The NetBSD Project

CVS log for pkgsrc/print/auctex/Makefile

[BACK] Up to [] / pkgsrc / print / auctex

Request diff between arbitrary revisions

Default branch: MAIN

Revision 1.70 / (download) - annotate - [select for diffs], Tue Jun 6 12:42:10 2023 UTC (3 months, 2 weeks ago) by riastradh
Branch: MAIN
CVS Tags: pkgsrc-2023Q2-base, pkgsrc-2023Q2, HEAD
Changes since 1.69: +2 -2 lines
Diff to previous 1.69 (colored)

Mass-change BUILD_DEPENDS to TOOL_DEPENDS outside mk/.

Almost all uses, if not all of them, are wrong, according to the
semantics of BUILD_DEPENDS (packages built for target available for
use _by_ tools at build-time) and TOOL_DEPEPNDS (packages built for
host available for use _as_ tools at build-time).

No change to BUILD_DEPENDS as used correctly inside buildlink3.

As proposed on tech-pkg:

Revision 1.69 / (download) - annotate - [select for diffs], Wed Apr 19 08:11:17 2023 UTC (5 months ago) by adam
Branch: MAIN
Changes since 1.68: +2 -2 lines
Diff to previous 1.68 (colored)

revbump after textproc/icu update

Revision 1.68 / (download) - annotate - [select for diffs], Sun Jan 29 21:17:34 2023 UTC (7 months, 3 weeks ago) by ryoon
Branch: MAIN
CVS Tags: pkgsrc-2023Q1-base, pkgsrc-2023Q1
Changes since 1.67: +2 -2 lines
Diff to previous 1.67 (colored)

*: Recursive revbup from graphics/freetype2

Revision 1.67 / (download) - annotate - [select for diffs], Tue Jan 3 17:38:05 2023 UTC (8 months, 2 weeks ago) by wiz
Branch: MAIN
Changes since 1.66: +2 -2 lines
Diff to previous 1.66 (colored)

*: recursive bump for tiff shlib major bump

Revision 1.66 / (download) - annotate - [select for diffs], Wed Oct 26 10:31:53 2022 UTC (10 months, 3 weeks ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2022Q4-base, pkgsrc-2022Q4
Changes since 1.65: +2 -1 lines
Diff to previous 1.65 (colored)

*: bump PKGREVISION for libunistring shlib major bump

Revision 1.65 / (download) - annotate - [select for diffs], Mon Aug 22 09:11:41 2022 UTC (13 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2022Q3-base, pkgsrc-2022Q3
Changes since 1.64: +2 -2 lines
Diff to previous 1.64 (colored)

auctex: remove xemacs from supported emacsen

From the release notes of 12.1 - xemacs support has been removed.

Revision 1.64 / (download) - annotate - [select for diffs], Mon Aug 22 08:49:44 2022 UTC (13 months ago) by markd
Branch: MAIN
Changes since 1.63: +2 -3 lines
Diff to previous 1.63 (colored)

auctex: update to 13.1

News in 13.1
* In math environments ather ather* athered ultlineand
  ultline* fill commands such as M-q and C-c C-q C-e are disabled.
* Now two commands ϵexindexand ϵexi2dviare available when you type
  C-c C-c in Texinfo mode. The command ϵexindexruns texindex on index
  files and ϵexi2dviruns pdftexi2dvi or texi2dvi according to the value
  of TeX-PDF-mode.
* AUCTeX own help messages for LaTeX errors are now shown only for LaTeX runs.
* Two functions TeX-split-string and TeX-assoc are now obsolete and will be
  removed in future release.
* The function TeX-read-key-val now accepts a function call as second argument.
* AUCTeX now requires GNU Emacs 24.3 or higher.
* Old implementations for viewers were discarded, as announced long before.
* AUCTeX now uses lexical binding which has been introduced in Emacs 24.
* The constant LaTeX-dialect has been renamed to TeX-dialect and moved from
  atex.elto ex.el LaTeX-dialect now is an obsolete alias.
* The style atexinfo.elis removed from AUCTeX.
* The style iunitx.elis updated to support package version 3.
* AUCTeX has preliminary support for LaTeX-hooks.
* Many other bugs were fixed.

News in 12.3
* Support for ϱSTricksis now PDF-oriented.
* The function font-latex-update-font-lock has been obsoleted.
* Math expression highlighting was improved.
* AUCTeX tracks changes in LaTeX2e 2020-02-02 release.
* More bugs fixed, other minor features implemented.

News in 12.2
* AUCTeX reflects the changes in LaTeX2e 2019-10-01 release.
* A new method is implemented in preview-latex to adjust the foreground
  colors of generated images to those of Emacs, when the LaTeX command
  produces PDF.
* AUCTeX has support for the Flymake package in Emacs 26 or newer.
* The way the option TeX-record-buffer is used was corrected.
* Several other bugs were fixed, many minor features were added.

News in 12.1
* AUCTeX now requires GNU Emacs 24 or higher. Support for XEmacs has been dropped.

Revision 1.63 / (download) - annotate - [select for diffs], Tue Jun 28 11:35:27 2022 UTC (14 months, 3 weeks ago) by wiz
Branch: MAIN
Changes since 1.62: +2 -2 lines
Diff to previous 1.62 (colored)

*: recursive bump for perl 5.36

Revision 1.62 / (download) - annotate - [select for diffs], Sat May 14 22:25:32 2022 UTC (16 months, 1 week ago) by dholland
Branch: MAIN
CVS Tags: pkgsrc-2022Q2-base, pkgsrc-2022Q2
Changes since 1.61: +2 -2 lines
Diff to previous 1.61 (colored)

Bump all elisp packages for the CONFLICTS change.

Revision 1.61 / (download) - annotate - [select for diffs], Wed Dec 8 16:06:12 2021 UTC (21 months, 2 weeks ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2022Q1-base, pkgsrc-2022Q1, pkgsrc-2021Q4-base, pkgsrc-2021Q4
Changes since 1.60: +2 -2 lines
Diff to previous 1.60 (colored)

revbump for icu and libffi

Revision 1.60 / (download) - annotate - [select for diffs], Wed Sep 29 19:01:13 2021 UTC (23 months, 3 weeks ago) by adam
Branch: MAIN
Changes since 1.59: +2 -2 lines
Diff to previous 1.59 (colored)

revbump for boost-libs

Revision 1.59 / (download) - annotate - [select for diffs], Mon May 24 19:53:44 2021 UTC (2 years, 3 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2021Q3-base, pkgsrc-2021Q3, pkgsrc-2021Q2-base, pkgsrc-2021Q2
Changes since 1.58: +2 -2 lines
Diff to previous 1.58 (colored)

*: recursive bump for perl 5.34

Revision 1.58 / (download) - annotate - [select for diffs], Wed Apr 21 13:25:15 2021 UTC (2 years, 5 months ago) by adam
Branch: MAIN
Changes since 1.57: +2 -2 lines
Diff to previous 1.57 (colored)

revbump for boost-libs

Revision 1.57 / (download) - annotate - [select for diffs], Fri Dec 4 04:56:09 2020 UTC (2 years, 9 months ago) by riastradh
Branch: MAIN
CVS Tags: pkgsrc-2021Q1-base, pkgsrc-2021Q1, pkgsrc-2020Q4-base, pkgsrc-2020Q4
Changes since 1.56: +2 -2 lines
Diff to previous 1.56 (colored)

Revbump for openpam cppflags change months ago, belatedly.

