[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.37 and 1.56

version 1.37, 2003/07/18 02:19:55 version 1.56, 2006/01/28 21:34:08
Line 1 
Line 1 
 BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)  BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)
   
 NAME  NAME
      BUILDING - Procedure for building NetBSD from source code.       BUILDING -- Procedure for building NetBSD from source code.
   
 STATUS  STATUS
      This document is a work-in-progress.  As such, the information described       This document is a work-in-progress.  As such, the information described
Line 9  STATUS
Line 9  STATUS
      Once this document is completely in sync with reality, this paragraph       Once this document is completely in sync with reality, this paragraph
      will be removed.       will be removed.
   
      Discrepancies between this documentation and the current reality of im-       Discrepancies between this documentation and the current reality of
      plementation are noted specially, as with the note below:       implementation are noted specially, as with the note below:
   
      Note: This document applies only to platforms which use the new toolchain       Note: This document applies only to platforms which use the new toolchain
      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.       as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.
Line 28  REQUIREMENTS
Line 28  REQUIREMENTS
      host system to create a build toolchain for the target architecture.  The       host system to create a build toolchain for the target architecture.  The
      host system must have at least C and C++ compilers in order to create the       host system must have at least C and C++ compilers in order to create the
      toolchain (make is not required); all other tools are created as part of       toolchain (make is not required); all other tools are created as part of
      the NetBSD build process.       the NetBSD build process.  (See the environment variables section below
        if you need to override or manually select your compilers.)
            Note: A couple of host toolchain components are not yet available  
            in the tools directory.  Also, some tools use non-POSIX, non-ANSI C  
            extensions and need to be standardized.  As a result, cross-compil-  
            ing from systems other than NetBSD is not currently supported.  
   
 FILES  FILES
    Source tree layout     Source tree layout
Line 42  FILES
Line 38  FILES
   
      BUILDING       This document (in plaintext).       BUILDING       This document (in plaintext).
   
      Makefile       The main Makefile for NetBSD; should only be run for na-       tools/compat/README
                     tive builds with an appropriately up-to-date version of                      Special notes for cross-hosting a NetBSD build on non-
                       NetBSD platforms.
   
        Makefile       The main Makefile for NetBSD; should only be run for
                       native builds with an appropriately up-to-date version of
                     NetBSD make(1).  (For building from out-of-date systems or                      NetBSD make(1).  (For building from out-of-date systems or
                     on a non-native host, see the build.sh shell script.)                      on a non-native host, see the build.sh shell script.)
   
Line 61  FILES
Line 61  FILES
                     Sources imported verbatim from third parties, without man-                      Sources imported verbatim from third parties, without man-
                     gling the existing build structure.  Other source trees in                      gling the existing build structure.  Other source trees in
                     bin through usr.sbin use the NetBSD make(1) ``reachover''                      bin through usr.sbin use the NetBSD make(1) ``reachover''
                     Makefile semantics when building these programs for a na-                      Makefile semantics when building these programs for a
                     tive host.                      native host.
   
      distrib/, etc/       distrib/, etc/
                     Sources for items used when making a full release snap-                      Sources for items used when making a full release snap-
Line 83  FILES
Line 83  FILES
                     any of these directories are missing, they will be skipped                      any of these directories are missing, they will be skipped
                     during the build.                      during the build.
   
        x11/           ``Reachover'' build structure for X11R6; the source is in
                       X11SRCDIR.
   
    Build tree layout     Build tree layout
      The NetBSD build tree is described in hier(7), and the release layout is       The NetBSD build tree is described in hier(7), and the release layout is
      described in release(7).       described in release(7).
Line 91  CONFIGURATION
Line 94  CONFIGURATION
    Environment variables     Environment variables
      Several environment variables control the behaviour of NetBSD builds.       Several environment variables control the behaviour of NetBSD builds.
   
        HOST_CC           Path name to C compiler used to create the toolchain.
   
        HOST_CXX          Path name to C++ compiler used to create the toolchain.
   
      MACHINE           Machine type.       MACHINE           Machine type.
   
      MACHINE_ARCH      Machine architecture.       MACHINE_ARCH      Machine architecture.
Line 102  CONFIGURATION
Line 109  CONFIGURATION
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-
                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.                         tory.  Used only if MAKEOBJDIRPREFIX is not defined.
                        MAKEOBJDIR can only be provided in the environment or                         MAKEOBJDIR can only be provided in the environment or
                        via the -M flag of build.sh.                         via the -O flag of build.sh.
   
