[BACK]Return to BUILDING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/BUILDING between version 1.12 and 1.39

version 1.12, 2002/05/13 01:44:34 version 1.39, 2003/07/18 16:30:49
Line 13  STATUS
Line 13  STATUS
      plementation are noted specially, as with the note below:       plementation are noted specially, as with the note below:
   
      Note: This document applies only to platforms which use the new toolchain       Note: This document applies only to platforms which use the new toolchain
      as indicated by the default setting of USE_NEW_TOOLCHAIN in <bsd.own.mk>.       as indicated by the default setting of TOOLCHAIN_MISSING in <bsd.own.mk>.
      Platforms which have not yet been switched to the new toolchain should       Platforms which have not yet been switched to the new toolchain should
      continue building traditionally, using the notes specified in the file       continue building traditionally, using the notes specified in the file
      UPDATING.       UPDATING.
Line 30  REQUIREMENTS
Line 30  REQUIREMENTS
      toolchain (make is not required); all other tools are created as part of       toolchain (make is not required); all other tools are created as part of
      the NetBSD build process.       the NetBSD build process.
   
            Note: A couple host toolchain components are not yet available in             Note: A couple of host toolchain components are not yet available
            the tools directory.  Also, some tools use non-POSIX, non-ANSI C             in the tools directory.  Also, some tools use non-POSIX, non-ANSI C
            extensions and need to be standardized.  As a result, cross-compil-             extensions and need to be standardized.  As a result, cross-compil-
            ing from systems other than NetBSD is not currently supported.             ing from systems other than NetBSD is not currently supported.
   
 FILES  FILES
    Source tree layout     Source tree layout
        doc/BUILDING.mdoc
      BUILDING.mdoc  This document (in -mdoc troff format; the original copy).                      This document (in -mdoc troff format; the original copy).
   
      BUILDING       This document (in plaintext).       BUILDING       This document (in plaintext).
   
Line 66  FILES
Line 66  FILES
   
      distrib/, etc/       distrib/, etc/
                     Sources for items used when making a full release snap-                      Sources for items used when making a full release snap-
                     shot, such as files installed in /etc on the destination                      shot, such as files installed in DESTDIR/etc on the desti-
                     system, boot media, and release notes.                      nation system, boot media, and release notes.
   
      regress/       Regression test harness.  Can be cross-compiled, but only       regress/       Regression test harness.  Can be cross-compiled, but only
                     run natively.                      run natively.
Line 101  CONFIGURATION
Line 101  CONFIGURATION
   
      MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-       MAKEOBJDIR        Directory to use as the .OBJDIR for the current direc-
                        tory.  Used only if MAKEOBJDIRPREFIX is not defined.                         tory.  Used only if MAKEOBJDIRPREFIX is not defined.
                        MAKEOBJDIR can only be provided in the environment.                         MAKEOBJDIR can only be provided in the environment or
                          via the -M flag of build.sh.
   
      MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If       MAKEOBJDIRPREFIX  Top level directory of the object directory tree.  If
                        this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used                         this is defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used
                        as the .OBJDIR for the current directory.  The current                         as the .OBJDIR for the current directory.  The current
                        directory may be read only.  MAKEOBJDIRPREFIX can only                         directory may be read only.  MAKEOBJDIRPREFIX can only
                        be provided in the environment.                         be provided in the environment or via the -M flag of
                          build.sh.
   
    "make" variables     "make" variables
      Several variables control the behavior of NetBSD builds.  Unless other-       Several variables control the behavior of NetBSD builds.  Unless other-
Line 131  CONFIGURATION
Line 133  CONFIGURATION
                  Default: Empty string if USETOOLS is ``yes''; unset other-                   Default: Empty string if USETOOLS is ``yes''; unset other-
                  wise.                   wise.
   
                    Note: build.sh will provide a default of destdir.MACHINE (in
                    the top-level .OBJDIR) unless run in `expert' mode
   
      MAKECONF    The name of the make(1) configuration file.  Only settable in       MAKECONF    The name of the make(1) configuration file.  Only settable in
                  the process environment.                   the process environment.
   
