[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.49 and 1.117

version 1.49, 2004/02/06 23:22:44 version 1.117, 2014/11/16 06:10:55
Line 1 
Line 1 
 BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)  BUILDING(8)                 System Manager's Manual                BUILDING(8)
   
 NAME  NAME
      BUILDING - Procedure for building NetBSD from source code.       BUILDING -- Procedure for building NetBSD from source code.
   
 STATUS  
      This document is a work-in-progress.  As such, the information described  
      here may not match the reality of the build system as of this writing.  
      Once this document is completely in sync with reality, this paragraph  
      will be removed.  
   
      Discrepancies between this documentation and the current reality of  
      implementation are noted specially, as with the note below:  
   
      Note: This document applies only to platforms which use the new toolchain  
      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.  
      Platforms which have not yet been switched to the new toolchain should  
      continue building traditionally, using the notes specified in the file  
      UPDATING.  
   
 REQUIREMENTS  REQUIREMENTS
      NetBSD is designed to be buildable on most POSIX-compliant host systems.       NetBSD is designed to be buildable on most POSIX-compliant host systems.
Line 28  REQUIREMENTS
Line 13  REQUIREMENTS
      host system to create a build toolchain for the target architecture.  The       host system to create a build toolchain for the target architecture.  The
      host system must have at least C and C++ compilers in order to create the       host system must have at least C and C++ compilers in order to create the
      toolchain (make is not required); all other tools are created as part of       toolchain (make is not required); all other tools are created as part of
      the NetBSD build process.       the NetBSD build process.  (See the environment variables section below
        if you need to override or manually select your compilers.)
   
 FILES  FILES
    Source tree layout     Source tree layout
Line 57  FILES
Line 43  FILES
                     recompiled regularly.                      recompiled regularly.
   
      crypto/dist/, dist/, gnu/dist/       crypto/dist/, dist/, gnu/dist/
                     Sources imported verbatim from third parties, without man-                      Sources imported verbatim from third parties, without
                     gling the existing build structure.  Other source trees in                      mangling the existing build structure.  Other source trees
                     bin through usr.sbin use the NetBSD make(1) ``reachover''                      in bin through usr.sbin use the NetBSD make(1)
                     Makefile semantics when building these programs for a                      ``reachover'' Makefile semantics when building these
                     native host.                      programs for a native host.
   
        external, sys/external
                       Sources and build infrastructure for components imported
                       (mostly) unchanged from upstream maintainers, sorted by
                       applicable license.  This is (slowly) replacing the
                       crypto/dist, dist, and gnu/dist directories.
   
      distrib/, etc/       distrib/, etc/
                     Sources for items used when making a full release snap-                      Sources for items used when making a full release
                     shot, such as files installed in DESTDIR/etc on the desti-                      snapshot, such as files installed in DESTDIR/etc on the
                     nation system, boot media, and release notes.                      destination system, boot media, and release notes.
   
      regress/       Regression test harness.  Can be cross-compiled, but only       tests/, regress/
                     run natively.                      Regression test harness.  Can be cross-compiled, but only
                       run natively.  tests/ uses the atf(7) test framework;
                       regress/ contains older tests that have not yet been
                       migrated to atf(7).
   
      sys/           NetBSD kernel sources.       sys/           NetBSD kernel sources.
   
      tools/         ``Reachover'' build structure for the host build tools.       tools/         ``Reachover'' build structure for the host build tools.
                     This has a special method of determining out-of-date sta-                      This has a special method of determining out-of-date
                     tus.                      status.
   
      bin/ ... usr.sbin/       bin/ ... usr.sbin/
                     Sources to the NetBSD userland (non-kernel) programs.  If                      Sources to the NetBSD userland (non-kernel) programs.  If
Line 85  FILES
Line 80  FILES
      x11/           ``Reachover'' build structure for X11R6; the source is in       x11/           ``Reachover'' build structure for X11R6; the source is in
                     X11SRCDIR.                      X11SRCDIR.
   
        extsrc/        ``Reachover'' build structure for externally added
                       programs and libraries; the source is in EXTSRCSRCDIR.
   
    Build tree layout     Build tree layout
      The NetBSD build tree is described in hier(7), and the release layout is       The NetBSD build tree is described in hier(7), and the release layout is
      described in release(7).       described in release(7).
Line 93  CONFIGURATION
Line 91  CONFIGURATION
    Environment variables     Environment variables
      Several environment variables control the behaviour of NetBSD builds.       Several environment variables control the behaviour of NetBSD builds.
   
      MACHINE           Machine type.       HOST_SH           Path name to a shell available on the host system and
                          suitable for use during the build.  The NetBSD build
                          system requires a modern Bourne-like shell with POSIX-
                          compliant features, and also requires support for the
                          ``local'' keyword to declare local variables in shell
                          functions (which is a widely-implemented but non-
                          standardised feature).
   
                          Depending on the host system, a suitable shell may be
                          /bin/sh, /usr/xpg4/bin/sh, /bin/ksh (provided it is a
                          variant of ksh that supports the ``local'' keyword,
                          such as ksh88, but not ksh93), or /usr/local/bin/bash.
   
                          Most parts of the build require HOST_SH to be an
                          absolute path; however, build.sh allows it to be a
                          simple command name, which will be converted to an
                          absolute path by searching the PATH.
   
      MACHINE_ARCH      Machine architecture.       HOST_CC           Path name to C compiler used to create the toolchain.
   
      MAKE              Path name to invoke make(1) as.       HOST_CXX          Path name to C++ compiler used to create the toolchain.
   
      MAKEFLAGS         Flags to invoke make(1) with.       MACHINE           Machine type, e.g., ``macppc''.
   
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MACHINE_ARCH      Machine architecture, e.g., ``powerpc''.
                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.  
                        MAKEOBJDIR can only be provided in the environment or       MAKE              Path name to invoke make(1) as.
                        via the -O flag of build.sh.  
        MAKEFLAGS         Flags to invoke make(1) with.  Note that build.sh
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If                         ignores the value of MAKEFLAGS passed in the
                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used                         environment, but allows MAKEFLAGS to be set via the -V
                        as the .OBJDIR for the current directory.  The current                         option.
                        directory may be read only.  MAKEOBJDIRPREFIX can only  
                        be provided in the environment or via the -M flag of       MAKEOBJDIR        Directory to use as the .OBJDIR for the current
                        build.sh.                         directory.  The value is subjected to variable
                          expansion by make(1).  Typical usage is to set this
                          variable to a value involving the use of
                          `${.CURDIR:S...}' or `${.CURDIR:C...}', to derive the
                          value of .OBJDIR from the value of .CURDIR.  Used only
                          if MAKEOBJDIRPREFIX is not defined.  MAKEOBJDIR can be
                          provided only in the environment or via the -O flag of
                          build.sh; it cannot usefully be set inside a Makefile,
                          including mk.conf or ${MAKECONF}.
   
        MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  The
                          value is subjected to variable expansion by make(1).
                          build.sh will create the ${MAKEOBJDIRPREFIX} directory
                          if necessary, but if make(1) is used without build.sh,
                          then rules in <bsd.obj.mk> will abort the build if the
                          ${MAKEOBJDIRPREFIX} directory does not exist.  If the
                          value is defined and valid, then
                          ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the .OBJDIR
                          for the current directory.  The current directory may
                          be read only.  MAKEOBJDIRPREFIX can be provided only in
                          the environment or via the -M flag of build.sh; it
                          cannot usefully be set inside a Makefile, including
                          mk.conf or ${MAKECONF}.
   
    "make" variables     "make" variables
      Several variables control the behavior of NetBSD builds.  Unless other-       Several variables control the behavior of NetBSD builds.  Unless
      wise specified, these variables may be set in either the process environ-       otherwise specified, these variables may be set in either the process
      ment or the make(1) configuration file specified by MAKECONF.       environment or the make(1) configuration file specified by MAKECONF.
   
      BUILDID     Identifier for the build.  The identifier will be appended to       BUILDID     Identifier for the build.  If set, this should be a short
                  object directory names, and can be consulted in the make(1)                   string that is suitable for use as part of a file or
                  configuration file in order to set additional build parame-                   directory name.  The identifier will be appended to object
                  ters, such as compiler flags.                   directory names, and can be consulted in the make(1)
                    configuration file in order to set additional build
      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-                   parameters, such as compiler flags.  It will also be used as
                  cial options are passed to the compilation tools to prevent                   part of the kernel version string, which can be printed by
                  their default use of the host system's /usr/include,                   ``uname -v''.
                  /usr/lib, and so forth.  This pathname should not end with a  
                  slash (/) character (for installation into the system's root                   Default: Unset.
                  directory, set DESTDIR to an empty string).  The directory  
                  must reside on a file system which supports long file names  
                  and hard links.  
   
                  Default: Empty string if USETOOLS is ``yes''; unset other-       BUILDINFO   This may be a multi-line string containing information about
                  wise.                   the build.  This will appear in DESTDIR/etc/release, and it
                    will be stored in the buildinfo variable in any kernels that
                    are built.  When such kernels are booted, the sysctl(7)
                    kern.buildinfo variable will report this value.  The string
                    may contain backslash escape sequences, such as ``\\''
                    (representing a backslash character) and ``\n'' (representing
                    a newline).
   
                    Default: Unset.
   
        BUILDSEED   GCC uses random numbers when compiling C++ code.  This
                    variable seeds the gcc random number generator using the
                    -frandom-seed flag with this value.  By default, it is set to
                    NetBSD-(majorversion).  Using a fixed value causes C++
                    binaries to be the same when built from the same sources,
                    resulting in identical (reproducible) builds.  Additional
                    information is available in the GCC documentation of
                    -frandom-seed.
   
        DESTDIR     Directory to contain the built NetBSD system.  If set,
                    special options are passed to the compilation tools to
                    prevent their default use of the host system's /usr/include,
                    /usr/lib, and so forth.  This pathname must be an absolute
                    path, and should not end with a slash (/) character.  (For
                    installation into the system's root directory, set DESTDIR to
                    an empty string, not to ``/'').  The directory must reside on
                    a file system which supports long file names and hard links.
   
                    Default: Empty string if USETOOLS is ``yes''; unset
                    otherwise.
   
                  Note: build.sh will provide a default of destdir.MACHINE (in                   Note: build.sh will provide a default of destdir.MACHINE (in
                  the top-level .OBJDIR) unless run in `expert' mode                   the top-level .OBJDIR) unless run in `expert' mode.
   
        EXTSRCSRCDIR
                    Directory containing sources of externally added programs and
                    libraries.  If specified, must be an absolute path.
   
                    Default: NETBSDRCDIR/../extsrc, if that exists; otherwise
                    /usr/extsrc.
   
      MAKECONF    The name of the make(1) configuration file.  Only settable in       MAKECONF    The name of the make(1) configuration file.  Only settable in
                  the process environment.                   the process environment.
Line 146  CONFIGURATION
Line 215  CONFIGURATION
      MAKEVERBOSE       MAKEVERBOSE
                  Level of verbosity of status messages.  Supported values:                   Level of verbosity of status messages.  Supported values:
   
                  0    No descriptive messages are shown.                   0    No descriptive messages or commands executed by make(1)
                         are shown.
   
                  1    Descriptive messages are shown.                   1    Brief messages are shown describing what is being done,
                         but the actual commands executed by make(1) are not
                         displayed.
   
                    2    Descriptive messages are shown as above (prefixed with a
                         `#'), and ordinary commands performed by make(1) are
                         displayed.
   
                    3    In addition to the above, all commands performed by
                         make(1) are displayed, even if they would ordinarily
                         have been hidden through use of the ``@'' prefix in the
                         relevant makefile.
   
                  2    Descriptive messages (prefixed with a `#') and command                   4    In addition to the above, commands executed by make(1)
                       output is not suppressed.                        are traced through use of the sh(1) ``-x'' flag.
   
                  Default: 2                   Default: 2
   
      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-       MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether
                  matted plaintext manual pages will be created during a build.                   preformatted plaintext manual pages will be created during a
                    build.
   
                  Default: ``yes''                   Default: ``no''
   
      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-       MKCROSSGDB  Can be set to ``yes'' or ``no''.  Create a cross-gdb as a
                  graphic code will be included in a build; provided for the                   host tool.
                  benefit of countries that do not allow strong cryptography.  
                  Will not affect use of the standard low-security password                   Default: ``no''
                  encryption system, crypt(3).  
        MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether
                    cryptographic code will be included in a build; provided for
                    the benefit of countries that do not allow strong
                    cryptography.  Will not affect use of the standard low-
                    security password encryption system, crypt(3).
   