Revision 1.56 / (download) - annotate - [select for diffs], Mon Aug 31 18:11:00 2020 UTC (3 years ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2020Q3-base, pkgsrc-2020Q3
Changes since 1.55: +2 -2 lines
Diff to previous 1.55 (colored)

*: bump PKGREVISION for perl-5.32.

Revision 1.55 / (download) - annotate - [select for diffs], Mon Aug 17 20:19:54 2020 UTC (3 years, 1 month ago) by leot
Branch: MAIN
Changes since 1.54: +2 -2 lines
Diff to previous 1.54 (colored)

*: revbump after fontconfig bl3 changes (libuuid removal)

Revision 1.54 / (download) - annotate - [select for diffs], Fri May 22 10:56:33 2020 UTC (3 years, 4 months ago) by adam
Branch: MAIN
CVS Tags: pkgsrc-2020Q2-base, pkgsrc-2020Q2
Changes since 1.53: +2 -2 lines
Diff to previous 1.53 (colored)

revbump after updating security/nettle

Revision 1.53 / (download) - annotate - [select for diffs], Tue May 12 11:11:11 2020 UTC (3 years, 4 months ago) by markd
Branch: MAIN
Changes since 1.52: +2 -2 lines
Diff to previous 1.52 (colored)

auctex: needs BUILD_DEPENDS on tex-texlive-scripts-extra for kpsepath

Revision 1.52 / (download) - annotate - [select for diffs], Tue Mar 10 22:10:50 2020 UTC (3 years, 6 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2020Q1-base, pkgsrc-2020Q1
Changes since 1.51: +2 -2 lines
Diff to previous 1.51 (colored)

librsvg: update to remove libcroco in rust case

recursive bump for the dependency change

Revision 1.51 / (download) - annotate - [select for diffs], Sun Mar 8 16:51:02 2020 UTC (3 years, 6 months ago) by wiz
Branch: MAIN
Changes since 1.50: +2 -2 lines
Diff to previous 1.50 (colored)

*: recursive bump for libffi

Revision 1.50 / (download) - annotate - [select for diffs], Sat Jan 18 23:33:27 2020 UTC (3 years, 8 months ago) by rillig
Branch: MAIN
Changes since 1.49: +2 -2 lines
Diff to previous 1.49 (colored)

all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as, CTAN and GNU.

Revision 1.49 / (download) - annotate - [select for diffs], Mon Nov 4 19:57:58 2019 UTC (3 years, 10 months ago) by rillig
Branch: MAIN
CVS Tags: pkgsrc-2019Q4-base, pkgsrc-2019Q4
Changes since 1.48: +2 -2 lines
Diff to previous 1.48 (colored)

print: align variable assignments

pkglint -Wall -F --only aligned --only indent -r

No manual corrections.

Revision 1.48 / (download) - annotate - [select for diffs], Sun Aug 11 13:22:37 2019 UTC (4 years, 1 month ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2019Q3-base, pkgsrc-2019Q3
Changes since 1.47: +2 -2 lines
Diff to previous 1.47 (colored)

Bump PKGREVISIONs for perl 5.30.0

Revision 1.47 / (download) - annotate - [select for diffs], Sun Jul 21 22:25:36 2019 UTC (4 years, 2 months ago) by wiz
Branch: MAIN
Changes since 1.46: +2 -2 lines
Diff to previous 1.46 (colored)

*: recursive bump for gdk-pixbuf2-2.38.1

Revision 1.46 / (download) - annotate - [select for diffs], Sat Jul 20 22:46:44 2019 UTC (4 years, 2 months ago) by wiz
Branch: MAIN
Changes since 1.45: +2 -1 lines
Diff to previous 1.45 (colored)

*: recursive bump for nettle 3.5.1

Revision 1.45 / (download) - annotate - [select for diffs], Fri Jul 5 15:32:09 2019 UTC (4 years, 2 months ago) by hauke
Branch: MAIN
Changes since 1.44: +28 -15 lines
Diff to previous 1.44 (colored)

Update print/auctex to 11.92.

Three years' worth of changes are too much to list here - see the
file ChangeLog.1.

Add preview support, which excludes emacs2[01] for lack of graphics support.

Add *tex and ghostscript package dependency, providing a working setup
(the FreeBSD package does the same).

Tested with editors/{xemacs,emacs26}.

Revision 1.44 / (download) - annotate - [select for diffs], Thu Jul 4 15:06:06 2019 UTC (4 years, 2 months ago) by hauke
Branch: MAIN
Changes since 1.43: +7 -2 lines
Diff to previous 1.43 (colored)

Honour VARBASE for auctex spool directory.

Revision 1.43 / (download) - annotate - [select for diffs], Thu Jul 4 14:44:15 2019 UTC (4 years, 2 months ago) by hauke
Branch: MAIN
Changes since 1.42: +10 -4 lines
Diff to previous 1.42 (colored)

Fix the build for XEmacs. (Did this ever build?)

Tested with editors/{xemacs,emacs26}.

Revision 1.42 / (download) - annotate - [select for diffs], Sat Aug 20 12:27:32 2016 UTC (7 years, 1 month ago) by mef
Branch: MAIN
CVS Tags: pkgsrc-2019Q2-base, pkgsrc-2019Q2, pkgsrc-2019Q1-base, pkgsrc-2019Q1, pkgsrc-2018Q4-base, pkgsrc-2018Q4, pkgsrc-2018Q3-base, pkgsrc-2018Q3, pkgsrc-2018Q2-base, pkgsrc-2018Q2, pkgsrc-2018Q1-base, pkgsrc-2018Q1, pkgsrc-2017Q4-base, pkgsrc-2017Q4, pkgsrc-2017Q3-base, pkgsrc-2017Q3, pkgsrc-2017Q2-base, pkgsrc-2017Q2, pkgsrc-2017Q1-base, pkgsrc-2017Q1, pkgsrc-2016Q4-base, pkgsrc-2016Q4, pkgsrc-2016Q3-base, pkgsrc-2016Q3
Changes since 1.41: +2 -2 lines
Diff to previous 1.41 (colored)

Updated print/auctex to 11.89
News in 11.89

   * You can now run all commands needed to compile a document and then
     open the viewer with a single command: 'TeX-command-run-all', bound
     to 'C-c C-a'.

   * Commands such as LaTeX and View can now be executed conveniently on
     the current section (or part, chapter, subsection, etc).  See
     'LaTeX-command-section' and 'LaTeX-command-section-change-level'.

   * Forward and backward search with Evince now also work when only a
     region of the document is compiled/viewed.

   * To open the PDF output file you can now use also PDF Tools, a
     document viewer for Emacs.  With it, as a plus, forward and
     backward search is accurate at word level.

   * With new option 'TeX-PDF-via-dvips-ps2pdf' it is possible to
     compile a document to DVI and then convert it to PDF using
     'dvips'-'ps2pdf' before viewing it.

   * New option 'TeX-file-line-error' allows to select file:line:error
     style for error messages.

   * Indent '\[...\]' math mode as a regular environment by default.

   * Now AUCTeX suggests to run 'makeindex' when appropriate.

   * 'TeX-view-program-list' can contain, as third optional element of
     each item, the name of the executable(s) needed to open the viewer.

