[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.44 and 1.62.4.3

version 1.44, 2003/09/29 07:58:01 version 1.62.4.3, 2008/03/23 00:12:06
Line 1 
Line 1 
 BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)  BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)
   
 NAME  NAME
      BUILDING - Procedure for building NetBSD from source code.       BUILDING -- Procedure for building NetBSD from source code.
   
 STATUS  
      This document is a work-in-progress.  As such, the information described  
      here may not match the reality of the build system as of this writing.  
      Once this document is completely in sync with reality, this paragraph  
      will be removed.  
   
      Discrepancies between this documentation and the current reality of  
      implementation are noted specially, as with the note below:  
   
      Note: This document applies only to platforms which use the new toolchain  
      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.  
      Platforms which have not yet been switched to the new toolchain should  
      continue building traditionally, using the notes specified in the file  
      UPDATING.  
   
 REQUIREMENTS  REQUIREMENTS
      NetBSD is designed to be buildable on most POSIX-compliant host systems.       NetBSD is designed to be buildable on most POSIX-compliant host systems.
Line 28  REQUIREMENTS
Line 13  REQUIREMENTS
      host system to create a build toolchain for the target architecture.  The       host system to create a build toolchain for the target architecture.  The
      host system must have at least C and C++ compilers in order to create the       host system must have at least C and C++ compilers in order to create the
      toolchain (make is not required); all other tools are created as part of       toolchain (make is not required); all other tools are created as part of
      the NetBSD build process.       the NetBSD build process.  (See the environment variables section below
        if you need to override or manually select your compilers.)
            Note: A couple of host toolchain components are not yet available  
            in the tools directory.  Also, some tools use non-POSIX, non-ANSI C  
            extensions and need to be standardized.  As a result, cross-compil-  
            ing from systems other than NetBSD is not currently supported.  
   
 FILES  FILES
    Source tree layout     Source tree layout
Line 42  FILES
Line 23  FILES
   
      BUILDING       This document (in plaintext).       BUILDING       This document (in plaintext).
   
        tools/compat/README
                       Special notes for cross-hosting a NetBSD build on non-
                       NetBSD platforms.
   
      Makefile       The main Makefile for NetBSD; should only be run for       Makefile       The main Makefile for NetBSD; should only be run for
                     native builds with an appropriately up-to-date version of                      native builds with an appropriately up-to-date version of
                     NetBSD make(1).  (For building from out-of-date systems or                      NetBSD make(1).  (For building from out-of-date systems or
Line 83  FILES
Line 68  FILES
                     any of these directories are missing, they will be skipped                      any of these directories are missing, they will be skipped
                     during the build.                      during the build.
   
        x11/           ``Reachover'' build structure for X11R6; the source is in
                       X11SRCDIR.
   
    Build tree layout     Build tree layout
      The NetBSD build tree is described in hier(7), and the release layout is       The NetBSD build tree is described in hier(7), and the release layout is
      described in release(7).       described in release(7).
Line 91  CONFIGURATION
Line 79  CONFIGURATION
    Environment variables     Environment variables
      Several environment variables control the behaviour of NetBSD builds.       Several environment variables control the behaviour of NetBSD builds.
   
        HOST_SH           Path name to a POSIX-compliant shell.  If this is not
                          set explicitly, then the default is set using heuris-
                          tics dependent on the host platform, or from the shell
                          under which build.sh is executed (if that can be deter-
                          mined), or using the first copy of sh found in PATH.
                          If the host system's /bin/sh is not POSIX-compliant, we
                          suggest that you build using commands like
   
                                HOST_SH=/path/to/working/shell
                                export HOST_SH
                                ${HOST_SH} build.sh [options]
   
        HOST_CC           Path name to C compiler used to create the toolchain.
   
        HOST_CXX          Path name to C++ compiler used to create the toolchain.
   
      MACHINE           Machine type.       MACHINE           Machine type.
   
      MACHINE_ARCH      Machine architecture.       MACHINE_ARCH      Machine architecture.
Line 100  CONFIGURATION
Line 104  CONFIGURATION
      MAKEFLAGS         Flags to invoke make(1) with.       MAKEFLAGS         Flags to invoke make(1) with.
   
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-
                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.                         tory.  The value is subjected to variable expansion by
                          make(1).  Used only if MAKEOBJDIRPREFIX is not defined.
                        MAKEOBJDIR can only be provided in the environment or                         MAKEOBJDIR can only be provided in the environment or
                        via the -O flag of build.sh.                         via the -O flag of build.sh.
   
