Up to [cvs.NetBSD.org] / pkgsrc / print / ghostscript-agpl
Request diff between arbitrary revisions
Default branch: MAIN
Revision 1.49 / (download) - annotate - [select for diffs], Mon Mar 11 21:29:17 2024 UTC (5 weeks, 3 days ago) by schmonz
Branch: MAIN
CVS Tags: pkgsrc-2024Q1-base,
pkgsrc-2024Q1,
HEAD
Changes since 1.48: +2 -1
lines
Diff to previous 1.48 (colored) to selected 1.36 (colored)
ghostscript-agpl: fix macOS (with new-clang only?).
Revision 1.48 / (download) - annotate - [select for diffs], Mon Mar 11 12:45:37 2024 UTC (5 weeks, 4 days ago) by wiz
Branch: MAIN
Changes since 1.47: +4 -4
lines
Diff to previous 1.47 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 10.03.0. Version 10.03.0 (2024-03-06) Highlights in this release include: ãàA vulnerability was identified in the way Ghostscript/GhostPDL called tesseract for the OCR devices, which could allow arbitrary code execution. As as result, we strongly urge anyone including the OCR devices in their build to update as soon as possible. As of this release (10.03.0) pdfwrite creates PDF files with XRef streams and ObjStm streams. This can result in considerably smaller PDF output files. See Vector Devices for more details. Ghostscript/pdfwrite now supports passing through PDF "Optional Content". Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. Incompatible changes (10.03.0) Almost all the "internal" PostScript procedures defined during the interpreter startup are now "executeonly", further reducing the attack surface of the interpreter. The nature of these procedures means there should be no impact for legitimate usage, but it is possible it will impact uses which abuse the previous accessibility (even for legitimate reasons). Such cases may now require "DELAYBIND", See DELAYBIND (10.03.0) The "makeimagedevice" non-standard operator has been removed. It allowed low level access to the graphics library in a way that was, essentially impossible to secure. (10.03.0) The "putdeviceprops", "getdeviceprops", "finddevice", "copydevice", "findprotodevice" non-standard operators have all been removed. They provided functionality that is either accessible through standard operators, or should not be used by user PostScript. (10.03.0) The process of "tidying" the PostScript namespace should have removed only non-standard and undocumented operators. Nevertheless, it is possible that any integrations or utilities that rely on those non-standard and undocumented operators may stop working or may change behaviour. If you encounter such a case, please contact us (Discord, #ghostscript IRC channel, or the gs-devel mailing list would be best), and we'll work with you to either find an alternative solution or return the previous functionality, if there is genuinely no other option.
Revision 1.47 / (download) - annotate - [select for diffs], Fri Nov 3 09:14:16 2023 UTC (5 months, 2 weeks ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2023Q4-base,
pkgsrc-2023Q4
Changes since 1.46: +4 -4
lines
Diff to previous 1.46 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 10.02.1 Ghostscript/GhostPDL 10.02.1 Patch release to address some security bugs
Revision 1.46 / (download) - annotate - [select for diffs], Thu Oct 19 15:31:42 2023 UTC (6 months ago) by wiz
Branch: MAIN
Changes since 1.45: +4 -4
lines
Diff to previous 1.45 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 10.02.0. Version 10.02.0 (2023-08-30) Highlights in this release include: The old, PostScript based PDF interpreter has been removed, it is no longer available. We've continued to improve the performance of the PDF interpreter written in C and improve it's behaviour in edge and out-of-specification cases. Our efforts in code hygiene and maintainability continue, with a particular focus on fuzz testing. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). Mainly due to time constraints, we only support including Tesseract from source included in our release packages, and not linking to Tesseract/Leptonica shared libraries. Whether we add this capability will be largely dependent on community demand for the feature.
Revision 1.44.2.1 / (download) - annotate - [select for diffs], Sun Jul 23 08:34:35 2023 UTC (8 months, 4 weeks ago) by spz
Branch: pkgsrc-2023Q2
Changes since 1.44: +4 -4
lines
Diff to previous 1.44 (colored) next main 1.45 (colored) to selected 1.36 (colored)
Pullup ticket #6776 - requested by bsiegert print/ghostscript-agpl: security update Revisions pulled up: - print/ghostscript-agpl/Makefile 1.77 - print/ghostscript-agpl/Makefile.common 1.30 - print/ghostscript-agpl/distinfo 1.45 ------------------------------------------------------------------- Module Name: pkgsrc Committed By: adam Date: Mon Jun 26 11:27:25 UTC 2023 Modified Files: pkgsrc/print/ghostscript-agpl: Makefile Makefile.common distinfo Log Message: ghostscript-agpl: updated to 10.01.2 Version 10.01.2 (2023-06-21) Highlights in this release include: We've continued to improve the performance of the PDF interpreter written in C and improve it's behaviour in edge and out-of-specification cases. Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). To generate a diff of this commit: cvs rdiff -u -r1.76 -r1.77 pkgsrc/print/ghostscript-agpl/Makefile cvs rdiff -u -r1.29 -r1.30 pkgsrc/print/ghostscript-agpl/Makefile.common cvs rdiff -u -r1.44 -r1.45 pkgsrc/print/ghostscript-agpl/distinfo
Revision 1.45 / (download) - annotate - [select for diffs], Mon Jun 26 11:27:24 2023 UTC (9 months, 3 weeks ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2023Q3-base,
pkgsrc-2023Q3
Changes since 1.44: +4 -4
lines
Diff to previous 1.44 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 10.01.2 Version 10.01.2 (2023-06-21) Highlights in this release include: We've continued to improve the performance of the PDF interpreter written in C and improve it's behaviour in edge and out-of-specification cases. Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3).
Revision 1.44 / (download) - annotate - [select for diffs], Wed Apr 26 19:50:51 2023 UTC (11 months, 3 weeks ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2023Q2-base
Branch point for: pkgsrc-2023Q2
Changes since 1.43: +4 -4
lines
Diff to previous 1.43 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 10.01.1. Bugfix release.