                  Default: ``yes''                   Default: ``yes''
   
        MKDEBUG     Can be set to ``yes'' or ``no''.  Indicates whether debug
                    information should be generated for all userland binaries
                    compiled.  The result is collected as an additional debug.tgz
                    and xdebug.tgz set and installed in /usr/libdata/debug.
   
                    Default: ``no''
   
        MKDEBUGLIB  Can be set to ``yes'' or ``no''.  Indicates whether debug
                    information (see MKDEBUG) should also be generated for all
                    libraries build.
   
                    Default: ``no''
   
      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system       MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system
                  documentation destined for DESTDIR/usr/share/doc will be                   documentation destined for DESTDIR/usr/share/doc will be
                  installed during a build.                   installed during a build.
   
                  Default: ``yes''                   Default: ``yes''
   
        MKEXTSRC    Can be set to ``yes'' or ``no''.  Indicates whether extsrc is
                    built from EXTSRCSRCDIR.
   
                    Default: ``no''
   
        MKHTML      Can be set to ``yes'' or ``no''.  Indicates whether
                    preformatted HTML manual pages will be built and installed
   
                    Default: ``yes''
   
      MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for       MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for
                  programs intended to be run on the compile host, the name,                   programs intended to be run on the compile host, the name,
                  release, and architecture of the host operating system will                   release, and architecture of the host operating system will
Line 191  CONFIGURATION
Line 301  CONFIGURATION
   
                  Default: ``yes''                   Default: ``yes''
   
        MKKDEBUG    Can be set to ``yes'' or ``no''.  Force generation of full-
                    debug symbol versions of all kernels compiled.  Alongside of
                    the netbsd kernel file, an unstripped version netbsd.gdb is
                    created.  This is useful if a cross-gdb is built as well (see
                    MKCROSSGDB).
   
                    Default: ``no''
   
        MKKMOD      Can be set to ``yes'' or ``no''.  Indicates whether kernel
                    modules are built and installed.
   
                    Default: ``yes''
   
      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)       MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)
                  will be run against portions of the NetBSD source code during                   will be run against portions of the NetBSD source code during
                  the build, and whether lint libraries will be installed into                   the build, and whether lint libraries will be installed into
Line 216  CONFIGURATION
Line 339  CONFIGURATION
   
                  Default: ``yes''                   Default: ``yes''
   
                    Note that setting MKOBJ to ``no'' is not recommended and may
                    cause problems when updating the tree with cvs(1).
   
      MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared       MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared
                  objects and libraries will be created and installed during a                   objects and libraries will be created and installed during a
                  build.  If set to ``no'', the entire built system will be                   build.  If set to ``no'', the entire built system will be
                  statically linked.                   statically linked.
   
                  Default: Platform dependent.  As of this writing, all plat-                   Default: Platform dependent.  As of this writing, all
                  forms except sh3 default to ``yes''.                   platforms except sh3 default to ``yes''.
   
      MKPICINSTALL       MKPICINSTALL
                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)                   Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)
Line 239  CONFIGURATION
Line 365  CONFIGURATION
                  by default at times due to toolchain problems with profiled                   by default at times due to toolchain problems with profiled
                  code.                   code.
   
        MKREPRO     Can be set to ``yes'' or ``no''.  Create reproducable builds.
                    This enables different switches to make two builds from the
                    same source tree result in the same build results.
   
                    Default: ``no''
   
      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files       MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files
                  destined to reside in DESTDIR/usr/share will be built and                   destined to reside in DESTDIR/usr/share will be built and
                  installed during a build.  If set to ``no'', then all of                   installed during a build.  If set to ``no'', then all of
Line 247  CONFIGURATION
Line 379  CONFIGURATION
   
                  Default: ``yes''                   Default: ``yes''
   
        MKSTRIPIDENT
                    Can be set to ``yes'' or ``no''.  Indicates whether RCS IDs,
                    for use with ident(1), should be stripped from program
                    binaries and shared libraries.
   
                    Default: ``no''
   
      MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an       MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an
                  unprivileged install will occur.  The user, group, permis-                   unprivileged install will occur.  The user, group,
                  sions, and file flags, will not be set on the installed item;                   permissions, and file flags, will not be set on the installed
                  instead the information will be appended to a file called                   items; instead the information will be appended to a file
                  METALOG in DESTDIR.  The contents of METALOG is used during                   called METALOG in DESTDIR.  The contents of METALOG are used
                  the generation of the distribution tar files to ensure that                   during the generation of the distribution tar files to ensure
                  the appropriate file ownership is stored.                   that the appropriate file ownership is stored.
   
                  Default: ``no''                   Default: ``no''
   
Line 265  CONFIGURATION
Line 404  CONFIGURATION
   
                  Default: ``no''                   Default: ``no''
   
      MKX11       Can be set to ``yes'' or ``no''.  Indicates whether X11R6 is       MKX11       Can be set to ``yes'' or ``no''.  Indicates whether X11 is
                  built from X11SRCDIR.                   built from X11SRCDIR.
   
                  Default: ``no''                   Default: ``no''
   
      TOOLDIR     Directory to hold the host tools, once built.  This directory       TOOLDIR     Directory to hold the host tools, once built.  If specified,
                  should be unique to a given host system and NetBSD source                   must be an absolute path.  This directory should be unique to
                  tree.  (However, multiple targets may share the same TOOLDIR;                   a given host system and NetBSD source tree.  (However,
                  the target-dependent files have unique names.)  If unset, a                   multiple targets may share the same TOOLDIR; the target-
                  default based on the uname(1) information of the host plat-                   dependent files have unique names.)  If unset, a default
                  form will be created in the .OBJDIR of src.                   based on the uname(1) information of the host platform will
                    be created in the .OBJDIR of src.
   
                  Default: Unset.                   Default: Unset.
   
Line 290  CONFIGURATION
Line 430  CONFIGURATION
                         specific for that tool.                          specific for that tool.
   
                  never  Do not use the tools from TOOLDIR, even when building                   never  Do not use the tools from TOOLDIR, even when building
                         native tool components.  This is similar to the tradi-                          native tool components.  This is similar to the
                         tional NetBSD build method, but does not verify that                          traditional NetBSD build method, but does not verify
                         the compilation tools in use are up-to-date enough in                          that the compilation tools in use are up-to-date
                         order to build the tree successfully.  This may cause                          enough in order to build the tree successfully.  This
                         build or runtime problems when building the whole                          may cause build or runtime problems when building the
                         NetBSD source tree.                          whole NetBSD source tree.
   