   * 'TeX-expand-list' variable has been split into 'TeX-expand-list'
     and 'TeX-expand-list-builtin'.  Only the former is intended to be
     customized by the user, the latter contains built-in expanders.
     You might want to keep in 'TeX-expand-list' only new expansion

   * Before running commands like TeX and LaTeX, now AUCTeX performs
     some checks.  If 'TeX-check-TeX' is non-nil, it will test whether a
     working TeX distribution is actually present in the system and
     available to Emacs.  Instead, when 'TeX-check-engine' is non-nil,
     before running LaTeX commands AUCTeX will check whether the correct
     engine has been set, based upon known restrictions posed by LaTeX

   * Basic support to ConTeXt Mark IV has been added.  Users can now
     select the Mark version to be used with new option
     'ConTeXt-Mark-version', and AUCTeX is able to catch error messages
     in the output log of a Mark IV document.

   * Support for tons of LaTeX packages has been addedd.

   * Numbers of bugs have been fixed, many minor features have been

Revision 1.41 / (download) - annotate - [select for diffs], Sun Nov 23 06:05:39 2014 UTC (8 years, 10 months ago) by mef
Branch: MAIN
CVS Tags: pkgsrc-2016Q2-base, pkgsrc-2016Q2, pkgsrc-2016Q1-base, pkgsrc-2016Q1, pkgsrc-2015Q4-base, pkgsrc-2015Q4, pkgsrc-2015Q3-base, pkgsrc-2015Q3, pkgsrc-2015Q2-base, pkgsrc-2015Q2, pkgsrc-2015Q1-base, pkgsrc-2015Q1, pkgsrc-2014Q4-base, pkgsrc-2014Q4
Changes since 1.40: +2 -3 lines
Diff to previous 1.40 (colored)
News in 11.88

  * TeX-PDF-mode is now enabled by default.
  * Now TeX-previous-error works with TeX commands if the new option
    TeX-parse-all-errors is non-nil, which is the default. When this option is
    non-nil, an overview of errors and warnings reported by the TeX compiler
    can be opened with M-x TeX-error-overview <RET>. See Debugging, for
  * Style file authors are encouraged to distinguish common from expert macros
    and environments, and mark the latter using TeX-declare-expert-macros and

    Users can then restrict completion using TeX-complete-expert-commands.

  * Management of LaTeX package options in the parser was improved. You might
    need to reparse your documents, especially if you loaded the ?babel?
    package with language options.
  * Now you can insert ?$...$? or ?\(...\)? by typing a single $. To do this,
    customize the new option ?TeX-electric-math?. TeX-math-close-double-dollar
    was removed. See Quotes, for details.
  * C-c <RET> documentclass <RET> completes with all available LaTeX classes,
    if the TeX-arg-input-file-search variable is non-nil. Completion for class
    options of the standard LaTeX classes is provided as well.
  * New user options LaTeX-default-author, LaTeX-fontspec-arg-font-search,
    LaTeX-fontspec-font-list-default, TeX-date-format, and
    TeX-insert-braces-alist. A new possible value (show-all-optional-args) for
    TeX-insert-macro-default-style was added. The default value of
    TeX-source-correlate-method has been changed.
  * ?biblatex? support was greatly expanded. If parsing is enabled, AUCTeX
    looks at ?backend? option to decide whether to use Biber or BibTeX. The
    LaTeX-biblatex-use-Biber variable was changed to be file local only and is
    no more customizable.
  * With some LaTeX classes, the default environment suggested by
    LaTeX-environment (C-c C-e) when the current environment is ?document? was
    changed. With ?beamer? class the default environment is ?frame?, with
    ?letter? it is ?letter?, with ?slides? it is ?slide?.
  * Brace pairing feature was enhanced in LaTeX documents. Support for ?\bigl?,
    ?\Bigl?, ?\biggl? and ?\Biggl?, the same as the one for ?\left?, was added
    to TeX-insert-macro. For example, C-c <RET> bigl <RET> ( <RET> inserts ?\

    You can insert brace pair ?()?, ?{}? and ?[]? by typing a single left brace
    if the new user option LaTeX-electric-left-right-brace is enabled.

    Macros ?\langle?, ?\lfloor? and ?\lceil?, which produce the left part of
    the paired braces, are treated similarly as ?(?, ?{? and ?[? during the
    course of TeX-insert-macro. See Quotes, for details.

  * Support for dozens of LaTeX packages was added.
  * Tabular-like environments (tabular, tabular*, tabularx, tabulary, array,
    align, ...) are indented in a nicer and more informative way when the
    column values of a table line are written across multiple lines in the tex
  * The suitable number of ampersands are inserted when you insert array,
    tabular and tabular* environments with C-c C-e. Similar experience is
    obtained if you terminate rows in these environments with C-c <LFD>. It
    supplies line break macro ?\\? and inserts the suitable number of
    ampersands on the next line.

    Similar supports are provided for various amsmath environments.

    See Tabular-like, for details.

  * Commands for narrowing to a group (TeX-narrow-to-group) and to LaTeX
    environments (LaTeX-narrow-to-environment) were added.
  * Now arbitrary options can be passed to the TeX processor on a per file
    basis using the TeX-command-extra-options option. See Processor Options,
    for details.
  * Now C-c C-e document <RET>, in an empty document, prompts for ?\usepackage?
    macros in addition to ?\documentclass?.
  * TeX-add-style-hook has now a third argument to tell AUCTeX for which
    dialect (LaTeX, Texinfo or BibTeX) the style hook is registers. Labelling
    style hook by dialect will avoid applying them not in the right context.
  * There have been lots of bug fixes and feature additions.

Revision 1.40 / (download) - annotate - [select for diffs], Sun Feb 17 19:18:08 2013 UTC (10 years, 7 months ago) by dholland
Branch: MAIN
CVS Tags: pkgsrc-2014Q3-base, pkgsrc-2014Q3, pkgsrc-2014Q2-base, pkgsrc-2014Q2, pkgsrc-2014Q1-base, pkgsrc-2014Q1, pkgsrc-2013Q4-base, pkgsrc-2013Q4, pkgsrc-2013Q3-base, pkgsrc-2013Q3, pkgsrc-2013Q2-base, pkgsrc-2013Q2, pkgsrc-2013Q1-base, pkgsrc-2013Q1
Changes since 1.39: +2 -1 lines
Diff to previous 1.39 (colored)

Revbump all elisp packages after emacs changes.

Revision 1.39 / (download) - annotate - [select for diffs], Wed Jan 23 08:58:29 2013 UTC (10 years, 8 months ago) by mef
Branch: MAIN
Changes since 1.38: +2 -2 lines
Diff to previous 1.38 (colored)

News since 11.87

   * AUCTeX now supports Biber in conjunction with biblatex in addition
     to BibTeX.

   * Each AUCTeX mode now has its own abbrev table.  On Emacsen which
     provide the possibility to inherit abbrevs from other tables, the
     abbrevs from the Text mode abbrev table are available as well.
     Newly defined abbrevs are written to the mode-specific tables,

   * The file `tex-fptex.el' was removed.

   * Forward/backward search for Evince has been improved.  If Emacs is
     compiled with DBUS support and a recent Evince version (3.x) is
     installed, the communication goes over the desktop bus instead of
     the command line, resulting in more accurate positioning of point
     in Emacs and highlighting of the target paragraph in Evince.