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If       MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If
                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used                         this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used
Line 141  CONFIGURATION
Line 148  CONFIGURATION
   
                  Default: ``/etc/mk.conf''                   Default: ``/etc/mk.conf''
   
        MAKEVERBOSE
                    Level of verbosity of status messages.  Supported values:
   
                    0    No descriptive messages are shown.
   
                    1    Descriptive messages are shown.
   
                    2    Descriptive messages (prefixed with a `#') and command
                         output is not suppressed.
   
                    Default: 2
   
      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-       MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-
                  matted plaintext manual pages will be created during a build.                   matted plaintext manual pages will be created during a build.
   
Line 149  CONFIGURATION
Line 168  CONFIGURATION
      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-       MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-
                  graphic code will be included in a build; provided for the                   graphic code will be included in a build; provided for the
                  benefit of countries that do not allow strong cryptography.                   benefit of countries that do not allow strong cryptography.
                  Will not affect use of the standard low-security password en-                   Will not affect use of the standard low-security password
                  cryption system, crypt(3).                   encryption system, crypt(3).
   
                  Default: ``yes''                   Default: ``yes''
   
      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system       MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system
                  documentation destined for DESTDIR/usr/share/doc will be in-                   documentation destined for DESTDIR/usr/share/doc will be
                  stalled during a build.                   installed during a build.
   
                  Default: ``yes''                   Default: ``yes''
   
Line 190  CONFIGURATION
Line 209  CONFIGURATION
                  Default: ``yes''                   Default: ``yes''
   
      MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native       MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native
                  Language System locale zone files will be compiled and in-                   Language System locale zone files will be compiled and
                  stalled during a build.                   installed during a build.
   
                  Default: ``yes''                   Default: ``yes''
   
Line 212  CONFIGURATION
Line 231  CONFIGURATION
   
      MKPICINSTALL       MKPICINSTALL
                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)                   Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)
                  format libraries (lib*_pic.a), used to generate shared li-                   format libraries (lib*_pic.a), used to generate shared
                  braries, are installed during a build.                   libraries, are installed during a build.
   
                  Default: ``yes''                   Default: ``yes''
   
Line 226  CONFIGURATION
Line 245  CONFIGURATION
                  code.                   code.
   
      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files       MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files
                  destined to reside in DESTDIR/usr/share will be built and in-                   destined to reside in DESTDIR/usr/share will be built and
                  stalled during a build.  If set to ``no'', then all of                   installed during a build.  If set to ``no'', then all of
                  MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to                   MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to
                  ``no'' unconditionally.                   ``no'' unconditionally.
   
                  Default: ``yes''                   Default: ``yes''
   
        MKTTINTERP  Can be set to ``yes'' or ``no''.  For X builds, decides if
                    the TrueType bytecode interpreter is turned on.  See
                    http://www.freetype.org/patents.html for details.
   
                    Default: ``no''
   
        MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an
                    unprivileged install will occur.  The user, group, permis-
                    sions, and file flags, will not be set on the installed
                    items; instead the information will be appended to a file
                    called METALOG in DESTDIR.  The contents of METALOG are used
                    during the generation of the distribution tar files to ensure
                    that the appropriate file ownership is stored.
   
                    Default: ``no''
   
        MKUPDATE    Can be set to ``yes'' or ``no''.  Indicates whether all
                    install operations intended to write to DESTDIR will compare
                    file timestamps before installing, and skip the install phase
                    if the destination files are up-to-date.  This also has
                    implications on full builds (see next subsection).
   
                    Default: ``no''
   
        MKX11       Can be set to ``yes'' or ``no''.  Indicates whether X11R6 is
                    built from X11SRCDIR.
   
                    Default: ``no''
   
      TOOLDIR     Directory to hold the host tools, once built.  This directory       TOOLDIR     Directory to hold the host tools, once built.  This directory
                  should be unique to a given host system and NetBSD source                   should be unique to a given host system and NetBSD source
                  tree.  (However, multiple targets may share the same TOOLDIR;                   tree.  (However, multiple targets may share the same TOOLDIR;
                  the target-dependent files have unique names.)  If unset, a                   the target-dependent files have unique names.)  If unset, a
                  default based on the uname(1) information of the host plat-                   default based on the uname(1) information of the host plat-
                  form will be created in the .OBJDIR of src/tools.                   form will be created in the .OBJDIR of src.
   
