CVS log for pkgsrc/comms/p5-pilot-link/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / comms / p5-pilot-link

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

*: recursive bump for perl 5.40

*: recursive bump for perl 5.38

Revbump due to fixing linkage with libpisock in pilot-link-libs

*: recursive bump for perl 5.36

*: recursive bump for perl 5.34

*: bump PKGREVISION for perl-5.32.

Bump PKGREVISIONs for perl 5.30.0

Recursive bump for perl5-5.28.0

*: Move SUBST_STAGE from post-patch to pre-configure

Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.

Recursive revbump from lang/perl5 5.26.0

Bump PKGREVISION for perl-5.24.

Recursive PKGREVISION bump for all packages mentioning 'perl',
having a PKGNAME of p5-*, or depending such a package,
for perl-5.22.0.

Bump for perl-5.20.0.
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.

bump for pilot-link-libs ncurses removal

Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.

Recursive bump for png-1.6.

Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Revision bump after updating perl5 to 5.14.1.

Use more REPLACE_PERL, and use SUBST for handling the interpreter line of
a build product.

png shlib name changed for png>=1.5.0, so bump PKGREVISIONs.

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Bump PKGREVISION for libpng shlib name change.
Also add some patches to remove use of deprecated symbols and fix other
problems when looking for or compiling against libpng-1.4.x.

Update to 0.12.4:

Last-minute fixes before releasing 0.12.4

Fix for Sony SJ-22 device sync (fixes bug #1957 filed at
bugs.pilot-link.org)

Updated documentation to reflect a cleaner layout and output
(closes bug #1913 in the bugtracker at bugs.pilot-link.org

Integrate jpilot's contacts support. See
http://lists.pilot-link.org/pipermail/pilot-link-devel/2009-February/001762.html

Adding CalendarDB support to pilot-link

Adding minor tweak for m4 macro optimizations

Minor fix for a buffer size miscalculation (from Nicholas Piper)

Adding missing newline at the end of the file.

pi-debug.h, pi-threadsafe.h: Cleaning up unnecessary references
to config.h here.

Added pi-md5.h.in

generates pi-md5.h

Now autogenerated from pi-md5.h.in

Add minor fix for reported segfault when closing down bluetooth
connection.  This closes bug #1872

UINT32 was broken on 64-bit systems.  This should fix it on most
systems.

Increment ChangeLog to test/validate an LDAP permission issue
with LockDir

Implementing a Zire 22 fix from Tom Billiet

Bump for 0.12.4

Added Aaron's fixes (oof! This has been in the queue for awhile.
Sorry Aaron). This closes bug #1448.

Mark packages as MAKE_JOBS_SAFE=no that failed in a bulk build with
MAKE_JOBS=2 and worked without.

Recursive ABI depends update and PKGREVISION bump for readline-6.0 shlib
major change.

Reported by Robert Elz in PR 41345.

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Add DESTDIR support.

To install perl module files,  remove cookie file.
Should fix build problem of comms/pilotmgr.

Bump PKGREVISION.

Fix installation and PLIST after update to 0.12.2.
Install failed, so no PKGREVISION bump necessary.

Prepare for switching to NO_MTREE=yes.

Whitespace cleanup, courtesy of pkglint.
Patch provided by Sergey Svishchev in private mail.

No X11 servicable part included.

Update pilot-link-libs, pilot-link, p5-pilot-link to 0.12.1

pilot-link v0.12.1
There isn't much "new" in this release, just some rapid-fire bug fixes
reported from users and a lot of code has been cleaned up in the tree
to remove unnecessary includes.
* Code cleanup in libpisock, libpisync, src and include
* Fixed the installation faux pas with udev rules, oops!

pilot-link v0.12.0
pilot-link 0.12.0 "Trois ans" ("Three Years") is now official.
There have been so many changes in this release and I can't remember
them all, but here's the short list:
* Many of the userland binaries now have new names, to avoid some
  potential namespace collisions (dlpsh is now pilot-dlpsh for example,
  memos is now pilot-memos). If you use scripts which call these
  applications, you may have to make minor changes to accomodate the
  new naming scheme.
* Documentation is now in DocBook XML, and manpages are dynamically
  generated from that source. Other docs are much more detailed, and
  there are quite a few README files that have been added to help.
* Direct libusb support! This is one of the most monumental features in
  0.12.0, and should help those who have trouble using the kernel's
  visor driver in Linux with their device. Now you can get a healthy
  300% to 600% speedup in sync times, depending on your Palm's
  processor speed. See doc/README.libusb for details. Thanks go to
  Zephania Hull for working out how to get native libusb working with
  pilot-link.
* Native support for Mac OS X. You can now just download the tarball
  and build it directly on Mac OS X machines, and it will just run.
  Thanks go to Florent Pillet for his tireless work in getting this all
  working efficiently and for squashing countless bugs in the libraries
  along the way.
* So many other fixes, additions, features and new things to count.