                  Default: ``yes'' if building all or part of a whole NetBSD                   Default: ``yes'', unless TOOLCHAIN_MISSING is set to ``yes''.
                  source tree (detected automatically); ``no'' otherwise (to  
                  preserve traditional semantics of the <bsd.*.mk> make(1)                   USETOOLS is also set to ``no'' when using <bsd.*.mk> outside
                  include files).                   the NetBSD source tree.
   
        X11SRCDIR   Directory containing the X11R6 source.  If specified, must be
                    an absolute path.  The main X11R6 source is found in
                    X11SRCDIR/xfree/xc.
   
                    Default: NETBSDRCDIR/../xsrc, if that exists; otherwise
                    /usr/xsrc.
   
      X11SRCDIR   Directory containing the X11R6 source.  The main X11R6 source       X11FLAVOUR  The style of X11 cross-built, set to either ``Xorg'' or
                  is found in X11SRCDIR/xfree/xc.                   ``XFree86''.
   
                  Default: ``/usr/xsrc''                   Default: ``Xorg'' on amd64, i386, macppc, shark and sparc64
                    platforms, ``XFree86'' on everything else.
   
    "make" variables for full builds     "make" variables for full builds
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level ``Makefile'' and do not affect
      manually building subtrees of the NetBSD source code.       manually building subtrees of the NetBSD source code.
   
      INSTALLWORLDDIR  Location for the ``make installworld'' target to install       INSTALLWORLDDIR  Location for the ``make installworld'' target to install
                       to.                        to.  If specified, must be an absolute path.
   
                       Default: ``/''                        Default: ``/''
   
Line 322  CONFIGURATION
Line 470  CONFIGURATION
   
                       Default: ``no''                        Default: ``no''
   
      MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in addi-                        If using build.sh, the default is ``yes''.  This may be
                       tion to the effects described for MKUPDATE=yes above,                        set back to ``no'' by giving build.sh the -o option.
                       this implies the effects of NOCLEANDIR (i.e., ``make  
                       cleandir'' is avoided).       MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in
                         addition to the effects described for MKUPDATE=yes
                         above, this implies the effects of NOCLEANDIR (i.e.,
                         ``make cleandir'' is avoided).
   
                       Default: ``no''                        Default: ``no''
   
      NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see                        If using build.sh, this may be set by giving the -u
                       below)                        option.
   
        NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead.  See
                         below.
   
                       Default: Unset.                        Default: Unset.
   
Line 341  CONFIGURATION
Line 495  CONFIGURATION
   
                       Default: Unset.                        Default: Unset.
   
                         See also MKUPDATE.
   
      NODISTRIBDIRS    If set, avoids the ``make distrib-dirs'' phase of a full       NODISTRIBDIRS    If set, avoids the ``make distrib-dirs'' phase of a full
                       build.  This skips running mtree(8) on DESTDIR, useful                        build.  This skips running mtree(8) on DESTDIR, useful
                       on systems where building as an unprivileged user, or                        on systems where building as an unprivileged user, or
Line 355  CONFIGURATION
Line 511  CONFIGURATION
                       because the system include files have changed.  However,                        because the system include files have changed.  However,
                       this option should not be used when updating the entire                        this option should not be used when updating the entire
                       NetBSD source tree arbitrarily; it is suggested to use                        NetBSD source tree arbitrarily; it is suggested to use
                       MKUPDATE=yes in that case.                        MKUPDATE=yes instead in that case.
   
                       Default: Unset.                        Default: Unset.
   
      RELEASEDIR       If set, specifies the directory to which a release(7)       RELEASEDIR       If set, specifies the directory to which a release(7)
                       layout will be written at the end of a ``make release''.                        layout will be written at the end of a ``make release''.
                         If specified, must be an absolute path.
   
                       Default: Unset.                        Default: Unset.
   
                       Note: build.sh will provide a default of releasedir (in                        Note: build.sh will provide a default of releasedir (in
                       the top-level .OBJDIR) unless run in `expert' mode                        the top-level .OBJDIR) unless run in `expert' mode.
   
 BUILDING  BUILDING
    "make" command line options     "make" command line options
      This is only a summary of options available to make(1); only the options       This is not a summary of all the options available to make(1); only the
      used most frequently with NetBSD builds are listed here.       options used most frequently with NetBSD builds are listed here.
   
      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should       -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
                 use .WAIT or have explicit dependancies as necessary to                  use .WAIT or have explicit dependencies as necessary to
                 enforce build ordering.  If you see build failures with -j,                  enforce build ordering.
                 please save complete build logs so the failures can be ana-  
                 lyzed.       -m dir     Specify the default directory for searching for system
                   Makefile segments, mainly the <bsd.*.mk> files.  When building
      -m dir     Specify the default directory for searching for system Make-                  any full NetBSD source tree, this should be set to the
                 file segments, mainly the <bsd.*.mk> files.  When building any                  ``share/mk'' directory in the source tree.  This is set
                 full NetBSD source tree, this should be set to the                  automatically when building from the top level, or when using
                 ``share/mk'' directory in the source tree.  (This is set auto-                  build.sh.
                 matically when building from the top level.)  
   
      -n         Display the commands that would have been executed, but do not       -n         Display the commands that would have been executed, but do not
                 actually execute them.  This will still cause recursion to                  actually execute them.  This will still cause recursion to
Line 391  BUILDING
Line 547  BUILDING
      -V var     Print make(1)'s idea of the value of var.  Does not build any       -V var     Print make(1)'s idea of the value of var.  Does not build any
                 targets.                  targets.
   
      var=value  Set the variable var to value, overriding any setting speci-       var=value  Set the variable var to value, overriding any setting
                 fied by the process environment, the MAKECONF configuration                  specified by the process environment, the MAKECONF
                 file, or the system Makefile segments.                  configuration file, or the system Makefile segments.
   
