The NetBSD Project

CVS log for pkgsrc/print/cups-filters/patches/Attic/patch-configure

[BACK] Up to [cvs.NetBSD.org] / pkgsrc / print / cups-filters / patches

Request diff between arbitrary revisions


Default branch: MAIN


Revision 1.3, Sat May 2 12:04:44 2020 UTC (6 months, 3 weeks ago) by leot
Branch: MAIN
CVS Tags: HEAD
Changes since 1.2: +1 -1 lines
FILE REMOVED

cups-filters: Update to 1.27.4

pkgsrc changes:
 - Remove patches/patch-configure: applied uptsream
 - Convert the CHECK_PORTABILITY_SKIP to a REPLACE_BASH: it is more consistent
   with other REPLACE_BASHes (there are several files that are not installed
   then) and complaining about `==' test(1) operator in a bash script is
   not correct.

Changes:
1.27.4
------
- libcupsfilters, cups-browsed: Fix memory issues in
  ppdgenerator and cups-browsed (Pull request #226).
- pdftops: Mention cups-filters README, CUPS README in debug
  log (Pull request #225).
- pdftopdf, gstoraster, foomatic-rip: Use "-dSAFER"
  Ghostscript option, instead of the deprecated
  "-dPARANOIDSAFER" (Pull request #224).
- Build System: Replace '==' in configure.ac test with '=', as
  the former is a bashism (Pull request #222).

1.27.3
------
- cups-browsed: Allow sharing local queues pointing to remote
  CUPS queues and re-sharing printers discovered via
  BrowsePoll by default, using
  AllowResharingRemoteCUPSPrinters and
  NewBrowsePollQueuesShared directives in cups-browsed.conf
  (Issue #101, Pull request #218).
- driverless: Correctly unlink temporary file when generating
  PPD file (Pull request #220).
- cups-browsed: Fixed memory leaks (Pull request #219).
- foomatic-rip: PDF page count side-loads the PDF file to
  count the pages in, so it cannot be run in -dSAFER mode. Run
  even in -dNOSAFER mode to override the -dSAFER default of
  newer Ghostscript versions. This should not cause a security
  problem as we do not take an input file which could do
  arbitrary side-loads but we run hard-coded PostScript
  commands instead (Issue #216).
- libfontembed: Add checks to the test programs to not
  segfault if the test font file is not found (Pull request
  #214).
- Build System: Let ./configure fail if the supplied test font
  file path (or the default) does not exist (Pull request
  #214), also use the "find" command to find the test font
  file DejaVuSans.ttf under /usr/share/fonts, as every
  distribution has it somewhere else.

1.27.2
------
- foomatic-rip: In some PostScript input files it was possible
  that option settings did not get inserted or lines inserted
  on the wron place (Issue #208, Pull request #210).
- foomatic-rip: For the PDF page count call Ghostscript in
  sandbox mode and fix pointer arithmetics (Pull request
  #212).
- foomatic-rip: Zero-page-job handling changes made the last
  page of PostScript files not printed, also turning one-page
  jobs into zero-page jobs (Issue #200, Issue #206, Issue
  #208, Pull request #209, Pull request #210, Pull request
  #211).
- cups-browsed: check_printer_with_option() function:
  Initialize the value, add further checks, freeing memory and
  stop allocating magic numbers (Pull request #204).
- cups-browsed: Additional checks against crashes in the
  is_local_hostname() function (Ubuntu bug #1863716)

1.27.1
------
- libcupsfilters: Let the PPD generator not put any dashes
  into the PPD option and choice names when translating them
  from IPP attribute names, to avoid that on the
  back-translation by CUPS no double-dashes are
  generated. This broke paper tray selections with tray names
  like "tray-1", "tray-2", ... (Issue #192, Issue #201, Debian
  bug #949315).
- foomatic-rip: Fixed segfault when PRINTER environment
  variable is not supplied.
- pdftopdf, pdftops, gstoraster, gstopdf, gstopxl,
  rastertoescpx, rastertopclx, foomatic-rip: Handle zero-page
  jobs (Issue #117, Pull request #196, Pull request #197, Pull
  request #198, Pull request #200).
- texttopdf: Added support for CJK (double-width) fonts (Issue
  #135, Pull request #199).
- cups-browsed: Switched default for "CreateIPPPrinterQueues"
  from "local-only" to "All". The configure script options
  "--enable-auto-setup-local-only" and
  "--enable-auto-setup-driverless-only" can be used to change
  this default (Debian bug #921252).
- rastertoescpx: Fixed wrong freeing of a buffer.
- pdftops: Added options "crop-to-fit" and "fill" to the
  pdftopdf options which the pstops called by pdftops should
  not apply a second time.
- pdftops: Added missing "-sstdout=%stderr" to Ghostscript
  command line, to assure that all messages are redirected to
  stderr and do not mix up with the output data.

