Up to [cvs.NetBSD.org] / pkgsrc / x11 / xterm
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
x11/xterm: update to 396 Patch #396 - 2024/12/02 fix stricter warnings provided by upcoming gcc 15, as well as NetBSD lint. modify title-stack test script, adding logging and command-replay options. Improved the script with new controls: add XTTITLEPOS query to get position in title-stack. add DECRQSS for XTSMTITLE. correct cursor-addressing limit for VT52 mode (report by Serguei Fichel). amend change in patch #395 for 7-bit parsing to allow UTF-8 titles (report by Dmytro Bagril). portability fixes for configure script, from ncurses update config.guess, config.sub
x11/xterm: update to 395 Patch #395 - 2024/10/24 - add DECRQSS response for DECSTGLT, i.e., ANSI SGR color. - add Russian and SCS NRCS character set mappings. - remove obsolete code for OS390 and VMS. - minor fixes to work with vttest 20240929's 7-bit parsing test. - improve DECRPM responses for unsupported modes; those which are valid for a given DEC terminal are reported as permanently reset rather than unknown. - add JIS-Roman and JIS-Katakana character sets, for VT382. - fix typo in ctlseqs.ms note about function key vs DSR (report by Michael Thomas Greer). - formatting fixes for ctlseqs.ms (report by Mark Manning). - update tables in wcwidth.c based on Unicode 16.0.0
x11/xterm: update to 394 Patch #394 - 2024/09/02 - add -nomap option (request by Tavis Ormandy). - improve checks for rectangle operations, per DEC 070. - improve check for missing characters in bitmap fonts, for a case where the font is marked complete but its range does not include non-Latin1 codes (prompted by discussion with Craig Leres). - correct upper-limit in check for missing characters, from patch #393 changes (report/patch by Matthew Martin). - fix for -report-fonts option when the font's first character position is nonzero (prompted by discussion with Craig Leres). - add null-pointer check for a Heisenbug (Debian #1078255).
x11/xterm: update to 393 Patch #393 - 2024/07/11 - add a check for ANSI SC/RC, to ignore CSI parameters. - improve check for missing characters for bitmap-fonts by using the normal font for reference in the case where the current font, e.g., the wide-font was derived from the normal font and lacks per-character metrics (report by Rajeev V. Pillai). - fix regression in error-recovery for SGR parameters from patch #357 (report by James Holderness). - remove some duplicates in xtermcfg.h (report by Matthew Green). - change default for --enable-imake configure option. - fixes for wcwidth: - return 0 for format effectors, like a zero-width printing character rather than -1 like a control character (report by Rajeev V. Pillai). - correct doublewidth to account for reserved codepoints which are listed in the EastAsianWidth file. - add a special case for surrogate pairs, which might be checked in testing the wcwidth function. - amend sixel bounds-check added in patch #371 to not wrap out-of-bounds data. - eliminate maxStringParse limit for SIXEL. - improve logic which ignores APC, PM and SOS controls to also not accumulate their data temporarily in a buffer. - exclude TERM_INGRESS from cleanup of environment variables (patch by Iain Riley). - fix some documentation typos (report by Thomas Wolff).
x11/xterm: update to 392 Patch #392 - 2024/05/22 - improve input decoding for non-Latin1 character sets by preserving the sense of GL/GR. - add resource preferLatin1 to simplify UPSS configuration (Gentoo #932154). - build-fix for --disable-boxchars; patch #390 reuses that feature's code to draw the part of the DEC Technical character set which has no Unicode equivalent. - modify #include of pty.h to work with musl (report by Khem Raj). - improve definitions used in clock_gettime logic in graphics_sixel.c, as well as updating comments (patch by Ben Wong). - amend allowC1Printable changes from patch #391, restoring a special case which caused C1 characters to be ignored (report/testcase by Dmytro Bagrii). Patch #391 - 2024/05/12 - improve integration between UTF-8 and allowC1Printable. - alter SIXEL HLS computation to make blue 0 degrees (patch by Ben Wong). - disable SIXEL aspect-ratio, pending a rewrite (patch by Ben Wong). - add resource incrementalGraphics (prompted by patch by Ben Wong). - reorganize graphics_sixel.c as a step toward eliminating graphics buffer-size (integrated patch by Ben Wong). - use __linux__ consistently rather than the older linux. - build-fix for musl (report by Jonáš Vidra, adapted patch by Khem Raj): - modify ifdef for USE_OPENPTY, changing test for __GLIBC__ to __linux__ - change ifdef's for _POSIX_SOURCE to _POSIX_VERSION - modify ifdef for setsid to use a configure-script check for that function's existence and move the old check to imake fallbacks. - minor consistency fixes for manpage. - fix regression in patch #390: non-UTF8 text pasted as a XA_UTF8_STRING was not decoded (report by Petri Kaukasoina).
x11/xterm: update to 390 Patch #390 - 2024/02/19 - improve typography of control-sequences page (patches by Branden Robinson). - amend UPSS change from patch #389, fixing a regression in VT100/VT220 character sets. - modify ANSI conformance per ECMA-43 and DEC 070: - set ANSI conformance level to 3 for DEC levels 2 and up. - disable locking shifts in level 1, e.g., VT100. - disable single-shifts from G2/G3 in level 1. - use UPSS for G2/G3 in levels 2 and up. - modify invisible-character attribute to permit DECRQCRA to report a consistent checksum (report/testcase by Thomas Wolff). - align terminfo building blocks in terminfo to correspond to recent refactoring/trimming in ncurses. - set flag in regexec call for onNClicks to handle “^” anchor (patch by Matthew Martin). - add line-drawing data for the characters in DEC Technical which have no Unicode equivalents. - remove a special case in encode_scs which made xterm report Latin-1 when encoding is set to UTF-8, where ASCII is the selected character set. This fixes a regression in vttest for the DECRSPS cursor test. - correct values for Ps of DECAUPSS in ctlseqs.ms (report by James Holderness). - simplify/correct expression for checking Unicode non-characters (report by Thomas Wolff). - correct loop for trimming environment variables (report/patch by Casper Dik). - fixes for manpage formatting (Debian #1041809). - update config.guess, config.sub
x11/xterm: update to 389 Patch #389 - 2024/01/01 - interchange variables in subparameter parsing, fixing a bug where subparameters after the first parameter could be misidentified (patch by Adam Saponara). - correct popping of icon/window titles in a case where only one was pushed from patch #385 changes. - add XTQMODKEYS response in DECRQSS, as alternative for vim. - correct DECCIR encoded information on character set size, handle a VT525 quirk, and add DECST8C (Windows Terminal #14984). - improve DECRQCRA (prompted by discussion with James Holderness, Windows Terminal #14974). - add part of VT525 color controls: - DECAC, to update default foreground/background, respond to DECRQSS - DECATC, to respond with DECRQSS - prevent Unicode non-characters from being printed (prompted by patch by Grady Martin). - modify send_SGR() to avoid modifying colors 16 to 255 in printed output (patch by Grady Martin). - minor cleanup of miscellaneous error-codes with ERROR_MISC. - remove legacy CSI 53 for locator status, corrected in patch #294. - modify DECRQUPSS and DECAUPSS feature to support VT5xx character sets (report by Thomas Wolff). - improve configure script: - reduce configure-check compiler warnings (prompted by Florian Weimer, Redhat #2251945) - improve usage messages in configure script to make it clearer when an option value is optional. - improve EWMH handling (report/analysis by Edward Rosten) - reset _NET_WM_STATE_HIDDEN flag from _NET_WM_STATE before mapping the window to deiconify. - cache X properties to reduce latency (adapted from patch by Edward Rosten).
x11/xterm: update to 388 Patch #388 - 2023/10/22 - improve disallowPasteControls by adding a category for the special characters known to stty (prompted by discussion with David Leadbeater). - amend support of DECAUPSS, undoing change to initialization of G2/G3 so that pasting of GR characters works properly (report/analysis by Petri Kaukasoina). - update config.guess, config.sub Patch #387 - 2023/10/15 - add DECRQUPSS and DECAUPSS. - add DECRQDE (report by Jake Hamby). - correct indexing expression in title-stack, from patch #385 changes (report by Brian Lindholm). Patch #386 - 2023/10/09 - improve references in ctlseqs.ms (prompted by discussion with Kirill Chibisov). - make the maximum amount of memory used for buffering DCS and OSC strings configurable with maxStringParse resource (report by Daniel Franke). - improve performance of ReGIS when initializing the largest fontsize (report by Ben Wong). - fix regression in SIXEL colors, in patch #385 (report/patch by Jonny Langley). - fix typo in --with-wtmp (report/patch by Sven Joachim)
x11/xterm: update to 385 Patch #385 - 2023/10/01 - fixes for ReGIS (report by Ben Wong). - correct conversion from HLS to RGB - improve font-caching performance. - update tables in wcwidth.c based on Unicode 15.1.0 - improve fastScroll resource: - suppress screen-refreshes for carriage-returns - add -jf option to simplify use of this resource. - add a control sequence for enabling/disabling the resource. - enable this feature by default - extend title-stack feature to allow an additional parameter to directly access the stack, like the XTPUSHCOLORS and XTPOPCOLORS feature. - correct size and position of box shown for double-cell character which happens to be missing from the bitmap font (report by Peter Fabinski). - improved configure script: - add pattern for uClibc-ng to CF_XOPEN_SOURCE (report/patch by Waldemar Brodkorb). - add configure options --with-utmp-path and --with-wtmp-path to override configure script's check for utmp/wtmp pathnames which are shown in the manual (Debian #1042767). - CF_XOPEN_SOURCE provides for defining _DEFAULT_SOURCE for MinGW32 and MinGW64. - sed expression used to report gcc version now works with MinGW - ensure that line-attributes are reset after drawing missing character (report by Christian Weisgerber). - update config.guess, config.sub
x11/xterm: update to 348 Patch #384 - 2023/07/10 - exclude ASCII space from showMissingGlyphs, since a few bitmap fonts lack this (report by "SanRemo", Emanuel Haupt). - correct a step in rendering double-width characters with bitmap-fonts (report by Peter Fabinski, Debian #1039986). - fixes for ReGIS-related problems (report by Ben Wong): - mimic an undocumented hardware VT340 feature which handles color initialization with incomplete parameters. - handle whitespace between operator/operands for color values. - reset ReGIS-context when resetting graphics in RIS.
x11/xterm: update to 383 Patch #383 - 2023/06/27 - expand description of full- and soft-reset in the manual. - fixes for full- and soft-reset: - clear alternate screen on full reset. - disable menu-entry for active icon; it merely shows whether the feature is enabled. - use appcursorDefault and appkeypadDefault resources for reset of DECCKM and DECKPM. - save initial resource values for sixelScrolling and privateColorRegisters, using those in full reset. - update checkbox for Enable Blinking Cursor (report by Rajeev V. Pillai). - add reply for DECSACE with DECRQSS. - modify status-line feature to exit without erasing for DECSTR. - add private mode 1045 which imitates the original xterm cursor-back reverse wrapping mode 45 (see patch #380). - improve checks for non-Unicode values, e.g., in DECRQCRA. - re-checkout from RCS archive to fix stale identifiers (report by Sven Joachim).
xterm: update to 382. Based on a patch by pin@ x11/xterm: update to 382 Patch #382 - 2023/05/30 - amend change to CursorBack in patch #380, allowing the result to be on the hidden right-half of double-cell characters (report by Rajeev V. Pillai). - amend xtermDrawString, fixing regression with --disable-wide-chars configuration from patch #380. - corrected pathname for run-tic.sh, for full install in an out-of-tree build (report by Rajeev V. Pillai). Patch #381 - 2023/05/28 - fix a regression in wide bitmap fonts versus check for missing glyphs (report by Rajeev V. Pillai). Patch #380 - 2023/05/09 - simplify the change for sixelScrolling from patch #374 (report by Per Bothner). - add xterm+focus and report+da2, update report+version building blocks in terminfo, from post-ncurses 6.4 - drop the -title option from uxterm and koi8rxterm, because that interferes with deriving the default title from the -e option (Debian #1031837). Compensate for this by using the -class option to derive a default title. - improve description of readline 2003 mode in ctlseqs.ms (report by Thomas Wolff). - other improvements to status-line feature (report by Thomas Wolff): - clear status line on DECCOLM - ignore DECSASD if no previous DECSSDT - allow DECSSDT 1 immediately after DECSSDT 2, i.e., without switching back to host mode. - adjust RequestResize to avoid shrinking screen when using DECCOLM while the status-line is active (report/patch by Thomas Wolff). - disallow wrapping before the beginning of the screen, to the end of the screen, for cursor-back sequences (Redhat #2182357). - modify makefile to install the 16x16 xpm files (report by Harald Dunkel). - update test-package to reflect resolution of Debian #906901. - change default of showMissingGlyphs to True. - improve handling of double-sized characters when those happen to be missing from the bitmap font and/or are fullwidth. - pointer/overflow fixes (reported by David Leadbeater): - improve limit-checks for control-sequence numeric parameters in SIXEL graphics. - add null-pointer checks in WriteNow macro to handle a case where SS2 or SS3 might be in effect while processing a combining character. - disallow ReGIS reporting for character-set names containing characters other than alphanumerics or underscore. - implement TrueType fallback font for double-sized characters, including Unicode fullwidth. Also add limitFontHeight to provide for configuring the distinction between slightly-oversized glyphs and double-sized glyphs. - configure script improvements: - check for nfsd_t - fix a typo in the underline cursor thickness derivation (patch by Jan Engelhardt).
x11/xterm: update to 379 Patch #379 - 2023/02/15 - improve text-cursor (patch by Jan Engelhardt): - allow selecting CURSOR_BAR mode from command-line/Xresources. - draw cursor using filled rectangle instead of rectangle outline to permit thicker underlines/bars. - scale up cursor relative to font size. - improve readline modes (Fedora #2166860): - document readline modes - change the feature to configure by default - replace hard-coded SS3 for cursor movement with current mode - replace hard-coded erase/lnext characters with current values - improve status-line (report by Thomas Wolff): - RIS turns off status-line - Right-margin (DECLRMM and DECSLRM) limits the length of text written/updated in the status-line. - Most controls which affect the whole screen are ignored while updating the status-line. - modify configure check for tgetent to allow for some special cases of ncurses configuration (report by Satadru Pramani). - reduce timeout, improve warning message if resize is run on a terminal which is not VT100-compatible. - reduce compiler warnings in configure script. Thanks to @wiz for help with initial build failure.
x11/xterm: update to 378 Patch #378 - 2023/01/09 - improve descriptions of XTQMODKEYS and XTQALLOWED features in ctlseqs.ms (reports by Bram Moolenaar, Thomas Wolff). - add bracketed+paste and report+version building blocks to terminfo, from ncurses 6.4 - improve check for unsupported formatting characters, e.g., zero-width space, to properly ignore them (report by Thomas Wolff). - improve/document error-checking for some of the controls which return responses: DECRQSS, XTGETXRES, XTSETTCAP, XTGETTCAP (prompted by discussion with David Leadbeater). - improve limit-checks for fallback font cache (report by Dimitrije Erdeljan). - improve check for too-wide glyph in fallback font by allowing xterm to continue searching for a suitable font rather than just failing on the first. Also add limitFontWidth to allow changing the amount by which a glyph must extend outside the font's bounding box to disallow it.
x11/xterm: update to 377 Patch #377 - 2022/11/25 - add control sequences for reporting the current state of the modified keys options (XTQMODKEYS) and allowed/disallowed operations (XTQALLOWED), (prompted by discussion with Bram Moolenaar). - amend modifyOtherKeys case 2 to distinguish the escape character with modifiers, e.g., shift-escape, from a plain escape character (suggested by Bram Moolenaar). - improve parsing and error-recovery in the case where a list of X11 bitmap fonts is given in the -fn and related options. - change default for xftTrackMemUsage to false, because libXft has does not handle certain fonts. Patch #376 - 2022/11/16 - modify configure script to always check for gcc attributes, - update install-sh. - fix parsing of result -u in vttests/halves.pl. - add a note in ctlseqs.ms about compatibility of TBC. - fix a copy/paste error in manual (patch by Grady Martin). - add null-pointer checks in x_strcasecmp and x_strncasecmp, to help with error-recovery for a missing font (Debian #1022942).
