CVS log for pkgsrc/sysutils/amanda/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / sysutils / amanda

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

systuils/amanda: Drop semi-MAINTAINERship

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Add a version.mk file with AMANDA_VERSION in it and use that in all amanda
packages (including the meta-package) and in the buildlink.

use META_PACKAGE, delete other variables

Add DESTDIR support.

Update to 2.5.2p1, provided by Nick Goffee of BBN.

[bugfixes and minor improvements omitted; see NEWS]

Changes in release 2.5.2

   * krb5 auth is working
   * Works with IPv6 address
   * Amanda configuration file changes
         o amanda.conf changes
               + debugging is enabled in the config file
                 see all debug_* config option
               + tapetype 'readblocksize', if maxtapeblocksize is set too
                 larger for your hardware
   * Amanda command changes
         o amadmin: new 'holding list' and 'holding delete' subcommand.

Changes in release 2.5.1p3

   * Works with tar-1.16 and exit status of 1.

Changes in release 2.5.1p2

   * amoverview is working
   * dumptype starttime is working

   * Amanda command changes
         o amtape accept the -o arguments
         o amgetconf --list to list all tapetype, dumptype, holdingdisk
           or interface
         o amgetconf can return a value of a specific tapetype, dumptype,
           holdingdisk or interface

Changes in release 2.5.1p1

   * Remove contrib/sst.

Changes in release 2.5.1

   * Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
   * Works with GNU tar 1.15.91 - work with new gtar state file format.
   * Open SSL encryption support
   * Two new authentication methods: bsdtcp, bsdudp.
   * Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
     authentication methods.
   * Recovery process amrecover uses Secure API. amoldrecover command
     (same syntax and functionality as amrecover command) is provided for
     compatibility with old Amanda releases. amoldrecover command uses old
     amidxtaped/amindexd protocol.
   * Amanda debug files are separated into client/server/amandad and
     are also classified based on Amanda configuration name.

   * Amanda command changes
         o amfetchdump -o is replaced by -O.
         o amcheck -w option does all tests including the tape writable test.
           Use amcheck -t -w to do only the tape writable test.
         o -o command option to override Amanda configuration. See amanda man
           page for details.
         o amgetconf command doesn't write the BUGGY message when a entry
           is not found in the configuration file.

   * Amanda configuration file changes
         o amanda.conf changes
               + amrecover_do_fsf in amanda.conf defaults to yes
               + amrecover_check_label in amanda.conf defaults to yes
               + usetimestamps in amanda.conf to support multiple
                 backup runs in a calendar day.
               + holdingdisk in amanda.conf supports new values:
                 NEVER, AUTO, REQUIRED.
               + amandad_path, client_username and ssh_keys in
                 amanda.conf for ssh/rsh authentication.
         o New amanda client configuration file - amanda-client.conf.
           Different client configuration file can be used for each Amanda
           configuration.
               + gnutar_list-dir and amandates can be specified in
                 Amanda client configuration file - amanda-client.conf
         o .amandahosts format changes to allow use of secure API for recovery.
         o Amanda service entries in xinetd configuration has changed.

Changes in release 2.5.0p1

* Add the 'amtape update' command.

Changes in release 2.5.0

* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
  and gpg encryption),  Encryption can be done on server or client,
  Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
  really useful feature especially since it can specified for a DLE.  You
  can use different compression algorithm for images, binaries, ascii files
  and so on.
* Dump images spanning multiple media volumes - Dump images are no
  longer restricted to a single media volume (tape or vtape).  Data restoration
  can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.

Change in release 2.4.5

* new displayunit global option to select the unit use to display number
  k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.

Change in release 2.4.5b1

* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
  the bumpsize is set to a fixed value which can be adequate for small
  and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
    CLIENT: estimate by the dumping program.
    CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
    SERVER: estimate based on statistic from previous run, take second but
            can be wrong on the estimate size.

* If PLIST_SRC is explicitly set to an empty value in a package Makefile,
  then automatically generate a PLIST that says "${PKGNAME} has no files".

* If PLIST_SRC and GENERATE_PLIST are not set in a package Makefile,
  and no PLIST files exist, then fail during the package build with
  PKG_FAIL_REASON.

* Remove "intentionally empty" PLISTs again.

