTDIR. The contents of METALOG are used + during the generation of the distribution tar files to ensure + that the appropriate file ownership is stored. - Default: Unset. + Default: ``no'' + + MKUPDATE Can be set to ``yes'' or ``no''. Indicates whether all + install operations intended to write to DESTDIR will compare + file timestamps before installing, and skip the install phase + if the destination files are up-to-date. This also has + implications on full builds (see next subsection). + + Default: ``no'' + + MKX11 Can be set to ``yes'' or ``no''. Indicates whether X11 is + built from X11SRCDIR. - UPDATE If set, then all install operations intended to write to - DESTDIR will compare file timestamps before installing, and - skip the install phase if the destination files are up-to- - date. This also has implications on full builds (see next - subsection). + Default: ``no'' + + TOOLDIR Directory to hold the host tools, once built. If specified, + must be an absolute path. This directory should be unique to + a given host system and NetBSD source tree. (However, multi- + ple targets may share the same TOOLDIR; the target-dependent + files have unique names.) If unset, a default based on the + uname(1) information of the host platform will be created in + the .OBJDIR of src. Default: Unset. @@ -273,28 +364,54 @@ CONFIGURATION build or runtime problems when building the whole NetBSD source tree. - Default: ``yes'' if building all or part of a whole NetBSD - source tree (detected automatically); ``no'' otherwise (to - preserve traditional semantics of the make(1) in- - clude files). + Default: ``yes'', unless TOOLCHAIN_MISSING is set to ``yes''. + + USETOOLS is also set to ``no'' when using outside + the NetBSD source tree. + + X11SRCDIR Directory containing the X11R6 source. If specified, must be + an absolute path. The main X11R6 source is found in + X11SRCDIR/xfree/xc. + + Default: NETBSDRCDIR/../xsrc, if that exists; otherwise + /usr/xsrc. + + X11FLAVOUR The style of X11 cross-built, set to either ``Xorg'' or + ``XFree86''. + + Default: ``Xorg'' on amd64, i386, macppc, shark and sparc64 + platforms, ``XFree86'' on everything else. "make" variables for full builds These variables only affect the top level ``Makefile'' and do not affect manually building subtrees of the NetBSD source code. INSTALLWORLDDIR Location for the ``make installworld'' target to install - to. + to. If specified, must be an absolute path. Default: ``/'' - MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether ob- - ject directories will be created automatically (via a + MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether + object directories will be created automatically (via a ``make obj'' pass) at the start of a build. - Default: ``yes'' + Default: ``no'' + + If using build.sh, the default is ``yes''. This may be + set back to ``no'' by giving build.sh the -o option. - NBUILDJOBS Now obsolete. Use the make(1) option -j, instead (see - below) + MKUPDATE Can be set to ``yes'' or ``no''. If set, then in addi- + tion to the effects described for MKUPDATE=yes above, + this implies the effects of NOCLEANDIR (i.e., ``make + cleandir'' is avoided). + + Default: ``no'' + + If using build.sh, this may be set by giving the -u + option. + + NBUILDJOBS Now obsolete. Use the make(1) option -j, instead. See + below. Default: Unset. @@ -305,6 +422,8 @@ CONFIGURATION Default: Unset. + See also MKUPDATE. + NODISTRIBDIRS If set, avoids the ``make distrib-dirs'' phase of a full build. This skips running mtree(8) on DESTDIR, useful on systems where building as an unprivileged user, or @@ -315,44 +434,44 @@ CONFIGURATION NOINCLUDES If set, avoids the ``make includes'' phase of a full build. This has the effect of preventing make(1) from - thinking that some programs are out-of-date simply be- - cause the system include files have changed. However, + thinking that some programs are out-of-date simply + because the system include files have changed. However, this option should not be used when updating the entire NetBSD source tree arbitrarily; it is suggested to use - UPDATE in that case. + MKUPDATE=yes instead in that case. Default: Unset. RELEASEDIR If set, specifies the directory to which a release(7) layout will be written at the end of a ``make release''. + If specified, must be an absolute path. Default: Unset. - UPDATE If set, then in addition to the effects described for - UPDATE above, this implies the effects