The NetBSD Project

CVS log for pkgsrc/mail/tmda/distinfo

[BACK] Up to [] / pkgsrc / mail / tmda

Request diff between arbitrary revisions

Default branch: MAIN

Revision 1.24 / (download) - annotate - [select for diffs], Tue Oct 26 10:54:33 2021 UTC (2 years, 1 month ago) by nia
Branch: MAIN
CVS Tags: pkgsrc-2023Q3-base, pkgsrc-2023Q3, pkgsrc-2023Q2-base, pkgsrc-2023Q2, pkgsrc-2023Q1-base, pkgsrc-2023Q1, pkgsrc-2022Q4-base, pkgsrc-2022Q4, pkgsrc-2022Q3-base, pkgsrc-2022Q3, pkgsrc-2022Q2-base, pkgsrc-2022Q2, pkgsrc-2022Q1-base, pkgsrc-2022Q1, pkgsrc-2021Q4-base, pkgsrc-2021Q4, HEAD
Changes since 1.23: +2 -2 lines
Diff to previous 1.23 (colored)

mail: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

The following distfiles were unfetchable (possibly fetched

./mail/qmail/distinfo netqmail-1.05-TAI-leapsecs.patch

Revision 1.23 / (download) - annotate - [select for diffs], Thu Oct 7 14:25:50 2021 UTC (2 years, 1 month ago) by nia
Branch: MAIN
Changes since 1.22: +1 -2 lines
Diff to previous 1.22 (colored)

mail: Remove SHA1 hashes for distfiles

Revision 1.22 / (download) - annotate - [select for diffs], Tue Nov 3 23:27:23 2015 UTC (8 years, 1 month ago) by agc
Branch: MAIN
CVS Tags: pkgsrc-2021Q3-base, pkgsrc-2021Q3, pkgsrc-2021Q2-base, pkgsrc-2021Q2, pkgsrc-2021Q1-base, pkgsrc-2021Q1, pkgsrc-2020Q4-base, pkgsrc-2020Q4, pkgsrc-2020Q3-base, pkgsrc-2020Q3, pkgsrc-2020Q2-base, pkgsrc-2020Q2, pkgsrc-2020Q1-base, pkgsrc-2020Q1, pkgsrc-2019Q4-base, pkgsrc-2019Q4, pkgsrc-2019Q3-base, pkgsrc-2019Q3, pkgsrc-2019Q2-base, pkgsrc-2019Q2, pkgsrc-2019Q1-base, pkgsrc-2019Q1, pkgsrc-2018Q4-base, pkgsrc-2018Q4, pkgsrc-2018Q3-base, pkgsrc-2018Q3, pkgsrc-2018Q2-base, pkgsrc-2018Q2, pkgsrc-2018Q1-base, pkgsrc-2018Q1, pkgsrc-2017Q4-base, pkgsrc-2017Q4, pkgsrc-2017Q3-base, pkgsrc-2017Q3, pkgsrc-2017Q2-base, pkgsrc-2017Q2, pkgsrc-2017Q1-base, pkgsrc-2017Q1, pkgsrc-2016Q4-base, pkgsrc-2016Q4, pkgsrc-2016Q3-base, pkgsrc-2016Q3, pkgsrc-2016Q2-base, pkgsrc-2016Q2, pkgsrc-2016Q1-base, pkgsrc-2016Q1, pkgsrc-2015Q4-base, pkgsrc-2015Q4
Changes since 1.21: +2 -1 lines
Diff to previous 1.21 (colored)

Add SHA512 digests for distfiles for mail category

Problems found locating distfiles:
	Package mutt: missing distfile patch-1.5.24.rr.compressed.gz
	Package p5-Email-Valid: missing distfile Email-Valid-1.198.tar.gz
	Package pine: missing distfile fancy.patch.gz
	Package postgrey: missing distfile targrey-0.31-postgrey-1.34.patch
	Package qmail: missing distfile badrcptto.patch
	Package qmail: missing distfile outgoingip.patch
	Package qmail: missing distfile qmail-1.03-realrcptto-2006.12.10.patch
	Package qmail: missing distfile qmail-smtpd-viruscan-1.3.patch
	Package thunderbird24: missing distfile enigmail-1.7.2.tar.gz
	Package thunderbird31: missing distfile enigmail-1.7.2.tar.gz

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.