x11/xterm: update to 375 - improve error-recovery when setting a bitmap font for the VT100 window, e.g., in case OSC 50 failed, restoring the most recent valid font so that a subsequent OSC 50 reports this correctly (report by David Leadbeater). - exclude MC_XDG_OPEN from environment variables trimmed on startup (report by Gabor Hauzer). - check for null pointer in isSelect() (report by Column Paget).
x11/xterm: update to 374 Patch #374 - 2022/10/10 - eliminate use of grep aliases from vttests scripts. - amend discussion of DECSDM versus Sixel Scrolling in ctlseqs.ms (reports by Hayaki Saito, Ben Wong). - change default for sixelScrolling resource to better match VT330/VT340 DECSDM setting (patch by Ben Wong). - fix some gcc and coverity warnings. - improve memory usage for OSC 52 (report by David Leadbeater). - fix regression in xterm-373 change adding resources xftTrackMemUsage to xftMaxGlyphMemory, which did not first cache the server's resource-settings (report/testcase by Gabor Hauzer, as well as Debian #1021243). - fix regression in xterm-373 change for status-line vs alternate screen (report by Rajeev V. Pillai). - configure script improvements: - modify CF_XOPEN_SOURCE to handle more special cases of Linux (reports by Adam Sampson, Sven Joachim). - modify checks for egrep/fgrep aliases to work around warning messages from GNU grep 3.8 Patch #373 - 2022/09/25 - improve rendering of TrueType fonts: - add resource xftTrackMemUsage to enable/disable a new feature of Xft which improves performance. - add resources xftMaxGlyphMemory and xftMaxUnrefFonts to customize memory-usage of Xft and fontconfig. - provide for display of colored fonts in libXft 2.3.5 - allow for an extra TrueType font to be specified using the -fa option, as an override to the fontconfig scheme of fallback fonts (request by Nickolas Raymond Kaczynski). - improve caching of TrueType missing-glyph tests. - allow no more than 255 fonts to be scanned for a fontset. - eliminate a table-lookup in findXftGlyph - improvements status-line feature: - save/restore wraparound flag when updating the status-line (report by Rajeev V. Pillai). - avoid clearing the status-line when switching between normal and alternate screens (report by Valtteri Vuorikoski). - remove adjustment from update_winsize leftover from initial work (report by Valtteri Vuorikoski). - modify wcwidth tables to separate Unicode Cf category as formatting control-characters, to better match the guideline for unsupported characters (report by Tim Chase). - add configure option --disable-exec-selection. - use mkstemp where mkdtemp is unavailable, when initializing colored cursor. - adapt fixes from OpenBSD xenocara: - improve ifdef's for a few optional features. - correct #ifdef to #if in a few uses of OPT_PRINT_ON_EXIT. - set StartupWMClass in “.desktop” files, e.g., to help cinnamon-session notice that xterm sets WM_CLASS and use its icon (patch by Richard de Boer). - disable pixel computation when rgb width is greater than 8, to work with depth 30 (patch by Denis Kaganovich). - improve color-computation for SGR 2 faint/dim (patch by Boian Bonev). Add resource faintIsRelative to specify if the modified computation should be used (prompted by discussion with Matthieu Herrb). - correct comparison-length for environment variable cleanup (patch by Brendan O' Dea). - correct dsl capability for dec+sl block in terminfo (report by Rajeev V. Pillai). - improve output formatting by vttests/utf8.pl - repair test/demo scripts still using "vxt-" prefix, some cleanup with shellcheck. - enable page-number for DECXCPR response in VT330. - amend change for combining characters in patch #371 to limit it to the currently-defined codes (report by Thomas Wolff). - add directory-template parameter to mktemp in shell-scripts to improve portability to older systems (patch by Ryan Schmidt). - mention webpage XTerm – bracketed-paste in ctlseqs.ms - update manual-page descriptions for allowPasteControls and disallowedPasteControls (patch #363). - further extended list of environment variables to purge on startup (suggested by Thomas Wolff). - update config.guess, config.sub
x11/xterm: update to 372 Patch #372 - 2022/03/09 -amend allocation/freeing of scrollback lines, eliminating an adjustment for status-line added in patch #371 (report/testcase by Rajeev V. Pillai). Patch #371 - 2022/02/24 -drop double-buffer default from test-packages, since that interferes with status-line. -add faceSize7 to table in charproc.c, overlooked in patch #360 (patch by Vladimir A. Pavlov). -use XDrawString rather than XDrawString16 for text when the latter is not needed. -improve performance for initializing/reusing graphic objects in the SIXEL feature. -improve error-checking for resize. -fix errata in manual page (Debian #988221). -extended list of environment variables to purge on startup, i.e., in case a user starts xterm from another terminal emulator. -add comment in cursor.c to explain why autowrap (DECAWM) does not apply to data saved/restored with save/restore cursor-operations (report by Thomas Wolff). -add special case in generating the combining-character table in wcwidth.c, for Hangul Jamo Extended-B (report by Luis Javier Merino). -simplify/improve portability of trap commands in shell-scripts. -update configure options --disable-rectangles, --disable-tcap-fkeys and --disable-tcap-query to account for changed default settings. -rather than ignore empty parameter for setting title, use that to reset it to “xterm” for scripting. -check for out-of-bounds condition while drawing sixels, and quit that operation (report by Nick Black). -add fallback definition for PROJECTROOT so that a suitable default location for luit will be compiled-in on build-servers. -implement DEC status-line controls DECSASD/DECSSDT: decode controls, set state implement DECRQSS responses implement indicator-style status-line add configure option --enable-status-line add resource indicatorFormat implement host-writable status-line, able to handle video-attributes and simple left/right cursor movement. This disallows all of the DEC/xterm private modes such as switching to/from the alternate screen. move the status-line if the window is resized. Note: the associated screen-resizing does not work for the special case of TrueType fonts with double-buffering (see note in patch #349). -modify configure-script fixup for -Werror options to exclude fixup for -Werror=format, e.g., -Werror=format-security. -amend change from patch #370; DEC 070's pseudo-code for DECCOLM incorrectly suggests that it enables DECLRMM as a side-effect. -fix some memory leaks seen using esctest and asan2 (patch by Luis Javier Merino).
xterm: add patch for CVE-2022-24130 From upstream. Bump PKGREVISION.
x11/xterm: update to 370 -add -a, -c and -d options to query-status.pl to improve test for DECRQSS. -expanded discussion of maximum graphics geometry in ctlseqs.ms (suggested by Bon Wong). -corrected parameter symbol for DECCARA and DECRARA in ctlseqs.ms to indicate that multiple parameters may be used (report by Thomas Wolff). -add several test/demo scripts. -improve DECCOLM, DECLRMM and DECALN referring to pseudo-code in DEC 070. -amend a change in patch #348 which caused left/right margin mode to be reset when resizing the terminal window (report by Valentine Barshak). -fix a misnamed macro-parameter (patch by Rajeev V. Pillai). -fix spacing of wideFont when its width is not exactly twice as wide as the normal font (report by Rajeev V. Pillai). -suppress loading of italic font in a few places when colorITmode is enabled (report/analysis by Rajeev V. Pillai). -modify XTSMGRAPHICS to return failure status if the terminal is not configured to support the corresponding ReGIS or SIXEL feature (report by Nick Black, notcurses #2252, notcurses #2257). -modify DECERA and DECFRA to erase corresponding area in SIXEL graphics (patch by Nick Black, notcurses #1740, vt340test #16). Also modify DECSERA. -equate visuals for TrueColor and DirectColor (patch by Denis Kaganovich). -correct computation for pixel value of rgb when using depth 16 (report by Denis Kaganovich). -correct wrapping of VT100-style double-sized characters when configured for Unicode wide-characters (report by Luis Javier Merino). -updated default value for sixelScrolling resource to match expected behavior versus DECSDM change in patch #369 (report by Grant Taylor).
x11: Replace RMD160 checksums with BLAKE2s checksums All checksums have been double-checked against existing RMD160 and SHA512 hashes Unfetchable distfiles (fetched conditionally?): ./x11/py-qt4/distinfo PyQt4_gpl_mac-4.12.3.tar.gz
x11/xterm: update to 369 -modify run-tic.sh to work around bug in development version of ncurses which was packaged in FreeBSD ports. -remove ifdef's for OPT_COLOR_RES and OPT_COLOR_RES2. -improve performance over slow connections (report by Harald Dunkel). -update cursor if restoring mode for DECTCEM. -modify CharWidth macro to ensure that the shortcut for Latin-1 is only applied when UTF-8 is not enabled, to fix a bug in handling soft-hyphen from patch #334 changes (patch by Martijn van Duren). -improve terminfo: -fill-in function-keys in terminfo which are not Sun/HP keyboards using xterm+nopcfkeys building-block. -add kbeg to xterm+keypad to accommodate termcap applications -add smglp and smgrp to vt420+lrmm, to provide useful data for the "tabs" +m option -support shift-tab in Sun, HP and SCO keyboards. -document some legacy features in ctlseqs.ms (prompted by discussion with Jimmy Aguilar Mena "Ergus"). -add “trim” option to cdXtraScroll and tiXtraScroll. -remove support for non-fifo save-lines configuration. -extend cdXtraScroll to check if the cursor is at the upper-left of the scrolling region when the erasure is for the remainder of the screen versus the whole screen (prompted by discussion with Jörg Breitbart). -add workaround for broken pcre2 package in Debian 10. -change screen-refresh call used for DECCARA and DECRARA to ensure that trailing blanks which are part of the rectangle are repainted (report/analysis by Dennis Filder). -when resetting the terminal, ensure that the cursor shape also is reset, e.g., if DECSCUSR has been used to modify the cursor shape for an xterm which was started with the underlined cursor option (report/analysis by Luis Javier Merino). -prevent DECSCUSR from blinking the cursor if the cursorBlink resource is “never” (report by Vladimir D Seleznev). -invert the sense of DECSDM, to correspond with VT382 manuals (lsix #41). -update tables in wcwidth.c based on Unicode 14.0.0
x11: Remove SHA1 hashes for distfiles
x11/xterm: update to 368 Patch #368 - 2021/06/07 -add DefaultOff option to RenderFont resource, as part of the session-management feature. -add auto-scroll-lock feature (patch by add Stelios Bounanos). -update the window-size information returned via TIOCGWINSZ when rows/columns are unchanged but the font-size changes (report by Nick Black). -improve session-management feature by saving/restoring the font settings. -update config.guess, config.sub
x11/xterm: update to 367 Patch #367 - 2021/03/26 -add OSC 22 to allow programs to select different pointer cursor at runtime. -change configuration for no-return functions to use _Noreturn when it is available, because clang --analyze does not properly handle the gcc noreturn attribute. -add cursorTheme resource to provide a way to enable or disable the cursor theme feature. -modified CopyWait event retries to use shorter sleeps, to improve responsiveness (tmux #2556). -improve quoting/escaping in demo-scripts per shellcheck. -add resizeByPixel resource, to permit disabling window manager resizing-hints (patch by Tim Oehl). -corrected printOptsImmediate handling of alternate-screen (report by Abhijit Dasgupta). -update sample terminfo to more closely match ncurses. -add/improve limit-checks for Xlib calls (report by Roman Fiedler). -fix a typo in the help-message (report by Tomas Korbar).
Pullup ticket #6429 - requested by wiz x11/xterm: security fix Revisions pulled up: - x11/xterm/Makefile 1.131 - x11/xterm/distinfo 1.91 --- Module Name: pkgsrc Committed By: wiz Date: Thu Feb 11 09:02:52 UTC 2021 Modified Files: pkgsrc/x11/xterm: Makefile distinfo Log Message: xterm: update to 366. Patch #366 - 2021/02/10 correct a compiler-warning fix in patch #352 which allowed sign-extension of coordinate values (report by "CismonX"). correct upper-limit for selection buffer, accounting for combining characters (report/testcase by Tavis Ormandy). with alwaysHighlight true, xterm does not properly track focus. The screen->select FOCUS flag remains always on, which prevents bellIsUrgent from working, as the urgent WM_HINT flag is only set in setXUrgency() when the window is not focused. Fix this by updating screen->select in unselectwindow() regardless of the value of always_highlight (patch by Jiri Bohac). improve fix for interaction between SRM and ENQ (report by Grant Taylor). build-fix for --with-Xaw3dxft, needed when --with-toolbar is omitted (report by Jimmy Olgeni, Emanuel Haupt).
xterm: update to 366. Patch #366 - 2021/02/10 correct a compiler-warning fix in patch #352 which allowed sign-extension of coordinate values (report by "CismonX"). correct upper-limit for selection buffer, accounting for combining characters (report/testcase by Tavis Ormandy). with alwaysHighlight true, xterm does not properly track focus. The screen->select FOCUS flag remains always on, which prevents bellIsUrgent from working, as the urgent WM_HINT flag is only set in setXUrgency() when the window is not focused. Fix this by updating screen->select in unselectwindow() regardless of the value of always_highlight (patch by Jiri Bohac). improve fix for interaction between SRM and ENQ (report by Grant Taylor). build-fix for --with-Xaw3dxft, needed when --with-toolbar is omitted (report by Jimmy Olgeni, Emanuel Haupt).
x11/xterm: update to 356 Patch #365 - 2021/02/03 -Amend fix for “word” selection in patch #364 to limit that to the insert selectable action, which reads data from the screen. This restores the interactive behavior where double-clicking on a “word” would make subsequent selection extensions by words as well as suppressing some boundary-checks (report by David Wolfskill, FreeBSD #253225). Patch #364 - 2021/02/02 -Add -fc option. -Correct/improve limit-checks for SRM versus ENQ from patch #344 (report by Tom Szilagyi). -Enable XftFont resource in Xaw3dxft configuration (patch by Tavis Ormandy). -Improve quoting/escaping in build-scripts per shellcheck. -Add libpcre2-posix to the packages tested for --with-pcre2 option, needed with Fedora (report by Tomas Korbar). -Correct a typo in manual page, and note that KeepClipboard may not be compiled-in (report/patch by Sean C Farley). -Corrected boundary-checks for “word” selection used in onNClicks resources (report by Tavis Ormandy). -Update to autoconf-2.52-20210101, to improve shellcheck warnings. -Improve configure check for desktop categories.
x11/xterm: update to 363 Patch #363 - 2020/12/26 -disable groff hyphenation in generated html when using man2html. -change SCS “&4” Cyrillic to non-NRCS, per VT520 manual. -amend fix for SCS in patch #198 to remove DEL rather than converting it to a space (report by Thomas Wolff). -modify state transitions for selecting character sets to eliminate an ambiguity between the “A” used in VT220 versus VT320. -improve error recovery when selecting characters by resetting to US ASCII when no suitable encoding is found, e.g., attempting to use an NRCS sequence when NRCS is not enabled. -turn off hyphenation in “.txt” conversion, prompted by groff changes. -add VT5xx ISO Latin-2 (prompted by discussion with Thomas Wolff). -amend change from patch #361 to event-handling in CopyWait to handle active-icon as a special case (Debian #975687). -add call to loadColorTable to get the visual information needed to decode BE RGBA32 color format (patch by Leandro Lupori). -modify the resource-parsing for disallowedPasteControls and similar lists of names/numbers to recognize “~;” (tilde) for cancelling a given name/number. -add ENQ, EOT and NUL to default for disallowedPasteControls. -change default for disallowedPasteControls to omit the tab character (suggested by Harald Dunkel). -fix swapped height/width in regisScreenSize and maxGraphicSize resources using "auto" value, from patch #314 (report by Anton Lavrentiev) -revise patch #362 change for shift-modifier versus mouse protocol and select/paste by adding resource shiftEscape, which can be enabled via a control sequence (prompted by discussion with Matthijs van Duin). -simplify/improve ifdef in trace code for using a separate set of files for each run of xterm. -add options -r and -t to vttests/query-color.pl to show the 6-digit RGB code and actual colors. -add nel to xterm-basic terminfo. -alter vttests/modify-keys.pl to omit HTML reference links to the modified-keys table where no keycode was available.
