[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.66 and 1.104

version 1.66, 2007/09/01 09:32:19 version 1.104, 2013/05/29 14:47:22
Line 1 
Line 1 
 BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)  BUILDING(8)                 System Manager's Manual                BUILDING(8)
   
 NAME  NNAAMMEE
      BUILDING -- Procedure for building NetBSD from source code.       BBUUIILLDDIINNGG -- Procedure for building NetBSD from source code.
   
 REQUIREMENTS  RREEQQUUIIRREEMMEENNTTSS
      NetBSD is designed to be buildable on most POSIX-compliant host systems.       NetBSD is designed to be buildable on most POSIX-compliant host systems.
      The basic build procedure is the same whether compiling natively (on the       The basic build procedure is the same whether compiling _n_a_t_i_v_e_l_y (on the
      same NetBSD architecture) or cross compiling (on another architecture or       same NetBSD architecture) or _c_r_o_s_s _c_o_m_p_i_l_i_n_g (on another architecture or
      OS).       OS).
   
      This source tree contains a special subtree, ``tools'', which uses the       This source tree contains a special subtree, ``tools'', which uses the
      host system to create a build toolchain for the target architecture.  The       host system to create a build toolchain for the target architecture.  The
      host system must have at least C and C++ compilers in order to create the       host system must have at least C and C++ compilers in order to create the
      toolchain (make is not required); all other tools are created as part of       toolchain (mmaakkee is not required); all other tools are created as part of
      the NetBSD build process.  (See the environment variables section below       the NetBSD build process.  (See the environment variables section below
      if you need to override or manually select your compilers.)       if you need to override or manually select your compilers.)
   
 FILES  FFIILLEESS
    Source tree layout     SSoouurrccee ttrreeee llaayyoouutt
      doc/BUILDING.mdoc       ddoocc//BBUUIILLDDIINNGG..mmddoocc
                     This document (in -mdoc troff format; the original copy).                      This document (in -mdoc troff format; the original copy).
   
      BUILDING       This document (in plaintext).       BBUUIILLDDIINNGG       This document (in plaintext).
   
      tools/compat/README       ttoooollss//ccoommppaatt//RREEAADDMMEE
                     Special notes for cross-hosting a NetBSD build on non-                      Special notes for cross-hosting a NetBSD build on non-
                     NetBSD platforms.                      NetBSD platforms.
   
      Makefile       The main Makefile for NetBSD; should only be run for       MMaakkeeffiillee       The main Makefile for NetBSD; should only be run for
                     native builds with an appropriately up-to-date version of                      native builds with an appropriately up-to-date version of
                     NetBSD make(1).  (For building from out-of-date systems or                      NetBSD make(1).  (For building from out-of-date systems or
                     on a non-native host, see the build.sh shell script.)                      on a non-native host, see the bbuuiilldd..sshh shell script.)
   
      UPDATING       Special notes for updating from an earlier revision of       UUPPDDAATTIINNGG       Special notes for updating from an earlier revision of
                     NetBSD.  It is important to read this file before every                      NetBSD.  It is important to read this file before every
                     build of an updated source tree.                      build of an updated source tree.
   
      build.sh       Bourne-compatible shell script used for building the host       bbuuiilldd..sshh       Bourne-compatible shell script used for building the host
                     build tools and the NetBSD system from scratch.  Can be                      build tools and the NetBSD system from scratch.  Can be
                     used for both native and cross builds, and should be used                      used for both native and cross builds, and should be used
                     instead of make(1) for any source tree that is updated and                      instead of make(1) for any source tree that is updated and
                     recompiled regularly.                      recompiled regularly.
   
      crypto/dist/, dist/, gnu/dist/       ccrryyppttoo//ddiisstt//, ddiisstt//, ggnnuu//ddiisstt//
                     Sources imported verbatim from third parties, without man-                      Sources imported verbatim from third parties, without
                     gling the existing build structure.  Other source trees in                      mangling the existing build structure.  Other source trees
                     bin through usr.sbin use the NetBSD make(1) ``reachover''                      in bbiinn through uussrr..ssbbiinn use the NetBSD make(1)
                     Makefile semantics when building these programs for a                      ``reachover'' Makefile semantics when building these
                     native host.                      programs for a native host.
   
      distrib/, etc/       ddiissttrriibb//, eettcc//
                     Sources for items used when making a full release snap-                      Sources for items used when making a full release
                     shot, such as files installed in DESTDIR/etc on the desti-                      snapshot, such as files installed in DDEESSTTDDIIRR_/_e_t_c on the
                     nation system, boot media, and release notes.                      destination system, boot media, and release notes.
   
      regress/       Regression test harness.  Can be cross-compiled, but only       tteessttss//, rreeggrreessss//
                     run natively.                      Regression test harness.  Can be cross-compiled, but only
                       run natively.  _t_e_s_t_s_/ uses the atf(7) test framework;
      sys/           NetBSD kernel sources.                      _r_e_g_r_e_s_s_/ contains older tests that have not yet been
                       migrated to atf(7).
      tools/         ``Reachover'' build structure for the host build tools.  
                     This has a special method of determining out-of-date sta-       ssyyss//           NetBSD kernel sources.
                     tus.  
        ttoooollss//         ``Reachover'' build structure for the host build tools.
                       This has a special method of determining out-of-date
                       status.
   
      bin/ ... usr.sbin/       bbiinn// ...... uussrr..ssbbiinn//
                     Sources to the NetBSD userland (non-kernel) programs.  If                      Sources to the NetBSD userland (non-kernel) programs.  If
                     any of these directories are missing, they will be skipped                      any of these directories are missing, they will be skipped
                     during the build.                      during the build.
   
      x11/           ``Reachover'' build structure for X11R6; the source is in       xx1111//           ``Reachover'' build structure for X11R6; the source is in
                     X11SRCDIR.                      XX1111SSRRCCDDIIRR.
   
    Build tree layout     BBuuiilldd ttrreeee llaayyoouutt
      The NetBSD build tree is described in hier(7), and the release layout is       The NetBSD build tree is described in hier(7), and the release layout is
      described in release(7).       described in release(7).
   
 CONFIGURATION  CCOONNFFIIGGUURRAATTIIOONN
    Environment variables     EEnnvviirroonnmmeenntt vvaarriiaabblleess
      Several environment variables control the behaviour of NetBSD builds.       Several environment variables control the behaviour of NetBSD builds.
   
      HOST_SH           Path name to a POSIX-compliant shell.  If this is not       HHOOSSTT__SSHH           Path name to a shell available on the host system and
                        set explicitly, then the default is set using heuris-                         suitable for use during the build.  The NetBSD build
                        tics dependent on the host platform, or from the shell                         system requires a modern Bourne-like shell with POSIX-
                        under which build.sh is executed (if that can be deter-                         compliant features, and also requires support for the
                        mined), or using the first copy of sh found in PATH.                         ``local'' keyword to declare local variables in shell
                        If the host system's /bin/sh is not POSIX-compliant, we                         functions (which is a widely-implemented but non-
                        suggest that you build using commands like                         standardised feature).
   
                              HOST_SH=/path/to/working/shell                         Depending on the host system, a suitable shell may be
                              export HOST_SH                         _/_b_i_n_/_s_h, _/_u_s_r_/_x_p_g_4_/_b_i_n_/_s_h, _/_b_i_n_/_k_s_h (provided it is a
                              ${HOST_SH} build.sh [options]                         variant of ksh that supports the ``local'' keyword,
                          such as ksh88, but not ksh93), or _/_u_s_r_/_l_o_c_a_l_/_b_i_n_/_b_a_s_h.
      HOST_CC           Path name to C compiler used to create the toolchain.  
                          Most parts of the build require HHOOSSTT__SSHH to be an
      HOST_CXX          Path name to C++ compiler used to create the toolchain.                         absolute path; however, bbuuiilldd..sshh allows it to be a
                          simple command name, which will be converted to an
      MACHINE           Machine type.                         absolute path by searching the PPAATTHH.
   
      MACHINE_ARCH      Machine architecture.       HHOOSSTT__CCCC           Path name to C compiler used to create the toolchain.
   
      MAKE              Path name to invoke make(1) as.       HHOOSSTT__CCXXXX          Path name to C++ compiler used to create the toolchain.
   
      MAKEFLAGS         Flags to invoke make(1) with.       MMAACCHHIINNEE           Machine type, e.g., ``macppc''.
   
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MMAACCHHIINNEE__AARRCCHH      Machine architecture, e.g., ``powerpc''.
                        tory.  The value is subjected to variable expansion by  
                        make(1).  Used only if MAKEOBJDIRPREFIX is not defined.       MMAAKKEE              Path name to invoke make(1) as.
                        MAKEOBJDIR can only be provided in the environment or  
                        via the -O flag of build.sh.       MMAAKKEEFFLLAAGGSS         Flags to invoke make(1) with.  Note that bbuuiilldd..sshh
                          ignores the value of MMAAKKEEFFLLAAGGSS passed in the
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If                         environment, but allows MMAAKKEEFFLLAAGGSS to be set via the --VV
                        specified, must be an absolute path.  If this is                         option.
                        defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the  
                        .OBJDIR for the current directory.  The current direc-       MMAAKKEEOOBBJJDDIIRR        Directory to use as the ..OOBBJJDDIIRR for the current
                        tory may be read only.  MAKEOBJDIRPREFIX can only be                         directory.  The value is subjected to variable
                        provided in the environment or via the -M flag of                         expansion by make(1).  Typical usage is to set this
                        build.sh.                         variable to a value involving the use of
                          `${.CURDIR:S...}' or `${.CURDIR:C...}', to derive the
    "make" variables                         value of ..OOBBJJDDIIRR from the value of ..CCUURRDDIIRR.  Used only
      Several variables control the behavior of NetBSD builds.  Unless other-                         if MMAAKKEEOOBBJJDDIIRRPPRREEFFIIXX is not defined.  MMAAKKEEOOBBJJDDIIRR can be
      wise specified, these variables may be set in either the process environ-                         provided only in the environment or via the --OO flag of
      ment or the make(1) configuration file specified by MAKECONF.                         bbuuiilldd..sshh; it cannot usefully be set inside a Makefile,
                          including _m_k_._c_o_n_f or $${{MMAAKKEECCOONNFF}}.
   