Revision 1.43 / (download) - annotate - [select for diffs], Sun Apr 23 09:19:13 2023 UTC (11 months, 3 weeks ago) by wiz
Branch: MAIN
Changes since 1.42: +5 -5
lines
Diff to previous 1.42 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 10.01.0. Version 10.01.0 (2023-03-22) Highlights in this release include: We've continued to improve the performance of the PDF interpreter written in C and improve it's behaviour in edge and out-of-specification cases. Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.42 / (download) - annotate - [select for diffs], Mon Jan 16 10:41:37 2023 UTC (15 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2023Q1-base,
pkgsrc-2023Q1
Changes since 1.41: +4 -4
lines
Diff to previous 1.41 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 10.0.0 Version 10.00.0 (2022-08-18) Highlights in this release include: The big change in this release is that the old PDF interpreter (written in PostScript) is now fully deprecated. We will not be making any further changes to it. For this release, the -dNEWPDF=false option remains for "emergency" use, but the option to fall back to the old intepreter will also be removed in the next full release (10.01.0) in spring 2023. So we once again encourage all users to test the new interpreter in their use cases, and report any problems. The new PDF interpreter written in C has had several performance improvements. It was already quicker for the majority of cases than the PostScript implementation, but we found further improvements for common cases, and also several speed improvements in edge cases. Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). Mainly due to time constraints, we only support including Tesseract from source included in our release packages, and not linking to Tesseract/Leptonica shared libraries. Whether we add this capability will be largely dependent on community demand for the feature. See Enabling OCR for more details.
Revision 1.41 / (download) - annotate - [select for diffs], Fri May 27 08:26:52 2022 UTC (22 months, 3 weeks ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2022Q4-base,
pkgsrc-2022Q4,
pkgsrc-2022Q3-base,
pkgsrc-2022Q3,
pkgsrc-2022Q2-base,
pkgsrc-2022Q2
Changes since 1.40: +7 -8
lines
Diff to previous 1.40 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.56.1 9.56.1 New PDF Interpreter is now enabled by default: See Changes Coming to the PDF Interpreter libgs is now threadsafe The PSD output devices now write ICC profiles to their output files for improved color fidelity. Ghostscript/GhostPDL can now output Apple Raster and URF format image files: via the "appleraster" or "urf" output devices (using the cups implementation of those formats).
Revision 1.40 / (download) - annotate - [select for diffs], Sat Jan 22 13:51:55 2022 UTC (2 years, 2 months ago) by triaxx
Branch: MAIN
CVS Tags: pkgsrc-2022Q1-base,
pkgsrc-2022Q1
Changes since 1.39: +2 -2
lines
Diff to previous 1.39 (colored) to selected 1.36 (colored)
ghostscript-agpl: Fix build issue discussed on pkgsrc-users@ https://mail-index.netbsd.org/pkgsrc-users/2019/06/13/msg028790.html This fix has kindly been provided upstream to try solving the building errors (https://bugs.ghostscript.com/show_bug.cgi?id=704844).
Revision 1.39 / (download) - annotate - [select for diffs], Tue Oct 26 11:12:06 2021 UTC (2 years, 5 months ago) by nia
Branch: MAIN
CVS Tags: pkgsrc-2021Q4-base,
pkgsrc-2021Q4
Changes since 1.38: +2 -2
lines
Diff to previous 1.38 (colored) to selected 1.36 (colored)
print: Replace RMD160 checksums with BLAKE2s checksums All checksums have been double-checked against existing RMD160 and SHA512 hashes
Revision 1.35.4.3 / (download) - annotate - [select for diffs], Wed Oct 13 20:47:09 2021 UTC (2 years, 6 months ago) by tm
Branch: pkgsrc-2021Q3
Changes since 1.35.4.2: +5 -5
lines
Diff to previous 1.35.4.2 (colored) to branchpoint 1.35 (colored) next main 1.36 (colored)
Pullup ticket #6512 - requested by mlelstv print/ghostscript-agpl: pullup and build fix Revisions pulled up: - print/ghostscript-agpl/Makefile.common 1.25 - print/ghostscript-agpl/PLIST 1.20 - print/ghostscript-agpl/distinfo 1.37 - print/ghostscript-agpl/patches/patch-configure 1.8
Revision 1.38 / (download) - annotate - [select for diffs], Thu Oct 7 14:48:55 2021 UTC (2 years, 6 months ago) by nia
Branch: MAIN
Changes since 1.37: +1 -2
lines
Diff to previous 1.37 (colored) to selected 1.36 (colored)
print: Remove SHA1 hashes for distfiles
Revision 1.35.4.2 / (download) - annotate - [select for diffs], Tue Oct 5 21:20:57 2021 UTC (2 years, 6 months ago) by tm
Branch: pkgsrc-2021Q3
Changes since 1.35.4.1: +0 -3
lines
Diff to previous 1.35.4.1 (colored) to branchpoint 1.35 (colored) to selected 1.36 (colored)
print/ghostscript-agpl: Fix broken merge for distinfo
Revision 1.35.4.1 / (download) - annotate - [select for diffs], Tue Oct 5 19:54:29 2021 UTC (2 years, 6 months ago) by tm
Branch: pkgsrc-2021Q3
Changes since 1.35: +5 -1
lines
Diff to previous 1.35 (colored) to selected 1.36 (colored)
Pullup ticket #6500 - requested by bsiegert print/ghostscript-agpl: Bugfix, undefined reference error during link Revisions pulled up: - print/ghostscript-agpl/distinfo 1.37 - print/ghostscript-agpl/patches/patch-base_gsicc__lcms2.c 1.1 --- Module Name: pkgsrc Committed By: ryoon Date: Thu Sep 30 23:48:51 UTC 2021 Modified Files: pkgsrc/print/ghostscript-agpl: distinfo Added Files: pkgsrc/print/ghostscript-agpl/patches: patch-base_gsicc__lcms2.c Log Message: ghostscript-agpl: Fix undefined reference error during link
Revision 1.37 / (download) - annotate - [select for diffs], Thu Sep 30 23:48:51 2021 UTC (2 years, 6 months ago) by ryoon
Branch: MAIN
Changes since 1.36: +2 -2
lines
Diff to previous 1.36 (colored)
ghostscript-agpl: Fix undefined reference error during link
Revision 1.36 / (download) - annotate - [selected], Wed Sep 29 19:19:23 2021 UTC (2 years, 6 months ago) by adam
Branch: MAIN
Changes since 1.35: +7 -6
lines
Diff to previous 1.35 (colored)
ghostscript-agpl: updated to 9.55.0 Version 9.55.0 (2021-09-27) Highlights in this release include: This release includes the fix for the %pipe% security issue (CVE-2021-3781). New PDF Interpreter: This is an entirely new implementation written in C (rather than PostScript, as before). For a full discussion of this change and reasons for it see: Changes Coming to the PDF Interpreter. In this (9.55.0) release, the new PDF interpreter is disabled by default in Ghostscript, but can be used by specifying -dNEWPDF. We hope to make it the default in 9.56.0, and fully deprecate the PostScript implementation shortly after that (depending on the feedback we get). This also allows us to offer a new executable (gpdf, or gpdfwin??.exe on Windows) which is purely for PDF input. For this release, those new binaries are not included in the "install" make targets, nor in the Windows installers (they will be from 9.56.0 onwards). We would ask that as many users as possible take the opportunity to test with the new PDF implementation (i.e. using -dNEWPDF on your gs command line), and discuss any problems with us, before the new implementation becomes the default. The pdfwrite device now supports "passthrough" for JPX/JPG2000 data images (as well as the already supported JPEG/DCT Encoded). That means that if no rescaling or color conversion of the image data is required, the encoded/compressed image data from the input file will be written unchanged to the output, preventing potential image degradation caused by decompressing and recompressing. The Ghostscript/GhostPDL demo apps for C, C#, Java and Python have all had improvements and the C#/Java/Python language bindings have now been documented, see Ghostscript Language Bindings The Zugferd compliant PDF generating definitions (lib/zugferd.ps) have been updated and expanded to support the current version (2.1.1) of the Zugferd spec, and optionally different versions of the specification. The PCL/m output devices now support Duplex/Tumble. The internal support for "n-up" style simple imposition (introduced in 9.54.0) has been extended and improved for better support across all input formats. Ghostscript now supports object specific halftone - for example, different halftones can be specified for text and images, reflecting the differing needs of rendering those two types of object. Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3).
