CVS log for pkgsrc/x11/openmotif/Attic/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / x11 / openmotif

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Retire x11/openmotif.

Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.

Needs libiconv to build on FreeBSD.
Bump revision as precaution.

Bump PKGREVISION for libXft changes for NetBSD native X support on
NetBSD 6, requested by tron.

Try to fix the fallout caused by the fix for PR pkg/47882. Part 3:

Recursively bump package revisions again after the "freetype2" and
"fontconfig" handling was fixed.

Bump freetype2 and fontconfig dependencies to current pkgsrc versions,
to address issues with NetBSD-6(and earlier)'s fontconfig not being
new enough for pango.

While doing that, also bump freetype2 dependency to current pkgsrc
version.

Suggested by tron in PR 47882

'Please use ${ECHO} instead of "echo".'
'Please use ${ECHO_N} instead of "echo -n".'

Recursive bump for png-1.6.

Revbump after graphics/jpeg and textproc/icu

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Remove xextproto/buildlink3.mk in most cases where it occurs with
libXext/buildlink3.mk, now that it is included there.
Leave the places where its API version is set or variables from it
are used directly (about 3 packages).

Fix build on SunOS.

build w/o libXp, bump PKGREV

update to 2.3.3
changes: bugfixes

Recursive bump for graphics/freetype2 buildlink addition.

png shlib name changed for png>=1.5.0, so bump PKGREVISIONs.

Mechanically replace references to graphics/jpeg with the suitable
alternative from mk/jpeg.buildlink3.mk

This allows selection of an alternative jpeg library (namely the x86 MMX,
SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and
follows the current standard model for alternatives (fam, motif, fuse etc).

The mechanical edits were applied via the following script:

#!/bin/sh
for d in */*; do
  [ -d "$d" ] || continue
  for i in "$d/"Makefile* "$d/"*.mk; do
    case "$i" in *.orig|*"*"*) continue;; esac
    out="$d/x"
    sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \
        -e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \
        < "$i" > "$out"
    if cmp -s "$i" "$out"; then
      rm -f "$out"
    else
      echo "Edited $i"
      mv -f "$i" "$i.orig" && mv "$out" "$i"
    fi
  done
done

Bump PKGREVISION for libpng shlib name change.
Also add some patches to remove use of deprecated symbols and fix other
problems when looking for or compiling against libpng-1.4.x.

Second try at jpeg-8 recursive PKGREVISION bump.

Specify the path to X11 libraries explicitily in the configuration step.
This fixes the build under Solaris with modular X.org and shouldn't
hurt anywhere else (tested under NetBSD/amd64 5.0_STABLE with
native X.org).

Enable jpeg and png support. From Marc Balmer.

Fix build for SunOS modular x11 (PR#36132)

Move PKG_INSTALLATION_TYPES and PKG_DESTDIR_SUPPORT before bsd.prefs.mk.

Use standard location for LICENSE line (in MAINTAINER/HOMEPAGE/COMMENT
block). Uncomment some commented out LICENSE lines while here.

Bump PKGREVISION for libXaw API depends bump due to libXaw8 removal.

Needs pkg-config

The master site doesn't seem to grok passive FTP, so prefer to use HTTP.

-needs libXft to build
-don't try to @dirrm include/X11/bitmaps

update to openmotif 2.3.1

MAKE_JOBS_SAFE=no, as reported in PR 37233.

Remove building some data files that aren't used anyway.
Add cross-compilation support for the rest.

Stop messing with X11/Xmos_r.h, just replace it with a direct include
of X11/Xos_r.h and assume that has all the magic. If it is really
necessary to hack around limitations of other platforms, we can do
that later in a more specialised fashion. Bump revision.

Switch to modular buildlinks.

Fixed some pkglint warnings.

Cleanup RESTRICTED by using bsd.prefs.mk to get OPSYS where we want
it.  Vastly simplify os-checking logic.  Don't set NO_SRC_ON_FTP,
ever, following insightful comments from dillo@.

Rewrite and debug logic to check for list of open-source operating
systems.  This version is consistent with what I've been saying on
tech-pkg about defining NO_BIN_ON_FTP for non-open-source OSes, and
not defining it on NetBSD and other open source OSes.  Fix pkglint
warnings.

Remove NOT_FOR_PLATFORM for Interix; that should be for technical
issues only, not licensing.

Add LICENSE=openmotif-license because this software is non-Free.