        MMAAKKEEOOBBJJDDIIRRPPRREEFFIIXX  Top level directory of the object directory tree.  The
                          value is subjected to variable expansion by make(1).
                          bbuuiilldd..sshh will create the ${MAKEOBJDIRPREFIX} directory
                          if necessary, but if make(1) is used without bbuuiilldd..sshh,
                          then rules in <bsd.obj.mk> will abort the build if the
                          ${MAKEOBJDIRPREFIX} directory does not exist.  If the
                          value is defined and valid, then
                          ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the ..OOBBJJDDIIRR
                          for the current directory.  The current directory may
                          be read only.  MMAAKKEEOOBBJJDDIIRRPPRREEFFIIXX can be provided only in
                          the environment or via the --MM flag of bbuuiilldd..sshh; it
                          cannot usefully be set inside a Makefile, including
                          _m_k_._c_o_n_f or $${{MMAAKKEECCOONNFF}}.
   
      ""mmaakkee"" vvaarriiaabblleess
        Several variables control the behavior of NetBSD builds.  Unless
        otherwise specified, these variables may be set in either the process
        environment or the make(1) configuration file specified by MMAAKKEECCOONNFF.
   
      BUILDID     Identifier for the build.  The identifier will be appended to       BBUUIILLDDIIDD     Identifier for the build.  The identifier will be appended to
                  object directory names, and can be consulted in the make(1)                   object directory names, and can be consulted in the make(1)
                  configuration file in order to set additional build parame-                   configuration file in order to set additional build
                  ters, such as compiler flags.                   parameters, such as compiler flags.
   
      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-       BBUUIILLDDSSEEEEDD   GCC uses random numbers when compiling C++ code.  This
                  cial options are passed to the compilation tools to prevent                   variable seeds the gcc random number generator using the
                  their default use of the host system's /usr/include,                   -frandom-seed flag with this value.  By default, it is set to
                  /usr/lib, and so forth.  This pathname must be an absolute                   NetBSD-(majorversion).  Using a fixed value causes C++
                  path, and should not end with a slash (/) character.  (For                   binaries to be the same when built from the same sources,
                  installation into the system's root directory, set DESTDIR to                   resulting in identical (reproducible) builds.  Additional
                    information is available in the GCC documentation of
                    -frandom-seed.
   
        DDEESSTTDDIIRR     Directory to contain the built NetBSD system.  If set,
                    special options are passed to the compilation tools to
                    prevent their default use of the host system's //uussrr//iinncclluuddee,
                    //uussrr//lliibb, and so forth.  This pathname must be an absolute
                    path, and should _n_o_t end with a slash (/) character.  (For
                    installation into the system's root directory, set DDEESSTTDDIIRR to
                  an empty string, not to ``/'').  The directory must reside on                   an empty string, not to ``/'').  The directory must reside on
                  a file system which supports long file names and hard links.                   a file system which supports long file names and hard links.
   
                  Default: Empty string if USETOOLS is ``yes''; unset other-                   _D_e_f_a_u_l_t: Empty string if UUSSEETTOOOOLLSS is ``yes''; unset
                  wise.                   otherwise.
   
                  Note: build.sh will provide a default of destdir.MACHINE (in                   _N_o_t_e: bbuuiilldd..sshh will provide a default of _d_e_s_t_d_i_r_.MMAACCHHIINNEE (in
                  the top-level .OBJDIR) unless run in `expert' mode                   the top-level ..OOBBJJDDIIRR) unless run in `expert' mode.
   
      MAKECONF    The name of the make(1) configuration file.  Only settable in       MMAAKKEECCOONNFF    The name of the make(1) configuration file.  _O_n_l_y _s_e_t_t_a_b_l_e _i_n
                  the process environment.                   _t_h_e _p_r_o_c_e_s_s _e_n_v_i_r_o_n_m_e_n_t_.
   
                  Default: ``/etc/mk.conf''                   _D_e_f_a_u_l_t: ``/etc/mk.conf''
   
      MAKEVERBOSE       MMAAKKEEVVEERRBBOOSSEE
                  Level of verbosity of status messages.  Supported values:                   Level of verbosity of status messages.  Supported values:
   
                  0    No descriptive messages are shown.                   0    No descriptive messages or commands executed by make(1)
                         are shown.
   
                  1    Descriptive messages are shown.                   1    Brief messages are shown describing what is being done,
                         but the actual commands executed by make(1) are not
                         displayed.
   
                  2    Descriptive messages (prefixed with a `#') and command                   2    Descriptive messages are shown as above (prefixed with a
                       output is not suppressed.                        `#'), and ordinary commands performed by make(1) are
                         displayed.
   
                  Default: 2                   3    In addition to the above, all commands performed by
                         make(1) are displayed, even if they would ordinarily
                         have been hidden through use of the ``@'' prefix in the
                         relevant makefile.
   
      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-                   4    In addition to the above, commands executed by make(1)
                  matted plaintext manual pages will be created during a build.                        are traced through use of the sh(1) ``--xx'' flag.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: 2
   
      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-       MMKKCCAATTPPAAGGEESS  Can be set to ``yes'' or ``no''.  Indicates whether
                  graphic code will be included in a build; provided for the                   preformatted plaintext manual pages will be created during a
                  benefit of countries that do not allow strong cryptography.                   build.
                  Will not affect use of the standard low-security password  
                  encryption system, crypt(3).                   _D_e_f_a_u_l_t: ``no''
   
        MMKKCCRRYYPPTTOO    Can be set to ``yes'' or ``no''.  Indicates whether
                    cryptographic code will be included in a build; provided for
                    the benefit of countries that do not allow strong
                    cryptography.  Will not affect use of the standard low-
                    security password encryption system, crypt(3).
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system       MMKKDDOOCC       Can be set to ``yes'' or ``no''.  Indicates whether system
                  documentation destined for DESTDIR/usr/share/doc will be                   documentation destined for DDEESSTTDDIIRR_/_u_s_r_/_s_h_a_r_e_/_d_o_c will be
                  installed during a build.                   installed during a build.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
        MMKKHHTTMMLL      Can be set to ``yes'' or ``no''.  Indicates whether
                    preformatted HTML manual pages will be built and installed
   
                    _D_e_f_a_u_l_t: ``yes''
   
      MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for       MMKKHHOOSSTTOOBBJJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for
                  programs intended to be run on the compile host, the name,                   programs intended to be run on the compile host, the name,
                  release, and architecture of the host operating system will                   release, and architecture of the host operating system will
                  be suffixed to the name of the object directory created by                   be suffixed to the name of the object directory created by
Line 187  CONFIGURATION
Line 237  CONFIGURATION
                  built to be run on the compile host will use the same object                   built to be run on the compile host will use the same object
                  directory names as programs built to be run on the target.                   directory names as programs built to be run on the target.
   
                  Default: ``no''                   _D_e_f_a_u_l_t: ``no''
   
      MKINFO      Can be set to ``yes'' or ``no''.  Indicates whether GNU Info       MMKKIINNFFOO      Can be set to ``yes'' or ``no''.  Indicates whether GNU Info
                  files, used for the documentation for most of the compilation                   files, used for the documentation for most of the compilation
                  tools, will be created and installed during a build.                   tools, will be created and installed during a build.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)       MMKKKKMMOODD      Can be set to ``yes'' or ``no''.  Indicates whether kernel
                    modules are built and installed.
   
                    _D_e_f_a_u_l_t: ``yes''
   
        MMKKLLIINNTT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)
                  will be run against portions of the NetBSD source code during                   will be run against portions of the NetBSD source code during
                  the build, and whether lint libraries will be installed into                   the build, and whether lint libraries will be installed into
                  DESTDIR/usr/libdata/lint.                   DDEESSTTDDIIRR_/_u_s_r_/_l_i_b_d_a_t_a_/_l_i_n_t.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKMAN       Can be set to ``yes'' or ``no''.  Indicates whether manual       MMKKMMAANN       Can be set to ``yes'' or ``no''.  Indicates whether manual
                  pages will be installed during a build.                   pages will be installed during a build.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native       MMKKNNLLSS       Can be set to ``yes'' or ``no''.  Indicates whether Native
                  Language System locale zone files will be compiled and                   Language System locale zone files will be compiled and
                  installed during a build.                   installed during a build.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKOBJ       Can be set to ``yes'' or ``no''.  Indicates whether object       MMKKOOBBJJ       Can be set to ``yes'' or ``no''.  Indicates whether object
                  directories will be created when running ``make obj''.  If                   directories will be created when running ``make obj''.  If
                  set to ``no'', then all built files will be located inside                   set to ``no'', then all built files will be located inside
                  the regular source tree.                   the regular source tree.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared                   Note that setting MMKKOOBBJJ to ``no'' is not recommended and may
                    cause problems when updating the tree with cvs(1).
   