Revision 1.35 / (download) - annotate - [select for diffs], Wed Jun 9 20:20:09 2021 UTC (2 years, 10 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2021Q3-base,
pkgsrc-2021Q2-base,
pkgsrc-2021Q2
Branch point for: pkgsrc-2021Q3
Changes since 1.34: +5 -6
lines
Diff to previous 1.34 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.54.0 The 9.54.0 release is a maintenance release, and also adds new functionality. Highlights in this release include: Overprint simulation is now available to all output devices, allowing quality previewing/proofing of PostScript and PDF jobs that rely on overprint. See the -dOverprint option documentation in: Overprint The "docxwrite" device adds the ability to output to Microsoft Word "docx" format. See: docxwrite The pdfwrite device is now capable of using the Tesseract OCR engine when it is built into Ghostscript to improve searchability and copy and paste functionality when the input lacks the metadata for that purpose. See: UseOCR Ghostscript/GhostPDL now includes a "map text to black" function, where text drawn by an input job (except when drawn using a Type 3 font) can be forced to draw in solid black. See: BlackText Ghostscript/GhostPDL now supports simple N-up imposition "internally". See: NupControl Our efforts in code hygiene and maintainability continue. The usual round of bug fixes, compatibility changes, and incremental improvements. (9.53.0) We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). Mainly due to time constraints, we only support including Tesseract from source included in our release packages, and not linking to Tesseract/Leptonica shared libraries. Whether we add this capability will be largely dependent on community demand for the feature.
Revision 1.32.2.1 / (download) - annotate - [select for diffs], Fri Oct 23 11:17:44 2020 UTC (3 years, 5 months ago) by spz
Branch: pkgsrc-2020Q3
Changes since 1.32: +2 -1
lines
Diff to previous 1.32 (colored) next main 1.33 (colored) to selected 1.36 (colored)
Pullup ticket #6354 - requested by maya print/ghostscript-agpl: dependecy update triggered build fix Revisions pulled up: - print/ghostscript-agpl/Makefile patch - print/ghostscript-agpl/distinfo patch - print/ghostscript-agpl/patches/patch-base_fapi__ft.c 1.1 Make the package build with FreeType 2.10.3.
Revision 1.34 / (download) - annotate - [select for diffs], Wed Oct 21 08:28:06 2020 UTC (3 years, 5 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2021Q1-base,
pkgsrc-2021Q1,
pkgsrc-2020Q4-base,
pkgsrc-2020Q4
Changes since 1.33: +6 -5
lines
Diff to previous 1.33 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.53.3 9.53.3: A crash (or silent, erroneous exit) on 64 bit Windows and other LLP64 type environments. What appears to be a compiler optimiser bug in 64 bit Windows builds with Visual Studio 2019 A crash related to management of ICC profile objects A crash on SPARC hardware due to an alignment mismatch in the bitmap cache A parameter type mismatch that would cause Ghostcript to error out during initialisation, which affected 64 big, big endian architectures. An expected side effect of another change that prevented multithreaded rendering and background rendering from working correctly.
Revision 1.33 / (download) - annotate - [select for diffs], Tue Sep 29 14:29:42 2020 UTC (3 years, 6 months ago) by ryoon
Branch: MAIN
Changes since 1.32: +6 -6
lines
Diff to previous 1.32 (colored) to selected 1.36 (colored)
ghostscript-agpl: Update to 9.53.2 Changelog: Version 9.53.2 (2020-09-25) Highlights in this release include: The 9.53.2 release is primarily maintenance. Three issues arose with 9.53.0/1 that prompted the release of a .2 patch: A crash (or silent, erroneous exit) on 64 bit Windows and other LLP64 type environments. A parameter type mismatch that would cause Ghostcript to error out during initialisation, which affected 64 big, big endian architectures. An expected side effect of another change that prevented multithreaded rendering and background rendering from working correctly. Details of those can be found in the changelog. The most obvious change is the (re-)introduction of the patch level to the version number, this helps facilitate a revised policy on handling security related issues. To clarify: in the event we decide to release a patch revision, it will replace the release with the previous patch number. Release notes, highlights and warnings will remain the same, except for the addition of whatever fix(es) prompted the patch. Our efforts in code hygiene and maintainability continue. We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). Due to some patches to the Tesseract sources that are required (integrated upstream, but awaiting release), time constraints, and the experimental nature of the feature, we only support including Tesseract from source, not linking to Tesseract shared libraries. Whether we add this capability will be largely dependant on community demand for the feature. See Enabling OCR for more details. We have added Python bindings for the gsapi interface, can be found in demos/python. These are experimental, and we welcome feedback from interested developers. For those integrating Ghostscript/GhostPDL via the gsapi interface, we have added new capabilities to that, specifically in terms of setting and interrogating device parameters. These, along with the existing interface calls, are documented in: Ghostscript Interpreter API IMPORTANT: In consultation with a representative of (OpenPrinting) it is our intention to deprecate and, in the not distant future, remove the OpenPrinting Vector/Raster Printer Drivers (that is, the opvp and oprp devices). If you rely on either of these devices, please get in touch with us, so we can discuss your use case, and revise our plans accordingly. IMPORTANT: We have forked LittleCMS2 into LittleCMS2mt (the "mt" indicating "multi-thread"). LCMS2 is not thread safe and cannot be made thread safe without breaking the ABI. Our fork will be thread safe and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. If there is sufficient interest, our fork will be available as its own package separately from Ghostscript (and MuPDF). The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.32 / (download) - annotate - [select for diffs], Sun Sep 20 08:28:24 2020 UTC (3 years, 6 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2020Q3-base
Branch point for: pkgsrc-2020Q3
Changes since 1.31: +5 -5
lines
Diff to previous 1.31 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 9.53.1. The 9.53.1 release is primarily maintenance.
