[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.16 and 1.130

version 1.16, 2002/10/20 15:48:40 version 1.130, 2017/12/29 03:05:13
Line 1 
Line 1 
 BUILDING(8)             NetBSD System Manager's Manual             BUILDING(8)  BUILDING(8)                 System Manager's Manual                BUILDING(8)
   
 NAME  NAME
      BUILDING - Procedure for building NetBSD from source code.       BUILDING - Procedure for building NetBSD from source code.
   
 STATUS  
      This document is a work-in-progress.  As such, the information described  
      here may not match the reality of the build system as of this writing.  
      Once this document is completely in sync with reality, this paragraph  
      will be removed.  
   
      Discrepancies between this documentation and the current reality of im-  
      plementation are noted specially, as with the note below:  
   
      Note: This document applies only to platforms which use the new toolchain  
      as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.  
      Platforms which have not yet been switched to the new toolchain should  
      continue building traditionally, using the notes specified in the file  
      UPDATING.  
   
 REQUIREMENTS  REQUIREMENTS
      NetBSD is designed to be buildable on most POSIX-compliant host systems.       NetBSD is designed to be buildable on most POSIX-compliant host systems.
      The basic build procedure is the same whether compiling natively (on the       The basic build procedure is the same whether compiling natively (on the
      same NetBSD architecture) or cross compiling (on another architecture or       same NetBSD architecture) or cross compiling (on another architecture or
      OS).       OS).
   
      This source tree contains a special subtree, ``tools'', which uses the       This source tree contains a special subtree, "tools", which uses the host
      host system to create a build toolchain for the target architecture.  The       system to create a build toolchain for the target architecture.  The host
      host system must have at least C and C++ compilers in order to create the       system must have at least C and C++ compilers in order to create the
      toolchain (make is not required); all other tools are created as part of       toolchain (make is not required); all other tools are created as part of
      the NetBSD build process.       the NetBSD build process.  (See the environment variables section below
        if you need to override or manually select your compilers.)
            Note: A couple host toolchain components are not yet available in  
            the tools directory.  Also, some tools use non-POSIX, non-ANSI C  
            extensions and need to be standardized.  As a result, cross-compil-  
            ing from systems other than NetBSD is not currently supported.  
   
 FILES  FILES
    Source tree layout     Source tree layout
        doc/BUILDING.mdoc
      BUILDING.mdoc  This document (in -mdoc troff format; the original copy).                      This document (in -mdoc troff format; the original copy).
   
      BUILDING       This document (in plaintext).       BUILDING       This document (in plaintext).
   
      Makefile       The main Makefile for NetBSD; should only be run for na-       tools/compat/README
                     tive builds with an appropriately up-to-date version of                      Special notes for cross-hosting a NetBSD build on non-
                     NetBSD make(1).  (For building from out-of-date systems or                      NetBSD platforms.
                     on a non-native host, see the build.sh shell script.)  
        Makefile       The main Makefile for NetBSD; should only be run for
                       native builds with an appropriately up-to-date version of
                       NetBSD make(1).  Intended for expert use with knowlege of
                       its shortcomings, it has been superseded by the build.sh
                       shell script as the recommended means for building NetBSD.
   
      UPDATING       Special notes for updating from an earlier revision of       UPDATING       Special notes for updating from an earlier revision of
                     NetBSD.  It is important to read this file before every                      NetBSD.  It is important to read this file before every
Line 54  FILES
Line 40  FILES
      build.sh       Bourne-compatible shell script used for building the host       build.sh       Bourne-compatible shell script used for building the host
                     build tools and the NetBSD system from scratch.  Can be                      build tools and the NetBSD system from scratch.  Can be
                     used for both native and cross builds, and should be used                      used for both native and cross builds, and should be used
                     instead of make(1) for any source tree that is updated and                      instead of make(1) as it performs additional checks to
                     recompiled regularly.                      prevent common issues going undetected, such as building
                       with an outdated version of make(1).
   
      crypto/dist/, dist/, gnu/dist/       crypto/dist/, dist/, gnu/dist/
                     Sources imported verbatim from third parties, without man-                      Sources imported verbatim from third parties, without
                     gling the existing build structure.  Other source trees in                      mangling the existing build structure.  Other source trees
                     bin through usr.sbin use the NetBSD make(1) ``reachover''                      in bin through usr.sbin use the NetBSD make(1) "reachover"
                     Makefile semantics when building these programs for a na-                      Makefile semantics when building these programs for a
                     tive host.                      native host.
   
        external, sys/external
                       Sources and build infrastructure for components imported
                       (mostly) unchanged from upstream maintainers, sorted by
                       applicable license.  This is (slowly) replacing the
                       crypto/dist, dist, and gnu/dist directories.
   
      distrib/, etc/       distrib/, etc/
                     Sources for items used when making a full release snap-                      Sources for items used when making a full release
                     shot, such as files installed in /etc on the destination                      snapshot, such as files installed in DESTDIR/etc on the
                     system, boot media, and release notes.                      destination system, boot media, and release notes.
   
      regress/       Regression test harness.  Can be cross-compiled, but only       tests/, regress/
                     run natively.                      Regression test harness.  Can be cross-compiled, but only
                       run natively.  tests/ uses the atf(7) test framework;
                       regress/ contains older tests that have not yet been
                       migrated to atf(7).
   
      sys/           NetBSD kernel sources.       sys/           NetBSD kernel sources.
   
      tools/         ``Reachover'' build structure for the host build tools.       tools/         "Reachover" build structure for the host build tools.
                     This has a special method of determining out-of-date sta-                      This has a special method of determining out-of-date
                     tus.                      status.
   
      bin/ ... usr.sbin/       bin/ ... usr.sbin/
                     Sources to the NetBSD userland (non-kernel) programs.  If                      Sources to the NetBSD userland (non-kernel) programs.  If
                     any of these directories are missing, they will be skipped                      any of these directories are missing, they will be skipped
                     during the build.                      during the build.
   
        external/mit/xorg/
                       "Reachover" build structure for modular Xorg; the source
                       is in X11SRCDIR.
   
        extsrc/        "Reachover" build structure for externally added programs
                       and libraries; the source is in EXTSRCSRCDIR.
   
    Build tree layout     Build tree layout
      The NetBSD build tree is described in hier(7), and the release layout is       The NetBSD build tree is described in hier(7), and the release layout is
      described in release(7).       described in release(7).
Line 91  CONFIGURATION
Line 94  CONFIGURATION
    Environment variables     Environment variables
      Several environment variables control the behaviour of NetBSD builds.       Several environment variables control the behaviour of NetBSD builds.
   
      MACHINE           Machine type.       HOST_SH           Path name to a shell available on the host system and
                          suitable for use during the build.  The NetBSD build
                          system requires a modern Bourne-like shell with POSIX-
                          compliant features, and also requires support for the
                          "local" keyword to declare local variables in shell
                          functions (which is a widely-implemented but non-
                          standardised feature).
   
                          Depending on the host system, a suitable shell may be
                          /bin/sh, /usr/xpg4/bin/sh, /bin/ksh (provided it is a
                          variant of ksh that supports the "local" keyword, such
                          as ksh88, but not ksh93), or /usr/local/bin/bash.
   
                          Most parts of the build require HOST_SH to be an
                          absolute path; however, build.sh allows it to be a
                          simple command name, which will be converted to an
                          absolute path by searching the PATH.
   