Revision 1.21 / (download) - annotate - [select for diffs], Tue Jul 31 04:44:01 2007 UTC (16 years, 4 months ago) by schmonz
Branch: MAIN
CVS Tags: pkgsrc-2015Q3-base, pkgsrc-2015Q3, pkgsrc-2015Q2-base, pkgsrc-2015Q2, pkgsrc-2015Q1-base, pkgsrc-2015Q1, pkgsrc-2014Q4-base, pkgsrc-2014Q4, pkgsrc-2014Q3-base, pkgsrc-2014Q3, pkgsrc-2014Q2-base, pkgsrc-2014Q2, pkgsrc-2014Q1-base, pkgsrc-2014Q1, pkgsrc-2013Q4-base, pkgsrc-2013Q4, pkgsrc-2013Q3-base, pkgsrc-2013Q3, pkgsrc-2013Q2-base, pkgsrc-2013Q2, pkgsrc-2013Q1-base, pkgsrc-2013Q1, pkgsrc-2012Q4-base, pkgsrc-2012Q4, pkgsrc-2012Q3-base, pkgsrc-2012Q3, pkgsrc-2012Q2-base, pkgsrc-2012Q2, pkgsrc-2012Q1-base, pkgsrc-2012Q1, pkgsrc-2011Q4-base, pkgsrc-2011Q4, pkgsrc-2011Q3-base, pkgsrc-2011Q3, pkgsrc-2011Q2-base, pkgsrc-2011Q2, pkgsrc-2011Q1-base, pkgsrc-2011Q1, pkgsrc-2010Q4-base, pkgsrc-2010Q4, pkgsrc-2010Q3-base, pkgsrc-2010Q3, pkgsrc-2010Q2-base, pkgsrc-2010Q2, pkgsrc-2010Q1-base, pkgsrc-2010Q1, pkgsrc-2009Q4-base, pkgsrc-2009Q4, pkgsrc-2009Q3-base, pkgsrc-2009Q3, pkgsrc-2009Q2-base, pkgsrc-2009Q2, pkgsrc-2009Q1-base, pkgsrc-2009Q1, pkgsrc-2008Q4-base, pkgsrc-2008Q4, pkgsrc-2008Q3-base, pkgsrc-2008Q3, pkgsrc-2008Q2-base, pkgsrc-2008Q2, pkgsrc-2008Q1-base, pkgsrc-2008Q1, pkgsrc-2007Q4-base, pkgsrc-2007Q4, pkgsrc-2007Q3-base, pkgsrc-2007Q3, cwrapper, cube-native-xorg-base, cube-native-xorg
Changes since 1.20: +4 -4 lines
Diff to previous 1.20 (colored)

Update to 1.1.12. From the changelog:

* tmda-ofmipd now has native STARTTLS and SSL support courtesy of
  Stephen Warren. The new options are '--tls', '--ssl', '--ssl-key',
  and '--ssl-crt'. Note that the tlslite Python module needs to be
  installed to use this feature. For more information, see the
  "Builtin SSL/TLS" section of

* Fixed a minor bug that prevented the use of both SMTPSSL and
  SMTPAUTH together.

Revision 1.20 / (download) - annotate - [select for diffs], Mon Feb 26 03:44:21 2007 UTC (16 years, 9 months ago) by schmonz
Branch: MAIN
CVS Tags: pkgsrc-2007Q2-base, pkgsrc-2007Q2, pkgsrc-2007Q1-base, pkgsrc-2007Q1
Changes since 1.19: +5 -5 lines
Diff to previous 1.19 (colored)

Update to 1.1.11. From the changelog:

* The snapshot of the wiki documentation is now included within the
  main tmda-1.1.x.tgz tarball in the 'doc' directory rather than in a
  separate tmda-1.1.x-doc.tgz tarball.