x11/xterm: update to 362 Patch #362 - 2020/11/11 -cleanup of calls to free, removing checks for null (Walter Harms). -improved mouse-button reporting (prompted by discussion with Stephane Chazelas) -narrow the scope of the change for shift-key in patch #361 to make it apply only when the modifyOtherKeys resource is set to 2 (i.e., “program mode”). Also, when checking the shift-key, ignore modifiers other than shift, control and “meta” -use the alt/meta modifier information obtained in VTInitModifiers to replace a hard-coded mod1 used to detect “Meta” for mouse-button responses. -reduce SIGWINCH's sent to the client by filtering out duplicates. -improve display when scaleHeight is greater than 1: -the text-cursor is vertically-centered on the current line, rather than only extending below the current line (report by Manu Chaturvedi). -the built-in line-drawing characters extend to the scaled cell-height. -fill-in special case for motion-events to match the changes for shift-key in pointer-button events from patch #361.
x11/xterm: update to 361 Patch #361 - 2020/10/14 -treat the return value of strerror as readonly (patch by Philipp Klaus Krause). -modify event-handling in CopyWait to work around hanging while writing large amounts of text to an active icon and at the same time iconifying/deiconifying (report by Dave Kemper). -initialize double-buffer for active-icon window. -improve manual page description of scrollbar resources (report by Brian Lindholm). -correct ifdef for menu entry for active-icon, when initializing it with toolbar configuration. -add preprocessor option to makefile to set internal definition of pixmaps directory to match the install-configuration (FreeBSD #250036). -cleanup of calls to free, removing checks for null (Walter Harms). -add fallback actions pointer-button and pointer-motion which handle events for the mouse control-sequences protocol if the select-related translations are omitted with *omitTranslation:select (prompted by discussion with "Ergus") -amend rule for using shift-key to override mouse-
x11/xterm: update to 360 Patch #360 - 2020/09/20 -mention decGraphicsID in ctlseqs.ms (suggested by Thomas Wolff). -modify pixel-coordinate mouse reponse to use as origin the VT100-window rather than the underlying widget, which includes the scrollbar (report by Thomas Wolff). -add configure option --disable-print-graphics (Ross Combs). -add test_ptydata to make check rule. -minor fixes for ctlseqs.ms (report by Jean-Marc Bourguet). -minor fixes for manpage style (report/patch by "a1346054"). -correct cleanup from switch between italics/normal font in the show/hide cursor functions (report/testcase by Peter Fabinski). -integrated patch by Ross Combs: -internal renaming of GraphicsID symbols, for readability. -adjust logic for VT125, treating it as a ReGIS terminal. -update configure macros, for compiler-warning fixes. -integrated patch by Ross Combs: -add control sequence modes for graphics printing. -improve conversion to bitmaps for TrueType fonts in ReGIS -add font7 resource, for an enormous bitmap font. -do not reset graphics in a soft-reset. -add pointerFont resource, and -pf command-line option. -improve typography of manual page (patch by Branden Robinson). -amend patch #359 change to df-install.in to ignore a command-line assignment to DESTDIR if followed by an explicit --dir (report by Sven Joachim).
x11/xterm: update to 359 Patch #359 - 2020/08/17 -add special case in WriteText to allow colors 8-15 to -override colorBDMode (patch by Ingo Brckl). -add utf8Weblike resource, to provide an alternate scheme for handling ill-formed UTF-8 sequences (adapted from patch by Dan Gohman). -improve computation for the number of lines needed to scroll-up a SIXEL graphic (report/patch by Ben Wong). -correct manpage description for default value of disallowWindowOps from changes in xterm #331 (patch by Ben Wong). -correct a loop starting-point in refresh_graphics from optimization in patch #358 changes (report by Ben Wong). -add a new mouse mode 1016, which uses the same format as mode 1006, but sends the mouse's position in pixels (suggested by Igor van den Hoven). -fix an issue from patch #338 changes where only the first selection buffer specified in the request would be updated using OSC 52 (patch by Michael Gulick). -modify makefile/scripts to allow DESTDIR to prefix the target directory for desktop-file-install (report by Fred Heitkamp). -enable SIXEL feature by default. -update config.guess, config.sub Note: sixel-graphics should now be enabled by default. Hence, I've removed the corresponding CONFIGURE_ARGS. If you experience any issues please report and I'll add it back if needed.
x11/xterm: update to 358 Patch #358 - 2020/07/12 -correct logic for decodeTerminalID changes in patch #357 (report by "Chartreuse"). -modify makefile to use plink.sh when linking test-programs, to fix build when using pcre (report by H Merijn Brand) -build-fix for test_ptydata program (patch by H Merijn Brand) Patch #357 - 2020/07/05 -several minor optimizations for the ReGIS and SIXEL features, improving performance by 10%. -add resource decGraphicsID to allow displaying graphics when the emulation level would ordinarily disallow this (prompted by discussion with Thomas Wolff). -add control sequences for fast switching of color palettes: XTPUSHCOLORS, XTPOPCOLORS, XTREPORTCOLORS -amend change for soft-hyphen from patch #328 to avoid stripping replacement- characters which would be shown with malformed or overlong UTF-8 input. -corrected an error-handling case in decodeUtf8, matching a similar fix in patch #268 (report/patch by Dan Gohman). -add a test-driver for ptydata.c -minor cleanup of macros (adapted from patch by Walter Harms). -fix some errata in ctlseqs.ms (report by Thomas Wolff). -allow immediate repaint-on-palette-changed if double-buffering is enabled. -deprecate codes 10/11 in sgr push controls, changing those to 30/31, to avoid confusion with sgr 10-19. -modify SGR parameter handling to stop if an unrecognized parameter is encountered, to guard against malformed or nonstandard sequences (report by Bram Moolenaar). -modify DECERA color for consistency with other erasures/clearing (report by Thomas Wolff). -ECH should not be masked by DECSCA (report by Thomas Wolff). -extend DECFRA and REP to accept any graphic character rather than just Latin1, etc. (report by Thomas Wolff). -add -C option to 256colors2.pl and 88colors2.pl, to demonstrate mixed semicolon /colon separators which are implied by ECMA-48. -update sample terminfo to reflect the documentation improvements. -update description of 88/256/direct color in ctlseqs.ms to point out that using semicolons is a deprecated legacy feature, and standard terminal applications should use colons (prompted by discussion with Bram Moolenaar). -modify configure-check for tgetent to conditionally include termcap.h, enabling configuration using clang's pedantic-errors option (report by Dennis Clarke). See Other Compatibility in ncurses' curs_termcap(3X). -remove some unnecessary pointer checks (patch by Walter Harms). -accept terminal-id and add DA response for VT131, VT132. Patch #356 - 2020/05/02 -revise fix for Debian #954730, which interfered with wheel mouse events (report by Gabriele Balducci). Patch #355 - 2020/05/01 -revise fix for Debian #954730, which interfered with wheel mouse events (report by Henri Menke). -fix typos in documentation (reports by Stephen Hurd, Stefan Assmann). -add mapping for decTerminalID for 100 overlooked in patch #354. -update tables in wcwidth.c based on Unicode 13.0.0 -build-fix for make check when building out-of-tree (report by Sven Joachim). Patch #354 - 2020/04/26 -work around performance problems of XDrawImageString and XDrawImageString16 functions (Debian #954845). -add a control sequence which reports xterm's version (patch by Nicholas Marriott, mintty #881). -temporarily set numeric locale category to "C" when parsing resources, so that scaleHeight and faceSize settings do not depend on locale (Debian #820803). -improve DA/DA2 response by ensuring that the decTerminalID maps to one of the known identifiers, as well as providing DA2 response for VT241 and VT382. -terminfo improvements: -add (my) comments from ncurses which explain the keypad layouts. -add vt52+keypad from ncurses -use improved xm example for xterm+x11mouse, xterm+sm+1006 from ncurses 6.2 terminfo.src -two fixes for left/right wheel mouse event reporting (Debian #954730): filter identical button-events correct order of button-range versus protocol type (see patch #345) -change make check makefile-rule to use test-drivers for charclass and wcwidth data. -quiet did not find a usable xxx TrueType font warnings by making fontWarnings apply to these messages (report by Jim Rees). -improve reinitialization of parameter list (report/testcase by James Holderness). -temporarily set numeric locale category to "C" when formatting SVG or XHTML screendumps, to make the radix separator used in RGB values consistent (adapted from patch by George Kouryachy). -add resource forceXftHeight to control whether workaround from Debian #880407 is used. -apply updated ascent/descent in workaround from Debian #880407 to fix a 1-pixel gap in built-in vertical lines (report/testcase by Stefan Assmann). -improve round-off of scaling for built-in line-drawing (prompted by discussion with Stefan Assmann). -adjust fonts in svg-icon files to accommodate reduced functionality of new pango (report/analysis by YOKOTA Hiroshi). -improve configure check for X Toolkit library. -correct Y-coordinate transformation in ClearCurBackground, overlooked in changes for patch #334 (report/analysis by Chuck Silvers). -remove --vendor option from test-packages' install of desktop files; the feature is badly broken in gnome-shell. -modify uxterm to make it possible to select nonstandard locale C.UTF-8, e.g, if the user's locale is set to C (Debian #940626). -re-save/tweak .svg icon-files to work around breakage in toolset since the files were created in patch #283. Patch #353 - 2020/02/01 -amend change in patch #352 for button-events to fix a case where some followup events were not processed soon enough (report/patch by Jimmy Aguilar Mena). -handle MappingNotify X event, to improve recovery when switching keyboard configurations using xkbcomp (prompted by discussion with Frank Mosch, Debian #661295). There is more work needed here, possibly in the X libraries. improve discussion of mouse-mode in ctlseqs.ms (suggested by Igor van den Hoven). -further improve checks for Xft max-advance-width to take into account fonts which use two cells for ambiguous width characters. Also improve the time used for these checks (reports by Yuri Pankov, Frank Mosch). -fix a few spelling errors reported by codespell (report by Jens Schleusener). -modify run-tic.sh to prefer development version of ncurses since changes to terminfo file in patch #345 rely upon bug-fixes in ncurses (prompted by discussion with Will Senn). Patch #352 - 2020/01/16 -adjust fontsize data to handle a minor inconsistency from recent Xft versions (Debian #880407, adapted from patch by Vincent Lefvre). -add a table to the manual page description of forceBoxChars to alert the reader to the special characters aside from line-drawing which are drawn directly when this resource is set (Debian #931305). -improve checkXft logic which attempts to detect fonts whose max-advance-width is inconsistent with the actual glyph widths. For some fonts, it is necessary to check additional characters (report/analysis by Jan Engelhardt). -improve configure-checks for X headers and libraries on recent MacOS, which has moved those files under /usr/X11. -improve portability of iconify/deiconify feature by taking into account some window managers which manipulate the EWMH _NET_WM_STATE property, adding/removing _NET_WM_STATE_HIDDEN rather than actually minimizing the window (pon with Jrg Breitbart). -improve workaround from patch #287 fo postponing the extra request for minimizing the window to the key by itself can generate button-events (report/analysis by Maal page (patch by Larry Hynes). -add definitions in xterm_io.h updated autoconf macros -update config.guess Patch #351 - 2019-add -report-icons to help-message. -improved autoconf macros: update config.guess, config.sub -correct status in XTGETXRES resize from the struct-notify event handler to prevent -recursion(report by Stefan Assmann). -improve the note on the xterm-rep not ignore zero'd/blank cells. -align terminfo file with ncurs-add vttests/modify-keys.pl script to illustrate the modifyOtheines resource default value (Branden Robinson, Debian #913815).n is complete. -add a control sequence which, like tcap-query, in the imake configuration as they would be by default via the Sven Joachim). -build-fix for the case when configure --enableSven Joachim). -fix a few minor bugs found with Coverity. -add the --disable-doublechars configure option (report by Brian Lin-document window properties in the manual page. -improve title-le-string encoded in UTF-8, check if that is the case, and if iencoding (FreeBSD #240393). -Make sameName resource work for thn UTF-8 is active. -reorganize text-drawing to make it possiblen switching from 132 to 80 columns. -improve font-warning messafont-warning messages, to accommodate broken X configurations. ont (Redhat #1679790). That relies upon the :unscaled property configurations. -set a graphic-context for border when double-bg when switching to reverse-video. -build-fix for --disable-zic(report by Scott Bertilson). Patch #348 - 2019/07/22 -update wos types, to improve compiler-warnings. -ensure that when resetgins), and DECSTR. -corrected order of reset/move when setting ing margins, rather than only when the mode is changed (report fering configuration. -correct logic for filtering scrollbar-updescription of 1006 and 1005 mouse modes, to avoid implying thawere xterm extensions rather than VT100/VT220 terminal featuresnse (suggested by Thomas Wolff). -fix a typo, improve wording iolff). -fix off-by-one in VT52 graphics character mapping (patcarnings when building with imake. -update config.sub Patch #34esource to control the maximum rate of screen updates (report bed by report by Martin Hostettler). -correct off-by-one in paraestcase by Thomas Wolff). -add resource buffered to allow enablthat the needSwap flag is set after drawing TrueType text -corr video attributes. The attribute to use is in the left-half (reomas Wolff). -reset flags including wraparound and reverse-wrap(report by Thomas Wolff). -ensure that italic font is turned ofth binary-search table generated using updated uniset (report b name comparisons work when active-icon is enabled, since CSI13e since 2008 (see patch #238). Patch #346 - 2019/05/27 .update#862042). -account for internalBorder in useBorderClipping (repcharacters in wcwidth.c based on Unicode 12.1.0 (prompted by diort by Bram Moolenaar). -fix a sign-extension when reporting of run-tic.sh for HPUX, whose mktemp prints the name of a temporalation is VT420 (suggested by Thomas Wolff). -modify treatment discussion with Ben Wong, lsix #20). -modify button-handling tor after a direct-color to be ignored. -add resource useBorderClRobert Ross). -improve logic for displaying xterm's built-in li, as well as to demonstrate push/pop of the various color typesof indexed-colors, contrary to documentation. -reduce buffer-fl for OSC 5 use the 5 in the response; formerly it was mapped to request. -update tables of combining and unknown-width charact-add vttests/query-dynamic.pl -modify vttests/query-color.pl towhether to use OSC 5 rather than OSC 4. -modify cursor coloringmouse responses from patch #342 changes; the legacy protocol suy.pl to demonstrate batch queries with -q option. -increase reslation of predefined symbols -check for updated X Toolkit, whicrt by Emile LeBlanc). -documentation errata (patch by Larry Hynfull-screen mode. -window's border-size was incorrectly added t
xterm: update to 344. Provided by Thomas Dickey in private email. Patch #344 - 2019/02/12 * add ASCII escape to default for disallowedPasteControls (prompted by discussion with Martin Hostettler). * fix typo in ctlseqs.ms (Robert Ross). * implement DEC Cyrillic NRCS (based on screenshots of vttest provided by Markus Schmidt). * correct control returning sixel geometry maximum versus actual size (patch by Ben Wong). * improve manual page for resize to clarify that resize does not execute the shell commands which it generates for setting environment variables. * improve memory-management for parser, to handle response strings that might occur with ENQ or when SRM mode is active (patch by Martin Hostettler). * change Comment text in uxterm's desktop file to work around a limitation of GNOME's GIO application (issue #940). The documentation reads: Searches desktop files for ones that match search_string. The return value is an array of strvs. Each strv contains a list of applications that matched search_string with an equal score. The outer list is sorted by score so that the first strv contains the best-matching applications, and so on. The algorithm for determining matches is undefined and may change at any time. * a check of zIconBeep resource was removed in double-buffer fix in patch #334. That is used to decide whether to handle struct-notify events. When xterm does handle the events, it may negotiate a new window-size with the window manager. In that case, the limitResize resource setting limited the new window-size to the screen-size. Amended that by eliminating the limit for this special case when double-buffer is configured, and restoring the check for zIconBeep when double-buffer is not configured (Debian #919475). * disallow recursion which could happen if a user configures the answerbackString resource with the ENQ code and experiments with that code when SRM is enabled (report by by Martin Hostettler). * add remaining credits in COPYING file. * modify run-tic.sh to check if it is using an older version of ncurses which does not support large terminal descriptions, and if so, remove a non-essential feature to keep within the 4096-byte legacy limit.