                  Default: Unset.  
   
      UNPRIVED    If set, then an unprivileged install will occur.  The user,  
                  group, permissions, and file flags, will not be set on the  
                  installed item; instead the information will be appended to a  
                  file called METALOG in DESTDIR.  The contents of METALOG is  
                  used during the generation of the distribution tar files to  
                  ensure that the appropriate file ownership is stored.  
   
                  Default: Unset.  
   
      UPDATE      If set, then all install operations intended to write to  
                  DESTDIR will compare file timestamps before installing, and  
                  skip the install phase if the destination files are up-to-  
                  date.  This also has implications on full builds (see next  
                  subsection).  
   
                  Default: Unset.                   Default: Unset.
   
Line 279  CONFIGURATION
Line 310  CONFIGURATION
   
                  Default: ``yes'' if building all or part of a whole NetBSD                   Default: ``yes'' if building all or part of a whole NetBSD
                  source tree (detected automatically); ``no'' otherwise (to                   source tree (detected automatically); ``no'' otherwise (to
                  preserve traditional semantics of the <bsd.*.mk> make(1) in-                   preserve traditional semantics of the <bsd.*.mk> make(1)
                  clude files).                   include files).
   
        X11SRCDIR   Directory containing the X11R6 source.  The main X11R6 source
                    is found in X11SRCDIR/xfree/xc.
   
                    Default: ``/usr/xsrc''
   
    "make" variables for full builds     "make" variables for full builds
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level ``Makefile'' and do not affect
Line 291  CONFIGURATION
Line 327  CONFIGURATION
   
                       Default: ``/''                        Default: ``/''
   
      MKOBJDIRS        Can be set to ``yes'' or ``no''.  Indicates whether ob-       MKOBJDIRS        Can be set to ``yes'' or ``no''.  Indicates whether
                       ject directories will be created automatically (via a                        object directories will be created automatically (via a
                       ``make obj'' pass) at the start of a build.                        ``make obj'' pass) at the start of a build.
   
                       Default: ``no''                        Default: ``no''
   
        MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in addi-
                         tion to the effects described for MKUPDATE=yes above,
                         this implies the effects of NOCLEANDIR (i.e., ``make
                         cleandir'' is avoided).
   
                         Default: ``no''
   
      NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see       NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see
                       below)                        below)
   
Line 319  CONFIGURATION
Line 362  CONFIGURATION
   
      NOINCLUDES       If set, avoids the ``make includes'' phase of a full       NOINCLUDES       If set, avoids the ``make includes'' phase of a full
                       build.  This has the effect of preventing make(1) from                        build.  This has the effect of preventing make(1) from
                       thinking that some programs are out-of-date simply be-                        thinking that some programs are out-of-date simply
                       cause the system include files have changed.  However,                        because the system include files have changed.  However,
                       this option should not be used when updating the entire                        this option should not be used when updating the entire
                       NetBSD source tree arbitrarily; it is suggested to use                        NetBSD source tree arbitrarily; it is suggested to use
                       UPDATE in that case.                        MKUPDATE=yes in that case.
   
                       Default: Unset.                        Default: Unset.
   
Line 335  CONFIGURATION
Line 378  CONFIGURATION
                       Note: build.sh will provide a default of releasedir (in                        Note: build.sh will provide a default of releasedir (in
                       the top-level .OBJDIR) unless run in `expert' mode                        the top-level .OBJDIR) unless run in `expert' mode
   
      UPDATE           If set, then in addition to the effects described for  
                       UPDATE above, this implies the effects of NOCLEANDIR  
                       (i.e., ``make cleandir'' is avoided).  
   
 BUILDING  BUILDING
    "make" command line options     "make" command line options
      This is only a summary of options available to make(1); only the options       This is not a summary of all the options available to make(1); only the
      used most frequently with NetBSD builds are listed here.       options used most frequently with NetBSD builds are listed here.
   
      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should       -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
                 use .WAIT or have explicit dependancies as necessary to en-                  use .WAIT or have explicit dependencies as necessary to
                 force build ordering.  If you see build failures with -j,                  enforce build ordering.  If you see build failures with -j,
                 please save complete build logs so the failures can be ana-                  please save complete build logs so the failures can be ana-
                 lyzed.                  lyzed.
   
Line 360  BUILDING
Line 399  BUILDING
                 actually execute them.  This will still cause recursion to                  actually execute them.  This will still cause recursion to
                 take place.                  take place.
   