      MACHINE_ARCH      Machine architecture.       HOST_CC           Path name to C compiler used to create the toolchain.
   
      MAKE              Path name to invoke make(1) as.       HOST_CXX          Path name to C++ compiler used to create the toolchain.
   
        MACHINE           Machine type, e.g., "macppc".
   
        MACHINE_ARCH      Machine architecture, e.g., "powerpc".
   
      MAKEFLAGS         Flags to invoke make(1) with.       MAKE              Path name to invoke make(1) as.
   
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MAKEFLAGS         Flags to invoke make(1) with.  Note that build.sh
                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.                         ignores the value of MAKEFLAGS passed in the
                        MAKEOBJDIR can only be provided in the environment.                         environment, but allows MAKEFLAGS to be set via the -V
                          option.
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If  
                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used       MAKEOBJDIR        Directory to use as the .OBJDIR for the current
                        as the .OBJDIR for the current directory.  The current                         directory.  The value is subjected to variable
                        directory may be read only.  MAKEOBJDIRPREFIX can only                         expansion by make(1).  Typical usage is to set this
                        be provided in the environment.                         variable to a value involving the use of
                          `${.CURDIR:S...}' or `${.CURDIR:C...}', to derive the
                          value of .OBJDIR from the value of .CURDIR.  Used only
                          if MAKEOBJDIRPREFIX is not defined.  MAKEOBJDIR can be
                          provided only in the environment or via the -O flag of
                          build.sh; it cannot usefully be set inside a Makefile,
                          including mk.conf or ${MAKECONF}.
   
        MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  The
                          value is subjected to variable expansion by make(1).
                          build.sh will create the ${MAKEOBJDIRPREFIX} directory
                          if necessary, but if make(1) is used without build.sh,
                          then rules in <bsd.obj.mk> will abort the build if the
                          ${MAKEOBJDIRPREFIX} directory does not exist.  If the
                          value is defined and valid, then
                          ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the .OBJDIR
                          for the current directory.  The current directory may
                          be read only.  MAKEOBJDIRPREFIX can be provided only in
                          the environment or via the -M flag of build.sh; it
                          cannot usefully be set inside a Makefile, including
                          mk.conf or ${MAKECONF}.
   
    "make" variables     "make" variables
      Several variables control the behavior of NetBSD builds.  Unless other-       Several variables control the behavior of NetBSD builds.  Unless
      wise specified, these variables may be set in either the process environ-       otherwise specified, these variables may be set in either the process
      ment or the make(1) configuration file specified by MAKECONF.       environment or the make(1) configuration file specified by MAKECONF.
   
      BUILDID     Identifier for the build.  The identifier will be appended to       BUILDID     Identifier for the build.  If set, this should be a short
                  object directory names, and can be consulted in the make(1)                   string that is suitable for use as part of a file or
                  configuration file in order to set additional build parame-                   directory name.  The identifier will be appended to object
                  ters, such as compiler flags.                   directory names, and can be consulted in the make(1)
                    configuration file in order to set additional build
      DESTDIR     Directory to contain the built NetBSD system.  If set, spe-                   parameters, such as compiler flags.  It will also be used as
                  cial options are passed to the compilation tools to prevent                   part of the kernel version string, which can be printed by
                  their default use of the host system's /usr/include,                   "uname -v".
                  /usr/lib, and so forth.  This pathname should not end with a  
                  slash (/) character (for installation into the system's root                   Default: Unset.
                  directory, set DESTDIR to an empty string).  The directory  
                  must reside on a file system which supports long file names  
                  and hard links.  
   
                  Default: Empty string if USETOOLS is ``yes''; unset other-       BUILDINFO   This may be a multi-line string containing information about
                  wise.                   the build.  This will appear in DESTDIR/etc/release, and it
                    will be stored in the buildinfo variable in any kernels that
                    are built.  When such kernels are booted, the sysctl(7)
                    kern.buildinfo variable will report this value.  The string
                    may contain backslash escape sequences, such as "\\"
                    (representing a backslash character) and "\n" (representing a
                    newline).
   
                    Default: Unset.
   
        BUILDSEED   GCC uses random numbers when compiling C++ code.  This
                    variable seeds the gcc random number generator using the
                    -frandom-seed flag with this value.  By default, it is set to
                    NetBSD-(majorversion).  Using a fixed value causes C++
                    binaries to be the same when built from the same sources,
                    resulting in identical (reproducible) builds.  Additional
                    information is available in the GCC documentation of
                    -frandom-seed.
   
        DESTDIR     Directory to contain the built NetBSD system.  If set,
                    special options are passed to the compilation tools to
                    prevent their default use of the host system's /usr/include,
                    /usr/lib, and so forth.  This pathname must be an absolute
                    path, and should not end with a slash (/) character.  (For
                    installation into the system's root directory, set DESTDIR to
                    an empty string, not to "/").  The directory must reside on a
                    file system which supports long file names and hard links.
   
                    Default: Empty string if USETOOLS is "yes"; unset otherwise.
   
                    Note: build.sh will provide a default of destdir.MACHINE (in
                    the top-level .OBJDIR) unless run in `expert' mode.
   
        EXTSRCSRCDIR
                    Directory containing sources of externally added programs and
                    libraries.  If specified, must be an absolute path.
   
                    Default: NETBSDRCDIR/../extsrc, if that exists; otherwise
                    /usr/extsrc.
   
      MAKECONF    The name of the make(1) configuration file.  Only settable in       MAKECONF    The name of the make(1) configuration file.  Only settable in
                  the process environment.                   the process environment.
   
                  Default: ``/etc/mk.conf''                   Default: "/etc/mk.conf"
   
        MAKEVERBOSE
                    Level of verbosity of status messages.  Supported values:
   
                    0    No descriptive messages or commands executed by make(1)
                         are shown.
   
                    1    Brief messages are shown describing what is being done,
                         but the actual commands executed by make(1) are not
                         displayed.
   
                    2    Descriptive messages are shown as above (prefixed with a
                         `#'), and ordinary commands performed by make(1) are
                         displayed.
   
                    3    In addition to the above, all commands performed by
                         make(1) are displayed, even if they would ordinarily
                         have been hidden through use of the "@" prefix in the
                         relevant makefile.
   
                    4    In addition to the above, commands executed by make(1)
                         are traced through use of the sh(1) "-x" flag.
   
                    Default: 2
   
      MKCATPAGES  Can be set to ``yes'' or ``no''.  Indicates whether prefor-       MKCATPAGES  Can be set to "yes" or "no".  Indicates whether preformatted
                  matted plaintext manual pages will be created during a build.                   plaintext manual pages will be created during a build.
   
                  Default: ``yes''                   Default: "no"
   
      MKCRYPTO    Can be set to ``yes'' or ``no''.  Indicates whether crypto-       MKCROSSGDB  Can be set to "yes" or "no".  Create a cross-gdb as a host
                  graphic code will be included in a build; provided for the                   tool.
                  benefit of countries that do not allow strong cryptography.  
                  Will not affect use of the standard low-security password en-  
                  cryption system, crypt(3).  
   
                  Default: ``yes''                   Default: "no"
   
      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system       MKDEBUG     Can be set to "yes" or "no".  Indicates whether debug
                  documentation destined for /usr/share/doc will be installed                   information should be generated for all userland binaries
                  during a build.                   compiled.  The result is collected as an additional debug.tgz
                    and xdebug.tgz set and installed in /usr/libdata/debug.
   