Updated xterm to 330. Patch #330 - 2017/06/20 • updates for ReGIS (Ross Combs): □ remove redundant text command error check which broke T(B) and T(E). □ retain the loading alphabet number across multiple “L” commands. □ add S(T) delay handler. □ fix some color handling error messages. □ add stubbed-out macrograph handling. □ use fragment_remaining() and fragment_consumed() instead of manually checking position / length in various places. □ rename some local variables in string / extent / option parsing □ wrap some long lines. □ move macrograph command handling out of the top-level. • add a summary of the italic fonts loaded to -report-fonts option. • modify the font-lookup for italics to allow for “-i-” if no match is found with slant “-o-” (prompted by patch by Ben Wong). • change default values for mkSamplePass and mkSampleSize to reflect generally-improved locale support in various operating systems (FreeBSD # 219800). • modify wcwidth.c to return -1 for non-Unicode values, and adjust a couple of blocks to better match assumptions about ambiguous-width characters in other implementations. Also modify wcwidth.c to support configurable soft-hyphen, so there is no drawback to using this version rather than a system wcwidth. • amend change made in patch #328 for cursor-visibility to handle case where an application is updating the reverse-video state (FreeBSD #219800). • update tables of combining and ambiguous-width characters in wcwidth.c based on Unicode 10.0.0. • build-fix for --enable-sixel-graphics without --enable-regis-graphics (reports by Sven Joachim, FreeBSD #219945).
Updated xterm to 329. Patch #329 - 2017/06/12 * add control sequences for reading the Sixel and ReGIS graphics sizes (suggested by Ben Wong). * add a workaround for wcwidth returning -1 for characters which should have been printable (FreeBSD #219800). * fix a bug in font initialization from patch #328 (FreeBSD #219800). * fix a special case in HideCursor which assigned a bold font to the slot used for normal font in changes for italics in patch #307 (Debian #858304). * updates for ReGIS (Ross Combs): + Strings specified with no command are used as "comments". Print these in the log when tracing. + Catch attempts to use "alternate display" mode (AKA "blink") from the GIGI, but do not implement it. + The T(M) command should only multiply the height by 10, not 20. + Make the S(E) command reset more state than just the screen contents. + Remove two rotation variables which were only being printed. + Numerous minor fixes and comment updates in the R command. + Unknown R command option names trigger an empty response. + Fix the output position after printing rotated text (it was missing the the sign before). + Fix the position change with pixelvectors and rotated text (the rotation transform was not being applied). + Update the TODO list and remove a verification FIXME (slanted text positioning is correct as is). + Emulate the approximately 1.4x enlargement for text which isn't rotated at right angles. + Only update the color planes specified in the plane mask (the W command's F option). * fix a bug introduced by the changes to font information in patch #328. When processing the "checkfont" option of the locale resource, the program referred to the request data, to an array which was only allocated in the new/result widget (report by H Merijn Brand). * fix a missing assignment initialization to make the utf8 resource control whether escape sequences to enable/disable UTF-8 mode are allowed.
Updated xterm to 328. Patch #328 - 2017/06/01 * revise parser for charClass resource, making these improvements: + accept octal and hexadecimal values + allow embedded whitespace + allow the class after colon to be optional, e.g., to clear class settings for a range of characters. * add command-line option -report-charclass. * fix most lintian warnings about test-package * add eraseSavedLines resource. * document DECSED 3 in ctlseqs.ms (report by Ben Longmans). * improve integration between configure-events and updates for reported screensize, in particular when switching between vt100 and tek4014 modes. * modify selection-highlighting of reverse-video text to keep that distinct, e.g., by reversing the selection foreground and background colors as one would expect. This fixes a "useless" case in the description of highlightColorMode. * improve fix for Debian #759734, addressing a case where non-colored cursor would be invisible against reverse-video (see patch #311). * updates for ReGIS (Ross Combs): + the "H" option of the "T" command should multiply by 10, not 20. + display unknown glyphs as a solid block. + given a succession of text-direction options, use the last. + fix the direction of ReGIS slanted text so that negative values produce oblique output . + fix the ReGIS text direction option to only rotate characters when no following size option is used. * update terminfo to better match corresponding entries in ncurses, e.g., u8 pattern to match the VT220, VT420, etc., primary responses, as well as adding smxx and rmxx. * fixes from Jörg Sommer: + corrected a trace-message regarding maximum graphics-size; it used the similar ReGIS maximum size which might not be configured. + in do_select_regex, clear selection if there is no match. If the regex does not match anything around the cursor, the selection returned must be empty, otherwise the whole line is treated as a match. This way the command defined by exec-selectable will not be executed if there is no match. + modify limit in do_select_regex to include the character at the cursor in the match, making it easier to type something and then hit the key to trigger exec-selectable. + If exec-selectable or insert-selection is triggered by a mouse button click, the position of the mouse pointer should be used. This makes it easier to address any position on the window and it makes it possible to use the mouse, e.g., for applications such as mutt where you cannot move the cursor. * modify DECRC to save/restore xterm's last-column flag used to control wrapping behavior rather than manipulating DECAWM (report/analysis by Mattias Engdegård). * add configure option --enable-terminfo-env to use the value set by --with-own-terminfo for the $TERMINFO environment variable. That variable was set automatically for HPUX, but would be useful in other systems, e.g., for Solaris (request by Jeff Wieland). * fix a race condition when setting up a signal handler to timeout if opening /dev/tty hangs (patch by Tobias Stoeckmann). * review/cleanup resources which were not in the manual page (report by Maxwell Anselm): + add manual page description as needed. + drop resource name for menuBar, as unnecessary. + modify fallback numeric value for regisScreenSize resource to match that for maxGraphicSize. * updated configure macros CF_ADD_CFLAGS, CF_CC_ENV_FLAGS, CF_GNU_SOURCE, CF_MATH_LIB, and CF_XOPEN_SOURCE from other program-changes. * update config.guess, config.sub * change “maximum screensize” assumed by resize to 9999x9999, to accommodate people using the Unreadable font. * drop Utility from default value of --with-desktop-category (Debian #780176). * widen the configure script pattern used for finding related ".desktop" files, including “Terminal” * several minor improvements to font utility functions: + provide for later modification to implement font-sets by parsing the font resources as comma-separated lists. + parse -fn and -fa similarly, using “x:” and “xft:” prefixes for font name/family strings to distinguish between XLFD and Xft font specifications. + use loops to iterate over font classes + use getters/setters for font data to allow for on-demand lookups. + make the debugging trace for missing glyph less verbose since that interferes with the -report-fonts option. + refactor xtermLoadFont to make it clearer how some fonts are derived from others, e.g., bold, wide. + make the triggering and suppressing of font-warnings more consistent by storing the last state in the widget. + reduce font-warnings by checking for repeated warnings. * add vttests/query-status.pl * add vttests/closest-rgb * add special case for displaying soft-hyphen if it happens to fall at the right margin, and omitting similar case such as the BIDI markers, where a zero-width character is neither a control character nor a combining character (Debian #844325). * modify logic for OSC 52, manipulate selection data, to update the selection-time to include the latest X events. This fixes some cases where the selection was invalid, e.g., after an event due to focus-follows-mouse (report/testcase by Stephane Chauveau). * revise macro CastMallocN as new macro TextAlloc to make explicit use of sizeof(char) (prompted by patch by Cade Foster). * add “Mouse Ops” menu entry and related resources to allow runtime disabling/enabling of the mouse protocol escape sequences (discussion with Bob Proulx). * improve discussion of mouse actions versus protocol in the manual (discussion with Bob Proulx). * improve discussion of environment variables in the manual, pointing out where some features (such as termcap and the System5 COLUMNS and LINES variables) are used rarely, mainly to support legacy applications. * add examples of translations resource for select/paste, and for font-size changes to the manual. * minor reordering of some entries in ctlseqs.ms for consistency (report by Arran Ubels). * add -s option to 256colors2.pl and 88colors2.pl, to demonstrate modifying the “system” colors 0–15. * omit XFT_SPACING property from call to XftPatternBuild, to work around a bug in fontconfig for handling Google Go fonts, whose names sort in an order not expected by fontconfig, causing the request for a monospaced font to return italics, e.g., $ fc-match 'Go Mono:spacing=monospace' Go-Mono-Italic.ttf: "Go Mono" "Italic" (report by Giacomo Boffi on Stackoverflow). * modify minstall.in to improve a workaround added to the manual page in patch #182 to avoid having the C preprocessor used in the imake configuration strip out the comments in the character classes section (reports by Ted Unangst, Anthony J Bentley).
Updated xterm to 327. Patch #327 - 2016/10/07 * add a check in the function which handles end-of-line wrapping to ensure that C1 controls are allocated one column when allowC1Printable is set (Debian #738794). * use consistent error-checking after strtol calls, fixes a case where a query with OSC 6 did not ensure there was a valid color number (report by Alex Smith). * add -baudrate option, for testing ncurses. * always generate the CASE_xxx symbols in VTparse.h and Tekparse.h, as part of a change to improve debug-logging. This makes the build always depend upon awk. * modify allowC1Printable to disallow codes 160-254 as being equivalent to codes 32-126 when parsing escape sequences (Debian #839220). * amend fix from patch #326 for TrueType fonts to exclude the hidden character used for double-width cells (report by Grady Martin). * fix a typo in ctlseqs.ms
Updated xterm to 326. Patch #326 - 2016/09/25 updated appdata file (report by Richard Hughes). improve discussion of the different terminal emulations provided by xterm in the manual page. add examples of setting the icon title with/without the window title in the manual (Debian #833984). correct a limit-check when using a numeric value for extended Booleans e.g., *fullscreen:3 rather than a name such as *fullscreen:never. add action allow-bold-fonts improved formatting fixes for manual page, using script to find mismatches in spelling of resources, actions and menu entries. improve documentation of logging resources. fix a special case of flickering cursor by adding GraphicsExpose to the list of event types that should not trigger making the mouse cursor visible (patch by Joe Peterson). correct initialization of line-drawing in VT52-mode, overlooked in changes for patch #297 (report/patch by Ben Wiley Sittler). minor clarification of form-feed versus line-feed in ctlseqs.ms (suggested by David Kemper). amend fix for Debian #738794 to restore a check for missing characters which are not combining characters. Also fill in a corresponding special case for TrueType fonts (Debian #827905).
Updated xterm to 325. Patch #325 - 2016/06/05 improve manual page discussion of function keys (discussion with Ross Combs). further improve fix for Debian #545220 in patch #248, to avoid conflict with combining characters (Debian #738794). improve -hold option to avoid 100% CPU usage with NetBSD after closing the shell, which makes subsequent checks for X input events fail (prompted by patch by Pierre Pronchery). review #ifdef statements, listed those which do not have a configure option in xtermcfg.hin. fixed one case where the menu sensistivity for Print-All Immediately and Print-All on Error was not properly ifdef'd. modify terminfo entries for 16-, 88- and 256-color to reset palette with rs1 capability. accept legacy value of -kt as synonym for the oldXtermFKeys resource, and extend the full-reset logic to use the keyboard type set via -kt. modify ioctl calls for I_PUSH to first check if the module has been added, using I_FIND. This is needed for newer Solaris libraries with c11 support (adapted from patch by Alan Coopersmith). add check in getXtermCombining to ensure that combining characters were allocated (report by Tor Andersson). add configure option --without-xinerama to allow suppressing the extension (Gentoo #580936). update keysym2ucs.c based on Unicode 9.0 fixed most cppcheck --enable=all warnings, including for style (prompted by report by David Binderman). There was one bug-fix: RGB least-squares computation in allocateClosestRGB used only one ordinate add cppcheck to lint-like programs in configure script and makefile. updates for SIXEL and ReGIS (Ross Combs): Fixes some const correctness issues and points out an array lifetime issue Sixel drawing should still happen after an error if some commands have been processed Tiny steps toward reporting ReGIS input
Add a patch to avoid consuming 100% CPU in hold mode Without this patch, this happens every time the child exits. To reproduce, simply run "xterm -hold -e true". Submitted upstream on March 29th 2016. Bumps PKGREVISION.
Update xterm to 324: Patch #324 - 2016/03/10 updated configure macro CF_LD_RPATH_OPT from ncurses changes. provide alternate fix for Juha Nurmela's report by turning on POSIX signals if _POSIX_C_SOURCE is at least one. This is done to improve the behavior if a direct child process receives a STOP signal. revert change to CF_POSIX_C_SOURCE from patch #323 (reports by Ashish Shukla, Christian Weisgerber). Patch #323 - 2016/03/07 updated appdata and desktop files to add keywords (report by Richard Hughes). modify configure macro CF_POSIX_C_SOURCE to accommodate some systems, e.g., FreeBSD, which have separated their implementation specific preprocessor symbols from the POSIX ones, requiring both to be defined (report by Juha Nurmela). change the directory to the current working dir of the child process in exec-formatted and exec-selectable actions (patch by Alexander Pohoyda). correct typo in xterm.man (patch by Larry Hynes). correct typo in ctlseqs.ms (report by Shriramana Sharma). add feature to support XHTML and SVG screen dumps (patch by Jens Schweikhardt). correct response to DECRQSS when terminal id is less than 400 (patch by Iwamoto Kouichi).
Update xterm to 322: Patch #322 - 2016/01/02 fix regression due to incorrect fix for compiler warning when allocating storage for /etc/shells (reports by Ashish Shukla, Debian #809646). Patch #321 - 2015/12/31 add resource keepClipboard, escape sequence and action keep-clipboard. add optional feature to capture text copied to clipboard at the time of copying rather than at the time the clipboard contents are requested for pasting (patch by Milan Mehner). improve a special case where the -e option was used to pass a single-quoted command via luit, by wrapping it in a “sh -c” (report by Keith Hedger). minor fix for type-cleanliness when allocating storage for /etc/shells (Tobias Stoeckmann). fix a typo in manual page (Dan Church). fix minor file-descriptor leak; after calling openpty, the slave's file descriptor is not needed (report by Juha Nurmela). editorial change to ctlseqs.ms (report by David Gomboc). minor updates for autoconf macros. update config.guess, config.sub
Add SHA512 digests for distfiles for x11 category Problems found locating distfiles: Package modular-xorg-server: missing distfile xorg-server-1.17.4.tar.bz2 Package py-qt4: missing distfile PyQt-mac-gpl-4.11.1.tar.gz Package xservers: missing distfile xservers-3.3.6.5.tar.bz2 Package xview-clients: missing distfile xview3.2p1-X11R6.tar.gz Package xview-lib: missing distfile xview3.2p1-X11R6.tar.gz Otherwise, existing SHA1 digests verified and found to be the same on the machine holding the existing distfiles (morden). All existing SHA1 digests retained for now as an audit trail.
Update to 320: Patch #320 - 2015/08/28 correct documentation for %t format (report by Martin Tournoij). add %R for consistency to exec-formatted() and insert-formatted() actions. add %r format to exec-formatted() and insert-formatted() actions (patch by Martin Tournoij). Amend fix for Debian #794201 (report forwarded from Christian Jachmann by Emanuel Haupt, Debian #797008).