Revision 1.31 / (download) - annotate - [select for diffs], Sun Sep 13 14:16:30 2020 UTC (3 years, 7 months ago) by leot
Branch: MAIN
Changes since 1.30: +6 -6
lines
Diff to previous 1.30 (colored) to selected 1.36 (colored)
ghostscript-agpl: Update to 9.53.0 pkgsrc changes (for fonts/ghostscript-cidfonts-ryumin): - Add SUBST_NOOP_OK.ttf_path, at least for the default `cidfmap-adobe' that's a noop Changes: 9.53.0 ====== Highlights in this release include: - The 9.53.0 release is primarily maintenance. - The most obvious change is the (re-)introduction of the patch level to the version number, this helps facilitate a revised policy on handling security related issues. - Our efforts in code hygiene and maintainability continue. - We have added the capability to build with the Tesseract OCR engine. In such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR that image, and output the image "wrapped" up as a PDF file, with the OCR generated text information included as "invisible" text (in PDF terms, text rendering mode 3). Due to some patches to the Tesseract sources that are required (integrated upstream, but awaiting release), time constraints, and the experimental nature of the feature, we only support including Tesseract from source, not linking to Tesseract shared libraries. Whether we add this capability will be largely dependant on community demand for the feature. - We have added Python bindings for the gsapi interface, can be found in demos/python. These are experimental, and we welcome feedback from interested developers. - For those integrating Ghostscript/GhostPDL via the gsapi interface, we have added new capabilities to that, specifically in terms of setting and interrogating device parameters. These, along with the existing interface calls, are documented in: Ghostscript Interpreter API - IMPORTANT: In consultation with a representative of (OpenPrinting) it is our intention to deprecate and, in the not distant future, remove the OpenPrinting Vector/Raster Printer Drivers (that is, the opvp and oprp devices). If you rely on either of these devices, please get in touch with us, so we can discuss your use case, and revise our plans accordingly. - IMPORTANT: We have forked LittleCMS2 into LittleCMS2mt (the "mt" indicating "multi-thread"). LCMS2 is not thread safe and cannot be made thread safe without breaking the ABI. Our fork will be thread safe and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. If there is sufficient interest, our fork will be available as its own package separately from Ghostscript (and MuPDF). - The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.30 / (download) - annotate - [select for diffs], Wed Mar 25 07:46:19 2020 UTC (4 years ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2020Q2-base,
pkgsrc-2020Q2,
pkgsrc-2020Q1-base,
pkgsrc-2020Q1
Changes since 1.29: +2 -2
lines
Diff to previous 1.29 (colored) to selected 1.36 (colored)
ghostscript-agpl: get all LDFLAGS for FreeType2
Revision 1.29 / (download) - annotate - [select for diffs], Tue Mar 24 16:34:45 2020 UTC (4 years ago) by adam
Branch: MAIN
Changes since 1.28: +8 -10
lines
Diff to previous 1.28 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.52 Version 9.52: Highlights in this release include: The 9.52 release replaces the 9.51 release after a problem was reported with 9.51 which warranted the quick turnaround. Thus, like 9.51, 9.52 is primarily a maintenance release, consolidating the changes we introduced in 9.50. We have continued our work on code hygiene for this release, with a focus on the static analysis tool Coverity (from Synopsys, Inc) and we have now adopted a policy of maintaining zero Coverity issues in the Ghostscript/GhostPDL source base. IMPORTANT: In consultation with a representative of (OpenPrinting) it is our intention to deprecate and, in the not distant future, remove the OpenPrinting Vector/Raster Printer Drivers (that is, the opvp and oprp devices). If you rely on either of these devices, please get in touch with us, so we can discuss your use case, and revise our plans accordingly. IMPORTANT: We have forked LittleCMS2 into LittleCMS2mt (the "mt" indicating "multi-thread"). LCMS2 is not thread-safe, and cannot be made thread-safe without breaking the ABI. Our fork will be thread-safe and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. If there is sufficient interest, our fork will be available as its own package separately from Ghostscript (and MuPDF). The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.28 / (download) - annotate - [select for diffs], Thu Jan 16 11:25:41 2020 UTC (4 years, 3 months ago) by markd
Branch: MAIN
Changes since 1.27: +2 -1
lines
Diff to previous 1.27 (colored) to selected 1.36 (colored)
ghostscript-agpl: fix dvipdf
Revision 1.26.4.1 / (download) - annotate - [select for diffs], Tue Jan 7 19:49:26 2020 UTC (4 years, 3 months ago) by bsiegert
Branch: pkgsrc-2019Q4
Changes since 1.26: +2 -1
lines
Diff to previous 1.26 (colored) next main 1.27 (colored) to selected 1.36 (colored)
Pullup ticket #6109 - requested by sevan print/ghostscript-agpl: security fix Revisions pulled up: - print/ghostscript-agpl/Makefile 1.49 - print/ghostscript-agpl/distinfo 1.27 - print/ghostscript-agpl/patches/patch-Resource_Init_gs_ttf.ps 1.1 --- Module Name: pkgsrc Committed By: sevan Date: Fri Jan 3 23:56:09 UTC 2020 Modified Files: pkgsrc/print/ghostscript-agpl: Makefile distinfo Added Files: pkgsrc/print/ghostscript-agpl/patches: patch-Resource_Init_gs_ttf.ps Log Message: Patch CVE-2019-14869
Revision 1.27 / (download) - annotate - [select for diffs], Fri Jan 3 23:56:09 2020 UTC (4 years, 3 months ago) by sevan
Branch: MAIN
Changes since 1.26: +2 -1
lines
Diff to previous 1.26 (colored) to selected 1.36 (colored)
Patch CVE-2019-14869
Revision 1.26 / (download) - annotate - [select for diffs], Tue Dec 10 10:44:09 2019 UTC (4 years, 4 months ago) by leot
Branch: MAIN
CVS Tags: pkgsrc-2019Q4-base
Branch point for: pkgsrc-2019Q4
Changes since 1.25: +5 -5
lines
Diff to previous 1.25 (colored) to selected 1.36 (colored)
