[BACK]Return to pkgsrc.txt CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / pkgsrc / doc

File: [cvs.NetBSD.org] / pkgsrc / doc / pkgsrc.txt (download)

Revision 1.2, Fri Oct 22 00:27:55 2004 UTC (19 years, 5 months ago) by hubertf
Branch: MAIN
Changes since 1.1: +715 -667 lines

update

The pkgsrc guide

Documentation on the NetBSD packages system

Alistair Crooks

<agc@NetBSD.org>

Hubert Feyrer

<hubertf@NetBSD.org>

The pkgsrc Developers Group

Copyright (C) 1994-2004 The NetBSD Foundation, Inc

$NetBSD: pkgsrc.xml,v 1.2 2004/10/21 15:07:47 grant Exp $

Abstract

Information about using the NetBSD package system (pkgsrc) from both a user
view for installing packages as well as from a pkgsrc developers' view for
creating new packages.

-------------------------------------------------------------------------------

Table of Contents

1. Introduction
   
    1.1. Introduction
    1.2. Overview
    1.3. Terminology
    1.4. Typography
   
I. The pkgsrc user's guide
   
    2. Where to get pkgsrc
       
        2.1. As tar file
        2.2. Via SUP
        2.3. Via CVS
       
    3. Using pkgsrc on systems other than NetBSD
       
        3.1. Bootstrapping pkgsrc
        3.2. Platform specific notes
           
            3.2.1. Darwin (Mac OS X)
            3.2.2. FreeBSD
            3.2.3. Interix
            3.2.4. IRIX
            3.2.5. OpenBSD
            3.2.6. Solaris
           
    4. Using pkgsrc
       
        4.1. Working with binary packages
           
            4.1.1. Where to get binary packages
            4.1.2. How to use binary packages
            4.1.3. A word of warning
           
        4.2. Building packages from source
           
            4.2.1. Requirements
            4.2.2. Fetching distfiles
            4.2.3. How to build and install
            4.2.4. Selecting the compiler
           
    5. Creating binary packages
       
        5.1. Building a single binary package
        5.2. Settings for creation of binary packages
        5.3. Doing a bulk build of all packages
           
            5.3.1. Configuration
            5.3.2. Other environmental considerations
            5.3.3. Operation
            5.3.4. What it does
            5.3.5. Disk space requirements
            5.3.6. Setting up a sandbox for chroot'ed builds
            5.3.7. Building a partial set of packages
           
        5.4. Creating a multiple CD-ROM packages collection
           
            5.4.1. Example of cdpack
           
    6. Frequently Asked Questions
       
        6.1. Is there a mailing list for pkg-related discussion?
        6.2. Where's the pkgviews documentation?
        6.3. Utilities for package management (pkgtools)
        6.4. How to use pkgsrc as non-root
        6.5. How can I install/use XFree86 from pkgsrc?
        6.6. How can I install/use X.org from pkgsrc?
        6.7. How to fetch files from behind a firewall
        6.8. How do I tell make fetch to do passive FTP?
        6.9. How to fetch all distfiles at once
        6.10. What does Don't know how to make /usr/share/tmac/tmac.andoc mean?
        6.11. What does Could not find bsd.own.mk mean?
        6.12. Using 'sudo' with pkgsrc
        6.13. Configuration files handling and placement
        6.14. Automated security checks
       
II. The pkgsrc developer's guide
   
    7. Package components - files, directories and contents
       
        7.1. Makefile
        7.2. distinfo
        7.3. patches/*
        7.4. Other mandatory files
        7.5. Optional files
        7.6. work*
        7.7. files/*
       
    8. PLIST issues
       
        8.1. RCS ID
        8.2. Semi-automatic PLIST generation
        8.3. Tweaking output of make print-PLIST
        8.4. Variable substitution in PLIST
        8.5. Manpage-compression
        8.6. Changing PLIST source with PLIST_SRC
        8.7. Platform specific and differing PLISTs
        8.8. Sharing directories between packages
       
    9. Buildlink methodology
       
        9.1. Converting packages to use buildlink3
        9.2. Writing buildlink3.mk files
           
            9.2.1. Anatomy of a buildlink3.mk file
            9.2.2. Updating BUILDLINK_DEPENDS.pkg in buildlink3.mk files
           
        9.3. Writing builtin.mk files
           
            9.3.1. Anatomy of a builtin.mk file
            9.3.2. Global preferences for native or pkgsrc software
           
    10. Options handling
       
        10.1. Global default options
        10.2. Converting packages to use bsd.options.mk
       
    11. The build process
       
        11.1. Program location
        11.2. Main targets
        11.3. Other helpful targets
       
    12. Notes on fixes for packages
       
        12.1. General operation
           
            12.1.1. How to pull in variables from /etc/mk.conf
            12.1.2. Restricted packages
            12.1.3. Handling dependencies
            12.1.4. Handling conflicts with other packages
            12.1.5. Packages that cannot or should not be built
            12.1.6. Packages which should not be deleted, once installed
            12.1.7. Handling packages with security problems
            12.1.8. How to handle compiler bugs
            12.1.9. How to handle incrementing versions when fixing an existing
                package
            12.1.10. Portability of packages
           
        12.2. Possible downloading issues
           
            12.2.1. Packages whose distfiles aren't available for plain
                downloading
            12.2.2. How to handle modified distfiles with the 'old' name
           
        12.3. Configuration gotchas
           
            12.3.1. Shared libraries - libtool
            12.3.2. Using libtool on GNU packages that already support libtool
            12.3.3. GNU Autoconf/Automake
           
        12.4. Building considerations
           
            12.4.1. CPP defines
           
        12.5. Package specific actions
           
            12.5.1. Package configuration files
            12.5.2. User interaction
            12.5.3. Handling licenses
            12.5.4. Creating an account from a package
            12.5.5. Installing score files
            12.5.6. Packages providing login shells
            12.5.7. Packages containing perl scripts
            12.5.8. Packages with hardcoded paths to other interpreters
            12.5.9. Packages installing perl modules
            12.5.10. Packages installing info files
            12.5.11. Packages installing GConf2 data files
            12.5.12. Packages installing scrollkeeper data files
            12.5.13. Packages installing X11 fonts
            12.5.14. Packages installing GTK2 modules
            12.5.15. Packages installing SGML or XML data
            12.5.16. Packages installing extensions to the MIME database
            12.5.17. Packages using intltool
           
        12.6. Feedback to the author
       
    13. Debugging
    14. Submitting and Committing
       
        14.1. Submitting your packages
        14.2. Committing: Importing a package into CVS
        14.3. Updating a package to a newer version
        14.4. Moving a package in pkgsrc
       
A. A simple example package: bison
   
    A.1. files
       
        A.1.1. Makefile
        A.1.2. DESCR
        A.1.3. PLIST
        A.1.4. Checking a package with pkglint
       
    A.2. Steps for building, installing, packaging
   
B. Build logs
   
    B.1. Building figlet
    B.2. Packaging figlet
   
C. Layout of the FTP server's package archive
D. Editing guidelines for the pkgsrc guide
   
    D.1. Targets
    D.2. Procedure
   
Chapter 1. Introduction

Table of Contents

1.1. Introduction
1.2. Overview
1.3. Terminology
1.4. Typography

1.1. Introduction

There is a lot of software freely available for Unix based systems, which
usually runs on NetBSD and other Unix-flavoured systems, too, sometimes with
some modifications. The NetBSD Packages Collection (pkgsrc) incorporates any
such changes necessary to make that software run, and makes the installation
(and de-installation) of the software package easy by means of a single
command.

Once the software has been built, it is manipulated with the pkg_* tools so
that installation and de-installation, printing of an inventory of all
installed packages and retrieval of one-line comments or more verbose
descriptions are all simple.

pkgsrc currently contains several thousand packages, including:

  * www/apache - The Apache web server
   
  * www/mozilla - The Mozilla web browser
   
  * meta-pkgs/gnome - The GNOME Desktop Environment
   
  * meta-pkgs/kde3 - The K Desktop Environment
   
...just to name a few.

pkgsrc has built-in support for handling varying dependencies, such as pthreads
and X11, and extended features such as IPv6 support on a range of platforms.

pkgsrc was derived from FreeBSD's ports system, and initially developed for
NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following
platforms:

  * Darwin (Mac OS X)
   
  * FreeBSD
   
  * Interix
   
  * IRIX
   
  * Linux
   
  * NetBSD (of course)
   
  * OpenBSD
   
  * Solaris
   
1.2. Overview

This document is divided into two parts. The first, The pkgsrc user's guide,
describes how one can use one of the packages in the Package Collection, either
by installing a precompiled binary package, or by building one's own copy using
the NetBSD package system. The second part, The pkgsrc developer's guide,
explains how to prepare a package so it can be easily built by other NetBSD
users without knowing about the package's building details.

This document is available in various formats:

  * HTML
   
  * PDF
   
  * PS
   
  * TXT
   
1.3. Terminology

There has been a lot of talk about "ports", "packages", etc. so far. Here is a
description of all the terminology used within this document.

Package
   
    A set of files and building instructions that describe what's necessary to
    build a certain piece of software using pkgsrc. Packages are traditionally
    stored under /usr/pkgsrc.
   
The NetBSD package system
   
    This is the former name of "pkgsrc". It is part of the NetBSD operating
    system and can be bootstrap to run on non-NetBSD operating systems as well.
    It handles building (compiling), installing, and removing of packages.
   
Distfile
   
    This term describes the file or files that are provided by the author of
    the piece of software to distribute his work. All the changes necessary to
    build on NetBSD are reflected in the corresponding package. Usually the
    distfile is in the form of a compressed tar-archive, but other types are
    possible, too. Distfiles are usually stored below /usr/pkgsrc/distfiles.
   
Port
   
    This is the term used by FreeBSD and OpenBSD people for what we call a
    package. In NetBSD terminology, "port" refers to a different architecture.
   
Precompiled/binary package
   
    A set of binaries built with pkgsrc from a distfile and stuffed together in
    a single .tgz file so it can be installed on machines of the same machine
    architecture without the need to recompile. Packages are usually generated
    in /usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.
   
    Sometimes, this is referred to by the term "package" too, especially in the
    context of precompiled packages.
   
Program
   
    The piece of software to be installed which will be constructed from all
    the files in the Distfile by the actions defined in the corresponding
    package.
   
1.4. Typography

When giving examples for commands, shell prompts are used to show if the
command should/can be issued as root, or if "normal" user privileges are
sufficient. We use a # for root's shell prompt, and a $ for users' shell
prompt, assuming they use the C-shell or tcsh.

The pkgsrc user's guide

Table of Contents

2. Where to get pkgsrc
   
    2.1. As tar file
    2.2. Via SUP
    2.3. Via CVS
   
3. Using pkgsrc on systems other than NetBSD
   
    3.1. Bootstrapping pkgsrc
    3.2. Platform specific notes
       
        3.2.1. Darwin (Mac OS X)
        3.2.2. FreeBSD
        3.2.3. Interix
        3.2.4. IRIX
        3.2.5. OpenBSD
        3.2.6. Solaris
       
4. Using pkgsrc
   
    4.1. Working with binary packages
       
        4.1.1. Where to get binary packages
        4.1.2. How to use binary packages
        4.1.3. A word of warning
       
    4.2. Building packages from source
       
        4.2.1. Requirements
        4.2.2. Fetching distfiles
        4.2.3. How to build and install
        4.2.4. Selecting the compiler
       
5. Creating binary packages
   
    5.1. Building a single binary package
    5.2. Settings for creation of binary packages
    5.3. Doing a bulk build of all packages
       
        5.3.1. Configuration
        5.3.2. Other environmental considerations
        5.3.3. Operation
        5.3.4. What it does
        5.3.5. Disk space requirements
        5.3.6. Setting up a sandbox for chroot'ed builds
        5.3.7. Building a partial set of packages
       
    5.4. Creating a multiple CD-ROM packages collection
       
        5.4.1. Example of cdpack
       
6. Frequently Asked Questions
   
    6.1. Is there a mailing list for pkg-related discussion?
    6.2. Where's the pkgviews documentation?
    6.3. Utilities for package management (pkgtools)
    6.4. How to use pkgsrc as non-root
    6.5. How can I install/use XFree86 from pkgsrc?
    6.6. How can I install/use X.org from pkgsrc?
    6.7. How to fetch files from behind a firewall
    6.8. How do I tell make fetch to do passive FTP?
    6.9. How to fetch all distfiles at once
    6.10. What does Don't know how to make /usr/share/tmac/tmac.andoc mean?
    6.11. What does Could not find bsd.own.mk mean?
    6.12. Using 'sudo' with pkgsrc
    6.13. Configuration files handling and placement
    6.14. Automated security checks
   
Chapter 2. Where to get pkgsrc

Table of Contents

2.1. As tar file
2.2. Via SUP
2.3. Via CVS

There are three ways to get pkgsrc. Either as a tar file, via SUP, or via CVS.
All three ways are described here.

2.1. As tar file

To get pkgsrc going, you need to get the pkgsrc.tar.gz file from ftp.NetBSD.org
and unpack it into /usr/pkgsrc.

2.2. Via SUP

As an alternative to the tar file, you can get pkgsrc via the Software Update
Protocol, SUP. To do so, make sure your supfile has a line

release=pkgsrc

in it, see the examples in /usr/share/examples/supfiles, and that the /usr/
pkgsrc directory exists. Then, simply run sup -v /path/to/your/supfile.

2.3. Via CVS

To get pkgsrc via CVS, make sure you have "cvs" installed. If not present on
your system, it can be found as precompiled binary on ftp.NetBSD.org. To do an
initial (full) checkout of pkgsrc, do the following steps:

% setenv CVSROOT anoncvs@anoncvs.NetBSD.org:/cvsroot
% setenv CVS_RSH ssh
% cd /usr
% cvs checkout -P pkgsrc

This will create the pkgsrc directory in your /usr, and all the package source
will be stored under /usr/pkgsrc. To update pkgsrc after the initial checkout,
make sure you have CVS_RSH set as above, then do:

% cd /usr/pkgsrc
% cvs -q update -dP

Please also note that it is possible to have multiple copies of the pkgsrc
hierarchy in use at any one time - all work is done relatively within the
pkgsrc tree.

Chapter 3. Using pkgsrc on systems other than NetBSD

Table of Contents

3.1. Bootstrapping pkgsrc
3.2. Platform specific notes
   
    3.2.1. Darwin (Mac OS X)
    3.2.2. FreeBSD
    3.2.3. Interix
    3.2.4. IRIX
    3.2.5. OpenBSD
    3.2.6. Solaris
   
3.1. Bootstrapping pkgsrc

For Operating Systems other than NetBSD, we provide a bootstrap kit to build
the required tools to use pkgsrc on your platform. Besides support for native
NetBSD, pkgsrc and the bootstrap kit have support for the following operating
systems:

  * Darwin (Mac OS X)
   
  * FreeBSD
   
  * Interix (Windows 2000, XP, 2003)
   
  * IRIX
   
  * Linux
   
  * OpenBSD
   
  * Solaris
   
Support for other platforms is under development.

Installing the bootstrap kit should be as simple as:

# env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout pkgsrc
# cd pkgsrc/bootstrap
# ./bootstrap

See Chapter 2, Where to get pkgsrc for other ways to get pkgsrc before
bootstrapping. The given bootstrap command will use the defaults of /usr/pkg
for the prefix where programs will be installed in, and /var/db/pkg for the
package database directory where pkgsrc will do it's internal bookkeeping.
However, these can also be set using command-line parameters.

Binary packages for the pkgsrc tools and an initial set of packages is
available for supported platforms. An up-to-date list of these can be found on 
www.pkgsrc.org.

3.2. Platform specific notes

Here are some platform-specific notes you should be aware of.

3.2.1. Darwin (Mac OS X)

Darwin 5.x and 6.x are supported. There are two methods of using pkgsrc on Mac
OS X, by using a disk image, or a UFS partition.

Before you start, you will need to download and install the Mac OS X Developer
Tools from Apple's Developer Connection. See http://developer.apple.com/macosx/
for details. Also, make sure you install X11 for Mac OS X and the X11 SDK from 
http://www.apple.com/macosx/x11/download/ if you intend to build packages that
use the X11 Window System.

If you already have a UFS partition, or have a spare partition that you can
format as UFS, it is recommended to use that instead of the disk image. It'll
be somewhat faster and will mount automatically at boot time, where you must
manually mount a disk image.

Note

You cannot use a HFS+ file system for pkgsrc, because pkgsrc currently requires
the filesystem to be case-sensitive, and HFS+ is not.

3.2.1.1. Using a disk image

Create the disk image:

# cd pkgsrc/bootstrap
# ./ufsdiskimage create ~/Documents/NetBSD 512 # megabytes - season to taste
# ./ufsdiskimage mount ~/Documents/NetBSD
# sudo chown `id -u`:`id -g` /Volumes/NetBSD

That's it!

3.2.1.2. Using a UFS partition

By default, /usr will be on your root file system, normally HFS+. It is
possible to use the default prefix of /usr/pkg by symlinking /usr/pkg to a
directory on a UFS file system. Obviously, another symlink is required if you
want to place the package database directory outside the prefix. e.g.

# ./bootstrap --pkgdbdir=/usr/pkg/pkgdb --pkgsrcdir=/Volumes/ufs/pkgsrc

If you created your partitions at the time of installing Mac OS X and formatted
the target partition as UFS, it should automatically mount on /Volumes/<volume
name> when the machine boots. If you are (re)formatting a partition as UFS, you
need to ensure that the partition map correctly reflects "Apple_UFS" and not
"Apple_HFS".

The problem is that none of the disk tools will let you touch a disk that is
booted from. You can unmount the partition, but even if you newfs it, the
partition type will be incorrect and the automounter won't mount it. It can be
mounted manually, but it won't appear in Finder.

You'll need to boot off of the OS X Installation (User) CD. When the
Installation program starts, go up to the menu and select Disk Utility. Now,
you will be able to select the partition you want to be UFS, and Format it
Apple UFS. Quit the Disk Utility, quit the installer which will reboot your
machine. The new UFS file system will appear in Finder.

Be aware that the permissions on the new file system will be writable by root
only.

This note is as of 10.2 (Jaguar) and applies to earlier versions. Hopefully
Apple will fix Disk Utility in 10.3 (Panther).

3.2.2. FreeBSD

FreeBSD 4.7 and 5.0 have been tested and are supported, other versions may
work.

Care should be taken so that the tools that this kit installs do not conflict
with the FreeBSD userland tools. There are several steps:

 1. FreeBSD stores its ports pkg database in /var/db/pkg. It is therefore
    recommended that you choose a different location (e.g. /usr/pkgdb) by using
    the --pkgdbdir option to the bootstrap script.
   
 2. If you do not intend to use the FreeBSD ports tools, it's probably a good
    idea to move them out of the way to avoid confusion, e.g.
   
    # cd /usr/sbin
    # mv pkg_add pkg_add.orig
    # mv pkg_create pkg_create.orig
    # mv pkg_delete pkg_delete.orig
    # mv pkg_info pkg_info.orig
    
 3. An example /etc/mk.conf file will be placed in /etc/mk.conf.example file
    when you use the bootstrap script.
   
3.2.3. Interix

Interix is a POSIX compatible subsystem for the Windows NT kernel, providing a
Unix-like environment with a tighter kernel integration than available with
Cygwin. It is part of the Windows Services for Unix package, available for free
for any licensed copy of Windows 2000, XP, or 2003. SFU can be downloaded from 
http://www.microsoft.com/windows/sfu/.

Services for Unix 3.5, current as of this writing, has been tested. 3.0 or 3.1
may work, but are not officially supported. (The main difference in 3.0/3.1 is
lack of pthreads.)

3.2.3.1. When installing Interix/SFU

At an absolute minimum, the following packages must be installed from the
Windows Services for Unix 3.5 distribution in order to use pkgsrc:

  * Utilities -> Base Utilities
   
  * Interix GNU Components -> (all)
   
  * Remote Connectivity
   
  * Interix SDK
   
When using pkgsrc on Interix, DO NOT install the Utilities subcomponent "UNIX
Perl". That is Perl 5.6 without shared module support, installed to /usr/local,
and will only cause confusion. Instead, install Perl 5.8 from pkgsrc (or from a
binary package).

The Remote Connectivity subcomponent "Windows Remote Shell Service" does not
need to be installed, but Remote Connectivity itself should be installed in
order to have a working inetd.

Finally, during installation you may be asked whether to enable setuid behavior
for Interix programs, and whether to make pathnames default to case-sensitive.
Setuid should be enabled, and case-sensitivity MUST be enabled. (Without
case-sensitivity, a large number of packages including perl will not build.)

