# $NetBSD: module.mk,v 1.74 2019/11/03 19:04:05 rillig Exp $
#
# This Makefile fragment is intended to be included by packages that build
# and install perl5 modules.
#
# The following targets are provided by this file:
#
# perl5-configure runs the standard perl configuration in
# each of the directories specified in
# ${PERL5_CONFIGURE_DIRS}.
#
# do-configure runs the perl5-configure target; if PERL5_CONFIGURE
# is set to "YES", then this target overrides the
# default do-configure provided by bsd.pkg.mk.
#
# The following variables may be set prior to including this file:
#
# PERL5_CONFIGURE if "YES", then for do-configure, run the standard
# perl configuration assuming Makefile.PL exists;
# defaults to "YES".
#
# PERL5_CONFIGURE_DIRS list of directories in which to run the
# standard perl configuration; defaults to
# ${CONFIGURE_DIRS}.
#
# PERL5_LDFLAGS extra linker flags to pass on to the build
# process.
#
# PERL5_MODULE_TYPE "MakeMaker", "Module::Build", "Module::Build::Bundled",
# "Module::Build::Tiny", "Module::Install", or
# "Module::Install::Bundled" depending on which framework
# is used to build/install the module.
#
# See also:
# PERL5_PACKLIST
#
# Keywords: perl perl5
.include "../../lang/perl5/license.mk"
.if !defined(PERL5_MODULE_MK)
PERL5_MODULE_MK= # defined
.include "../../mk/bsd.prefs.mk"
PERL5_MODULE_TYPE?= MakeMaker
.if (${PERL5_MODULE_TYPE} != "MakeMaker") && \
(${PERL5_MODULE_TYPE} != "Module::Build") && \
(${PERL5_MODULE_TYPE} != "Module::Build::Bundled") && \
(${PERL5_MODULE_TYPE} != "Module::Build::Tiny") && \
(${PERL5_MODULE_TYPE} != "Module::Install") && \
(${PERL5_MODULE_TYPE} != "Module::Install::Bundled")
PKG_FAIL_REASON+= "\`\`${PERL5_MODULE_TYPE}'' is not a supported PERL5_MODULE_TYPE."
.endif
# Default test target for Perl modules
TEST_TARGET?= test
.include "../../mk/compiler.mk"
.if ${PERL5_MODULE_TYPE} == "Module::Build" || \
${PERL5_MODULE_TYPE} == "Module::Build::Bundled" || \
${PERL5_MODULE_TYPE} == "Module::Build::Tiny"
PERL5_MODTYPE= modbuild
PERL5_MODBUILD_DESTDIR_OPTION= --destdir ${DESTDIR:Q}
.elif ${PERL5_MODULE_TYPE} == "Module::Install" || \
${PERL5_MODULE_TYPE} == "Module::Install::Bundled"
PERL5_MODTYPE= modinst
.elif ${PERL5_MODULE_TYPE} == "MakeMaker"
PERL5_MODTYPE= makemaker
.endif
###########################################################################
###
### Add the proper dependencies for using the specified module build
### system.
###
BUILDLINK_DEPMETHOD.perl+= full
.include "../../lang/perl5/buildlink3.mk"
.if empty(PKGPATH:Mdevel/p5-Module-Build) && \
(${PERL5_MODULE_TYPE} == "Module::Build")
BUILD_DEPENDS+= p5-Module-Build>=0.42050:../../devel/p5-Module-Build
.endif
.if empty(PKGPATH:Mdevel/p5-Module-Build-Tiny) && \
(${PERL5_MODULE_TYPE} == "Module::Build::Tiny")
BUILD_DEPENDS+= p5-Module-Build-Tiny>=0.23:../../devel/p5-Module-Build-Tiny
.endif
.if empty(PKGPATH:Mdevel/p5-Module-Install) && \
(${PERL5_MODULE_TYPE} == "Module::Install")