   * A problem where Ghostscript threw an /invalidfileaccess error when
     running preview-latex was fixed.

   * A lot of smaller fixes and additions have been made.

Revision 1.38 / (download) - annotate - [select for diffs], Mon Oct 8 13:45:35 2012 UTC (10 years, 11 months ago) by asau
Branch: MAIN
CVS Tags: pkgsrc-2012Q4-base, pkgsrc-2012Q4
Changes since 1.37: +1 -2 lines
Diff to previous 1.37 (colored)

Drop PKG_DESTDIR_SUPPORT setting, "user-destdir" is default these days.

Revision 1.37 / (download) - annotate - [select for diffs], Sat Dec 25 13:16:22 2010 UTC (12 years, 9 months ago) by mef
Branch: MAIN
CVS Tags: pkgsrc-2012Q3-base, pkgsrc-2012Q3, pkgsrc-2012Q2-base, pkgsrc-2012Q2, pkgsrc-2012Q1-base, pkgsrc-2012Q1, pkgsrc-2011Q4-base, pkgsrc-2011Q4, pkgsrc-2011Q3-base, pkgsrc-2011Q3, pkgsrc-2011Q2-base, pkgsrc-2011Q2, pkgsrc-2011Q1-base, pkgsrc-2011Q1, pkgsrc-2010Q4-base, pkgsrc-2010Q4
Changes since 1.36: +3 -3 lines
Diff to previous 1.36 (colored)

(1) Bump AUCTeX version 11.84 to 11.86
(2) LICENSE= gnu-gpl-v3
Based on PR pkg/43966.

News in 11.86

   * Parsing of LaTeX output was improved.  It is now less likely that
     AUCTeX opens a non-existent file upon calling `TeX-next-error'; a
     problem for example encountered when using MiKTeX 2.8.  In addition
     quoted file names as emitted by MiKTeX are now supported.

   * A new framework for the definition and selection of viewers was
     implemented.  If you have customizations regarding viewers you
     will have to redo them in this new framework or reenable the old
     one.  See the section on viewers in the manual for details.

   * Comprehensive editing support for PSTricks was added.

   * Support for various LaTeX packages was added, e.g. `tabularx',
     `CJK', and `hyperref'.

   * An easy way to switch between TeX engines (PDFTeX, LuaTeX, XeTeX,
     Omega) was added.

   * Support for SyncTeX was added.  This involves the command line
     options for LaTeX and the viewer.

   * Folding can now be customized to use macro arguments as replacement

   * `preview.sty' now works with XeTeX.

   * A lot of smaller and larger bugs have been squashed.

News in 11.85

   * Font locking has been improved significantly.  It is now less
     prone to color bleeding which could lead to high resource usage.
     In addition it now includes information about LaTeX macro syntax
     and can indicate syntactically incorrect macros in LaTeX mode.

   * The license was updated to GPLv3.

   * Support for the nomencl, flashcards and comment LaTeX packages as
     well as the Icelandic language option of babel were added.

   * Support for folding of math macros was added.

   * Lots of minor bugs in features and documentation fixed.

Revision 1.36 / (download) - annotate - [select for diffs], Thu Aug 6 01:44:55 2009 UTC (14 years, 1 month ago) by minskim
Branch: MAIN
CVS Tags: pkgsrc-2010Q3-base, pkgsrc-2010Q3, pkgsrc-2010Q2-base, pkgsrc-2010Q2, pkgsrc-2010Q1-base, pkgsrc-2010Q1, pkgsrc-2009Q4-base, pkgsrc-2009Q4, pkgsrc-2009Q3-base, pkgsrc-2009Q3
Changes since 1.35: +2 -1 lines
Diff to previous 1.35 (colored)

PKGREVISION bump for elisp packages because of bytecode format changes
in emacs23.

Revision 1.35 / (download) - annotate - [select for diffs], Sat Oct 11 09:31:58 2008 UTC (14 years, 11 months ago) by uebayasi
Branch: MAIN
CVS Tags: pkgsrc-2009Q2-base, pkgsrc-2009Q2, pkgsrc-2009Q1-base, pkgsrc-2009Q1, pkgsrc-2008Q4-base, pkgsrc-2008Q4
Changes since 1.34: +4 -2 lines
Diff to previous 1.34 (colored)

Move mk/ to editors/emacs/

Don't call pkg_info to get the installed Emacs version; always use the
version matching EMACS_TYPE set by users.  Be DEPENDS to it.  This should
address pkg/37146 by Aleksey Cheusov.

While here convert some emacs lisp packages to user-destdir.

Revision 1.34 / (download) - annotate - [select for diffs], Thu Jun 12 02:14:43 2008 UTC (15 years, 3 months ago) by joerg
Branch: MAIN
CVS Tags: pkgsrc-2008Q3-base, pkgsrc-2008Q3, pkgsrc-2008Q2-base, pkgsrc-2008Q2, cwrapper, cube-native-xorg-base, cube-native-xorg
Changes since 1.33: +3 -1 lines
Diff to previous 1.33 (colored)

Add DESTDIR support.

Revision 1.33 / (download) - annotate - [select for diffs], Mon Oct 29 04:44:04 2007 UTC (15 years, 10 months ago) by uebayasi
Branch: MAIN
CVS Tags: pkgsrc-2008Q1-base, pkgsrc-2008Q1, pkgsrc-2007Q4-base, pkgsrc-2007Q4
Changes since 1.32: +7 -6 lines
Diff to previous 1.32 (colored)

Sort variables depending on ${EMACS_FLAVOR} (emacs or xemacs).  Prefer
assignment to conditional.  Include mk/ lazily.

No functional changes intended.

Revision 1.32 / (download) - annotate - [select for diffs], Wed Jan 17 13:18:42 2007 UTC (16 years, 8 months ago) by tonio
Branch: MAIN
CVS Tags: pkgsrc-2007Q3-base, pkgsrc-2007Q3, pkgsrc-2007Q2-base, pkgsrc-2007Q2, pkgsrc-2007Q1-base, pkgsrc-2007Q1
Changes since 1.31: +4 -4 lines
Diff to previous 1.31 (colored)

Update print/auctex to 11.84

- AUCTeX and preview-latex have been changed in order to accommodate
  file names containing spaces.  preview-latex now tolerates bad
  PostScript code polluting the stack (like some Omega fonts).
- Support for folding of comments was added.
- The `polish' language option of the babel LaTeX package as well as the
  `polski' LaTeX package are now supported.  Most notably this means
  that AUCTeX will help to insert quotation marks as defined by
  polish.sty ("`..."') and polski.sty (,,...'').
- There has been quite a number of bug fixes to various features and
  documentation across the board, most critical probably the tool bar.

Revision 1.31 / (download) - annotate - [select for diffs], Wed Oct 4 21:56:34 2006 UTC (16 years, 11 months ago) by wiz
Branch: MAIN
CVS Tags: pkgsrc-2006Q4-base, pkgsrc-2006Q4
Changes since 1.30: +2 -2 lines
Diff to previous 1.30 (colored)

Update MASTER_SITES and/or HOMEPAGE, from Sergey Svishchev.