Line 150  CONFIGURATION
Line 155  CONFIGURATION
                  Default: ``yes''                   Default: ``yes''
   
      MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system       MKDOC       Can be set to ``yes'' or ``no''.  Indicates whether system
                  documentation destined for /usr/share/doc will be installed                   documentation destined for DESTDIR/usr/share/doc will be in-
                  during a build.                   stalled during a build.
   
                  Default: ``yes''                   Default: ``yes''
   
Line 175  CONFIGURATION
Line 180  CONFIGURATION
      MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)       MKLINT      Can be set to ``yes'' or ``no''.  Indicates whether lint(1)
                  will be run against portions of the NetBSD source code during                   will be run against portions of the NetBSD source code during
                  the build, and whether lint libraries will be installed into                   the build, and whether lint libraries will be installed into
                  /usr/libdata/lint.                   DESTDIR/usr/libdata/lint.
   
                  Default: ``yes''                   Default: ``yes''
   
Line 221  CONFIGURATION
Line 226  CONFIGURATION
                  code.                   code.
   
      MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files       MKSHARE     Can be set to ``yes'' or ``no''.  Indicates whether files
                  destined to reside in /usr/share will be built and installed                   destined to reside in DESTDIR/usr/share will be built and in-
                  during a build.  If set to ``no'', then all of MKCATPAGES,                   stalled during a build.  If set to ``no'', then all of
                  MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon-                   MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to
                  ditionally.                   ``no'' unconditionally.
   
                  Default: ``yes''                   Default: ``yes''
   
        MKUNPRIVED  Can be set to ``yes'' or ``no''.  Indicates whether an un-
                    privileged install will occur.  The user, group, permissions,
                    and file flags, will not be set on the installed item; in-
                    stead the information will be appended to a file called
                    METALOG in DESTDIR.  The contents of METALOG is used during
                    the generation of the distribution tar files to ensure that
                    the appropriate file ownership is stored.
   
                    Default: ``no''
   
        MKUPDATE    Can be set to ``yes'' or ``no''.  Indicates whether all in-
                    stall operations intended to write to DESTDIR will compare
                    file timestamps before installing, and skip the install phase
                    if the destination files are up-to-date.  This also has im-
                    plications on full builds (see next subsection).
   
                    Default: ``no''
   
      TOOLDIR     Directory to hold the host tools, once built.  This directory       TOOLDIR     Directory to hold the host tools, once built.  This directory
                  should be unique to a given host system and NetBSD source                   should be unique to a given host system and NetBSD source
                  tree.  (However, multiple targets may share the same TOOLDIR;                   tree.  (However, multiple targets may share the same TOOLDIR;
                  the target-dependent files have unique names.)  If unset, a                   the target-dependent files have unique names.)  If unset, a
                  default based on the uname(1) information of the host plat-                   default based on the uname(1) information of the host plat-
                  form will be created in the .OBJDIR of src/tools.                   form will be created in the .OBJDIR of src.
   
                  Default: Unset.  
   
      UNPRIVED    If set, then an unprivileged install will occur.  The user,  
                  group, permissions, and file flags, will not be set on the  
                  installed item; instead the information will be appended to a  
                  file called METALOG in DESTDIR.  The contents of METALOG is  
                  used during the generation of the distribution tar files to  
                  ensure that the appropriate file ownership is stored.  
   
                  Default: Unset.  
   
      UPDATE      If set, then all install operations intended to write to  
                  DESTDIR will compare file timestamps before installing, and  
                  skip the install phase if the destination files are up-to-  
                  date.  This also has implications on full builds (see next  
                  subsection).  
   
                  Default: Unset.                   Default: Unset.
   
Line 281  CONFIGURATION
Line 287  CONFIGURATION
      These variables only affect the top level ``Makefile'' and do not affect       These variables only affect the top level ``Makefile'' and do not affect
      manually building subtrees of the NetBSD source code.       manually building subtrees of the NetBSD source code.
   
      MKOBJDIRS      Can be set to ``yes'' or ``no''.  Indicates whether object       INSTALLWORLDDIR  Location for the ``make installworld'' target to install
                     directories will be created automatically (via a ``make                        to.
                     obj'' pass) at the start of a build.  
                         Default: ``/''
   
        MKOBJDIRS        Can be set to ``yes'' or ``no''.  Indicates whether ob-
                         ject directories will be created automatically (via a
                         ``make obj'' pass) at the start of a build.
   