BUILD_DEPENDS+= p5-Module-Install>=0.91:../../devel/p5-Module-Install
.endif
###########################################################################
###
### Target definitions (configure, build, install, etc.)
###
PERL5_CONFIGURE?= yes
PERL5_CONFIGURE_DIRS?= ${CONFIGURE_DIRS}
MAKE_ENV+= LC_ALL=C
MAKE_ENV+= PERL_MM_USE_DEFAULT=1
# All pkgsrc-installed Perl modules are installed into the "vendor"
# directories.
#
MAKE_PARAMS.makemaker+= INSTALLDIRS=vendor
MAKE_PARAMS.modbuild+= --installdirs=vendor
MAKE_PARAMS.modinst+= installdirs=vendor
MAKE_PARAMS+= ${MAKE_PARAMS.${PERL5_MODTYPE}}
.PHONY: do-makemaker-configure
do-makemaker-configure:
${RUN} \
for dir in ${PERL5_CONFIGURE_DIRS}; do \
cd ${WRKSRC}; \
if ${TEST} -f "$$dir"/Makefile.PL; then \
cd "$$dir"; \
${SETENV} ${MAKE_ENV} \
${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL ${MAKE_PARAMS}; \
fi; \
done
.PHONY: do-modbuild-configure
do-modbuild-configure:
${RUN} \
for dir in ${PERL5_CONFIGURE_DIRS}; do \
cd ${WRKSRC}; \
if ${TEST} -f "$$dir"/Build.PL; then \
cd "$$dir"; \
${SETENV} ${MAKE_ENV} \
${BUILDLINK_PREFIX.perl}/bin/perl Build.PL ${MAKE_PARAMS}; \
fi; \
done
.PHONY: do-modinst-configure
do-modinst-configure:
.if ${PERL5_MODULE_TYPE} == "Module::Install"
${RUN} \
for dir in ${PERL5_CONFIGURE_DIRS}; do \
cd ${WRKSRC}; \
if ${TEST} -d "$$dir"/inc/Module; then \
${RM} -rf "$$dir"/inc/Module; \
fi; \
if ${TEST} -f "$$dir"/Makefile.PL; then \
cd "$$dir"; \
${SETENV} ${MAKE_ENV} \
${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL --skipdeps ${MAKE_PARAMS}; \
fi; \
done
.else
${RUN} \
for dir in ${PERL5_CONFIGURE_DIRS}; do \
cd ${WRKSRC}; \
if ${TEST} -f "$$dir"/Makefile.PL; then \
cd "$$dir"; \
${SETENV} ${MAKE_ENV} \
${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL --skipdeps ${MAKE_PARAMS}; \
fi; \
done
.endif
.PHONY: perl5-configure
perl5-configure: do-${PERL5_MODTYPE}-configure
.if !empty(PERL5_CONFIGURE:M[yY][eE][sS])
do-configure: perl5-configure
.endif
.PHONY: do-modbuild-build
do-modbuild-build:
cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build ${BUILD_PARAMS}
.PHONY: do-modbuild-test
do-modbuild-test:
cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build test ${BUILD_PARAMS}
.PHONY: do-modbuild-install
do-modbuild-install:
cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build install ${PERL5_MODBUILD_DESTDIR_OPTION} ${BUILD_PARAMS}
.if target(do-${PERL5_MODTYPE}-build) && !defined(NO_BUILD)
do-build: do-${PERL5_MODTYPE}-build
do-test: do-${PERL5_MODTYPE}-test
.endif
.if target(do-${PERL5_MODTYPE}-install)
do-install: do-${PERL5_MODTYPE}-install
.endif
###########################################################################
###
### Make variable overrides
###
# MakeMaker provides two hooks, OPTIMIZE and OTHERLDFLAGS, to
# customize the arguments passed to the preprocessor and linker,
# respectively.
#
PERL5_MAKE_FLAGS.makemaker+= OPTIMIZE=${CFLAGS:Q}" "${CPPFLAGS:Q}
.if ${OBJECT_FMT} == "a.out"
PERL5_MAKE_FLAGS.makemaker+= OTHERLDFLAGS=${LDFLAGS:S/-Wl,//g:Q}
.else
PERL5_MAKE_FLAGS.makemaker+= OTHERLDFLAGS=${LDFLAGS:Q}
.endif
# Repoint all of the vendor-specific variables to be under the perl5
# module's ${PREFIX}.
#
.include "../../lang/perl5/vars.mk"
.for _var_ in ${_PERL5_VARS}
PERL5_MAKE_FLAGS.makemaker+= ${_var_}=${PERL5_${_var_}:Q}
.endfor
#
# The PREFIX in the generated Makefile will point to ${PERL5_PREFIX},
# so override its value to the module's ${PREFIX}.
# Also, set VENDORARCHEXP, so existing .packlist won't be read.
#
PERL5_MAKE_FLAGS.makemaker+= PREFIX=${PREFIX:Q} VENDORARCHEXP=${DESTDIR}${PERL5_INSTALLVENDORARCH}
PERL5_MAKE_FLAGS+= ${PERL5_MAKE_FLAGS.${PERL5_MODTYPE}}
MAKE_FLAGS+= ${PERL5_MAKE_FLAGS}
.if defined(PERL5_LDFLAGS) && !empty(PERL5_LDFLAGS)
#FIX_RPATH+= PERL5_LDFLAGS
LDFLAGS+= ${PERL5_LDFLAGS}
.endif
.include "../../lang/perl5/packlist.mk"
.endif # PERL5_MODULE_MK
CVSweb <webmaster@jp.NetBSD.org>