3.2.3.2. What to do if Interix/SFU is already installed

If SFU is already installed and you wish to alter these settings to work with
pkgsrc, note the following things.

  * To uninstall UNIX Perl, use Add/Remove Programs, select Microsoft Windows
    Services for UNIX, then click Change. In the installer, choose Add or
    Remove, then uncheck Utilities->UNIX Perl.
   
  * To enable case-sensitivity for the filesystem, run REGEDIT.EXE, and change
    the following registry key:
   
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
   
    Set the DWORD value "obcaseinsensitive" to 0; then reboot.
   
  * To enable setuid binaries (optional), run REGEDIT.EXE, and change the
    following registry key:
   
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Services for UNIX
   
    Set the DWORD value "EnableSetuidBinaries" to 1; then reboot.
   
3.2.3.3. Important notes for using pkgsrc

The package imanager (either the pkgsrc "su" user, or the user running
"pkg_add") must be a member of the local Administrators group. Such a user must
also be used to run the bootstrap. This is slightly relaxed from the normal
pkgsrc requirement of "root".

The package manager should use a umask of 002. "make install" will
automatically complain if this is not the case. This ensures that directories
written in /var/db/pkg are Administrators-group writeable.

The popular Interix binary packages from http://www.interopsystems.com/ use an
older version of pkgsrc's pkg_* tools. Ideally, these should NOT be used in
conjunction with pkgsrc. If you choose to use them at the same time as the
pkgsrc packages, ensure that you use the proper pkg_* tools for each type of
binary package.

3.2.4. IRIX

You will need a working C compiler, either gcc or SGI's MIPS and MIPSpro
compiler (cc/c89). Please set the CC environment variable according to your
preference. If you do not have a license for the MIPSpro compiler suite, you
can download a gcc tardist file from http://freeware.sgi.com/.

Please note that you will need IRIX 6.5.17 or higher, as this is the earliest
version of IRIX providing support for if_indextoname(3), if_nametoindex(3),
etc.

At this point in time, pkgsrc only supports one ABI. That is, you can not
switch between the old 32-bit ABI, the new 32-bit ABI and the 64-bit ABI. If
you start out using "abi=n32", that's what all your packages will be built
with.

Therefore, please make sure that you have no conflicting CFLAGS in your
environment or the /etc/mk.conf. Particularly, make sure that you do not try to
link n32 object files with lib64 or vice versa. Check your /etc/
compiler.defaults!

If you have the actual pkgsrc tree mounted via NFS from a different host,
please make sure to set WRKOBJDIR to a local directory, as it appears that IRIX
linker occasionally runs into issues when trying to link over a network mounted
filesystem.

The bootstrapping process should set all the right options for programs such as
imake(1), but you may want to set some options depending on your local setup.
Please see pkgsrc/mk/bsd.pkg.defaults.mk and, of course, your compilers man
pages for details.

3.2.5. OpenBSD

OpenBSD 3.0 and 3.2 are tested and supported.

Care should be taken so that the tools that this kit installs do not conflict
with the OpenBSD userland tools. There are several steps:

 1. OpenBSD stores its ports pkg database in /var/db/pkg. It is therefore
    recommended that you choose a different location (e.g. /usr/pkgdb) by using
    the --pkgdbdir option to the bootstrap script.
   
 2. If you do not intend to use the OpenBSD ports tools, it's probably a good
    idea to move them out of the way to avoid confusion, e.g.
   
    # cd /usr/sbin
    # mv pkg_add pkg_add.orig
    # mv pkg_create pkg_create.orig
    # mv pkg_delete pkg_delete.orig
    # mv pkg_info pkg_info.orig
    
 3. An example /etc/mk.conf file will be placed in /etc/mk.conf.example file
    when you use the bootstrap script. OpenBSD's make program uses /etc/mk.conf
    as well. You can work around this by enclosing all the pkgsrc specific
    parts of the file with:
   
    .ifdef BSD_PKG_MK
    # pkgsrc stuff, e.g. insert bsd.pkg.defaults.mk or similar here
    .else
    # OpenBSD stuff
    .endif
    

3.2.6. Solaris

Solaris 2.6 through 9 are supported on both x86 and sparc. You will need a
working C compiler. Both gcc 2.95.3 and Sun WorkShop 5 have been tested.

The following packages are required on Solaris 8 for the bootstrap process and
to build packages.

  * SUNWsprot
   
  * SUNWarc
   
  * SUNWbtool
   
  * SUNWtoo
   
  * SUNWlibm
   
Please note the use of GNU binutils on Solaris is not supported.

3.2.6.1. If you are using gcc

It makes life much simpler if you only use the same gcc consistently for
building all packages.

It is recommended that an external gcc be used only for bootstrapping, then
either build gcc from lang/gcc or install a binary gcc package, then remove gcc
used during bootstrapping.

Binary packages of gcc can be found through http://www.sun.com/bigadmin/common/
freewareSearch.html.

3.2.6.2. If you are using Sun WorkShop

You will need at least the following packages installed (from WorkShop 5.0)

  * SPROcc - Sun WorkShop Compiler C 5.0
   
  * SPROcpl - Sun WorkShop Compiler C++ 5.0
   
  * SPROild - Sun WorkShop Incremental Linker
   
  * SPROlang - Sun WorkShop Compilers common components
   
You should set CC, CXX and optionally, CPP in /etc/mk.conf, eg.

CC=        cc
CXX=    CC
CPP=    /usr/ccs/lib/cpp

You may also want to build 64-bit binaries, eg.

CFLAGS= -xtarget=ultra -xarch=v9

Whichever compiler you use, please ensure the compiler tools and your $prefix
are in your PATH. This includes /usr/ccs/{bin,lib} and eg. /usr/pkg/{bin,sbin}.

Chapter 4. Using pkgsrc

Table of Contents

4.1. Working with binary packages
   
    4.1.1. Where to get binary packages
    4.1.2. How to use binary packages
    4.1.3. A word of warning
   
4.2. Building packages from source
   
    4.2.1. Requirements
    4.2.2. Fetching distfiles
    4.2.3. How to build and install
    4.2.4. Selecting the compiler
   
4.1. Working with binary packages

This section describes how to find, retrieve and install a precompiled binary
package that someone else already prepared for your type of machine.

4.1.1. Where to get binary packages

Precompiled packages are stored on ftp.NetBSD.org and its mirrors in the
directory /pub/NetBSD/packages for anonymous FTP access. Please pick the right
subdirectory there as indicated by uname -p. In that directory, there is a
subdirectory for each category plus a subdirectory All which includes the
actual binaries in .tgz files. The category subdirectories use symbolic links
to those files (this is the same directory layout as in /usr/pkgsrc/packages).

This same directory layout applies for CDROM distributions, only that the
directory may be rooted somewhere else, probably somewhere below /cdrom. Please
consult your CDROMs documentation for the exact location.

4.1.2. How to use binary packages

If you have the files on a CDROM or downloaded them to your hard disk, youcan
install them with the following command (be sure tosu to root first):

# pkg_add /path/to/package.tgz

If you have FTP access and you don't want to download the packages via FTP
prior to installation, you can do this automatically by giving pkg_add an FTP
URL:

# pkg_add ftp://ftp.NetBSD.org/pub/NetBSD/packages/<OSvers>/<arch>/All/package.tgz

If there is any doubt, the uname utility can be used to determine the <OSvers>,
and <arch> by running uname -rp.

Also note that any prerequisite packages needed to run the package in question
will be installed, too, assuming they are present where you install from.

After you've installed packages, be sure to have /usr/pkg/bin in your PATH so
you can actually start the just installed program.

4.1.3. A word of warning

Please pay very careful attention to the warnings expressed in the pkg_add(1)
manual page about the inherent dangers of installing binary packages which you
did not create yourself, and the security holes that can be introduced onto
your system by indiscriminate adding of such files.

4.2. Building packages from source

This assumes that the package is already in pkgsrc. If it is not, see Part II,
"The pkgsrc developer's guide".

4.2.1. Requirements

To build packages from source on a NetBSD system the "comp" and the "text"
distribution sets must be installed. If you want to build X11 related packages
the "xbase" and "xcomp" distribution sets are required, too.

4.2.2. Fetching distfiles

The distfile (i.e. the unmodified source) must exist on your system for the
packages system to be able to build it. If it does not exist, pkgsrc will use 
ftp(1) to fetch it automatically.

You can overwrite some of the major distribution sites to fit to sites that are
close to your own. Have a look at pkgsrc/mk/bsd.pkg.defaults.mk to find some
examples - in particular, look for the MASTER_SORT, MASTER_SORT_REGEX and
INET_COUNTRY definitions. This may save some of your bandwidth and time.

You can change these settings either in your shell's environment, or, if you
want to keep the settings, by editing the /etc/mk.conf file, and adding the
definitions there.

If you don't have a permanent Internet connection and you want to know which
files to download, make fetch-list will tell you what you'll need. Put these
distfiles into /usr/pkgsrc/distfiles.

4.2.3. How to build and install

Assuming that the distfile has been fetched (see previous section), become root
and change into the relevant directory and running make. For example, type

% cd misc/figlet
% make

at the shell prompt to build the various components of the package, and

# make install

to install the various components into the correct places on your system.
Installing the package on your system requires you to be root. However, pkgsrc
has a just-in-time-su feature, which allows you to only become root for the
actual installation step

Taking the figlet utility as an example, we can install it on our system by
building as shown in Appendix B, Build logs.

The program is installed under the default root of the packages tree - /usr/
pkg. Should this not conform to your tastes, set the LOCALBASE variable in your
environment, and it will use that value as the root of your packages tree. So,
to use /usr/local, set LOCALBASE=/usr/local in your environment. Please note
that you should use a directory which is dedicated to packages and not shared
with other programs (ie, do not try and use LOCALBASE=/usr). Also, you should
not try to add any of your own files or directories (such as src/, obj/, or
pkgsrc/) below the LOCALBASE tree. This is to prevent possible conflicts
between programs and other files installed by the package system and whatever
else may have been installed there.

Some packages look in /etc/mk.conf to alter some configuration options at build
time. Have a look at pkgsrc/mk/bsd.pkg.defaults.mk to get an overview of what
will be set there by default. Environment variables such as LOCALBASE can be
set in /etc/mk.conf to save having to remember to set them each time you want
to use pkgsrc.

Occasionally, people want to "look under the covers" to see what is going on
when a package is building or being installed. This may be for debugging
purposes, or out of simple curiosity. A number of utility values have been
added to help with this.

 1. If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a huge
    amount of information will be displayed. For example,
   
    make patch PKG_DEBUG_LEVEL=2
    
    will show all the commands that are invoked, up to and including the
    "patch" stage.
   
 2. If you want to know the value of a certain make(1) definition, then the
    VARNAME definition should be used, in conjunction with the show-var target.
    e.g. to show the expansion of the make(1) variable DISTFILES:
   
    % make show-var VARNAME=LOCALBASE
    /usr/pkg
    %
              
    

If you want to install a binary package that you've either created yourself
(see next section), that you put into pkgsrc/packages manually or that is
located on a remote FTP server, you can use the the "bin-install" target. This
target will install a binary package - if available - via pkg_add(1), else do a
make package. The list of remote FTP sites searched is kept in the variable
BINPKG_SITE, which defaults to ftp.NetBSD.org. Any flags that should be added
to pkg_add(1) can be put into BIN_INSTALL_FLAGS. See pkgsrc/mk/
bsd.pkg.defaults.mk for more details.

A final word of warning: If you setup a system that has a non-standard setting
for LOCALBASE, be sure to set that before any packages are installed, as you
can not use several directories for the same purpose. Doing so will result in
pkgsrc not being able to properly detect your installed packages, and fail
miserably. Note also that precompiled binary packages are usually built with
the default LOCALBASE of /usr/pkg, and that you should not install any if you
use a non-standard LOCALBASE.

4.2.4. Selecting the compiler

By default, pkgsrc will use GCC to build packages. This may be overridden by
setting the following variables in /etc/mk.conf:

PKGSRC_COMPILER:
   
    This is a list of values specifying the chain of compilers to invoke when
    building packages. Valid values are:
   
      * distcc: distributed C/C++ (chainable)
       
      * ccache: compiler cache (chainable)
       
      * gcc: GNU C/C++ Compiler
       
      * mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64)
       
      * mipspro: Silicon Graphics, Inc. MIPSpro (o32)
       
      * sunpro: Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
       
    The default is "gcc". You can use ccache and/or distcc with an appropriate
    PKGSRC_COMPILER setting, e.g. "ccache gcc". This variable should always be
    terminated with a value for a real compiler.
   
GCC_REQD:
   
    This specifies the minimum version of GCC to use when building packages. If
    the system GCC doesn't satisfy this requirement, then pkgsrc will build and
    install one of the GCC packages to use instead.
   
Chapter 5. Creating binary packages

Table of Contents

5.1. Building a single binary package
5.2. Settings for creation of binary packages
5.3. Doing a bulk build of all packages
   
    5.3.1. Configuration
    5.3.2. Other environmental considerations
    5.3.3. Operation
    5.3.4. What it does
    5.3.5. Disk space requirements
    5.3.6. Setting up a sandbox for chroot'ed builds
    5.3.7. Building a partial set of packages
   
5.4. Creating a multiple CD-ROM packages collection
   
    5.4.1. Example of cdpack
   
5.1. Building a single binary package

Once you have built and installed a package, you can create a binary package
which can be installed on another system with pkg_add(1) This saves having to
build the same package on a group of hosts and wasting CPU time. It also
provides a simple means for others to install your package, should you
distribute it.

To create a binary package, change into the appropriate directory in pkgsrc,
and run make package:

# cd misc/figlet
# make package

This will build and install your package (if not already done), and then build
a binary package from what was installed. You can then use the pkg_* tools to
manipulate it. Binary packages are created by default in /usr/pkgsrc/packages,
in the form of a gzipped tar file. See Section B.2, "Packaging figlet" for a
continuation of the above misc/figlet example.

See Chapter 14, Submitting and Committing for information on how to submit such
a binary package.

5.2. Settings for creation of binary packages

See Section 11.3, "Other helpful targets".

5.3. Doing a bulk build of all packages

If you want to get a full set of precompiled binary packages, this section
describes how to get them. Beware that the bulk build will remove all currently
installed packages from your system! Having a FTP server configured either on
the machine doing the bulk builds or on a nearby NFS server can help to make
the packages available to everyone. See ftpd(8) for more information. If you
use a remote NFS server's storage, be sure to not actually compile on NFS
storage, as this slows things down a lot.

5.3.1. Configuration

5.3.1.1. /etc/mk.conf

You may want to set things in /etc/mk.conf. Look at pkgsrc/mk/
bsd.pkg.defaults.mk for details of the default settings. You will want to
ensure that ACCEPTABLE_LICENSES meet your local policy. As used in this
example, _ACCEPTABLE=yes accepts all licenses.

PACKAGES?=      ${_PKGSRCDIR}/packages/${MACHINE_ARCH}
WRKOBJDIR?=     /usr/tmp/pkgsrc   # build here instead of in pkgsrc
BSDSRCDIR=      /usr/src
BSDXSRCDIR=     /usr/xsrc         # for x11/xservers
OBJHOSTNAME?=   yes               # use work.`hostname`
FAILOVER_FETCH= yes               # insist on the correct checksum
PKG_DEVELOPER?= yes
_ACCEPTABLE=    yes

5.3.1.2. build.conf

In pkgsrc/mk/bulk, copy build.conf-example to build.conf and edit it, following
the comments in that file. This is the config file that determines where log
files are generated after the build, where to mail the build report to, where
your pkgsrc tree is located and which user to su(8) to to do a cvs update.

5.3.1.3. pre-build.local

It is possible to configure the bulk build to perform certain site specific
tasks at the end of the pre-build stage. If the file pre-build.local exists in
/usr/pkgsrc/mk/bulk it will be executed (as a sh(1) script) at the end of the
usual pre-build stage. An example use of pre-build.local is to have the line:

# echo "I do not have enough disk space to build this pig." \
    > pkgsrc/games/crafty-book-enormous/$BROKENF

to prevent the system from trying to build a particular package which requires
nearly 3 GB of disk space.

5.3.2. Other environmental considerations

As /usr/pkg will be completely deleted at the start of bulk builds, make sure
your login shell is placed somewhere else. Either drop it into /usr/local/bin
(and adjust your login shell in the passwd file), or (re-)install it via 
pkg_add(1) from /etc/rc.local, so you can login after a reboot (remember that
your current process won't die if the package is removed, you just can't start
any new instances of the shell any more). Also, if you use NetBSD earlier than
1.5, or you still want to use the pkgsrc version of ssh for some reason, be
sure to install ssh before starting it from rc.local:

( cd /usr/pkgsrc/security/ssh ; make bulk-install )
if [ -f /usr/pkg/etc/rc.d/sshd ]; then
    /usr/pkg/etc/rc.d/sshd
fi

Not doing so will result in you being not able to log in via ssh after the bulk
build is finished or if the machine gets rebooted or crashes. You have been
warned! :)

5.3.3. Operation

Make sure you don't need any of the packages still installed.

Warning

During the bulk build, all packages will be removed!

Be sure to remove all other things that might interfere with builds, like some
libs installed in /usr/local, etc. then become root and type:

# cd /usr/pkgsrc
# sh mk/bulk/build

If for some reason your last build didn't complete (power failure, system
panic, ...), you can continue it by running:

# sh mk/bulk/build restart

At the end of the bulk build, you will get a summary via mail, and find build
logs in the directory specified by FTP in the build.conf file.

5.3.4. What it does

The bulk builds consist of three steps:

1. pre-build
   
    The script updates your pkgsrc tree via (anon)cvs, then cleans out any
    broken distfiles, and removes all packages installed.
   
2. the bulk build
   
    This is basically "make bulk-package" with an optimised order in which
    packages will be built. Packages that don't require other packages will be
    built first, and packages with many dependencies will be built later.
   
3. post-build
   
    Generates a report that's placed in the directory specified in the
    build.conf file named broken.html, a short version of that report will also
    be mailed to the build's admin.
   
During the build, a list of broken packages will be compiled in /usr/pkgsrc
/.broken (or .../.broken.${MACHINE} if OBJMACHINE is set), individual build
logs of broken builds can be found in the package's directory. These files are
used by the bulk-targets to mark broken builds to not waste time trying to
rebuild them, and they can be used to debug these broken package builds later.

5.3.5. Disk space requirements

Currently, roughly the following requirements are valid for NetBSD 2.0/i386:

  * 10 GB - distfiles (NFS ok)
   
  * 8 GB - full set of all binaries (NFS ok)
   
  * 5 GB - temp space for compiling (local disk recommended)
   
Note that all pkgs will be de-installed as soon as they are turned into a
binary package, and that sources are removed, so there is no excessively huge
demand to disk space. Afterwards, if the package is needed again, it will be
installed via pkg_add(1) instead of building again, so there are no cycles
wasted by recompiling.

5.3.6. Setting up a sandbox for chroot'ed builds

If you don't want all the pkgs nuked from a machine (rendering it useless for
anything but pkg compiling), there is the possibility of doing the pkg bulk
build inside a chroot environment.

The first step to do so is setting up a chroot sandbox, e.g. /usr/sandbox.
After extracting all the sets from a NetBSD installation or doing a make
distribution DESTDIR=/usr/sandbox in /usr/src/etc, be sure the following items
are present and properly configured:

 1. Kernel
   
    # cp /netbsd /usr/sandbox
    
 2. /dev/*
   
    # cd /usr/sandbox/dev ; sh MAKEDEV all
    
 3. /etc/resolv.conf (for security/smtpd and mail):
   
    # cp /etc/resolv.conf /usr/sandbox/etc
    
 4. Working(!) mail config (hostname, sendmail.cf):
   
    # cp /etc/mail/sendmail.cf /usr/sandbox/etc/mail
    
 5. /etc/localtime (for security/smtpd):
   
    # ln -sf /usr/share/zoneinfo/UTC /usr/sandbox/etc/localtime
    
 6. /usr/src (system sources, for sysutils/aperture, net/ppp-mppe):
   
    # ln -s ../disk1/cvs .
    # ln -s cvs/src-1.6 src
    
 7. Create /var/db/pkg (not part of default install):
   
    # mkdir /usr/sandbox/var/db/pkg
    
 8. Create /usr/pkg (not part of default install):
   
    # mkdir /usr/sandbox/usr/pkg
    
 9. Checkout pkgsrc via cvs into /usr/sandbox/usr/pkgsrc:
   
    # cd /usr/sandbox/usr
    # cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -d -P pkgsrc
    
    Do not mount/link this to the copy of your pkgsrc tree you do development
    in, as this will likely cause problems!
   
10. Make /usr/sandbox/usr/pkgsrc/packages and .../distfiles point somewhere
    appropriate. NFS- and/or nullfs-mounts may come in handy!
   