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If       MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If
                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used                         specified, must be an absolute path.  If this is
                        as the .OBJDIR for the current directory.  The current                         defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the
                        directory may be read only.  MAKEOBJDIRPREFIX can only                         .OBJDIR for the current directory.  The current direc-
                        be provided in the environment or via the -M flag of                         tory may be read only.  MAKEOBJDIRPREFIX can only be
                          provided in the environment or via the -M flag of
                        build.sh.                         build.sh.
   
    "make" variables     "make" variables
Line 124  CONFIGURATION
Line 130  CONFIGURATION
      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-       DESTDIR     Directory to contain the built NetBSD system.  If set, spe-
                  cial options are passed to the compilation tools to prevent                   cial options are passed to the compilation tools to prevent
                  their default use of the host system's /usr/include,                   their default use of the host system's /usr/include,
                  /usr/lib, and so forth.  This pathname should not end with a                   /usr/lib, and so forth.  This pathname must be an absolute
                  slash (/) character (for installation into the system's root                   path, and should not end with a slash (/) character.  (For
                  directory, set DESTDIR to an empty string).  The directory                   installation into the system's root directory, set DESTDIR to
                  must reside on a file system which supports long file names                   an empty string, not to ``/'').  The directory must reside on
                  and hard links.                   a file system which supports long file names and hard links.
   
                  Default: Empty string if USETOOLS is ``yes''; unset other-                   Default: Empty string if USETOOLS is ``yes''; unset other-
                  wise.                   wise.
Line 141  CONFIGURATION
Line 147  CONFIGURATION
   
                  Default: ``/etc/mk.conf''                   Default: ``/etc/mk.conf''
   
        MAKEVERBOSE
                    Level of verbosity of status messages.  Supported values:
   
                    0    No descriptive messages are shown.
   
                    1    Descriptive messages are shown.
   
                    2    Descriptive messages (prefixed with a `#') and command
                         output is not suppressed.
   
                    Default: 2
   
      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-       MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-
                  matted plaintext manual pages will be created during a build.                   matted plaintext manual pages will be created during a build.
   
Line 233  CONFIGURATION
Line 251  CONFIGURATION
   
                  Default: ``yes''                   Default: ``yes''
   
        MKTTINTERP  Can be set to ``yes'' or ``no''.  For X builds, decides if
                    the TrueType bytecode interpreter is turned on.  See
                    http://www.freetype.org/patents.html for details.
   
                    Default: ``no''
   
      MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an       MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an
                  unprivileged install will occur.  The user, group, permis-                   unprivileged install will occur.  The user, group, permis-
                  sions, and file flags, will not be set on the installed item;                   sions, and file flags, will not be set on the installed
                  instead the information will be appended to a file called                   items; instead the information will be appended to a file
                  METALOG in DESTDIR.  The contents of METALOG is used during                   called METALOG in DESTDIR.  The contents of METALOG are used
                  the generation of the distribution tar files to ensure that                   during the generation of the distribution tar files to ensure
                  the appropriate file ownership is stored.                   that the appropriate file ownership is stored.
   
                  Default: ``no''                   Default: ``no''
   
Line 251  CONFIGURATION
Line 275  CONFIGURATION
   
                  Default: ``no''                   Default: ``no''
   
      TOOLDIR     Directory to hold the host tools, once built.  This directory       MKX11       Can be set to ``yes'' or ``no''.  Indicates whether X11R6 is
                  should be unique to a given host system and NetBSD source                   built from X11SRCDIR.
                  tree.  (However, multiple targets may share the same TOOLDIR;  
                  the target-dependent files have unique names.)  If unset, a                   Default: ``no''
                  default based on the uname(1) information of the host plat-  
                  form will be created in the .OBJDIR of src.       TOOLDIR     Directory to hold the host tools, once built.  If specified,
                    must be an absolute path.  This directory should be unique to
                    a given host system and NetBSD source tree.  (However, multi-
                    ple targets may share the same TOOLDIR; the target-dependent
                    files have unique names.)  If unset, a default based on the
                    uname(1) information of the host platform will be created in
                    the .OBJDIR of src.
   
                  Default: Unset.                   Default: Unset.
   
Line 283  CONFIGURATION
Line 313  CONFIGURATION
                  preserve traditional semantics of the <bsd.*.mk> make(1)                   preserve traditional semantics of the <bsd.*.mk> make(1)
                  include files).                   include files).
   