                  Default: ``yes''                   Default: "no"
   
      MKHOSTOBJ   Can be set to ``yes'' or ``no''.  If set to ``yes'', then for       MKDEBUGLIB  Can be set to "yes" or "no".  Indicates whether debug
                    information (see MKDEBUG) should also be generated for all
                    libraries build.
   
                    Default: "no"
   
        MKDOC       Can be set to "yes" or "no".  Indicates whether system
                    documentation destined for DESTDIR/usr/share/doc will be
                    installed during a build.
   
                    Default: "yes"
   
        MKEXTSRC    Can be set to "yes" or "no".  Indicates whether extsrc is
                    built from EXTSRCSRCDIR.
   
                    Default: "no"
   
        MKHTML      Can be set to "yes" or "no".  Indicates whether preformatted
                    HTML manual pages will be built and installed
   
                    Default: "yes"
   
        MKHOSTOBJ   Can be set to "yes" or "no".  If set to "yes", then for
                  programs intended to be run on the compile host, the name,                   programs intended to be run on the compile host, the name,
                  release, and architecture of the host operating system will                   release, and architecture of the host operating system will
                  be suffixed to the name of the object directory created by                   be suffixed to the name of the object directory created by
                  ``make obj''.  (This allows multiple host systems to compile                   "make obj".  (This allows multiple host systems to compile
                  NetBSD for a single target.)  If set to ``no'', then programs                   NetBSD for a single target.)  If set to "no", then programs
                  built to be run on the compile host will use the same object                   built to be run on the compile host will use the same object
                  directory names as programs built to be run on the target.                   directory names as programs built to be run on the target.
   
                  Default: ``no''                   Default: "no"
   
      MKINFO      Can be set to ``yes'' or ``no''.  Indicates whether GNU Info       MKINFO      Can be set to "yes" or "no".  Indicates whether GNU Info
                  files, used for the documentation for most of the compilation                   files, used for the documentation for most of the compilation
                  tools, will be created and installed during a build.                   tools, will be created and installed during a build.
   
                  Default: ``yes''                   Default: "yes"
   
        MKKDEBUG    Can be set to "yes" or "no".  Force generation of full-debug
                    symbol versions of all kernels compiled.  Alongside of the
                    netbsd kernel file, an unstripped version netbsd.gdb is
                    created.  This is useful if a cross-gdb is built as well (see
                    MKCROSSGDB).
   
                    Default: "no"
   
        MKKMOD      Can be set to "yes" or "no".  Indicates whether kernel
                    modules are built and installed.
   
                    Default: "yes"
   
      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)       MKLINT      Can be set to "yes" or "no".  Indicates whether lint(1) will
                  will be run against portions of the NetBSD source code during                   be run against portions of the NetBSD source code during the
                  the build, and whether lint libraries will be installed into                   build, and whether lint libraries will be installed into
                  /usr/libdata/lint.                   DESTDIR/usr/libdata/lint.
   
                  Default: ``yes''                   Default: "yes"
   
      MKMAN       Can be set to ``yes'' or ``no''.  Indicates whether manual       MKMAN       Can be set to "yes" or "no".  Indicates whether manual pages
                  pages will be installed during a build.                   will be installed during a build.
   
                  Default: ``yes''                   Default: "yes"
   
      MKNLS       Can be set to ``yes'' or ``no''.  Indicates whether Native       MKNLS       Can be set to "yes" or "no".  Indicates whether Native
                  Language System locale zone files will be compiled and in-                   Language System locale zone files will be compiled and
                  stalled during a build.                   installed during a build.
   
                  Default: ``yes''                   Default: "yes"
   
      MKOBJ       Can be set to ``yes'' or ``no''.  Indicates whether object       MKOBJ       Can be set to "yes" or "no".  Indicates whether object
                  directories will be created when running ``make obj''.  If                   directories will be created when running "make obj".  If set
                  set to ``no'', then all built files will be located inside                   to "no", then all built files will be located inside the
                  the regular source tree.                   regular source tree.
   
                  Default: ``yes''                   Default: "yes"
   
      MKPIC       Can be set to ``yes'' or ``no''.  Indicates whether shared                   Note that setting MKOBJ to "no" is not recommended and may
                    cause problems when updating the tree with cvs(1).
   
        MKPIC       Can be set to "yes" or "no".  Indicates whether shared
                  objects and libraries will be created and installed during a                   objects and libraries will be created and installed during a
                  build.  If set to ``no'', the entire built system will be                   build.  If set to "no", the entire built system will be
                  statically linked.                   statically linked.
   
                  Default: Platform dependent.  As of this writing, all plat-                   Default: Platform dependent.  As of this writing, all
                  forms except sh3 default to ``yes''.                   platforms except m68000 default to "yes".
   
      MKPICINSTALL       MKPICINSTALL
                  Can be set to ``yes'' or ``no''.  Indicates whether the ar(1)                   Can be set to "yes" or "no".  Indicates whether the ar(1)
                  format libraries (lib*_pic.a), used to generate shared li-                   format libraries (lib*_pic.a), used to generate shared
                  braries, are installed during a build.                   libraries, are installed during a build.
   
                  Default: ``yes''                   Default: "yes"
   
      MKPROFILE   Can be set to ``yes'' or ``no''.  Indicates whether profiled       MKPROFILE   Can be set to "yes" or "no".  Indicates whether profiled
                  libraries (lib*_p.a) will be built and installed during a                   libraries (lib*_p.a) will be built and installed during a
                  build.                   build.
   
                  Default: ``yes''; however, some platforms turn off MKPROFILE                   Default: "yes"; however, some platforms turn off MKPROFILE by
                  by default at times due to toolchain problems with profiled                   default at times due to toolchain problems with profiled
                  code.                   code.
   
      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files       MKREPRO     Can be set to "yes" or "no".  Create reproducible builds.
                  destined to reside in /usr/share will be built and installed                   This enables different switches to make two builds from the
                  during a build.  If set to ``no'', then all of MKCATPAGES,                   same source tree result in the same build results.
                  MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon-  
                  ditionally.                   Default: "no" This may be set to "yes" by giving build.sh the
                    -P option.
                  Default: ``yes''  
        MKREPRO_TIMESTAMP
      TOOLDIR     Directory to hold the host tools, once built.  This directory                   Unix timestamp.  When MKREPRO is set, the timestamp of all
                  should be unique to a given host system and NetBSD source                   files in the sets will be set to this value.
                  tree.  (However, multiple targets may share the same TOOLDIR;  
                  the target-dependent files have unique names.)  If unset, a                   Default: Unset.  This may be set automatically to the latest
                  default based on the uname(1) information of the host plat-                   source tree timestamp using cvslatest(1) by giving build.sh
                  form will be created in the .OBJDIR of src/tools.                   the -P option.
   