Set RESTRICTED, and NO_*_ON_CDROM because the license has complex
terms for "commercial product offering".

If $(OPSYS) is not in
  DragonFly FreeBSD Linux NetBSD OpenBSD
set NO_*_ON_FTP, because the license only grants distribution rights
for open source operating systems.

I believe this commit will still prevent openmotif from building on
Interix without setting ACCEPTABLE_LICENSES, and should also result in
all 4 of NO_*_ON_* being set on Interix.

There's too much make code to implement NO_*_ON_FTP-on-other-than-list
(munged from bsd.pkg.mk), but I didn't see a way to make
ONLY_FOR_PLATFORM run a makefile fragment on other platforms.

Only Open Source OS's are allowed to use this -- nuke Interix via NOT_FOR_.
(Others should be here, but I don't have responsibility for those platforms.)

Add flex as tool.

Removed the superfluous "quotes" and 'quotes' from variables that don't
need them, for example RESTRICTED and SUBST_MESSAGE.*.

Recursive revision bump / recommended bump for gettext ABI change.

USE_TOOLS+=, not =, says pkglint.

Pullup ticket 1008 - requested by Joerg Sonnenberger
security fix for openmotif

Revisions pulled up:
- pkgsrc/x11/openmotif/Makefile			1.40
- pkgsrc/x11/openmotif/distinfo			1.22
- pkgsrc/x11/openmotif/patches/patch-bj		1.3
- pkgsrc/x11/openmotif/patches/patch-bk		1.1

   Module Name:		pkgsrc
   Committed By:	joerg
   Date:		Sat Jan  7 21:08:12 UTC 2006

   Modified Files:
   	pkgsrc/x11/openmotif: Makefile distinfo
   Added Files:
   	pkgsrc/x11/openmotif/patches: patch-bj patch-bk

   Log Message:
   Fix a number of buffer overflows in OpenMotif's UIL implementation.
   For non-propolice systems this might be exploitable when the
   user-provided data (e.g. certain filenames) or the locale files are
   manipulated.

   Mostly-found-by: xfocus, see [xfocus-SD-051202] on VulnWatch. Some
   additional cases are handled which have the same impact.
   Bump revision.

Fix a number of buffer overflows in OpenMotif's UIL implementation.
For non-propolice systems this might be exploitable when the
user-provided data (e.g. certain filenames) or the locale files are
manipulated.

Mostly-found-by: xfocus, see [xfocus-SD-051202] on VulnWatch. Some
additional cases are handled which have the same impact.
Bump revision.

Update OpenMotif to 2.2.3. Too many changes to list here, but most
importantly no more imake usage.

Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

    http://mail-index.netbsd.org/tech-pkg/2005/12/02/0034.html

Add DragonFly support (untested). Provided by Jörg Sonnenberger
in PR 30258.

While here, clean up pkglint warnings.

Massive cleanup of buildlink3.mk and builtin.mk files in pkgsrc.
Several changes are involved since they are all interrelated.  These
changes affect about 1000 files.

The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk.  bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files.  Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred.  This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.

The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages.  Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc.  This modification is a nod toward LOCALBASE=/usr.  The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.

The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc.  The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.

The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files.  Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories.  These files are used as input
to imake since imake can't use stdin for that purpose.

The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead.  This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed.  Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries.  Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.

Remove USE_TBL from pkgsrc and replace with USE_TOOLS+=tbl.

Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions:

	USE_GNU_TOOLS	-> USE_TOOLS
	awk		-> gawk
	m4		-> gm4
	make		-> gmake
	sed		-> gsed
	yacc		-> bison

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Pullup ticket 351 - requested by Lubomir Sedlacik
security fix for openmotif

Revisions pulled up:
- pkgsrc/x11/openmotif/Makefile		1.32
- pkgsrc/x11/openmotif/distinfo		1.16
- pkgsrc/x11/openmotif/patches/patch-bi	1.2


    Module Name:    pkgsrc
    Committed By:   wiz
    Date:           Thu Mar 10 16:00:32 UTC 2005

    Modified Files:
            pkgsrc/x11/openmotif: Makefile distinfo
            pkgsrc/x11/openmotif/patches: patch-bi

    Log Message:
    Add patch to fix CAN-2005-0605. Bump PKGREVISION.

Add patch to fix CAN-2005-0605. Bump PKGREVISION.

Enable pkgviews installation.