        X11SRCDIR   Directory containing the X11R6 source.  If specified, must be
                    an absolute path.  The main X11R6 source is found in
                    X11SRCDIR/xfree/xc.
   
                    Default: ``/usr/xsrc''
   
    "make" variables for full builds     "make" variables for full builds
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level ``Makefile'' and do not affect
      manually building subtrees of the NetBSD source code.       manually building subtrees of the NetBSD source code.
   
      INSTALLWORLDDIR  Location for the ``make installworld'' target to install       INSTALLWORLDDIR  Location for the ``make installworld'' target to install
                       to.                        to.  If specified, must be an absolute path.
   
                       Default: ``/''                        Default: ``/''
   
Line 337  CONFIGURATION
Line 373  CONFIGURATION
   
      RELEASEDIR       If set, specifies the directory to which a release(7)       RELEASEDIR       If set, specifies the directory to which a release(7)
                       layout will be written at the end of a ``make release''.                        layout will be written at the end of a ``make release''.
                         If specified, must be an absolute path.
   
                       Default: Unset.                        Default: Unset.
   
Line 345  CONFIGURATION
Line 382  CONFIGURATION
   
 BUILDING  BUILDING
    "make" command line options     "make" command line options
      This is only a summary of options available to make(1); only the options       This is not a summary of all the options available to make(1); only the
      used most frequently with NetBSD builds are listed here.       options used most frequently with NetBSD builds are listed here.
   
      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should       -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
                 use .WAIT or have explicit dependancies as necessary to                  use .WAIT or have explicit dependencies as necessary to
                 enforce build ordering.  If you see build failures with -j,                  enforce build ordering.  If you see build failures with -j,
                 please save complete build logs so the failures can be ana-                  please save complete build logs so the failures can be ana-
                 lyzed.                  lyzed.
Line 364  BUILDING
Line 401  BUILDING
                 actually execute them.  This will still cause recursion to                  actually execute them.  This will still cause recursion to
                 take place.                  take place.
   
      -v var     Print make(1)'s idea of the value of var.  Does not build any       -V var     Print make(1)'s idea of the value of var.  Does not build any
                 targets.                  targets.
   
      var=value  Set the variable var to value, overriding any setting speci-       var=value  Set the variable var to value, overriding any setting speci-
Line 383  BUILDING
Line 420  BUILDING
   
      cleandir   Same as clean, but also remove preformatted documentation,       cleandir   Same as clean, but also remove preformatted documentation,
                 dependency files generated by ``make depend'', and any other                  dependency files generated by ``make depend'', and any other
                 files known to be created at build time.  ``make distclean''                  files known to be created at build time.
                 may be used as a synonym, for familiarity with a similar well-  
                 known convention.  
   
      depend     Create dependency files (.depend) containing more detailed       depend     Create dependency files (.depend) containing more detailed
                 information about the dependencies of source code on header                  information about the dependencies of source code on header
Line 396  BUILDING
Line 431  BUILDING
                 This improves cache locality of the build since both passes                  This improves cache locality of the build since both passes
                 read the source files in their entirety.                  read the source files in their entirety.
   
        distclean  Synonym for cleandir.
   
      includes   Build and install system header files.  Typically needed       includes   Build and install system header files.  Typically needed
                 before any system libraries or programs can be built.                  before any system libraries or programs can be built.
   
Line 417  BUILDING
Line 454  BUILDING
      Additional make(1) targets are usable specifically from the top source       Additional make(1) targets are usable specifically from the top source
      level to facilitate building the entire NetBSD source tree.       level to facilitate building the entire NetBSD source tree.
   
      build         Build the entire NetBSD system.  This orders portions of       build         Build the entire NetBSD system (except the kernel).  This
                    the source tree such that prerequisites will be built in                     orders portions of the source tree such that prerequisites
                    the proper order.                     will be built in the proper order.
   
      distribution  Do a ``make build'', and then install a full distribution       distribution  Do a ``make build'', and then install a full distribution
                    into DESTDIR, including files in DESTDIR/dev, DESTDIR/etc,                     (which does not include a kernel) into DESTDIR, including
                    DESTDIR/root and DESTDIR/var.                     files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and
                      DESTDIR/var.
   
      buildworld    As per ``make distribution'', except that it ensures that       buildworld    As per ``make distribution'', except that it ensures that
                    DESTDIR is not the root directory.                     DESTDIR is not the root directory.
   
      installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR       installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR
                    (which defaults to the root directory).  Ensures that                     (which defaults to the root directory).  Ensures that
                    INSTALLWORLDDIR is the not root directory if cross compil-                     INSTALLWORLDDIR is not the root directory if cross compil-
                    ing.                     ing.
   