        MMKKPPIICC       Can be set to ``yes'' or ``no''.  Indicates whether shared
                  objects and libraries will be created and installed during a                   objects and libraries will be created and installed during a
                  build.  If set to ``no'', the entire built system will be                   build.  If set to ``no'', the entire built system will be
                  statically linked.                   statically linked.
   
                  Default: Platform dependent.  As of this writing, all plat-                   _D_e_f_a_u_l_t: Platform dependent.  As of this writing, all
                  forms except sh3 default to ``yes''.                   platforms except sshh33 default to ``yes''.
   
      MKPICINSTALL       MMKKPPIICCIINNSSTTAALLLL
                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)                   Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)
                  format libraries (lib*_pic.a), used to generate shared                   format libraries (lliibb**__ppiicc..aa), used to generate shared
                  libraries, are installed during a build.                   libraries, are installed during a build.
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``yes''
   
      MKPROFILE   Can be set to ``yes'' or ``no''.  Indicates whether profiled       MMKKPPRROOFFIILLEE   Can be set to ``yes'' or ``no''.  Indicates whether profiled
                  libraries (lib*_p.a) will be built and installed during a                   libraries (lliibb**__pp..aa) will be built and installed during a
                  build.                   build.
   
                  Default: ``yes''; however, some platforms turn off MKPROFILE                   _D_e_f_a_u_l_t: ``yes''; however, some platforms turn off MMKKPPRROOFFIILLEE
                  by default at times due to toolchain problems with profiled                   by default at times due to toolchain problems with profiled
                  code.                   code.
   
      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files       MMKKRREEPPRROO     Can be set to ``yes'' or ``no''.  Create reproducable builds.
                  destined to reside in DESTDIR/usr/share will be built and                   This enables different switches to make two builds from the
                  installed during a build.  If set to ``no'', then all of                   same source tree result in the same build results.
                  MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to  
                  ``no'' unconditionally.  
   
                  Default: ``yes''                   _D_e_f_a_u_l_t: ``no''
   
      MKTTINTERP  Can be set to ``yes'' or ``no''.  For X builds, decides if       MMKKSSHHAARREE     Can be set to ``yes'' or ``no''.  Indicates whether files
                  the TrueType bytecode interpreter is turned on.  See                   destined to reside in DDEESSTTDDIIRR_/_u_s_r_/_s_h_a_r_e will be built and
                  http://www.freetype.org/patents.html for details.                   installed during a build.  If set to ``no'', then all of
                    MMKKCCAATTPPAAGGEESS, MMKKDDOOCC, MMKKIINNFFOO, MMKKMMAANN, and MMKKNNLLSS will be set to
                    ``no'' unconditionally.
   
                  Default: ``no''                   _D_e_f_a_u_l_t: ``yes''
   
      MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an       MMKKSSTTRRIIPPIIDDEENNTT
                  unprivileged install will occur.  The user, group, permis-                   Can be set to ``yes'' or ``no''.  Indicates whether RCS IDs,
                  sions, and file flags, will not be set on the installed                   for use with ident(1), should be stripped from program
                    binaries and shared libraries.
   
                    _D_e_f_a_u_l_t: ``no''
   
        MMKKUUNNPPRRIIVVEEDD  Can be set to ``yes'' or ``no''.  Indicates whether an
                    unprivileged install will occur.  The user, group,
                    permissions, and file flags, will not be set on the installed
                  items; instead the information will be appended to a file                   items; instead the information will be appended to a file
                  called METALOG in DESTDIR.  The contents of METALOG are used                   called _M_E_T_A_L_O_G in DDEESSTTDDIIRR.  The contents of _M_E_T_A_L_O_G are used
                  during the generation of the distribution tar files to ensure                   during the generation of the distribution tar files to ensure
                  that the appropriate file ownership is stored.                   that the appropriate file ownership is stored.
   
                  Default: ``no''                   _D_e_f_a_u_l_t: ``no''
   
      MKUPDATE    Can be set to ``yes'' or ``no''.  Indicates whether all       MMKKUUPPDDAATTEE    Can be set to ``yes'' or ``no''.  Indicates whether all
                  install operations intended to write to DESTDIR will compare                   install operations intended to write to DDEESSTTDDIIRR will compare
                  file timestamps before installing, and skip the install phase                   file timestamps before installing, and skip the install phase
                  if the destination files are up-to-date.  This also has                   if the destination files are up-to-date.  This also has
                  implications on full builds (see next subsection).                   implications on full builds (see next subsection).
   
                  Default: ``no''                   _D_e_f_a_u_l_t: ``no''
   
      MKX11       Can be set to ``yes'' or ``no''.  Indicates whether X11R6 is       MMKKXX1111       Can be set to ``yes'' or ``no''.  Indicates whether X11 is
                  built from X11SRCDIR.                   built from XX1111SSRRCCDDIIRR.
   
                  Default: ``no''                   _D_e_f_a_u_l_t: ``no''
   
      TOOLDIR     Directory to hold the host tools, once built.  If specified,       TTOOOOLLDDIIRR     Directory to hold the host tools, once built.  If specified,
                  must be an absolute path.  This directory should be unique to                   must be an absolute path.  This directory should be unique to
                  a given host system and NetBSD source tree.  (However, multi-                   a given host system and NetBSD source tree.  (However,
                  ple targets may share the same TOOLDIR; the target-dependent                   multiple targets may share the same TTOOOOLLDDIIRR; the target-
                  files have unique names.)  If unset, a default based on the                   dependent files have unique names.)  If unset, a default
                  uname(1) information of the host platform will be created in                   based on the uname(1) information of the host platform will
                  the .OBJDIR of src.                   be created in the ..OOBBJJDDIIRR of _s_r_c.
   
                  Default: Unset.                   _D_e_f_a_u_l_t: Unset.
   
      USETOOLS    Indicates whether the tools specified by TOOLDIR should be       UUSSEETTOOOOLLSS    Indicates whether the tools specified by TTOOOOLLDDIIRR should be
                  used as part of a build in progress.  Must be set to ``yes''                   used as part of a build in progress.  Must be set to ``yes''
                  if cross-compiling.                   if cross-compiling.
   
                  yes    Use the tools from TOOLDIR.                   yyeess    Use the tools from TTOOOOLLDDIIRR.
   
                  no     Do not use the tools from TOOLDIR, but refuse to build                   nnoo     Do not use the tools from TTOOOOLLDDIIRR, but refuse to build
                         native compilation tool components that are version-                          native compilation tool components that are version-
                         specific for that tool.                          specific for that tool.
   
                  never  Do not use the tools from TOOLDIR, even when building                   nneevveerr  Do not use the tools from TTOOOOLLDDIIRR, even when building
                         native tool components.  This is similar to the tradi-                          native tool components.  This is similar to the
                         tional NetBSD build method, but does not verify that                          traditional NetBSD build method, but does _n_o_t verify
                         the compilation tools in use are up-to-date enough in                          that the compilation tools in use are up-to-date
                         order to build the tree successfully.  This may cause                          enough in order to build the tree successfully.  This
                         build or runtime problems when building the whole                          may cause build or runtime problems when building the
                         NetBSD source tree.                          whole NetBSD source tree.
   
                  Default: ``yes'' if building all or part of a whole NetBSD                   _D_e_f_a_u_l_t: ``yes'', unless TTOOOOLLCCHHAAIINN__MMIISSSSIINNGG is set to ``yes''.
                  source tree (detected automatically); ``no'' otherwise (to  
                  preserve traditional semantics of the <bsd.*.mk> make(1)                   UUSSEETTOOOOLLSS is also set to ``no'' when using <bsd.*.mk> outside
                  include files).                   the NetBSD source tree.
   
      X11SRCDIR   Directory containing the X11R6 source.  If specified, must be       XX1111SSRRCCDDIIRR   Directory containing the X11R6 source.  If specified, must be
                  an absolute path.  The main X11R6 source is found in                   an absolute path.  The main X11R6 source is found in
                  X11SRCDIR/xfree/xc.                   XX1111SSRRCCDDIIRR_/_x_f_r_e_e_/_x_c.
   
                  Default: ``/usr/xsrc''                   _D_e_f_a_u_l_t: NNEETTBBSSDDRRCCDDIIRR_/_._._/_x_s_r_c, if that exists; otherwise
                    _/_u_s_r_/_x_s_r_c.
   
    "make" variables for full builds       XX1111FFLLAAVVOOUURR  The style of X11 cross-built, set to either ``Xorg'' or
                    ``XFree86''.
   
                    _D_e_f_a_u_l_t: ``Xorg'' on amd64, i386, macppc, shark and sparc64
                    platforms, ``XFree86'' on everything else.
   
      ""mmaakkee"" vvaarriiaabblleess ffoorr ffuullll bbuuiillddss
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level ``Makefile'' and do not affect
      manually building subtrees of the NetBSD source code.       manually building subtrees of the NetBSD source code.
   