11. Edit /etc/mk.conf, see Section 5.3.1.1, "/etc/mk.conf".
   
12. Adjust mk/bulk/build.conf to suit your needs.
   
13. If you have set CVS_USER in build.conf, make sure that account exists and
    can do a cvs ${CVS_FLAGS} update properly!
   
When the chroot sandbox is setup, you can start the build with the following
steps:

# cd /usr/sandbox/usr/pkgsrc
# sh mk/bulk/do-sandbox-build

This will just jump inside the sandbox and start building. At the end of the
build, mail will be sent with the results of the build. Created binary pkgs
will be in /usr/sandbox/usr/pkgsrc/packages (wherever that points/mounts to/
from).

5.3.7. Building a partial set of packages

In addition to building a complete set of all packages in pkgsrc, the pkgsrc/mk
/bulk/build script may be used to build a subset of the packages contained in
pkgsrc. By setting defining SPECIFIC_PKGS in /etc/mk.conf, the variables

  * SITE_SPECIFIC_PKGS
   
  * HOST_SPECIFIC_PKGS
   
  * GROUP_SPECIFIC_PKGS
   
  * USER_SPECIFIC_PKGS
   
will define the set of packages which should be built. The bulk build code will
also include any packages which are needed as dependencies for the explicitly
listed packages.

One use of this is to do a bulk build with SPECIFIC_PKGS in a chroot sandbox
periodically to have a complete set of the binary packages needed for your site
available without the overhead of building extra packages that are not needed.

5.4. Creating a multiple CD-ROM packages collection

After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set
of the resulting binary packages to assist in installing packages on other
machines. The pkgtools/cdpack package provides a simple tool for creating the
ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that
keeps all the dependencies for given package on the same CD as that package.

5.4.1. Example of cdpack

Complete documentation for cdpack is found in the cdpack(1) manpage. The
following short example assumes that the binary packages are left in /usr/
pkgsrc/packages/All and that sufficient disk space exists in /u2 to hold the
ISO 9660 images.

# mkdir /u2/images
# pkg_add /usr/pkgsrc/packages/All/cdpack
# cdpack /usr/pkgsrc/packages/All /u2/images

If you wish to include a common set of files (COPYRIGHT, README, etc.) on each
CD in the collection, then you need to create a directory which contains these
files. e.g.

# mkdir /tmp/common
# echo "This is a README" > /tmp/common/README
# echo "Another file" > /tmp/common/COPYING
# mkdir /tmp/common/bin
# echo "#!/bin/sh" > /tmp/common/bin/myscript
# echo "echo Hello world" >> /tmp/common/bin/myscript
# chmod 755 /tmp/common/bin/myscript

Now create the images:

# cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images

Each image will contain README, COPYING, and bin/myscript in their root
directories.

Chapter 6. Frequently Asked Questions

Table of Contents

6.1. Is there a mailing list for pkg-related discussion?
6.2. Where's the pkgviews documentation?
6.3. Utilities for package management (pkgtools)
6.4. How to use pkgsrc as non-root
6.5. How can I install/use XFree86 from pkgsrc?
6.6. How can I install/use X.org from pkgsrc?
6.7. How to fetch files from behind a firewall
6.8. How do I tell make fetch to do passive FTP?
6.9. How to fetch all distfiles at once
6.10. What does Don't know how to make /usr/share/tmac/tmac.andoc mean?
6.11. What does Could not find bsd.own.mk mean?
6.12. Using 'sudo' with pkgsrc
6.13. Configuration files handling and placement
6.14. Automated security checks

This section contains hints, tips & tricks on special things in pkgsrc that we
didn't find a better place for in the previous chapters, and it contains items
for both pkgsrc users and developers.

6.1. Is there a mailing list for pkg-related discussion?

Yes, <tech-pkg@NetBSD.org> is the list for discussing package related issues.
To subscribe do:

% echo subscribe tech-pkg | mail majordomo@NetBSD.org

An archive of the list is available at http://mail-index.NetBSD.org/tech-pkg/.

6.2. Where's the pkgviews documentation?

Pkgviews is tightly integrated with buildlink. You can find a pkgviews User's
guide in pkgsrc/mk/buildlink3/PKGVIEWS_UG.

6.3. Utilities for package management (pkgtools)

The pkgsrc/pkgtools directory pkgtools contains a number of useful utilities
for both users and developers of pkgsrc. This section attempts only to make the
reader aware of the utilities and when they might be useful, and not to
duplicate the documentation that comes with each package.

Utilities used by pkgsrc (automatically installed when needed):

  * pkgtools/x11-links: symlinks for use by buildlink
   
OS tool augmentation (automatically installed when needed):

  * pkgtools/digest: calculates SHA1 checksums (and other kinds)
   
  * pkgtools/libnbcompat: compat library for pkg tools
   
  * pkgtools/mtree: installed on non-BSD systems due to lack of native mtree
   
  * pkgtools/pkg_install: up-to-date replacement for /usr/sbin/pkg_install, or
    for use on operating systems where pkg_install is not present
   
Utilities used by pkgsrc (not automatically installed):

  * pkgtools/pkg_tarup: create a binary package from an already-installed
    package. used by 'make replace' to save the old package
   
  * pkgtools/xpkgwedge: put X11 packages someplace else (enabled by default)
   
Utilities for keeping track of installed packages, being up to date, etc:

  * pkgtools/pkg_chk: installs pkg_chk, which reports on packages whose
    installed versions do not match the latest pkgsrc entries
   
  * pkgtools/pkgdep: makes dependency graphs of packages, to aid in choosing a
    strategy for updating
   
  * pkgtools/pkgdepgraph: make graph from above (uses graphviz)
   
  * pkgtools/pkglint: This provides two distinct abilities: check a pkgsrc
    entry for correctness (pkglint) check for and remove out-of-date distfiles
    and binary packages (lintpkgsrc)
   
  * pkgtools/pkgsurvey: report what packages you have installed
   
Utilities for people maintaining or creating individual packages:

  * pkgtools/pkgdiff: automate making and maintaining patches for a package
    (includes pkgdiff, pkgvi, mkpatches, ...)
   
  * pkgtools/rpm2pkg, pkgtools/url2pkg: aids in converting to pkgsrc
   
  * pkgtools/gensolpkg: convert pkgsrc to a Solaris package
   
Utilities for people maintaining pkgsrc (or more obscure pkg utilities)

  * pkgtools/pkgconflict: find packages that conflict but aren't marked as such
   
  * pkgtools/pkg_comp: build packages in a chrooted area
   
  * pkgtools/libkver: spoof kernel version for chrooted cross builds
   
6.4. How to use pkgsrc as non-root

If you want to use pkgsrc as non-root user, you can set some variables to make
pkgsrc work under these conditions. Please see this message for more details.

6.5. How can I install/use XFree86 from pkgsrc?

If you want to use XFree86 from pkgsrc instead of your system's own X11 (/usr/
X11R6, /usr/openwin, ...), you will have to add the following lines into
mk.conf:

      X11_TYPE=XFree86
    

6.6. How can I install/use X.org from pkgsrc?

If you want to use X.org from pkgsrc instead of your system's own X11 (/usr/
X11R6, /usr/openwin, ...) you will have to add the following lines into
mk.conf:

      X11_TYPE=xorg
    

6.7. How to fetch files from behind a firewall

If you are sitting behind a firewall which does not allow direct connections to
Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This
is done using an environment variable in the form of a URL e.g. in Amdahl, the
machine "orpheus.amdahl.com" is one of the firewalls, and it uses port 80 as
the proxy port number. So the proxy environment variables are:

  ftp_proxy=ftp://orpheus.amdahl.com:80/
http_proxy=http://orpheus.amdahl.com:80/

6.8. How do I tell make fetch to do passive FTP?

This depends on which utility is used to retrieve distfiles. From bsd.pkg.mk,
FETCH_CMD is assigned the first available command from the following list:

${LOCALBASE}/bin/ftp
/usr/bin/ftp

On a default NetBSD installation, this will be /usr/bin/ftp, which
automatically tries passive connections first, and falls back to active
connections if the server refuses to do passive. For the other tools, add the
following to your /etc/mk.conf file: PASSIVE_FETCH=1.

Having that option present will prevent /usr/bin/ftp from falling back to
active transfers.

6.9. How to fetch all distfiles at once

You would like to download all the distfiles in a single batch from work or
university, where you can't run a make fetch. There is an archive of distfiles
on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.

The answer here is to do a make fetch-list in /usr/pkgsrc or one of it's
subdirectories, carry the resulting list to your machine at work/school and use
it there If you don't have a NetBSD-compatible ftp(1) (like lukemftp) at work,
don't forget to set FETCH_CMD to something that fetches a URL:

At home:

% cd /usr/pkgsrc
% make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
% scp /tmp/fetch.sh work:/tmp

At work:

% sh /tmp/fetch.sh

then tar up /tmp/distfiles and take it home.

If you have a machine running NetBSD, and you want to get all distfiles (even
ones that aren't for your machine architecture), you can do so by using the
above-mentioned make fetch-list approach, or fetch the distfiles directly by
running:

% make mirror-distfiles

If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can get
everything by running:

% make fetch NO_SKIP=yes

6.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?

When compiling the pkgtools/pkg_install package, you get the error from make
that it doesn't know how to make /usr/share/tmac/tmac.andoc? This indicates
that you don't have installed the "text" set on your machine (nroff, ...). It
is recommended to do that to format manpages.

In the case of the pkgtools/pkg_install package, you can get away with setting
NOMAN=YES either in the environment or in /etc/mk.conf.

6.11. What does "Could not find bsd.own.mk" mean?

You didn't install the compiler set, comp.tgz, when you installed your NetBSD
machine. Please get it and install it, by extracting it in /:

# cd /
# tar --unlink -zxvpf .../comp.tgz

comp.tgz is part of every NetBSD release. Get the one that corresponds to your
release (determine via uname -r).

6.12. Using 'sudo' with pkgsrc

When installing packages as non-root user and using the just-in-time su(1)
feature of pkgsrc, it can become annoying to type in the root password for each
required package installed. To avoid this, the sudo package can be used, which
does password caching over a limited time. To use it, install sudo (either as
binary package or from security/sudo) and then put the following into your /etc
/mk.conf:

        .if exists(/usr/pkg/bin/sudo)
        SU_CMD=/usr/pkg/bin/sudo /bin/sh -c
        .endif
    

6.13. Configuration files handling and placement

The global variable PKG_SYSCONFBASE (and some others) can be set by the system
administrator in /etc/mk.conf to define the place where configuration files get
installed. Therefore, packages must be adapted to support this feature. Keep in
mind that you should only install files that are strictly necessary in the
configuration directory, files that can go to $PREFIX/share should go there.

We will take a look at available variables first (bsd.pkg.mk contains more
information). PKG_SYSCONFDIR is where the configuration files for a package may
be found (that is, the full path, e.g. /etc or /usr/pkg/etc). This value may be
customized in various ways:

 1. PKG_SYSCONFBASE is the main config directory under which all package
    configuration files are to be found. Users will typically want to set it to
    /etc, or accept the default location of $PREFIX/etc.
   
 2. PKG_SYSCONFSUBDIR is the subdirectory of PKG_SYSCONFBASE under which the
    configuration files for a particular package may be found. Defaults to $
    {SYSCONFBASE}.
   
 3. PKG_SYSCONFVAR is the special suffix used to distinguish any overriding
    values for a particular package (see next item). It defaults to ${PKGBASE},
    but for a collection of related packages that should all have the same
    PKG_SYSCONFDIR value, it can be set in each of the package Makefiles to a
    common value.
   
 4. PKG_SYSCONFDIR.${PKG_SYSCONFVAR} overrides the value of ${PKG_SYSCONFDIR}
    for packages with the same value for PKG_SYSCONFVAR.
   
    As an example, all the various KDE packages may want to set PKG_SYSCONFVAR
    to "kde" so admins can set PKG_SYSCONFDIR.kde in /etc/mk.conf to define
    where to install KDE config files.
   
Programs' configuration directory should be defined during the configure stage.
Packages that use GNU autoconf can usually do this by using the "--sysconfdir"
parameter, but this brings some problems as we will see now. When you change
this pathname in packages, you should not allow them to install files in that
directory directly. Instead they need to install those files under share/
examples/${PKGNAME} so PLIST can register them.

Once you have the required configuration files in place (under the share/
examples directory) the variable CONF_FILES should be set to copy them into
PKG_SYSCONFDIR. The contents of this variable is formed by pairs of filenames;
the first element of the pair specifies the file inside the examples directory
(registered by PLIST) and the second element specifies the target file. This is
done this way to allow binary packages to place files in the right directory
using INSTALL/DEINSTALL scripts which are created automatically. The package
Makefile must also set USE_PKGINSTALL=YES to use these automatically generated
scripts. The automatic copying of config files can be toggled by setting the
environment variable PKG_CONFIG prior to package installation.

Here is an example, taken from mail/mutt/Makefile:

  EGDIR=            ${PREFIX}/share/doc/mutt/samples
CONF_FILES=   ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc

As you can see, this package installs configuration files inside EGDIR, which
are registered by PLIST. After that, the variable CONF_FILES lists the
installed file first and then the target file. Users will also get an automatic
message when files are installed using this method.

6.14. Automated security checks

Please be aware that there can often be bugs in third-party software, and some
of these bugs can leave a machine vulnerable to exploitation by attackers. In
an effort to lessen the exposure, the NetBSD packages team maintains a database
of known-exploits to packages which have at one time been included in pkgsrc.
The database can be downloaded automatically, and a security audit of all
packages installed on a system can take place. To do this, install the security
/audit-packages package. It has two components:

 1. "download-vulnerability-list", an easy way to download a list of the
    security vulnerabilities information. This list is kept up to date by the
    NetBSD security officer and the NetBSD packages team, and is distributed
    from the NetBSD ftp server:
   
    ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/pkg-vulnerabilities
   
 2. "audit-packages", an easy way to audit the current machine, checking each
    vulnerability which is known. If a vulnerable package is installed, it will
    be shown by output to stdout, including a description of the type of
    vulnerability, and a URL containing more information.
   
Use of the audit-packages package is strongly recommended!

The following message is displayed as part of the audit-packages installation
procedure:

===========================================================================
$NetBSD: faq.xml,v 1.1.1.1 2004/10/21 14:27:43 grant Exp $

You may wish to have the vulnerabilities file downloaded daily so that
it remains current.  This may be done by adding an appropriate entry
to the root users crontab(5) entry.  For example the entry

# download vulnerabilities file
0 3 * * * ${PREFIX}/sbin/download-vulnerability-list >/dev/null 2>&1

will update the vulnerability list every day at 3AM. You may wish to do
this more often than once a day.

In addition, you may wish to run the package audit from the daily
security script.  This may be accomplished by adding the following
lines to /etc/security.local

if [ -x ${PREFIX}/sbin/audit-packages ]; then
          ${PREFIX}/sbin/audit-packages
fi

===========================================================================
    

The pkgsrc developer's guide

Table of Contents

7. Package components - files, directories and contents
   
    7.1. Makefile
    7.2. distinfo
    7.3. patches/*
    7.4. Other mandatory files
    7.5. Optional files
    7.6. work*
    7.7. files/*
   
8. PLIST issues
   
    8.1. RCS ID
    8.2. Semi-automatic PLIST generation
    8.3. Tweaking output of make print-PLIST
    8.4. Variable substitution in PLIST
    8.5. Manpage-compression
    8.6. Changing PLIST source with PLIST_SRC
    8.7. Platform specific and differing PLISTs
    8.8. Sharing directories between packages
   
9. Buildlink methodology
   
    9.1. Converting packages to use buildlink3
    9.2. Writing buildlink3.mk files
       
        9.2.1. Anatomy of a buildlink3.mk file
        9.2.2. Updating BUILDLINK_DEPENDS.pkg in buildlink3.mk files
       
    9.3. Writing builtin.mk files
       
        9.3.1. Anatomy of a builtin.mk file
        9.3.2. Global preferences for native or pkgsrc software
       
10. Options handling
   
    10.1. Global default options
    10.2. Converting packages to use bsd.options.mk
   
11. The build process
   
    11.1. Program location
    11.2. Main targets
    11.3. Other helpful targets
   
12. Notes on fixes for packages
   
    12.1. General operation
       
        12.1.1. How to pull in variables from /etc/mk.conf
        12.1.2. Restricted packages
        12.1.3. Handling dependencies
        12.1.4. Handling conflicts with other packages
        12.1.5. Packages that cannot or should not be built
        12.1.6. Packages which should not be deleted, once installed
        12.1.7. Handling packages with security problems
        12.1.8. How to handle compiler bugs
        12.1.9. How to handle incrementing versions when fixing an existing
            package
        12.1.10. Portability of packages
       
    12.2. Possible downloading issues
       
        12.2.1. Packages whose distfiles aren't available for plain downloading
        12.2.2. How to handle modified distfiles with the 'old' name
       
    12.3. Configuration gotchas
       
        12.3.1. Shared libraries - libtool
        12.3.2. Using libtool on GNU packages that already support libtool
        12.3.3. GNU Autoconf/Automake
       
    12.4. Building considerations
       
        12.4.1. CPP defines
       
    12.5. Package specific actions
       
        12.5.1. Package configuration files
        12.5.2. User interaction
        12.5.3. Handling licenses
        12.5.4. Creating an account from a package
        12.5.5. Installing score files
        12.5.6. Packages providing login shells
        12.5.7. Packages containing perl scripts
        12.5.8. Packages with hardcoded paths to other interpreters
        12.5.9. Packages installing perl modules
        12.5.10. Packages installing info files
        12.5.11. Packages installing GConf2 data files
        12.5.12. Packages installing scrollkeeper data files
        12.5.13. Packages installing X11 fonts
        12.5.14. Packages installing GTK2 modules
        12.5.15. Packages installing SGML or XML data
        12.5.16. Packages installing extensions to the MIME database
        12.5.17. Packages using intltool
       
    12.6. Feedback to the author
   
13. Debugging
14. Submitting and Committing
   
    14.1. Submitting your packages
    14.2. Committing: Importing a package into CVS
    14.3. Updating a package to a newer version
    14.4. Moving a package in pkgsrc
   
Chapter 7. Package components - files, directories and contents

Table of Contents

7.1. Makefile
7.2. distinfo
7.3. patches/*
7.4. Other mandatory files
7.5. Optional files
7.6. work*
7.7. files/*

Whenever you're preparing a package, there are a number of files involved which
are described in the following sections.

7.1. Makefile

Building, installation and creation of a binary package are all controlled by
the package's Makefile.

There is a Makefile for each package. This file includes the standard
bsd.pkg.mk file (referenced as ../../mk/bsd.pkg.mk), which sets all the
definitions and actions necessary for the package to compile and install
itself. The mandatory variables are the DISTNAME which specifies the base name
of the distribution file to be downloaded from the site on the Internet,
MASTER_SITES which specifies that site, CATEGORIES which denotes the categories
into which the package falls, PKGNAME which is the name of the package, the
MAINTAINER's name, and the COMMENT variable, which should contain a one-line
description of the package (the package name should not appear, it will be
added automatically). The maintainer variable is there so that anyone who
quibbles with the (always completely correct) decisions taken by the guy who
maintains the package can complain vigorously, or send chocolate as a sign of
appreciation.

The MASTER_SITES may be set to one of the predefined sites:

        ${MASTER_SITE_APACHE}
        ${MASTER_SITE_DEBIAN}
        ${MASTER_SITE_GNOME}
        ${MASTER_SITE_GNU}
        ${MASTER_SITE_GNUSTEP}
        ${MASTER_SITE_MOZILLA}
        ${MASTER_SITE_PERL_CPAN}
        ${MASTER_SITE_SOURCEFORGE}
        ${MASTER_SITE_SUNSITE}
        ${MASTER_SITE_R_CRAN}
        ${MASTER_SITE_SUSE}
        ${MASTER_SITE_TEX_CTAN}
        ${MASTER_SITE_XCONTRIB}
        ${MASTER_SITE_XEMACS} 

If one of these predefined sites is chosen, you may require the ability to
specify a subdirectory of that site. Since these macros may expand to more than
one actual site, you must use the following construct to specify a
subdirectory:

        ${MASTER_SITE_GNU:=subdirectory/name/}
        ${MASTER_SITE_SOURCEFORGE:=project_name/} 

Note the trailing slash after the subdirectory name.

Note

MASTER_SITE_SUBDIR has been deprecated and should no longer be used.

If the package has multiple DISTFILES or multiple PATCHFILES from different
sites, set SITES_foo to a list of URI's where file "foo" may be found. "foo"
includes the suffix, e.g.