ghostscript-agpl: Update to 9.50 Changes: Version 9.50 (2019-09-30) Highlights in this release include: * The change to version 9.50 (rather than the intended 9.28) follows recognition of the extent and importance of the file access control redesign/reimplementation outlined below. * The file access control capability (enable with -dSAFER) has been completely rewritten, with a ground-up rethink of the design. For more details, see: SAFER. It is important to note that -dSAFER now only enables the file access controls, and no longer applies restrictions to standard Postscript functionality (specifically, restrictions on setpagedevice. If your application relies on these Postscript restrictions, see OLDSAFER, and please get in touch, as we do plan to remove those Postscript restrictions unless we have reason not to. IMPORTANT: File access controls are now enabled by default. In order to run Ghostscript without these controls, see NOSAFER Important Note for Windows Users: See below under Incompatible Changes * IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). * The usual round of bug fixes, compatibility changes, and incremental improvements. * Special thanks to Akira Kakuto, Paul Wessel, William Bader, Nelson H. F. Beebe and everyone else who put time and effort into testing this new release. For a list of open issues, or to report problems, please visit bugs.ghostscript.com. Incompatible changes * There are a couple of subtle incompatibilities between the old and new SAFER implementations. Firstly, as mentioned above, SAFER now leaves standard Postcript functionality unchanged (except for the file access limitations). Secondly, the interaction with save/restore operations, see SAFER. Important Note for Windows Users: The file/path pattern matching is case sensitive, even on Windows. This is a change in behaviour compared to the old code which, on Windows, was case insensitive. This is in recognition of changes in Windows behaviour, in that it now supports (although does not enforce) case sensitivity. * The following is not strictly speaking new to 9.50, as not much has changed since 9.27 in this area, but for those who don't upgrade with every release: The process of "tidying" the Postscript name space should have removed only non-standard and undocumented operators. Nevertheless, it is possible that any integrations or utilities that rely on those non-standard and undocumented operators may stop working, or may change behaviour. If you encounter such a case, please contact us (either the #ghostscript IRC channel, or the gs-devel mailing list would be best), and we'll work with you to either find an alternative solution or return the previous functionality, if there is genuinely no other option. One case we know this has occurred is GSView 5 (and earlier). GSView 5 support for PDF files relied upon internal use only features which are no longer available. GSView 5 will still work as previously for Postscript files. For PDF files, users are encouraged to look at MuPDF.
Revision 1.25 / (download) - annotate - [select for diffs], Wed Apr 17 08:28:44 2019 UTC (5 years ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2019Q3-base,
pkgsrc-2019Q3,
pkgsrc-2019Q2-base,
pkgsrc-2019Q2
Changes since 1.24: +6 -6
lines
Diff to previous 1.24 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.27 Version 9.27: Highlights in this release include: We have extensively cleaned up the Postscript name space: removing access to internal and/or undocumented Postscript operators, procedures and data. This has benefits for security and maintainability. We have added a new "product": "gpdl". This is a rethink/redesign of the old "language_switch" product (pspcl6), and includes all the interpreters we develop based on the Ghostscript graphics library: Postscript, PDF, PCL6, PXL and XPS. This is experimental, and should be considered of beta testing quality, and thus is not built by default: it can be built by using the "experimental" target. gpdl uses a heuristic to judge the file type being passed to it. In general, it supports most of the widely used command line options for each interpreter, but compatibility is not complete (the practicalities of swapping interpreters means it is unlikely that full parity of command line options will be possible). Fontmap can now reference invidual fonts in a TrueType Collection for font subsitution. Previously, a Fontmap entry could only reference a TrueType collection and use the default (first) font. Now, the Fontmap syntax allows for specifying a specific index in a TTC. See the comments at the top of (the default) Fontmap.GS for details. IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.24 / (download) - annotate - [select for diffs], Thu Nov 22 01:12:43 2018 UTC (5 years, 4 months ago) by leot
Branch: MAIN
CVS Tags: pkgsrc-2019Q1-base,
pkgsrc-2019Q1,
pkgsrc-2018Q4-base,
pkgsrc-2018Q4
Changes since 1.23: +5 -5
lines
Diff to previous 1.23 (colored) to selected 1.36 (colored)
ghostscript-agpl: Update print/ghostscript-agpl to 9.26 Changes: Version 9.26 (2018-11-20) Highlights in this release include: - Security issues have been the primary focus of this release, including solving several (well publicised) real and potential exploits. PLEASE NOTE: We strongly urge users to upgrade to this latest release to avoid these issues. - IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). - Thanks to Man Yue Mo of Semmle Security Research Team, Jens Mu:ller of Ruhr-Universita:t Bochum and Tavis Ormandy of Google's Project Zero for their help to identify specific security issues. - The usual round of bug fixes, compatibility changes, and incremental improvements. For a list of open issues, or to report problems, please visit bugs.ghostscript.com.
Revision 1.23 / (download) - annotate - [select for diffs], Mon Oct 1 09:21:32 2018 UTC (5 years, 6 months ago) by jperkin
Branch: MAIN
Changes since 1.22: +2 -1
lines
Diff to previous 1.22 (colored) to selected 1.36 (colored)
ghostscript-agpl: Fix build on older SunOS.