* New feature courtesy of Vitor Espindola. A new configuration
  variable, TIMEOUT_UNITS, to give users the ability to customize the
  timeout unit value strings in the templates instead of using the
  English defaults of "years", "months", "weeks", "days", "hours",
  "minutes", and "seconds". For more information, see

* Virtual domain improvements to tmda-pending courtesy of Lloyd
  Zusman. A '--vhost-script' command-line option has been added to
  match tmda-ofmipd and tmda-filter. Also two new options have been
  added, '--vhost-user' and '--vhost-domain'. See the tmda-pending
  --help output for more information, or for greater detail, see

* An alternative "simpler" example of how to use TLS with tmda-ofmipd
  via stunnel has been added. See the contrib/ofmipd-stunnel-daemons/

* A bug that broke tmda-filter's '-e' command-line option has been

Revision 1.19 / (download) - annotate - [select for diffs], Fri Feb 2 13:08:20 2007 UTC (16 years, 10 months ago) by schmonz
Branch: MAIN
Changes since 1.18: +4 -5 lines
Diff to previous 1.18 (colored)

Update to 1.1.10 and take MAINTAINER. From the changelog:

* New feature. When a message is released from your pending queue via
  tmda-cgi, a new trace header 'X-TMDA-CGI' is added to the message
  which contains both the IP address of the remote host as well as the
  browser the client used to send the request.  This allows you to
  visually discern that the message was released via tmda-cgi rather
  than through email confirmation, and also allows for easier tracing.

* tmda-ofmipd has a new option courtesy of Robert P. Thille.  `-L'
  turns on logging prints which logs everything that `-d' logs, except
  for the raw SMTP protocol data. Hence, it is useful if you want to
  leave logging enabled permanently, but don't want your logs bloated
  with AUTH data and/or the content of large attachments.

* Various tmda-ofmipd bugfixes and improvements from Stephen Warren.

Revision 1.18 / (download) - annotate - [select for diffs], Thu Jan 11 19:22:43 2007 UTC (16 years, 10 months ago) by schmonz
Branch: MAIN
Changes since 1.17: +2 -1 lines
Diff to previous 1.17 (colored)

Avoid passing "-i" to qmail-inject: it's an invalid option and the
intended behavior is already the default. Fixes a longstanding
problem using TMDA with qmail. While here, mollify pkglint slightly.


Revision 1.17 / (download) - annotate - [select for diffs], Wed Dec 20 03:22:39 2006 UTC (16 years, 11 months ago) by schmonz
Branch: MAIN
CVS Tags: pkgsrc-2006Q4-base, pkgsrc-2006Q4
Changes since 1.16: +2 -1 lines
Diff to previous 1.16 (colored)

Fix authfile thinko in tmda-ofmipd. From TMDA SVN revision 2133,
via bug report and patch from Nathan Arthur. Bump PKGREVISION.

Revision 1.16 / (download) - annotate - [select for diffs], Tue Nov 7 07:42:09 2006 UTC (17 years, 1 month ago) by schmonz
Branch: MAIN
Changes since 1.15: +4 -4 lines
Diff to previous 1.15 (colored)

Update to 1.1.9 (approved by kim@). From the changelog:

* New feature courtesy of Mark Horn. ACTION_EXPIRED_DATED has been
  extended to support handling multiple ages of dated messages. So you
  could for example 'bounce' mail to dated addresses that have been
  expired for more than a week, 'hold' if longer than a month, and
  'drop' if over a year, while still setting the default behavior to
  'confirm'.  For more information and an illustrative example, see

* TMDA's internal copy of the Python email package has been upgraded
  to v4.0.1.

* The bin/tmda-* programs have been revamped to use Python's new
  'optparse' library.