1.27.0
------
- cups-browsed: Eliminate the use of the local CUPS daemon's
  (the CUPS we are attached to) port number completely, so
  that for attaching to an arbitrary local CUPS daemon
  listening on an arbitrary port (or even not listening on
  localhost at all) it is enough to tell cups-browsed the
  domain socket the CUPS daemon is listening on.
- cups-browsed, libcupsfilters: Identify DNS-SD-reported
  printers as of the local CUPS daemon via UUID and not via
  the port on which the local CUPS is listening, as we do not
  always have this port available.
- cups-browsed: Leave the port for legacy CUPS browsing and
  broadcasting on 631, do not use a possible alternative port
  of the CUPS we are attached to. The legacy CUPS servers we
  communicate with are always remote ones.
- libcupsfilters: in the PPD generator prioritize
  print-color-mode-supported against
  pwg-raster-document-type-supported (Issue #186, Pull request
  #188)
- rastertopdf, rastertops, texttopdf, pdftoraster,
  mupdftoraster: Handle zero-page jobs, corrections on
  zero-page job handling (Issue #117)
- cups-browsed: When restarting after a crash make sure that
  local queue names have same upper/lower case as before.
- cups-browsed: Small code improvements to reduce crash
  probability.

1.26.2
------
- cups-browsed: Added crash guards to avoid crashes in case
  the dummy printer entry for a deleted master entry is used.
- cups-browsed: Set the port of the local CUPS daemon to be
  used according to the IPP_PORT environment variable.
- cups-browsed: Eliminated the use of the cupsGetPPD2()
  function of libcups completely, also the remaining calls
  in the record_printer_options() and update_cups_queues()
  functions, the former causing incomplete recording of
  option settings and the latter use of CUPS-generated
  PPDs not working when CUPS is running on a non-standard
  port.
- cups-browsed: Eliminated the use of the cupsGetPPD2()
  function of libcups in queue_overwritten(). The function
  actually loads the queue's PPD file if the queue is on a
  local CUPS on port 631. Due to a bug the function fails if
  an alternative port is used. This lets queue_overwritten()
  always assume that the PPD got removed and therefore the
  queue got overwritten. So queues got released from
  cups-browsed if it was printed on them or if they were
  supposed to be removed on shutdown.
- foomatic-rip: Fixed compilation with -fno-common. Starting
  from the upcoming GCC 10, the default of the -fcommon option
  will change to -fno-common. This causes compilation errors
  in foomatic-rip due to missing "external" declarations.
  (Pull request #184).

Revision 1.2 / (download) - annotate - [select for diffs], Wed Dec 21 22:38:07 2016 UTC (3 years, 11 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2020Q1-base, pkgsrc-2020Q1, pkgsrc-2019Q4-base, pkgsrc-2019Q4, pkgsrc-2019Q3-base, pkgsrc-2019Q3, pkgsrc-2019Q2-base, pkgsrc-2019Q2, pkgsrc-2019Q1-base, pkgsrc-2019Q1, pkgsrc-2018Q4-base, pkgsrc-2018Q4, pkgsrc-2018Q3-base, pkgsrc-2018Q3, pkgsrc-2018Q2-base, pkgsrc-2018Q2, pkgsrc-2018Q1-base, pkgsrc-2018Q1, pkgsrc-2017Q4-base, pkgsrc-2017Q4, pkgsrc-2017Q3-base, pkgsrc-2017Q3, pkgsrc-2017Q2-base, pkgsrc-2017Q2, pkgsrc-2017Q1-base, pkgsrc-2017Q1, pkgsrc-2016Q4-base, pkgsrc-2016Q4
Changes since 1.1: +3 -1 lines
Diff to previous 1.1 (colored)

Add comment to patch-configure and add it to distinfo.

Revision 1.1 / (download) - annotate - [select for diffs], Mon Dec 19 08:49:00 2016 UTC (3 years, 11 months ago) by wiz
Branch: MAIN

Updated cups-filters to 1.13.1.

CHANGES IN V1.13.1

	- cups-browsed: Avoid erroring out when restarting after a
	  crash (with generated queues not deleted due to the crash)
	  and the configuration option
	  CreateRemoteCUPSPrinterQueues=No being set.
	- cups-browsed: If CUPS is stopped while cups-browsed is
          running and there are queue for IPP network printers (not
          remote CUPS queues) on restart of CUPS the still existing
          local CUPS queue is not correctly re-connected with
          cups-browsed and therefore gets removed after a
          timeout. This should be fixed after a clean-up of
          re-connecting with remaining queues from a previous session
          (Debian bug #848223).
	- cups-browsed: Generated queues did not get removed on
          shutdown (Debian bug #848167).
	- libcupsfilters: Let PPD generator for driverless printing
	  suppress page sizes which the printer reports more than
	  once (CUPS Issue #4933).
	- driverless, libcupsfilters: Make "driverless list" output
	  and output of driverless as CUPS backend in discovery mode
	  add the word "driverless" to its output, to make it easier
	  to set up driverless printers with printer setup tools.
	  Made the NickName of the generated PPDs also match with the
	  "driverless list" output.

CHANGES IN V1.13.0

	- cups-browsed: Use the httpGetAddr() only with CUPS 2.0.x or
	  newer, as older CUPS versions do not provide it (Bug #1381).
	- cups-browsed: Minor corrections in the handling of the data
	  records of the discovered printers.
	- rastertopdf, urftopdf: As with libcupsimage from CUPS 2.2.2
	  on rastertopdf also understands Apple Raster and much better
	  than urftopdf does, use rastertopdf for Apple Raster
	  (image/urf) input files then. Also allow for manually
	  choosing by the ./configure command line.
	- driverless: Added a CUPS backend mode to the driverless
	  utility. Running as a CUPS backend in discovery mode it
	  lists the IPP URIs of the suitable printers in printer setup
	  tools and in "lpinfo -v", as conneting via IPP is required
	  for driverless printing.

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.




CVSweb <webmaster@jp.NetBSD.org>