CVS log for pkgsrc/x11/xcursor/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / x11 / xcursor

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

x11: adapt to new avoid-duplicate.mk usage

xcursor: fix builtin name

x11: Add avoid-duplicate.mk to Xorg library packages

all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.

Follow some redirects.

Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

The package supports installation to DESTDIR.

Whitespace cleanup, courtesy of pkglint.
Patch provided by Sergey Svishchev in private mail.

Mechanically replace all includes of buildlink3.mk of the following
packages with the modular Xorg equivalent. Those are falling back
to the old location by default, so this commmit doesn't change
dependencies.

graphics/xpm ==> x11/libXpm
fonts/Xft2 ==> x11/libXft
x11/Xfixes ==> x11/libXfixes
x11/xcursor ==> x11/libXcursor
x11/Xrender ==> x11/libXrender
x11/Xrandr ==> libXrandr

Over 1200 files touched but no revisions bumped :)

RECOMMENDED is removed. It becomes ABI_DEPENDS.

BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.

BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.

BUILDLINK_DEPENDS does not change.

IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".

Added to obsolete.mk checking for IGNORE_RECOMMENDED.

I did not manually go through and fix any aesthetic tab/spacing issues.

I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.

I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.

As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.

As discussed on tech-pkg.

I will commit to revbump, pkglint, pkg_install, createbuildlink separately.

Note that if you use wip, it will fail!  I will commit to pkgsrc-wip
later (within day).

Add conflicts for libXcursor.

libXcursor will be imported and this package will be removed.
(libXcursor is the official distname of this package too.)

Bump PKGREVISION.

Point MAINTAINER to pkgsrc-users@NetBSD.org in the case where no
developer is officially maintaining the package.

The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list).  Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.

Recursive revision bump / recommended bump for gettext ABI change.

Fix MASTER_SITES as the old site does not exist anymore.
This is from Leonard Schmidt via tech-pkg.

Remove the abuse of buildlink that was pkg-config/buildlink3.mk.  That
file's sole purpose was to provide a dependency on pkg-config and set
some environment variables.  Instead, turn pkg-config into a "tool"
in the tools framework, where the pkg-config wrapper automatically
adds PKG_CONFIG_LIBDIR to the environment before invoking the real
pkg-config.

For all package Makefiles that included pkg-config/buildlink3.mk, remove
that inclusion and replace it with USE_TOOLS+=pkg-config.

Change path from devel/pkgconfig to devel/pkg-config.
No PKGREVISION bump since pkg-config is only a BUILD_DEPENDS.

Massive cleanup of buildlink3.mk and builtin.mk files in pkgsrc.
Several changes are involved since they are all interrelated.  These
changes affect about 1000 files.

The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk.  bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files.  Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred.  This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.

The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages.  Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc.  This modification is a nod toward LOCALBASE=/usr.  The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.

The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc.  The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.

The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files.  Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories.  These files are used as input
to imake since imake can't use stdin for that purpose.

The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead.  This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed.  Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries.  Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Update to 1.1.2:
2004-01-17  Daniel Stone
	* Xcursor.h:
	* configure.ac:
	Bump package version to 1.1.2, slated for first fd.o platform release.

2004-01-15  Harold L Hunt II
	* Makefile.am: Pass -no-undefined to libtool via LDFLAGS.

2003-11-10  Keith Packard

	* library.c: (_XcursorBuildThemeDir):
	Make sure the allocated path has space for directory separators

Libtool fix for PR pkg/26633, and other issues.  Update libtool to 1.5.10
in the process.  (More information on tech-pkg.)

Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.

Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.

fix path in MASTER_SITES.

Drop maintainership; I don't have the enough free time to maintain
all these packages.

Enable pkgviews installation.

Append to BUILDLINK_DEPENDS.<pkg>, don't set it.

bl3ify

Require Xrender>=0.8.
Bump PKGREVISION.

PKGCONFIG_OVERRIDE is relative to WRKSRC.

LIBTOOL_OVERRIDE and SHLIBTOOL_OVERRIDE are now lists of shell globs
relative to ${WRKSRC}.  Remove redundant LIBTOOL_OVERRIDE settings that
are automatically handled by the default setting in bsd.pkg.mk.

initial import of xcursor 1.1.1
based upon the pkgsrc-wip pkg by xtraeme@

This package, libXcursor, provides the client-side cursor loading
library for X.  This cursor management library is a simple library
designed to help locate and load cursors (from files or memory).

This is part of the X Libraries and Protocol Headers Project hosted
at freedesktop.org.

Initial revision