of NOCLEANDIR. + Note: build.sh will provide a default of releasedir (in + the top-level .OBJDIR) unless run in `expert' mode. BUILDING "make" command line options - This is only a summary of options available to make(1); only the options - used most frequently with NetBSD builds are listed here. + This is not a summary of all the options available to make(1); only the + options used most frequently with NetBSD builds are listed here. -j njob Run up to njob make(1) subjobs in parallel. Makefiles should - use .WAIT or have explicit dependancies as necessary to en- - force build ordering. If you see build failures with -j, - please save complete build logs so the failures can be ana- - lyzed. + use .WAIT or have explicit dependencies as necessary to + enforce build ordering. -m dir Specify the default directory for searching for system Make- file segments, mainly the files. When building any full NetBSD source tree, this should be set to the - ``share/mk'' directory in the source tree. (This is set auto- - matically when building from the top level.) + ``share/mk'' directory in the source tree. This is set auto- + matically when building from the top level, or when using + build.sh. -n Display the commands that would have been executed, but do not actually execute them. This will still cause recursion to take place. - -v var Print make(1)'s idea of the value of var. Does not build any + -V var Print make(1)'s idea of the value of var. Does not build any targets. var=value Set the variable var to value, overriding any setting speci- @@ -369,14 +488,12 @@ BUILDING clean Remove program and library object code files. - cleandir Same as clean, but also remove preformatted documentation, de- - pendency files generated by ``make depend'', and any other - files known to be created at build time. ``make distclean'' - may be used as a synonym, for familiarity with a similar well- - known convention. + cleandir Same as clean, but also remove preformatted documentation, + dependency files generated by ``make depend'', and any other + files known to be created at build time. - depend Create dependency files (.depend) containing more detailed in- - formation about the dependencies of source code on header + depend Create dependency files (.depend) containing more detailed + information about the dependencies of source code on header files. Allows programs to be recompiled automatically when a dependency changes. @@ -384,13 +501,15 @@ BUILDING This improves cache locality of the build since both passes read the source files in their entirety. - includes Build and install system header files. Typically needed be- - fore any system libraries or programs can be built. + distclean Synonym for cleandir. + + includes Build and install system header files. Typically needed + before any system libraries or programs can be built. install Install programs, libraries, and documentation into DESTDIR. - Few files will be installed to /dev, /etc, /root or /var in - order to prevent user supplied configuration data from being - overwritten. + Few files will be installed to DESTDIR/dev, DESTDIR/etc, + DESTDIR/root or DESTDIR/var in order to prevent user supplied + configuration data from being overwritten. lint Run lint(1) against the C source code, where appropriate, and generate system-installed lint libraries. @@ -405,39 +524,179 @@ BUILDING Additional make(1) targets are usable specifically from the top source level to facilitate building the entire NetBSD source tree. - build Build the entire NetBSD system. This orders portions of - the source tree such that prerequisites will be built in - the proper order. + build Build the entire NetBSD system (except the kernel). This + orders portions of the source tree such that prerequisites + will be built in the proper order. distribution Do a ``make build'', and then install a full distribution - into DESTDIR. + (which does not include a kernel) into DESTDIR, including + files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and + DESTDIR/var. buildworld As per ``make distribution'', except that it ensures that DESTDIR is not the root directory. - installworld Install the distribution from DESTDIR to INSTALLWORLDDIR - (which defaults to the root directory). Ensures that - INSTALLWORLDDIR is the not root directory if cross compil- + installworld Install the distribution from DESTDIR to INSTALLWORLDDIR, + which defaults to the root directory. Ensures that + INSTALLWORLDDIR is not the root directory if cross compil- ing. - Note: It is highly recommended that you upgrade your kernel - and reboot before performing this operation. - - release Do a ``make build'', then package the system into a stan- - dard release layout as described by release(7). This re- - quires that RELEASEDIR be set (see above). + The INSTALLSETS environment variable may be set to a space- + separated list of distribution sets to be installed. By + default, all sets except ``etc'' and ``xetc'' are + installed, so most files in INSTALLWORLDDIR/etc will not be + installed or modified. + + Note: Before performing this operation with + INSTALLWORLDDIR=/, it is highly recommended that you + upgrade your kernel and reboot. After performing this + operation, it is recommended that you use etcupdate(8) to + update files in INSTALLWORLDDIR/etc and that you use + postinstall(8) to check for inconsistencies (and possibly + to fix them). + + sets Create distribution sets from DESTDIR into + RELEASEDIR/RELEASEMACHINEDIR/binary/sets. Should be run + after ``make distribution'', as ``make build'' alone does + not install all of the required files. + + sourcesets Create source sets of the source tree into + RELEASEDIR/source/sets. + + syspkgs Create syspkgs from DESTDIR into + RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs. Should be run + after ``make distribution'', as ``make build'' alone does + not install all of the required files. + + release Do a ``make distribution'', build kernels, distribution + media, and install sets (this as per ``make sets''), and + then package the system into a standard release layout as + described by release(7). This requires that RELEASEDIR be + set (see above). + + iso-image Create a NetBSD installation CD-ROM image in the + RELEASEDIR/iso directory. The CD-ROM file system will have + a layout as described in release(7). + + For most machine types, the CD-ROM will be bootable, and + will automatically run the sysinst(8) menu-based installa- + tion program, which can be used to install or upgrade a + NetBSD system. Bootable CD-ROMs also contain tools that + may be useful in repairing a damaged NetBSD installation. + + Before ``make iso-image'' is attempted, RELEASEDIR must be + populated by ``make release'' or equivalent. + + Note that other, smaller, CD-ROM images may be created in + the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc- + tory by ``make release''. These smaller images usually + contain the same tools as the larger images in + RELEASEDIR/iso, but do not contain additional content such + as the distribution sets. + + Note that the mac68k port still uses an older method of + creating CD-ROM images. This requires the mkisofs(1) util- + ity, which is not part of NetBSD, but which can be + installed from pkgsrc/sysutils/cdrtools. + + iso-image-source + Create a NetBSD installation CD-ROM image in the + RELEASEDIR/iso directory. The CD-ROM file system will have + a layout as described in release(7). It will have top + level directories for the machine type and source. + + For most machine types, the CD-ROM will be bootable, and + will automatically run the sysinst(8) menu-based installa- + tion program, which can be used to install or upgrade a + NetBSD system. Bootable CD-ROMs also contain tools that + may be useful in repairing a damaged NetBSD installation. + + Before ``make iso-image-source'' is attempted, RELEASEDIR + must be populated by ``make sourcesets release'' or equiva- + lent. + + Note that other, smaller, CD-ROM images may be created in + the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc- + tory by ``make release''. These smaller images usually + contain the same tools as the larger images in + RELEASEDIR/iso, but do not contain additional content such + as the distribution sets. + + Note that the mac68k port still uses an older method of + creating CD-ROM images. This requires the mkisofs(1) util- + ity, which is not part of NetBSD, but which can be + installed from pkgsrc/sysutils/cdrtools. + + install-image + Create a bootable NetBSD installation disk image in the + RELEASEDIR/RELEASEMACHINEDIR/installation/installimage + directory. The installation disk image is suitable for + copying to bootable USB flash memory sticks, etc., for + machines which are able to boot from such devices. The + file system in the bootable disk image will have a layout + as described in release(7). + + The installation