DISTFILES=      ${DISTNAME}${EXTRACT_SUFX}
DISTFILES+=     foo-file.tar.gz
SITES_foo-file.tar.gz=http://www.somewhere.com/somehow/ \
        http://www.somewhereelse.com/mirror/somehow/

Note that the normal default setting of DISTFILES must be made explicit if you
want to add to it (rather than replace it), as you usually would.

Currently the following values are available for CATEGORIES. If more than one
is used, they need to be separated by spaces:

archivers     cross         geography     meta-pkgs     security
audio         databases     graphics      misc          shells
benchmarks    devel         ham           multimedia    sysutils
biology       editors       inputmethod   net           textproc
cad           emulators     lang          news          time
chat          finance       mail          parallel      wm
comms         fonts         math          pkgtools      www
converters    games         mbone         print         x11

Please pay attention to the following gotchas:

  * Add MANCOMPRESSED if manpages are installed in compressed form by the
    package; see comment in bsd.pkg.mk.
   
  * Replace /usr/local with "${PREFIX}" in all files (see patches, below).
   
  * If the package installs any info files, see Section 12.5.10, "Packages
    installing info files".
   
  * Set MAINTAINER to be yourself. If you really can't maintain the package for
    future updates, set it to <tech-pkg@NetBSD.org>.
   
  * If a home page for the software in question exists, add the variable
    HOMEPAGE right after MAINTAINER. The value of this variable should be the
    URL for the home page.
   
  * Be sure to set the COMMENT variable to a short description of the package,
    not containing the pkg's name.
   
7.2. distinfo

Most important, the mandatory message digest, or checksum, of all the distfiles
needed for the package to compile, confirming they match the original file
distributed by the author. This ensures that the distfile retrieved from the
Internet has not been corrupted during transfer or altered by a malign force to
introduce a security hole. It is generated using the make makesum command. The
digest algorithm used was, at one stage, md5, but that was felt lacking
compared to sha1, and so sha1 is now the default algorithm. The distfile size
is also generated and stored in new distinfo files. The pkgtools/digest utility
calculates all of the digests in the distinfo file, and it provides various
different algorithms. At the current time, the algorithms provided are: md5, 
rmd160, sha1, sha256, sha384 and sha512.

Some packages have different sets of distfiles on a per architecture basis, for
example www/navigator). These are kept in the same distinfo file and care
should be taken when upgrading such a package to ensure distfile information is
not lost.

The message digest/checksum for all the official patches found in the patches/
directory (see Section 7.3, "patches/*") for the package is also stored in the
distinfo file. This is a message digest/checksum of all lines in the patch file
except the NetBSD RCS Id. This file is generated by invoking make makepatchsum
(or make mps if you're in a hurry).

7.3. patches/*

This directory contains files that are used by the patch(1) command to modify
the sources as distributed in the distribution file into a form that will
compile and run perfectly on NetBSD. The files are applied successively in
alphabetic order (as returned by a shell "patches/patch-*" glob expansion), so
patch-aa is applied before patch-ab, etc.

Patch files which are optional and will depend on local site configuration can
be included with names matching the pattern patches/patch-optional-*. Their
suffixes should match the configuration options. The selected optional patch
file names should be assigned to the variable OPTIONAL_PATCHFILES. They will
not be applied by default.

For example if a package data file needs patching to indicate the default local
printer paper size as specified in the $PAPERSIZE file you can include patches
for all the possible paper sizes other than the one the package comes
configured for by default. In this case you might have a patch called
"patch-optional-Letter-papersize" and/or another patch called
"patch-optional-A4-papersize". In your Makefile you would select between them
with the following construct:

            
   PATCHDIR=    ${.CURDIR}/patches
   .if exists(${PATCHDIR}/patch-optional-${PAPERSIZE}-papersize)
        OPTIONAL_PATCHFILES+= ${PATCHDIR}/patch-optional-${PAPERSIZE}-papersize
   .endif 

Note that you have to define the value of PATCHDIR in order to use it in a ".if
" statement like this as otherwise it's not defined until too late during the
processing of the Makefile. You should use a ".if" statement in order to avoid
problems should the configuration item ($PAPERSIZE in this example) be set to
an unexpected value.

The patch-* files should be in diff -bu format, and apply without a fuzz to
avoid problems. (To force patches to apply with fuzz you can set
PATCH_FUZZ_FACTOR=-F2). Furthermore, do not put changes for more than one file
into a single patch-file, as this will make future modifications more
difficult.

Similar, a file should be patched at most once, not several times by several
different patches. If a file needs several patches, they should be combined
into one file.

One important thing to mention is to pay attention that no RCS IDs get stored
in the patch files, as these will cause problems when later checked into the
NetBSD CVS tree. Use the pkgdiff from the pkgtools/pkgdiff package to avoid
these problems.

For even more automation, we recommend using mkpatches from the same package to
make a whole set of patches. You just have to backup files before you edit them
to filename.orig, e.g. with cp -p filename filename.orig or, easier, by using 
pkgvi again from the same package. If you upgrade a package this way, you can
easily compare the new set of patches with the previously existing one with 
patchdiff.

When you have finished a package, remember to generate the checksums for the
patch files by using the make makepatchsum command, see Section 7.2, "distinfo"
.

Patch files that are distributed by the author or other maintainers can be
listed in $PATCHFILES.

If it is desired to store any patches that should not be committed into pkgsrc,
they can be kept outside the pkgsrc tree in the $LOCALPATCHES directory. The
directory tree there is expected to have the same "category/package" structure
as pkgsrc, and patches are expected to be stored inside these dirs (also known
as $LOCALPATCHES/$PKGPATH). For example if you want to keep a private patch for
pkgsrc/graphics/png, keep it in $LOCALPATCHES/graphics/png/mypatch. All files
in the named directory are expected to be patch files, and they are applied
after pkgsrc patches are applied.

7.4. Other mandatory files

DESCR
   
    A multi-line description of the piece of software. This should include any
    credits where they are due. Please bear in mind that others do not share
    your sense of humour (or spelling idiosyncrasies), and that others will
    read everything that you write here.
   
PLIST
   
    This file governs the files that are installed on your system: all the
    binaries, manual pages, etc. There are other directives which may be
    entered in this file, to control the creation and deletion of directories,
    and the location of inserted files. See Chapter 8, PLIST issues for more
    information.
   
7.5. Optional files

INSTALL
   
    This shell script is invoked twice by pkg_add(1). First time after package
    extraction and before files are moved in place, the second time after the
    files to install are moved in place. This can be used to do any custom
    procedures not possible with @exec commands in PLIST. See pkg_add(1) and 
    pkg_create(1) for more information.
   
DEINSTALL
   
    This script is executed before and after any files are removed. It is this
    script's responsibility to clean up any additional messy details around the
    package's installation, since all pkg_delete knows is how to delete the
    files created in the original distribution. See pkg_delete(1) and 
    pkg_create(1) for more information.
   
MESSAGE
   
    Display this file after installation of the package. Useful for things like
    legal notices on almost-free software and hints for updating config files
    after installing modules for apache, PHP etc. Please note that you can
    modify variables in it easily by using MESSAGE_SUBST in the package's
    Makefile:
   
    MESSAGE_SUBST+=  SOMEVAR="somevalue"
    
    replaces "${SOMEVAR}" with "somevalue" in MESSAGE.
   
7.6. work*

When you type make the distribution files are unpacked into this directory. It
can be removed by running make clean. Besides the sources, this directory is
also used to keep various timestamp files.

If a package doesn't create a subdirectory for itself (like GNU software does,
for instance), but extracts itself in the current directory, you should set
WRKSRC accordingly, e.g. editors/sam again, but the quick answer is:

WRKSRC=                ${WRKDIR}

Please note that the old NO_WRKSUBDIR has been deprecated and should not be
used. Also, if your package doesn't create a subdir with the name of DISTNAME
but some different name, set WRKSRC to point to the proper name in ${WRKDIR}.
See lang/tcl and x11/tk for examples, and here is another one:

WRKSRC=         ${WRKDIR}/${DISTNAME}/unix

The name of the working directory created by pkgsrc is work by default. If the
same pkgsrc tree should be used on several different platforms, the variable
OBJMACHINE can be set in /etc/mk.conf to attach the platform to the directory
name, e.g. work.i386 or work.sparc.

7.7. files/*

If you have any files that you wish to be placed in the package prior to
configuration or building, you could place these files here and use a "${CP}"
command in the "pre-configure" target to achieve this. Alternatively, you could
simply diff the file against /dev/null and use the patch mechanism to manage
the creation of this file.

Chapter 8. PLIST issues

Table of Contents

8.1. RCS ID
8.2. Semi-automatic PLIST generation
8.3. Tweaking output of make print-PLIST
8.4. Variable substitution in PLIST
8.5. Manpage-compression
8.6. Changing PLIST source with PLIST_SRC
8.7. Platform specific and differing PLISTs
8.8. Sharing directories between packages

The PLIST file contains a package's "packing list", i.e. a list of files that
belong to the package (relative to the ${PREFIX} directory it's been installed
in) plus some additional statements - see the pkg_create(1) manpage for a full
list. This chapter addresses some issues that need attention when dealing with
the PLIST file (or files, see below!).

8.1. RCS ID

Be sure to add a RCS ID line as the first thing in any PLIST file you write:

@comment $NetBSD$

8.2. Semi-automatic PLIST generation

You can use the make print-PLIST command to output a PLIST that matches any new
files since the package was extracted. See Section 11.3, "Other helpful
targets" for more information on this target.

8.3. Tweaking output of make print-PLIST

If you have used any of the *-dirs packages, as explained in Section 8.8,
"Sharing directories between packages", you may have noticed that make
print-PLIST outputs a set of @comments instead of real @dirrm lines. You can
also do this for specific directories and files, so that the results of that
command are very close to reality. This helps a lot during the update of
packages.

The PRINT_PLIST_AWK variable takes a set of AWK patterns and actions that are
used to filter the output of print-PLIST. You can append any chunk of AWK
scripting you like to it, but be careful with quoting.

For example, to get all files inside the libdata/foo directory removed from the
resulting PLIST:

      PRINT_PLIST_AWK+= /^libdata\/foo/ { next; }
    

And to get all the @dirrm lines referring to a specific (shared) directory
converted to @comments:

      PRINT_PLIST_AWK+= /^@dirrm share\/specific/ { print "@comment " $$0; next; }
    

8.4. Variable substitution in PLIST

A number of variables are substituted automatically in PLISTs when a package is
installed on a system. This includes the following variables:

${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}
   
    Some packages like emacs and perl embed information about which
    architecture they were built on into the pathnames where they install their
    file. To handle this case, PLIST will be preprocessed before actually used,
    and the symbol "${MACHINE_ARCH}" will be replaced by what uname -p gives.
    The same is done if the string ${MACHINE_GNU_ARCH} is embedded in PLIST
    somewhere - use this on packages that have GNU autoconf created configure
    scripts.
   
    Legacy note
   
    There used to be a symbol "$ARCH" that was replaced by the output of uname
    -m, but that's no longer supported and has been removed.
   
${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}
   
    Some packages want to embed the OS name and version into some paths. To do
    this, use these variables in the PLIST:
   
      * ${OPSYS} - output of "uname -s"
       
      * ${LOWER_OPSYS} - lowercase common name (eg. "solaris")
       
      * ${OS_VERSION} - "uname -r"
       
${PKGLOCALEDIR}
   
    Packages that install locale files should list them in the PLIST as "$
    {PKGLOCALEDIR}/locale/de/LC_MESSAGES/..." instead of "share/locale/de/
    LC_MESSAGES/...". This properly handles the fact that different operating
    systems expect locale files to be either in share or lib by default.
   
For a complete list of values which are replaced by default, please look in
bsd.pkg.mk (and search for PLIST_SUBST).

If you want to change other variables not listed above, you can add variables
and their expansions to this variable in the following way, similar to
MESSAGE_SUBST (see Section 7.5, "Optional files"):

PLIST_SUBST+=    SOMEVAR="somevalue"

This replaces all occurrences of "${SOMEVAR}" in the PLIST with "somevalue".

8.5. Manpage-compression

Manpages should be installed in compressed form if MANZ is set (in bsd.own.mk),
and uncompressed otherwise. To handle this in the PLIST file, the suffix ".gz"
is appended/removed automatically for manpages according to MANZ and
MANCOMPRESSED being set or not, see above for details. This modification of the
PLIST file is done on a copy of it, not PLIST itself.

8.6. Changing PLIST source with PLIST_SRC

To use one or more files as source for the PLIST used in generating the binary
package, set the variable PLIST_SRC to the names of that file(s). The files are
later concatenated using cat(1), and order of things is important.

8.7. Platform specific and differing PLISTs

Some packages decide to install a different set of files based on the operating
system being used. These differences can be automatically handled by using the
following files:

  * PLIST.common
   
  * PLIST.${OPSYS}
   
  * PLIST.common_end
   
If PLIST.${OPSYS} exists, these files are used instead of PLIST. This allows
packages which behave in this way to be handled gracefully. Manually overriding
PLIST_SRC for other more exotic uses is also possible.

8.8. Sharing directories between packages

A "shared directory" is a directory where multiple (and unrelated) packages
install files. These directories are problematic because you have to add
special tricks in the PLIST to conditionally remove them, or have some
centralized package handle them.

Within pkgsrc, you'll find both approaches. If a directory is shared by a few
unrelated packages, it's often not worth to add an extra package to remove it.
Therefore, one simply does:

      @unexec ${RMDIR} %D/path/to/shared/directory 2>/dev/null || ${TRUE}
    

in the PLISTs of all affected packages, instead of the regular "@dirrm" line.

However, if the directory is shared across many packages, two different
solutions are available:

 1. If the packages have a common dependency, the directory can be removed in
    that. For example, see textproc/scrollkeeper, which removes the shared
    directory share/omf.
   
 2. If the packages using the directory are not related at all (they have no
    common dependencies), a *-dirs package is used.
   
From now on, we'll discuss the second solution. To get an idea of the *-dirs
packages available, issue:

      % cd .../pkgsrc
      % ls -d */*-dirs
    

Their use from other packages is very simple. The USE_DIRS variable takes a
list of package names (without the "-dirs" part) together with the required
version number (always pick the latest one when writting new packages).

For example, if a package installs files under share/applications, it should
have the following line in it:

      USE_DIRS+= xdg-1.1
    

After regenerating the PLIST using make print-PLIST, you should get the right
(commented out) lines.

Note that, even if your package is using $X11BASE, it must not depend on the
*-x11-dirs packages. Just specify the name without that part and pkgsrc (in
particular, mk/dirs.mk) will take care of it.

Chapter 9. Buildlink methodology

Table of Contents

9.1. Converting packages to use buildlink3
9.2. Writing buildlink3.mk files
   
    9.2.1. Anatomy of a buildlink3.mk file
    9.2.2. Updating BUILDLINK_DEPENDS.pkg in buildlink3.mk files
   
9.3. Writing builtin.mk files
   
    9.3.1. Anatomy of a builtin.mk file
    9.3.2. Global preferences for native or pkgsrc software
   
Buildlink is a framework in pkgsrc that controls what headers and libraries are
seen by a package's configure and build processes. This is implemented in a two
step process:

 1. Symlink headers and libraries for dependencies into BUILDLINK_DIR, which by
    default is a subdirectory of WRKDIR.
   
 2. Create wrapper scripts that are used in place of the normal compiler tools
    that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib into
    references to BUILDLINK_DIR. The wrapper scripts also make native compiler
    on some operating systems look like GCC, so that packages that expect GCC
    won't require modifications to build with those native compilers.
   
This normalizes the environment in which a package is built so that the package
may be built consistently despite what other software may be installed. Please
note that the normal system header and library paths, e.g. /usr/include, /usr/
lib, etc., are always searched -- buildlink3 is designed to insulate the
package build from non-system-supplied software.

9.1. Converting packages to use buildlink3

The process of converting packages to use the buildlink3 framework
("bl3ifying") is fairly straightforward. The things to keep in mind are:

 1. Set USE_BUILDLINK3 to "yes".
   
 2. Ensure that the build always calls the wrapper scripts instead of the
    actual toolchain. Some packages are tricky, and the only way to know for
    sure is the check ${WRKDIR}/.work.log to see if the wrappers are being
    invoked.
   
 3. Don't override PREFIX from within the package Makefile, e.g. Java VMs,
    standalone shells, etc., because the code to symlink files into $
    {BUILDLINK_DIR} looks for files relative to "pkg_info -qp pkgname".
   
 4. Remember that only the buildlink3.mk files that you list in a package's
    Makefile are added as dependencies for that package.
   
If a dependency on a particular package is required for its libraries and
headers, then we replace:

DEPENDS+=       foo>=1.1.0:../../category/foo

with

.include "../../category/foo/buildlink3.mk"

There are several buildlink3.mk files in pkgsrc/mk that handle special package
issues:

  * bdb.buildlink3.mk chooses either the native or a pkgsrc Berkeley DB
    implementation based on the values of BDB_ACCEPTED and BDB_DEFAULT.
   
  * curses.buildlink3.mk If the system comes with neither Curses nor NCurses,
    this will take care to install the devel/ncurses package.
   
  * krb5.buildlink3.mk uses the value of KRB5_ACCEPTED to choose between adding
    a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5
    implementation.
   
  * motif.buildlink3.mk checks for a system-provided Motif installation or adds
    a dependency on x11/lesstif or x11/openmotif;
   
  * ossaudio.buildlink3.mk defines several variables that may be used by
    packages that use the Open Sound System (OSS) API;
   
  * pgsql.buildlink3.mk will accept either Postgres 7.3 or 7.4, whichever is
    found installed. See the file for more information.
   
  * pthread.buildlink3.mk uses the value of PTHREAD_OPTS and checks for native
    pthreads or adds a dependency on devel/pth as needed;
   
  * xaw.buildlink3.mk uses the value of XAW_TYPE to choose a particular Athena
    widgets library.
   
The comments in those buildlink3.mk files provide a more complete description
of how to use them properly.

9.2. Writing buildlink3.mk files

A package's buildlink3.mk file is included by Makefiles to indicate the need to
compile and link against header files and libraries provided by the package. A
buildlink3.mk file should always provide enough information to add the correct
type of dependency relationship and include any other buildlink3.mk files that
it needs to find headers and libraries that it needs in turn.

To generate an initial buildlink3.mk file for further editing, Rene Hexel's 
pkgtools/createbuildlink package is highly recommended. For most packages, the
following command will generate a good starting point for buildlink3.mk files:

% cd pkgsrc/category/pkgdir
% createbuildlink -3 >buildlink3.mk

9.2.1. Anatomy of a buildlink3.mk file

The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
tiff:

# $NetBSD: buildlink3.mk,v 1.7 2004/03/18 09:12:12 jlam Exp $

BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH}+
TIFF_BUILDLINK3_MK:=    ${TIFF_BUILDLINK3_MK}+

.if !empty(BUILDLINK_DEPTH:M+)
BUILDLINK_DEPENDS+=     tiff
.endif

BUILDLINK_PACKAGES:=    ${BUILDLINK_PACKAGES:Ntiff}
BUILDLINK_PACKAGES+=    tiff

.if !empty(TIFF_BUILDLINK3_MK:M+)
BUILDLINK_DEPENDS.tiff+=        tiff>=3.6.1
BUILDLINK_PKGSRCDIR.tiff?=      ../../graphics/tiff
.endif  # TIFF_BUILDLINK3_MK

.include "../../devel/zlib/buildlink3.mk"
.include "../../graphics/jpeg/buildlink3.mk"

BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH:S/+$//} 

The header and footer manipulate BUILDLINK_DEPTH, which is common across all
buildlink3.mk files and is used to track at what depth we are including
buildlink3.mk files.

The first section controls if the dependency on pkg is added. BUILDLINK_DEPENDS
is the global list of packages for which dependencies are added by buildlink3.

The second section advises pkgsrc that the buildlink3.mk file for pkg has been
included at some point. BUILDLINK_PACKAGES is the global list of packages for
which buildlink3.mk files have been included. It must always be appended to
within a buildlink3.mk file.

The third section is protected from multiple inclusion and controls how the
dependency on pkg is added. Several important variables are set in the section:

  * BUILDLINK_DEPENDS. pkg is the actual dependency recorded in the installed
    package; this should always be set using += to ensure that we're appending
    to any pre-existing list of values. This variable should be set to the
    first version of the package that had the last change in the major number
    of a shared library or that had a major API change.
   
  * BUILDLINK_PKGSRCDIR.pkg is the location of the pkg pkgsrc directory;
   
  * BUILDLINK_DEPMETHOD.pkg (not shown above) controls whether we use
    BUILD_DEPENDS or DEPENDS to add the dependency on pkg. The build dependency
    is selected by setting BUILDLINK_DEPMETHOD.pkg to "build". By default, the
    full dependency is used.
   