                    Note: It is highly recommended that you upgrade your kernel                     The INSTALLSETS environment variable may be set to a list
                    and reboot before performing this operation.                     of distribution sets to be installed.  By default, all sets
                      except ``etc'' and ``xetc'' are installed (so most files in
                      INSTALLWORLDDIR/etc will not be installed or modified).
   
                      Note: Before performing this operation with
                      INSTALLWORLDDIR=/, it is highly recommended that you
                      upgrade your kernel and reboot.  After performing this
                      operation, it is recommended that you use etcupdate(8) to
                      update files in INSTALLWORLDDIR/etc and that you use
                      postinstall(8) to check for inconsistencies (and possibly
                      to fix them).
   
      sets          Create distribution sets from DESTDIR into       sets          Create distribution sets from DESTDIR into
                    RELEASEDIR/MACHINE/binary/sets.  Should be run after ``make                     RELEASEDIR/RELEASEMACHINEDIR/binary/sets.  Should be run
                    distribution'' (as ``make build'' does not install all of                     after ``make distribution'' (as ``make build'' does not
                    the required files).                     install all of the required files).
   
      sourcesets    Create source sets of the source tree into       sourcesets    Create source sets of the source tree into
                    RELEASEDIR/source/sets.                     RELEASEDIR/source/sets.
   
        syspkgs       Create syspkgs from DESTDIR into
                      RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs.  Should be run
                      after ``make distribution'' (as ``make build'' does not
                      install all of the required files).
   
      release       Do a ``make distribution'', build kernels, distribution       release       Do a ``make distribution'', build kernels, distribution
                    media, and install sets (this as per ``make sets''), and                     media, and install sets (this as per ``make sets''), and
                    then package the system into a standard release layout as                     then package the system into a standard release layout as
                    described by release(7).  This requires that RELEASEDIR be                     described by release(7).  This requires that RELEASEDIR be
                    set (see above).                     set (see above).
   
        iso-image     Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/iso directory.  The CD-ROM file system will have
                      a layout as described in release(7).
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based installa-
                      tion program, which can be used to install or upgrade a
                      NetBSD system.  Bootable CD-ROMs also contain tools that
                      may be useful in repairing a damaged NetBSD installation.
   
                      Before ``make iso-image'' is attempted, RELEASEDIR must be
                      populated by ``make release'' or equivalent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc-
                      tory by ``make release''.  These smaller images usually
                      contain the same tools as the larger images in
                      RELEASEDIR/iso, but do not contain additional content such
                      as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1) util-
                      ity, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
        iso-image-source
                      Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/iso directory.  The CD-ROM file system will have
                      a layout as described in release(7).  It will have top
                      level directories for the machine type and source.
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based installa-
                      tion program, which can be used to install or upgrade a
                      NetBSD system.  Bootable CD-ROMs also contain tools that
                      may be useful in repairing a damaged NetBSD installation.
   
                      Before ``make iso-image-source'' is attempted, RELEASEDIR
                      must be populated by ``make sourcesets release'' or equiva-
                      lent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc-
                      tory by ``make release''.  These smaller images usually
                      contain the same tools as the larger images in
                      RELEASEDIR/iso, but do not contain additional content such
                      as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1) util-
                      ity, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
      regression-tests       regression-tests
                    Can only be run after building the regression tests in the                     Can only be run after building the regression tests in the
                    directory ``regress''.  Runs the compiled regression tests                     directory ``regress''.  Runs the compiled regression tests
Line 491  BUILDING
Line 597  BUILDING
      tools         Build and install the host tools from src/tools.       tools         Build and install the host tools from src/tools.
   
      install=idir  Install the contents of DESTDIR to idir, using ``make       install=idir  Install the contents of DESTDIR to idir, using ``make
                    installworld''.                     installworld''.  Note that files that are part of the
                      ``etc'' or ``xetc'' sets will not be installed.
   