Revision 1.30 / (download) - annotate - [select for diffs], Mon Jun 12 12:30:05 2006 UTC (17 years, 3 months ago) by tonio
Branch: MAIN
CVS Tags: pkgsrc-2006Q3-base, pkgsrc-2006Q3, pkgsrc-2006Q2-base, pkgsrc-2006Q2
Changes since 1.29: +2 -3 lines
Diff to previous 1.29 (colored)

Update print/auctex to 11.83

News in 11.83

   * The new function `TeX-doc' provides easy access to documentation
     about commands and packages or information related to TeX and
     friends in general.  It is accessible with the key binding `C-c ?'
     or the `Find Documentation...' entry in the mode menus.

   * You can now get rid of generated intermediate and output files by
     means of the new `Clean' and `Clean All' entries in
     `TeX-command-list' accessible with `C-c C-c' or the Command menu.

   * Support for forward search with PDF files was added.  That means
     you can jump to a place in the output file corresponding to the
     position in the source file.  Currently this only works if you use
     the pdfsync LaTeX package and xpdf as your PDF viewer.  The
     accuracy is in the range of +/-1 page.

     Adding support for this feature required the default value of the
     variable `TeX-output-view-style' to be changed.  Please make sure
     you either remove any customizations overriding the new default or
     incorporate the changes into your customizations if you want to
     use this feature.

   * TeX error messages of the `-file-line-error' kind are now
     understood in AUCTeX and preview-latex (parsers are still

   * Bug fix in XyMTeX support.

   * The LaTeX tool bar is now enabled by default.

Revision 1.29 / (download) - annotate - [select for diffs], Thu Apr 6 03:32:50 2006 UTC (17 years, 5 months ago) by jlam
Branch: MAIN
Changes since 1.28: +6 -11 lines
Diff to previous 1.28 (colored)

* Note that auctex requires the base emacs packages to be present.
* Move the info files to the PLIST and honor EMACS_INFOPREFIX.
* Remove some unused variables that are clearly just leftovers from an
  older version of this package.

Bump the PKGREVISION to 3.

Revision 1.28 / (download) - annotate - [select for diffs], Sat Mar 4 21:30:28 2006 UTC (17 years, 6 months ago) by jlam
Branch: MAIN
CVS Tags: pkgsrc-2006Q1-base, pkgsrc-2006Q1
Changes since 1.27: +2 -2 lines
Diff to previous 1.27 (colored)

Point MAINTAINER to in the case where no
developer is officially maintaining the package.

The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list).  Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't

Revision 1.27 / (download) - annotate - [select for diffs], Sun Feb 5 23:10:35 2006 UTC (17 years, 7 months ago) by joerg
Branch: MAIN
Changes since 1.26: +2 -2 lines
Diff to previous 1.26 (colored)

Recursive revision bump / recommended bump for gettext ABI change.

Revision 1.26 / (download) - annotate - [select for diffs], Fri Jan 13 22:59:44 2006 UTC (17 years, 8 months ago) by tonio
Branch: MAIN
Changes since 1.25: +3 -3 lines
Diff to previous 1.25 (colored)

Update print/auxtex to 11.82

News in 11.82
   * Support for the MinionPro LaTeX package was added.
   * Warnings and underfull/overfull boxes are now being indicated in
     the echo area after a LaTeX run, if the respective debugging
     options are activated with `TeX-toggle-debug-warnings' (`C-c C-t
     C-w') or `TeX-toggle-debug-bad-boxes' (`C-c C-t C-b').  In this
     case `TeX-next-error' will find these warnings in addition to
     normal errors.
     The key binding `C-c C-w' for `TeX-toggle-debug-bad-boxes' (which
     was renamed from `TeX-toggle-debug-boxes') now is deprecated.
   * AUCTeX now can automatically insert a pair of braces after typing
     <_> or <^> in math constructs if the new variable
     `TeX-electric-sub-and-superscript' is set to a non-nil value.
   * Some language-specific support for French was added.  There now is
     completion support for the commands provided by the `frenchb' (and
     `francais') options of the babel LaTeX package and easier input of
     French quotation marks (`\\og ...\\fg') which can now be inserted
     by typing <">.
   * Completion support for options of some LaTeX packages was added.
   * Handling of verbatim constructs was consolidated across AUCTeX.
     This resulted in the font-latex-specific variables
     `font-latex-verb-like-commands', `font-latex-verbatim-macros', and
     `font-latex-verbatim-environments' being removed and the more
     general variables `LaTeX-verbatim-macros-with-delims',
     `LaTeX-verbatim-macros-with-braces', and
     `LaTeX-verbatim-environments' being added.
   * The output of a BibTeX run is now checked for warnings and errors,
     which are reported in the echo area.
   * The aliases for `font-latex-title-fontify' were removed.  Use
     `font-latex-fontify-sectioning' instead.
   * The problem that Japanese macros where broken across lines was
   * Various bug fixes.

Revision 1.25 / (download) - annotate - [select for diffs], Thu Dec 29 06:22:06 2005 UTC (17 years, 8 months ago) by jlam
Branch: MAIN
Changes since 1.24: +1 -2 lines
Diff to previous 1.24 (colored)

Remove USE_PKGINSTALL from pkgsrc now that mk/install/
automatically detects whether we want the pkginstall machinery to be
used by the package Makefile.

Revision 1.24 / (download) - annotate - [select for diffs], Mon Dec 5 20:50:52 2005 UTC (17 years, 9 months ago) by rillig
Branch: MAIN
CVS Tags: pkgsrc-2005Q4-base, pkgsrc-2005Q4
Changes since 1.23: +3 -3 lines
Diff to previous 1.23 (colored)

Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

Revision 1.23 / (download) - annotate - [select for diffs], Mon Oct 17 16:17:22 2005 UTC (17 years, 11 months ago) by tonio
Branch: MAIN
Changes since 1.22: +4 -3 lines
Diff to previous 1.22 (colored)

Disable latex-preview, as it conflicts with teTeX3 (already in teTeX3)

Revision 1.22 / (download) - annotate - [select for diffs], Sat Oct 15 20:09:35 2005 UTC (17 years, 11 months ago) by tonio
Branch: MAIN
Changes since 1.21: +4 -3 lines
Diff to previous 1.21 (colored)

Update print/auctex to 11.81
This release contains preview-latex
(which install could be disabled by an option, but is it useful ?)
Many bugfixes, and support for different languages

Revision 1.21 / (download) - annotate - [select for diffs], Sun Aug 28 04:25:30 2005 UTC (18 years ago) by uebayasi
Branch: MAIN
CVS Tags: pkgsrc-2005Q3-base, pkgsrc-2005Q3
Changes since 1.20: +8 -2 lines
Diff to previous 1.20 (colored)


1) Simplify the way how an emacs version is picked when no emacs
   is installed, but a user try to install an Emacs Lisp package.
   Just pick up the version set as EMACS_TYPE than searching for
   versions already installed etc.  If the EMACS_TYPE version is
   not supported by the Emacs Lisp Package, just fail.  EMACS_TYPE
   be default to GNU Emacs 21.

   (In other words, users should set EMACS_TYPE as they want.
   Otherwise GNU Emacs 21 is used.)

2) All Emacs Lisp Packages *must* prepend EMACS_PKGNAME_PREFIX to
   a) the PKGNAME itself, and b) PKGNAME in its dependency lines.
   EMACS_PKGNAME_PREFIX is expanded to "xemacs-" when XEmacs is
   used.  This keeps dependency graph of Emacs-Lisp-packages-
   installed-for-XEmacs consistent.

3) Document EMACS_* variables as much as possible.