  * BUILDLINK_INCDIRS. pkg and BUILDLINK_LIBDIRS.pkg (not shown above) are
    lists of subdirectories of ${BUILDLINK_PREFIX.pkg} to add to the header and
    library search paths. These default to "include" and "lib" respectively.
   
  * BUILDLINK_CPPFLAGS.pkg (not shown above) is the list of preprocessor flags
    to add to CPPFLAGS, which are passed on to the configure and build phases.
    The "-I" option should be avoided and instead be handled using
    BUILDLINK_INCDIRS.pkg as above.
   
The following variables are all optionally defined within this second section
(protected against multiple inclusion) and control which package files are
symlinked into ${BUILDLINK_DIR} and how their names are transformed during the
symlinking:

  * BUILDLINK_FILES.pkg (not shown above) is a shell glob pattern relative to $
    {BUILDLINK_PREFIX.pkg} to be symlinked into ${BUILDLINK_DIR}, e.g. include/
    *.h.
   
  * BUILDLINK_FILES_CMD.pkg (not shown above) is a shell pipeline that outputs
    to stdout a list of files relative to ${BUILDLINK_PREFIX.pkg}. The
    resulting files are to be symlinked into ${BUILDLINK_DIR}. By default, this
    takes the +CONTENTS of a pkg and filters it through $
    {BUILDLINK_CONTENTS_FILTER.pkg}.
   
  * BUILDLINK_CONTENTS_FILTER.pkg (not shown above) is a filter command that
    filters +CONTENTS input into a list of files relative to $
    {BUILDLINK_PREFIX.pkg} on stdout. By default for overwrite packages,
    BUILDLINK_CONTENTS_FILTER.pkg outputs the contents of the include and lib
    directories in the package +CONTENTS, and for pkgviews packages, it outputs
    any libtool archives in lib directories.
   
  * BUILDLINK_TRANSFORM.pkg (not shown above) is a list of sed arguments used
    to transform the name of the source filename into a destination filename,
    e.g. -e "s|/curses.h|/ncurses.h|g".
   
The last section includes any buildlink3.mk needed for pkg's library
dependencies. Including these buildlink3.mk files means that the headers and
libraries for these dependencies are also symlinked into ${BUILDLINK_DIR}
whenever the pkg buildlink3.mk file is included.

9.2.2. Updating BUILDLINK_DEPENDS.pkg in buildlink3.mk files

There are two situations that require increasing the dependency listed in
BUILDLINK_DEPENDS.pkg after a package update:

 1. if the sonames (major number of the library version) of any installed
    shared libraries change;
   
 2. if the API or interface to the header files change.
   
In these cases, BUILDLINK_DEPENDS.pkg should be adjusted to require at least
the new package version. In some cases, the packages that depend on this new
version may need their PKGREVISIONs increased and, if they have buildlink3.mk
files, their BUILDLINK_DEPENDS.pkg adjusted, too. This is needed so that binary
packages made using it will require the correct package dependency and not
settle for an older one which will not contain the necessary shared libraries.

Please take careful consideration before adjusting BUILDLINK_DEPENDS.pkg as we
don't want to cause unneeded package deletions and rebuilds. In many cases, new
versions of packages work just fine with older dependencies. See Section
12.1.3, "Handling dependencies" and Chapter 9, Buildlink methodology for more
information about dependencies on other packages, including the
BUILDLINK_RECOMMENDED and RECOMMENDED definitions.

9.3. Writing builtin.mk files

Some packages in pkgsrc install headers and libraries that coincide with
headers and libraries present in the base system. Aside from a buildlink3.mk
file, these packages should also include a builtin.mk file that includes the
necessary checks to decide whether using the built-in software or the pkgsrc
software is appropriate.

The only requirements of a builtin.mk file for pkg are:

 1. It should set USE_BUILTIN.pkg to either "yes" or "no" after it is included.
   
 2. It should not override any USE_BUILTIN.pkg which is already set before the
    builtin.mk file is included.
   
 3. It should be written to allow multiple inclusion. This is very important
    and takes careful attention to Makefile coding.
   
9.3.1. Anatomy of a builtin.mk file

The following is the recommended template for builtin.mk files:

.if !defined(IS_BUILTIN.foo)
#
# IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
# genuinely exists in the system or not.
#
IS_BUILTIN.foo?=        no

# BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
# version can be determined.
#
.  if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
BUILTIN_PKG.foo?=       foo-1.0
.  endif
.endif  # IS_BUILTIN.foo

.if !defined(USE_BUILTIN.foo)
USE_BUILTIN.foo?=       ${IS_BUILTIN.foo}
.  if defined(BUILTIN_PKG.foo)
.    for _depend_ in ${BUILDLINK_DEPENDS.foo}
.      if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
USE_BUILTIN.foo!=                                                       \
      if ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo}; then     \
              ${ECHO} "yes";                                            \
      else                                                              \
              ${ECHO} "no";                                             \
      fi
.      endif
.    endfor
.  endif
.endif  # USE_BUILTIN.foo

CHECK_BUILTIN.foo?=     no
.if !empty(CHECK_BUILTIN.foo:M[nN][oO])
#
# Here we place code that depends on whether USE_BUILTIN.foo is set to
# "yes" or "no".
#
.endif  # CHECK_BUILTIN.foo
      

The first section sets IS_BUILTIN.pkg depending on if pkg really exists in the
base system. This should not be a base system software with similar
functionality to pkg; it should only be "yes" if the actual package is included
as part of the base system. This variable is only used internally within the
builtin.mk file.

The second section sets BUILTIN_PKG.pkg to the version of pkg in the base
system if it exists (if IS_BUILTIN.pkg is "yes"). This variable is only used
internally within the builtin.mk file.

The third section sets USE_BUILTIN.pkg and is required in all builtin.mk files.
The code in this section must make the determination whether the built-in
software is adequate to satisfy the dependencies listed in
BUILDLINK_DEPENDS.pkg. This is typically done by comparing BUILTIN_PKG.pkg
against each of the dependencies in BUILDLINK_DEPENDS.pkg. USE_BUILTIN.pkg must
be set to the correct value by the end of the builtin.mk file. Note that
USE_BUILTIN.pkg may be "yes" even if IS_BUILTIN.pkg is "no" because we may make
the determination that the built-in version of the software is similar enough
to be used as a replacement.

The last section is guarded by CHECK_BUILTIN.pkg, and includes code that uses
the value of USE_BUILTIN.pkg set in the previous section. This typically
includes, e.g., adding additional dependency restrictions and listing
additional files to symlink into ${BUILDLINK_DIR} (via BUILDLINK_FILES.pkg).

9.3.2. Global preferences for native or pkgsrc software

When building packages, it's possible to choose whether to set a global
preference for using either the built-in (native) version or the pkgsrc version
of software to satisfy a dependency. This is controlled by setting
PREFER_PKGSRC and PREFER_NATIVE. These variables take values of either "yes",
"no", or a list of packages. PREFER_PKGSRC tells pkgsrc to use the pkgsrc
versions of software, while PREFER_NATIVE tells pkgsrc to use the built-in
versions. Preferences are determined by the most specific instance of the
package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is specified in
neither or in both variables, then PREFER_PKGSRC has precedence over
PREFER_NATIVE. For example, to require using pkgsrc versions of software for
all but the most basic bits on a NetBSD system, you can set:

        PREFER_PKGSRC=  yes
        PREFER_NATIVE=  getopt skey tcp_wrappers
      

A package must have a builtin.mk file to be listed in PREFER_NATIVE, otherwise
it is simply ignored in that list.

Chapter 10. Options handling

Table of Contents

10.1. Global default options
10.2. Converting packages to use bsd.options.mk

Many packages have the ability to be built to support different sets of
features. bsd.options.mk is a framework in pkgsrc that provides generic
handling of those options that determine different ways in which the packages
can be built. It's possible for the user to specify exactly which sets of
options will be built into a package or to allow a set of global default
options apply.

10.1. Global default options

Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
the options that should be built into every package if that option is
supported. This variable should be set in /etc/mk.conf.

10.2. Converting packages to use bsd.options.mk

The following example shows how bsd.options.mk should be use in a package
Makefile, or in a file, e.g. options.mk, that is included by the main package
Makefile.

# Global and legacy options
.if defined(WIBBLE_USE_OPENLDAP) && !empty(WIBBLE_USE_OPENLDAP:M[yY][eE][sS])
PKG_DEFAULT_OPTIONS+=   ldap
.endif
.if defined(USE_SASL2) && !empty(USE_SASL2:M[yY][eE][sS])
PKG_DEFAULT_OPTIONS+=   sasl
.endif

PKG_OPTIONS_VAR=        PKG_OPTIONS.wibble
PKG_SUPPORTED_OPTIONS=  ldap sasl
#
# Default options for "wibble" package.
#
.if !defined(PKG_OPTIONS.wibble)
PKG_DEFAULT_OPTIONS+=   sasl
endif
.include "../../mk/bsd.options.mk"

# Package-specific option-handling

###
### LDAP support
###
.if !empty(PKG_OPTIONS:Mldap)
.  include "../../databases/openldap/buildlink3.mk"
CONFIGURE_ARGS+=      --enable-ldap=${BUILDLINK_PREFIX.openldap}
.endif

###
### SASL authentication
###
.if !empty(PKG_OPTIONS:Msasl)
.  include "../../security/cyrus-sasl2/buildlink3.mk"
CONFIGURE_ARGS+=        --enable-sasl=${BUILDLINK_PREFIX.sasl}
.endif
      

The first section only exists if you are converting a package that had its own
ad-hoc options handling to use bsd.options.mk. It converts global or legacy
options variables into an equivalent PKG_OPTIONS.pkg value. These sections will
be removed over time as the old options are in turn deprecated and removed.

The second section contains the information about which build options are
supported by the package, and any default options settings if needed.

 1. PKG_OPTIONS_VAR is a list of the name of the make(1) variables that contain
    the options the user wishes to select. The recommended value is
    "PKG_OPTIONS.pkg" but any package-specific value may be used. This variable
    should be set in a package Makefile.
   
 2. PKG_SUPPORTED_OPTIONS is a list of build options supported by the package.
    This variable should be set in a package Makefile.
   
 3. ${PKG_OPTIONS_VAR} (the variables named in PKG_OPTIONS_VAR) are variables
    that list the selected build options and override any default options given
    in PKG_DEFAULT_OPTIONS. If any of the options begin with a "-", then that
    option is always removed from the selected build options, e.g.
   
            PKG_DEFAULT_OPTIONS=    kerberos ldap sasl
            PKG_OPTIONS_VAR=        WIBBLE_OPTIONS
            WIBBLE_OPTIONS=         ${PKG_DEFAULT_OPTIONS} -sasl
            # implies PKG_OPTIONS == "kerberos ldap"
              
    
    or
   
            PKG_OPTIONS_VAR=        WIBBLE_OPTIONS
            WIBBLE_OPTIONS=         kerberos -ldap ldap
            # implies PKG_OPTIONS == "kerberos"
              
    
    This variable should be set in /etc/mk.conf.
   
After the inclusion of bsd.options.mk, the following variables are set:

  * PKG_OPTIONS contains the list of the selected build options, properly
    filtered to remove unsupported and duplicate options.
   
The remaining sections contain the logic that is specific to each option. There
should be a check for every option listed in PKG_SUPPORTED_OPTIONS, and there
should be clear documentation on what turning on the option will do in the
comments preceding each section. The correct way to check for an option is to
check whether it is listed in PKG_OPTIONS.

Chapter 11. The build process

Table of Contents

11.1. Program location
11.2. Main targets
11.3. Other helpful targets

The basic steps for building a program are always the same. First the program's
source (distfile) must be brought to the local system and then extracted. After
any patches to compile properly on NetBSD are applied, the software can be
configured, then built (usually by compiling), and finally the generated
binaries, etc. can be put into place on the system. These are exactly the steps
performed by the NetBSD package system, which is implemented as a series of
targets in a central Makefile, pkgsrc/mk/bsd.pkg.mk.

11.1. Program location

Before outlining the process performed by the NetBSD package system in the next
section, here's a brief discussion on where programs are installed, and which
variables influence this.

The automatic variable PREFIX indicates where all files of the final program
shall be installed. It is usually set to LOCALBASE (/usr/pkg), or CROSSBASE for
pkgs in the "cross" category. The value of PREFIX needs to be put into the
various places in the program's source where paths to these files are encoded.
See Section 7.3, "patches/*" and Section 12.3.1, "Shared libraries - libtool"
for more details.

When choosing which of these variables to use, follow the following rules:

  * PREFIX always points to the location where the current pkg will be
    installed. When referring to a pkg's own installation path, use "${PREFIX}
    ".
   
  * LOCALBASE is where all non-X11 pkgs are installed. If you need to construct
    a -I or -L argument to the compiler to find includes and libraries
    installed by another non-X11 pkg, use "${LOCALBASE}".
   
  * X11BASE is where the actual X11 distribution (from xsrc, etc.) is
    installed. When looking for standard X11 includes (not those installed by a
    pkg), use "${X11BASE}".
   
  * X11 based are special in that they may be installed in either X11BASE or
    LOCALBASE.
   
    Usually, X11 packages should be installed under LOCALBASE whenever
    possible. Note that you will need to set USE_X11 in them to request the
    presence of X11 and to get the right compilation flags.
   
    Even though, there are some packages that cannot be installed under
    LOCALBASE: those that come with app-defaults files. These packages are
    special and they must be placed under X11BASE. To accomplish this, set
    either USE_X11BASE or USE_IMAKE in your package.
   
    Some notes: USE_X11 and USE_X11BASE are mutually exclusive. If you need to
    find includes or libraries installed by a pkg that has USE_IMAKE or
    USE_X11BASE in its pkg Makefile, you need to use both ${X11BASE} and $
    {LOCALBASE}. To force installation of all X11 packages in LOCALBASE, the 
    pkgtools/xpkgwedge is enabled by default.
   
  * X11PREFIX should be used to refer to the installed location of an X11
    package. X11PREFIX will be set to X11BASE if xpkgwedge is not installed,
    and to LOCALBASE if xpkgwedge is installed.
   
  * If xpkgwedge is installed, it is possible to have some packages installed
    in X11BASE and some in LOCALBASE. To determine the prefix of an installed
    package, the EVAL_PREFIX definition can be used. It takes pairs in the
    format "DIRNAME=<package>", and the make(1) variable DIRNAME will be set to
    the prefix of the installed package <package>, or "${X11PREFIX}" if the
    package is not installed.
   
    This is best illustrated by example.
   
    The following lines are taken from pkgsrc/wm/scwm/Makefile:
   
    EVAL_PREFIX+=               GTKDIR=gtk+
    CONFIGURE_ARGS+=        --with-guile-prefix=${LOCALBASE}        \
                            --with-gtk-prefix="${GTKDIR}"           \
                            --enable-multibyte
    
    Specific defaults can be defined for the packages evaluated using
    EVAL_PREFIX, by using a definition of the form:
   
    GTKDIR_DEFAULT= ${LOCALBASE}
    
    where GTKDIR corresponds to the first definition in the EVAL_PREFIX pair.
   
  * Within ${PREFIX}, packages should install files according to hier(7), with
    the exception that manual pages go into ${PREFIX}/man, not ${PREFIX}/share/
    man.
   
11.2. Main targets

The main targets used during the build process defined in bsd.pkg.mk are:

fetch
   
    This will check if the file(s) given in the variables DISTFILES and
    PATCHFILES (as defined in the package's Makefile) are present on the local
    system in /usr/pkgsrc/distfiles. If they are not present, an attempt will
    be made to fetch them using commands of the form:
   
    ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
    
    where ${site} varies through several possibilities in turn: first,
    MASTER_SITE_OVERRIDE is tried, then the sites specified in either
    SITES_file if defined, else MASTER_SITES or PATCH_SITES, as applies, then
    finally the value of MASTER_SITE_BACKUP. The order of all except the first
    can be optionally sorted by the user, via setting either MASTER_SORT_AWK or
    MASTER_SORT_REGEX.
   
checksum
   
    After the distfile(s) are fetched, their checksum is generated and compared
    with the checksums stored in the distinfo file. If the checksums don't
    match, the build is aborted. This is to ensure the same distfile is used
    for building, and that the distfile wasn't changed, e.g. by some malign
    force, deliberately changed distfiles on the master distribution site or
    network lossage.
   
extract
   
    When the distfiles are present on the local system, they need to be
    extracted, as they are usually in the form of some compressed archive
    format, most commonly .tar.gz.
   
    If only some of the distfiles need to be uncompressed, the files to be
    uncompressed should be put into EXTRACT_ONLY.
   
    If the distfiles are not in .tar.gz format, they can be extracted by
    setting either EXTRACT_SUFX, or EXTRACT_CMD, EXTRACT_BEFORE_ARGS and
    EXTRACT_AFTER_ARGS. In the former case, pkgsrc knows how to extract a
    number of suffixes (.tar.gz, .tgz, .tar.gz2, .tbz, .tar.Z, .tar, .shar.gz,
    .shar.bz2, .shar.Z, .shar, .Z, .bz2 and .gz; see the definition of the
    various DECOMPRESS_CMD variables bsd.pkg.mk for a complete list). Here's an
    example on how to use the other variables for a program that comes with a
    compressed shell archive whose name ends in .msg.gz:
   
         EXTRACT_SUFX=   .msg.gz
         EXTRACT_CMD=            zcat
         EXTRACT_BEFORE_ARGS=
         EXTRACT_AFTER_ARGS=     |sh
    
patch
   
    After extraction, all the patches named by the PATCHFILES, those present in
    the patches subdirectory of the package as well as in $LOCALPATCHES/
    $PKGPATH (e.g. /usr/local/patches/graphics/png) are applied. Patchfiles
    ending in .Z or .gz are uncompressed before they are applied, files ending
    in .orig or .rej are ignored. Any special options to patch(1) can be handed
    in PATCH_DIST_ARGS. See Section 7.3, "patches/*" for more details.
   
    By default patch(1) is given special args to make it fail if the patches
    apply with some lines of fuzz. Please fix (regen) the patches so that they
    apply cleanly. The rationale behind this is that patches that don't apply
    cleanly may end up being applied in the wrong place, and cause severe harm
    there.
   
configure
   
    Most pieces of software need information on the header files, system calls,
    and library routines which are available in NetBSD. This is the process
    known as configuration, and is usually automated. In most cases, a script
    is supplied with the source, and its invocation results in generation of
    header files, Makefiles, etc.
   
    If the program's distfile contains its own configure script, this can be
    invoked by setting HAS_CONFIGURE. If the configure script is a GNU autoconf
    script, GNU_CONFIGURE should be specified instead. In either case, any
    arguments to the configure script can be specified in the CONFIGURE_ARGS
    variable, and the configure script's name can be set in CONFIGURE_SCRIPT if
    it differs from the default "configure". Here's an example from the 
    sysutils/top package:
   
    HAS_CONFIGURE=          yes
    CONFIGURE_SCRIPT=       Configure
    CONFIGURE_ARGS+=        netbsd13
    
    If the program uses an Imakefile for configuration, the appropriate steps
    can be invoked by setting USE_IMAKE to "YES". (If you only want the package
    installed in $X11PREFIX but xmkmf not being run, set USE_X11BASE instead!)
   
build
   
    Once configuration has taken place, the software will be built by invoking
    $MAKE_PROGRAM on $MAKEFILE with $ALL_TARGET as the target to build. The
    default MAKE_PROGRAM is "gmake" if USE_GMAKE is set, "make" otherwise.
    MAKEFILE is set to "Makefile" by default, and ALL_TARGET defaults to "all".
    Any of these variables can be set in the package's Makefile to change the
    default build process.
   
install
   
    Once the build stage has completed, the final step is to install the
    software in public directories, so users can access the programs and files.
    As in the build-target, $MAKE_PROGRAM is invoked on $MAKEFILE here, but
    with the $INSTALL_TARGET instead, the latter defaulting to "install" (plus
    "install.man", if USE_IMAKE is set).
   
If no target is specified, the default is "build". If a subsequent stage is
requested, all prior stages are made: e.g. make build will also perform the
equivalent of:

make fetch
make checksum
make extract
make patch
make configure
make build

11.3. Other helpful targets

pre/post-*
   
    For any of the main targets described in the previous section, two
    auxiliary targets exist with "pre-" and "post-" used as a prefix for the
    main target's name. These targets are invoked before and after the main
    target is called, allowing extra configuration or installation steps be
    performed from a package's Makefile, for example, which a program's
    configure script or install target omitted.
   
do-*
   
    Should one of the main targets do the wrong thing, and should there be no
    variable to fix this, you can redefine it with the do-* target. (Note that
    redefining the target itself instead of the do-* target is a bad idea, as
    the pre-* and post-* targets won't be called anymore, etc.) You will not
    usually need to do this.
   
reinstall
   
    If you did a make install and you noticed some file was not installed
    properly, you can repeat the installation with this target, which will
    ignore the "already installed" flag.
   
deinstall
   
    This target does a pkg_delete(1) in the current directory, effectively
    de-installing the package. The following variables can be used to tune the
    behaviour:
   
    PKG_VERBOSE
       
        Add a "-v" to the pkg_delete(1) command.
       