                  Default: Unset.       MKSHARE     Can be set to "yes" or "no".  Indicates whether files
                    destined to reside in DESTDIR/usr/share will be built and
      UNPRIVED    If set, then an unprivileged install will occur.  The user,                   installed during a build.  If set to "no", then all of
                  group, permissions, and file flags, will not be set on the                   MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to
                  installed item; instead the information will be appended to a                   "no" unconditionally.
                  file called METALOG in DESTDIR.  The contents of METALOG is  
                  used during the generation of the distribution tar files to                   Default: "yes"
                  ensure that the appropriate file ownership is stored.  
        MKSTRIPIDENT
                  Default: Unset.                   Can be set to "yes" or "no".  Indicates whether RCS IDs, for
                    use with ident(1), should be stripped from program binaries
      UPDATE      If set, then all install operations intended to write to                   and shared libraries.
                  DESTDIR will compare file timestamps before installing, and  
                  skip the install phase if the destination files are up-to-                   Default: "no"
                  date.  This also has implications on full builds (see next  
                  subsection).       MKSTRIPSYM  Can be set to "yes" or "no".  Indicates whether all local
                    symbols should be stripped from shared libraries.  If "yes",
                    strip all local symbols from shared libraries; the affect is
                    equivalent to the -x option of ld(1).  If "no", strip only
                    temporary local symbols; the affect is equivalent to the -X
                    option of ld(1).  Keeping non-temporary local symbols such as
                    static function names is useful on using DTrace for userland
                    libraries and getting a backtrace from a rump kernel loading
                    shared libraries.
   
                    Default: "yes"
   
        MKUNPRIVED  Can be set to "yes" or "no".  Indicates whether an
                    unprivileged install will occur.  The user, group,
                    permissions, and file flags, will not be set on the installed
                    items; instead the information will be appended to a file
                    called METALOG in DESTDIR.  The contents of METALOG are used
                    during the generation of the distribution tar files to ensure
                    that the appropriate file ownership is stored.
   
                    Default: "no"
   
        MKUPDATE    Can be set to "yes" or "no".  Indicates whether all install
                    operations intended to write to DESTDIR will compare file
                    timestamps before installing, and skip the install phase if
                    the destination files are up-to-date.  This also has
                    implications on full builds (see next subsection).
   
                    Default: "no"
   
        MKX11       Can be set to "yes" or "no".  Indicates whether X11 is built
                    from X11SRCDIR.
   
                    Default: "no"
   
        TOOLDIR     Directory to hold the host tools, once built.  If specified,
                    must be an absolute path.  This directory should be unique to
                    a given host system and NetBSD source tree.  (However,
                    multiple targets may share the same TOOLDIR; the target-
                    dependent files have unique names.)  If unset, a default
                    based on the uname(1) information of the host platform will
                    be created in the .OBJDIR of src.
   
                  Default: Unset.                   Default: Unset.
   
      USETOOLS    Indicates whether the tools specified by TOOLDIR should be       USETOOLS    Indicates whether the tools specified by TOOLDIR should be
                  used as part of a build in progress.  Must be set to ``yes''                   used as part of a build in progress.  Must be set to "yes" if
                  if cross-compiling.                   cross-compiling.
   
                  yes    Use the tools from TOOLDIR.                   yes    Use the tools from TOOLDIR.
   
Line 265  CONFIGURATION
Line 444  CONFIGURATION
                         specific for that tool.                          specific for that tool.
   
                  never  Do not use the tools from TOOLDIR, even when building                   never  Do not use the tools from TOOLDIR, even when building
                         native tool components.  This is similar to the tradi-                          native tool components.  This is similar to the
                         tional NetBSD build method, but does not verify that                          traditional NetBSD build method, but does not verify
                         the compilation tools in use are up-to-date enough in                          that the compilation tools in use are up-to-date
                         order to build the tree successfully.  This may cause                          enough in order to build the tree successfully.  This
                         build or runtime problems when building the whole                          may cause build or runtime problems when building the
                         NetBSD source tree.                          whole NetBSD source tree.
   
                  Default: ``yes'' if building all or part of a whole NetBSD                   Default: "yes", unless TOOLCHAIN_MISSING is set to "yes".
                  source tree (detected automatically); ``no'' otherwise (to  
                  preserve traditional semantics of the <bsd.*.mk> make(1) in-                   USETOOLS is also set to "no" when using <bsd.*.mk> outside
                  clude files).                   the NetBSD source tree.
   
        X11SRCDIR   Directory containing the modular Xorg source.  If specified,
                    must be an absolute path.  The main modular Xorg source is
                    found in X11SRCDIR/external/mit.
   
                    Default: NETBSDRCDIR/../xsrc, if that exists; otherwise
                    /usr/xsrc.
   
    "make" variables for full builds     "make" variables for full builds
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level "Makefile" and do not affect
      manually building subtrees of the NetBSD source code.       manually building subtrees of the NetBSD source code.
   
      MKOBJDIRS      Can be set to ``yes'' or ``no''.  Indicates whether object       INSTALLWORLDDIR  Location for the "make installworld" target to install
                     directories will be created automatically (via a ``make                        to.  If specified, must be an absolute path.
                     obj'' pass) at the start of a build.  
                         Default: "/"
   
        MKOBJDIRS        Can be set to "yes" or "no".  Indicates whether object
                         directories will be created automatically (via a "make
                         obj" pass) at the start of a build.
   
                         Default: "no"
   
                     Default: ``yes''                        If using build.sh, the default is "yes".  This may be
                         set back to "no" by giving build.sh the -o option.
   
      NBUILDJOBS     Now obsolete.  Use the make(1) option -j, instead (see be-       MKUPDATE         Can be set to "yes" or "no".  If set, then in addition
                     low)                        to the effects described for MKUPDATE=yes above, this
                         implies the effects of NOCLEANDIR (i.e., "make cleandir"
                         is avoided).
   
                     Default: Unset.                        Default: "no"
   
      NOCLEANDIR     If set, avoids the ``make cleandir'' phase of a full                        If using build.sh, this may be set by giving the -u
                     build.  This has the effect of allowing only changed files                        option.
                     in a source tree to be recompiled.  This can speed up  
                     builds when updating only a few files in the tree.  
   
                     Default: Unset.       NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead.  See
                         below.
   
      NODISTRIBDIRS  If set, avoids the ``make distrib-dirs'' phase of a full                        Default: Unset.
                     build.  This skips running mtree(8) on DESTDIR, useful on  
                     systems where building as an unprivileged user, or where  
                     it is known that the system-wide mtree files have not  
                     changed.  
   
                     Default: Unset.       NOCLEANDIR       If set, avoids the "make cleandir" phase of a full
                         build.  This has the effect of allowing only changed
                         files in a source tree to be recompiled.  This can speed
                         up builds when updating only a few files in the tree.
   
      NOINCLUDES     If set, avoids the ``make includes'' phase of a full                        Default: Unset.
                     build.  This has the effect of preventing make(1) from  
                     thinking that some programs are out-of-date simply because  
                     the system include files have changed.  However, this op-  
                     tion should not be used when updating the entire NetBSD  
                     source tree arbitrarily; it is suggested to use UPDATE in  
                     that case.  
   
                     Default: Unset.                        See also MKUPDATE.
   
      RELEASEDIR     If set, specifies the directory to which a release(7) lay-       NODISTRIBDIRS    If set, avoids the "make distrib-dirs" phase of a full
                     out will be written at the end of a ``make release''.                        build.  This skips running mtree(8) on DESTDIR, useful
                         on systems where building as an unprivileged user, or
                         where it is known that the system-wide mtree files have
                         not changed.
   
                     Default: Unset.                        Default: Unset.
   
      UPDATE         If set, then in addition to the effects described for UP-       NOINCLUDES       If set, avoids the "make includes" phase of a full
                     DATE above, this implies the effects of NOCLEANDIR.                        build.  This has the effect of preventing make(1) from
                         thinking that some programs are out-of-date simply
                         because the system include files have changed.  However,
                         this option should not be used when updating the entire
                         NetBSD source tree arbitrarily; it is suggested to use
                         MKUPDATE=yes instead in that case.
   