Update to 319: Patch #319 - 2015/08/19 add a section to ctlseqs.ms discussing control sequences and ECMA-48, to explain why C1 controls do not occur in the decoded characters from UTF-8 byte streams (prompted by discussion with Poul-Henning Kamp). modify check for cursor-theme from patch #301 to also check if the resource Xcursor.theme is set to a nonempty value before fallback to xterm's own dummy theme (request by Robert Kloefkorn). explain in ctlseqs.ms that some keys which normally send SS3-prefixes are changed to CSI-prefixes if key-modifiers are passed as parameters (report by George Nachman). correct double-free of font information when multiple problems are found, particularly for the wide fonts loaded via the -wc option (report/testcase by Nelson Beebe). make configure option --enable-builtin-xpms actually work (report by William Bulley). correct combination of -ls and -e options for utempter configuration (Debian #794201). NetBSD build-fix for OPT_RENDERFONT versus OPT_SHIFT_FONTS (patch by Matthew Green, forwarded by Thomas Klausner). fix a few minor bugs found with Coverity. update pixelvector handling (patch by Ross Combs): split pixel-based and coord-based functions with common parts factored out to a "raw" function add a "step" variant which loads a single PV digit make the graphic dirty upon resize or clear, fixing some missing refreshes (patch by Ross Combs) fixes scrolling to use user coordinates and move in the correct direction (patch by Ross Combs) several fixes/improvements for ReGIS whitespace and page-handling (patch by Ross Combs).
Update to 318: Patch #318 - 2015/04/12 * rename new(er) configure option --enable-initial-erase to --enable-pty-erase, since that conflicted with an existing option (report by Jens Schweikhardt). * fix cut/paste error in --with-builtin-xpms configure option (reports by Jens Schweikhardt, Ross Combs). * fix minor formatting issue in xterm manual (report by Jens Schweikhardt). * eliminate unnecessary "#(vi" markers in autoconf macros by using "(" to begin case-statement cases (suggested by Jens Schweikhardt). * minor fixes to improve const usage (Ross Combs).
Update to 317: Patch #317 - 2015/03/27 adapt example for exec-formatted from Lukas Zapletal's webpage to manual (Debian #780008). add a short usage section to the xterm manual, including notes on setting the window title (Debian #742477). revise a change made to ICH in patch #314 to address limit-checks (reports/testcases by Zoltán Keri and Joe Peterson, also reported by Christian Weisgerber).
Update to 316: Patch #316 - 2015/03/07 revert change to make DCH honor top/bottom scrolling margins. For the record, both the VT420 and VT520 reference manuals incorrectly state that "DCH has no effect outside the scrolling margins." fix regression in DCH introduced in adjustment for limit-check in patch #315 (report/testcase by Zoltan Keri, also reported by Christian Weisgerber). correct default value for configure option --enable-initial-erase; it should be "False", but in patch #315 it was "Maybe", which differed from default set in patch #192. Patch #315 - 2015/03/02 change default for --enable-narrowproto for Cygwin to "no" to better match contemporary configurations (report by Jens Schweikhardt, prompted by <a href= "http://stackoverflow.com/questions/28137618/what-is-a-narrow-prototype-and-why-would-i-need-one/28334574?noredirect=1#comment45022128_28334574"> discussion). provide OSC 106 as an alternative to OSC 6, avoiding conflict with one of Terminal.app's undocumented escape sequences (report by Egmont Koblinger). fix an off-by-one in comparison when autowrap and left/right margins are combined (report by George Nachman). modify DECBI and DECFI to work outside the left/right margins, since the vague VT520 reference manual could support that interpretation (suggested by George Nachman). correct response for DECSCUSR in DECRQSS (report/analysis by George Nachman). add DECSLRM to list for DECRQSS in ctlseqs.ms (report by George Nachman). improve limit-checks versus assert's in the debugging version (reports by George Nachman). correct a problem with multiple writes to the right-margin when autowrap is turned off (report by George Nachman, also reported in Gnome #744819 by Ulf Magnusson). modify DCH to honor top/bottom and left/right margins (report by George Nachman). correct off-by-one in comparison so that DL honors left/right margins (report by George Nachman). correct logic of DECSCL, which always set 8-bit controls as a side-effect (report by George Nachman). correct loop limit for DECSED 1, when DECSCA is enabled (report by George Nachman). fix a entry in csi_table for "$", needed for CSI [ $ z (report by George Nachman). remove restriction from patch #279 changes on DECIC and DECDC to left-right mode (report by George Nachman). correct PID value returned in response to DECRQCRA (report/analysis by George Nachman). fix an ifdef'ing problem, where --disable-dec-locator would turn off logic needed for DECIC and DECDC (report by George Nachman). correct order of parameters in report for CSI 1 9 t, which gives the screensize in characters (report by George Nachman). add null pointer checks for a case in DECCRA where part of the target rectangle lies outside the screen limits (report by George Nachman). remove extra "6" for selective erase from DA1 response (report by George Nachman). support Xinerama screen specification in geometry parsing (patch by Nicolas George). add configure option --enable-initial-erase to set ptyInitialErase consistently with manpage, as well as adding a table in manpage to clarify the relationship between the resources related to the backarrow key (Debian #775952). add configure --enable-builtin-xpms to simplify compiling-in the icons introduced in <a href= "#xterm_284">patch #284 (prompted by discussion with William Bulley). fix/improve autoconf macros: CF_WITH_APP_DEFAULTS, add paths for OSX CF_WITH_MAN2HTML, configure option "--with-man2html" provides "man2html" as alternative to groff's man/html conversion fix some minor issues in manpage (Jens Schweikhardt).
Update to 314: Patch #314 - 2014/12/28 fix a minor bug in the termcap-specific version of resize when the lines or columns values are at the very end of an incomplete termcap string (prompted by coverity report). improve paste64 feature (report by Olaf Rogalsky) add configure option --with-man2html to allow an alternative to groff's man/html conversion. review and modify resource-settings which can be set via control sequences, etc. change passedPty from fixed-length to allocated to ensure that it is long enough to hold the -S option value (report by Ben Longbons). improve ReGIS graphics initialization (Ross Combs):
Update to 313: Various improvements to ReGIS graphics. Several minor fixes/improvements.
Update to 312: * undo change to do_select_regex() in patch #311 (reports by H Merijn Brand, Sven-Haegar Koch, Debian #762978).
Update to 311: Patch #311 - 2014/09/18 * mention xclip in manpage as an alternative workaround for copying clipboard data, noting that selectToClipboard (from patch #209) is the recommended approach (Debian #639094). * correct comparison in do_select_regex() of working position against starting column. * correct initialization for regular-expression feature of exec-selectable and insert-selectable actions (Debian #758633). * modify logic for exec-formatted and insert-formatted actions to ensure that the formatting occurs just after the selection is received (Debian #758633). * account for state of reverse-video in special case of cursor coloring (Debian #759734). * fix a sign-extension problem in ReGIS support, as well as correcting a case where ignored-characters were not really ignored (patch by Ross Combs). * Enable the "Escape Sequence" menu entry when an OSC 50 is received. Also disable it if the escape sequence specifies no font (Debian #760208). * improve fix for the fontsel menu entry from patch #304: because the recovery used the "current font", it would fail if one first selected a valid font, then an invalid font (Debian #760207). * correct an off-by-one in limit-check for ScrnLimitChar function (report by Egmont Koblinger).
Update to 310: * update package/freebsd files based on xterm #309 port. * adapt changes from Minux3.2 which ported xterm #197, to allow building on that platform both using imake as well as using the configure script. * update precompose.c based on Unicode 7.0 * build-fix for --with-Xaw3dxft option (report by Emanuel Haupt).
Update to 309: Patch #309 - 2014/07/13 * modify configure script to work around debris left by XQuartz upgrades. * modify test-package scripts to enable ReGIS graphics. * improvements/additions to ReGIS graphics, e.g., drawing text (Ross Comb). * add --with-Xaw3dxft, to link with Xaw 3d xft library (Stephen P Wall). * amend reset for cursor-shape to take into account cursorUnderline resource (report by Christian Weisgerber). * update config.guess, config.sub
Update to 308. Changes for 308 unknown; I only know that they were posted on freshcode, but that's dead. Changes in 307: This release fixes several display issues remaining from the changes to support italics.
Update to 306: fix incomplete implementation of new SGRs
Update to 305: This release reviewed/improved features reset on "hard reset" and implemented four SGRs, for completeness. There were several other minor fixes/improvements.
Update to 304: This adds experimental support for ReGIS. There are also several minor bugfixes and portability improvements.
Update to 303: 303: This release fixes a regression in validation against /etc/shells and adds a check for paths which match /etc/shells via a symbolic link. 302: This release fixes several minor bugs and adds a new command-line option to show colors as they are allocated.
Update to 301: This release adds minor bugfixes and documentation improvements.
Update to 300: 300: This release fixed a problem when running in XFCE4. 299: This release fixed an error in line drawing. 298: This release fixes several minor bugs and adds a new option "-report-fonts" to show which fonts are actually loaded.
Update to 297: This release revises and extends the DEC NRCS (national replacement character set) feature, adding several character sets and making it usable in a UTF-8 environment. There are other fixes for a few control sequences, improvements in font handling, and improvements to configurability.
Add option for toolbar mode. Thomas E. Dickey says it has hard-to-fix layout issues and slows the startup, so turn the option default off. Bump PKGREVISION for the default change from on to off.
Update to 296: modify delimiter in configure macro used to add a library after a given library to avoid confusion with -Wl pass-through options to linker (NetBSD #48031). fix quoting in expression used to trim extra libraries from patch #295 changes (report by Thomas Klausner).
Add patch from Thomas E. Dickey to address the build problems from PR 48031 and PR 48035.
Update to 295: This release fixes a minor regression introduced by the --as-needed loader option.
Update to 294. Add desktopdb.mk. Changes: Experimental support for sixel graphics, a fix for a regression in selection, and minor improvements to performance and configurability.
Update to 293: A regression in selection was fixed. A workaround was added for icon misconfiguration in KDE 4.8 on OpenSuSE.
Update to 292: Improves configurability of openpty versus posix_openpt functions. Adds a new feature PasteControls to enable control characters (other than formatting) to be pasted. Several minor bugfixes.
Update to 291: This release fixes the special case of the #282 change for "alternateScroll" to allow the wheel-mouse to work properly in the scrollbar area.
Update to 290: Fixes an incomplete revert of a change in the previous patch, which caused incorrect display in the scrollback area.
Update to 289: This fixes several minor bugs, and also updates the wide-character width tables for Unicode 6.2.
Update to 288: This release fixes issues found by Coverity and adds other small bugfixes and code cleanup.
Update to 287: Several small bugfixes/improvements. One is a fix for the -iconic option broken in #282 when the icon pixmap is configured. The other fixes are for older problems.
Update to 286: 285: This release fixes two minor bugs, improves recovery from misconfigured colors, and adds test scripts for building the FreeBSD port and for demonstrating OSC 4 color-queries. 286: This release fixes four bugs, chiefly a workaround for a bug in GDM exposed by the change in patch #282 that identifies the window manager. The other fixes add a check for misconfiguration of the printerCommand resource and improve transformation of the manpage to other formats.
Update to 284: Fixes bugs reported with the #283 release (regression in the --regex configure option and undesirable interaction with existing iconName behavior).
Update to 283: This release adds further improvements for icon configurability and cleanup of the configure script to remove obsolete checks.
Update to 282: Several bugfixes and new features, including new escape sequences and a new icon.
Update to 281: 281: This release fixes two regressions in patch #280 (one affects packaging, the other keyboard). 280: This release changes the default emulation level to VT420 (reflecting implementation of margins in patch #279), adds/modifies configure script options to support icon-themes, and includes several minor bugfixes and other feature enhancements.