    DEINSTALLDEPENDS
       
        Remove all packages that require (depend on) the given package. This
        can be used to remove any packages that may have been pulled in by a
        given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
        pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding
        "-R" to the pkg_delete(1) command line.
       
update
   
    This target causes the current package to be updated to the latest version.
    The package and all depending packages first get de-installed, then current
    versions of the corresponding packages get compiled and installed. This is
    similar to manually noting which packages are currently installed, then
    performing a series of make deinstall and make install (or whatever
    UPDATE_TARGET is set to) for these packages.
   
    You can use the "update" target to resume package updating in case a
    previous make update was interrupted for some reason. However, in this
    case, make sure you don't call make clean or otherwise remove the list of
    dependent packages in WRKDIR. Otherwise you lose the ability to
    automatically update the current package along with the dependent packages
    you have installed.
   
    Resuming an interrupted make update will only work as long as the package
    tree remains unchanged. If the source code for one of the packages to be
    updated has been changed, resuming make update will most certainly fail!
   
    The following variables can be used either on the command line or in /etc/
    mk.conf to alter the behaviour of make update:
   
    UPDATE_TARGET
       
        Install target to recursively use for the updated package and the
        dependent packages. Defaults to DEPENDS_TARGET if set, "install"
        otherwise for make update. e.g. make update UPDATE_TARGET=package
       
    NOCLEAN
       
        Don't clean up after updating. Useful if you want to leave the work
        sources of the updated packages around for inspection or other
        purposes. Be sure you eventually clean up the source tree (see the
        "clean-update" target below) or you may run into troubles with old
        source code still lying around on your next make or make update.
       
    REINSTALL
       
        Deinstall each package before installing (making DEPENDS_TARGET). This
        may be necessary if the "clean-update" target (see below) was called
        after interrupting a running make update.
       
    DEPENDS_TARGET
       
        Allows you to disable recursion and hardcode the target for packages.
        The default is "update" for the update target, facilitating a recursive
        update of prerequisite packages. Only set DEPENDS_TARGET if you want to
        disable recursive updates. Use UPDATE_TARGET instead to just set a
        specific target for each package to be installed during make update
        (see above).
       
clean-update
   
    Clean the source tree for all packages that would get updated if make
    update was called from the current directory. This target should not be
    used if the current package (or any of its depending packages) have already
    been de-installed (e.g., after calling make update) or you may lose some
    packages you intended to update. As a rule of thumb: only use this target 
    before the first time you run make update and only if you have a dirty
    package tree (e.g., if you used NOCLEAN).
   
    If you unsure about whether your tree is clean you can either perform a 
    make clean at the top of the tree, or use the following sequence of
    commands from the directory of the package you want to update (before
    running make update for the first time, otherwise you lose all the packages
    you wanted to update!):
   
    # make clean-update
    # make clean CLEANDEPENDS=YES
    # make update
    
    The following variables can be used either on the command line or in /etc/
    mk.conf to alter the behaviour of make clean-update:
   
    CLEAR_DIRLIST
       
        After make clean, do not reconstruct the list of directories to update
        for this package. Only use this if make update successfully installed
        all packages you wanted to update. Normally, this is done automatically
        on make update, but may have been suppressed by the NOCLEAN variable
        (see above).
       
info
   
    This target invokes pkg_info(1) for the current package. You can use this
    to check which version of a package is installed.
   
readme
   
    This target generates a README.html file, which can be viewed using a
    browser such as www/mozilla or www/links. The generated files contain
    references to any packages which are in the PACKAGES directory on the local
    host. The generated files can be made to refer to URLs based on
    FTP_PKG_URL_HOST and FTP_PKG_URL_DIR. For example, if I wanted to generate
    README.html files which pointed to binary packages on the local machine, in
    the directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and
    FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its
    subdirectories will be searched for all the binary packages.
   
readme-all
   
    Use this target to create a file README-all.html which contains a list of
    all packages currently available in the NetBSD Packages Collection,
    together with the category they belong to and a short description. This
    file is compiled from the pkgsrc/*/README.html files, so be sure to run
    this after a make readme.
   
cdrom-readme
   
    This is very much the same as the "readme" target (see above), but is to be
    used when generating a pkgsrc tree to be written to a CD-ROM. This target
    also produces README.html files, and can be made to refer to URLs based on
    CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR.
   
show-distfiles
   
    This target shows which distfiles and patchfiles are needed to build the
    package. (DISTFILES and PATCHFILES, but not patches/*)
   
show-downlevel
   
    This target shows nothing if the package is not installed. If a version of
    this package is installed, but is not the version provided in this version
    of pkgsrc, then a warning message is displayed. This target can be used to
    show which of your installed packages are downlevel, and so the old
    versions can be deleted, and the current ones added.
   
show-pkgsrc-dir
   
    This target shows the directory in the pkgsrc hierarchy from which the
    package can be built and installed. This may not be the same directory as
    the one from which the package was installed. This target is intended to be
    used by people who may wish to upgrade many packages on a single host, and
    can be invoked from the top-level pkgsrc Makefile by using the
    "show-host-specific-pkgs" target.
   
show-installed-depends
   
    This target shows which installed packages match the current package's
    DEPENDS. Useful if out of date dependencies are causing build problems.
   
check-shlibs
   
    After a package is installed, check all its binaries and (on ELF platforms)
    shared libraries to see if they find the shared libs they need. Run by
    default if PKG_DEVELOPER is set in /etc/mk.conf.
   
print-PLIST
   
    After a "make install" from a new or upgraded pkg, this prints out an
    attempt to generate a new PLIST from a find -newer work/.extract_done. An
    attempt is made to care for shared libs etc., but it is strongly
    recommended to review the result before putting it into PLIST. On upgrades,
    it's useful to diff the output of this command against an already existing
    PLIST file.
   
    If the package installs files via tar(1) or other methods that don't update
    file access times, be sure to add these files manually to your PLIST, as
    the "find -newer" command used by this target won't catch them!
   
    See Section 8.3, "Tweaking output of make print-PLIST" for more information
    on this target.
   
bulk-package
   
    Used to do bulk builds. If an appropriate binary package already exists, no
    action is taken. If not, this target will compile, install and package it
    (and it's depends, if PKG_DEPENDS is set properly. See Section 5.3.1,
    "Configuration". After creating the binary package, the sources, the
    just-installed package and it's required packages are removed, preserving
    free disk space.
   
    Beware that this target may deinstall all packages installed on a system!
   
bulk-install
   
    Used during bulk-installs to install required packages. If an upto-date
    binary package is available, it will be installed via pkg_add(1). If not, 
    make bulk-package will be executed, but the installed binary not be
    removed.
   
    A binary package is considered "upto-date" to be installed via pkg_add(1)
    if:
   
      * None of the package's files (Makefile, ...) were modified since it was
        built.
       
      * None of the package's required (binary) packages were modified since it
        was built.
       
    Beware that this target may deinstall all packages installed on a system!
   
Chapter 12. Notes on fixes for packages

Table of Contents

12.1. General operation
   
    12.1.1. How to pull in variables from /etc/mk.conf
    12.1.2. Restricted packages
    12.1.3. Handling dependencies
    12.1.4. Handling conflicts with other packages
    12.1.5. Packages that cannot or should not be built
    12.1.6. Packages which should not be deleted, once installed
    12.1.7. Handling packages with security problems
    12.1.8. How to handle compiler bugs
    12.1.9. How to handle incrementing versions when fixing an existing package
    12.1.10. Portability of packages
   
12.2. Possible downloading issues
   
    12.2.1. Packages whose distfiles aren't available for plain downloading
    12.2.2. How to handle modified distfiles with the 'old' name
   
12.3. Configuration gotchas
   
    12.3.1. Shared libraries - libtool
    12.3.2. Using libtool on GNU packages that already support libtool
    12.3.3. GNU Autoconf/Automake
   
12.4. Building considerations
   
    12.4.1. CPP defines
   
12.5. Package specific actions
   
    12.5.1. Package configuration files
    12.5.2. User interaction
    12.5.3. Handling licenses
    12.5.4. Creating an account from a package
    12.5.5. Installing score files
    12.5.6. Packages providing login shells
    12.5.7. Packages containing perl scripts
    12.5.8. Packages with hardcoded paths to other interpreters
    12.5.9. Packages installing perl modules
    12.5.10. Packages installing info files
    12.5.11. Packages installing GConf2 data files
    12.5.12. Packages installing scrollkeeper data files
    12.5.13. Packages installing X11 fonts
    12.5.14. Packages installing GTK2 modules
    12.5.15. Packages installing SGML or XML data
    12.5.16. Packages installing extensions to the MIME database
    12.5.17. Packages using intltool
   
12.6. Feedback to the author

12.1. General operation

12.1.1. How to pull in variables from /etc/mk.conf

The problem with package-defined variables that can be overridden via MAKECONF
or /etc/mk.conf is that make(1) expands a variable as it is used, but evaluates
preprocessor like statements (.if, .ifdef and .ifndef) as they are read. So, to
use any variable (which may be set in /etc/mk.conf) in one of the .if*
statements, the file /etc/mk.conf must be included before that .if* statement.

Rather than have a number of ad-hoc ways of including /etc/mk.conf, should it
exist, or MAKECONF, should it exist, include the pkgsrc/mk/bsd.prefs.mk file in
the package Makefile before any preprocessor-like .if, .ifdef, or .ifndef
statements:

.include "../../mk/bsd.prefs.mk"
    
    .if defined(USE_MENUS)
      ...
    .endif

If you wish to set the CFLAGS variable in /etc/mk.conf please make sure to use:

CFLAGS+=  -your -flags

Using CFLAGS= (i.e. without the "+") may lead to problems with packages that
need to add their own flags. Also, you may want to take a look at the devel/
cpuflags package if you're interested in optimization for the current CPU.

12.1.2. Restricted packages

Some licenses restrict how software may be re-distributed. In order to satisfy
these restrictions, the package system defines five make variables that can be
set to note these restrictions:

  * RESTRICTED
   
    This variable should be set whenever a restriction exists (regardless of
    its kind). Set this variable to a string containing the reason for the
    restriction.
   
  * NO_BIN_ON_CDROM
   
    Binaries may not be placed on CD-ROM. Set this variable to ${RESTRICTED}
    whenever a binary package may not be included on a CD-ROM.
   
  * NO_BIN_ON_FTP
   
    Binaries may not be placed on an FTP server. Set this variable to $
    {RESTRICTED} whenever a binary package may not not be made available on the
    Internet.
   
  * NO_SRC_ON_CDROM
   
    Distfiles may not be placed on CD-ROM. Set this variable to ${RESTRICTED}
    if re-distribution of the source code or other distfile(s) is not allowed
    on CD-ROMs.
   
  * NO_SRC_ON_FTP
   
    Distfiles may not be placed on FTP. Set this variable to ${RESTRICTED} if
    re-distribution of the source code or other distfile(s) via the Internet is
    not allowed.
   
Please note that the use of NO_PACKAGE, IGNORE, NO_CDROM, or other generic make
variables to denote restrictions is deprecated, because they unconditionally
prevent users from generating binary packages!

12.1.3. Handling dependencies

Your package may depend on some other package being present - and there are
various ways of expressing this dependency. pkgsrc supports the BUILD_DEPENDS
and DEPENDS definitions, as well as dependencies via buildlink3.mk, which is
the preferred way to handle dependencies, and which uses the variables named
above. See Chapter 9, Buildlink methodology for more information.

The basic difference between the two variables is as follows: The DEPENDS
definition registers that pre-requisite in the binary package so it will be
pulled in when the binary package is later installed, whilst the BUILD_DEPENDS
definition does not, marking a dependency that is only needed for building the
package.

This means that if you only need a package present whilst you are building, it
should be noted as a BUILD_DEPENDS.

The format for a BUILD_DEPENDS and a DEPENDS definition is:

<pre-req-package-name>:../../<category>/<pre-req-package>

Please note that the "pre-req-package-name" may include any of the wildcard
version numbers recognised by pkg_info(1).

 1. If your package needs another package's binaries or libraries to build or
    run, and if that package has a buildlink3.mk file available, use it:
   
        .include "../../graphics/jpeg/buildlink3.mk"
        
    
 2. If your package needs to use another package to build itself and there is
    no buildlink3.mk file available, use the BUILD_DEPENDS definition:
   
    BUILD_DEPENDS+=  autoconf-2.13:../../devel/autoconf
    
 3. If your package needs a library with which to link and again there is no
    buildlink3.mk file available, this is specified using the DEPENDS
    definition. An example of this is the print/lyx package, which uses the xpm
    library, version 3.4j to build:
   
    DEPENDS+=       xpm-3.4j:../../graphics/xpm
    
    You can also use wildcards in package dependences:
   
    DEPENDS+=       xpm-[0-9]*:../../graphics/xpm
    
    Note that such wildcard dependencies are retained when creating binary
    packages. The dependency is checked when installing the binary package and
    any package which matches the pattern will be used. Wildcard dependencies
    should be used with care.
   
    The "-[0-9]*" should be used instead of "-*" to avoid potentially ambiguous
    matches such as "tk-postgresql" matching a "tk-*" DEPENDS.
   
    Wildcards can also be used to specify that a package will only build
    against a certain minimum version of a pre-requisite:
   
    DEPENDS+=       tiff>=3.5.4:../../graphics/tiff
    
    This means that the package will build against version 3.5.4 of the tiff
    library or newer. Such a dependency may be warranted if, for example, the
    API of the library has changed with version 3.5.4 and a package would not
    compile against an earlier version of tiff.
   
    Please note that such dependencies should only be updated if a package
    requires a newer pre-requisite, but not to denote recommendations such as
    security updates or ABI changes that do not prevent a package from building
    correctly. Such recommendations can be expressed using RECOMMENDED:
   
    RECOMMENDED+=   tiff>=3.6.1:../../graphics/tiff
    
    In addition to the above DEPENDS line, this denotes that while a package
    will build against tiff>=3.5.4, at least version 3.6.1 is recommended.
    RECOMMENDED entries will be turned into dependencies unless explicitly
    ignored (in which case a warning will be printed). Packages that are built
    with recommendations ignored may not be uploaded to ftp.NetBSD.org by
    developers and should not be used across different systems that may have
    different versions of binary packages installed.
   
    For security fixes, please update the package vulnerabilities file as well
    as setting RECOMMENDED, see Section 12.1.7, "Handling packages with
    security problems" for more information.
   
 4. If your package needs some executable to be able to run correctly and if
    there's agail no buildlink3.mk file, this is specified using the DEPENDS
    variable. The print/lyx package needs to be able to execute the latex
    binary from the teTeX package when it runs, and that is specified:
   
    DEPENDS+=        teTeX-[0-9]*:../../print/teTeX
    
    The comment about wildcard dependencies from previous paragraph applies
    here, too.
   
If your package needs files from another package to build, see the first part
of the "do-configure" target print/ghostscript5 package (it relies on the jpeg
sources being present in source form during the build):

if [ ! -e ${_PKGSRCDIR}/graphics/jpeg/${WRKDIR:T}/jpeg-6b ]; then \
          cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} extract;              \
    fi

If you build any other packages that way, please make sure the working files
are deleted too when this package's working files are cleaned up. The easiest
way to do so is by adding a pre-clean target:

pre-clean:
          cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} clean

Please also note the BUILD_USES_MSGFMT and BUILD_USES_GETTEXT_M4 definitions,
which are provided as convenience definitions. The former works out whether
msgfmt(1) is part of the base system, and, if it isn't, installs the devel/
gettext package. The latter adds a build dependency on either an installed
version of an older gettext package, or if it isn't, installs the devel/
gettext-m4 package.

12.1.4. Handling conflicts with other packages

Your package may conflict with other packages a user might already have
installed on his system, e.g. if your package installs the same set of files
like another package in our pkgsrc tree.

In this case you can set CONFLICTS to a space separated list of packages
(including version string) your package conflicts with.

For example x11/Xaw3d and x11/Xaw-Xpm install provide the same shared library,
thus you set in pkgsrc/x11/Xaw3d/Makefile:

CONFLICTS=      Xaw-Xpm-[0-9]*

and in pkgsrc/x11/Xaw-Xpm/Makefile:

CONFLICTS=      Xaw3d-[0-9]*

Packages will automatically conflict with other packages with the name prefix
and a different version string. "Xaw3d-1.5" e.g. will automatically conflict
with the older version "Xaw3d-1.3".

12.1.5. Packages that cannot or should not be built

There are several reasons why a package might be instructed to not build under
certain circumstances. If the package builds and runs on most platforms, the
exceptions should be noted with NOT_FOR_PLATFORM. If the package builds and
runs on a small handful of platforms, set ONLY_FOR_PLATFORM instead. If the
package should be skipped (for example, because it provides functionality
already provided by the system), set PKG_SKIP_REASON to a descriptive message.
If the package should fail because some preconditions are not met, set
PKG_FAIL_REASON to a descriptive message.

IGNORE is deprecated because it didn't provide enough information to determine
whether the build should fail.

12.1.6. Packages which should not be deleted, once installed

To ensure that a package may not be deleted, once it has been installed, the
PKG_PRESERVE definition should be set in the package Makefile. This will be
carried into any binary package that is made from this pkgsrc entry. A
"preserved" package will not be deleted using pkg_delete(1) unless the "-f"
option is used.

12.1.7. Handling packages with security problems

When a vulnerability is found, this should be noted in localsrc/security/
advisories/pkg-vulnerabilities, and after the commit of that file, it should be
copied to both /pub/NetBSD/packages/distfiles/pkg-vulnerabilities and /pub/
NetBSD/packages/distfiles/vulnerabilities on ftp.NetBSD.org using localsrc/
security/advisories/Makefile. In addition, if a buildlink3.mk file exists for
an affected package, bumping PKGREVISION and creating a corresponding
BUILDLINK_RECOMMENDED.pkg entry should be considered. See Chapter 9, Buildlink
methodology for more information about writing buildlink3.mk files and
BUILDLINK_* definitions.

Also, if the fix should be applied to the stable pkgsrc branch, be sure to
submit a pullup request!

12.1.8. How to handle compiler bugs

Some source files trigger bugs in the compiler, based on combinations of
compiler version and architecture and almost always relation to optimisation
being enabled. Common symptoms are gcc internal errors or never finishing
compiling a file.

Typically a workaround involves testing the MACHINE_ARCH and compiler version,
disabling optimisation for that file/MACHINE_ARCH/compiler combination, and
documenting it in pkgsrc/doc/HACKS. See that file for a number of examples!

12.1.9. How to handle incrementing versions when fixing an existing package

When making fixes to an existing package it can be useful to change the version
number in PKGNAME. To avoid conflicting with future versions by the original
author, a "nb1", "nb2", ... suffix can be used on package versions by setting
PKGREVISION=1 (2, ...). The "nb" is treated like a "." by the pkg tools. e.g.

  DISTNAME= foo-17.42
    PKGREVISION=  9

will result in a PKGNAME of "foo-17.42nb9".

When a new release of the package is released, the PKGREVISION should be
removed. e.g. on a new minor release of the above package, things should be
like:

DISTNAME=   foo-17.43

12.1.10. Portability of packages

One appealing feature of pkgsrc is that it runs on many different platforms. As
a result, it is important to ensure, where possible, that packages in pkgsrc
are portable. There are some particular details you should pay attention to
while working on pkgsrc.

12.1.10.1. ${INSTALL}, ${INSTALL_DATA_DIR}, ...

The BSD-compatible install supplied with some operating systems will not
perform more than one operation at a time. As such, you should call "${INSTALL}
", etc. like this:

${INSTALL_DATA_DIR} ${PREFIX}/dir1
${INSTALL_DATA_DIR} ${PREFIX}/dir2

12.2. Possible downloading issues

12.2.1. Packages whose distfiles aren't available for plain downloading

If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES and
a make fetch will call files/getsite.sh with the name of each file to download
as an argument, expecting it to output the URL of the directory from which to
download it. graphics/ns-cult3d is an example of this usage.