      INSTALLWORLDDIR  Location for the ``make installworld'' target to install       IINNSSTTAALLLLWWOORRLLDDDDIIRR  Location for the ``make installworld'' target to install
                       to.  If specified, must be an absolute path.                        to.  If specified, must be an absolute path.
   
                       Default: ``/''                        _D_e_f_a_u_l_t: ``/''
   
      MKOBJDIRS        Can be set to ``yes'' or ``no''.  Indicates whether       MMKKOOBBJJDDIIRRSS        Can be set to ``yes'' or ``no''.  Indicates whether
                       object directories will be created automatically (via a                        object directories will be created automatically (via a
                       ``make obj'' pass) at the start of a build.                        ``make obj'' pass) at the start of a build.
   
                       Default: ``no''                        _D_e_f_a_u_l_t: ``no''
   
                         If using bbuuiilldd..sshh, the default is ``yes''.  This may be
                         set back to ``no'' by giving bbuuiilldd..sshh the --oo option.
   
        MMKKUUPPDDAATTEE         Can be set to ``yes'' or ``no''.  If set, then in
                         addition to the effects described for MMKKUUPPDDAATTEE==yyeess
                         above, this implies the effects of NNOOCCLLEEAANNDDIIRR (i.e.,
                         ``make cleandir'' is avoided).
   
      MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in addi-                        _D_e_f_a_u_l_t: ``no''
                       tion to the effects described for MKUPDATE=yes above,  
                       this implies the effects of NOCLEANDIR (i.e., ``make  
                       cleandir'' is avoided).  
   
                       Default: ``no''                        If using bbuuiilldd..sshh, this may be set by giving the --uu
                         option.
   
      NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see       NNBBUUIILLDDJJOOBBSS       Now obsolete.  Use the make(1) option --jj, instead.  See
                       below)                        below.
   
                       Default: Unset.                        _D_e_f_a_u_l_t: Unset.
   
      NOCLEANDIR       If set, avoids the ``make cleandir'' phase of a full       NNOOCCLLEEAANNDDIIRR       If set, avoids the ``make cleandir'' phase of a full
                       build.  This has the effect of allowing only changed                        build.  This has the effect of allowing only changed
                       files in a source tree to be recompiled.  This can speed                        files in a source tree to be recompiled.  This can speed
                       up builds when updating only a few files in the tree.                        up builds when updating only a few files in the tree.
   
                       Default: Unset.                        _D_e_f_a_u_l_t: Unset.
   
      NODISTRIBDIRS    If set, avoids the ``make distrib-dirs'' phase of a full                        See also MMKKUUPPDDAATTEE.
                       build.  This skips running mtree(8) on DESTDIR, useful  
        NNOODDIISSTTRRIIBBDDIIRRSS    If set, avoids the ``make distrib-dirs'' phase of a full
                         build.  This skips running mtree(8) on DDEESSTTDDIIRR, useful
                       on systems where building as an unprivileged user, or                        on systems where building as an unprivileged user, or
                       where it is known that the system-wide mtree files have                        where it is known that the system-wide mtree files have
                       not changed.                        not changed.
   
                       Default: Unset.                        _D_e_f_a_u_l_t: Unset.
   
      NOINCLUDES       If set, avoids the ``make includes'' phase of a full       NNOOIINNCCLLUUDDEESS       If set, avoids the ``make includes'' phase of a full
                       build.  This has the effect of preventing make(1) from                        build.  This has the effect of preventing make(1) from
                       thinking that some programs are out-of-date simply                        thinking that some programs are out-of-date simply
                       because the system include files have changed.  However,                        because the system include files have changed.  However,
                       this option should not be used when updating the entire                        this option should not be used when updating the entire
                       NetBSD source tree arbitrarily; it is suggested to use                        NetBSD source tree arbitrarily; it is suggested to use
                       MKUPDATE=yes in that case.                        MMKKUUPPDDAATTEE==yyeess instead in that case.
   
                       Default: Unset.                        _D_e_f_a_u_l_t: Unset.
   
      RELEASEDIR       If set, specifies the directory to which a release(7)       RREELLEEAASSEEDDIIRR       If set, specifies the directory to which a release(7)
                       layout will be written at the end of a ``make release''.                        layout will be written at the end of a ``make release''.
                       If specified, must be an absolute path.                        If specified, must be an absolute path.
   
                       Default: Unset.                        _D_e_f_a_u_l_t: Unset.
   
                       Note: build.sh will provide a default of releasedir (in                        _N_o_t_e: bbuuiilldd..sshh will provide a default of _r_e_l_e_a_s_e_d_i_r (in
                       the top-level .OBJDIR) unless run in `expert' mode                        the top-level ..OOBBJJDDIIRR) unless run in `expert' mode.
   
 BUILDING  BBUUIILLDDIINNGG
    "make" command line options     ""mmaakkee"" ccoommmmaanndd lliinnee ooppttiioonnss
      This is not a summary of all the options available to make(1); only the       This is not a summary of all the options available to make(1); only the
      options used most frequently with NetBSD builds are listed here.       options used most frequently with NetBSD builds are listed here.
   
      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should       --jj _n_j_o_b    Run up to _n_j_o_b make(1) subjobs in parallel.  Makefiles should
                 use .WAIT or have explicit dependencies as necessary to                  use .WAIT or have explicit dependencies as necessary to
                 enforce build ordering.  If you see build failures with -j,                  enforce build ordering.
                 please save complete build logs so the failures can be ana-  
                 lyzed.       --mm _d_i_r     Specify the default directory for searching for system
                   Makefile segments, mainly the <bsd.*.mk> files.  When building
      -m dir     Specify the default directory for searching for system Make-                  any full NetBSD source tree, this should be set to the
                 file segments, mainly the <bsd.*.mk> files.  When building any                  ``share/mk'' directory in the source tree.  This is set
                 full NetBSD source tree, this should be set to the                  automatically when building from the top level, or when using
                 ``share/mk'' directory in the source tree.  (This is set auto-                  bbuuiilldd..sshh.
                 matically when building from the top level.)  
   
      -n         Display the commands that would have been executed, but do not       --nn         Display the commands that would have been executed, but do not
                 actually execute them.  This will still cause recursion to                  actually execute them.  This will still cause recursion to
                 take place.                  take place.
   
      -V var     Print make(1)'s idea of the value of var.  Does not build any       --VV _v_a_r     Print make(1)'s idea of the value of _v_a_r.  Does not build any
                 targets.                  targets.
   
      var=value  Set the variable var to value, overriding any setting speci-       _v_a_r_=_v_a_l_u_e  Set the variable _v_a_r to _v_a_l_u_e, overriding any setting
                 fied by the process environment, the MAKECONF configuration                  specified by the process environment, the MMAAKKEECCOONNFF
                 file, or the system Makefile segments.                  configuration file, or the system Makefile segments.
   
    "make" targets     ""mmaakkee"" ttaarrggeettss
      These default targets may be built by running make(1) in any subtree of       These default targets may be built by running make(1) in any subtree of
      the NetBSD source code.  It is recommended that none of these be used       the NetBSD source code.  It is recommended that none of these be used
      from the top level Makefile; as a specific exception, ``make obj'' and       from the top level Makefile; as a specific exception, ``make obj'' and
      ``make cleandir'' are useful in that context.       ``make cleandir'' are useful in that context.
   
      all        Build programs, libraries, and preformatted documentation.       aallll        Build programs, libraries, and preformatted documentation.
   
      clean      Remove program and library object code files.       cclleeaann      Remove program and library object code files.
   
      cleandir   Same as clean, but also remove preformatted documentation,       cclleeaannddiirr   Same as cclleeaann, but also remove preformatted documentation,
                 dependency files generated by ``make depend'', and any other                  dependency files generated by ``make depend'', and any other
                 files known to be created at build time.                  files known to be created at build time.
   
      depend     Create dependency files (.depend) containing more detailed       ddeeppeenndd     Create dependency files (..ddeeppeenndd) containing more detailed
                 information about the dependencies of source code on header                  information about the dependencies of source code on header
                 files.  Allows programs to be recompiled automatically when a                  files.  Allows programs to be recompiled automatically when a
                 dependency changes.                  dependency changes.
   
      dependall  Does a ``make depend'' immediately followed by a ``make all''.       ddeeppeennddaallll  Does a ``make depend'' immediately followed by a ``make all''.
                 This improves cache locality of the build since both passes                  This improves cache locality of the build since both passes
                 read the source files in their entirety.                  read the source files in their entirety.
   
      distclean  Synonym for cleandir.       ddiissttcclleeaann  Synonym for cclleeaannddiirr.
   
      includes   Build and install system header files.  Typically needed       iinncclluuddeess   Build and install system header files.  Typically needed
                 before any system libraries or programs can be built.                  before any system libraries or programs can be built.
   
      install    Install programs, libraries, and documentation into DESTDIR.       iinnssttaallll    Install programs, libraries, and documentation into DDEESSTTDDIIRR.
                 Few files will be installed to DESTDIR/dev, DESTDIR/etc,                  Few files will be installed to DDEESSTTDDIIRR_/_d_e_v, DDEESSTTDDIIRR_/_e_t_c,
                 DESTDIR/root or DESTDIR/var in order to prevent user supplied                  DDEESSTTDDIIRR_/_r_o_o_t or DDEESSTTDDIIRR_/_v_a_r in order to prevent user supplied
                 configuration data from being overwritten.                  configuration data from being overwritten.
   
      lint       Run lint(1) against the C source code, where appropriate, and       lliinntt       Run lint(1) against the C source code, where appropriate, and
                 generate system-installed lint libraries.                  generate system-installed lint libraries.
   
      obj        Create object directories to be used for built files, instead       oobbjj        Create object directories to be used for built files, instead
                 of building directly in the source tree.                  of building directly in the source tree.
   
      tags       Create ctags(1) searchable function lists usable by the ex(1)       ttaaggss       Create ctags(1) searchable function lists usable by the ex(1)
                 and vi(1) text editors.                  and vi(1) text editors.
   