Revision 1.22 / (download) - annotate - [select for diffs], Fri Sep 21 12:06:46 2018 UTC (5 years, 6 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2018Q3-base,
pkgsrc-2018Q3
Changes since 1.21: +5 -5
lines
Diff to previous 1.21 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.25 Version 9.25: Highlights in this release include: This release fixes problems with argument handling, some unintended results of the security fixes to the SAFER file access restrictions (specifically accessing ICC profile files), and some additional security issues over the recent 9.24 release. Note: The ps2epsi utility does not, and cannot call Ghostscript with the -dSAFER command line option. It should never be called with input from untrusted sources. Security issues have been the primary focus of this release, including solving several (well publicised) real and potential exploits. PLEASE NOTE: We strongly urge users to upgrade to this latest release to avoid these issues. As well as Ghostscript itself, jbig2dec has had a significant amount of work improving its robustness in the face of out specification files. IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.21 / (download) - annotate - [select for diffs], Wed Sep 5 13:19:40 2018 UTC (5 years, 7 months ago) by adam
Branch: MAIN
Changes since 1.20: +8 -8
lines
Diff to previous 1.20 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.24 Version 9.24: Highlights in this release include: Security issues have been the primary focus of this release, including solving several (well publicised) real and potential exploits. PLEASE NOTE: We strongly urge users to upgrade to this latest release to avoid these issues. As well as Ghostscript itself, jbig2dec has had a significant amount of work improving its robustness in the face of out specification files. IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.20 / (download) - annotate - [select for diffs], Wed Mar 21 17:41:01 2018 UTC (6 years, 1 month ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2018Q2-base,
pkgsrc-2018Q2,
pkgsrc-2018Q1-base,
pkgsrc-2018Q1
Changes since 1.19: +5 -5
lines
Diff to previous 1.19 (colored) to selected 1.36 (colored)
ghostscript-agpl: updated to 9.23 Version 9.23: Ghostscript now has a family of 'pdfimage' devices (pdfimage8, pdfimage24 and pdfimage32) which produce rendered output wrapped up as an image in a PDF. Additionally, there is a 'pclm' device which produces PCLm format output. There is now a ColorAccuracy parameter allowing the user to decide between speed or accuracy in ICC color transforms. JPEG Passthrough: devices which support it can now receive the 'raw' JPEG stream from the interpreter. The main use of this is the pdfwrite/ps2write family of devices that can now take JPEG streams from the input file(s) and write them unchanged to the output (thus avoiding additional quantization effects). PDF transparency performance improvements IMPORTANT: We are in the process of forking LittleCMS. LCMS2 is not thread safe, and cannot be made thread safe without breaking the ABI. Our fork will be thread safe, and include performance enhancements (these changes have all be been offered and rejected upstream). We will maintain compatibility between Ghostscript and LCMS2 for a time, but not in perpetuity. Our fork will be available as its own package separately from Ghostscript (and MuPDF). We have continued the focus on code hygiene in this release cleaning up security issues, ignored return values, and compiler warnings. The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.19 / (download) - annotate - [select for diffs], Thu Jan 25 10:38:57 2018 UTC (6 years, 2 months ago) by jperkin
Branch: MAIN
Changes since 1.18: +2 -2
lines
Diff to previous 1.18 (colored) to selected 1.36 (colored)
ghostscript-agpl: Use correct linker flags on SunOS.
Revision 1.18 / (download) - annotate - [select for diffs], Fri Oct 6 06:15:00 2017 UTC (6 years, 6 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2017Q4-base,
pkgsrc-2017Q4
Changes since 1.17: +5 -5
lines
Diff to previous 1.17 (colored) to selected 1.36 (colored)
ghostscript-agpl: update to 9.22 Highlights in this release include: * Ghostscript can now consume and produce (via the pdfwrite device) PDF 2.0 compliant files. * The main focus of this release has been security and code cleanliness. Hence many AddressSanitizer, Valgrind and Coverity issues have been addressed. * The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.17 / (download) - annotate - [select for diffs], Wed Jul 12 08:55:36 2017 UTC (6 years, 9 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2017Q3-base,
pkgsrc-2017Q3
Changes since 1.16: +2 -2
lines
Diff to previous 1.16 (colored) to selected 1.36 (colored)
Honor LDFLAGS in more places. Fixes RELRO build.
Revision 1.16 / (download) - annotate - [select for diffs], Thu Apr 20 09:20:55 2017 UTC (7 years ago) by jperkin
Branch: MAIN
CVS Tags: pkgsrc-2017Q2-base,
pkgsrc-2017Q2
Changes since 1.15: +2 -2
lines
Diff to previous 1.15 (colored) to selected 1.36 (colored)
Ensure pkgsrc libraries can be found.
Revision 1.15 / (download) - annotate - [select for diffs], Fri Mar 31 07:26:23 2017 UTC (7 years ago) by adam
Branch: MAIN
Changes since 1.14: +9 -9
lines
Diff to previous 1.14 (colored) to selected 1.36 (colored)
Version 9.21 (2017-03-16) This is the fifteenth full release in the stable 9.x series. Highlights in this release include: * pdfwrite now preserves annotations from input PDFs (where possible). * The GhostXPS interpreter now provides the pdfwrite device with the data it requires to emit a ToUnicode CMap: thus allowing fully searchable PDFs to be created from XPS input (in the vast majority of cases). * Ghostscript now allows the default color space for PDF transparency blends. * The Ghostscript/GhostPDL configure script now has much better/fuller support for cross compiling. * The tiffscaled and tiffscaled4 devices can now use ETS (Even Tone Screening) * The toolbin/pdf_info.ps utility can now emit the PDF XML metadata. * Ghostscript has a new scan converter available (currently optional, but will become the default in a near future release). It can be enabled by using the command line option: '-dSCANCONVERTERTYPE=2'. This new implementation provides vastly improved performance with large and complex paths. * The usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.14 / (download) - annotate - [select for diffs], Sun Oct 9 17:15:11 2016 UTC (7 years, 6 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2017Q1-base,
pkgsrc-2017Q1,
pkgsrc-2016Q4-base,
pkgsrc-2016Q4
Changes since 1.13: +3 -3
lines
Diff to previous 1.13 (colored) to selected 1.36 (colored)
Restore linking on Darwin.
Revision 1.13 / (download) - annotate - [select for diffs], Fri Sep 30 12:37:31 2016 UTC (7 years, 6 months ago) by wiz
Branch: MAIN
Changes since 1.12: +7 -8
lines
Diff to previous 1.12 (colored) to selected 1.36 (colored)
Updated ghostscript-agpl to 9.20. Remove Makefile.common that is not used by anything, despite a comment to the contrary. Highlights in this release include: The usual round of bug fixes, compatibility changes, and incremental improvements. For a list of open issues, or to report problems, please visit bugs.ghostscript.com. Incompatible changes The planned device API tidy did not happen for this release, due to time pressures, but we still intend to undertake the following: We plan to somewhat tidy up the device API. We intend to remove deprecated device procs (methods/function pointers) and change the device API so every device proc takes a graphics state parameter (rather than the current scheme where only a very few procs take an imager state parameter). This should serve as notice to anyone maintaining a Ghostscript device outside the canonical source tree that you may (probably will) need to update your device(s) when these changes happen. Devices using only the non-deprecated procs should be trivial to update.