* TMDA can now optionally store unconfirmed messages in a "Maildir"
  rather than in TMDA's custom pending queue format.  This allows you
  to use any mail reading program that supports Maildir to browse or
  search your pending queue, rather than the 'tmda-pending' and
  'tmda-cgi' programs, though the latter will still work.

* tmda-filter has a new command-line option, '-e/--environ' which you
  can use to add a VAR=value pair to the environment.  One example use
  of this is to allow TMDA to be setup as a Postfix transport.
  Contributed by Bernard Johnson.

* tmda-filter will defer incoming deliveries if the sticky bit is set
  on your home directory (as determined by the $HOME variable).  This
  allows you to safely edit the contents of ~/.tmda/ on a live system
  if you need to.

* tmda-ofmipd now has "one-session" mode through the '--one-session'
  command-line option, courtesy of Stephen Warren.  This allows you to
  use xinetd or tcpserver, possibly in conjunction with stunnel, to
  spawn tmda-ofmipd, rather than having tmda-ofmipd bind to a port and
  accept connections on its own.

* The new 'dot-tmda' directory in contrib contains a working ~/.tmda/
  structure that can be used with only a few changes.  See the README
  in that directory for more info.  Not documented yet outside of the
  README, but this might help new TMDA users get started quicker.

* Some of the tmda-* programs will now run on native win32
  (tmda-address, tmda-check-address, tmda-pending, and tmda-keygen).

* tmda-ofmipd has a new option (--pure-proxy) that can proxy mail for
  non-TMDA users in addition to TMDA users.  This might be useful if
  you run a mixed environment, and want to use tmda-ofmipd for
  everyone.  See `tmda-ofmipd --help' for more on this option.

* New feature from David Bremner.  Add 'shell=' and 'python=' tag
  actions to the outgoing filter.  This allows you to add
  dynamic/shell escaped headers from the outgoing filter file.  For
  example usage, see the TMDA/Hashcash HOWTO I've prepared at

* The template system has been reorganized to simplify things for
  users of multi-lingual templates among others.  See and the UPGRADE notes below.

* Messages are now simply deleted from your pending queue once they
  are confirmed or released rather than being renamed with a '3,C' or
  '3,R' suffix.  This provides simpler, more intuitive behavior and
  decreased storage requirements.

* Fixed a bug in TMDAINJECT that caused Message-ID and Date headers to
  differ when sending to multiple recipients.

* Fixes to the tmda.spec file that should allow RPMs to be built with
  Python 2.3.x.

* Tilde expansion is now done automatically for variables in
  /etc/tmdarc and ~/.tmda/config, so you no longer have to use
  os.path.expanduser() to do this yourself.  e.g,

  TEMPLATE_DIR = "~/.tmda/templates"

  now ``just works''.

* New 'whitelist' behavior for tmda-pending and tmda-cgi, controlled

* A new 'pipe-headers' incoming filter file source.  Identical to
  'pipe' except that it only pipes the headers to the program, instead
  of the headers + body.  This should offer greater performance and
  reliability when processing the message body isn't required.

* A new feature to add Mail-Followup-To headers from tmda-sendmail or
  tmda-ofmipd to messages.  See

Revision 1.15 / (download) - annotate - [select for diffs], Thu Feb 24 09:59:30 2005 UTC (18 years, 9 months ago) by agc
Branch: MAIN
CVS Tags: pkgsrc-2006Q3-base, pkgsrc-2006Q3, pkgsrc-2006Q2-base, pkgsrc-2006Q2, pkgsrc-2006Q1-base, pkgsrc-2006Q1, pkgsrc-2005Q4-base, pkgsrc-2005Q4, pkgsrc-2005Q3-base, pkgsrc-2005Q3, pkgsrc-2005Q2-base, pkgsrc-2005Q2, pkgsrc-2005Q1-base, pkgsrc-2005Q1
Changes since 1.14: +2 -1 lines
Diff to previous 1.14 (colored)

Add RMD160 digests.