image is bootable, and will automatically + run the sysinst(8) menu-based installation program, which + can be used to install or upgrade a NetBSD system. The + image also contains tools that may be useful in repairing a + damaged NetBSD installation. + + Before ``make install-image'' is attempted, RELEASEDIR must + be populated by ``make release'' or equivalent. The build + must have been performed with MKUNPRIVED=yes because ``make + install-image'' relies on information in DESTDIR/METALOG. + + live-image Create NetBSD live images in the + RELEASEDIR/RELEASEMACHINEDIR/installation/liveimage direc- + tory. The live image contains all necessary files to boot + NetBSD up to multi-user mode, including all files which + should be extracted during installation, NetBSD disklabel, + bootloaders, etc. + + The live image is suitable for use as a disk image in vir- + tual machine environments such as QEMU, and also useful to + boot NetBSD from a USB flash memory stick on a real + machine, without the need for installation. + + Before ``make live-image'' is attempted, RELEASEDIR must be + populated by ``make release'' or equivalent. The build + must have been performed with MKUNPRIVED=yes because ``make + install-image'' relies on information in DESTDIR/METALOG. regression-tests Can only be run after building the regression tests in the - directory ``regress''. Runs the compiled regression tests - on the local host. + directory ``regress''. Runs those compiled regression + tests on the local host. Note that most tests are now man- + aged instead using atf(7); this target should probably run + those as well but currently does not. The "build.sh" script - This script file is a Bourne shell script designed to build the entire - NetBSD system on any host with a Bourne shell in /bin/sh, including many - that are not POSIX compliant. Note that if a host system's /bin/sh is - unusually old and broken, the Korn Shell (/bin/ksh), if available, may be - a usable alternative. + This script file is a shell script designed to build the entire NetBSD + system on any host with a suitable modern shell and some common utili- + ties. The required shell features are described under the HOST_SH vari- + able. + + If a host system's default shell does support the required features, then + we suggest that you explicitly specify a suitable shell using a command + like + + /path/to/suitable/shell build.sh [options] + + The above command will usually enable build.sh to automatically set + HOST_SH=/path/to/suitable/shell, but if that fails, then the following + set of commands may be used instead: + + HOST_SH=/path/to/suitable/shell + export HOST_SH + ${HOST_SH} build.sh [options] + + If build.sh detects that it is being executed under an unsuitable shell, + it attempts to exec a suitable shell instead, or prints an error message. + If HOST_SH is not set explicitly, then build.sh sets a default using + heuristics dependent on the host platform, or from the shell under which + build.sh is executed (if that can be determined), or using the first copy + of sh found in PATH. All cross-compile builds, and most native builds, of the entire system should make use of build.sh rather than just running ``make''. This way, @@ -449,97 +708,239 @@ BUILDING of options below, variables that are automatically set by build.sh are noted where applicable. - The following are available command line options that may be supplied to - build.sh: + The following operations are supported by build.sh: + + build Build the system as per ``make build''. Before the main + part of the build commences, this command runs the obj + operation (unless the -o option is given), ``make + cleandir'' (unless the -u option is given), and the tools + operation. + + distribution Build a full distribution as per ``make distribution''. + This command first runs the build operation. + + release Build a full release as per ``make release''. This command + first runs the distribution operation. + + makewrapper Create the nbmake-MACHINE wrapper. This operation is auto- + matically performed for any of the other operations. + + cleandir Perform ``make cleandir''. + + obj Perform ``make obj''. + + tools Build and install the host tools from src/tools. This com- + mand will first run ``make obj'' and ``make cleandir'' in + the tools subdirectory unless the -o or -u options (respec- + tively) are given. + + install=idir Install the contents of DESTDIR to idir, using ``make + installworld''. Note that files that are part of the + ``etc'' or ``xetc'' sets will not be installed, unless + overridden by the INSTALLSETS environment variable. + + kernel=kconf Build a new kernel. The kconf argument is the name of a + configuration file suitable for use by config(1). If kconf + does not contain any `/' characters, the configuration file + is expected to be found in the KERNCONFDIR directory, which + is typically sys/arch/MACHINE/conf. The new kernel will be + built in a subdirectory of KERNOBJDIR, which is typically + sys/arch/MACHINE/compile or an associated object directory. + + This command does not imply the tools command; run the + tools command first unless it is certain that the tools + already exist and are up to date. + + This command will run ``make cleandir'' on the kernel in + question first unless the -u option is given. + + modules This command will build kernel modules and install them + into DESTDIR. + + releasekernel=kconf + Install a gzip(1)ed copy of the kernel previously built by + kernel=kconf into + RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as + netbsd-kconf.gz, although the ``netbsd'' prefix is deter- + mined from the ``config'' directives in kconf. + + sets Perform ``make sets''. + + sourcesets Perform ``make sourcesets''. + + syspkgs Perform ``make syspkgs''. + + iso-image Perform ``make iso-image''. + + iso-image-source + Perform ``make iso-image-source''. + + install-image + Perform ``make install-image''. + + live-image Perform ``make live-image''. + + The following command line options alter the behaviour of the build.sh + operations described above: -a arch Set the value of MACHINE_ARCH to arch. -B buildid Set the value of BUILDID to buildid. This will also append the - build idenfitier to the name of the ``make'' wrapper script so - that the resulting name is of the form ``nbmake-MACHINE- - BUILDID''. - - -b Bootstrap ``make'' and create a nbmake-MACHINE script (see be- - low). - - -D dest Set the value of DESTDIR to dest. - - -d Build a full distribution. This differs from a default build - in that files will also be installed to /dev, /etc, /root and - /var. Note this does not build a ``release''; no release sets - are placed in ${RELEASEDIR}. -d is implied by -R. - - -E Set `expert' mode; DESTDIR does not have to be set to a non- - root path for builds when this is set. - - -i installworlddir - Install the contents of DESTDIR to installworlddir after all - other operations have completed, using the top level - ``installworld'' target. - - -j njob Passed through to make(1). Makefiles should use .WAIT or have - explicit dependancies as necessary to enforce build ordering. - If you see build failures with -j, please save complete build - logs so the failures can be analyzed. - - -k kernel - Build a new kernel. The kernel argument is the name of a con- - figuration file suitable for use by config(8). If kernel does - not contain any `/' characters, the configuration file is ex- - pected to be found in the KERNCONFDIR directory, which is typi- - cally sys/arch/MACHINE/conf. The new kernel will be built in a - subdirectory of KERNOBJDIR, which is typically - sys/arch/MACHINE/compile or an associated object directory. In - order to ensure that the kernel is built using up-to-date - tools, it is strongly recommended that the tools be rebuilt - (using the -t option) in a separate invocation of build.sh pri- - or to using the -k option, or that the -t and -k options be - used together in a single invocation of build.sh. - - -M obj Set MAKEOBJDIRPREFIX to obj. - - -m mach Set the value of MACHINE to mach. This will also override any - value of MACHINE_ARCH in the process environment with a value - deduced from mach, unless -a is specified. All cross builds - require -m, but if unset on a NetBSD host, the host's value of - MACHINE will be detected and used automatically. + build identifier to the name of the ``make'' wrapper script so + that the resulting name is of the form + ``nbmake-MACHINE-BUILDID''. + + -C cdextras + Append cdextras to the CDEXTRA variable, which is a space-sepa- + rated list of files or directories that will be added to the + CD-ROM image that may be create by the ``iso-image'' or + ``iso-image-source'' operations. Files will be added to the + root of the CD-ROM image, whereas directories will be copied + recursively. If relative paths are specified, they will be + converted to absolute paths before