                         Default: Unset.
   
        RELEASEDIR       If set, specifies the directory to which a release(7)
                         layout will be written at the end of a "make release".
                         If specified, must be an absolute path.
   
                         Default: Unset.
   
                         Note: build.sh will provide a default of releasedir (in
                         the top-level .OBJDIR) unless run in `expert' mode.
   
 BUILDING  BUILDING
    "make" command line options     "make" command line options
      This is only a summary of options available to make(1); only the options       This is not a summary of all the options available to make(1); only the
      used most frequently with NetBSD builds are listed here.       options used most frequently with NetBSD builds are listed here.
   
      -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should       -j njob    Run up to njob make(1) subjobs in parallel.  Makefiles should
                 use .WAIT or have explicit dependancies as necessary to en-                  use .WAIT or have explicit dependencies as necessary to
                 force build ordering.  If you see build failures with -j,                  enforce build ordering.
                 please save complete build logs so the failures can be ana-  
                 lyzed.       -m dir     Specify the default directory for searching for system
                   Makefile segments, mainly the <bsd.*.mk> files.  When building
      -m dir     Specify the default directory for searching for system Make-                  any full NetBSD source tree, this should be set to the
                 file segments, mainly the <bsd.*.mk> files.  When building any                  "share/mk" directory in the source tree.  This is set
                 full NetBSD source tree, this should be set to the                  automatically when building from the top level, or when using
                 ``share/mk'' directory in the source tree.  (This is set auto-                  build.sh.
                 matically when building from the top level.)  
   
      -n         Display the commands that would have been executed, but do not       -n         Display the commands that would have been executed, but do not
                 actually execute them.  This will still cause recursion to                  actually execute them.  This will still cause recursion to
                 take place.                  take place.
   
      -v var     Print make(1)'s idea of the value of var.  Does not build any       -V var     Print make(1)'s idea of the value of var.  Does not build any
                 targets.                  targets.
   
      var=value  Set the variable var to value, overriding any setting speci-       var=value  Set the variable var to value, overriding any setting
                 fied by the process environment, the MAKECONF configuration                  specified by the process environment, the MAKECONF
                 file, or the system Makefile segments.                  configuration file, or the system Makefile segments.
   
    "make" targets     "make" targets
      These default targets may be built by running make(1) in any subtree of       These default targets may be built by running make(1) in any subtree of
      the NetBSD source code.  It is recommended that none of these be used       the NetBSD source code.  It is recommended that none of these be used
      from the top level Makefile; as a specific exception, ``make obj'' and       from the top level Makefile; as a specific exception, "make obj" and
      ``make cleandir'' are useful in that context.       "make cleandir" are useful in that context.
   
      all        Build programs, libraries, and preformatted documentation.       all        Build programs, libraries, and preformatted documentation.
   
      clean      Remove program and library object code files.       clean      Remove program and library object code files.
   
      cleandir   Same as clean, but also remove preformatted documentation, de-       cleandir   Same as clean, but also remove preformatted documentation,
                 pendency files generated by ``make depend'', and any other                  dependency files generated by "make depend", and any other
                 files known to be created at build time.  ``make distclean''                  files known to be created at build time.
                 may be used as a synonym, for familiarity with a similar well-  
                 known convention.  
   
      depend     Create dependency files (.depend) containing more detailed in-       depend     Create dependency files (.depend) containing more detailed
                 formation about the dependencies of source code on header                  information about the dependencies of source code on header
                 files.  Allows programs to be recompiled automatically when a                  files.  Allows programs to be recompiled automatically when a
                 dependency changes.                  dependency changes.
   
      dependall  Does a ``make depend'' immediately followed by a ``make all''.       dependall  Does a "make depend" immediately followed by a "make all".
                 This improves cache locality of the build since both passes                  This improves cache locality of the build since both passes
                 read the source files in their entirety.                  read the source files in their entirety.
   
      includes   Build and install system header files.  Typically needed be-       distclean  Synonym for cleandir.
                 fore any system libraries or programs can be built.  
        includes   Build and install system header files.  Typically needed
                   before any system libraries or programs can be built.
   
      install    Install programs, libraries, and documentation into DESTDIR.       install    Install programs, libraries, and documentation into DESTDIR.
                 Few files will be installed to /dev, /etc, /root or /var in                  Few files will be installed to DESTDIR/dev, DESTDIR/etc,
                 order to prevent user supplied configuration data from being                  DESTDIR/root or DESTDIR/var in order to prevent user supplied
                 overwritten.                  configuration data from being overwritten.
   
      lint       Run lint(1) against the C source code, where appropriate, and       lint       Run lint(1) against the C source code, where appropriate, and
                 generate system-installed lint libraries.                  generate system-installed lint libraries.
Line 399  BUILDING
Line 605  BUILDING
      Additional make(1) targets are usable specifically from the top source       Additional make(1) targets are usable specifically from the top source
      level to facilitate building the entire NetBSD source tree.       level to facilitate building the entire NetBSD source tree.
   
      build      Build the entire NetBSD system.  This orders portions of the       build         Build the entire NetBSD system (except the kernel).  This
                 source tree such that prerequisites will be built in the prop-                     orders portions of the source tree such that prerequisites
                 er order.                     will be built in the proper order.
   
      release    Do a ``make build'', then package the system into a standard       distribution  Do a "make build", and then install a full distribution
                 release layout as described by release(7).  This requires that                     (which does not include a kernel) into DESTDIR, including
                 RELEASEDIR be set (see above).                     files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and
                      DESTDIR/var.
   
        buildworld    As per "make distribution", except that it ensures that
                      DESTDIR is not the root directory.
   
        installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR,
                      which defaults to the root directory.  Ensures that
                      INSTALLWORLDDIR is not the root directory if cross
                      compiling.
   
                      The INSTALLSETS environment variable may be set to a space-
                      separated list of distribution sets to be installed.  By
                      default, all sets except "etc" and "xetc" are installed, so
                      most files in INSTALLWORLDDIR/etc will not be installed or
                      modified.
   
                      Note: Before performing this operation with
                      INSTALLWORLDDIR=/, it is highly recommended that you
                      upgrade your kernel and reboot.  After performing this
                      operation, it is recommended that you use etcupdate(8) to
                      update files in INSTALLWORLDDIR/etc, and postinstall(8) to
                      check for or fix inconsistencies.
   
        sets          Create distribution sets from DESTDIR into
                      RELEASEDIR/RELEASEMACHINEDIR/binary/sets.  Should be run
                      after "make distribution", as "make build" alone does not
                      install all of the required files.
   
        sourcesets    Create source sets of the source tree into
                      RELEASEDIR/source/sets.
   
        syspkgs       Create syspkgs from DESTDIR into
                      RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs.  Should be run
                      after "make distribution", as "make build" alone does not
                      install all of the required files.
   
        release       Do a "make distribution", build kernels, distribution
                      media, and install sets (this as per "make sets"), and then
                      package the system into a standard release layout as
                      described by release(7).  This requires that RELEASEDIR be
                      set (see above).
   
        iso-image     Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/images directory.  The CD-ROM file system will
                      have a layout as described in release(7).
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based
                      installation program, which can be used to install or
                      upgrade a NetBSD system.  Bootable CD-ROMs also contain
                      tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                      Before "make iso-image" is attempted, RELEASEDIR must be
                      populated by "make release" or equivalent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom
                      directory by "make release".  These smaller images usually
                      contain the same tools as the larger images in
                      RELEASEDIR/images, but do not contain additional content
                      such as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1)
                      utility, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
        iso-image-source
                      Create a NetBSD installation CD-ROM image in the
                      RELEASEDIR/images directory.  The CD-ROM file system will
                      have a layout as described in release(7).  It will have top
                      level directories for the machine type and source.
   