If the download can't be automated, because the user must submit personal
information to apply for a password, or must pay for the source, or whatever,
you can set _FETCH_MESSAGE to a macro which displays a message explaining the
situation. _FETCH_MESSAGE must be executable shell commands, not just a
message. (Generally, it executes ${ECHO}). As of this writing, the following
packages use this: audio/realplayer, cad/simian, devel/ipv6socket, emulators/
vmware-module, fonts/acroread-jpnfont, sysutils/storage-manager, www/
ap-aolserver, www/openacs. Try to be consistent with them.

12.2.2. How to handle modified distfiles with the 'old' name

Sometimes authors of a software package make some modifications after the
software was released, and they put up a new distfile without changing the
package's version number. If a package is already in pkgsrc at that time, the
md5 checksum will no longer match. The correct way to work around this is to
update the package's md5 checksum to match the package on the master site
(beware, any mirrors may not be up to date yet!), and to remove the old
distfile from ftp.NetBSD.org's /pub/NetBSD/packages/distfiles directory.
Furthermore, a mail to the package's author seems appropriate making sure the
distfile was really updated on purpose, and that no trojan horse or so crept
in.

12.3. Configuration gotchas

12.3.1. Shared libraries - libtool

pkgsrc supports many different machines, with different object formats like
a.out and ELF, and varying abilities to do shared library and dynamic loading
at all. To accompany this, varying commands and options have to be passed to
the compiler, linker, etc. to get the Right Thing, which can be pretty annoying
especially if you don't have all the machines at your hand to test things. The 
devel/libtool pkg can help here, as it just "knows" how to build both static
and dynamic libraries from a set of source files, thus being platform
independent.

Here's how to use libtool in a pkg in seven simple steps:

 1. Add USE_LIBTOOL=yes to the package Makefile.
   
 2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of "$
    {CC}". You could even add it to the definition of CC, if only libraries are
    being built in a given Makefile. This one command will build both PIC and
    non-PIC library objects, so you need not have separate shared and
    non-shared library rules.
   
 3. For the linking of the library, remove any "ar", "ranlib", and "ld
    -Bshareable" commands, and instead use:
   
    ${LIBTOOL} --mode=link ${CC} -o ${.TARGET:.a=.la} ${OBJS:.o=.lo} -rpath ${PREFIX}/lib -version-info major:minor
    
    Note that the library is changed to have a .la extension, and the objects
    are changed to have a .lo extension. Change OBJS as necessary. This
    automatically creates all of the .a, .so.major.minor, and ELF symlinks (if
    necessary) in the build directory. Be sure to include "-version-info",
    especially when major and minor are zero, as libtool will otherwise strip
    off the shared library version.
   
    From the libtool manual:
   
         So, libtool library versions are described by three integers:
    
    CURRENT
           The most recent interface number that this library implements.
    
    REVISION
           The implementation number of the CURRENT interface.
    
    AGE
           The difference between the newest and oldest interfaces that this
           library implements.  In other words, the library implements all the
           interface numbers in the range from number `CURRENT - AGE' to
           `CURRENT'.
           
         If two libraries have identical CURRENT and AGE numbers, then the
    dynamic linker chooses the library with the greater REVISION number. 
    
    The "-release" option will produce different results for a.out and ELF
    (excluding symlinks) in only one case. An ELF library of the form
    "libfoo-release.so.x.y" will have a symlink of "libfoo.so.x.y" on an a.out
    platform. This is handled automatically.
   
    The "-rpath argument" is the install directory of the library being built.
   
    In the PLIST, include all of the .a, .la, and .so, .so.major and
    .so.major.minor files.
   
 4. When linking shared object (.so) files, i.e. files that are loaded via
    dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent
    them getting version tacked on.
   
    The PLIST file gets the foo.so entry.
   
 5. When linking programs that depend on these libraries before they are
    installed, preface the cc(1) or ld(1) line with "${LIBTOOL} --mode=link",
    and it will find the correct libraries (static or shared), but please be
    aware that libtool will not allow you to specify a relative path in -L
    (such as "-L../somelib"), because it expects you to change that argument to
    be the .la file. e.g.
   
    ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
    
    should be changed to:
   
    ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la
    
    and it will do the right thing with the libraries.
   
 6. When installing libraries, preface the install(1) or cp(1) command with "$
    {LIBTOOL} --mode=install", and change the library name to .la. e.g.
   
    ${LIBTOOL} --mode=install ${BSD_INSTALL_DATA} ${SOMELIB:.a=.la} ${PREFIX}/lib
    
    This will install the static .a, shared library, any needed symlinks, and
    run ldconfig(8).
   
 7. In your PLIST, include all of the .a, .la, and .so, .so.CURRENT and
    .so.CURRENT.REVISION files (this is a change from the previous behaviour).
   
12.3.2. Using libtool on GNU packages that already support libtool

Add USE_LIBTOOL=yes to the package Makefile. This will override the package's
own libtool in most cases. For older libtool using packages, libtool is made by
ltconfig script during the do-configure step; you can check the libtool script
location by doing make configure; find work*/ -name libtool.

LIBTOOL_OVERRIDE specifies which libtool scripts, relative to WRKSRC, to
override. By default, it is set to "libtool */libtool */*/libtool". If this
does not match the location of the package's libtool script(s), set it as
appropriate.

If you do not need *.a static libraries built and installed, then use
SHLIBTOOL_OVERRIDE instead.

If your package makes use of the platform independent library for loading
dynamic shared objects, that comes with libtool (libltdl), you should include
the libtool buildlink3.mk (and set USE_BUILDLINK3=YES).

Some packages use libtool incorrectly so that the package may not work or build
in some circumstances. Some of the more common errors are:

  * The inclusion of a shared object (-module) as a dependent library in an
    executable or library. This in itself isn't a problem if one of two things
    has been done:
   
     1. The shared object is named correctly, i.e. libfoo.la, not foo.la
       
     2. The -dlopen option is used when linking an executable.
       
  * The use of libltdl without the correct calls to initialisation routines.
    The function lt_dlinit() should be called and the macro
    LTDL_SET_PRELOADED_SYMBOLS included in executables.
   
12.3.3. GNU Autoconf/Automake

If a package needs GNU autoconf or automake to be executed to regenerate the
configure script and Makefile.in makefile templates, then they should be
executed in a pre-configure target. Two Makefile fragments are provided in
pkgsrc/mk/autoconf.mk and pkgsrc/mk/automake.mk to help dealing with these
tools. See comments in these files for details.

For packages that need only autoconf:

AUTOCONF_REQD=    2.50    # if default version is not good enough
...

pre-configure:
          cd ${WRKSRC}; ${AUTOCONF}

...
.include "../../mk/autoconf.mk"

and for packages that need automake and autoconf:

AUTOMAKE_REQD=  1.7.1   # if default version is not good enough
...

pre-configure:
          cd ${WRKSRC};                                           \
          ${ACLOCAL};                                             \
          ${AUTOHEADER};                                          \
          ${AUTOMAKE} -a --foreign -i;                            \
          ${AUTOCONF}

...
.include "../mk/automake.mk"

Packages which use GNU Automake will almost certainly require GNU Make, but
that's automatically provided for you in mk/automake.mk.

There are times when the configure process makes additional changes to the
generated files, which then causes the build process to try to re-execute the
automake sequence. This is prevented by touching various files in the configure
stage. If this causes problems with your package you can set AUTOMAKE_OVERRIDE=
NO in the package Makefile.

12.4. Building considerations

12.4.1. CPP defines

To port an application to NetBSD, it's usually necessary for the compiler to be
able to judge the system on which it's compiling, and we use definitions so
that the C pre-processor can do this.

To test whether you are working on a 4.4 BSD-derived system, you should use the
BSD definition, which is defined in <sys/param.h> on said systems.

#include <sys/param.h>

and then you can surround the BSD-specific parts of your package's C/C++ code
using this conditional:

#if (defined(BSD) && BSD >= 199306)
    ...
#endif

Please use the "__NetBSD__" definition sparingly - it should only apply to
features of NetBSD that are not present in other 4.4-lite derived BSDs.

12.5. Package specific actions

12.5.1. Package configuration files

Packages should be taught to look for their configuration files in $
{PKG_SYSCONFDIR}, which is passed through to the configure and build processes.
PKG_SYSCONFDIR may be customized in various ways by setting other make
variables:

  * PKG_SYSCONFBASE is the main config directory under which all package
    configuration files are to be found. This defaults to ${PREFIX}/etc, but
    may be overridden in /etc/mk.conf.
   
  * PKG_SYSCONFSUBDIR is the subdirectory of PKG_SYSCONFBASE under which the
    configuration files for a particular package may be found, e.g. the Apache
    configuration files may all be found under the httpd/ subdirectory of $
    {PKG_SYSCONFBASE}. This should be set in the package Makefile.
   
  * By default, PKG_SYSCONFDIR is set to ${PKG_SYSCONFBASE}/$
    {PKG_SYSCONFSUBDIR}, but this may be overridden by setting PKG_SYSCONFDIR.$
    {PKG_SYSCONFVAR} for a particular package, where PKG_SYSCONFVAR defaults to
    ${PKGBASE}. This is not meant to be set by a package Makefile, but is
    reserved for users who wish to override the PKG_SYSCONFDIR setting for a
    particular package with a special location.
   
The only variables that users should customize are PKG_SYSCONFBASE and
PKG_SYSCONFDIR.${PKG_SYSCONFVAR}. Users will typically want to set
PKG_SYSCONFBASE to /etc, or to accept the default location of ${PREFIX}/etc.

12.5.2. User interaction

Occasionally, packages require interaction from the user, and this can be in a
number of ways:

  * help in fetching the distfiles
   
  * help to configure the package before it is built
   
  * help during the build process
   
  * help during the installation of a package
   
The INTERACTIVE_STAGE definition is provided to notify the pkgsrc mechanism of
an interactive stage which will be needed, and this should be set in the
package's Makefile. e.g.

INTERACTIVE_STAGE= build

Multiple interactive stages can be specified:

INTERACTIVE_STAGE= configure install

12.5.3. Handling licenses

A package may underly a license which the user has or has not agreed to accept.
Usually, packages that underly well-known Open Source licenses (e.g. the GNU
Public License, GPL) won't have any special license tags added in pkgsrc which
require special action by the user of such packages, but there are quite a
number of other licenses out there that pkgsrc users may not be able to follow,
for whatever reasons. For these cases, pkgsrc contains a mechanism to note that
a package underlies a certain license, and the user has to accept the license
before the package can be installed.

Placing a certain package under a certain license works by setting the LICENSE
variable to a string identifying the license, e.g. in graphics/graphviz:

LICENSE=        graphviz-license

When trying to build, the user will get a notice that the package underlies a
license which he hasn't accepted (yet):

% make
===> graphviz-1.12 has an unacceptable license: graphviz-license.
===>     To build this package, add this line to your /etc/mk.conf:
===>     ACCEPTABLE_LICENSES+=graphviz-license
===>     To view the license, enter "/usr/bin/make show-license".
*** Error code 1

The license can be viewed with make show-license, and if it is considered
appropriate, the line printed above can be added to /etc/mk.conf to indicate
acceptance of the particular license:

ACCEPTABLE_LICENSES+=graphviz-license

When adding a package with a new license, the license text should be added to
pkgsrc/licenses for displaying. A list of known licenses can be seen in this
directory as well as by looking at the list of (commented out)
ACCEPTABLE_LICENSES variable settings in pkgsrc/mk/bsd.pkg.defaults.mk.

Is there is a really pressing need to accept all licenses at once, like when
trying to download or mirror all distfiles or doing a bulk build to test if all
packages in pkgsrc build, this can be done by setting _ACCEPTABLE=yes.

12.5.4. Creating an account from a package

There are two make variables used to control the creation of package-specific
groups and users at pre-install time. The first is PKG_GROUPS, which is a list
of group[:groupid] elements, where the groupid is optional. The second is
PKG_USERS, which is a list of elements of the form:

user:group[:[userid][:[description][:[home][:shell]]]]

where only the user and group are required, the rest being optional. A simple
example is:

  PKG_GROUPS=       foogroup
    PKG_USERS=    foouser:foogroup

A more complex example is that creates two groups and two users is:

  PKG_GROUPS=       group1 group2:1005
    PKG_USERS=    first:group1::First\\ User                      \
                  second:group2::Second\\ User:/home/second:${SH}

By default, a new user will have home directory /nonexistent, and login shell /
sbin/nologin unless they are specified as part of the user element.

The package Makefile must also set USE_PKGINSTALL=YES. This will cause the
users and groups to be created at pre-install time, and the admin will be
prompted to remove them at post-deinstall time. Automatic creation of the users
and groups can be toggled on and off by setting the PKG_CREATE_USERGROUP
variable prior to package installation.

12.5.5. Installing score files

Certain packages, most of them in the games category, install a score file that
allows all users on the system to record their highscores. In order for this to
work, the binaries need to be installed setgid and the score files owned by the
appropriate group and/or owner (traditionally the "games" user/group). The
following variables, documented in more detail in mk/bsd.pkg.defaults.mk,
control this behaviour: SETGIDGAME, GAMEDATAMODE, GAMEGRP, GAMEMODE, GAMEOWN.

Note that per default, setgid installation of games is disabled; setting
SETGIDGAME=YES will set all the other variables accordingly.

A package should therefor never hard code file ownership or access permissions
but rely on INSTALL_GAME and INSTALL_GAME_DATA to set these correctly.

12.5.6. Packages providing login shells

If the purpose of the package is to provide a login shell, the variable
PKG_SHELL should contain the full pathname of the shell executable installed by
this package. The package Makefile must also set USE_PKGINSTALL=YES to use the
automatically generated INSTALL/DEINSTALL scripts.

An example taken from shells/zsh:

  USE_PKGINSTALL=   YES
    PKG_SHELL=    ${PREFIX}/bin/zsh

The shell is registered into /etc/shells file automatically in the post-install
target by the generated INSTALL script and removed in the deinstall target by
the DEINSTALL script.

12.5.7. Packages containing perl scripts

If your package contains interpreted perl scripts, set REPLACE_PERL to ensure
that the proper interpreter path is set. REPLACE_PERL should contain a list of
scripts, relative to WRKSRC, that you want adjusted.

12.5.8. Packages with hardcoded paths to other interpreters

Your package may also contain scripts with hardcoded paths to other
interpreters besides (or as well as) perl. To correct the full pathname to the
script interpreter, you need to set the following definitions in your Makefile
(we shall use tclsh in this example):

  REPLACE_INTERPRETER+=     tcl
    _REPLACE.tcl.old=     .*/bin/tclsh
    _REPLACE.tcl.new=     ${PREFIX}/bin/tclsh
    _REPLACE_FILES.tcl=   ...list of tcl scripts which need to be fixed,
                          relative to ${WRKSRC}, just as in REPLACE_PERL

12.5.9. Packages installing perl modules

Makefiles of packages providing perl5 modules should include the Makefile
fragment ../../lang/perl5/module.mk. It provides a do-configure target for the
standard perl configuration for such modules as well as various hooks to tune
this configuration. See comments in this file for details.

Perl5 modules will install into different places depending on the version of
perl used during the build process. To address this, pkgsrc will append lines
to the PLIST corresponding to the files listed in the installed .packlist file
generated by most perl5 modules. This is invoked by defining PERL5_PACKLIST to
a space-separated list of paths to packlist files, e.g.:

PERL5_PACKLIST=   ${PERL5_SITEARCH}/auto/Pg/.packlist

The variables PERL5_SITELIB, PERL5_SITEARCH, and PERL5_ARCHLIB represent the
three locations in which perl5 modules may be installed, and may be used by
perl5 packages that don't have a packlist. These three variables are also
substituted for in the PLIST.

12.5.10. Packages installing info files

Some packages install info files or use the "makeinfo" or "install-info"
commands. Each of the info files:

  * is considered to be installed in the directory ${PREFIX}/${INFO_DIR},
   
  * is registered in the Info directory file ${PREFIX}/${INFO_DIR}/dir,
   
  * and must be listed as a filename in the INFO_FILES variable in the package
    Makefile.
   
INFO_DIR defaults to "info" and can be overridden in the package Makefile.
INSTALL and DEINSTALL scripts will be generated to handle registration of the
info files in the Info directory file. The "install-info" command used for the
info files registration is either provided by the system, or by a special
purpose package automatically added as dependency if needed.

A package which needs the "makeinfo" command at build time must define the
variable USE_MAKEINFO in its Makefile. If a minimum version of the "makeinfo"
command is needed it should be noted with the TEXINFO_REQD variable in the
package Makefile. By default, a minimum version of 3.12 is required. If the
system does not provide a makeinfo command or if it does not match the required
minimum, a build dependency on the devel/gtexinfo package will be added
automatically.

The build and installation process of the software provided by the package
should not use the install-info command as the registration of info files is
the task of the package INSTALL script, and it must use the appropriate 
makeinfo command.

To achieve this goal the pkgsrc infrastructure creates overriding scripts for
the install-info and makeinfo commands in a directory listed early in PATH.

The script overriding install-info has no effect except the logging of a
message. The script overriding makeinfo logs a message and according to the
value of USE_MAKEINFO and TEXINFO_REQD either run the appropriate makeinfo
command or exit on error.

12.5.11. Packages installing GConf2 data files

If a package installs .schemas or .entries files, used by GConf2, you need to
take some extra steps to make sure they get registered in the database:

 1. Include ../../devel/GConf2/schemas.mk instead of its buildlink3.mk file.
    This takes care of rebuilding the GConf2 database at installation and
    deinstallation time, and tells the package where to install GConf2 data
    files using some standard configure arguments. It also disallows any access
    to the database directly from the package.
   
 2. Ensure that the package installs its .schemas files under ${PREFIX}/share/
    gconf/schemas. If they get installed under ${PREFIX}/etc, you will need to
    manually patch the package.
   
 3. Check the PLIST and remove any entries under the etc/gconf directory, as
    they will be handled automatically. See Section 6.13, "Configuration files
    handling and placement" for more information.
   
 4. Define the GCONF2_SCHEMAS variable in your Makefile with a list of all
    .schemas files installed by the package, if any. Names must not contain any
    directories in them.
   
 5. Define the GCONF2_ENTRIES variable in your Makefile with a list of all
    .entries files installed by the package, if any. Names must not contain any
    directories in them.
   
12.5.12. Packages installing scrollkeeper data files

If a package installs .omf files, used by scrollkeeper, you need to take some
extra steps to make sure they get registered in the database:

 1. Include ../../textproc/scrollkeeper/omf.mk instead of its buildlink3.mk
    file. This takes care of rebuilding the scrollkeeper database at
    installation and deinstallation time, and disallows any access to it
    directly from the package.
   
 2. Check the PLIST and remove any entries under the libdata/scrollkeeper
    directory, as they will be handled automatically.
   
 3. Remove the share/omf directory from the PLIST. It will be handled by
    scrollkeeper.
   
12.5.13. Packages installing X11 fonts

If a package installs font files, you will need to rebuild the fonts database
in the directory where they get installed at installation and deinstallation
time. This can be automatically done by using mk/fonts.mk, which you need to
include in your Makefile.

When the file is included, you can list the directories where fonts are
installed in the FONTS_type_DIRS variables, where type can be one of "TTF",
"TYPE1" or "X11". Also make sure that the database file fonts.dir is not listed
in the PLIST.

Note that you should not create new directories for fonts; instead use the
standard ones to avoid that the user needs to manually configure his X server
to find them.

12.5.14. Packages installing GTK2 modules

If a package installs gtk2 immodules or loaders, you need to take some extra
steps to get them registered in the GTK2 database properly:

 1. Include ../../x11/gtk2/modules.mk instead of its buildlink3.mk file. This
    takes care of rebuilding the database at installation and deinstallation
    time.
   
 2. Set GTK2_IMMODULES=YES if your package installs GTK2 immodules.
   
 3. Set GTK2_LOADERS=YES if your package installs GTK2 loaders.
   
 4. Patch the package to not touch any of the gtk2 databases directly. These
    are:
   
      * libdata/gtk-2.0/gdk-pixbuf.loaders
       
      * libdata/gtk-2.0/gtk.immodules
       
 5. Check the PLIST and remove any entries under the libdata/gtk-2.0 directory,
    as they will be handled automatically.
   
12.5.15. Packages installing SGML or XML data

If a package installs SGML or XML data files that need to be registered in
system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some
extra steps:

 1. Include ../../textproc/xmlcatmgr/catalogs.mk in your Makefile, which takes
    care of registering those files in system-wide catalogs at installation and
    deinstallation time.
   
 2. Set SGML_CATALOGS to the full path of any SGML catalogs installed by the
    package.
   
 3. Set XML_CATALOGS to the full path of any XML catalogs installed by the
    package.
   
 4. Set SGML_ENTRIES to individual entries to be added to the SGML catalog.
    These come in groups of three strings; see xmlcatmgr(1) for more
    information (specifically, arguments recognized by the 'add' action). Note
    that you will normally not use this variable.
   