Revision 1.14 / (download) - annotate - [select for diffs], Sun Jun 6 05:08:34 2004 UTC (19 years, 6 months ago) by schmonz
Branch: MAIN
CVS Tags: pkgsrc-2004Q4-base, pkgsrc-2004Q4, pkgsrc-2004Q3-base, pkgsrc-2004Q3, pkgsrc-2004Q2-base, pkgsrc-2004Q2
Changes since 1.13: +3 -3 lines
Diff to previous 1.13 (colored)

Update to 1.0.3. From the changelog:

* Fixed a small bug in the auto-response rate limiting code that
  choked on extremely long addresses.

* Fixed a small bug in the X-Primary-Address header handling code that
  was triggered by a broken MTA.

* Fixed a bug in TMDAINJECT that caused Message-ID and Date headers to
  differ when sending to multiple recipients.

* Fixed a bug that would cause pending message release to fail under
  certain MTAs (particularily Exim) if the envelope sender was null <>.

pkgsrc changes:
* Add rc.d script for tmda-ofmipd.
* Create "tofmipd" user for tmda-ofmipd.
* Require Python 2.2 or higher, as needed by tmda-ofmipd.
* Use to honor PKG_SYSCONFDIR.
* Set PKG_SYSCONFSUBDIR, as TMDA potentially has several config files.
* Use shell globs to simplify some definitions.
* Remove MESSAGE, as TMDA provides its own upgrade instructions.
* Pass one file at a time to install(1) for the benefit of some of our
    differently-abled platforms.

Revision 1.13 / (download) - annotate - [select for diffs], Wed Jan 28 00:12:53 2004 UTC (19 years, 10 months ago) by kim
Branch: MAIN
CVS Tags: pkgsrc-2004Q1-base, pkgsrc-2004Q1
Changes since 1.12: +3 -3 lines
Diff to previous 1.12 (colored)

Upgrade to the 1.0 release.

Revision 1.12 / (download) - annotate - [select for diffs], Tue Sep 23 01:57:18 2003 UTC (20 years, 2 months ago) by kim
Branch: MAIN
CVS Tags: pkgsrc-2003Q4-base, pkgsrc-2003Q4
Changes since 1.11: +3 -3 lines
Diff to previous 1.11 (colored)

Update to tmda-0.84

See share/doc/tmda/UPGRADE for important notes, or view the notes from
before upgrading.  There are too many changes to list here.

Revision 1.11 / (download) - annotate - [select for diffs], Thu Dec 12 04:38:30 2002 UTC (20 years, 11 months ago) by kim
Branch: MAIN
CVS Tags: netbsd-1-6-1-base, netbsd-1-6-1
Changes since 1.10: +3 -3 lines
Diff to previous 1.10 (colored)

Upgrade to tmda-0.65:

What's new?

* New feature: A new header called ``X-Primary-Address'' is now
  supported in order to reduce the amount of thinking and planning
  ahead you need to do when sending mail to a new correspondent who
  may or may not use a challenge/response system like
  TMDA. Essentially, this header allows a sender to specify the
  address he prefers be whitelisted once he confirms his first

  For more information, see the following URLs:


* New feature. You can customize the header lines displayed by
  tmda-pending in interactive mode by setting SUMMARY_HEADERS. See
  <URL:> for more

* New version of Josh Huber's tmda.el.

* Bugfixes.

Here are the new additions to UPGRADE:

* If you are using customized templates, you should replace
  %(envelope_sender)s with %(confirm_append_address)s in your
  confirm_request.txt. This is to support the new

* When doing program deliveries to procmail, you should no longer be
  using the ``-f'' option. e.g,

  DELIVERY = "|/usr/bin/procmail -f $SENDER ~/.procmailrc-tmda"


  DELIVERY = "|/usr/bin/procmail ~/.procmailrc-tmda"

* contrib/sample.tmdarc has been renamed contrib/sample.config.