    "make" targets for the top level     ""mmaakkee"" ttaarrggeettss ffoorr tthhee ttoopp lleevveell
      Additional make(1) targets are usable specifically from the top source       Additional make(1) targets are usable specifically from the top source
      level to facilitate building the entire NetBSD source tree.       level to facilitate building the entire NetBSD source tree.
   
      build         Build the entire NetBSD system.  This orders portions of       bbuuiilldd         Build the entire NetBSD system (except the kernel).  This
                    the source tree such that prerequisites will be built in                     orders portions of the source tree such that prerequisites
                    the proper order.                     will be built in the proper order.
   
      distribution  Do a ``make build'', and then install a full distribution       ddiissttrriibbuuttiioonn  Do a ``make build'', and then install a full distribution
                    into DESTDIR, including files in DESTDIR/dev, DESTDIR/etc,                     (which does not include a kernel) into DDEESSTTDDIIRR, including
                    DESTDIR/root and DESTDIR/var.                     files in DDEESSTTDDIIRR_/_d_e_v, DDEESSTTDDIIRR_/_e_t_c, DDEESSTTDDIIRR_/_r_o_o_t and
                      DDEESSTTDDIIRR_/_v_a_r.
      buildworld    As per ``make distribution'', except that it ensures that  
                    DESTDIR is not the root directory.       bbuuiillddwwoorrlldd    As per ``make distribution'', except that it ensures that
                      DDEESSTTDDIIRR is not the root directory.
      installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR  
                    (which defaults to the root directory).  Ensures that       iinnssttaallllwwoorrlldd  Install the distribution from DDEESSTTDDIIRR to IINNSSTTAALLLLWWOORRLLDDDDIIRR,
                    INSTALLWORLDDIR is not the root directory if cross compil-                     which defaults to the root directory.  Ensures that
                    ing.                     IINNSSTTAALLLLWWOORRLLDDDDIIRR is not the root directory if cross
                      compiling.
                    The INSTALLSETS environment variable may be set to a list  
                    of distribution sets to be installed.  By default, all sets                     The IINNSSTTAALLLLSSEETTSS environment variable may be set to a space-
                    except ``etc'' and ``xetc'' are installed (so most files in                     separated list of distribution sets to be installed.  By
                    INSTALLWORLDDIR/etc will not be installed or modified).                     default, all sets except ``etc'' and ``xetc'' are
                      installed, so most files in IINNSSTTAALLLLWWOORRLLDDDDIIRR_/_e_t_c will not be
                      installed or modified.
   
                    Note: Before performing this operation with                     _N_o_t_e: Before performing this operation with
                    INSTALLWORLDDIR=/, it is highly recommended that you                     IINNSSTTAALLLLWWOORRLLDDDDIIRR=_/, it is highly recommended that you
                    upgrade your kernel and reboot.  After performing this                     upgrade your kernel and reboot.  After performing this
                    operation, it is recommended that you use etcupdate(8) to                     operation, it is recommended that you use etcupdate(8) to
                    update files in INSTALLWORLDDIR/etc and that you use                     update files in IINNSSTTAALLLLWWOORRLLDDDDIIRR_/_e_t_c, and postinstall(8) to
                    postinstall(8) to check for inconsistencies (and possibly                     check for or fix inconsistencies.
                    to fix them).  
        sseettss          Create distribution sets from DDEESSTTDDIIRR into
      sets          Create distribution sets from DESTDIR into                     RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_b_i_n_a_r_y_/_s_e_t_s.  Should be run
                    RELEASEDIR/MACHINE/binary/sets.  Should be run after ``make                     after ``make distribution'', as ``make build'' alone does
                    distribution'' (as ``make build'' does not install all of                     not install all of the required files.
                    the required files).  
        ssoouurrcceesseettss    Create source sets of the source tree into
      sourcesets    Create source sets of the source tree into                     RREELLEEAASSEEDDIIRR_/_s_o_u_r_c_e_/_s_e_t_s.
                    RELEASEDIR/source/sets.  
        ssyyssppkkggss       Create syspkgs from DDEESSTTDDIIRR into
      syspkgs       Create syspkgs from DESTDIR into                     RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_b_i_n_a_r_y_/_s_y_s_p_k_g_s.  Should be run
                    RELEASEDIR/MACHINE/binary/syspkgs.  Should be run after                     after ``make distribution'', as ``make build'' alone does
                    ``make distribution'' (as ``make build'' does not install                     not install all of the required files.
                    all of the required files).  
   
      release       Do a ``make distribution'', build kernels, distribution       rreelleeaassee       Do a ``make distribution'', build kernels, distribution
                    media, and install sets (this as per ``make sets''), and                     media, and install sets (this as per ``make sets''), and
                    then package the system into a standard release layout as                     then package the system into a standard release layout as
                    described by release(7).  This requires that RELEASEDIR be                     described by release(7).  This requires that RREELLEEAASSEEDDIIRR be
                    set (see above).                     set (see above).
   
      iso-image     Create a NetBSD installation CD-ROM image in the       iissoo--iimmaaggee     Create a NetBSD installation CD-ROM image in the
                    RELEASEDIR/iso directory.  The CD-ROM file system will have                     RREELLEEAASSEEDDIIRR_/_i_s_o directory.  The CD-ROM file system will have
                    a layout as described in release(7).                     a layout as described in release(7).
   
                    For most machine types, the CD-ROM will be bootable, and                     For most machine types, the CD-ROM will be bootable, and
                    will automatically run the sysinst(8) menu-based installa-                     will automatically run the sysinst(8) menu-based
                    tion program, which can be used to install or upgrade a                     installation program, which can be used to install or
                    NetBSD system.  Bootable CD-ROMs also contain tools that                     upgrade a NetBSD system.  Bootable CD-ROMs also contain
                    may be useful in repairing a damaged NetBSD installation.                     tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                    Before ``make iso-image'' is attempted, RELEASEDIR must be                     Before ``make iso-image'' is attempted, RELEASEDIR must be
                    populated by ``make release'' or equivalent.                     populated by ``make release'' or equivalent.
   
                    Note that other, smaller, CD-ROM images may be created in                     Note that other, smaller, CD-ROM images may be created in
                    the RELEASEDIR/MACHINE/installation/cdrom directory by                     the RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_i_n_s_t_a_l_l_a_t_i_o_n_/_c_d_r_o_m
                    ``make release''.  These smaller images usually contain the                     directory by ``make release''.  These smaller images
                    same tools as the larger images in RELEASEDIR/iso, but do                     usually contain the same tools as the larger images in
                    not contain additional content such as the distribution                     RREELLEEAASSEEDDIIRR_/_i_s_o, but do not contain additional content such
                    sets.                     as the distribution sets.
   
                    Note that the mac68k port still uses an older method of                     Note that the mac68k port still uses an older method of
                    creating CD-ROM images.  This requires the mkisofs(1) util-                     creating CD-ROM images.  This requires the mkisofs(1)
                    ity, which is not part of NetBSD, but which can be                     utility, which is not part of NetBSD, but which can be
                    installed from pkgsrc/sysutils/cdrtools.                     installed from _p_k_g_s_r_c_/_s_y_s_u_t_i_l_s_/_c_d_r_t_o_o_l_s.
   
      iso-image-source       iissoo--iimmaaggee--ssoouurrccee
                    Create a NetBSD installation CD-ROM image in the                     Create a NetBSD installation CD-ROM image in the
                    RELEASEDIR/iso directory.  The CD-ROM file system will have                     RREELLEEAASSEEDDIIRR_/_i_s_o directory.  The CD-ROM file system will have
                    a layout as described in release(7).  It will have top                     a layout as described in release(7).  It will have top
                    level directories for the machine type and source.                     level directories for the machine type and source.
   
                    For most machine types, the CD-ROM will be bootable, and                     For most machine types, the CD-ROM will be bootable, and
                    will automatically run the sysinst(8) menu-based installa-                     will automatically run the sysinst(8) menu-based
                    tion program, which can be used to install or upgrade a                     installation program, which can be used to install or
                    NetBSD system.  Bootable CD-ROMs also contain tools that                     upgrade a NetBSD system.  Bootable CD-ROMs also contain
                    may be useful in repairing a damaged NetBSD installation.                     tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                    Before ``make iso-image-source'' is attempted, RELEASEDIR                     Before ``make iso-image-source'' is attempted, RELEASEDIR
                    must be populated by ``make sourcesets release'' or equiva-                     must be populated by ``make sourcesets release'' or
                    lent.                     equivalent.
   
                    Note that other, smaller, CD-ROM images may be created in                     Note that other, smaller, CD-ROM images may be created in
                    the RELEASEDIR/MACHINE/installation/cdrom directory by                     the RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_i_n_s_t_a_l_l_a_t_i_o_n_/_c_d_r_o_m
                    ``make release''.  These smaller images usually contain the                     directory by ``make release''.  These smaller images
                    same tools as the larger images in RELEASEDIR/iso, but do                     usually contain the same tools as the larger images in
                    not contain additional content such as the distribution                     RREELLEEAASSEEDDIIRR_/_i_s_o, but do not contain additional content such
                    sets.                     as the distribution sets.
   