Update to 279. Patch #279 - 2012/05/10 fill in missing cases in the save/restore modes feature (report by Thomas Wolff). add check to ensure that combining characters are precomposed in the order given (report/analysis by Andries E Brouwer). improve workability check for posix_openpt(), to take into account BSD systems which do not complete initialization until both sides of the pseudoterminal are opened (report by Christian Weisgerber). amend fix for Debian #650291 in patch #277 changes to account for different data returned by vnc4server (Debian #670638). add check in DECCRA operation to make copies of blinking text also blink by updating a line-level flag. modify rectangle operations to work with DECOM. modify DECSERA to use the current protected state rather than preserving it. add precompose resource to allow storing character data in Normalized Form D as described in http://unicode.org/reports/tr15/ (report/discussion with Andries E Brouwer). modify CBT, other ISO-6429 controls which are used by VT520 to work with DECOM. add HPR and VPR controls, ISO 6429 cursor movement used in VT520. remove "linux" restriction for IUTF8 ifdef in main.c (prompted by Matthew Dempsky posting on mailing.openbsd.tech). implement the remaining VT420-level device status reports. change DECXCPR to return page 1, rather than 0. improve VT-level checks on reporting functions, such as DECXCPR. change limit on decTerminalID to 525. fixes to improve vttest vt52 screen when running as a VT420: add checks for some VT2xx and up controls for consistency: DECSCL, S1C8T, S1C7T. modify DECRQSS return for DECSCL to only return that when running as VT2xx and up. when exiting from VT52-mode, resume in VT100 level rather than the level before starting VT52-mode. implement DECLRMM, DECSLRMM and DECNCSM (prompted by discussions with Ailin Nemui and Paul LeoNerd Evans). This modifies several controls to obey top/bottom and left/right margins. correct macro definition used for testing modes used in ANSI/DEC request-mode controls introduced in patch #262. modify x_getlogin to check $LOGNAME and $USER before fallback to getlogin, so that user's choice for these variables can be carried forward to the xterm process (Debian #611487). document DECSCUSR response for DECRQSS in ctlseqs.ms add zIconTitleFormat resource to allow customizing the "*** " prefixed to the icon title when the zIconBeep feature is activated (request by Thomas Adam). modify DECSCUSR to update the same internal variable as RM/SM 12, and document in manpage the two variables used for controlling blinking cursor (report by Paul LeoNerd Evans). correct response data for DECSCUSR in reply for DECRQSS response, which had inverted the blink-value (reports by Ailin Nemui, Paul LeoNerd Evans). add a null-pointer check in OkPasswd macro to fix a problem in resize with Fedora 17 and a serial console (report/patch by Daniel Drake). add workaround for Mac OS X, which loses the window size of a pseudo-terminal when the tty device is opened (report/analysis by Egmont Koblinger). updated configure check for workable posix_openpt versus grantpt, from luit fixes. modify DECIC/DECDC/DECBI/DECFI implemented in patch #277 to enable them only in VT4xx mode and up (report by Ailin Nemui). update config.guess, config.sub Patch #278 - 2012/01/18 correct initialization for eightBitMeta resource (FreeBSD #164101). make special check for Darwin 9 (and lower) to not use posix_openpt (report by Christian Ebert). minor fixes (adding ".ne" directives) to reduce the cases where groff's utility for generating images for tables dumps core. Most versions of groff (I've found 1.19.2 to be the most stable) dump core when attempting to report that there are too few lines on a page for a table to be shown. Patch #277 - 2012/01/07 remove special case for ISC pseudo-terminals which attempts to open the pty in two different ways. move call to grantpt before asking utempter to add a record, to work with kFreeBSD which does not update the terminal's ownership until this point (Debian #652907). document limitation of XIM interface in manpage (Debian #230787). cleanup error reporting with new xtermWarning function. add configure option --disable-selection-ops to make the new actions optional. add four new actions for making the selection or data directly copied from the screen (prompted by discussion in Debian #637001, as well as report by Arjen van Tol): exec-formatted exec-selectable insert-formatted insert-selectable add visualBellLine resource to allow visualBell to flash only the current line (prompted by patch by Gertjan Halkes). add eightBitMeta resource to control the features which modify or interpret the eighth bit of a key when the meta modifier key is pressed (prompted by Debian #326200). improve discussion of eightBitInput in the manpage (prompted by Debian #326200). correct logic for alt-sends-escape action, overlooked when implementing altSendsEscape resource, which still used eightBitInput resource value. add a workaround for XAllocColor(), which does not actually allocate "a read-only colormap entry corresponding to the closest RGB value supported by the hardware", but rather a rough approximation (Debian #650291). undo parameter checks for RequestResize() added in patch #251 and amended in patch #270, because zeros also are special cases (report by John S Urban). modify some test-scripts to use /bin/echo rather than the shell's possibly-builtin echo, to work around broken configuration on Mac OS X, i.e., neither honoring the option nor flagging an error. add SGR 1006, as a better technical solution than SGR 1015: the responses will not be confused with line-deletion and scrolling controls. the button encoding is a little simpler, since it does not add an unnecessary 32 because the integer parameter does not have to be represented as a printable character. the control responses for pressing and releasing a mouse button differ, allowing an application to tell which button was released. Besides these improvements, in discussion, it was noted that urxvt's implementation of 1005 is incorrect, relying upon a locale that provides UTF-8 encoding. In contrast, vttest demonstrates a correct decoding, independent of locale. add support for urxvt SGR 1015 to address shortcoming of SGR 1005 with luit (patch by Egmont Koblinger). add ISO and DEC controls useful for left/right scrolling. add some changes for OpenBSD and MirBSD (adapted from patch by Thorsten Glaser): disable search for non-Unix96 ptys. fix a gcc warning in timestamp_filename modify Imakefile to install xterm setgid to utmp. add/use/prefer posix_openpt() for opening pseudo-terminal. modify special errno handling case in ptydata.c from patch #158 to allow for the possibility that any platform may have special cases where "/dev/tty" is absent. For example, this can happen in a FreeBSD jail (patch by David Wolfskill). add keyboard logic to map shift-tab into XK_ISO_Left_Tab, which is usually, not always, done by the X keyboard configuration. portability fixes for some configure macros: CF_XOPEN_SOURCE Patch #276 - 2011/10/10 modify clipping limits for TrueType fonts to account for the scaleHeight resource setting, to work around another problem due to recent FreeType changes. In this case, the DejaVu Sans Mono set to pixelsize=13.5 is truncated because the font descent is reduced by FreeType to match an incorrect height metric (report by Adam Lee). improve recovery when bitmap fonts are not installed, e.g., so that switching font-sizes works for TrueType fonts. modify lookup for XTERM_SHELL feature to allow relative pathnames. modify abbreviation disambiguation check for command-line parameters to account for -geometry, whose parameter may begin with "+" or "-" (report by Scott Bertilson). Patch #275 - 2011/09/11 add ash, zsh to known shells for resize. modify resize to reuse the logic from xterm which determines the actual logon-user's shell if $SHELL is not set. revert the unsetenv("SHELL") added in patch #272. an unsetenv("SHELL") added in patch #272 to help ensure that luit would get the user's shell consistently did not work as expected for cases where multiple names are in the password-file for a given uid. That was because changes in patch #157 to handle this situation did not take into account that repeated calls to getpwnam and getpwuid return a pointer to the same static buffer. Fixed the older logic to work as intended, by ensuring that the passwd-data from each call is stored separately (report by Paul Keusemann). adjust ifdef's for putenv and unsetenv in case only one of those is provided on a given platform. correct comparison used in ExposeContains macro from patch #274 changes, to handle window-dragging (patch by Todd Eigenschink). Patch #274 - 2011/09/05 portability fixes for cygwin: do not define SVR4, and work around nonstandard header location. ifdef'd use of unsetenv from patch #273 changes to work with Solaris 9 (report by Waldemar Rachwal). modify logic for XtAppPending to merge adjacent Expose and ConfigureNotify events which are redundant (report by Edward McGuire). fix an unneeded warning message when -r option is given. remove a few redundant entries from table used for helping abbreviation-checking of command-line options, makes -geom work again after patch #272 changes as an abbreviation of -geometry. add scaleHeight resource and command-line option -sh as workaround for some font-configurations broken by changes in FreeType 2.4.6 (report by Miroslav Hodak). portability fixes for some configure macros: CF_FUNC_TGETENT, CF_XOPEN_SOURCE, CF_X_ATHENA_LIBS. add configure option --with-freetype-config to improve selection over the plethora of configuration options which freetype has so far provided. build-fix for configure --enable-load-vt-fonts when --enable-widec is not specified. build-fixes for suppressing various features, needed after changes in patches 270, 271 and 272 (report by Brian Lindholm) Patch #273 - 2011/08/25 build-fix for out-of-tree "make docs" rule. correct a typo in x_strdup, from patch #198 changes. correct initialization for -e option, broken in patch #272 changes (report by Gabriele Balducci). build-fix for out-of-tree builds to address minstall script changes in patch #272 (patch by Thierry Reding). Patch #272 - 2011/08/24 document limitation of Gtk in connection with xterm's -into option, in the manpage (Ubuntu #806969). improve -into by checking for and using the size of the window within which xterm is embedded, overriding other clues. modify logic for localeFilter resource to allow that to include command-line options of luit. improve -into by checking for invalid window-id, and allowing hexadecimal/decimal/octal values. improve keepSelection, adding the case where the highlighting is cleared, overlooked in patch #230 (patch by Marco Peereboom). improve command-line parsing to make abbreviate options work consistently across xterm-specific versus standard X toolkit options, and report cases where an abbreviated option happens to be ambiguous. In particular, -d now works as an abbreviation for -display. fix regression in command-line parsing introduced in patch #271 changes for Debian #629358, (Debian #637910). split-out new termcap/terminfo building block xterm+kbs for configurability. modify terminfo file to reflect changes in ncurses for xterm-16color and xterm-256color. modify minstall.sh, etc., to reflect the default default class, $TERM and decTerminalID values. reword resize manpage to reflect the fact that $TERMCAP is not set on all systems (patch by Alan Coopersmith). work around combined Xaw6/Xaw7 package in DragonFlyBSD which omits the usual symbolic link to the preferred library name. further improve build-fix for termcap systems by checking for some which are only partial implementations, e.g., termcap 2.08 in CentOS 5.2 Patch #271 - 2011/07/14 omit permissions adjustments to pty on exit except for pre-Unix98 ptys, since modern implementations handle this (report by Sean C Farley). modify logic for switching fonts between UTF-8 and non-UTF-8 encoding to not merge the derivable bold-, wide- and widebold values from the VT100 fonts. Also suppress warning when not using UTF-8 fonts if wide- and widebold-fonts cannot be derived or otherwise loaded (report by Werner Scheinast). modify menu-creation to suppress entries which will never be used in the current configuration, rather than simply disabling them. add resource printModeImmediate and menu item to allow print of screen plus saved lines to a file. add menu item to allow runtime enable/disable of the printFileOnXError feature. append a timestamp to filename used in printFileOnXError feature, and restrict its permissions (request by Vincent Lefevre). add a check when cancelling cursor-blinking, in case the cursor is blinked off. Fix so that the cursor is repainted without waiting for other events, e.g., keypress (report by Ailin Nemui). add configure --with-app-class option, to simplify building "xterm-dev" packages with filenames that do not conflict with conventional "xterm" packages. corrected logic flow for DECSCL, which prevented the updated operating level from being reported via DECRQSS (report by Ailin Nemui). corrected default for brokenStringTerm resource to match manpage. add vttests/dynamic.pl add runtime check for locale not supported by X libraries, and fallback to XA_STRING in this case (request by Bryan Henderson). fix a special case in configure script after no FreeType libraries are found. The script was proceeding to check for a usable configuration. add xterm+tmux building block to terminfo (adapted from changes proposed by Ailin Nemui and Nicholas Marriott). improve discussion of faceName resource in manpage (adapted from suggestions by Jens Schweikhardt). correct mapping of shifted up/down cursor-keys in termcap function-keys mode, i.e., resource tcapFunctionKeys (patch by Gertjan Halkes). update AIX case in CF_XOPEN_SOURCE configure macro to add release 7.x. modify ifdef's in xterm_io.h for __hpux to force that to use the hacked SYSV support in that file. This fixes a problem with a non-blocking socket call (patch by Paul Lampert). improve filtering of desktop category scanning, to exclude XFCE. modify configure script to work with systems that have both ncurses (or other terminfo) as well as a real termcap library, e.g., Slackware (report by Andrew Watts). modify configure script to work around special case where user's environment adds compiler flags to the CC variable (prompted by report by Paul Lampert). amend change for Debian #110226 so that "-h" or "-v" options cause an exit, rather than simply printing to stdout while the window is displayed (Debian #629358). add response for DECRQSS which gives the setting for DECSCUSR. modify AllocateTermColor() to handle XtDefaultForeground and XtDefaultBackground, which are not recognized by XParseColor. For example, this fixes the use of OSC 112 when no explicit cursor color was set (report by Ailin Nemui). handle special-case of KeyPress translated to popup-menu action (Ubuntu #756273). Patch #270 - 2011/04/26 build-fix, e.g., for using imake on platforms which use the termcap library. modify utf8 resource to accept a name. mention default for fontWarnings in manpage (report by Werner Scheinast). split "UTF-8" menu entry into "UTF-8 Encoding" and "UTF-8 Fonts" (prompted by discussion with Werner Scheinast). gray-out font-menu entries when a font fails to load, e.g., a bitmap font is not installed. improve behavior when there is no app-defaults file: set the toolBar resource to false gray-out the font menu entries where no resource is found. add configure option --with-desktop-category to allow customization of the ".desktop" files. build-fix for the install-desktop makefile-rule, when the source/build directories differ (patch by Loïc Minier). add menu entry and corresponding resource which can be used to suppress all bold-fonts (discussion with Jan Engelhardt). make internal line-size value consistent with allocated sizes of character and related arrays to ensure that bulk copying of line data, e.g., in scrolling, accounts for the padding used for pointer alignment (adapted from patch by Rajesh Mandalemula, also reported by Ali Bahar). widen ifdef for screen-resizing logic from patch #176 changes to send SIGWINCH to process group to include any system supporting ioctl(*,TIOCGPGRP,*) (prompted by linux-specific patch in OpenSUSE rpm package). add printModeOnXError and printFileOnXError resources, which allow the user to specify that xterm will write the contents of its screen to a file if it is exiting due to an X error (Debian #280457). restore logic that made reverse-video apply to the scrollbar's foreground/background, broken in patch #158 (report by Bryan Ischo). amend some of the window operations parameter-checks added in patch #251 for the push/pop title feature, to allow the parameters used for window resizing to be -1's, which makes the corresponding values ignored rather than using the window's maximum width/height (report by Noah Friedman). correct order of initialization for translations vs fullscreen resources to enable a special case which omits the Alt-Enter translation when fullscreen is disabled (Debian #612978). update config.guess, config.sub Patch #269 - 2011/02/19 build-fixes for imake (report by Heiko Berges). modify autoconf macro CF_PKG_CONFIG to work with cross-compile environments (patch by Thierry Reding). modify MapToColorMode() to favor bold over underline, matching the precedence used before patch #252 (report/analysis by Nicolas George). add omitTranslation resource, which can be used to suppress the default translations for these features: fullscreen scroll-lock shift-fonts wheel-mouse make the fullscreen feature configurable (Debian #612978) add it to the configurable list disallowedWindowOps. add command-line option -fullscreen to allow the feature to be enabled at startup. add resource fullscreen to control whether the feature is active or may be enabled. modify probe_netwm_fullscreen_capability for 64-bit machines. Contrary to XGetWindowProperty manpage, that function returns 32-bit data packed as long's. eliminate copy of name resource, which was otherwise used only to give the terminal-description name for the tcap-query feature. Use the actual $TERM value instead, as derived from termName resource, etc. eliminate an old inconsistency with error messages, some used the -name option, while others used argv[0]. The latter is now used consistently. improve configure check for rpath-hack, to improve builds on systems where gcc will not search /usr/local/lib, etc. build-fix for Xaw3d configuration (report by H Merijn Brand). update config.guess, config.sub Patch #268 - 2011/02/10 fix an inconsistency of the "Enable Reverse Video" checkbox in the VT Options menu. This also removes a special case added in patch #217 which limited the effect of the reverseVideo resource (Debian #603808). amend decoding of misformed UTF-8 sequences to avoid absorbing valid characters as documented in Unicode 6.0 section 3.9 (report by Keith Winstein). do not set urgency hint when window already has focus (patch by Dimitrios Christidis). amend extended mouse-coordinate mode from patch #262 changes to include the Cb button-code, which also may be greater than 127 (report by Ailin Nemui). ensure that underline-cursor is visible when an application happens to set the background color (report by Christian Weisgerber). add feature for full-screen toggling using either Alt-Enter or a menu selection (integrated patch by Dave Simmons). add missing logic to handle reallocation of FIFO index for the "UTF-8" menu entry (report by David Holland, NetBSD #44344). add makefile rules docs-ctlseqs, docs-xterm, etc. correct typo in description of DECRPM in control sequences document (report by Ailin Nemui). Patch #267 - 2010/11/20 minor formatting changes to ctlseqs.ms to simplify a script which extracts the feature information. See the results in Comparing versions, by counting controls in the xterm FAQ. add docs-clean makefile rule. add copy-selection action (request by Timo Juhani Lindfors, Debian #588785). trim leading/trailing blanks from string used for "Selection" font-menu data. trim leading/trailing blanks from color resource values. configure script improvements: add workaround for removal of X11 dependency from Xt's package file (report by Robert Hooker). add workaround for removal of fontconfig dependency from Xft's package file (report by Jeremy Huddleston). add workaround for removal of Xmu dependency from Xaw's package file (report by Jeremy Huddleston). improve workaround in CF_X_TOOLKIT macro, checking for other possible packages where Xt's dependencies may be given. prefer ${name:=value} to ${name-value}, since recent bash changes break legacy support for that feature. Patch #266 - 2010/10/24 add rpm and dpkg scripts, for testing. more fixes for Debian #600707 (report by Cyril Brulebois). Patch #265 - 2010/10/22 fix a regression in fontname logic from patch #263 changes (Debian #600707, reported by Vincent Lefevre). revert modification of any-event/any-button protocol from patch #263 changes. It interferes with selection using a shifted mouse button (reports by Neil Bird, Bram Moolenaar). Patch #264 - 2010/10/14 replace a null-pointer check with check for empty string in xtermOpenFont, to eliminate a warning message from patch #263 changes. build-fix for patch #263 when toolbar is not configured (patch by Chris Clayton) (reports by Robby Workman, David Wood). Patch #263 - 2010/10/13 corrected initialization of "misc" resource values, to ensure that xterm has allocated a copy of strings which may not have been malloc'd by the X library (Debian #600129). modify handling of any-event/any-button mouse protocol; it now is active with any combination of key-modifiers. add debugging feature showWrapMarks, which marks lines which xterm knows are wrapped, showing where a double-click will select past the end of a line. build-fix to address change in include-guards for Xlib.h in ongoing Xorg edits (patch by Jeremy Huddleston). improve pointerMode by continuing to watch for motion events after mouse tracking is disabled if the pointer is hidden (Debian #594856). further extend initialization for active-icon font to check if the font was not loaded succesfully, to retry with font1, or as even (if TrueType fonts are used) to use a TrueType font. The retries are to help with cases as in patch #241 where the bitmap fonts are not available. fix special case of active-icon used when TrueType font is specified for the xterm window, from patch #261 change. In that case, the default font's size was used for layout of the active icon's window (Debian #591265). Patch #262 - 2010/8/30 fix a case where changing the cursor color via escape sequences did not immediately update the screen (report by Andreas Wagner). implement ANSI and DEC request-mode control sequences. The latter includes the xterm-specific private modes such as the mouse mode. The feature is ifdef'd with the rectangle operations since its decoding overlaps that feature. correct typo in ctlseqs.ms for response of OSC 21 (patch by Kevin Schoedel). improve discussion of mouse tracking in ctlseqs.ms increase an array limit used in reporting mouse events (report by Ryan Johnson). add extended mouse-coordinates mode, allowing up to 2015x2015 windows, using UTF-8 encoding (patch by Ryan Johnson). modify manpage hyphens to conform with Debian. Patch #261 - 2010/6/28 fix regression in renderFont logic, from patch #260 changes (report by Joseph Quinsey). Patch #260 - 2010/6/20 modify plink.sh to work around problem linking to recent PCRE libraries. extend renderFont resource to allow deferred switch to TrueType fonts without affecting existing resource settings (Debian #585620). modify configure macro CF_X_TOOLKIT to work around omission of ICE library from ".pc" file (report by Miroslav Lichvar). change configure script default for --enable-broken-st i.e., the brokenStringTerm feature) to normally enable it. If the corresponding resource is enabled, this feature eliminates an apparent freeze of xterm when sending mis-encoded data to the screen (Debian #584801). document in manpage some actions which were overlooked: readline-button scroll-lock set-8-bit-control undo a change to limit-check in ScrnRefresh in patch #257, which broke fastScroll feature (Debian #584841). modify handling of brokenLinuxOSC and brokenStringTerm to also sound the bell. add control/D and control/Q to controls which will cause early exit from control string per brokenStringTerm resource. improve documentation of brokenStringTerm resource in manpage.