being used. Multiple paths + may be specified via multiple -C options, or via a single + option whose argument contains multiple space-separated paths. + + -D dest Set the value of DESTDIR to dest. If a relative path is speci- + fied, it will be converted to an absolute path before being + used. + + -E Set `expert' mode. This overrides various sanity checks, and + allows: DESTDIR does not have to be set to a non-root path for + builds, and MKUNPRIVED=yes does not have to be set when build- + ing as a non-root user. + + Note: It is highly recommended that you know what you are doing + when you use this option. + + -h Print a help message. + + -j njob Run up to njob make(1) subjobs in parallel; passed through to + make(1). If you see failures for reasons other than running + out of memory while using build.sh with -j, please save com- + plete build logs so the failures can be analyzed. + + To achieve the fastest builds, -j values between (1 + the num- + ber of CPUs) and (2 * the number of CPUs) are recommended. Use + lower values on machines with limited memory or I/O bandwidth. + + -M obj Set MAKEOBJDIRPREFIX to obj. Unsets MAKEOBJDIR. See ``-O + -obj'' for more information. + + For instance, if the source directory is /usr/src, a setting of + ``-M /usr/obj'' will place build-time files under + /usr/obj/usr/src/bin, /usr/obj/usr/src/lib, + /usr/obj/usr/src/usr.bin, and so forth. + + If a relative path is specified, it will be converted to an + absolute path before being used. build.sh imposes the restric- + tion that the argument to the -M option must not begin with a + ``$'' (dollar sign) character; otherwise it would be too diffi- + cult to determine whether the value is an absolute or a rela- + tive path. If the directory does not already exist, build.sh + will create it. + + -m mach Set the value of MACHINE to mach, except in some special cases + listed below. This will also override any value of + MACHINE_ARCH in the process environment with a value deduced + from mach, unless -a is specified. All cross builds require + -m, but if unset on a NetBSD host, the host's value of MACHINE + will be detected and used automatically. + + Some machines support multiple values for MACHINE_ARCH. The + following special cases for the mach argument are defined to + set the listed values of MACHINE and MACHINE_ARCH: + + mach MACHINE MACHINE_ARCH + evbarm evbarm (not set) + evbarm-eb evbarm armeb + evbarm-el evbarm arm + evbmips evbmips (not set) + evbmips-eb evbmips mipseb + evbmips-el evbmips mipsel + evbsh3 evbsh3 (not set) + evbsh3-eb evbsh3 sh3eb + evbsh3-el evbsh3 sh3el + sbmips sbmips (not set) + sbmips-eb sbmips mipseb + sbmips-el sbmips mipsel + + -N noiselevel + Set the ``noisyness'' level of the build, by setting + MAKEVERBOSE to noiselevel. -n Show the commands that would be executed by build.sh, but do not make any changes. This is similar in concept to ``make -n''. -O obj Create an appropriate transform macro for MAKEOBJDIR that will - place the built object files under obj. For instance, a set- - ting of /usr/obj will place build-time files under - /usr/obj/bin, /usr/obj/lib, and so forth. - - -o Set the value of MKOBJDIRS to ``no''. - - -R rel Set the value of RELEASEDIR to rel. Setting this option will - cause build.sh to run ``make release'' instead of ``make - build''. + place the built object files under obj. Unsets + MAKEOBJDIRPREFIX. + + For instance, a setting of ``-O /usr/obj'' will place build- + time files under /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, + and so forth. + + If a relative path is specified, it will be converted to an + absolute path before being used. build.sh imposes the restric- + tion that the argument to the -O option must not contain a + ``$'' (dollar sign) character. If the directory does not + already exist, build.sh will create it. + + In normal use, exactly one of the -M or -O options should be + specified. If neither -M nor -O is specified, then a default + object directory will be chosen according to rules in + . Relying on this default is not recommended + because it is determined by complex rules that are influenced + by the values of several variables and by the location of the + source directory. + + -o Set the value of MKOBJDIRS to ``no''. Otherwise, it will be + automatically set to ``yes''. This default is opposite to the + behaviour when not using build.sh. + + -R rel Set the value of RELEASEDIR to rel. If a relative