                    Note that the mac68k port still uses an older method of                     Note that the mac68k port still uses an older method of
                    creating CD-ROM images.  This requires the mkisofs(1) util-                     creating CD-ROM images.  This requires the mkisofs(1)
                    ity, which is not part of NetBSD, but which can be                     utility, which is not part of NetBSD, but which can be
                    installed from pkgsrc/sysutils/cdrtools.                     installed from _p_k_g_s_r_c_/_s_y_s_u_t_i_l_s_/_c_d_r_t_o_o_l_s.
   
        iinnssttaallll--iimmaaggee
                      Create a bootable NetBSD installation disk image in the
                      RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_i_n_s_t_a_l_l_a_t_i_o_n_/_i_n_s_t_a_l_l_i_m_a_g_e
                      directory.  The installation disk image is suitable for
                      copying to bootable USB flash memory sticks, etc., for
                      machines which are able to boot from such devices.  The
                      file system in the bootable disk image will have a layout
                      as described in release(7).
   
                      The installation image is bootable, and will automatically
                      run the sysinst(8) menu-based installation program, which
                      can be used to install or upgrade a NetBSD system.  The
                      image also contains tools that may be useful in repairing a
                      damaged NetBSD installation.
   
                      Before ``make install-image'' is attempted, RREELLEEAASSEEDDIIRR must
                      be populated by ``make release'' or equivalent.  The build
                      must have been performed with MMKKUUNNPPRRIIVVEEDD==yyeess because ``make
                      install-image'' relies on information in DDEESSTTDDIIRR_/_M_E_T_A_L_O_G.
   
        live-image    Create NetBSD live images in the
                      RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_i_n_s_t_a_l_l_a_t_i_o_n_/_l_i_v_e_i_m_a_g_e
                      directory.  The live image contains all necessary files to
                      boot NetBSD up to multi-user mode, including all files
                      which should be extracted during installation, NetBSD
                      disklabel, bootloaders, etc.
   
                      The live image is suitable for use as a disk image in
                      virtual machine environments such as QEMU, and also useful
                      to boot NetBSD from a USB flash memory stick on a real
                      machine, without the need for installation.
   
                      Before ``make live-image'' is attempted, RELEASEDIR must be
                      populated by ``make release'' or equivalent.  The build
                      must have been performed with MMKKUUNNPPRRIIVVEEDD==yyeess because ``make
                      install-image'' relies on information in DDEESSTTDDIIRR_/_M_E_T_A_L_O_G.
   
      regression-tests       rreeggrreessssiioonn--tteessttss
                    Can only be run after building the regression tests in the                     Can only be run after building the regression tests in the
                    directory ``regress''.  Runs the compiled regression tests                     directory ``regress''.  Runs those compiled regression
                    on the local host.                     tests on the local host.  Note that most tests are now
                      managed instead using atf(7); this target should probably
    The "build.sh" script                     run those as well but currently does not.
      This script file is a Bourne shell script designed to build the entire  
      NetBSD system on any host with a Bourne shell in /bin/sh, including many     TThhee ""bbuuiilldd..sshh"" ssccrriipptt
      that are not POSIX compliant.  Note that if a host system's /bin/sh is       This script file is a shell script designed to build the entire NetBSD
      unusually old and broken, the Korn Shell (/bin/ksh), if available, may be       system on any host with a suitable modern shell and some common
      a usable alternative.       utilities.  The required shell features are described under the HHOOSSTT__SSHH
        variable.
   
        If a host system's default shell does support the required features, then
        we suggest that you explicitly specify a suitable shell using a command
        like
   
              /path/to/suitable/shell build.sh [_o_p_t_i_o_n_s]
   
        The above command will usually enable bbuuiilldd..sshh to automatically set
        HHOOSSTT__SSHH==_/_p_a_t_h_/_t_o_/_s_u_i_t_a_b_l_e_/_s_h_e_l_l, but if that fails, then the following
        set of commands may be used instead:
   
              HOST_SH=_/_p_a_t_h_/_t_o_/_s_u_i_t_a_b_l_e_/_s_h_e_l_l
              export HOST_SH
              ${HOST_SH} build.sh [_o_p_t_i_o_n_s]
   
        If bbuuiilldd..sshh detects that it is being executed under an unsuitable shell,
        it attempts to exec a suitable shell instead, or prints an error message.
        If HHOOSSTT__SSHH is not set explicitly, then bbuuiilldd..sshh sets a default using
        heuristics dependent on the host platform, or from the shell under which
        bbuuiilldd..sshh is executed (if that can be determined), or using the first copy
        of _s_h found in PPAATTHH.
   
      All cross-compile builds, and most native builds, of the entire system       All cross-compile builds, and most native builds, of the entire system
      should make use of build.sh rather than just running ``make''.  This way,       should make use of bbuuiilldd..sshh rather than just running ``make''.  This way,
      the make(1) program will be bootstrapped properly, in case the host sys-       the make(1) program will be bootstrapped properly, in case the host
      tem has an older or incompatible ``make'' program.       system has an older or incompatible ``make'' program.
   
      When compiling the entire system via build.sh, many make(1) variables are       When compiling the entire system via bbuuiilldd..sshh, many make(1) variables are
      set for you in order to help encapsulate the build process.  In the list       set for you in order to help encapsulate the build process.  In the list
      of options below, variables that are automatically set by build.sh are       of options below, variables that are automatically set by bbuuiilldd..sshh are
      noted where applicable.       noted where applicable.
   
      The following operations are supported by build.sh:       The following operations are supported by bbuuiilldd..sshh:
   
        bbuuiilldd         Build the system as per ``make build''.  Before the main
                      part of the build commences, this command runs the oobbjj
                      operation (unless the --oo option is given), ``make
                      cleandir'' (unless the --uu option is given), and the ttoooollss
                      operation.
   
      build         Build the system as per ``make build''.  This option       ddiissttrriibbuuttiioonn  Build a full distribution as per ``make distribution''.
                    implies the obj and tools operations.                     This command first runs the bbuuiilldd operation.
   
      distribution  Build a full distribution as per ``make distribution''.       rreelleeaassee       Build a full release as per ``make release''.  This command
                    This option implies the build operation.                     first runs the ddiissttrriibbuuttiioonn operation.
   
      release       Build a full release as per ``make release''.  This option       mmaakkeewwrraappppeerr   Create the nnbbmmaakkee--MMAACCHHIINNEE wrapper.  This operation is
                    implies the distribution operation.                     automatically performed for any of the other operations.
   
      makewrapper   Create the nbmake-MACHINE wrapper.  This operation is auto-       cclleeaannddiirr      Perform ``make cleandir''.
                    matically performed for any of the other operations.  
   
      obj           Perform ``make obj''.       oobbjj           Perform ``make obj''.
   
      tools         Build and install the host tools from src/tools.       ttoooollss         Build and install the host tools from _s_r_c_/_t_o_o_l_s.  This
                      command will first run ``make obj'' and ``make cleandir''
                      in the _t_o_o_l_s subdirectory unless the --oo or --uu options
                      (respectively) are given.
   
      install=idir  Install the contents of DESTDIR to idir, using ``make       iinnssttaallll=_i_d_i_r  Install the contents of DDEESSTTDDIIRR to _i_d_i_r, using ``make
                    installworld''.  Note that files that are part of the                     installworld''.  Note that files that are part of the
                    ``etc'' or ``xetc'' sets will not be installed.                     ``etc'' or ``xetc'' sets will not be installed, unless
                      overridden by the INSTALLSETS environment variable.
   
      kernel=kconf  Build a new kernel.  The kconf argument is the name of a       kkeerrnneell=_k_c_o_n_f  Build a new kernel.  The _k_c_o_n_f argument is the name of a
                    configuration file suitable for use by config(1).  If kconf                     configuration file suitable for use by config(1).  If _k_c_o_n_f
                    does not contain any `/' characters, the configuration file                     does not contain any `/' characters, the configuration file
                    is expected to be found in the KERNCONFDIR directory, which                     is expected to be found in the KKEERRNNCCOONNFFDDIIRR directory, which
                    is typically sys/arch/MACHINE/conf.  The new kernel will be                     is typically ssyyss//aarrcchh//MMAACCHHIINNEE//ccoonnff.  The new kernel will be
                    built in a subdirectory of KERNOBJDIR, which is typically                     built in a subdirectory of KKEERRNNOOBBJJDDIIRR, which is typically
                    sys/arch/MACHINE/compile or an associated object directory.                     ssyyss//aarrcchh//MMAACCHHIINNEE//ccoommppiillee or an associated object directory.
                    In order to ensure that the kernel is built using up-to-  
                    date tools, it is strongly recommended that the tools be  
                    rebuilt (using the tools operation).  
   
      releasekernel=kconf                     This command does _n_o_t imply the ttoooollss command; run the
                    Install a gzip(1)ed copy of the kernel built by                     ttoooollss command first unless it is _c_e_r_t_a_i_n that the tools
                    kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually                     already exist and are up to date.
                    as netbsd-kconf.gz, although the ``netbsd'' prefix is  
                    determined from the ``config'' directives in kconf.  
   