Fix fallout from include guard changes in libX11
update to 259 changes: -build system changes (uses pkg-config) -minor fixes -manpage improvements
update to 255 changes: many bugfixes, minor improvements
update to 248 changes: minor bugfixes
Update xterm to Patch#246. Patch #246 - 2009/8/16 * remove obsolete logic for saving/restoring wrapping flags, which did not work on 64-bit platform. Wrapping flags (stored in the line-index) are now copied with line-data (Debian #541160). * modify comments in app-defaults files to avoid problem with C preprocessor used by xrdb (Debian #541603). * restore special case in makeColorPair, needed for colorBDMode resource (Debian #541089). * correct SetLineFlags() macro, broken in patch #244 when recoding to avoid gcc-specific bitfields (Debian #541236). * modify initialization of screen buffers to ensure that pointers align to int-boundaries. This fixes a problem introduced in patch #244 where the color- and character-arrays (stored after the video-attributes in each row) might be misaligned (report by Rajeev V Pillai). * add limit-check in ScrnRefresh for handling saved-lines from the circular buffer which are repainted on a screen whose width has increased. To improve performance, circular buffer entries are not resized (report by Rajeev V Pillai). * correct type for CellColor (a late change in patch #244 to avoid gcc- specifc enums made that unsigned rather than unsigned short, for the 256-color option). * fix typo in configure option --enable-16bit-chars (report by Rajeev V. Pillai). Patch #245 - 2009/8/12 * correct a special case in saving FIFO-lines from patch #244. If the screen was shrunk, xterm used the wrong amount for copying to FIFO-lines, and then used this amount to adjust the current row on the screen. That was both a visible defect (Debian #541109) as well as a potential addressing error (Debian #541132, #541160, and #541236). * add clarification in xterm manual about the various allowXXXOps resources, which are disabled when the allowSendEvents resource is active (patch by Julien Cristau, Debian #531597). Patch #244 - 2009/8/9 * refactored storage of saved-lines, providing a configure option to manage them as a FIFO (actually a circular buffer), improving performance. Added configure option --enable-fifo-lines to enable/disable the new feature (it is enabled by default). * added fastScroll resource, to amuse people who measure terminal emulator performance by cat'ing large files to the screen. * modify check in readPtyData from return values to provide exit on zero- bytes read from pty for FreeBSD, or eliminate high-CPU in "xterm-hold" processing (discussion with Ulrich Spoerlein, FreeBSD ports/136686). The check was originally modified to combine negative/zero values in XFree86-3.1.2E, 1996/05/06. * add configure option --enable-16bit-chars to provide wide-characters with 16-bits (rather than the default 32-bits). * add retryInputMethod resource to allow configuring out the retries xterm uses to connect to non-responsive XIM server, to work around defective X configurations as noted in NetBSD mailing list. http://mail-index.netbsd.org/tech-x11/2009/06/07/msg000511.html * make regular-expression selection work for VT100 double-sized characters. * improve layout when drawing missing characters in a proportional font, e.g., as boxes, to take into account whether they are double-width (report by Guilbert Stabilo on comp.unix.shell). * add capability for keypad-center (kb2/KA2) to termcap entry for xterm-new, as well as xterm-8bit, xterm-sun and xterm-vt220 (FreeBSD conf/136336). * change default for keepSelection resource to true (prompted by discussion with David Muir Sharnoff). * remove a limit-check in ptydata.c, allowing Unicode values past 64k to be displayed using TrueType fonts (Debian #458432). * remove a vt52-specific ifdef to allow mapping F1-F4 to PF1-PF4 when vt52 support is not compiled (report by Olaf 'Rhialto' Seibert). * save/restore line-wrapping flags when converting from ISO-8859-1 encoding to UTF-8 encoding, as well as when resizing screen. * remove extra adjustment of position in fix for Debian #418324. * modify default check for mkWidth resource to check for line-drawing characters, which are categorized as double-width in Solaris 10 (report by Sebastian Kayser). * add "print-everything" action (patch by Ovidiu Gheorghioiu). * start refactoring scrollback data using new getLineData() function. * demote recent change to Debian #252873 fix to experimental, ifdef'd out as EXP_BOGUS_FG (Debian #522141). * work around groff mapping of ASCII quotes using macros (requested by Reuben Thomas based on Colin Watson advice, fixes Debian #378700). * correct symbol used for default of allowWindowOps which was DEF_ALLOW_FONT rather than DEF_ALLOW_WINDOW (report by Matthieu Herrb). * amend fix for tek4014 from patch #243 to make it only apply to the Tek Options menu.
Update to xterm-243. Patch #243 - 2009/3/28 * revert change to default for allowTcapOps (request by Bram Moolenaar). * reallocate result returned by xtermEnvLocale() to avoid reference to freed memory after handling menuLocale resource. * fix an old (X11R5) bug in tek4014 for switching fontsizes. * add resource defaultString to make configurable the use of "#" when pastes of UTF-8 text fail due to limitations in the current locale settings. * make the set of selection target Atom's configurable by two new resources eightBitSelectTypes and utf8SelectTypes, e.g., to use the TEXT Atom in preference to UTF8_STRING (discussion with Stanislav Sedov regarding koi8rxterm and the FreeBSD port). * modify handling of TARGETS Atom by making it return exactly the set of targets as those which xterm is currently providing. * set MANPAGER and PAGER explicitly to /bin/cat in minstall.sh to work around /etc/man.conf's with those variables already set * improve error-checking of tcap-query parser. * add check for keyboard tcap), which ensures that terminal descriptions containing the same string for shifted/unshifted keys will be seen by tcap-query as only the unshifted key. (This would only happen with an incorrect terminal description). * fix conversion for input event-state to modifier-parameter which made tcap-query feature not work with tcapFunctionKeys (keyboard type tcap). * add "DEF_ALLOW_XXX" definitions to main.h to allow overriding the default compiled-in values for "allowxxx" resources. * remove check on bell-percentage added in patch #242, which disallowed zero/negative values (Redhat Bugzilla #487829). Patch #242 - 2009/2/15 * fix configure check for XkbBell and provide appropriate parameter for it. * fix a caching problem with double-size fonts versus reverse video that could cause core dump. * repair double-size fonts from workaround used in patch #240. * add new section to the VT Fonts menu which allows enabling or disabling the font, termcap (tcap-query), title and window operations. * add fontWarnings resource, to control whether to show warnings on failure to load a font. * improve warnings for unloadable fonts introduced in patch #240 by limiting those to the cases where a font would be specified directly by a resource setting rather than a derived fontname. * further amend fix for Debian #252873 from patch #197 to treat a blank cell which does not have both foreground and background colored as a non-colored cell. This improves a special case where the cursor is on a blank cell which had foreground color scrolled in (report by Miroslav Lichvar). Also add the same logic when hiding cursor, so the outline matches the in-focus cursor. * modify internals to reduce places PAIRED_CHARS() is used, making WriteText() and ScrnWriteText() accept IChar array, as well as providing a wrapper for drawXtermText(). * change default XIM font from "*" to "fixed" to improve startup time in zh_CN.UTF-8 locale (Mike Fabian, SuSE Bugzilla #464930). * typo in #240 log (Slava Semushin) Patch #241 - 2009/1/26 * improve checks for missing bitmap fonts, fallback to "fixed" as needed to work around broken font-packages (report by Jacek Luczak). * fix breakage from patch #240 changes for xtermAddInput() (patches by Jeff Chua, Julien Cristau). Patch #240 - 2009/1/25 * use plink.sh for linking xterm (suggested by Larry Doolittle). * add resource descriptions for input method to xterm manpage. * update configure script; consistently append to $CFLAGS rather than prepend. * add install-scripts rule to makefile, to allow koi8rxterm and uxterm scripts to be altered independently of install-bin * add -maximized command-line option and corresponding resource (prompted by alt.os.linux newsgroup comment). * modify translations of scrollbar widget using xtermAddInput() (see patch #181) to accept the actions that the vt100 widget accepts, such as shift-insert to perform a paste operation (request by Martin Zwickel). * change default for allowTcapsOpS resource to false, since it causes unexpected behavior for vim users with AltGr. * update config.guess, config.sub
Update to xterm-239. Fixes broken translation of numpad codes on 64-bit platforms.
pullup ticket #2626 - requested by tnn xterm: update package for security vulnerability revisions pulled up: pkgsrc/x11/xterm/Makefile 1.50 pkgsrc/x11/xterm/distinfo 1.28 Module Name: pkgsrc Committed By: tnn Date: Tue Jan 6 18:20:25 UTC 2009 Modified Files: pkgsrc/x11/xterm: Makefile distinfo Log Message: update to xterm-238. Closes PR pkg/40334 and fixes CVE-2008-2383.
update to xterm-238. Closes PR pkg/40334 and fixes CVE-2008-2383. Patch #238 - 2008/12/30 * update configure macro CF_XOPEN_SOURCE for AIX 6.x and Mint platforms. * reset the screen wrapping-flag at the end of ClearRight to fix an occasional case where the last character of a scrolled and wrapped line would be cleared (patch by Joe Peterson). * modify to use POSIX coding for comparing resource settings such as locale, to work with locales such as Turkish (report by M Vefa Bicakci). * turn on configure paste64 feature by default (request by Jean-Philippe Bernardy). It is runtime enabled/disabled with allowWindowOps. * turn on configure tcap-query feature by default, add resource allowTcapOps to make this runtime enabled/disabled. * make OSC 3 (change X property, from patch #110) subject to allowWindowOps resource. * make VT220 DSR responses inactive in VT100-mode. * make DECUDK feature inactive in VT100-mode. * respond to incorrectly formatted DECRQSS with a cancel. * add allowFontOps resource to allow the fontsize-switching and font query/set control sequences to be enabled/disabled (prompted by Debian #510030). * some code cleanup based on gcc 4.x -Wconversion warnings in button.c and charproc.c * modify tcap-query feature to not return data for shifted cursor-keys when the keyboard type is set to vt220, since returning the same string for shifted/unshifted keys may confuse some applications (GenToo #212546).
Update to xterm-237. This release contains a number of significant bug fixes, including the problems with resizing the terminal with certain applications (second item listed here). Patch #237 - 2008/09/14 * improve usability of TrueType fonts by making the font-size switching for shifted keypad plus/minus use the faceSize resources to determine the order of fonts (when TrueType fonts are used) rather than the bitmap fonts, since their sizes may not be in the same order (report by H Merijn Brand) * remove an optimization of ConfigureNotify events from patch #236 which seems to interfere with passing SIGWINCH to applications (GenToo #233836). * modify handling of altSendsEscape to reset the eightBitInput mode, like metaSendsEscape (patch by Ted Phelps). * add feature to show the text-cursor as an underline rather than a box, plus command-line options -uc and +uc and resource cursorUnderLine to control the feature (patch by Paul Lampert). * update config.guess, config.sub
Update to xterm-236. Changes: Patch #236 - 2008/07/27 * correct memory reallocation when handling a paste of UTF-8 text from patch #225 changes (report/patch by Max Mikhanosha). * correct allocation of temporary buffer in xtermFindShell in case the user's $PATH contains no ":" (report/analysis by Victor Stinner, Freedesktop.Org Bugzilla #16790). * modify CF_XOPEN_SOURCE to add case for DragonFly BSD, to fix new compile problem exposed by fix for fd_mask (patch by Hasso Tepper). * add configure-check for ncurses use_extended_names, (report by Martin Mokrejs). * correct computation for toolbar height; layout manager already takes into account borderWidth resource. * implement VT320-style SCS (select character set) for ISO Latin-1 supplemental. * fixes for vt100-style character sets in UTF-8 mode (Ubuntu #230919). * fix to make luit work with xterm's -ls option (report/patch by Marius Tolzmann). * update config.guess, config.sub
Fix build failure on DragonFly, treat DragonFly same as FreeBSD. Patch provided by Hasso Tepper in PR 39048.