      kernel=kconf  Build a new kernel.  The kconf argument is the name of a       kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                    configuration file suitable for use by config(8).  If kconf                     configuration file suitable for use by config(1).  If kconf
                    does not contain any `/' characters, the configuration file                     does not contain any `/' characters, the configuration file
                    is expected to be found in the KERNCONFDIR directory, which                     is expected to be found in the KERNCONFDIR directory, which
                    is typically sys/arch/MACHINE/conf.  The new kernel will be                     is typically sys/arch/MACHINE/conf.  The new kernel will be
Line 506  BUILDING
Line 613  BUILDING
   
      releasekernel=kconf       releasekernel=kconf
                    Install a gzip(1)ed copy of the kernel built by                     Install a gzip(1)ed copy of the kernel built by
                    kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually                     kernel=kconf into
                    as netbsd-kconf.gz, although the ``netbsd'' prefix is                     RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as
                    determined from the ``config'' directives in kconf.                     netbsd-kconf.gz, although the ``netbsd'' prefix is deter-
                      mined from the ``config'' directives in kconf.
   
      sets          Perform ``make sets''.       sets          Perform ``make sets''.
   
      sourcesets    Perform ``make sourcesets''.       sourcesets    Perform ``make sourcesets''.
   
      The following command line options alter the behaviour of the above oper-       syspkgs       Perform ``make syspkgs''.
      ations: The following command line options alter the behaviour of the  
      build.sh operations described above:       iso-image     Perform ``make iso-image''.
   
        iso-image-source
                      Perform ``make iso-image-source''.
   
        The following command line options alter the behaviour of the build.sh
        operations described above:
   
      -a arch   Set the value of MACHINE_ARCH to arch.       -a arch   Set the value of MACHINE_ARCH to arch.
   
      -B buildid       -B buildid
                Set the value of BUILDID to buildid.  This will also append the                 Set the value of BUILDID to buildid.  This will also append the
                build idenfitier to the name of the ``make'' wrapper script so                 build identifier to the name of the ``make'' wrapper script so
                that the resulting name is of the form                 that the resulting name is of the form
                ``nbmake-MACHINE-BUILDID''.                 ``nbmake-MACHINE-BUILDID''.
   
      -D dest   Set the value of DESTDIR to dest.       -C cdextras
                  Set the value of CDEXTRA to cdextras which is a space-separated
                  list of files or directories which will be added in order to
                  the CD-ROM image when used in conjunction with ``iso-image'' or
                  ``iso-image-source''.  Files will be added to the root of the
                  CD-ROM image, whereas directories will be copied recursively.
                  If relative paths are specified, they will be converted to
                  absolute paths before being used.
   
        -D dest   Set the value of DESTDIR to dest.  If a relative path is speci-
                  fied, it will be converted to an absolute path before being
                  used.
   
      -E        Set `expert' mode.  This overrides various sanity checks, and       -E        Set `expert' mode.  This overrides various sanity checks, and
                allows: DESTDIR does not have to be set to a non-root path for                 allows: DESTDIR does not have to be set to a non-root path for
Line 536  BUILDING
Line 661  BUILDING
                Note: It is highly recommended that you know what you are doing                 Note: It is highly recommended that you know what you are doing
                when you use this option.                 when you use this option.
   
        -h        Print a help message.
   
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have       -j njob   Passed through to make(1).  Makefiles should use .WAIT or have
                explicit dependancies as necessary to enforce build ordering.                 explicit dependancies as necessary to enforce build ordering.
                If you see build failures with -j, please save complete build                 If you see build failures with -j, please save complete build
                logs so the failures can be analyzed.                 logs so the failures can be analyzed.
   
      -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.       -M obj    Set MAKEOBJDIRPREFIX to obj.  If a relative path is specified,
                  it will be converted to an absolute path before being used.
      -m mach   Set the value of MACHINE to mach.  This will also override any                 Unsets MAKEOBJDIR.
                value of MACHINE_ARCH in the process environment with a value  
                deduced from mach, unless -a is specified, or mach is a special       -m mach   Set the value of MACHINE to mach, except in some special cases
                case listed below.  All cross builds require -m, but if unset                 listed below.  This will also override any value of
                on a NetBSD host, the host's value of MACHINE will be detected                 MACHINE_ARCH in the process environment with a value deduced
                and used automatically.                 from mach, unless -a is specified.  All cross builds require
                  -m, but if unset on a NetBSD host, the host's value of MACHINE
                Some machines support multiple values for MACHINE_ARCH.  For a                 will be detected and used automatically.
                given value of mach, the following MACHINE and MACHINE_ARCH  
                values will result:                 Some machines support multiple values for MACHINE_ARCH.  The
                  following special cases for the mach argument are defined to
                  set the listed values of MACHINE and MACHINE_ARCH:
   
                      mach          MACHINE    MACHINE_ARCH                       mach          MACHINE    MACHINE_ARCH
                        evbarm        evbarm     (not set)
                        evbarm-eb     evbarm     armeb
                        evbarm-el     evbarm     arm
                      evbmips       evbmips    (not set)                       evbmips       evbmips    (not set)
                      evbmips-eb    evbmips    mipseb                       evbmips-eb    evbmips    mipseb
                      evbmips-el    evbmips    mipsel                       evbmips-el    evbmips    mipsel
Line 565  BUILDING
Line 697  BUILDING
                      sbmips-eb     sbmips     mipseb                       sbmips-eb     sbmips     mipseb
                      sbmips-el     sbmips     mipsel                       sbmips-el     sbmips     mipsel
   