    "make" targets     "make" targets
      These default targets may be built by running make(1) in any subtree of       These default targets may be built by running make(1) in any subtree of
Line 441  BUILDING
Line 597  BUILDING
      Additional make(1) targets are usable specifically from the top source       Additional make(1) targets are usable specifically from the top source
      level to facilitate building the entire NetBSD source tree.       level to facilitate building the entire NetBSD source tree.
   
      build         Build the entire NetBSD system.  This orders portions of       build         Build the entire NetBSD system (except the kernel).  This
                    the source tree such that prerequisites will be built in                     orders portions of the source tree such that prerequisites
                    the proper order.                     will be built in the proper order.
   
      distribution  Do a ``make build'', and then install a full distribution       distribution  Do a ``make build'', and then install a full distribution
                    into DESTDIR, including files in DESTDIR/dev, DESTDIR/etc,                     (which does not include a kernel) into DESTDIR, including
                    DESTDIR/root and DESTDIR/var.                     files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and
                      DESTDIR/var.
   
      buildworld    As per ``make distribution'', except that it ensures that       buildworld    As per ``make distribution'', except that it ensures that
                    DESTDIR is not the root directory.                     DESTDIR is not the root directory.
   
      installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR       installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR,
                    (which defaults to the root directory).  Ensures that                     which defaults to the root directory.  Ensures that
                    INSTALLWORLDDIR is the not root directory if cross compil-                     INSTALLWORLDDIR is not the root directory if cross
                    ing.                     compiling.
   
                    Note: It is highly recommended that you upgrade your kernel                     The INSTALLSETS environment variable may be set to a space-
                    and reboot before performing this operation.                     separated list of distribution sets to be installed.  By
                      default, all sets except ``etc'' and ``xetc'' are
                      installed, so most files in INSTALLWORLDDIR/etc will not be
                      installed or modified.
   
                      Note: Before performing this operation with
                      INSTALLWORLDDIR=/, it is highly recommended that you
                      upgrade your kernel and reboot.  After performing this
                      operation, it is recommended that you use etcupdate(8) to
                      update files in INSTALLWORLDDIR/etc, and postinstall(8) to
                      check for or fix inconsistencies.
   
      sets          Create distribution sets from DESTDIR into       sets          Create distribution sets from DESTDIR into
                    RELEASEDIR/MACHINE/binary/sets.  Should be run after ``make                     RELEASEDIR/RELEASEMACHINEDIR/binary/sets.  Should be run
                    distribution'' (as ``make build'' does not install all of                     after ``make distribution'', as ``make build'' alone does
                    the required files).                     not install all of the required files.
   
      sourcesets    Create source sets of the source tree into       sourcesets    Create source sets of the source tree into
                    RELEASEDIR/source/sets.                     RELEASEDIR/source/sets.
   
        syspkgs       Create syspkgs from DESTDIR into
                      RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs.  Should be run
                      after ``make distribution'', as ``make build'' alone does
                      not install all of the required files.
   
      release       Do a ``make distribution'', build kernels, distribution       release       Do a ``make distribution'', build kernels, distribution
                    media, and install sets (this as per ``make sets''), and                     media, and install sets (this as per ``make sets''), and
                    then package the system into a standard release layout as                     then package the system into a standard release layout as
                    described by release(7).  This requires that RELEASEDIR be                     described by release(7).  This requires that RELEASEDIR be
                    set (see above).                     set (see above).
   
        iso-image     Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/images directory.  The CD-ROM file system will
                      have a layout as described in release(7).
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based
                      installation program, which can be used to install or
                      upgrade a NetBSD system.  Bootable CD-ROMs also contain
                      tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                      Before ``make iso-image'' is attempted, RELEASEDIR must be
                      populated by ``make release'' or equivalent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom
                      directory by ``make release''.  These smaller images
                      usually contain the same tools as the larger images in
                      RELEASEDIR/images, but do not contain additional content
                      such as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1)
                      utility, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
        iso-image-source
                      Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/images directory.  The CD-ROM file system will
                      have a layout as described in release(7).  It will have top
                      level directories for the machine type and source.
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based
                      installation program, which can be used to install or
                      upgrade a NetBSD system.  Bootable CD-ROMs also contain
                      tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                      Before ``make iso-image-source'' is attempted, RELEASEDIR
                      must be populated by ``make sourcesets release'' or
                      equivalent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom
                      directory by ``make release''.  These smaller images
                      usually contain the same tools as the larger images in
                      RELEASEDIR/images, but do not contain additional content
                      such as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1)
                      utility, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
        install-image
                      Create a bootable NetBSD installation disk image in the
                      RELEASEDIR/RELEASEMACHINEDIR/installation/installimage
                      directory.  The installation disk image is suitable for
                      copying to bootable USB flash memory sticks, etc., for
                      machines which are able to boot from such devices.  The
                      file system in the bootable disk image will have a layout
                      as described in release(7).
   
                      The installation image is bootable, and will automatically
                      run the sysinst(8) menu-based installation program, which
                      can be used to install or upgrade a NetBSD system.  The
                      image also contains tools that may be useful in repairing a
                      damaged NetBSD installation.
   
                      Before ``make install-image'' is attempted, RELEASEDIR must
                      be populated by ``make release'' or equivalent.  The build
                      must have been performed with MKUNPRIVED=yes because ``make
                      install-image'' relies on information in DESTDIR/METALOG.
   
        live-image    Create NetBSD live images in the
                      RELEASEDIR/RELEASEMACHINEDIR/installation/liveimage
                      directory.  The live image contains all necessary files to
                      boot NetBSD up to multi-user mode, including all files
                      which should be extracted during installation, NetBSD
                      disklabel, bootloaders, etc.
   
                      The live image is suitable for use as a disk image in
                      virtual machine environments such as QEMU, and also useful
                      to boot NetBSD from a USB flash memory stick on a real
                      machine, without the need for installation.
   
                      Before ``make live-image'' is attempted, RELEASEDIR must be
                      populated by ``make release'' or equivalent.  The build
                      must have been performed with MKUNPRIVED=yes because ``make
                      install-image'' relies on information in DESTDIR/METALOG.
   
      regression-tests       regression-tests
                    Can only be run after building the regression tests in the                     Can only be run after building the regression tests in the
                    directory ``regress''.  Runs the compiled regression tests                     directory ``regress''.  Runs those compiled regression
                    on the local host.                     tests on the local host.  Note that most tests are now
                      managed instead using atf(7); this target should probably
                      run those as well but currently does not.
   
