File: [cvs.NetBSD.org] / pkgsrc / sysutils / xentools411 / Attic / Makefile (download)
Revision 1.27, Mon May 24 19:54:21 2021 UTC (2 years, 10 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2021Q3-base, pkgsrc-2021Q3, pkgsrc-2021Q2-base, pkgsrc-2021Q2
Changes since 1.26: +2 -2
lines
*: recursive bump for perl 5.34
|
# $NetBSD: Makefile,v 1.27 2021/05/24 19:54:21 wiz Exp $
#
# VERSION is set in version.mk as it is shared with other packages
PKGREVISION= 5
.include "version.mk"
DIST_IPXE= ipxe-git-${VERSION_IPXE}.tar.gz
DIST_SUBDIR= xen411
DISTNAME= xen-${VERSION}
PKGNAME= xentools411-${VERSION}
#PKGREVISION= 5
CATEGORIES= sysutils
MASTER_SITES= https://downloads.xenproject.org/release/xen/${VERSION}/
DISTFILES= ${DISTNAME}.tar.gz
XEN_EXTFILES= http://xenbits.xensource.com/xen-extfiles/
DISTFILES+= ${DIST_IPXE}
SITES.${DIST_IPXE} += ${XEN_EXTFILES}
MAINTAINER= bouyer@NetBSD.org
HOMEPAGE= https://xenproject.org/
COMMENT= Userland Tools for Xen 4.11.x
LICENSE= gnu-gpl-v2
# XXX add version check: Xen requires dev86 >= 0.16.14
BUILD_DEPENDS+= dev86-[0-9]*:../../devel/dev86 # needed to build firmware
.if !exists(/usr/bin/iasl)
BUILD_DEPENDS+= acpica-utils-[0-9]*:../../sysutils/acpica-utils
.endif
DEPENDS+= ${PYPKGPREFIX}-curses>=0:../../devel/py-curses
PKG_SYSCONFSUBDIR= xen
ONLY_FOR_PLATFORM= Linux-2.6*-x86_64
ONLY_FOR_PLATFORM+= NetBSD-[5-9].*-x86_64
SSP_SUPPORTED= no
CONFLICTS+= libxen-[0-9]*
CONFLICTS+= xenstoretools-[0-9]*
CHECK_PORTABILITY_SKIP= tools/examples/* \
tools/qemu-xen/scripts/qemu-binfmt-conf.sh
CHECK_RELRO_SKIP= libexec/xen/boot/hvmloader
EGDIR= ${PREFIX}/share/examples/xen
MESSAGE_SUBST+= EGDIR=${EGDIR}
USE_TOOLS+= pod2man gmake pkg-config makeinfo perl bash cmake
USE_LANGUAGES= c
GNU_CONFIGURE= YES
GNU_CONFIGURE_STRICT= no # seabios is for one of the sub-configures
#CONFIGURE_ARGS+= --enable-xenapi
CONFIGURE_ARGS+= --disable-seabios
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFBASE}
MAKE_ENV+= PREFIX=${prefix:Q} WRKSRC=${WRKSRC}
MAKE_ENV+= APPEND_LIB=${LDFLAGS:Q}
MAKE_ENV+= XEN_EXAMPLES_DIR=${EGDIR}
MAKE_ENV+= MV=${MV:Q} PYTHON=${PYTHONBIN:Q} SED=${SED:Q}
MAKE_ENV+= V=YES
MAKE_ENV+= NO_WERROR=1
BUILDLINK_TRANSFORM+= rm:-Werror
PYTHON_VERSIONS_ACCEPTED= 27
PY_PATCHPLIST= yes
REPLACE_PYTHON+= tools/misc/xen-bugtool tools/misc/xen-ringwatch
REPLACE_PYTHON+= tools/misc/xencons
REPLACE_PYTHON+= tools/misc/xenpvnetboot tools/misc/xensymoops
REPLACE_PYTHON+= tools/python/scripts/convert-legacy-stream
REPLACE_PYTHON+= tools/python/scripts/verify-stream-v2
REPLACE_PYTHON+= tools/xenmon/xenmon.py tools/misc/xencov_split
REPLACE_PERL+= ../ipxe/src/util/*.pl
REPLACE_PERL+= ../ipxe/src/drivers/infiniband/qib_genbits.pl
REPLACE_PERL+= ../ipxe/src/util/get-pci-ids
REPLACE_PERL+= tools/examples/xeninfo.pl
REPLACE_PERL+= tools/firmware/rombios/makesym.perl
REPLACE_PERL+= tools/include/xen-external/bsd-sys-queue-h-seddery
REPLACE_PERL+= tools/libxl/check-libxl-api-rules
REPLACE_PERL+= tools/libxl/libxl_save_msgs_gen.pl
REPLACE_PERL+= tools/qemu-xen-traditional/*.pl
SUBST_CLASSES+= conf