4) Provide more cookies for PLIST.  Maybe utilized later.

Note that the 2) change doesn't affect the default, GNU Emacs 21
behaviour.  So no version / revision bumps in this commit.

Revision 1.20 / (download) - annotate - [select for diffs], Mon Jun 27 10:03:54 2005 UTC (18 years, 3 months ago) by wiz
Branch: MAIN
Changes since 1.19: +5 -43 lines
Diff to previous 1.19 (colored)

Update to 11.55, provided by Antoine Reilles in PR 29816.

News in 11.55

   * A bug was fixed which lead to the insertion of trailing whitespace
     during filling.  In particular extra spaces were added to sentence
     endings at the end of lines.  You can make this whitespace visible
     by setting the variable `show-trailing-whitespace' to `t'.  If you
     want to delete all trailing whitespace in a buffer, type `M-x
     delete-trailing-whitespace RET'.

   * A bug was fixed which lead to a `*Compile-Log*' buffer popping up
     when the first LaTeX file was loaded in an Emacs session.

   * On some systems the presence of an outdated Emacspeak package lead
     to the error message `File mode specification error: (error
     "Variable binding depth exceeds max-specpdl-size")'.  Precautions
     were added which prevent this error from happening.  But
     nevertheless, it is advised to upgrade or uninstall the outdated
     Emacspeak package.

   * The value of `TeX-macro-global' is not determined during
     configuration anymore but at load time of AUCTeX.  Consequently the
     associated configuration option `--with-tex-input-dirs' was

   * Support for the LaTeX Japanese classes `jsarticle' and `jsbook'
     was added.

News in 11.54

   * The parser (used e.g. for `TeX-auto-generate-global') was extended
     to recognize keywords common in LaTeX packages and classes, like
     "\DeclareRobustCommand" or "\RequirePackage".  Additionally a bug
     was fixed which led to duplicate entries in AUCTeX style files.

   * Folding can now be done for paragraphs and regions besides single
     constructs and the whole buffer.  With the new `TeX-fold-dwim'
     command content can both be hidden and shown with a single key
     binding.  In course of these changes new key bindings for
     unfolding commands where introduced.  The old bindings are still
     present but will be phased out in future releases.

   * Info files of the manual now have a .info extension.

   * There is an experimental toolbar support now.  It is not activated
     by default.  If you want to use it, add
          (add-hook 'LaTeX-mode-hook 'LaTeX-install-toolbar)
     to your init file.

   * The manual now contains a new chapter "Quick Start".  It explains
     the main features and how to use them, and should be enough for a
     new user to start using AUCTeX.

   * A new section "Font Locking" was added to the manual which explains
     syntax highlighting in AUCTeX and its customization.  Together with
     the sections related to folding and outlining, the section is part
     of the new chapter "Display".

   * Keywords for syntax highlighting of LaTeX constructs to be typeset
     in bold, italic or typewriter fonts may now be customized.
     Besides the built-in classes, new keyword classes may be added by
     customizing the variable `font-latex-user-keyword-classes'.  The
     customization options can be found in the customization group

   * Verbatim content is now displayed with the `fixed-pitch' face. (GNU
     Emacs only)

   * Syntax highlighting should not spill out of verbatim content
     anymore. (GNU Emacs only)

   * Verbatim commands like `\verb|...|' will not be broken anymore
     during filling.

   * You can customize the completion for graphic files with

   * Support for the LaTeX packages `url', `listings', `jurabib' and
     `csquotes' was added with regard to command completion and syntax

   * Performance of fontification and filling was improved.

   * Insertion of nodes in Texinfo mode now supports completion of
     existing node names.

   * Setting the variable `LaTeX-float' to `nil' now means that you
     will not be prompted for the float position of figures and tables.
     You can get the old behaviour of `nil' by setting the variable to
     `""', i.e. an empty string.  See also *Note Floats::.

   * The XEmacs-specific bug concerning `overlays-at' was fixed.

   * Lots of bug fixes.

News in 11.53

   * The LaTeX math menu can include Unicode characters if your Emacs
     built supports it.  See the variable `LaTeX-math-menu-unicode',
     *Note Mathematics::.

   * Bug fixes for XEmacs.

   * Completion for graphic files in the TeX search path has been added.

   * `start' is used for the viewer for MikTeX and fpTeX.

   * The variable `TeX-fold-preserve-comments' can now be customized to
     deactivate folding in comments.

News in 11.52

   * Installation and menus under XEmacs work again (maybe for the first

   * Fontification of subscripts and superscripts is now disabled when
     the fontification engine is not able to support it properly.

   * Bug fixes in the build process.

News in 11.51

   * PDFTeX and Source Special support did not work with ConTeXt, this
     has been fixed.  Similar for Source Special support under Windows.

   * Omega support has been added.

   * Bug fixes in the build process.

   * `TeX-fold' now supports folding of environments in Texinfo mode.

News in 11.50

   * The use of source specials when processing or viewing the document
     can now be controlled with the new `TeX-source-specials' minor mode
     which can be toggled via an entry in the Command menu or the key
     binding `C-c C-t C-s'.  If you have customized the variable
     `TeX-command-list', you have to re-initialize it for this to work.
     This means to open a customization buffer for the variable by
     typing `M-x customize-variable RET TeX-command-list RET', selecting
     "Erase Customization" and do your customization again with the new

   * The content of the command menu now depends on the mode (plain TeX,
     LaTeX, ConTeXt etc.).  Any former customization of the variable
     `TeX-command-list' has to be erased.  Otherwise the command menu
     and the customization will not work correctly.

   * Support for hiding and auto-revealing macros, e.g. footnotes or
     citations, and environments in a buffer was added, *Note Folding::.

   * You can now control if indentation is done upon typing <RET> by
     customizing the variable `TeX-newline-function', *Note Indenting::.

   * Limited support for `doc.sty' and `ltxdoc.cls' (`dtx' files) was
     added.  The new docTeX mode provides functionality for editing
     documentation parts.  This includes formatting (indenting and
     filling), adding and completion of macros and environments while
     staying in comments as well as syntax highlighting.  (Please note
     that the mode is not finished yet.  For example syntax
     highlighting does not work yet in XEmacs.)

   * For macro completion in docTeX mode the AUCTeX style files
     `doc.el', `ltxdoc.el' and `ltx-base.el' were included.  The latter
     provides general support for low-level LaTeX macros and may be
     used with LaTeX class and style files as well.  It is currently
     not loaded automatically for those files.

   * Support for ConTeXt with a separate ConTeXt mode is now included.
     Macro definitions for completion are available in Dutch and

   * The filling and indentation code was overhauled and is now able to
     format commented parts of the source syntactically correct.  Newly
     available functionality and customization options are explained in
     the manual.

   * Filling and indentation in XEmacs with preview-latex and activated
     previews lead to the insertion of whitespace before multi-line
     previews.  AUCTeX now contains facilities to prevent this problem.

   * If `TeX-master' is set to `t', AUCTeX will now query for a master
     file only when a new file is opened.  Existing files will be left
     alone.  The new function `TeX-master-file-ask' (bound to `C-c _'
     is provided for adding the variable manually.

   * Sectioning commands are now shown in a larger font on display
     devices which support such fontification.  The variable
     `font-latex-title-fontify' can be customized to restore the old
     appearance, i.e. the usage of a different color instead of a
     change in size.