Revision 1.12 / (download) - annotate - [select for diffs], Thu Apr 7 08:52:05 2016 UTC (8 years ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2016Q3-base,
pkgsrc-2016Q3,
pkgsrc-2016Q2-base,
pkgsrc-2016Q2
Changes since 1.11: +8 -8
lines
Diff to previous 1.11 (colored) to selected 1.36 (colored)
Changes 9.19: * New custom PJL (near) equivalents for pdfmark and setdistillerparams. * Metadata pdfmark is now implemented. * An experimental, rudimentary raster trapping implementation implementation has been added to the Ghostscript graphics library. * The halftone threshold array generation tools (part of toolbin/halftone) have been improved with thresh_remap which allows folding the transfer function (AKA toner response curve (TRC)) into the threshold array so that highlights are improved. Further, gen_stochastic has improved support for minimum dot size and shape. * Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.11 / (download) - annotate - [select for diffs], Thu Dec 10 11:58:58 2015 UTC (8 years, 4 months ago) by markd
Branch: MAIN
CVS Tags: pkgsrc-2016Q1-base,
pkgsrc-2016Q1,
pkgsrc-2015Q4-base,
pkgsrc-2015Q4
Changes since 1.10: +2 -2
lines
Diff to previous 1.10 (colored) to selected 1.36 (colored)
Add gserrors.h to the installed files (upstream Bug 696301)
Revision 1.10 / (download) - annotate - [select for diffs], Wed Nov 4 01:01:33 2015 UTC (8 years, 5 months ago) by agc
Branch: MAIN
Changes since 1.9: +2 -1
lines
Diff to previous 1.9 (colored) to selected 1.36 (colored)
Add SHA512 digests for distfiles for print category Problems found locating distfiles: Package acroread7: missing distfile AdobeReader_enu-7.0.9-1.i386.tar.gz Package acroread8: missing distfile AdobeReader_enu-8.1.7-1.sparc.tar.gz Package cups-filters: missing distfile cups-filters-1.1.0.tar.xz Package dvidvi: missing distfile dvidvi-1.0.tar.gz Package lgrind: missing distfile lgrind.tar.bz2 Otherwise, existing SHA1 digests verified and found to be the same on the machine holding the existing distfiles (morden). All existing SHA1 digests retained for now as an audit trail.
Revision 1.9 / (download) - annotate - [select for diffs], Sun Oct 11 08:44:01 2015 UTC (8 years, 6 months ago) by adam
Branch: MAIN
Changes since 1.8: +2 -2
lines
Diff to previous 1.8 (colored) to selected 1.36 (colored)
Checksum update
Revision 1.8 / (download) - annotate - [select for diffs], Sat Oct 10 11:55:18 2015 UTC (8 years, 6 months ago) by adam
Branch: MAIN
Changes since 1.7: +6 -6
lines
Diff to previous 1.7 (colored) to selected 1.36 (colored)
Changes 9.18: A substantial revision of the build system and GhostPDL directory structure, meaning the GhostPCL and GhostXPS "products" are now built by the Ghostscript build system "proper" rather than having their own builds which called the Ghostscript build system for certain parts of the builds. Ghostscript-only users should not be affected by this change. For users of the PCL and XPS interpreters (collectively downloaded as "GhostPDL") there is a new, "flatter" directory structure and only one configure and one make invocation to build all the products. There are also some executable default name changes to bring the PCL and XPS binaries in line with the Ghostscript ones. All executables now end up in the "bin" directory (or build specific variant thereof, e.g. "debugbin"). The PCL executable, by default, is now "gpcl6" on Unix like systems and "gpcl6win??.exe" (where "??" is either "32" or "64"). The XPS executable remains "gxps" on Unix-like systems, but similarly becomes "gxpswin??.exe" on Windows. Those using scripts or other automated processes will need to take steps to cope with these changes. A new method of internally inserting devices into the device chain has been developed, named "device subclassing". This allows suitably written devices to be more easily and consistently as "filter" devices. The first fruit of this is a new implementation of the "-dFirstPage"/"-dLastPage" feature which functions a device filter in the Ghostscript graphics library, meaning it works consistently with all input languages. The "ghostpdl.inf" file, provided to simplify installing a Postscript printer configure to produce output to suit Ghostscript's "pdfwrite" device is now available as a digitally signed version: "ghostpdl.cat". Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.7 / (download) - annotate - [select for diffs], Wed Aug 12 22:27:22 2015 UTC (8 years, 8 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2015Q3-base,
pkgsrc-2015Q3
Changes since 1.6: +2 -2
lines
Diff to previous 1.6 (colored) to selected 1.36 (colored)
Use memmove instead of memcpy in one place. It seems the arguments sometimes overlap, and _FORTIFY_SOURCE=2 causes it to dump core in this case. Bump PKGREVISION.
Revision 1.6 / (download) - annotate - [select for diffs], Mon Apr 6 11:24:55 2015 UTC (9 years ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2015Q2-base,
pkgsrc-2015Q2
Changes since 1.5: +5 -4
lines
Diff to previous 1.5 (colored) to selected 1.36 (colored)
Changes 9.16: * "LockColorants" command line option for tiffsep and psdcmyk devices. Specifying -dLockColorants will restrict those devices to only the colorants list on the command line (thus: -c "<< /SeparationColorNames [ /Cyan /Magenta /Yellow /Black /Violet /Orange] /SeparationOrder [ /Cyan /Magenta /Yellow /Black /Violet /Orange]>> setpagedevice"), rather than allowing the devices to add new colorants as encountered in the input. This is, obviously, preferable for real printers, where only a certain of inks will be available. * Improved high level devices handling of Forms. Whilst High level devices (eg pdfwrite) already checked Forms to see if they are duplicates, and if so use the initial definition. However, this does not improve performance, since the Form PaintProc still needs to be executed for each instance of the Form, and the matching algorithm could, in very odd circumstances, be defeated. The new implementation benefits both causes, meaning the second and subsequent invocation of the form need not re-run the PaintProc, and removes the heurisic aspect of the reuse detection. * New URW+ fonts in which the families NimbusMono, NimbusRoman and NimbusSans have been augmented with production quality Greek and Cyrillic glyphs. These correspond to our substitutes for the PDF base 14 fonts. * Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.5 / (download) - annotate - [select for diffs], Wed Oct 1 09:04:32 2014 UTC (9 years, 6 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2015Q1-base,
pkgsrc-2015Q1,
pkgsrc-2014Q4-base,
pkgsrc-2014Q4
Changes since 1.4: +5 -6
lines
Diff to previous 1.4 (colored) to selected 1.36 (colored)