SUBST_STAGE.conf= pre-configure
SUBST_FILES.conf+= docs/misc/block-scripts.txt
SUBST_SED.conf= -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g"
XEND_SCRIPTS= block vif-bridge vif-ip qemu-ifup hotplugpath.sh locking.sh
SUBST_CLASSES.NetBSD+= proc
SUBST_STAGE.proc= pre-configure
SUBST_FILES.proc+= tools/ocaml/xenstored/select.ml
SUBST_SED.proc= -e "s|/proc|/kern|g"
SUBST_CLASSES+= getopt
SUBST_STAGE.getopt= pre-configure
SUBST_MESSAGE.getopt= Fixing getopt_long_only
SUBST_FILES.getopt+= tools/fuzz/x86_instruction_emulator/afl-harness.c
SUBST_SED.getopt+= -e 's,getopt_long_only,getopt_long,'
OPSYSVARS+= PROCPATH
PROCPATH.NetBSD= /kern
PROCPATH.*= /proc
.include "../../mk/bsd.prefs.mk"
.if ${OPSYS} == "NetBSD"
MESSAGE_SRC= ${.CURDIR}/MESSAGE ${.CURDIR}/MESSAGE.NetBSD
.endif
RCD_SCRIPTS= xen-watchdog xencommons xendomains
FILES_SUBST+= RCD_INTERPRETER=${PYTHONBIN:Q}
FILES_SUBST+= PROCPATH=${PROCPATH:Q}
FILES_SUBST+= PKG_SYSCONFDIR=${PKG_SYSCONFDIR}
FILES_SUBST+= PREFIX=${PREFIX}
CONF_FILES+= ${EGDIR}/xl.conf ${PKG_SYSCONFDIR}/xl.conf
CONF_FILES+= ${EGDIR}/oxenstored.conf ${PKG_SYSCONFDIR}/oxenstored.conf
OWN_DIRS= ${PKG_SYSCONFDIR}/scripts ${VARBASE}/log/xen
.for s in ${XEND_SCRIPTS}
CONF_FILES_PERMS+= ${EGDIR}/scripts/${s} ${PKG_SYSCONFDIR}/scripts/${s} \
${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0755
.endfor
pre-build:
rm -f ${WRKSRC}/check/check_x11_devel
${CP} -f ${FILESDIR}/locking.sh ${WRKSRC}/tools/hotplug/NetBSD/
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xenstore-chmod.pod.1 |\
pod2man -n xenstore-chmod >${WRKDIR}/xenstore-chmod.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xenstore-ls.pod.1 |\
pod2man -n xenstore-ls >${WRKDIR}/xenstore-ls.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xenstore.pod.1 |\
pod2man -n xenstore >${WRKDIR}/xenstore.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xentop.pod.1 |\
pod2man -n xentop >${WRKDIR}/xentop.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xentrace.pod.8 |\
pod2man -n xentrace >${WRKDIR}/xentrace.8
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xentrace_format.pod.1 |\
pod2man -n xenstore_format >${WRKDIR}/xentrace_format.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xl.cfg.pod.5.in |\
pod2man -n xl.cfg >${WRKDIR}/xl.cfg.5
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xl.conf.pod.5 |\
pod2man -n xl.conf >${WRKDIR}/xl.conf.5
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xl.pod.1.in |\
pod2man -n xl >${WRKDIR}/xl.1
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xlcpupool.cfg.pod.5 |\
pod2man -n xlcpupool.cfg >${WRKDIR}/xlcpupool.cfg.5
${SED} -e "s,@XENDCONFDIR@,${PKG_SYSCONFDIR},g" \
${WRKSRC}/docs/man/xl-disk-configuration.pod.5 |\
pod2man -n xl-disk-configuration >${WRKDIR}/xl-disk-configuration.5
INSTALLATION_DIRS= ${EGDIR} ${PKGMANDIR}/man1 ${PKGMANDIR}/man5
INSTALLATION_DIRS+= ${PKGMANDIR}/man8 share/doc/xen
BUILD_DEFS+= VARBASE
do-build:
cd ${WRKSRC} && ${BUILD_MAKE_CMD} build-tools
do-install:
cd ${WRKSRC} && ${BUILD_MAKE_CMD} DESTDIR=${DESTDIR} install-tools