                     Default: ``yes''                        Default: ``no''
   
      NBUILDJOBS     Now obsolete.  Use the make(1) option -j, instead (see be-       MKUPDATE         Can be set to ``yes'' or ``no''.  If set, then in addi-
                     low)                        tion to the effects described for MKUPDATE=yes above,
                         this implies the effects of NOCLEANDIR (i.e., ``make
                         cleandir'' is avoided).
   
                     Default: Unset.                        Default: ``no''
   
      NOCLEANDIR     If set, avoids the ``make cleandir'' phase of a full       NBUILDJOBS       Now obsolete.  Use the make(1) option -j, instead (see
                     build.  This has the effect of allowing only changed files                        below)
                     in a source tree to be recompiled.  This can speed up  
                     builds when updating only a few files in the tree.  
   
                     Default: Unset.                        Default: Unset.
   
      NODISTRIBDIRS  If set, avoids the ``make distrib-dirs'' phase of a full       NOCLEANDIR       If set, avoids the ``make cleandir'' phase of a full
                     build.  This skips running mtree(8) on DESTDIR, useful on                        build.  This has the effect of allowing only changed
                     systems where building as an unprivileged user, or where                        files in a source tree to be recompiled.  This can speed
                     it is known that the system-wide mtree files have not                        up builds when updating only a few files in the tree.
                     changed.  
   
                     Default: Unset.                        Default: Unset.
   
      NOINCLUDES     If set, avoids the ``make includes'' phase of a full       NODISTRIBDIRS    If set, avoids the ``make distrib-dirs'' phase of a full
                     build.  This has the effect of preventing make(1) from                        build.  This skips running mtree(8) on DESTDIR, useful
                     thinking that some programs are out-of-date simply because                        on systems where building as an unprivileged user, or
                     the system include files have changed.  However, this op-                        where it is known that the system-wide mtree files have
                     tion should not be used when updating the entire NetBSD                        not changed.
                     source tree arbitrarily; it is suggested to use UPDATE in  
                     that case.  
   
                     Default: Unset.                        Default: Unset.
   
      RELEASEDIR     If set, specifies the directory to which a release(7) lay-       NOINCLUDES       If set, avoids the ``make includes'' phase of a full
                     out will be written at the end of a ``make release''.                        build.  This has the effect of preventing make(1) from
                         thinking that some programs are out-of-date simply be-
                         cause the system include files have changed.  However,
                         this option should not be used when updating the entire
                         NetBSD source tree arbitrarily; it is suggested to use
                         MKUPDATE=yes in that case.
   
                     Default: Unset.                        Default: Unset.
   
      UPDATE         If set, then in addition to the effects described for UP-       RELEASEDIR       If set, specifies the directory to which a release(7)
                     DATE above, this implies the effects of NOCLEANDIR.                        layout will be written at the end of a ``make release''.
   
                         Default: Unset.
   
                         Note: build.sh will provide a default of releasedir (in
                         the top-level .OBJDIR) unless run in `expert' mode
   
 BUILDING  BUILDING
    "make" command line options     "make" command line options
Line 382  BUILDING
Line 400  BUILDING
                 fore any system libraries or programs can be built.                  fore any system libraries or programs can be built.
   
      install    Install programs, libraries, and documentation into DESTDIR.       install    Install programs, libraries, and documentation into DESTDIR.
                   Few files will be installed to DESTDIR/dev, DESTDIR/etc,
                   DESTDIR/root or DESTDIR/var in order to prevent user supplied
                   configuration data from being overwritten.
   
      lint       Run lint(1) against the C source code, where appropriate, and       lint       Run lint(1) against the C source code, where appropriate, and
                 generate system-installed lint libraries.                  generate system-installed lint libraries.
Line 396  BUILDING
Line 417  BUILDING
      Additional make(1) targets are usable specifically from the top source       Additional make(1) targets are usable specifically from the top source
      level to facilitate building the entire NetBSD source tree.       level to facilitate building the entire NetBSD source tree.
   