Now, the easy way to say that a package installs no files is to just
add the following to the package Makefile:

	PLIST_SRC=	# empty

Point MAINTAINER to pkgsrc-users@NetBSD.org in the case where no
developer is officially maintaining the package.

The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list).  Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.

Recursive revision bump / recommended bump for gettext ABI change.

This is the package amanda-2.4.4.p4 so it better depends on
amanda-*-2.4.4p4* packages.

Update amanda to 2.4.4p4

Bug fix release and minor improvements:

new chg-iomega changer script.
amanda will not use a tape if it's label is not in the tapelist file.
amflush.c: Don't start a driver if nothing to flush.
amadmin.c: Call check_dumpuser() as soon as posible.
amadmin.c: Don't core dump if DUMPCYLE is too  big.
dumper.c: Parse warning message.

Fix build after amanda-common had its PKGREVISION bumped: be a bit
more liberal about the versions of the various amanda packages listed
as dependencies.

Update the amanda packages to 2.4.4p2. From Paul Shupak in pkg/24550,
with some additionnal fixes by me.

s/netbsd.org/NetBSD.org/

These don't really need X after all -- they can be useful on headless
machines without X, too, so remove USE_X11.

Use tech-pkg@ in favor of packages@ as MAINTAINER for orphaned packages.
Should anybody feel like they could be the maintainer for any of thewe packages,
please adjust.

NO_PATCH is deprecated, says pkglint. Remove it.

Upgrade to 2.4.2p2

Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.

Upgrade of the amanda packages from 2.4.1p1 to 2.4.2.

After the automatic package conflict detection has been fixed rename
this package to "amanda" again.

Update for amanda-plot.

add USE_X11=yes

Rename "amanda" package to "amanda-all" to avoid conflicts with its own
sub packages.

Move "amanda" related packages to "sysutils" category as suggested by
Klaus Klein in PR pkg/7159.

Remove the FreeBSD Id, this has nothing to do with the FreeBSD package now.

A meta-pkg for amanda, requested by Hubert Feyrer.

Now in amanda-common, amanda-server, amanda-client

GNU plot is now at v.3.7.  Depend on that version.

Reflect that addnerd has version 1.6 now, as noted in pr 6721.

Configure --with-amandahosts. This causes Amanda to use .amandahosts
files instead of .rhosts.

The Grand Homepagification:
	- New, optional Makefile variable HOMEPAGE, specifies a URL for
	  the home page of the software if it has one.
	- The value of HOMEPAGE is used to add a link from the
	  README.html files.
	- pkglint updated to know about it.  The "correct" location for
	  HOMEPAGE in the Makefile is after MAINTAINER, in that same
	  section.

Update to use USE_LIBTOOL.

Adapt to use pkg version of libtool rather than amanda's private copy.

Use automatic shared object handling

Update package Makefiles for automatic manual page handling.

Upgrade to Amanda 2.4.0p1, a bug fix release.
Invoke addnerd correctly, so that -g is processed by getopt(3)
Change the RUN_DEPENDS on gnuplot and gtar to DEPENDS - the GNU configure
script needs to find these at the configure stage of the Amanda package.

DEPEND on addnerd-1.5.
Add an AMANDA_GROUP definition, and set it to operator (necessary for
write access to certain files).
Invoke addnerd with -g ${AMANDA_GROUP}

Use addnerd, rather than a custom Perl script, to add the user.
Delete the USE_PERL5 definition.
Add --with-mmap to the Amanda configuration.

Mostly cosmetic changes to shut up portlint. Little bugfix for apache.

The best way to fix PR 4895 is to upgrade Amanda to version 2.4.0, and close
some security holes in the process.

Substitute all obvious FreeBSD ppl as MAINTAINER with packages@netbsd.org.

Use the bsd.pkg.mk and bsd.pkg.subdir.mk files in the pkgsrc tree.
Remove redundant (and sometimes erroneous) comments.

portlint: fix RCS ID, strip extra spaces at EOL, use command macros, fix CFLAGS parsing

Pre-process the source tree, to modify /usr/local to ${PREFIX}.
This is done in the pre-configure stage.

Restore original FreeBSD Id.

Add NetBSD RCS Id.

Import as of 09/25/97

Initial revision