Changes 9.15: Ghostscript now supports the PDF security handler revision 6. The pdfwrite and ps2write (and related) devices can now be forced to "flatten" glyphs into "basic" marking operations (rather than writing fonts to the output), by giving the -dNoOutputFonts command line option (defaults to "false") PostScript programs can now use get_params or get_param to determine if a page contains color markings by reading the pageneutralcolor state from the device (so whether the page is "color" or "mono"). Note that this is only accurate when in clist mode, so -dMaxBitmap=0 and -dGrayDetection=true should both be used. The pdfwrite device now supports Link annotations with GoTo and GoToR actions The pdfwrite device now supports BMC/BDC/EMC pdfmarks Regarding the new color management for the pdfwrite device introduced in the previous release, the proscription on using the new color management when producing PDF/A-1 compliant files is now lifted. To reiterate, also, with the new color management implementation, using the UseCIEColor option is strongly discouraged. For further information on the new pdfwrite color management, see: Color Conversion and Management Plus the usual round of bug fixes, compatibility changes, and incremental improvement
Revision 1.4 / (download) - annotate - [select for diffs], Fri Apr 4 08:48:43 2014 UTC (10 years ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2014Q3-base,
pkgsrc-2014Q3,
pkgsrc-2014Q2-base,
pkgsrc-2014Q2
Changes since 1.3: +7 -6
lines
Diff to previous 1.3 (colored) to selected 1.36 (colored)
Changes 9.14: pdfwrite now uses the same color management engine as Ghostscript rendering devices (by default LCMS2). This provides much better control over color conversion and color management generally, but will result in some small color differences when compared to the old system. It is no longer necessary to specify UseCIEColor (and we very much encourage you not to do this) or the ProcessColorModel if you want to convert a PDF file to a specific color space, simply set the ColorConversionStrategy appropriately. We do not expect any major problems to arise with this new code, but for the duration of this release a new switch -dPDFUseOldCMS is available which will restore the old color management. See: Color Conversion and Management Please note that due to constraints of the PDF/A-1 specification, the new color management does not yet apply when producing PDF/A files. A new device 'eps2write' has been added which allows for the creation of EPS files using the ps2write device instead of the old (deprecated and removed) pswrite device. This produces considerably better quality EPS files than the old epswrite device which is now also deprecated and will be removed in a future release. ps2write now has a feature to allow customisation of the output for specific devices. Please see PSDocOptions and PSPageOptions described in ps2ps2.htm Additional Distiller Params Ghostscript now reduces memory usage when processing PDF files that use transparency and output is to display devices such as Windows display or x11 (i.e. devices that are strictly full framebuffer devices), and to high level vector devices that cannot reproduce the PDF transparency model, such as the ps2write device or pdfwrite when 'flattening' to PDF 1.3 or earlier (-dCompatibilityLevel=1.3). This uses banding (clist) files to render the transparent areas in bands to reduce memory use, and unlike the existing page level banding, this is hidden from the target device. Ghostscript can now collect information for pages in temp files (in Ghostscript's clist format), then render and output pages for the job in arbitrary order, including normal, reverse, odd, even, or any order or subset of the pages. This is controlled with the --saved-page=___ option. (Note that this only applies to rendering devices, and not high level devices such as pdfwrite and ps2write.) See: Deferred Page Rendering The Ghostscript device architecture has been extended so that, when rendering bands into multiple threads, it is now possible to perform post-processing in multiple threads, such as downscale, post-render halftoning, or compression. Previously, post processing was only possible in the single main thread. This can improve performance significantly. Ghostscript has a new "pwgraster" output device for PWG Raster output The CUPS device now has improved support for PPD-less printing Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.3 / (download) - annotate - [select for diffs], Tue Sep 3 06:39:12 2013 UTC (10 years, 7 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2014Q1-base,
pkgsrc-2014Q1,
pkgsrc-2013Q4-base,
pkgsrc-2013Q4,
pkgsrc-2013Q3-base,
pkgsrc-2013Q3
Changes since 1.2: +4 -4
lines
Diff to previous 1.2 (colored) to selected 1.36 (colored)
Changes 9.10: * Background printing (BGPrint) is a new feature allowing an accumulated page clist to be rendered by one or more rendering threads whilst the interpreter (in the "main" thread) continues to accumulate the subsequent page's clist. For certain classes of file this can result in a useful performance increase. * GrayDetection allows suitably written devices to detect "color" input in near neutral tones (i.e. near monochrome) and to convert "on-the-fly" to pure grayscale, whilst retaining the ability to print full color on demand. This is primarily aimed at workflows where saving ink (especially color inks) is required. * LittleCMS2 and libpng have both been updated to the latest versions. * Support has been added to build the Ghostscript DLL for WinRT for x86, x64 and ARM (Requires MS Visual Studio 2012 Pro). * Processing of Windows command line arguments into UTF8 (as presaged a few releases ago) has been enhanced and enabled by default. * The URW Postscript font set has been updated to the latest version, fixing many compatibility problems with the Adobe fonts. * Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.2 / (download) - annotate - [select for diffs], Thu Aug 22 21:07:08 2013 UTC (10 years, 7 months ago) by adam
Branch: MAIN
Changes since 1.1: +8 -11
lines
Diff to previous 1.1 (colored) to selected 1.36 (colored)
Changes 9.09: * Background printing (BGPrint) is a new feature allowing an accumulated page clist to be rendered by one or more rendering threads whilst the interpreter (in the "main" thread) continues to accumulate the subsequent page's clist. For certain classes of file this can result in a useful performance increase. * GrayDetection allows suitably written devices to detect "color" input in near neutral tones (i.e. near monochrome) and to convert "on-the-fly" to pure grayscale, whilst retaining the ability to print full color on demand. This is primarily aimed at workflows where saving ink (especially color inks) is required. * LittleCMS2 and libpng have both been updated to the latest versions. * Support has been added to build the Ghostscript DLL for WinRT for x86, x64 and ARM (Requires MS Visual Studio 2012 Pro). * Processing of Windows command line arguments into UTF8 (as presaged a few releases ago) has been enhanced and enabled by default. * The URW Postscript font set has been updated to the latest version, fixing many compatibility problems with the Adobe fonts. * Plus the usual round of bug fixes, compatibility changes, and incremental improvements.
Revision 1.1 / (download) - annotate - [select for diffs], Sat Mar 16 22:25:21 2013 UTC (11 years, 1 month ago) by dholland
Branch: MAIN
CVS Tags: pkgsrc-2013Q2-base,
pkgsrc-2013Q2,
pkgsrc-2013Q1-base,
pkgsrc-2013Q1
Diff to selected 1.36 (colored)
Add ghostscript-agpl package, the same as the current print/ghostscript.