CVS log for pkgsrc/graphics/barcode/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / graphics / barcode

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Comment out some dead HOMEPAGEs.

Changes 0.99:
** New features
   Support for i18n.
   Change license to GPLv3 or later version.
   SVG support.
   Added support for PCL output.

Resolves:
"INFO_FILES should be set to YES or yes."
"Packages that install info files should set INFO_FILES."
Makefile and PLIST warning, respectively.

Reset maintainer on his request.

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Add DESTDIR support.

xscreensaver >= 5.00 no longer conflicts.

INSTALL_MAKE_FLAGS doesn't append to MAKE_FLAGS, it replaces it.  Make
sure that we preserve any other MAKE_FLAGS when setting INSTALL_MAKE_FLAGS.

* List the info file entries directly in the PLIST.
* Honor PKGINFODIR and PKGMANDIR.

Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

    http://mail-index.netbsd.org/tech-pkg/2005/12/02/0034.html

graphics/barcode and x11/xscreensaver conflict (because of
man/man1/barcode.1). Noted by kleink in PR 29585.

Update to version 0.98.

Packages changes:
	* Update HOMEPAGE.
	* Note that patch files were ordered so that the info file does
	not appear newer than its Texinfo source.

Changes since last packaged version:

2002-03-01  Alessandro Rubini  <rubini@linux.it>
	* library.c (Barcode_Encode): handle bitsets separately, like
		in Barcode_Print (otherwise, you might loose NO_CHECKSUM).
	* debian/changelog: moved to 0.98 (but should fix all debian/ stuff)
	* contrib/barcode-for-delphi.tar.gz: new, contributed by Michael Geddes
	* contrib/barcode-for-delphi.tar.gz.README: short info for file above
	* main.c (main): allow "-g" to set size of code in a table as well
		-- suggested and initiallt implemented by Joachim Reichelt.
	(main): fixed missing "Page: 1 1" in postscript for tables
	(main): for tables don't use Encode_and_Print, use a local
		unrolled version, so the default margin can be removed and
		we avoid problems with negative xoff in the output phase
		(first column may be offset, as noted by Karl Magnus Kolstoe)
	* doc/doc.barcode: documented change above.
	* README: removed refernces to systemy.it, I'm no more there
	Added link to FreeBSD ports tree and GLabels
	Organized as sections with titles
	* contrib/barcode-SVG.tar.gz: new contribution, by David J. Humphreys
	* contrib/barcode-SVG.tar.gz.README: short description of file above
	* contrib/grab-0.0.4.tar.gz: new program, by Tuukka Toivonen.
	* contrib/grab-0.0.4.tar.gz.README: short description of file above

2002-03-01  Boszormenyi Zoltan <zboszor@externet.hu>
	* barcode.spec: new file

2002-02-27  Alessandro Rubini  <rubini@linux.it>
	* bookland/bookland.py: updated to version 0.92 by Judah Milgram

2001-11-13  Alessandro Rubini  <rubini@linux.it>
	* README: Added a pointer to the Windows port.

2001-11-09  Cloyce D. Spradling  <cloyce@headgear.org>
	* code128.c (Barcode_128b_verify): prototype fix (unsigned char).
	* ps.c (Barcode_ps_print): the comment for ascii codes must only
		be printed if ascii is being printed (benign bug).

2001-11-06  Christoph Pross  <c.pross@beck-ipc.com>
	* pcl.c (Barcode_pcl_print): bugfix: bars were misplaced

2001-10-16  Nathan D. Holmes <nh412124@ursa.cosd.fedex.com>
	====> Version 0.97 released to ftp.systemy.it and ftp.gnu.org
	* code93.c: new file (I modified something as well - Alessandro)
	* doc/doc.barcode (Supported Encodings): added docs for code93
	* main.c: added code93 names
	* Makefile.in (LIBOBJECTS): added code93.o
	* library.c: added code93 entry points

2001-10-16  Alessandro Rubini  <rubini@linux.it>
	* doc/manpager: added (trivial) support for @itemize, added copyright
	* sample.c (main): accept -P to create PCL output
	* doc/doc.barcode (PCL Output): added the section, using text
	provided by Andrea Scopece and turning it into texinfo.
	Removed also a few extra newlines that made bad man pages

2001-10-16  Andrea Scopece  <a.scopece@vizzavi.it>
	* barcode.h: added BARCODE_OUT_PCL and BARCODE_OUT_PCL_III
	* library.c (Barcode_Print): use BARCODE_OUT_PCL to select pcl_print()
	* Makefile.in (LIBOBJECTS): added pcl.o
	* pcl.c: new file, with PCL output support

2001-10-16  Alessandro Rubini  <rubini@linux.it>
	* doc/doc.barcode (Supported Encodings): added documentation for
		EAN and UPC with checksum, as coded by mr. Böszörményi (below)

2001-10-16  Boszormenyi Zoltan <zboszor@externet.hu>
	* ean.c:
	I found that barcode-0.96 does not correctly encodes UPC-E.
	This was mainly because in upc_e_to_a() the switch() branches
	all ended without "break;".

	Printing UPC-E did not print the leading encoding number and
	the trailing UPC-A checksum. Now it does.

	Accept EAN-13 and EAN-8 with and without the checksum.
	So always treat 7 and 12 digit sequences as valid EAN codes
	and accept 8 and 13 digit sequences as valid EAN codes when
	the last digit is the same as the calculated one.

	Accept UPC-A as above (11 or 12 digit sequences.)

	Accepts UPC-E as:
	6 digit sequence: the middle part of the code (leading '0' assumed)
	7 digit sequence: the middle part and either a leading '0' or '1',
	    or a trailing UPC-A checksum. In that case, leading '0' assumed.
	8 digit sequence: a leading '0' or '1', middle part, checksum

	UPC-A, UPC-E, EAN-13, and EAN-8 may all include
	an additional barcode to the right of the main barcode.

	As a 7 or a 12 digit sequence may be ambiguous, please remember
	that EAN is checked before UPC if you specified BARCODE_ANY.

2001-08-20  Alessandro Rubini  <rubini@linux.it>
	* sample.c (main): added upc-e and ean-8 samples

2001-08-11  Boszormenyi Zoltan <zboszor@externet.hu>
	* ps.c (Barcode_ps_print): don't output "showpage" in EPS mode

2001-08-11  Alessandro Rubini  <rubini@linux.it>
	* README: Changed host names, added barcode-commit list.

2000-11-29  Alessandro Rubini  <rubini@morgana.systemy.it>
	* doc/doc.barcode (The Field List): 1pt == 0.352mm, not 0.0352
		(thanks to Stephen Irven for reporting)

USE_NEW_TEXINFO is unnecessary now.

COMMENT should start with a capital letter.

s/netbsd.org/NetBSD.org/

Convert to USE_NEW_TEXINFO.

Introduce new framework for handling info files generation and installation.

Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
    removal of USE_GTEXINFO
    INSTALL_INFO added to PLIST_SUBST
    `${INSTALL_INFO}' replace `install-info' in target rules
    print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
  makeinfo command usage

See -newly added by this commit- section 10.24 of Packages.txt for
further information.

added barcode-0.96:

create bar codes as EPS (program and library)

Initial revision