      -v var     Print make(1)'s idea of the value of var.  Does not build any       -V var     Print make(1)'s idea of the value of var.  Does not build any
                 targets.                  targets.
   
      var=value  Set the variable var to value, overriding any setting speci-       var=value  Set the variable var to value, overriding any setting speci-
Line 377  BUILDING
Line 416  BUILDING
   
      clean      Remove program and library object code files.       clean      Remove program and library object code files.
   
      cleandir   Same as clean, but also remove preformatted documentation, de-       cleandir   Same as clean, but also remove preformatted documentation,
                 pendency files generated by ``make depend'', and any other                  dependency files generated by ``make depend'', and any other
                 files known to be created at build time.  ``make distclean''                  files known to be created at build time.
                 may be used as a synonym, for familiarity with a similar well-  
                 known convention.  
   
      depend     Create dependency files (.depend) containing more detailed in-       depend     Create dependency files (.depend) containing more detailed
                 formation about the dependencies of source code on header                  information about the dependencies of source code on header
                 files.  Allows programs to be recompiled automatically when a                  files.  Allows programs to be recompiled automatically when a
                 dependency changes.                  dependency changes.
   
Line 392  BUILDING
Line 429  BUILDING
                 This improves cache locality of the build since both passes                  This improves cache locality of the build since both passes
                 read the source files in their entirety.                  read the source files in their entirety.
   
      includes   Build and install system header files.  Typically needed be-       distclean  Synonym for cleandir.
                 fore any system libraries or programs can be built.  
        includes   Build and install system header files.  Typically needed
                   before any system libraries or programs can be built.
   
      install    Install programs, libraries, and documentation into DESTDIR.       install    Install programs, libraries, and documentation into DESTDIR.
                 Few files will be installed to DESTDIR/dev, DESTDIR/etc,                  Few files will be installed to DESTDIR/dev, DESTDIR/etc,
Line 426  BUILDING
Line 465  BUILDING
   
      installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR       installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR
                    (which defaults to the root directory).  Ensures that                     (which defaults to the root directory).  Ensures that
                    INSTALLWORLDDIR is the not root directory if cross compil-                     INSTALLWORLDDIR is not the root directory if cross compil-
                    ing.                     ing.
   
                    Note: It is highly recommended that you upgrade your kernel                     Note: It is highly recommended that you upgrade your kernel
Line 440  BUILDING
Line 479  BUILDING
      sourcesets    Create source sets of the source tree into       sourcesets    Create source sets of the source tree into
                    RELEASEDIR/source/sets.                     RELEASEDIR/source/sets.
   
      release       Do a ``make distribution'', build kernels, distribution me-       syspkgs       Create syspkgs from DESTDIR into
                    dia, and install sets (this as per ``make sets''), and then                     RELEASEDIR/MACHINE/binary/syspkgs.  Should be run after
                    package the system into a standard release layout as de-                     ``make distribution'' (as ``make build'' does not install
                    scribed by release(7).  This requires that RELEASEDIR be                     all of the required files).
   
        release       Do a ``make distribution'', build kernels, distribution
                      media, and install sets (this as per ``make sets''), and
                      then package the system into a standard release layout as
                      described by release(7).  This requires that RELEASEDIR be
                    set (see above).                     set (see above).
   
        iso-image     Create a CD-ROM image in
                      RELEASEDIR/MACHINE/installation/cdrom.  RELEASEDIR must
                      already have been populated by ``make release'' or equiva-
                      lent.  This requires the mkisofs(1) utility, which is not
                      part of NetBSD, but which can be installed from
                      pkgsrc/sysutils/cdrecord.
   
      regression-tests       regression-tests
                    Can only be run after building the regression tests in the                     Can only be run after building the regression tests in the
                    directory ``regress''.  Runs the compiled regression tests                     directory ``regress''.  Runs the compiled regression tests
Line 470  BUILDING
Line 521  BUILDING
   
      The following operations are supported by build.sh:       The following operations are supported by build.sh:
   
      build         Build the system as per ``make build''.  This option im-       build         Build the system as per ``make build''.  This option
                    plies the obj and tools operations.                     implies the obj and tools operations.
   
      distribution  Build a full distribution as per ``make distribution''.       distribution  Build a full distribution as per ``make distribution''.
                    This option implies the build operation.                     This option implies the build operation.
Line 490  BUILDING
Line 541  BUILDING
                    installworld''.                     installworld''.
   