   * Support for `alphanum.sty', `beamer.cls', `booktabs.sty',
     `captcont.sty', `emp.sty', `paralist.sty', `subfigure.sty' and
     `units.sty'/`nicefrac.sty' was added.  Credits go to the authors
     mentioned in the respective AUCTeX style files.

   * Inserting graphics with `C-c RET \includegraphics RET' was
     improved.  See the variable `LaTeX-includegraphics-options-alist'.

   * If `LaTeX-default-position' is `nil', don't prompt for position
     arguments in Tabular-like environments, see *Note Tabular-like::.

   * Completion for available packages when using `C-c RET \usepackage
     RET' was improved on systems using the kpathsea library.

   * The commenting functionality was fixed.  The separate functions for
     commenting and uncommenting were unified in one function for
     paragraphs and regions respectively which do both.

   * Syntax highlighting can be customized to fontify quotes delimited
     by either >>German<< or <<French>> quotation marks by changing the
     variable `font-latex-quotes'.

   * Certain TeX/LaTeX keywords for functions, references, variables
     and warnings will now be fontified specially.  You may add your own
     keywords by customizing the variables
     `font-latex-match-variable-keywords' and

   * If you include the style files `german' or `ngerman' in a document
     (directly or via the `babel' package), you should now customize
     `LaTeX-german-open-quote', `LaTeX-german-close-quote' and
     `LaTeX-german-quote-after-quote' instead of `TeX-open-quote',
     `TeX-close-quote' and `TeX-quote-after-quote' if you want to
     influence the type of quote insertion.

   * Upon viewing an output file, the right viewer and command line
     options for it are now determined automatically by looking at the
     extension of the output file and certain options used in the
     source file.  The behavior can be adapted or extended respectively
     by customizing the variable `TeX-output-view-style'.

   * You can control whether `TeX-insert-macro' (`C-c RET') ask for all
     optional arguments by customizing the variable
     `TeX-insert-macro-default-style', *Note Completion::.

   * `TeX-run-discard' is now able to completely detach a process that
     it started.

   * The build process was enhanced and is now based on `autoconf'
     making installing AUCTeX a mostly automatic process.  See *Note
     Installation:: and *Note Installation under MS Windows:: for

News in 11.14

   * Many more LaTeX and LaTeX2e commands are supported.  Done by
     Masayuki Ataka

Revision 1.19 / (download) - annotate - [select for diffs], Fri Jun 17 03:50:30 2005 UTC (18 years, 3 months ago) by jlam
Branch: MAIN
CVS Tags: pkgsrc-2005Q2-base, pkgsrc-2005Q2
Changes since 1.18: +3 -1 lines
Diff to previous 1.18 (colored)

Create directories before installing files into them.

Revision 1.18 / (download) - annotate - [select for diffs], Sun May 22 20:08:27 2005 UTC (18 years, 4 months ago) by jlam
Branch: MAIN
Changes since 1.17: +2 -2 lines
Diff to previous 1.17 (colored)

Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions:

	awk		-> gawk
	m4		-> gm4
	make		-> gmake
	sed		-> gsed
	yacc		-> bison

Revision 1.17 / (download) - annotate - [select for diffs], Sat Jan 24 14:58:00 2004 UTC (19 years, 8 months ago) by grant
Branch: MAIN
CVS Tags: pkgsrc-2005Q1-base, pkgsrc-2005Q1, pkgsrc-2004Q4-base, pkgsrc-2004Q4, pkgsrc-2004Q3-base, pkgsrc-2004Q3, pkgsrc-2004Q2-base, pkgsrc-2004Q2, pkgsrc-2004Q1-base, pkgsrc-2004Q1
Changes since 1.16: +2 -2 lines
Diff to previous 1.16 (colored)

replace deprecated USE_GMAKE with USE_GNU_TOOLS+=make.

Revision 1.16 / (download) - annotate - [select for diffs], Sat Aug 9 11:20:36 2003 UTC (20 years, 1 month ago) by seb
Branch: MAIN
CVS Tags: pkgsrc-2003Q4-base, pkgsrc-2003Q4
Changes since 1.15: +1 -2 lines
Diff to previous 1.15 (colored)

USE_NEW_TEXINFO is unnecessary now.

Revision 1.15 / (download) - annotate - [select for diffs], Mon Aug 4 21:25:58 2003 UTC (20 years, 1 month ago) by seb
Branch: MAIN
Changes since 1.14: +5 -3 lines
Diff to previous 1.14 (colored)


Revision 1.14 / (download) - annotate - [select for diffs], Thu Jul 17 22:52:23 2003 UTC (20 years, 2 months ago) by grant
Branch: MAIN
Changes since 1.13: +2 -2 lines
Diff to previous 1.13 (colored)


Revision 1.13 / (download) - annotate - [select for diffs], Mon Jun 2 01:17:31 2003 UTC (20 years, 3 months ago) by jschauma
Branch: MAIN
Changes since 1.12: +2 -2 lines
Diff to previous 1.12 (colored)

Use tech-pkg@ in favor of packages@ as MAINTAINER for orphaned packages.
Should anybody feel like they could be the maintainer for any of thewe packages,
please adjust.

Revision 1.12 / (download) - annotate - [select for diffs], Sat Mar 1 03:49:50 2003 UTC (20 years, 6 months ago) by uebayasi
Branch: MAIN
Changes since 1.11: +2 -3 lines
Diff to previous 1.11 (colored)

* Remove dependency to teTeX.  Auctex can be installed fine without any teTeX
  installed.  This addresses PR20532 by Christopher Richards <richards plus
  netbsd at CS dot Princeton dot EDU>

* Fix compilation for FSF Emacs 20.7.

The resulting binary package will have a different dependency info, so
different package content, so revision bump.

Revision 1.11 / (download) - annotate - [select for diffs], Tue Jan 28 22:04:00 2003 UTC (20 years, 7 months ago) by jlam
Branch: MAIN
CVS Tags: netbsd-1-6-1-base, netbsd-1-6-1
Changes since 1.10: +3 -3 lines
Diff to previous 1.10 (colored)

Instead of including directly in a package Makefile,
have it be automatically included by if USE_PKGINSTALL is set
to "YES".  This enforces the requirement that be
included at the end of a package Makefile.  Idea suggested by Julio M.
Merino Vidal <jmmv at>.

Revision 1.10 / (download) - annotate - [select for diffs], Sat Jan 11 10:02:03 2003 UTC (20 years, 8 months ago) by uebayasi
Branch: MAIN
Changes since 1.9: +12 -10 lines
Diff to previous 1.9 (colored)

Update to 11.13.

Changes since 11.11 from the ChangeLog:

	* Makefile (STYLESRC): Add style/scrlttr2.el
	* style/scrbase.el: Added optional Argument "Pagenumber" to
	\maketitle.  Changed \textsubscript from `t' to "Text".
	* style/scrlttr2.el: Initial version.
	* style/scrbase.el: Added additional clearpage commands:
	\cleardoublestandardpage \cleardoubleplainpage and
	(LaTeX-common-initialization): Added 26 LaTeX commands, 2 LaTeX2e
	environments, and 41 LaTeX2e commands.
	* Makefile (STYLESRC): Add compilation targets for Komascript
	* Check in Komascript support by Mark Trettin.  See below.
	* scrbase.el:
	First attempt on implementing the `captionbeside'-Environment. I'm not
	really satisfied by now.
	* scrreprt.el, scrbook.el: Reformatted code.
	* scrbase.el:
	Changed `uppertitleback', `lowertitleback' from asking to just `t'
	* scrbase.el:
	Changed `addpart', `addsec' and `minisec' from Macro to sectioning
	* tex-buf.el (TeX-parse-TeX): Make subordinate files without
	major mode default to that of the calling file when doing error
	* tex.el (TeX-master-file): Don't make C-c ` bomb out in files
	like xxx.gls.  Probably a more elaborate way would be to export
	the TeX-master variable into files visited by error parsing.
	Could be incorrect, however, if more than one file included them.
	* latex.el (LaTeX-common-initialization): Set
	(LaTeX-mode-map): Don't bind M-q.
	Suggested by Nils Klarlund <>.