                      For most machine types, the CD-ROM will be bootable, and
                      will automatically run the sysinst(8) menu-based
                      installation program, which can be used to install or
                      upgrade a NetBSD system.  Bootable CD-ROMs also contain
                      tools that may be useful in repairing a damaged NetBSD
                      installation.
   
                      Before "make iso-image-source" is attempted, RELEASEDIR
                      must be populated by "make sourcesets release" or
                      equivalent.
   
                      Note that other, smaller, CD-ROM images may be created in
                      the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom
                      directory by "make release".  These smaller images usually
                      contain the same tools as the larger images in
                      RELEASEDIR/images, but do not contain additional content
                      such as the distribution sets.
   
                      Note that the mac68k port still uses an older method of
                      creating CD-ROM images.  This requires the mkisofs(1)
                      utility, which is not part of NetBSD, but which can be
                      installed from pkgsrc/sysutils/cdrtools.
   
        install-image
                      Create a bootable NetBSD installation disk image in the
                      RELEASEDIR/images directory.  The installation disk image
                      is suitable for copying to bootable USB flash memory
                      sticks, etc., for machines which are able to boot from such
                      devices.  The file system in the bootable disk image will
                      have a layout as described in release(7).
   
                      The installation image is bootable, and will automatically
                      run the sysinst(8) menu-based installation program, which
                      can be used to install or upgrade a NetBSD system.  The
                      image also contains tools that may be useful in repairing a
                      damaged NetBSD installation.
   
                      Before "make install-image" is attempted, RELEASEDIR must
                      be populated by "make release" or equivalent.  The build
                      must have been performed with MKUNPRIVED=yes because "make
                      install-image" relies on information in DESTDIR/METALOG.
   
        live-image    Create NetBSD live images in the RELEASEDIR/images
                      directory.  The live image contains all necessary files to
                      boot NetBSD up to multi-user mode, including all files
                      which should be extracted during installation, NetBSD
                      disklabel, bootloaders, etc.
   
                      The live image is suitable for use as a disk image in
                      virtual machine environments such as QEMU, and also useful
                      to boot NetBSD from a USB flash memory stick on a real
                      machine, without the need for installation.
   
                      Before "make live-image" is attempted, RELEASEDIR must be
                      populated by "make release" or equivalent.  The build must
                      have been performed with MKUNPRIVED=yes because "make
                      install-image" relies on information in DESTDIR/METALOG.
   
      regression-tests       regression-tests
                 Can only be run after building the regression tests in the di-                     Can only be run after building the regression tests in the
                 rectory ``regress''.  Runs the compiled regression tests on                     directory "regress".  Runs those compiled regression tests
                 the local host.                     on the local host.  Note that most tests are now managed
                      instead using atf(7); this target should probably run those
                      as well but currently does not.
   
    The "build.sh" script     The "build.sh" script
      This script file is a Bourne shell script designed to build the entire       This script file is a shell script designed to build the entire NetBSD
      NetBSD system on any host with a Bourne shell in /bin/sh, including many       system on any host with a suitable modern shell and some common
      that are not POSIX compliant.  Note that if a host system's /bin/sh is       utilities.  The required shell features are described under the HOST_SH
      unusually old and broken, the Korn Shell (/bin/ksh), if available, may be       variable.
      a usable alternative.  
        If a host system's default shell does support the required features, then
        we suggest that you explicitly specify a suitable shell using a command
        like
   
              /path/to/suitable/shell build.sh [options]
   
        The above command will usually enable build.sh to automatically set
        HOST_SH=/path/to/suitable/shell, but if that fails, then the following
        set of commands may be used instead:
   
              HOST_SH=/path/to/suitable/shell
              export HOST_SH
              ${HOST_SH} build.sh [options]
   
        If build.sh detects that it is being executed under an unsuitable shell,
        it attempts to exec a suitable shell instead, or prints an error message.
        If HOST_SH is not set explicitly, then build.sh sets a default using
        heuristics dependent on the host platform, or from the shell under which
        build.sh is executed (if that can be determined), or using the first copy
        of sh found in PATH.
   
      All cross-compile builds, and most native builds, of the entire system       All cross-compile builds, and most native builds, of the entire system
      should make use of build.sh rather than just running ``make''.  This way,       should make use of build.sh rather than just running "make".  This way,
      the make(1) program will be bootstrapped properly, in case the host sys-       the make(1) program will be bootstrapped properly, in case the host
      tem has an older or incompatible ``make'' program.       system has an older or incompatible "make" program.
   
      When compiling the entire system via build.sh, many make(1) variables are       When compiling the entire system via build.sh, many make(1) variables are
      set for you in order to help encapsulate the build process.  In the list       set for you in order to help encapsulate the build process.  In the list
      of options below, variables that are automatically set by build.sh are       of options below, variables that are automatically set by build.sh are
      noted where applicable.       noted where applicable.
   
      The following are available command line options that may be supplied to       The following operations are supported by build.sh:
      build.sh:  
        build         Build the system as per "make build".  Before the main part
                      of the build commences, this command runs the obj operation
                      (unless the -o option is given), "make cleandir" (unless
                      the -u option is given), and the tools operation.
   
        distribution  Build a full distribution as per "make distribution".  This
                      command first runs the build operation.
   
        release       Build a full release as per "make release".  This command
                      first runs the distribution operation.
   
        makewrapper   Create the nbmake-MACHINE wrapper.  This operation is
                      automatically performed for any of the other operations.
   
        cleandir      Perform "make cleandir".
   
        obj           Perform "make obj".
   
        tools         Build and install the host tools from src/tools.  This
                      command will first run "make obj" and "make cleandir" in
                      the tools subdirectory unless the -o or -u options
                      (respectively) are given.
   
        install=idir  Install the contents of DESTDIR to idir, using "make
                      installworld".  Note that files that are part of the "etc"
                      or "xetc" sets will not be installed, unless overridden by
                      the INSTALLSETS environment variable.
   
        kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                      configuration file suitable for use by config(1).  If kconf
                      does not contain any `/' characters, the configuration file
                      is expected to be found in the KERNCONFDIR directory, which
                      is typically sys/arch/MACHINE/conf.  The new kernel will be
                      built in a subdirectory of KERNOBJDIR, which is typically
                      sys/arch/MACHINE/compile or an associated object directory.
   
                      This command does not imply the tools command; run the
                      tools command first unless it is certain that the tools
                      already exist and are up to date.
   
                      This command will run "make cleandir" on the kernel in
                      question first unless the -u option is given.
   
        kernel.gdb=kconf
                      Build a new kernel with debug information.  Similar to the
                      above kernel=kconf operation, but creates a netbsd.gdb file
                      alongside of the kernel netbsd, which contains a full
                      symbol table and can be used for debugging (for example
                      with a cross-gdb built by MKCROSSGDB).
   
        kernels       This command will build all kernels defined in port
                      specific release build procedure.
   