Revision 1.10 / (download) - annotate - [select for diffs], Thu Nov 14 04:25:31 2002 UTC (21 years ago) by kim
Branch: MAIN
Changes since 1.9: +3 -3 lines
Diff to previous 1.9 (colored)

Upgrade to tmda-0.64:

* New feature. TEMPLATE_DIR_MATCH_SENDER provides a way to further
  specialize the template selection process. When enabled, TMDA looks
  for templates in a subdirectory of TEMPLATE_DIR that matches the
  sender address, and then increasingly general portions of the domain
  part of the address. For more information and an example, see

* tmda-pending now allows messages to be specified on standard input
  instead of the command line by using `-' instead of a message
  list. See ``tmda-pending -h'' for an example. Thanks to Michael
  S. Fischer for the patch.

Only accept Python 2.2, as the PLIST is incorrect for 2.1 (due to one
file failing to compile).

Revision 1.9 / (download) - annotate - [select for diffs], Mon Nov 11 05:28:07 2002 UTC (21 years ago) by schmonz
Branch: MAIN
Changes since 1.8: +3 -3 lines
Diff to previous 1.8 (colored)

Update to 0.63. From the changelog:

* Python version 2.1 or greater is now required.  Upgrade at

* When sending an auto response, a new configuration variable
  (AUTORESPONSE_INCLUDE_SENDER_COPY) is used to control whether a copy
  of the sender's message is included or not.  For available options,

  If you are using customized templates, you should remove the last
  few lines in each template which include the sender's copy.  For
  example, in confirm_request.txt:

  --- Enclosed is a copy of your message.


  Otherwise, you'll include two copies of the sender's message.

* When sending confirmation requests, Reply-To is now set from the
  confirm_request.txt template.  This is to allow the option to not
  include the confirmation address in a Reply-To header.

  If you use a customized confirm_request.txt, you'll need to add the
  following line to the top (header section) of your template:

  Reply-To: %(confirm_accept_address)s

Revision 1.8 / (download) - annotate - [select for diffs], Sat Aug 31 23:08:41 2002 UTC (21 years, 3 months ago) by schmonz
Branch: MAIN
Changes since 1.7: +3 -3 lines
Diff to previous 1.7 (colored)

Update to 0.61. From the changelog:

* New -A option for tmda-ofmipd to allow authentication against
  checkpassword compatible programs such as checkpassword-pam

* New -C option for tmda-ofmipd to set a limit on the number of
  simultaneous connections.  Default is 20.

* tmda-ofmipd general bugfixes and security improvements.

* New config variable, `X_TMDA_IN_SUBJECT' which turns on parsing of
  the Subject header for X-TMDA override actions.  See description in for more information.

* New config variable, `ADDED_HEADERS_SERVER' which allows you to add
  arbitrary headers to all server-sent (i.e, tmda-filter) messages.

* Josh Huber's tmda.el, an elisp module for integrating TMDA with Gnus
  and Message mode, has been added to the contrib directory.  This is
  super-cool, Jason sez check it out!

* Major improvements to the filter file language, courtesy of Tim,

   - The addition of "macro" definition and expansion.
   - The addition of variable interpolation.
   - A new argument, `-optional', for all rules that access files.
   - Support for nested filter files with the 'include' statement.

   For more information on these new features, see the updated TMDA
   Filter Specification (

* Logging capability for client-side message (i.e, those sent with
  tmda-sendmail).  Set LOGFILE_OUTGOING in your config to enable this.

* New version of tmda.el.

* Fixed a bug which prevented the `from/to-mailman' filter sources
  from working.

Revision 1.7 / (download) - annotate - [select for diffs], Tue Jul 23 20:05:47 2002 UTC (21 years, 4 months ago) by schmonz
Branch: MAIN
CVS Tags: netbsd-1-6-RELEASE-base, netbsd-1-6
Changes since 1.6: +3 -3 lines
Diff to previous 1.6 (colored)

Update to 0.58.

Changes to the package itself:

- Change iterator variables to something other than "file" to
  placate pkglint.