        -N noiselevel
                  Set the ``noisyness'' level of the build, by setting
                  MAKEVERBOSE to noiselevel.
   
      -n        Show the commands that would be executed by build.sh, but do       -n        Show the commands that would be executed by build.sh, but do
                not make any changes.  This is similar in concept to ``make                 not make any changes.  This is similar in concept to ``make
                -n''.                 -n''.
   
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will       -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                place the built object files under obj.  For instance, a set-                 place the built object files under obj.  If a relative path is
                ting of /usr/obj will place build-time files under                 specified, it will be converted to an absolute path before
                /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and so forth.                 being used.  For instance, a setting of /usr/obj will place
                Unsets MAKEOBJDIRPREFIX.                 build-time files under /usr/obj/bin, /usr/obj/lib,
                  /usr/obj/usr.bin, and so forth.  Unsets MAKEOBJDIRPREFIX.
   
      -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be       -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be
                automatically set to ``yes'' (which is opposite to the default                 automatically set to ``yes'' (which is opposite to the default
                behaviour).                 behaviour).
   
      -R rel    Set the value of RELEASEDIR to rel.       -R rel    Set the value of RELEASEDIR to rel.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -r        Remove the contents of DESTDIR and TOOLDIR before building       -r        Remove the contents of DESTDIR and TOOLDIR before building
                (provides a clean starting point).  This will skip deleting                 (provides a clean starting point).  This will skip deleting
                DESTDIR if building on a native system to the root directory.                 DESTDIR if building on a native system to the root directory.
   
      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap       -T tools  Set the value of TOOLDIR to tools.  If a relative path is spec-
                ``make'' will only be rebuilt as needed (when the source files                 ified, it will be converted to an absolute path before being
                for make(1) change).                 used.  If set, the bootstrap ``make'' will only be rebuilt as
                  needed (when the source files for make(1) change).
   
      -U        Set MKUNPRIVED=yes.       -U        Set MKUNPRIVED=yes.
   
Line 601  BUILDING
Line 741  BUILDING
                Create the nbmake wrapper script (see below) in a custom loca-                 Create the nbmake wrapper script (see below) in a custom loca-
                tion, specified by wrapper.  This allows, for instance, to                 tion, specified by wrapper.  This allows, for instance, to
                place the wrapper in PATH automatically.  Note that wrapper is                 place the wrapper in PATH automatically.  Note that wrapper is
                the full name of the file, not just a directory name.                 the full name of the file, not just a directory name.  If a
                  relative path is specified, it will be converted to an absolute
                  path before being used.
   
        -X x11src
                  Set the value of X11SRCDIR to x11src.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
        -x        Set MKX11=yes.
   
      -Z var    Unset ("zap") the environment variable var.  This is propagated       -Z var    Unset ("zap") the environment variable var.  This is propagated
                to the nbmake wrapper.                 to the nbmake wrapper.
Line 654  OBSOLETE VARIABLES
Line 803  OBSOLETE VARIABLES
                  TOOLCHAIN_MISSING=yes.                   TOOLCHAIN_MISSING=yes.
   
 SEE ALSO  SEE ALSO
      make(1), hier(7), release(7)       make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),
        pkgsrc/sysutils/cdrtools
   
 HISTORY  HISTORY
      The build.sh based build scheme was introduced for NetBSD 1.6 as       The build.sh based build scheme was introduced for NetBSD 1.6 as
Line 663  HISTORY
Line 813  HISTORY
 BUGS  BUGS
      A few platforms are not yet using this build system.       A few platforms are not yet using this build system.
   
 NetBSD                          August 7, 2003                          NetBSD  NetBSD                          March 18, 2008                          NetBSD

Legend:
Removed from v.1.44  
changed lines
  Added in v.1.62.4.3

CVSweb <webmaster@jp.NetBSD.org>