      build      Build the entire NetBSD system.  This orders portions of the       build         Build the entire NetBSD system.  This orders portions of
                 source tree such that prerequisites will be built in the prop-                     the source tree such that prerequisites will be built in
                 er order.                     the proper order.
   
      release    Do a ``make build'', then package the system into a standard       distribution  Do a ``make build'', and then install a full distribution
                 release layout as described by release(7).  This requires that                     into DESTDIR, including files in DESTDIR/dev, DESTDIR/etc,
                 RELEASEDIR be set (see above).                     DESTDIR/root and DESTDIR/var.
   
        buildworld    As per ``make distribution'', except that it ensures that
                      DESTDIR is not the root directory.
   
        installworld  Install the distribution from DESTDIR to INSTALLWORLDDIR
                      (which defaults to the root directory).  Ensures that
                      INSTALLWORLDDIR is the not root directory if cross compil-
                      ing.
   
                      Note: It is highly recommended that you upgrade your kernel
                      and reboot before performing this operation.
   
        sets          Create distribution sets from DESTDIR into
                      RELEASEDIR/MACHINE/binary/sets.  Should be run after ``make
                      distribution'' (as ``make build'' does not install all of
                      the required files).
   
        sourcesets    Create source sets of the source tree into
                      RELEASEDIR/source/sets.
   
        release       Do a ``make distribution'', build kernels, distribution me-
                      dia, and install sets (this as per ``make sets''), and then
                      package the system into a standard release layout as de-
                      scribed by release(7).  This requires that RELEASEDIR be
                      set (see above).
   
      regression-tests       regression-tests
                 Can only be run after building the regression tests in the di-                     Can only be run after building the regression tests in the
                 rectory ``regress''.  Runs the compiled regression tests on                     directory ``regress''.  Runs the compiled regression tests
                 the local host.                     on the local host.
   
    The "build.sh" script     The "build.sh" script
      This script file is a Bourne shell script designed to build the entire       This script file is a Bourne shell script designed to build the entire
Line 426  BUILDING
Line 472  BUILDING
      of options below, variables that are automatically set by build.sh are       of options below, variables that are automatically set by build.sh are
      noted where applicable.       noted where applicable.
   
      The following are available command line options that may be supplied to       The following operations are supported by build.sh:
      build.sh:  
        build         Build the system as per ``make build''.  This option im-
                      plies the obj and tools operations.
   
        distribution  Build a full distribution as per ``make distribution''.
                      This option implies the build operation.
   
        release       Build a full release as per ``make release''.  This option
                      implies the distribution operation.
   
        makewrapper   Create the nbmake-MACHINE wrapper.  This operation is auto-
                      matically performed for any of the other operations.
   
        obj           Perform ``make obj''.
   
        tools         Build and install the host tools from src/tools.
   
        install=idir  Install the contents of DESTDIR to idir, using ``make
                      installworld''.
   
        kernel=kconf  Build a new kernel.  The kconf argument is the name of a
                      configuration file suitable for use by config(8).  If kconf
                      does not contain any `/' characters, the configuration file
                      is expected to be found in the KERNCONFDIR directory, which
                      is typically sys/arch/MACHINE/conf.  The new kernel will be
                      built in a subdirectory of KERNOBJDIR, which is typically
                      sys/arch/MACHINE/compile or an associated object directory.
                      In order to ensure that the kernel is built using up-to-
                      date tools, it is strongly recommended that the tools be
                      rebuilt (using the tools operation).
   
        releasekernel=kconf
                      Install a gzip(1)ed copy of the kernel built by
                      kernel=kconf into RELEASEDIR/MACHINE/binary/kernel, usually
                      as netbsd-kconf.gz, although the ``netbsd'' prefix is de-
                      termined from the ``config'' directives in kconf.
   
        sets          Perform ``make sets''.
   
        sourcesets    Perform ``make sourcesets''.
   
        The following command line options alter the behaviour of the above oper-
        ations: The following command line options alter the behaviour of the
        build.sh operations described above:
   
      -a arch   Set the value of MACHINE_ARCH to arch.       -a arch   Set the value of MACHINE_ARCH to arch.
   