From the changelog:

* 'keyword' addresses now use an identifying string like 'dated' and
  'sender' addresses do.  'keyword' by default, and customizable via
  TAGS_KEYWORD.  This means you'll need to generate new addresses
  using `tmda-address', as your old ones will no longer work.

  If you want your old keyword addresses to be accepted until you can
  transition to the new format, you can add entries for them in your

  to ok
  to ok

* RECIPIENT_DELIMITER is no longer allowed to be part of the keyword
  in a keyword address.  `?' will be substituted for it when a new
  keyword address is created.

* The format for a confirmation request address is now:

  RECIPIENT-confirm-TIMESTAMP.PID.HMAC, instead of

  The new format is detailed in CRYPTO.  Because of this change, it's
  recommended that you run tmda-pending to make sure your queue is
  free of legitimate messages, since the old confirmation addresses
  will no longer work.

  If you are unable to do this and need temporary backward
  compatibility with the old format, there is a patch against 0.56
  available at:

* Confirmed messages are now reinjected to the original envelope
  recipient address (RECIPIENT) rather than to:

  See CRYPTO for more details.

* TMDA now sends outgoing mail by handing it off to an SMTP server
  instead of the /usr/sbin/sendmail program.  By default it will use
  the standard SMTP port (25) on the local host.  You can modify this
  by setting the "SMTPHOST" variable in your tmdarc.  See
  TMDA/ for further information.

* tmdarc variable SENDMAIL has been renamed SENDMAIL_PROGRAM, but is
  irrelevant unless OUTGOINGMAIL = "sendmail".

* tmdarc variable PURGED_HEADERS now lists "Bcc:" and "Resent-Bcc" by
  default.  If you define this variable in your tmdarc, be sure to add
  these two headers.

* CRYPT_KEY should be removed from ~/.tmdarc or ~/.tmda/config.  Your
  secret key is now read from CRYPT_KEY_FILE, which defaults to
  ~/.tmda/crypt_key.  To make this conversion, move your existing
  CRYPT_KEY to ~/.tmda/crypt_key, but without the double-quotes.  e.g,

  if CRYPT_KEY = "df7a18a8d95f02ff94bf6463a8ec214cf20cb9e8"

  ~/.tmda/crypt_key should contain:

* ~/.tmdarc and ~/.tmda/config are no longer checked for file
  permissions.  Instead, make sure ~/.tmda/crypt_key is chmod 400 or
  600 (or 640 if ALLOW_MODE_640 = 1).

* An exception is no longer be raised if ~/.tmdarc or ~/.tmda/config
  is missing.  However, a ~/.tmda/crypt_key file is required.

* tmda-keygen now outputs an unquoted key instead of a CRYPT_KEY line.

* Template variables dated_cookie_address and sender_cookie_address
  were replaced with dated_recipient_address and
  sender_recipient_address, which are based on the RECIPIENT address.

Revision / (download) - annotate - [select for diffs], Sun Jun 23 18:52:28 2002 UTC (21 years, 5 months ago) by jlam
Branch: buildlink2
Changes since 1.4: +3 -3 lines
Diff to previous 1.4 (colored) next main 1.5 (colored)

Merge from pkgsrc-current to buildlink2 branch.

Revision 1.6 / (download) - annotate - [select for diffs], Tue May 14 14:38:56 2002 UTC (21 years, 6 months ago) by schmonz
Branch: MAIN
CVS Tags: pkgviews-base, pkgviews, buildlink2-base
Changes since 1.5: +3 -3 lines
Diff to previous 1.5 (colored)

Update to 0.55. Changes:

* Tighter integration of the local delivery code.  An external LDA
  like procmail is now required only if you are running Sendmail.
  Further, if you are driving TMDA with procmail, you no longer need
  to maintain a second procmailrc (e.g, ~/.procmailrc-tmda) for final

* Improvements to the mailing list filter file sources.

* Bugfixes.