Update to xterm-235. Changes within pkgsrc: - Remove most options, as I see no reason not just to build them in by default (they shouldn't be intrusive). I also enabled a few features that weren't there before (mouse support for readline applications, support for the mini/built-in luit, paste64, etc.). - Build-in the toolbar by default. I patched xterm to disable the toolBar resource by default. - Include xaw.buildlink3.mk instead of libXaw/buildlink3.mk and add some code to configure xterm properly according to the user's preference. - Use @unexec ${RMDIR} ... when attempting to remove lib/X11/app-defaults. - Install xterm.desktop and uxterm.desktop to share/applications (I don't think this needs desktopdb.mk). - Added a 'debug' option which builds in support for event tracing. Also, if PKG_DEVELOPER=yes, tell configure to --enable-warnings. Patch #235 - 2008/04/20 * add control sequences for some of the recent resource/menu settings: * altSendsEscape (private mode 1039) * keepSelection (private mode 1040) * selectToClipboard (private mode 1041) * bellIsUrgent (private mode 1042) * popOnBell (private mode 1043) * add resource formatOtherKeys to provide an alternate escape sequence format for the modifyOtherKeys resource (request by Paul LeoNerd Evans). * adjust saved-cursor position if the window is resized while displaying the alternate screen (Novell #196880, Debian #383384). * improve pointer-checks to fix a bug exposed by resizing during initialization under StumpWM window manager (Fedora Bugzilla #437928). * modify unselectwindow() to ensure that the mouse pointer is not hidden after xterm loses focus (report by Jeremy Huddleston). * add special check for fd_mask on Mac OS X (report by Jeremy Huddleston). * add dylib to autoconf's suffix list used for checking the result from xmkmf, to work with Mac OS X (report by Jeremy Huddleston). * correct initialization of bold- and wide-, wide-bold fonts which may be set via the utf8Fonts subresource (Debian #347790). Patch #234 - 2008/03/02 * modify sinstall.sh to use POSIX locale to bypass GNU ls changes to date-format. * improved/refined changes for closing bitmap font (patch by Andrea Odetti). * improve resize computation for situations where the negotiation fails, by invoking the xterm widget's core-class resize method (Debian #365602, patch by Jim Paris). * restore initialization of terminal's VMIN and VTIME settings, from patch #232 changes (patch by Matthieu Herrb). Patch #233 - 2008/02/24 * add configure check for ttydefaults.h, include if needed, e.g., for systems where defining _POSIX_C_SOURCE, etc., prevents it from being included via termios.h (prompted by comments by Robert Delius Royar and Jeremy Huddleston). * patches from Alan Coopersmith. These correspond to bug-ids on bugs.opensolaris.org 4029911 fix a typo in manpage 4045962 xterm doesn't properly set ut_syslen 4192572 left-left-right misinterpreted as triple click * minor optimization to tab-initialization (patch by Nemeth Marton). * fix a case where an incorrect font was freed during initialization from patch #232 changes (patch by Andrea Odetti). * improve comparison used in SameFont function for GC-caching (Julien Cristau). * correct macro name used for default CKILL definition to work with Mac OS X (report by Jeremy Huddleston). Patch #232 - 2008/01/30 * corrected logic in a font-cache used for reverse-video (Debian #404079). * add control sequence to alter pointerMode at runtime. * add limit-checks for rectangle operation parameters (report by Martin Pirker). * modify minstall.sh to suppress $MANPAGER and $PAGER environment variables, which may interfere with redirecting output of man to a shell variable (report/patch by Zdenek Sekera). * do not try to hide mouse pointer in the tek4014 window, fixes broken "-t" option at startup from patch #230 changes (report by Robert K. Nelson). * correct datatype used when drawing tek4014 data using xterm compiled for wide-characters, on big-endian machines (reports by Jeremy Huddleston, Harald Hanche-Olsen, Martin Costabel, Merle Reinhart). * modify to cache the font-names along with the bitmap font data, to improve comparison of fonts. * modify to allow building with configure options --disable-ansi-color and --disable-leaks (Debian #459817, report/patch by Nemeth Marton). * modify to allow building with configure options --enable-wide-chars and --disable-c1-print (Debian #459816, report/patch by Nemeth Marton). * add pointerMode resource to control whether and when the pointer cursor is hidden as the user types. * simplify initialization of ttyMode- and related characters using a table. * modify initialization-logic for stty values that correspond to ltchars structure and the BSD TIOCSLTC ioctl (susp, dsusp, rprnt flush, werase, lnext). These were reset to constants for both termios and legacy interfaces immediately after asking the system for the existing values since X11R6.1, rather than using them to provide inherited values. While the legacy interface has some constraints, e.g., on HPUX, the POSIX or termios interface should not. Your shell may reset these anyway (prompted by patch by Ed Schouten). * improve logic for hiding/displaying pointer-cursor (report by Mark Brukhartz). * add limit-checks to tabs.c, increase maximum column for setting tab-stops from 320 to 1024 (report by Nemeth Marton). * correct length, i.e., number of types of selection targets, computed by ConvertSelection() when not handling wide characters for the XA_TARGETS() case. This leaves an extra Atom on the end of the list which is not handled by Java applications. The problem was introduced in patch #151 (report by David Wood).
Update to #231. NOTE: I am going to again re-enable the xterm-toolbar option by default, as there have been some fixes with font handling. If anyone notices any problems with this, please file a PR or email the pkgsrc lists. Thanks. ChangeLog: Patch #231 - 2008/01/05 * undo change to getXtermCell() from patch #230 using PACK_PAIR macro (Debian #459014, analysis by Caetano Jimenez Carezzato). * minor documentation fixes (patch by Slava Semushin) * add makefile actions to install KOI8RXTerm app-defaults file (patch by Julien Cristau). Patch #230 - 2007/12/31 * add quietGrab resource, which when true, suppresses cursor repainting when NotifyGrab and NotifyUngrab event types are received during change of focus (request by Nicolas George). * do not treat Unicode BIDI control characters as combining characters (Debian #457634). * add koi8rxterm, from Debian. * add manpage for uxterm, from Debian (Ubuntu #128136, Debian #438645) * remove ".xpm" suffixes from Icon filenames in desktop files since it confuses some lookups following the Icon Theme Specification (report by Slava Semushin) * correct width-calculation used for adjusting proportional fonts, to work with wide-characters (Debian #441354). * fixes/improvements for double-size characters: * correct old clipping calculation which used total height of glyphs where ascent was needed. * if bold font is unavailable, fall back to normal font * adjust to "work" with Xft (which does not support double-width single-height characters). * restore reset of doublesize for a line when it is cleared, broken in patch #228. * modify logic for forceBoxChars resource when using TrueType fonts to be consistent with bitmap fonts * modify logic for forceBoxChars resource to make the "Line-Drawing Characters" menu entry use xterm's line-drawing characters even asked to draw wide line-drawing characters which are available in the font. * modify rectangle-support functions to preserve colors when filling/erasing (request by Enzo Toscano, to match WRQ Reflection behavior). * add getopt-parsing to tcapquery.pl, including feature to test the extended cursor/editing keys. * make missing double-width glyphs display as double-width (Debian #456236). * change tcap-fkeys and rectangles configure options to enable them by default. * hide the mouse pointer while user is typing (request by Rodolfo Borges). * extend configure options --enable-tcap-query and --enable-tcap-fkeys to send cursor- and editing-keypad keys modified according to the keyboard (or termcap) selection for shift, alt, control, meta. * modify kdch1 in termcap, e.g., xterm-r6 to match the terminfo file. * add -hm option to turn highlightColorMode on or off. * add highlightColorMode resource to separate the new (since patch #225) highlighting with both text- and background-colors (prompted by report/example by Thomas Wolff). * add Keep Selection menu entry to turn the keepSelection resource on/off at runtime. * add keepSelection resource, which when enabled, tells xterm to retain the X selection even after it stops highlighting it (patch by Sergey Vlasov). * extend the CSI > n sequence to allow disabling all types of modified-keys that the CSI > m sequence affects. * move include for <xtermcap.h> in resize.c to avoid redefinition of termios structure on OpenSolaris (report by Rahul Gopinathan Nair). * extend terminfo building blocks for modified editing keys to include all six keys. * synchronize terminfo with ncurses (report by Stephane Chazelas): * equate xterm-xfree86 and xterm-xf86-v44. * add ncurses extensions OTbs, AX, for termcap conversions. * make old/legacy entries such as xterm-24, xterm-65 and aliases xterms, vs100 inherit from xterm-old. * make xterm-r5 and xterm-r6 the same, ignoring historical errors in X Consortium's version. * fix an ifdef in logic for selecting regular expressions while in a narrow-character locale (Debian #449227).
Update to version #229. Too many changes to list here; please see ${WRKSRC}/xterm.log.html. Additionally, the pkgsrc-specific changes are: -- Add an "xterm-toolbar" option and add it to PKG_DEFAULT_OPTIONS. Now we may all enjoy pull-down menus. -- In the ${X11_TYPE} == "modular" case, add --disable-imake and --enable-narrowproto to CONFIGURE_ARGS. The latter fixes [possible] problems with Xaw scrollbars. -- Add USE_DIRS+=xdg-1.4 to handle newly-provided xterm pixmaps. -- Add build-time dependency on x11/libxkbfile to pull in XKB extension headers, e.g. ${X11BASE}/include/X11/extensions/XKBbells.h. The XKB bell extension should now be properly detected and supported. - Add "pcre" option, thereby supporting devel/pcre as xterm's regex library. Changes ok'd (more or less) by joerg@ and tested by me. For more detail wrt: rationale for --enable-narrowproto and/or libxkbfile dependency, please contact me.
update to 224 many minor fixes and improvements - see the changelog
Update xterm to patch 212, featuring a number of small improvements, bugfixes and portability fixes.
Update to xterm patchset 208. Changes include lastlogx support on NetBSD, portability fixes e.g. for openpty and bugfixes.
Update to 205, from maintainer. The changes are detailed at http://dickey.his.com/xterm/xterm.log.html Some of the changes include: * for FreeBSD, drop setuid privileges after startup (XFree86 Bugzilla #878, report/patch by Alexander Pohoyda) ... * improve error-reporting when chown/chmod of the pseudo-terminal fails, e.g., if a copy of xterm which was designed to work with old-style pseudo-terminals is not installed setuid or setgid (report by Jeremy C. Reed). and many others.
Update xterm to 203. Changes: - pkgsrc patches for Darwin and DragonFlyBSD were incorporated. - Many bug fixes and improvements. See http://dickey.his.com/xterm/xterm.log.html for the complete list.
Pullup ticket 592 - requested by Min Sik Kim portability fix for xterm Revisions pulled up: - pkgsrc/x11/xterm/distinfo 1.16 - pkgsrc/x11/xterm/patches/patch-ac 1.4 Module Name: pkgsrc Committed By: minskim Date: Thu Jun 30 05:05:37 UTC 2005 Modified Files: pkgsrc/x11/xterm: distinfo Added Files: pkgsrc/x11/xterm/patches: patch-ac Log Message: setpgrp(pid_t, pid_t) is not available on Darwin-8.x. Use setpgid instead.
setpgrp(pid_t, pid_t) is not available on Darwin-8.x. Use setpgid instead.
Update to 202, provided by Jeroen Ruigrok van der Werven in private mail. Add some options to the package. Changes: * add extended shift- and control-modifier cursor keys to "xterm+pcfkeys" terminfo entry to correspond to ncurses 20050430 patch. * fix a rare case where text would be written with the wrong colors because output of scrolled text would reset the colors and the new text would be written with the same colors * add environment variables $XTERM_SHELL and $XTERM_VERSION * corrected workaround for background color of menubar, which gave a too-broad expression, coloring the background of the VT100 widget unless overridden by another resource setting. * correct an error in the logic which decides when sched_yield() is run; it would occasionally hang when contending with other pseudo-terminal applications such as screen * improve resource files to show how the menubar and popup menus can be colored * modify parsing of OSC (and SOS, etc), strings so their contents are not interpreted as UTF-8. This allows non-ASCII title strings to be set, provided that the window manager complies (report by Thomas Wolff). * improved some of the built-in line-drawing glyphs. * correct color of "box" character drawn for line-drawing glyph 1 (report by Nicolas George). * improve behavior when switching to UTF-8 mode after startup so xterm will check if the current fonts are already wide (ISO10646-1). If they are not, xterm will use the utf8Fonts subresource to load appropriate fonts * modify logic for setting title-string so it applies to the current widget rather than the vt100 widget. * correct computation of width for wide characters with the invisible attribute * modify interaction between +u8 and locale resource to allow the command-line option to override the resource * ignore error in the I/O initialization that tries to set the tty to 7-bit input for the case where eightBitInput resource is false * modify command-processing to accept an optional parameter that tells xterm which shell program to use * correct logic of ReallocateBufOffsets() which did not copy the content of the old screen buffer to the proper location, making a repaint clear after switching to wide-character mode * implement the remaining pieces to make xterm allocate cells for wide-characters when the "UTF-8" menu entry is selected. Also, load the UTF-8 font when that menu entry is selected, or the escape sequence for UTF-8 mode is received
Add patch-aa and patch-ab for DragonFly support. This is from Joerg Sonnenberger via PR #30256. (I redid patch-aa and my patch sums were different too.)
Add RMD160 checksums to the SHA1 ones.
Update xterm to 200. Changes: * increase color pairs value for xterm-256color and xterm-88color to match ncurses, which has an experimental option to support this. * modify ifdef's to make AIX use termios rather than termio; the struct sizes for the two were not the same. * improve CF_WITH_IMAKE_CFLAGS configure macro script for OSMAJORVERSION and OSMINORVERSION values, e.g., for Tru64 and AIX. * modify ifdef to define USE_POSIX_TERMIOS for Darwin (patch by Min Sik Kim). * modify find_utmp() to initialize the whole utmpx struct (except ut_id), since that is needed for OSF1 4.0D to prevent an infinite loop on exit. * add configure check before adding -D_POSIX_SOURCE since some platforms predefine it, e.g., cygwin. * add simplified sed expressions in CF_IMAKE_CFLAGS configure script macro to ensure value for PROJECTROOT is quoted on Solaris, i.e., when nested \( and \) are not interpreted correctly. * correct DEC rectangle operations to reset state after completing the operations. * modify CASE_ST handling in charproc.c to ensure that the parse state is reset even if xterm is not currently processing an OSC or other string (patch by Johnny Billquist forwarded by Matthias Scheler, NetBSD xsrc/29003). * fix OS/2 build for innotek_libc (patch by David Yeo). * fix a regression from patch #197 fix for Debian #277832 which disowned the selection if it was scrolled, e.g., by the user pressing return at the bottom of the screen (Debian #291787). * move the warning/exit for missing $DISPLAY into the error handler in case -display is given, and the connect fails for some other reason.
Make xterm build on Darwin by defining USE_POSIX_TERMIOS as on other BSDs.
Update xterm to 199. Changes since 197: * instead of setting $DISPLAY, check for the unset variable and warn/exit on this condition (comments by H Merijn Brand and Bernhard R Link). * fix a typo in Imakefile from patch #198 (reports/patches by Stefan Dirsch, and Mike Castle). * add utmpDisplayId resource to allow users to control whether the display identifier (display number and screen number) are retained in the connection information recorded in utmp (discussion with Edoardo Tirtarahardja). * add bellOnReset resource to allow users to disable bell which sounds on hard reset since patch #183 changes to DECSCL (discussion with Danek Duvall). * improve $WINDOWID for configuration with toolbar by making it refer to the top-level shell rather than the parent of the current window. For that case, the parent is a form widget, which does not have a name, which made the $WINDOWID not very useful as a parameter for xwininfo (suggested by Dave Bodenstab). * fix a typo in WhichVFont() macro from patch #197 changes which broke the --disable-active-icon configuration (report by Ralf S. Engelschall). * improve some limit checks (Gentoo Bugzilla #75604). * add --disable-setuid option to configure script (Gentoo Bugzilla #76453). * add --disable-full-tgetent option to configure script, allowing one to ignore a termcap library in favor of ncurses/curses (Gentoo Bugzilla #69926). * modify configure script to choose useful warning options for Intel version 8.0 compiler. * update config.guess, config.sub * make active-icon work properly when TrueType fonts are used (Debian #286068). * correct change from patch #157 which uses getlogin() to check for an alias; the storage used for the related getpwuid() call was overwritten by the data used for comparison (patch by Per Hedeland). * correct case of SCS for character set 0 (line-drawing) to allow it to be selected into GR. * fix a file-descriptor leak (Redhat Bugzilla #139597). * modify creat_as() to only fork if xterm is actually running as setuid and/or setgid. This works around a Cygwin bug which hangs when logging is enabled and makes xterm a little faster for systems using interfaces such as utempter (report by Al Goodman). * modify Cleanup() to avoid operations such as X calls that might use unsafe functions when it is called by a signal handler (report by Michiel Boland). * fix bugs in patch #191 and in SRM changes from patch #197 that broke DECSET 38: switch to Tek4014 emulation (report by Dave Bodenstab). * fix for manpage escapes (Marc La France). * improve on IRIX-specific change for Imakefile in XFree86 CVS versus resize linking against termcap library to reflect definitions for USE_TERMCAP in resize.c
Update xterm to 197. Mainly bug fixes. See http://dickey.his.com/xterm/xterm.log.html for the complete changelog.
Use distfile with a version number in its filename (xterm-196.tgz). The previous distfile (xterm.tar.gz) was updated to the new version (197).
Use POSIX termios on Interix.
Use initgroups(3) only when it is available.
Add patch missed in the previous commit, which replaces setpgrp with setpgid when setpgrp is not available.
Use setpgid(3) if setpgrp(3) is not available (e.g. on Interix).
Update xterm to 196. Changes since 188: - Many bug fixes and enhancements. See the following web page for the complete list. http://dickey.his.com/xterm/xterm.log.html
Updated xterm to 188. Package changes: - use buildlink3. - use GNU configure instead of imake. - use official MASTER_SITE. - external Xpoll.h no longer needed. - remove ONLY_FOR_PLATFORM. Major changes since 164 are lengthy and can be found at: http://invisible-island.net/xterm/xterm.log.html
Import new Solaris only "xterm" package: Latest terminal emulator for the X Window System
Initial revision