      -B buildid       -B buildid
                Set the value of BUILDID to buildid.  This will also append the                 Set the value of BUILDID to buildid.  This will also append the
                build idenfitier to the name of the ``make'' wrapper script so                 build idenfitier to the name of the ``make'' wrapper script so
                that the resulting name is of the form ``nbmake-MACHINE-                 that the resulting name is of the form
                BUILDID''.                 ``nbmake-MACHINE-BUILDID''.
   
        -D dest   Set the value of DESTDIR to dest.
   
      -b        Bootstrap ``make'' and create a nbmake-MACHINE script (see be-       -E        Set `expert' mode.  This overrides various sanity checks, and
                low).                 allows: DESTDIR does not have to be set to a non-root path for
                  builds, and MKUNPRIVED=yes does not have to be set when build-
                  ing as a non-root user.
   
      -d        Build a full distribution.  This differs from a normal build in                 Note: It is highly recommended that you know what you are doing
                that etc files will also be installed.  Note this does not                 when you use this option.
                build a ``release''; no release sets are placed in ${RE-  
                LEASEDIR}.  
   
      -j njob   Passed through to make(1).  Makefiles should use .WAIT or have       -j njob   Passed through to make(1).  Makefiles should use .WAIT or have
                explicit dependancies as necessary to enforce build ordering.                 explicit dependancies as necessary to enforce build ordering.
                If you see build failures with -j, please save complete build                 If you see build failures with -j, please save complete build
                logs so the failures can be analyzed.                 logs so the failures can be analyzed.
   
        -M obj    Set MAKEOBJDIRPREFIX to obj.
   
      -m mach   Set the value of MACHINE to mach.  This will also override any       -m mach   Set the value of MACHINE to mach.  This will also override any
                value of MACHINE_ARCH in the process environment with a value                 value of MACHINE_ARCH in the process environment with a value
                deduced from mach, unless -a is specified.  All cross builds                 deduced from mach, unless -a is specified, or mach is a special
                require -m, but if unset on a NetBSD host, the host's value of                 case listed below.  All cross builds require -m, but if unset
                MACHINE will be detected and used automatically.                 on a NetBSD host, the host's value of MACHINE will be detected
                  and used automatically.
   
                  Some machines support multiple values for MACHINE_ARCH.  For a
                  given value of mach, the following MACHINE and MACHINE_ARCH
                  values will result:
   
                        mach          MACHINE    MACHINE_ARCH
                        evbmips       evbmips    (not set)
                        evbmips-eb    evbmips    mipseb
                        evbmips-el    evbmips    mipsel
                        evbsh3        evbsh3     (not set)
                        evbsh3-eb     evbsh3     sh3eb
                        evbsh3-el     evbsh3     sh3el
                        sbmips        sbmips     (not set)
                        sbmips-eb     sbmips     mipseb
                        sbmips-el     sbmips     mipsel
   
      -n        Show the commands that would be executed by build.sh, but do       -n        Show the commands that would be executed by build.sh, but do
                not make any changes.  This is similar in concept to ``make                 not make any changes.  This is similar in concept to ``make
                -n''.                 -n''.
   
      -o        Set the value of MKOBJDIRS to ``no''.       -O obj    Create an appropriate transform macro for MAKEOBJDIR that will
                  place the built object files under obj.  For instance, a set-
                  ting of /usr/obj will place build-time files under
                  /usr/obj/bin, /usr/obj/lib, and so forth.
   
        -o        Set the value of MKOBJDIRS to ``no''.  Otherwise, it will be
                  automatically set to ``yes'' (which is opposite to the default
                  behaviour).
   
        -R rel    Set the value of RELEASEDIR to rel.
   
      -r        Remove the contents of DESTDIR and TOOLDIR before building       -r        Remove the contents of DESTDIR and TOOLDIR before building
                (provides a clean starting point).  This will skip deleting                 (provides a clean starting point).  This will skip deleting
                DESTDIR if building on a native system to the root directory.                 DESTDIR if building on a native system to the root directory.
   