Revision 1.5 / (download) - annotate - [select for diffs], Sun May 12 15:01:59 2002 UTC (21 years, 6 months ago) by schmonz
Branch: MAIN
Changes since 1.4: +3 -3 lines
Diff to previous 1.4 (colored)

Update to 0.54. Changes:

* New ``--terse-summary'' option to tmda-pending which can be used as
  an alternative to ``--summary''.  See ``tmda-pending -h'' for more.

  which define filenames to which the sender address will be appended
  when a message is deleted or released by tmda-pending.  This can be
  used for example to update your white/blacklist from tmda-pending.

* In addition to ~/.tmdarc, ~/.tmda/config is now a valid location for
  your TMDA configuration file.

* Performance improvements.

* Bugfixes.

Revision 1.4 / (download) - annotate - [select for diffs], Tue Apr 23 19:26:34 2002 UTC (21 years, 7 months ago) by schmonz
Branch: MAIN
Branch point for: buildlink2
Changes since 1.3: +3 -3 lines
Diff to previous 1.3 (colored)

Update to 0.52:

* Fix a bug in tmda-pending that would result in delivered messages
  being skipped during batch/delete (-bd) runs.

Revision 1.3 / (download) - annotate - [select for diffs], Sun Apr 7 06:56:34 2002 UTC (21 years, 8 months ago) by schmonz
Branch: MAIN
CVS Tags: netbsd-1-5-PATCH003
Changes since 1.2: +3 -3 lines
Diff to previous 1.2 (colored)

Update to 0.51. From the changelog:

* Messages in the pending directory are no longer deleted after they
  are confirmed (or released) and delivered.  Now they are simply
  noted in the DELIVERED_CACHE file.

* BOUNCE_TEXT_ALREADY_CONFIRMED has been deprecated.

* The confirm_accept.txt template has been modified.  The message body
  of the notification is no longer hardcoded, but rather stored in
  %(confirm_accept_text)s, which comes from one of the following
  tmdarc variables depending on context:


* Custom templates are now referred to by a template directory rather
  than individually.  Any templates found in this directory will be
  used, otherwise the default templates will be used.  You can specify
  a custom template directory in one of two ways:

  A TEMPLATE_DIR setting in your tmdarc.  This replaces use of

  tmda-filter's -t option, which replaces both -A and -R.

* The 'unquoted' and 'parens' options to MESSAGE_FROM_STYLE have been
  deprecated.  'angles' now double-quotes the fullname only when

Revision 1.2 / (download) - annotate - [select for diffs], Thu Mar 14 17:24:19 2002 UTC (21 years, 8 months ago) by wiz
Branch: MAIN
Changes since 1.1: +3 -3 lines
Diff to previous 1.1 (colored)

Update to 0.48, provided by Amitai Schlair in pkg/15783.
* TMDA has acquired the ability to handle local mail delivery itself.
  It can now do safe and reliable delivery to qmail-style Maildirs and
  mboxrd-format mboxes, as well as program (pipe) delivery, and
  forward to a different e-mail address.
* Added an -autodbm argument to the 'from-file' and 'to-file' filter
  sources to match the existing -autocdb capability.  -autodbm
  automatically maintains a DBM file for the specified TMDA list file.
  No more rebuilding your DBM files by hand, cron, or scripting.
* Added the ability to use 'from*' rules in outgoing filters.
  See the TMDA Filter Specification for details.
* Lots of internal reorganization.

Revision / (download) - annotate - [select for diffs] (vendor branch), Thu Feb 14 13:00:25 2002 UTC (21 years, 9 months ago) by drochner
Branch: TNF
CVS Tags: pkgsrc-base
Changes since 1.1: +0 -0 lines
Diff to previous 1.1 (colored)

import of tmda-0.46, a Python-based SPAM reduction system, submitted by
Amitai Schlair per PR pkg/15075

Revision 1.1 / (download) - annotate - [select for diffs], Thu Feb 14 13:00:25 2002 UTC (21 years, 9 months ago) by drochner
Branch: MAIN

Initial revision

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.

CVSweb <>