      sets          Perform ``make sets''.                     This command will run ``make cleandir'' on the kernel in
                      question first unless the --uu option is given.
   
      sourcesets    Perform ``make sourcesets''.       mmoodduulleess       This command will build kernel modules and install them
                      into DDEESSTTDDIIRR.
   
      syspkgs       Perform ``make syspkgs''.       rreelleeaasseekkeerrnneell=_k_c_o_n_f
                      Install a gzip(1)ed copy of the kernel previously built by
                      kkeerrnneell=_k_c_o_n_f into
                      RREELLEEAASSEEDDIIRR//RREELLEEAASSEEMMAACCHHIINNEEDDIIRR_/_b_i_n_a_r_y_/_k_e_r_n_e_l, usually as
                      _n_e_t_b_s_d_-_k_c_o_n_f_._g_z, although the ``_n_e_t_b_s_d'' prefix is
                      determined from the ``ccoonnffiigg'' directives in _k_c_o_n_f.
   
      iso-image     Perform ``make iso-image''.       sseettss          Perform ``make sets''.
   
      iso-image-source       ssoouurrcceesseettss    Perform ``make sourcesets''.
   
        ssyyssppkkggss       Perform ``make syspkgs''.
   
        iissoo--iimmaaggee     Perform ``make iso-image''.
   
        iissoo--iimmaaggee--ssoouurrccee
                    Perform ``make iso-image-source''.                     Perform ``make iso-image-source''.
   
      The following command line options alter the behaviour of the build.sh       iinnssttaallll--iimmaaggee
                      Perform ``make install-image''.
   
        lliivvee--iimmaaggee    Perform ``make live-image''.
   
        The following command line options alter the behaviour of the bbuuiilldd..sshh
      operations described above:       operations described above:
   
      -a arch   Set the value of MACHINE_ARCH to arch.       --aa _a_r_c_h   Set the value of MMAACCHHIINNEE__AARRCCHH to _a_r_c_h.
   
      -B buildid       --BB _b_u_i_l_d_i_d
                Set the value of BUILDID to buildid.  This will also append the                 Set the value of BBUUIILLDDIIDD to _b_u_i_l_d_i_d.  This will also append the
                build idenfitier to the name of the ``make'' wrapper script so                 build identifier to the name of the ``make'' wrapper script so
                that the resulting name is of the form                 that the resulting name is of the form
                ``nbmake-MACHINE-BUILDID''.                 ``nnbbmmaakkee--MMAACCHHIINNEE--BBUUIILLDDIIDD''.
   
        --CC _c_d_e_x_t_r_a_s
                  Append _c_d_e_x_t_r_a_s to the CCDDEEXXTTRRAA variable, which is a space-
                  separated list of files or directories that will be added to
                  the CD-ROM image that may be create by the ``iso-image'' or
                  ``iso-image-source'' operations.  Files will be added to the
                  root of the CD-ROM image, whereas directories will be copied
                  recursively.  If relative paths are specified, they will be
                  converted to absolute paths before being used.  Multiple paths
                  may be specified via multiple --CC options, or via a single
                  option whose argument contains multiple space-separated paths.
   
        --DD _d_e_s_t   Set the value of DDEESSTTDDIIRR to _d_e_s_t.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -C cddir  Set the value of CDEXTRA to cddir.  If a relative path is spec-       --EE        Set `expert' mode.  This overrides various sanity checks, and
                ified, it will be converted to an absolute path before being                 allows: DDEESSTTDDIIRR does not have to be set to a non-root path for
                used.  When combined with ``iso-image'' or                 builds, and MMKKUUNNPPRRIIVVEEDD==yyeess does not have to be set when
                ``iso-image-source'', it will cause the contents of cddir to be                 building as a non-root user.
                added to the CD-ROM image.  
   
      -D dest   Set the value of DESTDIR to dest.  If a relative path is speci-  
                fied, it will be converted to an absolute path before being  
                used.  
   
      -E        Set `expert' mode.  This overrides various sanity checks, and  
                allows: DESTDIR does not have to be set to a non-root path for  
                builds, and MKUNPRIVED=yes does not have to be set when build-  
                ing as a non-root user.  
   
                Note: It is highly recommended that you know what you are doing                 _N_o_t_e: It is highly recommended that you know what you are doing
                when you use this option.                 when you use this option.
   
      -h        Print a help message.       --hh        Print a help message.
   
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have       --jj _n_j_o_b   Run up to _n_j_o_b make(1) subjobs in parallel; passed through to
                explicit dependancies as necessary to enforce build ordering.                 make(1).  If you see failures for reasons other than running
                If you see build failures with -j, please save complete build                 out of memory while using bbuuiilldd..sshh with --jj, please save
                logs so the failures can be analyzed.                 complete build logs so the failures can be analyzed.
   
      -M obj    Set MAKEOBJDIRPREFIX to obj.  If a relative path is specified,                 To achieve the fastest builds, --jj values between (1 + the
                it will be converted to an absolute path before being used.                 number of CPUs) and (2 * the number of CPUs) are recommended.
                Unsets MAKEOBJDIR.                 Use lower values on machines with limited memory or I/O
                  bandwidth.
   
        --MM _o_b_j    Set MMAAKKEEOOBBJJDDIIRRPPRREEFFIIXX to _o_b_j.  Unsets MMAAKKEEOOBBJJDDIIRR.  See ``--OO
                  --oobbjj'' for more information.
   
                  For instance, if the source directory is _/_u_s_r_/_s_r_c, a setting of
                  ``--MM _/_u_s_r_/_o_b_j'' will place build-time files under
                  _/_u_s_r_/_o_b_j_/_u_s_r_/_s_r_c_/_b_i_n, _/_u_s_r_/_o_b_j_/_u_s_r_/_s_r_c_/_l_i_b,
                  _/_u_s_r_/_o_b_j_/_u_s_r_/_s_r_c_/_u_s_r_._b_i_n, and so forth.
   
                  If a relative path is specified, it will be converted to an
                  absolute path before being used.  bbuuiilldd..sshh imposes the
                  restriction that the argument to the --MM option must not begin
                  with a ``$'' (dollar sign) character; otherwise it would be too
                  difficult to determine whether the value is an absolute or a
                  relative path.  If the directory does not already exist,
                  bbuuiilldd..sshh will create it.
   
      -m mach   Set the value of MACHINE to mach, except in some special cases       --mm _m_a_c_h   Set the value of MMAACCHHIINNEE to _m_a_c_h, except in some special cases
                listed below.  This will also override any value of                 listed below.  This will also override any value of
                MACHINE_ARCH in the process environment with a value deduced                 MMAACCHHIINNEE__AARRCCHH in the process environment with a value deduced
                from mach, unless -a is specified.  All cross builds require                 from _m_a_c_h, unless --aa is specified.  All cross builds require
                -m, but if unset on a NetBSD host, the host's value of MACHINE                 --mm, but if unset on a NetBSD host, the host's value of MACHINE
                will be detected and used automatically.                 will be detected and used automatically.
   
                Some machines support multiple values for MACHINE_ARCH.  The                 Some machines support multiple values for MMAACCHHIINNEE__AARRCCHH.  The
                following special cases for the mach argument are defined to                 following special cases for the _m_a_c_h argument are defined to
                set the listed values of MACHINE and MACHINE_ARCH:                 set the listed values of MMAACCHHIINNEE and MMAACCHHIINNEE__AARRCCHH:
   
                      mach          MACHINE    MACHINE_ARCH                       mmaacchh          MMAACCHHIINNEE    MMAACCHHIINNEE__AARRCCHH
                      evbarm        evbarm     (not set)                       evbarm        evbarm     (not set)
                      evbarm-eb     evbarm     armeb                       evbarm-eb     evbarm     armeb
                      evbarm-el     evbarm     arm                       evbarm-el     evbarm     arm
Line 692  BUILDING
Line 877  BUILDING
                      sbmips-eb     sbmips     mipseb                       sbmips-eb     sbmips     mipseb
                      sbmips-el     sbmips     mipsel                       sbmips-el     sbmips     mipsel
   
      -N noiselevel       --NN _n_o_i_s_e_l_e_v_e_l
                Set the ``noisyness'' level of the build, by setting                 Set the ``noisyness'' level of the build, by setting
                MAKEVERBOSE to noiselevel.                 MMAAKKEEVVEERRBBOOSSEE to _n_o_i_s_e_l_e_v_e_l.
   
      -n        Show the commands that would be executed by build.sh, but do       --nn        Show the commands that would be executed by bbuuiilldd..sshh, but do
                not make any changes.  This is similar in concept to ``make                 not make any changes.  This is similar in concept to ``make
                -n''.                 -n''.
   
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will       --OO _o_b_j    Create an appropriate transform macro for MMAAKKEEOOBBJJDDIIRR that will
                place the built object files under obj.  If a relative path is                 place the built object files under _o_b_j.  Unsets
                specified, it will be converted to an absolute path before                 MMAAKKEEOOBBJJDDIIRRPPRREEFFIIXX.
                being used.  For instance, a setting of /usr/obj will place  
                build-time files under /usr/obj/bin, /usr/obj/lib,                 For instance, a setting of ``--OO _/_u_s_r_/_o_b_j'' will place build-
                /usr/obj/usr.bin, and so forth.  Unsets MAKEOBJDIRPREFIX.                 time files under _/_u_s_r_/_o_b_j_/_b_i_n, _/_u_s_r_/_o_b_j_/_l_i_b, _/_u_s_r_/_o_b_j_/_u_s_r_._b_i_n,
                  and so forth.
      -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be  
                automatically set to ``yes'' (which is opposite to the default                 If a relative path is specified, it will be converted to an
                behaviour).                 absolute path before being used.  bbuuiilldd..sshh imposes the
                  restriction that the argument to the --OO option must not contain
                  a ``$'' (dollar sign) character.  If the directory does not
                  already exist, bbuuiilldd..sshh will create it.
   