                      This command internally calls the kernel=kconf operation
                      for each found kernel configuration file.
   
        modules       This command will build kernel modules and install them
                      into DESTDIR.
   
        releasekernel=kconf
                      Install a gzip(1)ed copy of the kernel previously built by
                      kernel=kconf into
                      RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as
                      netbsd-kconf.gz, although the "netbsd" prefix is determined
                      from the "config" directives in kconf.
   
        sets          Perform "make sets".
   
      -a arch   Set the value of MACHINE_ARCH to arch.       sourcesets    Perform "make sourcesets".
   
        syspkgs       Perform "make syspkgs".
   
        iso-image     Perform "make iso-image".
   
        iso-image-source
                      Perform "make iso-image-source".
   
        install-image
                      Perform "make install-image".
   
        live-image    Perform "make live-image".
   
        list-arch     Prints a list of valid MACHINE and MACHINE_ARCH settings,
                      the default MACHINE_ARCH for each MACHINE, and aliases for
                      MACHINE/MACHINE_ARCH pairs, and then exits.  The -m or -a
                      options (or both) may be used to specify glob patterns that
                      will be used to narrow the list of results; for example,
                      "build.sh -m 'evm*' -a '*arm*' list-arch" will list all
                      known MACHINE/MACHINE_ARCH values in which either MACHINE
                      or ALIAS matches the pattern `evb*', and MACHINE_ARCH
                      matches the pattern `*arm*'.
   
        The following command line options alter the behaviour of the build.sh
        operations described above:
   
        -a arch   Set the value of MACHINE_ARCH to arch.  See the -m option for
                  more information.
   
      -B buildid       -B buildid
                Set the value of BUILDID to buildid.  This will also append the                 Set the value of BUILDID to buildid.  This will also append the
                build idenfitier to the name of the ``make'' wrapper script so                 build identifier to the name of the "make" wrapper script so
                that the resulting name is of the form ``nbmake-MACHINE-                 that the resulting name is of the form
                BUILDID''.                 "nbmake-MACHINE-BUILDID".
   
      -b        Bootstrap ``make'' and create a nbmake-MACHINE script (see be-       -C cdextras
                low).                 Append cdextras to the CDEXTRA variable, which is a space-
                  separated list of files or directories that will be added to
      -d        Build a full distribution.  This differs from a default build                 the CD-ROM image that may be create by the "iso-image" or
                in that files will also be installed to /dev, /etc, /root and                 "iso-image-source" operations.  Files will be added to the root
                /var.  Note this does not build a ``release''; no release sets                 of the CD-ROM image, whereas directories will be copied
                are placed in ${RELEASEDIR}.  -d is implied by -R.                 recursively.  If relative paths are specified, they will be
                  converted to absolute paths before being used.  Multiple paths
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have                 may be specified via multiple -C options, or via a single
                explicit dependancies as necessary to enforce build ordering.                 option whose argument contains multiple space-separated paths.
                If you see build failures with -j, please save complete build  
                logs so the failures can be analyzed.       -D dest   Set the value of DESTDIR to dest.  If a relative path is
                  specified, it will be converted to an absolute path before
      -k kernel                 being used.
                Build a new kernel.  The kernel argument is the name of a con-  
                figuration file suitable for use by config(8).  If kernel does       -E        Set `expert' mode.  This overrides various sanity checks, and
                not contain any `/' characters, the configuration file is ex-                 allows: DESTDIR does not have to be set to a non-root path for
                pected to be found in the KERNCONFDIR directory, which is typi-                 builds, and MKUNPRIVED=yes does not have to be set when
                cally sys/arch/MACHINE/conf.  The new kernel will be built in a                 building as a non-root user.
                subdirectory of KERNOBJDIR, which is typically  
                sys/arch/MACHINE/compile or an associated object directory.  In                 Note: It is highly recommended that you know what you are doing
                order to ensure that the kernel is built using up-to-date                 when you use this option.
                tools, it is strongly recommended that the tools be rebuilt  
                (using the -t option) in a separate invocation of build.sh pri-       -h        Print a help message.
                or to using the -k option, or that the -t and -k options be  
                used together in a single invocation of build.sh.       -j njob   Run up to njob make(1) subjobs in parallel; passed through to
                  make(1).  If you see failures for reasons other than running
      -m mach   Set the value of MACHINE to mach.  This will also override any                 out of memory while using build.sh with -j, please save
                value of MACHINE_ARCH in the process environment with a value                 complete build logs so the failures can be analyzed.
                deduced from mach, unless -a is specified.  All cross builds  
                require -m, but if unset on a NetBSD host, the host's value of                 To achieve the fastest builds, -j values between (1 + the
                MACHINE will be detected and used automatically.                 number of CPUs) and (2 * the number of CPUs) are recommended.
                  Use lower values on machines with limited memory or I/O
                  bandwidth.
   
        -M obj    Set MAKEOBJDIRPREFIX to obj.  Unsets MAKEOBJDIR.  See "-O obj"
                  for more information.
   
                  For instance, if the source directory is /usr/src, a setting of
                  "-M /usr/obj" will place build-time files under
                  /usr/obj/usr/src/bin, /usr/obj/usr/src/lib,
                  /usr/obj/usr/src/usr.bin, and so forth.
   
                  If a relative path is specified, it will be converted to an
                  absolute path before being used.  build.sh imposes the
                  restriction that the argument to the -M option must not begin
                  with a "$" (dollar sign) character; otherwise it would be too
                  difficult to determine whether the value is an absolute or a
                  relative path.  If the directory does not already exist,
                  build.sh will create it.
   
        -m mach   Set the value of MACHINE to mach, unless the mach argument is
                  an alias that refers to a MACHINE/MACHINE_ARCH pair, in which
                  case both MACHINE and MACHINE_ARCH are set from the alias.
                  Such aliases are interpreted entirely by build.sh; they are not
                  used by any other part of the build system.  The MACHINE_ARCH
                  setting implied by mach will override any value of MACHINE_ARCH
                  in the process environment, but will not override a value set
                  by the -a option.  All cross builds require -m, but if unset on
                  a NetBSD host, the host's value of MACHINE will be detected and
                  used automatically.
   
                  See the list-arch operation for a way to get a list of valid
                  MACHINE and MACHINE_ARCH settings.
   
        -N noiselevel
                  Set the "noisyness" level of the build, by setting MAKEVERBOSE
                  to noiselevel.
   
      -n        Show the commands that would be executed by build.sh, but do       -n        Show the commands that would be executed by build.sh, but do
                not make any changes.  This is similar in concept to ``make                 not make any changes.  This is similar in concept to "make -n".
                -n''.  
        -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                  place the built object files under obj.  Unsets
                  MAKEOBJDIRPREFIX.
   
      -o        Set the value of MKOBJDIRS to ``no''.                 For instance, a setting of "-O /usr/obj" will place build-time
                  files under /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and
                  so forth.
   
                  If a relative path is specified, it will be converted to an
                  absolute path before being used.  build.sh imposes the
                  restriction that the argument to the -O option must not contain
                  a "$" (dollar sign) character.  If the directory does not
                  already exist, build.sh will create it.
   
                  In normal use, exactly one of the -M or -O options should be
                  specified.  If neither -M nor -O is specified, then a default
                  object directory will be chosen according to rules in
                  <bsd.obj.mk>.  Relying on this default is not recommended
                  because it is determined by complex rules that are influenced
                  by the values of several variables and by the location of the
                  source directory.
   