    The "build.sh" script     The "build.sh" script
      This script file is a Bourne shell script designed to build the entire       This script file is a shell script designed to build the entire NetBSD
      NetBSD system on any host with a Bourne shell in /bin/sh, including many       system on any host with a suitable modern shell and some common
      that are not POSIX compliant.  Note that if a host system's /bin/sh is       utilities.  The required shell features are described under the HOST_SH
      unusually old and broken, the Korn Shell (/bin/ksh), if available, may be       variable.
      a usable alternative.  
        If a host system's default shell does support the required features, then
        we suggest that you explicitly specify a suitable shell using a command
        like
   
              /path/to/suitable/shell build.sh [options]
   
        The above command will usually enable build.sh to automatically set
        HOST_SH=/path/to/suitable/shell, but if that fails, then the following
        set of commands may be used instead:
   
              HOST_SH=/path/to/suitable/shell
              export HOST_SH
              ${HOST_SH} build.sh [options]
   
        If build.sh detects that it is being executed under an unsuitable shell,
        it attempts to exec a suitable shell instead, or prints an error message.
        If HOST_SH is not set explicitly, then build.sh sets a default using
        heuristics dependent on the host platform, or from the shell under which
        build.sh is executed (if that can be determined), or using the first copy
        of sh found in PATH.
   
      All cross-compile builds, and most native builds, of the entire system       All cross-compile builds, and most native builds, of the entire system
      should make use of build.sh rather than just running ``make''.  This way,       should make use of build.sh rather than just running ``make''.  This way,
      the make(1) program will be bootstrapped properly, in case the host sys-       the make(1) program will be bootstrapped properly, in case the host
      tem has an older or incompatible ``make'' program.       system has an older or incompatible ``make'' program.
   
      When compiling the entire system via build.sh, many make(1) variables are       When compiling the entire system via build.sh, many make(1) variables are
      set for you in order to help encapsulate the build process.  In the list       set for you in order to help encapsulate the build process.  In the list
Line 498  BUILDING
Line 784  BUILDING
   
      The following operations are supported by build.sh:       The following operations are supported by build.sh:
   
      build         Build the system as per ``make build''.  This option       build         Build the system as per ``make build''.  Before the main
                    implies the obj and tools operations.                     part of the build commences, this command runs the obj
                      operation (unless the -o option is given), ``make
                      cleandir'' (unless the -u option is given), and the tools
                      operation.
   
      distribution  Build a full distribution as per ``make distribution''.       distribution  Build a full distribution as per ``make distribution''.
                    This option implies the build operation.                     This command first runs the build operation.
   
      release       Build a full release as per ``make release''.  This option       release       Build a full release as per ``make release''.  This command
                    implies the distribution operation.                     first runs the distribution operation.
   
      makewrapper   Create the nbmake-MACHINE wrapper.  This operation is auto-       makewrapper   Create the nbmake-MACHINE wrapper.  This operation is
                    matically performed for any of the other operations.                     automatically performed for any of the other operations.
   
        cleandir      Perform ``make cleandir''.
   
      obj           Perform ``make obj''.       obj           Perform ``make obj''.
   
      tools         Build and install the host tools from src/tools.       tools         Build and install the host tools from src/tools.  This
                      command will first run ``make obj'' and ``make cleandir''
                      in the tools subdirectory unless the -o or -u options
                      (respectively) are given.
   
      install=idir  Install the contents of DESTDIR to idir, using ``make       install=idir  Install the contents of DESTDIR to idir, using ``make
                    installworld''.                     installworld''.  Note that files that are part of the
                      ``etc'' or ``xetc'' sets will not be installed, unless
                      overridden by the INSTALLSETS environment variable.
   
      kernel=kconf  Build a new kernel.  The kconf argument is the name of a       kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                    configuration file suitable for use by config(8).  If kconf                     configuration file suitable for use by config(1).  If kconf
                    does not contain any `/' characters, the configuration file                     does not contain any `/' characters, the configuration file
                    is expected to be found in the KERNCONFDIR directory, which                     is expected to be found in the KERNCONFDIR directory, which
                    is typically sys/arch/MACHINE/conf.  The new kernel will be                     is typically sys/arch/MACHINE/conf.  The new kernel will be
                    built in a subdirectory of KERNOBJDIR, which is typically                     built in a subdirectory of KERNOBJDIR, which is typically
                    sys/arch/MACHINE/compile or an associated object directory.                     sys/arch/MACHINE/compile or an associated object directory.
                    In order to ensure that the kernel is built using up-to-  
                    date tools, it is strongly recommended that the tools be                     This command does not imply the tools command; run the
                    rebuilt (using the tools operation).                     tools command first unless it is certain that the tools
                      already exist and are up to date.
   
                      This command will run ``make cleandir'' on the kernel in
                      question first unless the -u option is given.
   
        kernel.gdb=kconf
                      Build a new kernel with debug information.  Similar to the
                      above kernel=kconf operation, but creates a netbsd.gdb file
                      alongside of the kernel netbsd, which contains a full
                      symbol table and can be used for debugging (for example
                      with a cross-gdb built by MKCROSSGDB).
   
        mkernel=kconf
                      Build a new kernel in modular build.  Similar to the above
                      kernel=kconf operation, but creates intermediate per-module
                      relocatable objects and link them to the final kernel.
   
        kernels       This command will build all kernels defined in port
                      specific release build procedure.
   
                      This command internally calls the kernel=kconf operation
                      for each found kernel configuration file.
   
        mkernels      Similar to the above kernels operation, but builds kernels
                      in modular build.
   
        modules       This command will build kernel modules and install them
                      into DESTDIR.
   
      releasekernel=kconf       releasekernel=kconf
                    Install a gzip(1)ed copy of the kernel built by                     Install a gzip(1)ed copy of the kernel previously built by
                    kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually                     kernel=kconf into
                    as netbsd-kconf.gz, although the ``netbsd'' prefix is                     RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as
                      netbsd-kconf.gz, although the ``netbsd'' prefix is
                    determined from the ``config'' directives in kconf.                     determined from the ``config'' directives in kconf.
   
      sets          Perform ``make sets''.       sets          Perform ``make sets''.
   
      sourcesets    Perform ``make sourcesets''.       sourcesets    Perform ``make sourcesets''.
   
      The following command line options alter the behaviour of the above oper-       syspkgs       Perform ``make syspkgs''.
      ations: The following command line options alter the behaviour of the  
      build.sh operations described above:       iso-image     Perform ``make iso-image''.
   
        iso-image-source
                      Perform ``make iso-image-source''.
   
        install-image
                      Perform ``make install-image''.
   
        live-image    Perform ``make live-image''.
   
