CVS log for pkgsrc/misc/cksfv/distinfo

Up to [cvs.NetBSD.org] / pkgsrc / misc / cksfv

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

misc: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

The following distfiles could not be fetched (possibly fetched
conditionally?):

./misc/libreoffice/distinfo libreoffice/harfbuzz-2.6.4.tar.xz

misc: Remove SHA1 hashes for distfiles

cksfv: update to 1.3.15.

2020-10-10  Heikki Orsila <heikki.orsila@iki.fi>
	* Version 1.3.15
	- Generate a print-out of recursive list of files and sizes with -R
	  correctly

Add SHA512 digests for distfiles for misc category

Problems found locating distfiles:
	Package colorls: missing distfile ls.tar.gz
	Package molden: missing distfile molden-4.6/molden4.6.tar.gz
	Package softmaker-office-demo: missing distfile ofl06trial.tgz

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.

Update to 1.3.14. Set LICENSE. Convert to user-destdir.

2009-04-12  Heikki Orsila <heikki.orsila@iki.fi>
	* Version 1.3.14
        - Install the man page with proper permissions
        - Fix buffer underflow [CORRECTIVE]
        - Cleanup and fix sfv reading [CORRECTIVE] [PREVENTIVE]
        - Fix test script reporting [CORRECTIVE]
        - Consistent return value (1) for exit() [PREVENTIVE]

Update to 1.3.13:

2008-08-24  Heikki Orsila <heikki.orsila@iki.fi>
	* Version 1.3.13
	- Bug fixes
	- Documentation improvements

Update to 1.3.12:

2007-08-12  Heikki Orsila <heikki.orsila@iki.fi>
	* Version 1.3.12
	- Code cleanups
	- Documentation improvements
	- Added -g option that replaces -f in most cases. Instead of running
	      cksfv -C foo -f foo/bar.sfv
	  one can just run:
	      cksfv -g foo/bar.sfv

Update to 1.3.11:

2007-07-11  Heikki Orsila <heikki.orsila@iki.fi>
	* Version 1.3.11
	- Nautilus 2 CheckSFV script
	- 64 bit file offset support for some platforms

2007-07-11  Heikki Orsila <heikki.orsila@iki.fi>
	- Added a bash script (scripts/CheckSFV) for checking SFV files with
	  Nautilus 2. You can install the script manually by:

	     cp scripts/CheckSFV ~/.gnome2/nautilus-scripts/

	  Contributed by Mike Appelman <chokuchou@gmail.com>.

2007-05-24  Heikki Orsila <heikki.orsila@iki.fi>
	- Added -D_FILE_OFFSET_BITS=64 for some 32 bit platforms to
	  support files large files properly (Catalin Boie) [PERFECTIVE]
	  [ADAPTIVE]
	- Change log and version control log will from now use 1-4 tags,
	  which are: [PREVENTIVE], [PERFECTIVE], [ADAPTIVE] and
	  [CORRECTIVE]. [PREVENTIVE] means preventive maintenance actions,
	  such as assertions and self-tests. [PERFECTIVE] means actions
	  improving program quality or adding features.
	  [ADAPTIVE] means changes to adapt to certain run-time
	  environment. [CORRECTIVE] means bug fixes.

Update to 1.3.10:

2007-03-25  Heikki Orsila
	* Version 1.3.10
	- Added an option (-c) for remote programs to monitor sfv checking
	  more easily
	- MinGW fixes

2007-03-25  Heikki Orsila
	- Added -c option to force progress and final resolution prints
	  to stdout. See the man page.

2006-07-01  Heikki Orsila
	- Merged experimental support for MinGW build process from
	  Yar Tikhiy. I did some modifications
	  to the patch submitted by Yar and did not test the result,
	  so expect this doesn't work yet.
	- Fixed MinGW OS recognition in configure script (hopefully
	  works this time)

Update to 1.3.9:

2006-03-07  Heikki Orsila
	* Version 1.3.9
	- Fixed large file support for Solaris (Mark Niggemann)
	- Added an option that converts backslashes to slashes. It is useful
	  for checking sfv files generated by Windows systems. The feature
	  was implemented by Tero Halla-aho.

Update to 1.3.8:

2006-01-01  Heikki Orsila
	* Version 1.3.8
	- configure and Makefile cleanups and fixes.

2005-10-24  Heikki Orsila
	- Mike Frysinger pointed out several things about
	  the build procedure:
	  - -W/-O flags are useless in header checks in the configure script
	  - $compiler was not used for header checks in the configure script
	  - Cleaned CFLAGS handling so that if CFLAGS is set by the
	    environment, the default -O2 is stripped away from the
	    src/Makefile.in.

Depend on errno.h to provide errno.

Update to 1.3.7:
2005-10-23  Heikki Orsila
	* Version 1.3.7
	- Fixed INSTALL documentation. The INSTALL file documented the
	  old behaviour, where editing Makefile was required for installing
	  to an alternative path.
	- Fixed 'configure --help' to report usage properly. '--prefix dir' =>
	  '--prefix=dir'.
	- Shortened cksfv output to print only 2 lines to the beginning of a
	  newly created sfv file. cksfv version, date, time, and the project
	  web site URL.
	- A stack corruption and localtime error fix by
	  T. Farago
	- Added -b option to the command line help.