Fix vulnerabilities reported in CAN-2004-0687 and CAN-2004-0688 by
applying a patch based on ICS's patch for OpenMotif 2.2.3.

Rename ALL_TARGET to BUILD_TARGET for consistency with other *_TARGETs.
Suggested by Roland Illig, ok'd by various.

just require "tbl", not necessarily the whole groff

depend on groff and use ${TBL} for tbl,
fixes PR pkg/23010 by Jeremy C. Reed

bl3ify

Same libraries were not installed in FreeBSD, so use PLIST_SUBST to
make the precompiled package.

Move WRKSRC definition away from the first paragraph in a Makefile.

use 'test -d' for directories to improve portability (solves problem in http://mail-index.netbsd.org/tech-pkg/2003/11/19/0000.html)

Use GNU make in Linux

Add definitions for DEINSTALL_EXTRA_TMPL and INSTALL_EXTRA_TMPL if
USE_PKGINSTALL is "YES".  bsd.pkg.install.mk will no longer automatically
pick up a INSTALL/DEINSTALL script in the package directory and assume that
you want it for the corresponding *_EXTRA_TMPL variable.

improve COMMENT.

s/netbsd.org/NetBSD.org/

Use tech-pkg@ in favor of packages@ as MAINTAINER for orphaned packages.
Should anybody feel like they could be the maintainer for any of thewe packages,
please adjust.

Drop trailing whitespace.  Ok'ed by wiz.

Whitespace fix

Place WRKSRC where it belongs, to make pkglint happy; ok'ed by wiz.

Install missing header file BaseClassI.h.  Bump PKGREVISION to 2.
Requested in PR pkg/20341 by Marc Recht.

Instead of including bsd.pkg.install.mk directly in a package Makefile,
have it be automatically included by bsd.pkg.mk if USE_PKGINSTALL is set
to "YES".  This enforces the requirement that bsd.pkg.install.mk be
included at the end of a package Makefile.  Idea suggested by Julio M.
Merino Vidal <jmmv at menta.net>.

Merge changes in packages from the buildlink2 branch that have
buildlink2.mk files back into the main trunk.  This provides sufficient
buildlink2 infrastructure to start merging other packages from the
buildlink2 branch that have already been converted to use the buildlink2
framework.

Rename USE_BUILDLINK2_ONLY to USE_BUILDLINK2 for less verbosity.  Also
convert a few more packages to use the buildlink2 framework.

First pass at conversion of various packages to use the buildlink2
framework.  Add many buildlink2.mk files to add to the framework.  Please
see buildlink2.txt for more details.

Update openmotif to 2.1.30nb1.  Changes from version 2.1.30 are that we
no longer install all of the demo programs with openmotif (which are
largely just bloat), and we use bsd.pkg.install.mk to replace some of the
bloat in the package Makefile.

Copy some of the code from xpkgwedge's DEINSTALL/INSTALL scripts so that
if ${PREFIX}/lib/X11/config/host.def doesn't exist, it will be created
correctly nonetheless.

Mechanical changes to 375 files to change dependency patterns of the form
foo-* to foo-[0-9]*.  This is to cause the dependencies to match only the
packages whose base package name is "foo", and not those named "foo-bar".
A concrete example is p5-Net-* matching p5-Net-DNS as well as p5-Net.  Also
change dependency examples in Packages.txt to reflect this.

Fix OpenMotif package to not overwrite X11R6 files when installed without
xpkgwedge.  Also, OpenMotif can actually be installed into ${LOCALBASE}
if xpkgwedge is installed.  Use x11.buildlink.mk and mark as
USE_BUILDLINK_ONLY, and add a buildlink.mk file for use by other package
Makefiles.

Cleanup MKDIR usage => INSTALL_*_DIR
XXX need to teach pkglint to be more picky about this

Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.

mark as BROKEN.  this package nukes some system files (makedepend, host.def, etc).
can be marked un-BROKEN when these are fixed.

also remove $'s from around free/openbsd ID's

Farm out some set-up into a do-configure target as it's conceptually
more a configure than a patch.

Also make this really compile -- it's imake voodoo, doing different
things depending on obscure definitions in one or the other of three
dozen files.

Add conflict openmotif<->lesstif, as noted by tron@netbsd.org.

Move distfiles to separate subdir.

Initial import of OpenMotif 2.1.30. Based on the FreeBSD and OpenBSD
packages, with some adaptations to our pkg framework.

Initial revision