path is + specified, it will be converted to an absolute path before + being used. -r Remove the contents of DESTDIR and TOOLDIR before building (provides a clean starting point). This will skip deleting DESTDIR if building on a native system to the root directory. - -T tools Set the value of TOOLDIR to tools. If set, the bootstrap - ``make'' will only be rebuilt as needed (when the source files - for make(1) change). + -S seed Change the value of BUILDSEED to seed. This should rarely be + necessary. + + -T tools Set the value of TOOLDIR to tools. If a relative path is spec- + ified, it will be converted to an absolute path before being + used. If set, the bootstrap ``make'' will only be rebuilt if + the source files for make(1) have changed. - -t Build and install the host tools from src/tools only. This op- - tion implies -b. + -U Set MKUNPRIVED=yes. - -U Set the UNPRIVED variable. + -u Set MKUPDATE=yes. - -u Set the UPDATE variable. + -V var=[value] + Set the environment variable var to an optional value. This is + propagated to the nbmake wrapper. -w wrapper Create the nbmake wrapper script (see below) in a custom loca- tion, specified by wrapper. This allows, for instance, to place the wrapper in PATH automatically. Note that wrapper is - the full name of the file, not just a directory name. + the full name of the file, not just a directory name. If a + relative path is specified, it will be converted to an absolute + path before being used. + + -X x11src + Set the value of X11SRCDIR to x11src. If a relative path is + specified, it will be converted to an absolute path before + being used. + + -x Set MKX11=yes. + + -Z var Unset ("zap") the environment variable var. This is propagated + to the nbmake wrapper. The "nbmake-MACHINE" wrapper script If using the build.sh script to build NetBSD, a nbmake-MACHINE script @@ -549,47 +950,51 @@ BUILDING nbmake-MACHINE can be invoked in lieu of make(1), and will instead call the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev- eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR. + nbmake-MACHINE will also set variables specified with -V, and unset vari- + ables specified with -Z. + This script can be symlinked into a directory listed in PATH, or called with an absolute path. EXAMPLES - ./build.sh -t - Build a new toolchain. + 1. % ./build.sh [options] tools kernel=GENERIC + + Build a new toolchain, and use the new toolchain to configure and + build a new GENERIC kernel. + + 2. % ./build.sh [options] -U distribution - cd ${KERNCONFDIR} ; ${TOOLDIR}/bin/nbconfig GENERIC - Use the new version of config(8) to prepare to build a new - GENERIC kernel. - - cd ${KERNOBJDIR}/GENERIC ; ${TOOLDIR}/bin/nbmake-${MACHINE} dependall - Use the new toolchain to build a new GENERIC kernel. - - ./build.sh -t -k GENERIC - Build a new toolchain, and use the new toolchain to configure - and build a new GENERIC kernel. - - ./build.sh -U -d - Using unprivileged mode, build a complete distribution in - DESTDIR. - - ./build.sh -U -R /some/dir/RELEASE - Using unprivileged mode, build a complete release in the speci- - fied release directory. + Using unprivileged mode, build a complete distribution to a DESTDIR + directory that build.sh selects (and will display). + + 3. # ./build.sh [options] -U install=/ + + As root, install to / the distribution that was built by example 2. + Even though this is run as root, -U is required so that the permis- + sions stored in DESTDIR/METALOG are correctly applied to the files + as they're copied to /. + + 4. % ./build.sh [options] -U -u release + + Using unprivileged mode, build a complete release to DESTDIR and + RELEASEDIR directories that build.sh selects (and will display). + MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that + if this is run after example 2, it doesn't need to redo that portion + of the release build. OBSOLETE VARIABLES - NBUILDJOBS Use the make(1) option -j, instead. + NBUILDJOBS Use the make(1) option -j instead. USE_NEW_TOOLCHAIN The new toolchain is now the default. To disable, use TOOLCHAIN_MISSING=yes. SEE ALSO - make(1), hier(7), release(7) + make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8), + pkgsrc/sysutils/cdrtools HISTORY The build.sh based build scheme was introduced for NetBSD 1.6 as USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that. -BUGS - A few platforms are not yet using this build system. - -NetBSD December 25, 2002 9 +NetBSD September 9, 2011 NetBSD