Update to 1.3.6:
2005-08-08  Heikki Orsila
        * version 1.3.6
        - Portability fix for Solaris (Stefan Alfredsson)

2005-08-03  Heikki Orsila <heikki.orsila@iki.fi>
        - A configure script bug was fixed that prevented inttypes.h from being
          detected if stdint.h doesn't exist. This bug seems affect some
          Solaris systems (they had inttypes.h but no stdint.h). Thanks to
          Stefan Alfredsson for the fix.
        - Added optimization into the configure script. Now inttypes.h is not
          checked if stdint.h exists.

Update to 1.3.5:
        * version 1.3.5
        - recursive SFV checking support by Travis Poppe
        - portability fix for OpenBSD

        * version 1.3.5-pre2
        - portable integer type #include fix for OpenBSD and possibly others.
          thanks to Daniel Kåkneryd for pointing out the problem. (shd)

        * version 1.3.5-pre1
        - (copied from 2005-05-11) feature that prints out sfv files with
          broken files and broken
          sfv files when recursive sfv checking is enabled. this is useful
          because print out in recursive mode can be long. one sees those
          sfv files that failed at the end of the output. Thanks to
          Travis Poppe for suggesting this feature (shd)
        - feature that prints out sfv files with broken files and broken
          sfv files when recursive sfv checking is enabled. this is useful
          because print out in recursive mode can be long. one sees those
          sfv files that failed at the end of the output. Thanks to
          Travis Poppe for suggesting this feature (shd)

Use .tar.bz2 file and add test target.

Update to 1.3.4:

2005-04-04  Heikki Orsila
        * version 1.3.4
	- compatibility fixes
	- recursive sfv file checking support by Durk van Veen

2005-03-26  Heikki Orsila
	- trivial fix for 'make check'. It wasn't posix sh compatible.
	  On bash "==" is the same as "=".

2005-03-26  Heikki Orsila
	* version 1.3.4-pre5
	- added recursion support from Durk van Veen

2005-03-21  Heikki Orsila
	- fixed 'make install' bug. Man dir was not created properly. Thanks
	  to Durk van Veen for finding this.

2005-02-21  Heikki Orsila
	* version 1.3.4-pre1
	- consistent policy for BSD and Linux systems. Trying to checksum a
	  directory lead to different actions. Also, trying to verify
	  checksum of a directory bugged.

2005-02-06  Heikki Orsila
        - 'make check' executes tests. 'make tests' doesn't.

Add RMD160 digests

Update to 1.3.3:
2005-03-04  Heikki Orsila
	* version 1.3.3
	- lots of changes. see previous changelog entries.

2005-03-04  Heikki Orsila
        - configure script now ignore unknown arguments (but gives a warning)
	- configure allows setting mandir and compiler. Examples:
	  --mandir=/usr/man
	  --compiler=/opt/experimental/gcc-4/bin/gcc
	- fixed wording in man file (Thomas Klausner)
	- -b option: print only basenames of the given files when creating
	  an sfv.

2005-03-03  Heikki Orsila
	- fixed O_LARGEFILE for macosx
	- Thomas Klausner submitted partial sfv checking patch by Dieter Baron.
	  Now cksfv -f foo.sfv [FILE1 FILE2 ...] checks only given FILES.
	- Thomas Klausner submitted patch by Tobias Nygren
	  to avoid calculating CRC twice per
	  file (read once, compute twice).

2005-02-03  Heikki Orsila
        * version 1.3.2
        - solaris printf workaround. use %lu tu print filesizes. works
	  best on 64-bit architectures (with compilers assuming sizeof(long)
	  == sizeof(size_t)). GNU/Linux support %zu which is the appropriate
	  modifier for this case, but can't have it everywhere.
	- doesn't print directory infos into catalogues when creating sfvs
	- see other modifications since 1.3.1 (many of them)

2005-01-26  Heikki Orsila
	- fixed output (displayed only 32-bit file sizes, and months wrong)
	  OLD:
	  ;    100663296  14:54.37 2005-00-25 zeros
	  NEW:
	  ;   4395630592  14:54.37 2005-01-25 zeros
	- lots of code cleanups
	- solaris fixes

2005-01-25  Heikki Orsila
	* no new version
        - Added and edited man page from Debian distribution
	- Fixed Makefile issues for -jx
	- Added a simple configure script for more consistent compilation
	- Removed b0rken rpm creation from Makefile
	- Removed spam messages (when creating and verifying checksums)
	- Added test cases (make tests)
	- added fake and lousy stdint.h generation (OS that don't have it
	  should be upgraded)

2005-01-24  Heikki Orsila
        * no new version
	- I decided to start maintaining the program since Bryan Call is
	  unreachable.

2004-05-25  Heikki Orsila
        * version 1.3.1
	- Fixed 64-bit issues. Went into Gentoo portage.

Apply patch from PR pkg/26330 by Tobias Nygren to make this work on
Alpha.

Fix compilation on Solaris, from Jonathan Perkin in PR 22887.

Fix off-by-one in date output. Bump PKGREVISION.

update cksfv to 1.3:
	Fixed the problem with case insensitive (ignoring case).
	Now will compile on RedHat 7.1.

Move to sha1 digests, and add distfile sizes.

+ move the distfile digest/checksum value from files/md5 to distinfo
+ move the patch digest/checksum values from files/patch-sum to distinfo