      -t        Build and install the host tools from src/tools only.  This op-       -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap
                tion implies -b.                 ``make'' will only be rebuilt as needed (when the source files
                  for make(1) change).
   
      -u        Set the UPDATE variable.       -U        Set MKUNPRIVED=yes.
   
        -u        Set MKUPDATE=yes.
   
        -V var=[value]
                  Set the variable var to value (which is optional).
   
      -w wrapper       -w wrapper
                Create the nbmake wrapper script (see below) in a custom loca-                 Create the nbmake wrapper script (see below) in a custom loca-
Line 477  BUILDING
Line 601  BUILDING
                place the wrapper in PATH automatically.  Note that wrapper is                 place the wrapper in PATH automatically.  Note that wrapper is
                the full name of the file, not just a directory name.                 the full name of the file, not just a directory name.
   
      -D dest   Set the value of DESTDIR to dest.  
   
      -M obj    Set MAKEOBJDIRPREFIX to obj.  
   
      -O obj    Create an appropriate transform macro for MAKEOBJDIR that will  
                place the built object files under obj.  For instance, a set-  
                ting of /usr/obj will place build-time files files under  
                /usr/obj/bin, /usr/obj/lib, and so forth.  
   
      -R rel    Set the value of RELEASEDIR to rel.  Setting this option will  
                cause build.sh to run ``make release'' instead of ``make  
                build''.  
   
      -T tools  Set the value of TOOLDIR to tools.  If set, the bootstrap  
                ``make'' will only be rebuilt as needed (when the source files  
                for make(1) change).  
   
      -U        Set the UNPRIVED variable.  
   
    The "nbmake-MACHINE" wrapper script     The "nbmake-MACHINE" wrapper script
      If using the build.sh script to build NetBSD, a nbmake-MACHINE script       If using the build.sh script to build NetBSD, a nbmake-MACHINE script
      will be created in TOOLDIR/bin upon the first build to assist in building       will be created in TOOLDIR/bin upon the first build to assist in building
Line 507  BUILDING
Line 612  BUILDING
      This script can be symlinked into a directory listed in PATH, or called       This script can be symlinked into a directory listed in PATH, or called
      with an absolute path.       with an absolute path.
   
   EXAMPLES
        1.   ./build.sh tools kernel=GENERIC
   
             Build a new toolchain, and use the new toolchain to configure and
             build a new GENERIC kernel.
   
        2.   ./build.sh -U distribution
   
             Using unprivileged mode, build a complete distribution to a DESTDIR
             directory that build.sh selects (and will display).
   
        3.   # ./build.sh -U install=/
   
             As root, install to / the distribution that was built by example 2.
             Even though this is run as root, -U is required so that the permis-
             sions stored in DESTDIR/METALOG are correctly applied to the files
             as they're copied to /.
   
        4.   ./build.sh -U -u release
   
             Using unprivileged mode, build a complete release to DESTDIR and
             RELEASEDIR directories that build.sh selects (and will display).
             MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that
             if this is run after example 2, it doesn't need to redo that portion
             of the release build.
   
 OBSOLETE VARIABLES  OBSOLETE VARIABLES
      NBUILDJOBS  Now obsolete.  Use the make(1) option -j, instead.       NBUILDJOBS  Use the make(1) option -j, instead.
   
        USE_NEW_TOOLCHAIN
                    The new toolchain is now the default.  To disable, use
                    TOOLCHAIN_MISSING=yes.
   
 SEE ALSO  SEE ALSO
      make(1), hier(7), release(7)       make(1), hier(7), release(7)
   
 HISTORY  HISTORY
      The USE_NEW_TOOLCHAIN based build scheme was introduced in the ``NetBSD-       The build.sh based build scheme was introduced for NetBSD 1.6 as
      current'' development sources between NetBSD 1.5 and NetBSD 1.6.       USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
   
 BUGS  BUGS
      A few platforms are not yet using the USE_NEW_TOOLCHAIN system.       A few platforms are not yet using this build system.
   
 NetBSD                            May 3, 2002                                8  NetBSD                           July 18, 2003                          NetBSD

Legend:
Removed from v.1.12  
changed lines
  Added in v.1.39

CVSweb <webmaster@jp.NetBSD.org>