      kernel=kconf  Build a new kernel.  The kconf argument is the name of a       kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                    configuration file suitable for use by config(8).  If kconf                     configuration file suitable for use by config(1).  If kconf
                    does not contain any `/' characters, the configuration file                     does not contain any `/' characters, the configuration file
                    is expected to be found in the KERNCONFDIR directory, which                     is expected to be found in the KERNCONFDIR directory, which
                    is typically sys/arch/MACHINE/conf.  The new kernel will be                     is typically sys/arch/MACHINE/conf.  The new kernel will be
Line 503  BUILDING
Line 554  BUILDING
      releasekernel=kconf       releasekernel=kconf
                    Install a gzip(1)ed copy of the kernel built by                     Install a gzip(1)ed copy of the kernel built by
                    kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually                     kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually
                    as netbsd-kconf.gz, although the ``netbsd'' prefix is de-                     as netbsd-kconf.gz, although the ``netbsd'' prefix is
                    termined from the ``config'' directives in kconf.                     determined from the ``config'' directives in kconf.
   
      sets          Perform ``make sets''.       sets          Perform ``make sets''.
   
      sourcesets    Perform ``make sourcesets''.       sourcesets    Perform ``make sourcesets''.
   
      The following command line options alter the behaviour of the above oper-       syspkgs       Perform ``make syspkgs''.
      ations: The following command line options alter the behaviour of the  
      build.sh operations described above:       iso-image     Perform ``make iso-image''.
   
        The following command line options alter the behaviour of the build.sh
        operations described above:
   
      -a arch   Set the value of MACHINE_ARCH to arch.       -a arch   Set the value of MACHINE_ARCH to arch.
   
Line 526  BUILDING
Line 580  BUILDING
   
      -E        Set `expert' mode.  This overrides various sanity checks, and       -E        Set `expert' mode.  This overrides various sanity checks, and
                allows: DESTDIR does not have to be set to a non-root path for                 allows: DESTDIR does not have to be set to a non-root path for
                builds, and UNPRIVED does not have to be set when building as a                 builds, and MKUNPRIVED=yes does not have to be set when build-
                non-root user.                 ing as a non-root user.
   
                Note: It is highly recommended that you know what you are doing                 Note: It is highly recommended that you know what you are doing
                when you use this option.                 when you use this option.
   
        -h        Print a help message.
   
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have       -j njob   Passed through to make(1).  Makefiles should use .WAIT or have
                explicit dependancies as necessary to enforce build ordering.                 explicit dependancies as necessary to enforce build ordering.
                If you see build failures with -j, please save complete build                 If you see build failures with -j, please save complete build
                logs so the failures can be analyzed.                 logs so the failures can be analyzed.
   
      -M obj    Set MAKEOBJDIRPREFIX to obj.       -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.
   
      -m mach   Set the value of MACHINE to mach.  This will also override any       -m mach   Set the value of MACHINE to mach.  This will also override any
                value of MACHINE_ARCH in the process environment with a value                 value of MACHINE_ARCH in the process environment with a value
Line 561  BUILDING
Line 617  BUILDING
                      sbmips-eb     sbmips     mipseb                       sbmips-eb     sbmips     mipseb
                      sbmips-el     sbmips     mipsel                       sbmips-el     sbmips     mipsel
   
        -N noiselevel
                  Set the ``noisyness'' level of the build, by setting
                  MAKEVERBOSE to noiselevel.
   
      -n        Show the commands that would be executed by build.sh, but do       -n        Show the commands that would be executed by build.sh, but do
                not make any changes.  This is similar in concept to ``make                 not make any changes.  This is similar in concept to ``make
                -n''.                 -n''.
Line 568  BUILDING
Line 628  BUILDING
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will       -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                place the built object files under obj.  For instance, a set-                 place the built object files under obj.  For instance, a set-
                ting of /usr/obj will place build-time files under                 ting of /usr/obj will place build-time files under
                /usr/obj/bin, /usr/obj/lib, and so forth.                 /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and so forth.
                  Unsets MAKEOBJDIRPREFIX.
   
      -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be       -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be
                automatically set to ``yes'' (which is opposite to the default                 automatically set to ``yes'' (which is opposite to the default
Line 584  BUILDING
Line 645  BUILDING
                ``make'' will only be rebuilt as needed (when the source files                 ``make'' will only be rebuilt as needed (when the source files
                for make(1) change).                 for make(1) change).
   