                  In normal use, exactly one of the --MM or --OO options should be
                  specified.  If neither --MM nor --OO is specified, then a default
                  object directory will be chosen according to rules in
                  <bsd.obj.mk>.  Relying on this default is not recommended
                  because it is determined by complex rules that are influenced
                  by the values of several variables and by the location of the
                  source directory.
   
        --oo        Set the value of MMKKOOBBJJDDIIRRSS to ``no''.  Otherwise, it will be
                  automatically set to ``yes''.  This default is opposite to the
                  behaviour when not using bbuuiilldd..sshh.
   
      -R rel    Set the value of RELEASEDIR to rel.  If a relative path is       --RR _r_e_l    Set the value of RREELLEEAASSEEDDIIRR to _r_e_l.  If a relative path is
                specified, it will be converted to an absolute path before                 specified, it will be converted to an absolute path before
                being used.                 being used.
   
      -r        Remove the contents of DESTDIR and TOOLDIR before building       --rr        Remove the contents of DDEESSTTDDIIRR and TTOOOOLLDDIIRR before building
                (provides a clean starting point).  This will skip deleting                 (provides a clean starting point).  This will skip deleting
                DESTDIR if building on a native system to the root directory.                 DDEESSTTDDIIRR if building on a native system to the root directory.
   
        --SS _s_e_e_d   Change the value of BBUUIILLDDSSEEEEDD to _s_e_e_d.  This should rarely be
                  necessary.
   
      -T tools  Set the value of TOOLDIR to tools.  If a relative path is spec-       --TT _t_o_o_l_s  Set the value of TTOOOOLLDDIIRR to _t_o_o_l_s.  If a relative path is
                ified, it will be converted to an absolute path before being                 specified, it will be converted to an absolute path before
                used.  If set, the bootstrap ``make'' will only be rebuilt as                 being used.  If set, the bootstrap ``make'' will only be
                needed (when the source files for make(1) change).                 rebuilt if the source files for make(1) have changed.
   
      -U        Set MKUNPRIVED=yes.       --UU        Set MMKKUUNNPPRRIIVVEEDD==yyeess.
   
      -u        Set MKUPDATE=yes.       --uu        Set MMKKUUPPDDAATTEE==yyeess.
   
      -V var=[value]       --VV _v_a_r=[_v_a_l_u_e]
                Set the environment variable var to an optional value.  This is                 Set the environment variable _v_a_r to an optional _v_a_l_u_e.  This is
                propagated to the nbmake wrapper.                 propagated to the nnbbmmaakkee wrapper.
   
      -w wrapper       --ww _w_r_a_p_p_e_r
                Create the nbmake wrapper script (see below) in a custom loca-                 Create the nnbbmmaakkee wrapper script (see below) in a custom
                tion, specified by wrapper.  This allows, for instance, to                 location, specified by _w_r_a_p_p_e_r.  This allows, for instance, to
                place the wrapper in PATH automatically.  Note that wrapper is                 place the wrapper in PPAATTHH automatically.  Note that _w_r_a_p_p_e_r is
                the full name of the file, not just a directory name.  If a                 the full name of the file, not just a directory name.  If a
                relative path is specified, it will be converted to an absolute                 relative path is specified, it will be converted to an absolute
                path before being used.                 path before being used.
   
      -X x11src       --XX _x_1_1_s_r_c
                Set the value of X11SRCDIR to x11src.  If a relative path is                 Set the value of XX1111SSRRCCDDIIRR to _x_1_1_s_r_c.  If a relative path is
                specified, it will be converted to an absolute path before                 specified, it will be converted to an absolute path before
                being used.                 being used.
   
      -x        Set MKX11=yes.       --xx        Set MMKKXX1111==yyeess.
   
      -Z var    Unset ("zap") the environment variable var.  This is propagated       --ZZ _v_a_r    Unset ("zap") the environment variable _v_a_r.  This is propagated
                to the nbmake wrapper.                 to the nnbbmmaakkee wrapper.
   
    The "nbmake-MACHINE" wrapper script     TThhee ""nnbbmmaakkee--MMAACCHHIINNEE"" wwrraappppeerr ssccrriipptt
      If using the build.sh script to build NetBSD, a nbmake-MACHINE script       If using the bbuuiilldd..sshh script to build NetBSD, a nnbbmmaakkee--MMAACCHHIINNEE script
      will be created in TOOLDIR/bin upon the first build to assist in building       will be created in TTOOOOLLDDIIRR//bbiinn upon the first build to assist in building
      subtrees on a cross-compile host.       subtrees on a cross-compile host.
   
      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call       nnbbmmaakkee--MMAACCHHIINNEE can be invoked in lieu of make(1), and will instead call
      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-       the up-to-date version of ``nbmake'' installed into TTOOOOLLDDIIRR//bbiinn with
      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.       several key variables pre-set, including MMAACCHHIINNEE, MMAACCHHIINNEE__AARRCCHH, and
      build.sh will also set variables specified with -V, and unset variables       TTOOOOLLDDIIRR.  nnbbmmaakkee--MMAACCHHIINNEE will also set variables specified with --VV, and
      specified with -Z.       unset variables specified with --ZZ.
   
      This script can be symlinked into a directory listed in PATH, or called       This script can be symlinked into a directory listed in PPAATTHH, or called
      with an absolute path.       with an absolute path.
   
 EXAMPLES  EEXXAAMMPPLLEESS
      1.   % ./build.sh tools kernel=GENERIC       1.   % ./build.sh [options] tools kernel=GENERIC
   
           Build a new toolchain, and use the new toolchain to configure and            Build a new toolchain, and use the new toolchain to configure and
           build a new GENERIC kernel.            build a new GENERIC kernel.
   
      2.   % ./build.sh -U distribution       2.   % ./build.sh [options] -U distribution
   
           Using unprivileged mode, build a complete distribution to a DESTDIR            Using unprivileged mode, build a complete distribution to a DDEESSTTDDIIRR
           directory that build.sh selects (and will display).            directory that bbuuiilldd..sshh selects (and will display).
   
      3.   # ./build.sh -U install=/       3.   # ./build.sh [options] -U install=/
   
           As root, install to / the distribution that was built by example 2.            As root, install to _/ the distribution that was built by example 2.
           Even though this is run as root, -U is required so that the permis-            Even though this is run as root, --UU is required so that the
           sions stored in DESTDIR/METALOG are correctly applied to the files            permissions stored in DDEESSTTDDIIRR_/_M_E_T_A_L_O_G are correctly applied to the
           as they're copied to /.            files as they're copied to _/.
   
      4.   % ./build.sh -U -u release       4.   % ./build.sh [options] -U -u release
   
           Using unprivileged mode, build a complete release to DESTDIR and            Using unprivileged mode, build a complete release to DDEESSTTDDIIRR and
           RELEASEDIR directories that build.sh selects (and will display).            RREELLEEAASSEEDDIIRR directories that bbuuiilldd..sshh selects (and will display).
           MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that            MMKKUUPPDDAATTEE==yyeess (--uu) is set to prevent the ``make cleandir'', so that
           if this is run after example 2, it doesn't need to redo that portion            if this is run after example 2, it doesn't need to redo that portion
           of the release build.            of the release build.
   
 OBSOLETE VARIABLES  OOBBSSOOLLEETTEE VVAARRIIAABBLLEESS
      NBUILDJOBS  Use the make(1) option -j, instead.       NNBBUUIILLDDJJOOBBSS  Use the make(1) option --jj instead.
   
      USE_NEW_TOOLCHAIN       UUSSEE__NNEEWW__TTOOOOLLCCHHAAIINN
                  The new toolchain is now the default.  To disable, use                   The new toolchain is now the default.  To disable, use
                  TOOLCHAIN_MISSING=yes.                   TTOOOOLLCCHHAAIINN__MMIISSSSIINNGG==yyeess.
   
 SEE ALSO  SSEEEE AALLSSOO
      make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),       make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),
      pkgsrc/sysutils/cdrtools       _p_k_g_s_r_c_/_s_y_s_u_t_i_l_s_/_c_d_r_t_o_o_l_s
   
 HISTORY  
      The build.sh based build scheme was introduced for NetBSD 1.6 as  
      USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.  
   
 BUGS  HHIISSTTOORRYY
      A few platforms are not yet using this build system.       The bbuuiilldd..sshh based build scheme was introduced for NetBSD 1.6 as
        UUSSEE__NNEEWW__TTOOOOLLCCHHAAIINN, and re-worked to TTOOOOLLCCHHAAIINN__MMIISSSSIINNGG after that.
   
 NetBSD                         September 1, 2007                        NetBSD  NetBSD                         November 8, 2012                         NetBSD

Legend:
Removed from v.1.66  
changed lines
  Added in v.1.104

CVSweb <webmaster@jp.NetBSD.org>