                  Note that placing the obj directory location outside of the
                  default source tree hierarchy makes it easier to manually clear
                  out old files in the event the "make cleandir" operation is
                  unable to do so.  (See CAVEATS below.)
   
                  Note also that use of one of -M or -O is the only means of
                  building multiple machine architecture userlands from the same
                  source tree without cleaning between builds (in which case, one
                  would specify distinct obj locations for each).
   
        -o        Set the value of MKOBJDIRS to "no".  Otherwise, it will be
                  automatically set to "yes".  This default is opposite to the
                  behaviour when not using build.sh.
   
        -R rel    Set the value of RELEASEDIR to rel.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.
   
      -r        Remove the contents of DESTDIR and TOOLDIR before building       -r        Remove the contents of DESTDIR and TOOLDIR before building
                (provides a clean starting point).  This will skip deleting                 (provides a clean starting point).  This will skip deleting
                DESTDIR if building on a native system to the root directory.                 DESTDIR if building on a native system to the root directory.
   
      -t        Build and install the host tools from src/tools only.  This op-       -S seed   Change the value of BUILDSEED to seed.  This should rarely be
                tion implies -b.                 necessary.
   
      -u        Set the UPDATE variable.       -T tools  Set the value of TOOLDIR to tools.  If a relative path is
                  specified, it will be converted to an absolute path before
                  being used.  If set, the bootstrap "make" will only be rebuilt
                  if the source files for make(1) have changed.
   
      -w wrapper       -U        Set MKUNPRIVED=yes.
                Create the nbmake wrapper script (see below) in a custom loca-  
                tion, specified by wrapper.  This allows, for instance, to  
                place the wrapper in PATH automatically.  Note that wrapper is  
                the full name of the file, not just a directory name.  
   
      -D dest   Set the value of DESTDIR to dest.       -u        Set MKUPDATE=yes.
   
      -M obj    Set MAKEOBJDIRPREFIX to obj.       -V var=[value]
                  Set the environment variable var to an optional value.  This is
                  propagated to the nbmake wrapper.
   
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will       -w wrapper
                place the built object files under obj.  For instance, a set-                 Create the nbmake wrapper script (see below) in a custom
                ting of /usr/obj will place build-time files under                 location, specified by wrapper.  This allows, for instance, to
                /usr/obj/bin, /usr/obj/lib, and so forth.                 place the wrapper in PATH automatically.  Note that wrapper is
                  the full name of the file, not just a directory name.  If a
      -R rel    Set the value of RELEASEDIR to rel.  Setting this option will                 relative path is specified, it will be converted to an absolute
                cause build.sh to run ``make release'' instead of ``make                 path before being used.
                build''.  
        -X x11src
      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap                 Set the value of X11SRCDIR to x11src.  If a relative path is
                ``make'' will only be rebuilt as needed (when the source files                 specified, it will be converted to an absolute path before
                for make(1) change).                 being used.
   
        -x        Set MKX11=yes.
   
        -Y extsrcdir
                  Set the value of EXTSRCSRCDIR to extsrcdir.  If a relative path
                  is specified, it will be converted to an absolute path before
                  being used.
   
      -U        Set the UNPRIVED variable.       -y        Set MKEXTSRC=yes.
   
        -Z var    Unset ("zap") the environment variable var.  This is propagated
                  to the nbmake wrapper.
   
    The "nbmake-MACHINE" wrapper script     The "nbmake-MACHINE" wrapper script
      If using the build.sh script to build NetBSD, a nbmake-MACHINE script       If using the build.sh script to build NetBSD, a nbmake-MACHINE script
Line 519  BUILDING
Line 1057  BUILDING
      subtrees on a cross-compile host.       subtrees on a cross-compile host.
   
      nbmake-MACHINE can be invoked in lieu of make(1), and will instead call       nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
      the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-       the up-to-date version of "nbmake" installed into TOOLDIR/bin with
      eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.       several key variables pre-set, including MACHINE, MACHINE_ARCH, and
        TOOLDIR.  nbmake-MACHINE will also set variables specified with -V, and
        unset variables specified with -Z.
   
      This script can be symlinked into a directory listed in PATH, or called       This script can be symlinked into a directory listed in PATH, or called
      with an absolute path.       with an absolute path.
   
 EXAMPLES  EXAMPLES
      ./build.sh -t       1.   % ./build.sh [options] tools kernel=GENERIC
                Build a new toolchain.  
             Build a new toolchain, and use the new toolchain to configure and
             build a new GENERIC kernel.
   
        2.   % ./build.sh [options] -U distribution
   
             Using unprivileged mode, build a complete distribution to a DESTDIR
             directory that build.sh selects (and will display).
   
        3.   # ./build.sh [options] -U install=/
   
             As root, install to / the distribution that was built by example 2.
             Even though this is run as root, -U is required so that the
             permissions stored in DESTDIR/METALOG are correctly applied to the
             files as they're copied to /.
   
        4.   % ./build.sh [options] -U -u release
   
      cd ${KERNCONFDIR} ; ${TOOLDIR}/bin/nbconfig GENERIC            Using unprivileged mode, build a complete release to DESTDIR and
                Use the new version of config(8) to prepare to build a new            RELEASEDIR directories that build.sh selects (and will display).
                GENERIC kernel.            MKUPDATE=yes (-u) is set to prevent the "make cleandir", so that if
             this is run after example 2, it doesn't need to redo that portion of
      cd ${KERNOBJDIR}/GENERIC ; ${TOOLDIR}/bin/nbmake-${MACHINE} dependall            the release build.
                Use the new toolchain to build a new GENERIC kernel.  
   
      ./build.sh -t -k GENERIC  
                Build a new toolchain, and use the new toolchain to configure  
                and build a new GENERIC kernel.  
   
      ./build.sh -U -d  
                Using unprivileged mode, build a complete distribution in  
                DESTDIR.  
   
      ./build.sh -U -R /some/dir/RELEASE  
                Using unprivileged mode, build a complete release in the speci-  
                fied release directory.  
   
 OBSOLETE VARIABLES  OBSOLETE VARIABLES
      NBUILDJOBS  Use the make(1) option -j, instead.       NBUILDJOBS  Use the make(1) option -j instead.
   
      USE_NEW_TOOLCHAIN       USE_NEW_TOOLCHAIN
                  The new toolchain is now the default.  To disable, use                   The new toolchain is now the default.  To disable, use
                  TOOLCHAIN_MISSING=yes.                   TOOLCHAIN_MISSING=yes.
   
 SEE ALSO  SEE ALSO
      make(1), hier(7), release(7)       make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),
        pkgsrc/sysutils/cdrtools
   
 HISTORY  HISTORY
      The build.sh based build scheme was introduced for NetBSD 1.6 as       The build.sh based build scheme was introduced for NetBSD 1.6 as
      USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.       USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
   
 BUGS  CAVEATS
      A few platforms are not yet using this build system.       After significant updates to third-party components in the source tree,
        the "make cleandir" operation may be insufficient to clean out old files
        in object directories.  Instead, one may have to manually remove the
        files.  Consult the UPDATING file for notices concerning this.
   
 NetBSD                         October 21, 2002                              9  NetBSD                         October 21, 2017                         NetBSD

Legend:
Removed from v.1.16  
changed lines
  Added in v.1.130

CVSweb <webmaster@jp.NetBSD.org>