 5. Set XML_ENTRIES to individual entries to be added to the XML catalog. These
    come in groups of three strings; see xmlcatmgr(1) for more information
    (specifically, arguments recognized by the 'add' action). Note that you
    will normally not use this variable.
   
12.5.16. Packages installing extensions to the MIME database

If a package provides extensions to the MIME database by installing .xml files
inside ${PREFIX}/share/mime/packages, you need to take some extra steps to
ensure that the database is kept consistent with respect to these new files:

 1. Include ../../databases/shared-mime-info/mimedb.mk (avoid using the
    buildlink3.mk file from this same directory, which is reserved for
    inclusion from other buildlink3.mk files). It takes care of rebuilding the
    MIME database at installation and deinstallation time, and disallows any
    access to it directly from the package.
   
 2. Check the PLIST and remove any entries under the share/mime directory, 
    except for files saved under share/mime/packages. The former are handled
    automatically by the update-mime-database program, but the later are
    package-dependent and must be removed by the package that installed them in
    the first place.
   
 3. Remove any share/mime/* directories from the PLIST. They will be handled by
    the shared-mime-info package.
   
12.5.17. Packages using intltool

If a package uses intltool during its build, include the ../../textproc/
intltool/buildlink3.mk file, which forces it to use the intltool package
provided by pkgsrc, instead of the one bundled with the distribution file.

This tracks intltool's build-time dependencies and uses the latest available
version; this way, the package benefits of any bug fixes that may have appeared
since it was released.

12.6. Feedback to the author

If you have found any bugs in the package you make available, if you had to do
special steps to make it run under NetBSD or if you enhanced the software in
various other ways, be sure to report these changes back to the original author
of the program! With that kind of support, the next release of the program can
incorporate these fixes, and people not using the NetBSD packages system can
win from your efforts.

Support the idea of free software!

Chapter 13. Debugging

To check out all the gotchas when building a package, here are the steps that I
do in order to get a package working. Please note this is basically the same as
what was explained in the previous sections, only with some debugging aids.

  * Be sure to set PKG_DEVELOPER=1 in /etc/mk.conf
   
  * Install pkgtools/url2pkg, create a directory for a new package, change into
    it, then run url2pkg:
   
    % mkdir /usr/pkgsrc/category/examplepkg
    % cd /usr/pkgsrc/category/examplepkg
    % url2pkg http://www.example.com/path/to/distfile.tar.gz
    
  * Edit the Makefile as requested.
   
  * Fill in the DESCR file
   
  * Run make configure
   
  * Add any dependencies glimpsed from documentation and the configure step to
    the package's Makefile.
   
  * Make the package compile, doing multiple rounds of
   
    % make
    % pkgvi ${WRKSRC}/some/file/that/does/not/compile
    % mkpatches
    % patchdiff
    % mv ${WRKDIR}/.newpatches/* patches
    % make mps
    % make clean
    
    Doing as non-root user will ensure that no files are modified that
    shouldn't be, especially during the build phase. mkpatches, patchdiff and 
    pkgvi are from the pkgtools/pkgdiff package.
   
  * Look at the Makefile, fix if necessary; see Section 7.1, "Makefile".
   
  * Generate a PLIST:
   
    # make install
    # make print-PLIST >PLIST
    # make deinstall
    # make install
    # make deinstall
    
    You usually need to be root to do this. Look if there are any files left:
   
    # make print-PLIST
    
    If this reveals any files that are missing in PLIST, add them.
   
  * Now that the PLIST is OK, install the package again and make a binary
    package:
   
    # make reinstall
    # make package
    
  * Delete the installed package:
   
    # pkg_delete blub
    
  * Repeat the above make print-PLIST command, which shouldn't find anything
    now:
   
    # make print-PLIST
    
  * Reinstall the binary package:
   
    # pkgadd .../blub.tgz
    
  * Play with it. Make sure everything works.
   
  * Run pkglint from pkgtools/pkglint, and fix the problems it reports:
   
    # pkglint
    
  * Submit (or commit, if you have cvs access); see Chapter 14, Submitting and
    Committing.
   
Chapter 14. Submitting and Committing

Table of Contents

14.1. Submitting your packages
14.2. Committing: Importing a package into CVS
14.3. Updating a package to a newer version
14.4. Moving a package in pkgsrc

14.1. Submitting your packages

You have to separate between binary and "normal" (source) packages here:

  * precompiled binary packages
   
    Our policy is that we accept binaries only from pkgsrc developers to
    guarantee that the packages don't contain any trojan horses etc. This is
    not to piss anyone off but rather to protect our users! You're still free
    to put up your home-made binary packages and tell the world where to get
    them.
   
  * packages
   
    First, check that your package is complete, compiles and runs well; see 
    Chapter 13, Debugging and the rest of this document. Next, generate an
    uuencoded gzipped tar(1) archive, preferably with all files in a single
    directory. Finally, send-pr with category "pkg", a synopsis which includes
    the package name and version number, a short description of your package
    (contents of the COMMENT variable or DESCR file are OK) and attach the
    archive to your PR.
   
    If you want to submit several packages, please send a separate PR for each
    one, it's easier for us to track things that way.
   
    Alternatively, you can also import new packages into pkgsrc-wip ("pkgsrc
    work-in-progress"); see the homepage at http://pkgsrc-wip.sourceforge.net/
    for details.
   
14.2. Committing: Importing a package into CVS

This section is only of interest for pkgsrc developers with write access to the
pkgsrc repository. Please remember that cvs imports files relative to the
current working directory, and that the pathname that you give the cvs import
command is so that it knows where to place the files in the repository. Newly
created packages should be imported with a vendor tag of "TNF" and a release
tag of "pkgsrc-base", e.g:

  % cd .../pkgsrc/category/pkgname
  % cvs import pkgsrc/category/pkgname TNF pkgsrc-base

Remember to move the directory from which you imported out of the way, or cvs
will complain the next time you "cvs update" your source tree. Also don't
forget to add the new package to the category's Makefile.

The commit message of the initial import should include part of the DESCR file,
so people reading the mailing lists know what the package is/does.

Please note all package updates/additions in pkgsrc/doc/CHANGES. It's very
important to keep this file up to date and conforming to the existing format,
because it will be used by scripts to automatically update pages on 
www.NetBSD.org and other sites. Additionally, check the pkgsrc/doc/TODO file
and remove the entry for the package you updated, in case it was mentioned
there.

For new packages, "cvs import" is preferred to "cvs add" because the former
gets everything with a single command, and provides a consistent tag.

14.3. Updating a package to a newer version

Please always put a concise, appropriate and relevant summary of the changes
between old and new versions into the commit log when updating a package. There
are various reasons for this:

  * A URL is volatile, and can change over time. It may go away completely or
    its information may be overwritten by newer information.
   
  * Having the change information between old and new versions in our CVS
    repository is very useful for people who use either cvs or anoncvs.
   
  * Having the change information between old and new versions in our CVS
    repository is very useful for people who read the pkgsrc-changes mailing
    list, so that they can make tactical decisions about when to upgrade the
    package.
   
Please also recognise that, just because a new version of a package has been
released, it should not automatically be upgraded in the CVS repository. We
prefer to be conservative in the packages that are included in pkgsrc -
development or beta packages are not really the best thing for most places in
which pkgsrc is used. Please use your judgement about what should go into
pkgsrc, and bear in mind that stability is to be preferred above new and
possibly untested features.

14.4. Moving a package in pkgsrc

 1. Make a copy of the directory somewhere else.
   
 2. Remove all CVS dirs.
   
    Alternatively to the first two steps you can also do:
   
    % cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
    
    and use that for further work.
   
 3. Fix CATEGORIES and any DEPENDS paths that just did "../package" instead of
    "../../category/package".
   
 4. cvs import the modified package in the new place.
   
 5. Check if any package depends on it:
   
    % cd /usr/pkgsrc
    % grep /package */*/Makefile* */*/buildlink*
    
 6. Fix paths in packages from step 5 to point to new location.
   
 7. cvs rm (-f) the package at the old location.
   
 8. Remove from oldcategory/Makefile.
   
 9. Add to newcategory/Makefile.
   
10. Commit the changed and removed files:
   
    % cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
    
    (and any packages from step 5, of course).
   
Appendix A. A simple example package: bison

Table of Contents

A.1. files
   
    A.1.1. Makefile
    A.1.2. DESCR
    A.1.3. PLIST
    A.1.4. Checking a package with pkglint
   
A.2. Steps for building, installing, packaging

We checked to find a piece of software that wasn't in the packages collection,
and picked GNU bison. Quite why someone would want to have bison when Berkeley 
yacc is already present in the tree is beyond us, but it's useful for the
purposes of this exercise.

A.1. files

A.1.1. Makefile

# $NetBSD$
#

DISTNAME=       bison-1.25
CATEGORIES=     devel
MASTER_SITES=   ${MASTER_SITE_GNU}

MAINTAINER=     thorpej@NetBSD.org
HOMEPAGE=       http://www.gnu.org/software/bison/bison.html
COMMENT=        GNU yacc clone

GNU_CONFIGURE=  yes
INFO_FILES=     bison.info

.include "../../mk/bsd.pkg.mk"

A.1.2. DESCR

GNU version of yacc.  Can make re-entrant parsers, and numerous other
improvements.  Why you would want this when Berkeley yacc(1) is part
of the NetBSD source tree is beyond me.

A.1.3. PLIST

@comment $NetBSD$
bin/bison
man/man1/bison.1.gz
info/bison.info
info/bison.info-1
info/bison.info-2
info/bison.info-3
info/bison.info-4
info/bison.info-5
share/bison.simple
share/bison.hairy

A.1.4. Checking a package with pkglint

The NetBSD package system comes with pkgtools/pkglint which helps to check the
contents of these files. After installation it is quite easy to use, just
change to the directory of the package you wish to examine and execute pkglint:

$ pkglint
OK: checking ./DESCR.
OK: checking Makefile.
OK: checking distinfo.
OK: checking patches/patch-aa.
looks fine.

Depending on the supplied command line arguments (see pkglint(1)) more verbose
checks will be performed. Use e.g. pkglint -v for a very verbose check.

A.2. Steps for building, installing, packaging

Create the directory where the package lives, plus any auxiliary directories:

# cd /usr/pkgsrc/lang
# mkdir bison
# cd bison
# mkdir patches

Create Makefile, DESCR and PLIST (see Chapter 7, Package components - files,
directories and contents) then continue with fetching the distfile:

# make fetch
>> bison-1.25.tar.gz doesn't seem to exist on this system.
>> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//.
Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
ftp: Error retrieving file: 500 Internal error

>> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//.
Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
ftp: Error retrieving file: 500 Internal error

>> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//.
Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
Successfully retrieved file.

Generate the checksum of the distfile into distinfo:

# make makesum

Now compile:

# make
>> Checksum OK for bison-1.25.tar.gz.
===>  Extracting for bison-1.25
===>  Patching for bison-1.25
===>   Ignoring empty patch directory
===>  Configuring for bison-1.25
creating cache ./config.cache
checking for gcc... cc
checking whether we are using GNU C... yes
checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin
checking how to run the C preprocessor... cc -E
checking for minix/config.h... no
checking for POSIXized ISC... no
checking whether cross-compiling... no
checking for ANSI C header files... yes
checking for string.h... yes
checking for stdlib.h... yes
checking for memory.h... yes
checking for working const... yes
checking for working alloca.h... no
checking for alloca... yes
checking for strerror... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
===>  Building for bison-1.25
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g LR0.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g allocate.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g closure.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g conflicts.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g derives.c
cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\"  -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1  -g  ./files.c 
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getargs.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g gram.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lalr.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lex.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g main.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g nullable.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g output.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g print.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reader.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reduce.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g symtab.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g warshall.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g version.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt.c
cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt1.c
cc  -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o         getargs.o gram.o lalr.o lex.o                                   main.o nullable.o output.o print.o reader.o reduce.o symtab.o   warshall.o version.o getopt.o getopt1.o
./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp()
rm -f bison.s1
sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1

Everything seems OK, so install the files:

# make install
>> Checksum OK for bison-1.25.tar.gz.
===>  Installing for bison-1.25
sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share  /usr/pkg/info /usr/pkg/man/man1
rm -f /usr/pkg/bin/bison
cd /usr/pkg/share; rm -f bison.simple bison.hairy
rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info*
install -c  -o bin -g bin -m 555 bison /usr/pkg/bin/bison
/usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple
/usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy
cd .; for f in bison.info*;  do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done
/usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1
===>  Registering installation for bison-1.25

You can now use bison, and also - if you decide so - remove it with pkg_delete
bison. Should you decide that you want a binary package, do this now:

# make package
>> Checksum OK for bison-1.25.tar.gz.
===>  Building package for bison-1.25
Creating package bison-1.25.tgz
Registering depends:.
Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'

Now that you don't need the source and object files any more, clean up:

# make clean
===>  Cleaning for bison-1.25

Appendix B. Build logs

Table of Contents

B.1. Building figlet
B.2. Packaging figlet

B.1. Building figlet

# make
===> Checking for vulnerabilities in figlet-2.2.1nb2
=> figlet221.tar.gz doesn't seem to exist on this system.
=> Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/.
=> [172219 bytes]
Connected to ftp.plig.net.
220 ftp.plig.org NcFTPd Server (licensed copy) ready.
331 Guest login ok, send your complete e-mail address as password.
230-You are user #5 of 500 simultaneous users allowed.
230-
230-  ___ _             _ _                   
230- |  _| |_ ___   ___| |_|___   ___ ___ ___ 
230- |  _|  _| . |_| . | | | . |_| . |  _| . |
230- |_| |_| |  _|_|  _|_|_|_  |_|___|_| |_  |
230-         |_|   |_|     |___|         |___|
230-
230-** Welcome to ftp.plig.org **
230-
230-Please note that all transfers from this FTP site are logged. If you
230-do not like this, please disconnect now.
230-
230-This arhive is available via
230-
230-HTTP:  http://ftp.plig.org/
230-FTP:   ftp://ftp.plig.org/     (max 500 connections)
230-RSYNC: rsync://ftp.plig.org/   (max  30 connections)
230-
230-Please email comments, bug reports and requests for packages to be
230-mirrored to ftp-admin@plig.org.   
230-
230-
230 Logged in anonymously.
Remote system type is UNIX.
Using binary mode to transfer files.
200 Type okay.
250 "/pub" is new cwd.
250-"/pub/figlet" is new cwd.
250-
250-Welcome to the figlet archive at ftp.figlet.org
250-    
250-    ftp://ftp.figlet.org/pub/figlet/
250-
250-The official FIGlet web page is:
250-    http://www.figlet.org/
250-
250-If you have questions, please mailto:info@figlet.org. If you want to
250-contribute a font or something else, you can email us.
250 
250 "/pub/figlet/program" is new cwd.
250 "/pub/figlet/program/unix" is new cwd.
local: figlet221.tar.gz remote: figlet221.tar.gz
502 Unimplemented command.
227 Entering Passive Mode (195,40,6,41,246,104)
150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes).
38% |**************                       | 65800      64.16 KB/s    00:01 ETA
226 Transfer completed.
172219 bytes received in 00:02 (75.99 KB/s)
221 Goodbye.
=> Checksum OK for figlet221.tar.gz.
===> Extracting for figlet-2.2.1nb2
===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found
===> Patching for figlet-2.2.1nb2
===> Applying pkgsrc patches for figlet-2.2.1nb2
===> Overriding tools for figlet-2.2.1nb2
===> Creating toolchain wrappers for figlet-2.2.1nb2
===> Configuring for figlet-2.2.1nb2
===> Building for figlet-2.2.1nb2
gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\"  -DDEFAULTFONTFILE=\"standard.flf\"  figlet.c zipio.c crc.c inflate.c -o figlet
chmod a+x figlet
gcc -O2 -o chkfont chkfont.c
=> Unwrapping files-to-be-installed.
#
# make install
===> Checking for vulnerabilities in figlet-2.2.1nb2
===> Installing for figlet-2.2.1nb2
install -d -o root -g wheel -m 755 /usr/pkg/bin
install -d -o root -g wheel -m 755 /usr/pkg/man/man6
mkdir -p /usr/pkg/share/figlet
cp figlet /usr/pkg/bin
cp chkfont /usr/pkg/bin
chmod 555 figlist showfigfonts
cp figlist /usr/pkg/bin
cp showfigfonts /usr/pkg/bin
cp fonts/*.flf /usr/pkg/share/figlet
cp fonts/*.flc /usr/pkg/share/figlet
cp figlet.6 /usr/pkg/man/man6
===> Registering installation for figlet-2.2.1nb2
#

B.2. Packaging figlet

# make package
===> Checking for vulnerabilities in figlet-2.2.1nb2
===> Packaging figlet-2.2.1nb2
===> Building binary package for figlet-2.2.1nb2
Creating package /home/cvs/pkgsrc/packages/i386/All/figlet-2.2.1nb2.tgz
Using SrcDir value of /usr/pkg
Registering depends:.  
#

Appendix C. Layout of the FTP server's package archive

Layout for precompiled binary packages on ftp.NetBSD.org:

/pub/NetBSD/packages/
                distfiles/

                # Unpacked pkgsrc trees
                pkgsrc-current -> /pub/NetBSD/NetBSD-current/pkgsrc
                pkgsrc-2003Q4 -> N/A
                pkgsrc-2004Q1/pkgsrc

                # pkgsrc archives
                pkgsrc-current.tar.gz -> ../NetBSD-current/tar_files/pkgsrc.tar.gz
                pkgsrc-2003Q4.tar.gz -> N/A
                pkgsrc-2004Q1.tar.gz -> N/A

                # Per pkgsrc-release/OS-release/arch package archives
                pkgsrc-2003Q4/
                        NetBSD-1.6.2/
                                i386/
                                        All/
                                        archivers/
                                                foo -> ../All/foo
                                        ...
                pkgsrc-2004Q1/
                        NetBSD-1.6.2/
                                i386/
                                        All/
                                        ...
                        NetBSD-2.0/
                                i386/
                                        All/
                                        ...
                        SunOS-5.9/
                                sparc/
                                        All/
                                        ...
                                x86/
                                        All/
                                        ...

                # Per os-release package archive convenience links
                NetBSD-1.6.2 -> 1.6.2
                1.6.2/
                        i386 -> ../pkgsrc-2004Q1/NetBSD-1.6.2/i386
                        m68k/
                                All/
                                archivers/
                                        foo -> ../All/foo
                                ...
                        amiga -> m68k
                        atari -> m68k
                        ...

                2.0 -> NetBSD-2.0       # backward compat, historic
                NetBSD-2.0/
                        i386 -> ../pkgsrc-2004Q1/NetBSD-2.0/i386
                SunOS-5.9/
                        sparc -> ../pkgsrc-2004Q1/SunOS-5.9/sparc
                        x86 -> ../pkgsrc-2004Q1/SunOS-5.9/x86
                        

To create:

 1. Run bulk build, see Section 5.3, "Doing a bulk build of all packages"
   
 2. Upload /usr/pkgsrc/packages to
   
        ftp://ftp.NetBSD.org/pub/NetBSD/packages/\
            pkgsrc-2004Q3/\                         # pkgsrc-branch
            `uname -s`-`uname -r`/                  # OS & version
            `uname -p`                              # architecture
           
    
 3. If necessary, create a symlink ln -s `uname -m` `uname -p` (amiga -> m68k,
    ...)
   
Appendix D. Editing guidelines for the pkgsrc guide

Table of Contents

D.1. Targets
D.2. Procedure

This section contains information on editing the pkgsrc guide itself.

D.1. Targets

The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several
files are created from it:

  * pkgsrc/doc/pkgsrc.txt, which replaces pkgsrc/Packages.txt
   
  * pkgsrc/doc/pkgsrc.html
   
  * http://www.NetBSD.org/Documentation/pkgsrc/: the documentation on the
    NetBSD website will be built from pkgsrc and kept up to date on the web
    server itself. This means you must make sure that your changes haven't
    broken the build!
   
D.2. Procedure

The procedure to edit the pkgsrc guide is:

  * Edit the XML file(s) in pkgsrc/doc/guide/files
   
  * Run make in pkgsrc/doc/guide to build the HTML and ASCII version
   
  * Run make OUTPUT=pdf in pkgsrc/doc/guide to build the PDF version. Dont'
    omit this, as this does a very strict SGML test, and doing this properly is
    important for getting proper documentation on the web server!
   
  * If all is well, run make install-doc to put the generated files into
    pkgserc/doc.
   
  * cvs commit pkgsrc/doc/guide/files
   
  * cvs commit pkgsrc/doc/pkgsrc.{html,txt}