      -U        Set the UNPRIVED variable.       -U        Set MKUNPRIVED=yes.
   
      -u        Set the UPDATE variable.       -u        Set MKUPDATE=yes.
   
      -V var=[value]       -V var=[value]
                Set the variable var to value (which is optional).                 Set the environment variable var to an optional value.  This is
                  propagated to the nbmake wrapper.
   
      -w wrapper       -w wrapper
                Create the nbmake wrapper script (see below) in a custom loca-                 Create the nbmake wrapper script (see below) in a custom loca-
Line 597  BUILDING
Line 659  BUILDING
                place the wrapper in PATH automatically.  Note that wrapper is                 place the wrapper in PATH automatically.  Note that wrapper is
                the full name of the file, not just a directory name.                 the full name of the file, not just a directory name.
   
        -X x11src
                  Set the value of X11SRCDIR to x11src.
   
        -x        Set MKX11=yes.
   
        -Z var    Unset ("zap") the environment variable var.  This is propagated
                  to the nbmake wrapper.
   
    The "nbmake-MACHINE" wrapper script     The "nbmake-MACHINE" wrapper script
      If using the build.sh script to build NetBSD, a nbmake-MACHINE script       If using the build.sh script to build NetBSD, a nbmake-MACHINE script
      will be created in TOOLDIR/bin upon the first build to assist in building       will be created in TOOLDIR/bin upon the first build to assist in building
Line 605  BUILDING
Line 675  BUILDING
      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call       nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-       the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-
      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.       eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.
        build.sh will also set variables specified with -V, and unset variables
        specified with -Z.
   
      This script can be symlinked into a directory listed in PATH, or called       This script can be symlinked into a directory listed in PATH, or called
      with an absolute path.       with an absolute path.
   
 EXAMPLES  EXAMPLES
      1.   ./build.sh tools kernel=GENERIC       1.   % ./build.sh tools kernel=GENERIC
   
           Build a new toolchain, and use the new toolchain to configure and            Build a new toolchain, and use the new toolchain to configure and
           build a new GENERIC kernel.            build a new GENERIC kernel.
   
      2.   ./build.sh -U distribution       2.   % ./build.sh -U distribution
   
           Using unprivileged mode, build a complete distribution to a DESTDIR            Using unprivileged mode, build a complete distribution to a DESTDIR
           directory that build.sh selects (and will display).            directory that build.sh selects (and will display).
Line 626  EXAMPLES
Line 699  EXAMPLES
           sions stored in DESTDIR/METALOG are correctly applied to the files            sions stored in DESTDIR/METALOG are correctly applied to the files
           as they're copied to /.            as they're copied to /.
   
      4.   ./build.sh -U -u release       4.   % ./build.sh -U -u release
   
           Using unprivileged mode, build a complete release to DESTDIR and            Using unprivileged mode, build a complete release to DESTDIR and
           RELEASEDIR directories that build.sh selects (and will display).            RELEASEDIR directories that build.sh selects (and will display).
           UPDATE (-u) is set to prevent the ``make cleandir'', so that if this            MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that
           is run after example 2, it doesn't need to redo that portion of the            if this is run after example 2, it doesn't need to redo that portion
           release build.            of the release build.
   
 OBSOLETE VARIABLES  OBSOLETE VARIABLES
      NBUILDJOBS  Use the make(1) option -j, instead.       NBUILDJOBS  Use the make(1) option -j, instead.
Line 642  OBSOLETE VARIABLES
Line 715  OBSOLETE VARIABLES
                  TOOLCHAIN_MISSING=yes.                   TOOLCHAIN_MISSING=yes.
   
 SEE ALSO  SEE ALSO
      make(1), hier(7), release(7)       make(1), hier(7), release(7), pkgsrc/sysutils/cdrecord
   
 HISTORY  HISTORY
      The build.sh based build scheme was introduced for NetBSD 1.6 as       The build.sh based build scheme was introduced for NetBSD 1.6 as
Line 651  HISTORY
Line 724  HISTORY
 BUGS  BUGS
      A few platforms are not yet using this build system.       A few platforms are not yet using this build system.
   
 NetBSD                           July 3, 2003                           NetBSD  NetBSD                          January 4, 2006                         NetBSD

Legend:
Removed from v.1.37  
changed lines
  Added in v.1.56

CVSweb <webmaster@jp.NetBSD.org>