post-install:
${INSTALL_MAN} ${WRKDIR}/xenstore-chmod.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xenstore-ls.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xenstore.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xentop.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xentrace.8 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man8
${INSTALL_MAN} ${WRKDIR}/xentrace_format.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xl.cfg.5 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man5
${INSTALL_MAN} ${WRKDIR}/xl.conf.5 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man5
${INSTALL_MAN} ${WRKDIR}/xl.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
${INSTALL_MAN} ${WRKDIR}/xlcpupool.cfg.5 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man5
${INSTALL_MAN} ${WRKDIR}/xl-disk-configuration.5 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man5
.for f in \
gamd-ucode-container.txt gqemu-backends.txt \
gblock-scripts.txt gqemu-deprivilege.txt \
gconsole.txt gstubdom.txt \
gcrashdb.txt gvtd-pi.txt \
gdistro_mapping.txt gvtd.txt \
gdump-core-format.txt gvtpm-platforms.txt \
ggrant-tables.txt gxen-error-handling.txt \
gkconfig-language.txt gxenmon.txt \
gkconfig.txt gxenpaging.txt \
gkexec_and_kdump.txt gxenstore-ring.txt \
glibxl_memory.txt gxenstore.txt \
gprintk-formats.txt gxsm-flask.txt \
${INSTALL_DATA} ${WRKSRC}/docs/misc/$f ${DESTDIR}${PREFIX}/share/doc/xen
.endfor
.if (${OPSYS} == "NetBSD" && \
(empty(OS_VERSION:M6.99.[3-9]?) && empty(OS_VERSION:M[7-9].*)))
CPPFLAGS+= -Dshm_open=open -Dshm_unlink=unlink
.endif
.include "../../mk/compiler.mk"
.if !empty(PKGSRC_COMPILER:Mclang)
EXTRA_HOSTCFLAGS+= -Wno-error=ignored-attributes
EXTRA_CFLAGS+= -Wno-error=ignored-attributes -no-integrated-as \
-Wno-error=tautological-compare -Wno-error=null-dereference \
-Wno-error=empty-body -Wno-error=self-assign \
-Wno-error=sometimes-uninitialized \
-Wno-error=unused-function -Wno-error=format \
-Wno-error=unused-const-variable \
-Wno-error=gnu-designator -Wno-error=uninitialized \
-Wno-error=parentheses-equality \
-Wno-error=enum-conversion \
-Wno-error=address-of-packed-member
BUILDLINK_TRANSFORM+= rm:-falign-jumps=1 rm:-falign-loops=1 \
rm:-mpreferred-stack-boundary=2
.endif
MAKE_ENV+= EXTRA_HOSTCFLAGS=${EXTRA_HOSTCFLAGS:Q} EXTRA_CFLAGS=${EXTRA_CFLAGS:M*:Q} TARGET_CC=${TARGET_CC}
.include "../../lang/python/application.mk"
.include "../../lang/python/extension.mk"
#.include "../../devel/SDL/buildlink3.mk"
.include "../../lang/ocaml/buildlink3.mk"
.include "../../devel/ocaml-findlib/buildlink3.mk"
.include "../../sysutils/pciutils/buildlink3.mk"
.include "../../devel/glib2/buildlink3.mk"
.include "../../devel/yajl/buildlink3.mk"
.include "../../devel/argp/buildlink3.mk"
.include "../../security/libgcrypt/buildlink3.mk"
.include "../../x11/pixman/buildlink3.mk"
.include "../../mk/curses.buildlink3.mk"
.include "../../mk/bsd.pkg.mk"
![[BACK]](/icons/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / pkgsrc / sysutils / xentools411