CVS log for pkgsrc/graphics/py-imagingtk/Attic/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / graphics / py-imagingtk

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

py-imagingtk: removed

Omit mentions of python 34 and 35, after those were removed.

- Includes some whitespace changes, to be handled in a separate commit.

extend PYTHON_VERSIONS_ for Python 3.7

Recursive bumps for fontconfig and libzip dependency changes.

graphics/*: remove redundant :Q modifiers

pkgsrc doesn't support PREFIX with spaces or other special characters.
Therefore it is not necessary to add the :Q modifier to this variable
and several others.

Add python-3.6 to incompatible versions.

Remove python33: adapt all packages that refer to it.

Extend PYTHON_VERSIONS_INCOMPATIBLE to 35

Mark packages that are not ready for python-3.3 also not ready for 3.4,
until proven otherwise.

Do not install egg file after all, same file installed by py-imaging

Convert to distutils.mk. Mark as not for python-3.x.
Bump PKGREVISION.

Revbump after updating tcl/tk.

Needs tk.

Try to fix the fallout caused by the fix for PR pkg/47882. Part 3:

Recursively bump package revisions again after the "freetype2" and
"fontconfig" handling was fixed.

Replace py-Tk/buildlink3.mk with DEPENDS.

There are no buildlink3-relevant files here, just a loadable module.

Bump freetype2 and fontconfig dependencies to current pkgsrc versions,
to address issues with NetBSD-6(and earlier)'s fontconfig not being
new enough for pango.

While doing that, also bump freetype2 dependency to current pkgsrc
version.

Suggested by tron in PR 47882

Revbump after graphics/jpeg and textproc/icu

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Recursive PKGREVISION bump for tcl and tk upgrade to 8.5.12

Second try at jpeg-8 recursive PKGREVISION bump.

sync w/ base pkg

bump revision because of graphics/jpeg update

update to 1.1.6
changes:
+ Added buffer interface support to the Path constructor
+ Added new ImageMath module.
+ Added pixel access object
+ Added support for duplex scanning to the Sane interface
+ Added save support for Spider images
+ Added float/double support to the TIFF loader
+ Added NumPy array interface support
+ Added experimental "floodfill" function to the ImageDraw module
+ Added threading support for the Sane driver
-bugfixes

Whitespace cleanup, courtesy of pkglint.
Patch provided by Sergey Svishchev in private mail.

Over 1200 files touched but no revisions bumped :)

RECOMMENDED is removed. It becomes ABI_DEPENDS.

BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.

BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.

BUILDLINK_DEPENDS does not change.

IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".

Added to obsolete.mk checking for IGNORE_RECOMMENDED.

I did not manually go through and fix any aesthetic tab/spacing issues.

I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.

I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.

As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.

As discussed on tech-pkg.

I will commit to revbump, pkglint, pkg_install, createbuildlink separately.

Note that if you use wip, it will fail!  I will commit to pkgsrc-wip
later (within day).

Point MAINTAINER to pkgsrc-users@NetBSD.org in the case where no
developer is officially maintaining the package.

The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list).  Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.

Recursive revision bump / recommended bump for gettext ABI change.

Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

    http://mail-index.netbsd.org/tech-pkg/2005/12/02/0034.html

update to 1.1.5
changes:
+ Runs under Python 1.5.2 and newer, including 2.4.  You may need
  additional libraries to build under 1.5.2; see instructions below.
+ New build procedure.  The setup.py file now configures and builds
  the core library as well as the bindings, in one step.
+ Added stub drivers for BUFR, FITS, GRIB, HDF5, and WMF files.
  Stub drivers can identify the file format, but relies on
  application-provided drivers to read or write images in that
  format.
+ Added experimental "LA" mode support. An "LA" image is an "L"
  image with an attached transparency layer.
+ Added "RankFilter", "MinFilter", "MedianFilter", and "MaxFilter"
  classes to the ImageFilter module.
+ Improved support for applications using multiple threads on
  systems with multiple processors and/or hyperthreading processors.
+ Added EXIF GPSInfo read support for JPEG files.
+ Lots of bug fixes and performance tweaks.

pkgsrc note: freetype and tiff support isn't built yet, should be
separate pkgs

Massive cleanup of buildlink3.mk and builtin.mk files in pkgsrc.
Several changes are involved since they are all interrelated.  These
changes affect about 1000 files.

The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk.  bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files.  Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred.  This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.

The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages.  Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc.  This modification is a nod toward LOCALBASE=/usr.  The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.

The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc.  The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.

The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files.  Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories.  These files are used as input
to imake since imake can't use stdin for that purpose.

The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead.  This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed.  Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries.  Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Libtool fix for PR pkg/26633, and other issues.  Update libtool to 1.5.10
in the process.  (More information on tech-pkg.)

Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.

Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.

add python as category
ok'd a while back at pkgsrcCon by agc and wiz

Convert to buildlink3.

catch up with py-imaging - use distutils and don't depend strictly
on Python-2.0 anymore

s/netbsd.org/NetBSD.org/

Use tech-pkg@ in favor of packages@ as MAINTAINER for orphaned packages.
Should anybody feel like they could be the maintainer for any of thewe packages,
please adjust.

+USE_X11.

switch to buildlink2

Strip the ".buildlink" from the names of the python application and
extension Makefile fragments, because they really don't have anything to
do with the buildlink[12] frameworks.  Change all the Makefiles that use
application.buildlink.mk and extension.buildlink.mk to use application.mk
and extension.mk instead.

update to 1.1.2
Changes:
+ Adapted to Python 2.1.  Among other things, all uses of the
  "regex" module has been repleased with "re".
+ Fixed attribute error when reading large PNG files (this bug
  was introduced in maintenance code released after the 1.1.1
  release)
+ Ignore non-string objects in sys.path
+ Fixed Image.transform(EXTENT) for negative xoffsets
+ Fixed loading of image plugins if PIL is installed as a package.
  (The plugin loader now always looks in the directory where the
  Image.py module itself is found, even if that directory isn't on
  the standard search path)
+ The Png plugin has been added to the list of preloaded standard
  formats
+ Fixed bitmap/text drawing in fill mode.
+ Fixed "getextrema" to work also for multiband images.
+ Added transparency support for L and P images to the PNG codec.
+ Improved support for read-only images.  The "load" method now
  sets the "readonly" attribute for memory-mapped images.  Operations
  that modifies an image in place (such as "paste" and drawing operations)
  creates an in-memory copy of the image, if necessary.  (before this
  change, any attempt to modify a memory-mapped image resulted in a
  core dump...)
+ Added special cases for lists everywhere PIL expects a sequence.
  This should speed up things like "putdata" and drawing operations.
+ The Image.offset method is deprecated.  Use the ImageChops.offset
  function instead.
+ Changed ImageChops operators to copy palette and info dictionary
  from the first image argument.

use buildlink file for py-Tk

use buildlink files for Python and py-imaging, but keep it tied
to Python-2.0 for now because of the py-Tk mess

py-imagingtk-1.1.1 -- the tk interface to py-imaging.
Based on the package supplied by Jarkko Torppa in pkg/10808, but updated
to the latest version.

Initial revision