      -a arch   Set the value of MACHINE_ARCH to arch.       list-arch     Prints a list of valid MACHINE and MACHINE_ARCH settings,
                      the default MACHINE_ARCH for each MACHINE, and aliases for
                      MACHINE/MACHINE_ARCH pairs, and then exits.  The -m or -a
                      options (or both) may be used to specify glob patterns that
                      will be used to narrow the list of results; for example,
                      ``build.sh -m 'evm*' -a '*arm*' list-arch'' will list all
                      known MACHINE/MACHINE_ARCH values in which either MACHINE
                      or ALIAS matches the pattern `evb*', and MACHINE_ARCH
                      matches the pattern `*arm*'.
   
        The following command line options alter the behaviour of the build.sh
        operations described above:
   
        -a arch   Set the value of MACHINE_ARCH to arch.  See the -m option for
                  more information.
   
      -B buildid       -B buildid
                Set the value of BUILDID to buildid.  This will also append the                 Set the value of BUILDID to buildid.  This will also append the
                build idenfitier to the name of the ``make'' wrapper script so                 build identifier to the name of the ``make'' wrapper script so
                that the resulting name is of the form                 that the resulting name is of the form
                ``nbmake-MACHINE-BUILDID''.                 ``nbmake-MACHINE-BUILDID''.
   
      -D dest   Set the value of DESTDIR to dest.       -C cdextras
                  Append cdextras to the CDEXTRA variable, which is a space-
                  separated list of files or directories that will be added to
                  the CD-ROM image that may be create by the ``iso-image'' or
                  ``iso-image-source'' operations.  Files will be added to the
                  root of the CD-ROM image, whereas directories will be copied
                  recursively.  If relative paths are specified, they will be
                  converted to absolute paths before being used.  Multiple paths
                  may be specified via multiple -C options, or via a single
                  option whose argument contains multiple space-separated paths.
   
        -D dest   Set the value of DESTDIR to dest.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -E        Set `expert' mode.  This overrides various sanity checks, and       -E        Set `expert' mode.  This overrides various sanity checks, and
                allows: DESTDIR does not have to be set to a non-root path for                 allows: DESTDIR does not have to be set to a non-root path for
                builds, and MKUNPRIVED=yes does not have to be set when build-                 builds, and MKUNPRIVED=yes does not have to be set when
                ing as a non-root user.                 building as a non-root user.
   
                Note: It is highly recommended that you know what you are doing                 Note: It is highly recommended that you know what you are doing
                when you use this option.                 when you use this option.
   
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have       -h        Print a help message.
                explicit dependancies as necessary to enforce build ordering.  
                If you see build failures with -j, please save complete build       -j njob   Run up to njob make(1) subjobs in parallel; passed through to
                logs so the failures can be analyzed.                 make(1).  If you see failures for reasons other than running
                  out of memory while using build.sh with -j, please save
      -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.                 complete build logs so the failures can be analyzed.
   
      -m mach   Set the value of MACHINE to mach.  This will also override any                 To achieve the fastest builds, -j values between (1 + the
                value of MACHINE_ARCH in the process environment with a value                 number of CPUs) and (2 * the number of CPUs) are recommended.
                deduced from mach, unless -a is specified, or mach is a special                 Use lower values on machines with limited memory or I/O
                case listed below.  All cross builds require -m, but if unset                 bandwidth.
                on a NetBSD host, the host's value of MACHINE will be detected  
                and used automatically.       -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.  See ``-O
                  obj'' for more information.
                Some machines support multiple values for MACHINE_ARCH.  For a  
                given value of mach, the following MACHINE and MACHINE_ARCH                 For instance, if the source directory is /usr/src, a setting of
                values will result:                 ``-M /usr/obj'' will place build-time files under
                  /usr/obj/usr/src/bin, /usr/obj/usr/src/lib,
                      mach          MACHINE    MACHINE_ARCH                 /usr/obj/usr/src/usr.bin, and so forth.
                      evbmips       evbmips    (not set)  
                      evbmips-eb    evbmips    mipseb                 If a relative path is specified, it will be converted to an
                      evbmips-el    evbmips    mipsel                 absolute path before being used.  build.sh imposes the
                      evbsh3        evbsh3     (not set)                 restriction that the argument to the -M option must not begin
                      evbsh3-eb     evbsh3     sh3eb                 with a ``$'' (dollar sign) character; otherwise it would be too
                      evbsh3-el     evbsh3     sh3el                 difficult to determine whether the value is an absolute or a
                      sbmips        sbmips     (not set)                 relative path.  If the directory does not already exist,
                      sbmips-eb     sbmips     mipseb                 build.sh will create it.
                      sbmips-el     sbmips     mipsel  
        -m mach   Set the value of MACHINE to mach, unless the mach argument is
                  an alias that refers to a MACHINE/MACHINE_ARCH pair, in which
                  case both MACHINE and MACHINE_ARCH are set from the alias.
                  Such aliases are interpreted entirely by build.sh; they are not
                  used by any other part of the build system.  The MACHINE_ARCH
                  setting implied by mach will override any value of MACHINE_ARCH
                  in the process environment, but will not override a value set
                  by the -a option.  All cross builds require -m, but if unset on
                  a NetBSD host, the host's value of MACHINE will be detected and
                  used automatically.
   
                  See the list-arch operation for a way to get a list of valid
                  MACHINE and MACHINE_ARCH settings.
   
      -N noiselevel       -N noiselevel
                Set the ``noisyness'' level of the build, by setting                 Set the ``noisyness'' level of the build, by setting
Line 598  BUILDING
Line 971  BUILDING
                -n''.                 -n''.
   
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will       -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                place the built object files under obj.  For instance, a set-                 place the built object files under obj.  Unsets
                ting of /usr/obj will place build-time files under                 MAKEOBJDIRPREFIX.
                /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and so forth.  
                Unsets MAKEOBJDIRPREFIX.                 For instance, a setting of ``-O /usr/obj'' will place build-
                  time files under /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin,
                  and so forth.
   
                  If a relative path is specified, it will be converted to an
                  absolute path before being used.  build.sh imposes the
                  restriction that the argument to the -O option must not contain
                  a ``$'' (dollar sign) character.  If the directory does not
                  already exist, build.sh will create it.
   
                  In normal use, exactly one of the -M or -O options should be
                  specified.  If neither -M nor -O is specified, then a default
                  object directory will be chosen according to rules in
                  <bsd.obj.mk>.  Relying on this default is not recommended
                  because it is determined by complex rules that are influenced
                  by the values of several variables and by the location of the
                  source directory.
   