Revision 1.9 / (download) - annotate - [select for diffs], Mon Sep 16 03:31:26 2002 UTC (21 years ago) by uebayasi
Branch: MAIN
Changes since 1.8: +17 -19 lines
Diff to previous 1.8 (colored)

Update to auctex 11.11.

News in 11

   * Support for `prosper.sty', see <>.
     Contributed by Phillip Lord <>.

   * `comment-region' now inserts %% by default.  Suggested by "Davide
     G. M. Salvetti" <>.

   * You can now switch between using the `font-latex' (all emacsen),
     the `tex-font' (Emacs 21 only) or no special package for font
     locking.  Customize `TeX-install-font-lock' for this.

   * Now use -t landscape by default when landscape option appears.
     Suggested by Erik Frisk <>.

   * Use `tex-fptex.el' for fpTeX support.  Contributed by Fabrice
     Popineau <>.

   * New user option `LaTeX-top-caption-list' specifies environments
     where the caption should go at top.  Contributed by (Masayuki Ataka).

   * Allow explicit dimensions in `graphicx.sty'.  Contributed by (Masayuki Ataka).

   * Limited support for `verbatim.sty'.  Contributed by (Masayuki Ataka).

   * Better support for asmmath items.  Patch by (Masayuki Ataka).

   * More accurate error parsing.  Added by David Kastrup

   * Bug fixes.

Revision 1.8 / (download) - annotate - [select for diffs], Wed Mar 13 17:37:33 2002 UTC (21 years, 6 months ago) by fredb
Branch: MAIN
CVS Tags: pkgviews-base, pkgviews, netbsd-1-6-RELEASE-base, netbsd-1-6, netbsd-1-5-PATCH003, buildlink2-base, buildlink2
Changes since 1.7: +2 -1 lines
Diff to previous 1.7 (colored)

Give all packages which depend on "png" a version bump, and update
all dependencies on packages depending on "png" which contain shared
libraries, all for the (imminent) update to the "png" package.
[List courtesy of John Darrow, courtesy of "bulk-build".]

Revision 1.7 / (download) - annotate - [select for diffs], Mon Feb 18 15:14:37 2002 UTC (21 years, 7 months ago) by seb
Branch: MAIN
Changes since 1.6: +3 -2 lines
Diff to previous 1.6 (colored)

Introduce new framework for handling info files generation and installation.

Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/
    removal of USE_GTEXINFO
    `${INSTALL_INFO}' replace `install-info' in target rules
    print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
  makeinfo command usage

See -newly added by this commit- section 10.24 of Packages.txt for
further information.

Revision 1.6 / (download) - annotate - [select for diffs], Thu May 3 22:16:52 2001 UTC (22 years, 4 months ago) by jtb
Branch: MAIN
CVS Tags: netbsd-1-5-PATCH001
Changes since 1.5: +23 -21 lines
Diff to previous 1.5 (colored)

Add defaults for all instances of EVAL_PREFIX.

Revision 1.5 / (download) - annotate - [select for diffs], Thu Apr 19 22:23:45 2001 UTC (22 years, 5 months ago) by jtb
Branch: MAIN
Changes since 1.4: +7 -8 lines
Diff to previous 1.4 (colored)

Updated auctex to 10.0g.

News in 10.0

   * Disabled `LaTeX-hide-environment'.  Suggested by Christopher Allen

   * Changed default to lazy evaluation of `TeX-view-style' and
     `LaTeX-command-style'.  Suggested by Peter Neergaard

   * Backindent when brace is at the start of a line.  Patch by Masashi
     Shimbo <>.

   * Added Emacs 21 font lock support.

   * `,' and `.' no longer removes italic correction.

   * `graphicx' and `graphics' style support.  Donated by Ryuichi
     Arafune <>.

   * `LaTeX-math-abbrev-prefix' now accepts vector value.  Reported by
     Jan Vroonhof <>.

   * Improved Texinfo support(more environments and html).  Patch by
     Akim Demaille <>.

   * `danish' quotes support.  Suggested by (Arne

   * Some PDF support.

   * New `tex-mik.el' file for MikTeX support.

   * Some commands now have their own history.  Suggested by Werner
     LEMBERG <sx0005@sx2.HRZ.Uni-Dortmund.DE>.

   * Use `\centering' instead of center environment in figures.  Patch
     by Stefan Monnier <>.

   * New `dwim' setting for `TeX-master' attempts to guess a default
     master for new files.  Patch by Stefan Monnier <>.

   * `ngerman' style support.  Just a copy of the german style support.

   * Removed support for Emacs 18 and 19.

   * `mdwlist' support.  Patch by Stephen Heilbronner

   * Fixed various bugs with the babel package.

   * `amsart' and `amsbook' now loads `amsthm' by default.  Patch by
     Rune Kleveland <>.

   * Fixed bug with file searching.  Reported by Berwin Turlach

   * Finalized index support, added index-related style files.  Patch
     by Carsten Dominik <>.

   * New style files for `varioref.sty' and `fancyref.sty'.  Patch by
     Carsten Dominik <>.

   * `texmathp' recognizes additional macros like `\fbox'.  Patch by
     Ulrik Vieth <>.

Revision 1.4 / (download) - annotate - [select for diffs], Sat Apr 14 21:43:58 2001 UTC (22 years, 5 months ago) by jtb
Branch: MAIN
Changes since 1.3: +2 -2 lines
Diff to previous 1.3 (colored)

Change MAINTAINER section to

Revision 1.3 / (download) - annotate - [select for diffs], Thu Mar 1 18:50:05 2001 UTC (22 years, 6 months ago) by jtb
Branch: MAIN
Changes since 1.2: +41 -35 lines
Diff to previous 1.2 (colored)

Added support for XEmacs.

Revision 1.2 / (download) - annotate - [select for diffs], Sat Feb 17 17:51:37 2001 UTC (22 years, 7 months ago) by wiz
Branch: MAIN
Changes since 1.1: +2 -1 lines
Diff to previous 1.1 (colored)

Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.

Revision / (download) - annotate - [select for diffs] (vendor branch), Sat Dec 2 07:49:25 2000 UTC (22 years, 9 months ago) by jtb
Branch: TNF
CVS Tags: pkgsrc-base
Changes since 1.1: +0 -0 lines
Diff to previous 1.1 (colored)

Initial import of new "auctex" package:
Enhanced LaTeX mode for Emacs

Revision 1.1 / (download) - annotate - [select for diffs], Sat Dec 2 07:49:25 2000 UTC (22 years, 9 months ago) by jtb
Branch: MAIN

Initial revision

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.

CVSweb <>