                  Note that placing the obj directory location outside of the
                  default source tree hierarchy makes it easier to manually clear
                  out old files in the event the ``make cleandir'' operation is
                  unable to do so.  (See CAVEATS below.)
   
                  Note also that use of one of -M or -O is the only means of
                  building multiple machine architecture userlands from the same
                  source tree without cleaning between builds (in which case, one
                  would specify distinct obj locations for each).
   
      -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be       -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be
                automatically set to ``yes'' (which is opposite to the default                 automatically set to ``yes''.  This default is opposite to the
                behaviour).                 behaviour when not using build.sh.
   
      -R rel    Set the value of RELEASEDIR to rel.       -R rel    Set the value of RELEASEDIR to rel.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -r        Remove the contents of DESTDIR and TOOLDIR before building       -r        Remove the contents of DESTDIR and TOOLDIR before building
                (provides a clean starting point).  This will skip deleting                 (provides a clean starting point).  This will skip deleting
                DESTDIR if building on a native system to the root directory.                 DESTDIR if building on a native system to the root directory.
   
      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap       -S seed   Change the value of BUILDSEED to seed.  This should rarely be
                ``make'' will only be rebuilt as needed (when the source files                 necessary.
                for make(1) change).  
        -T tools  Set the value of TOOLDIR to tools.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.  If set, the bootstrap ``make'' will only be
                  rebuilt if the source files for make(1) have changed.
   
      -U        Set MKUNPRIVED=yes.       -U        Set MKUNPRIVED=yes.
   
Line 626  BUILDING
Line 1031  BUILDING
                propagated to the nbmake wrapper.                 propagated to the nbmake wrapper.
   
      -w wrapper       -w wrapper
                Create the nbmake wrapper script (see below) in a custom loca-                 Create the nbmake wrapper script (see below) in a custom
                tion, specified by wrapper.  This allows, for instance, to                 location, specified by wrapper.  This allows, for instance, to
                place the wrapper in PATH automatically.  Note that wrapper is                 place the wrapper in PATH automatically.  Note that wrapper is
                the full name of the file, not just a directory name.                 the full name of the file, not just a directory name.  If a
                  relative path is specified, it will be converted to an absolute
                  path before being used.
   
      -X x11src       -X x11src
                Set the value of X11SRCDIR to x11src.                 Set the value of X11SRCDIR to x11src.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -x        Set MKX11=yes.       -x        Set MKX11=yes.
   
        -Y extsrcdir
                  Set the value of EXTSRCSRCDIR to extsrcdir.  If a relative path
                  is specified, it will be converted to an absolute path before
                  being used.
   
        -y        Set MKEXTSRC=yes.
   
      -Z var    Unset ("zap") the environment variable var.  This is propagated       -Z var    Unset ("zap") the environment variable var.  This is propagated
                to the nbmake wrapper.                 to the nbmake wrapper.
   
Line 645  BUILDING
Line 1061  BUILDING
      subtrees on a cross-compile host.       subtrees on a cross-compile host.
   
      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call       nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-       the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with
      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.       several key variables pre-set, including MACHINE, MACHINE_ARCH, and
      build.sh will also set variables specified with -V, and unset variables       TOOLDIR.  nbmake-MACHINE will also set variables specified with -V, and
      specified with -Z.       unset variables specified with -Z.
   
      This script can be symlinked into a directory listed in PATH, or called       This script can be symlinked into a directory listed in PATH, or called
      with an absolute path.       with an absolute path.
   
 EXAMPLES  EXAMPLES
      1.   % ./build.sh tools kernel=GENERIC       1.   % ./build.sh [options] tools kernel=GENERIC
   
           Build a new toolchain, and use the new toolchain to configure and            Build a new toolchain, and use the new toolchain to configure and
           build a new GENERIC kernel.            build a new GENERIC kernel.
   
      2.   % ./build.sh -U distribution       2.   % ./build.sh [options] -U distribution
   
           Using unprivileged mode, build a complete distribution to a DESTDIR            Using unprivileged mode, build a complete distribution to a DESTDIR
           directory that build.sh selects (and will display).            directory that build.sh selects (and will display).
   
      3.   # ./build.sh -U install=/       3.   # ./build.sh [options] -U install=/
   
           As root, install to / the distribution that was built by example 2.            As root, install to / the distribution that was built by example 2.
           Even though this is run as root, -U is required so that the permis-            Even though this is run as root, -U is required so that the
           sions stored in DESTDIR/METALOG are correctly applied to the files            permissions stored in DESTDIR/METALOG are correctly applied to the
           as they're copied to /.            files as they're copied to /.
   
      4.   % ./build.sh -U -u release       4.   % ./build.sh [options] -U -u release
   
           Using unprivileged mode, build a complete release to DESTDIR and            Using unprivileged mode, build a complete release to DESTDIR and
           RELEASEDIR directories that build.sh selects (and will display).            RELEASEDIR directories that build.sh selects (and will display).
Line 680  EXAMPLES
Line 1096  EXAMPLES
           of the release build.            of the release build.
   
 OBSOLETE VARIABLES  OBSOLETE VARIABLES
      NBUILDJOBS  Use the make(1) option -j, instead.       NBUILDJOBS  Use the make(1) option -j instead.
   
      USE_NEW_TOOLCHAIN       USE_NEW_TOOLCHAIN
                  The new toolchain is now the default.  To disable, use                   The new toolchain is now the default.  To disable, use
                  TOOLCHAIN_MISSING=yes.                   TOOLCHAIN_MISSING=yes.
   
 SEE ALSO  SEE ALSO
      make(1), hier(7), release(7)       make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),
        pkgsrc/sysutils/cdrtools
   
 HISTORY  HISTORY
      The build.sh based build scheme was introduced for NetBSD 1.6 as       The build.sh based build scheme was introduced for NetBSD 1.6 as
      USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.       USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
   
 BUGS  CAVEATS
      A few platforms are not yet using this build system.       After significant updates to third-party components in the source tree,
        the ``make cleandir'' operation may be insufficient to clean out old
        files in object directories.  Instead, one may have to manually remove
        the files.  Consult the UPDATING file for notices concerning this.
   
 NetBSD                         February 6, 2003                         NetBSD  NetBSD                          August 7, 2014                          NetBSD

Legend:
Removed from v.1.49  
changed lines
  Added in v.1.117

CVSweb <webmaster@jp.NetBSD.org>