Bump BUILDLINK_ABI_DEPENDS.png and PKGREVISION for png-1.2.9nb2 update.

Over 1200 files touched but no revisions bumped :)

RECOMMENDED is removed. It becomes ABI_DEPENDS.

BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.

BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.

BUILDLINK_DEPENDS does not change.

IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".

Added to obsolete.mk checking for IGNORE_RECOMMENDED.

I did not manually go through and fix any aesthetic tab/spacing issues.

I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.

I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.

As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.

As discussed on tech-pkg.

I will commit to revbump, pkglint, pkg_install, createbuildlink separately.

Note that if you use wip, it will fail!  I will commit to pkgsrc-wip
later (within day).

Recursive revision bump / recommended bump for gettext ABI change.

Ran "pkglint --autofix", which corrected some of the quoting issues in
CONFIGURE_ARGS.

Remove a patch that was forcing installation of the module into the
site directories.  Bump the PKGREVISION of p5-pilot-link to 4.

Bump the PKGREVISIONs of all (638) packages that hardcode the locations
of Perl files to deal with the perl-5.8.7 update that moved all
pkgsrc-installed Perl files into the "vendor" directories.

Turn PERL5_PACKLIST into a relative path instead of an absolute path.
These paths are now relative to PERL5_PACKLIST_DIR, which currently
defaults to ${PERL5_SITEARCH}.  There is no change to the binary
packages.

Massive cleanup of buildlink3.mk and builtin.mk files in pkgsrc.
Several changes are involved since they are all interrelated.  These
changes affect about 1000 files.

The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk.  bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files.  Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred.  This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.

The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages.  Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc.  This modification is a nod toward LOCALBASE=/usr.  The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.

The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc.  The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.

The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files.  Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories.  These files are used as input
to imake since imake can't use stdin for that purpose.

The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead.  This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed.  Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries.  Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.

Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions:

	USE_GNU_TOOLS	-> USE_TOOLS
	awk		-> gawk
	m4		-> gm4
	make		-> gmake
	sed		-> gsed
	yacc		-> bison

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Libtool fix for PR pkg/26633, and other issues.  Update libtool to 1.5.10
in the process.  (More information on tech-pkg.)

Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.

Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.

Convert to buildlink3.

replace deprecated USE_GMAKE with USE_GNU_TOOLS+=make.

COMMENT should start with a capital letter.

PKGREVISION bump for libiconv update.

Update pilot-link packages to 0.11.7.  Changes are too numerous to list
here.  They include
	* tons of bug fixes,
	* USB support,
	* C++ support,
	* restructured libraries; and
	* tons of other new features.

Use perl5/module.mk.
No need to tweak OTHERLDFLAGS.

buildlink1 -> buildlink2

Since the major of libiconv was increased during the update to 1.8,
bump dependency to latest libiconv version; recursively also bump all
dependencies of packages depending on libiconv.
Requested by fredb.

Buildlinkify, in the sense that only the perl headers are found in
${PREFIX} -- everything else is pickup up from ${BUILDLINK_DIR}.

SVR4 packages have a limit of 9 chars for a package name.
The automatic truncation in gensolpkg doesn't work for packages which
have the same package name for the first 5-6 chars.
e.g. amanda-server and amanda-client would be named amanda and amanda.
Now, we add a SVR4_PKGNAME and use amacl for amanda-client and amase for
amanda-server.
All svr4 packages also have a vendor tag, so we have to reserve some chars
for this tag, which is normaly 3 or 4 chars. Thats why we can only use 6
or 5 chars for SVR4_PKGNAME. I used 5 for all the packages, to give the
vendor tag enough room.
All p5-* packages and a few other packages have now a SVR4_PKGNAME.

Fix build problem caused by buildlink conversion.

Use distribution contained in latest pilot-link-0.9.5 sources.  Renumber
to 0.1, the correct version number for this package.  Only one package
(pilotmgr) depended on p5-pilot-link-*, so this should be okay.

Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.

Until the sources for these packages catch up to the current (post-5.6.0)
Perl API, we need to pass -DPERL_POLLUTE=1 to the build process to look
like an older perl.

Convert packages to use PERL5_PACKLIST (part 1).  These were the easy
ones to do, and each compiled and installed/de-installed apparently
correctly.

As a side effect of the dynamic PLIST, we no longer need to have separate
-static and -shared PLISTs.  It's now easier than ever to make a perl5
package for NetBSD :)

No more USE_PKGLIBTOOL.
LTCONFIG_OVERRIDE -> minus one patch.

s/USE_LIBTOOL/USE_PKGLIBTOOL/
Add a new USE_LIBTOOL definition that uses the libtool package instead of
pkglibtool which is now considered outdated.
USE_PKGLIBTOOL is available for backwards compatibility with old packages
but is deprecated for new packages.

Remove me as maintainer of those packages.

Fix run time library search path.

Sync "p5-pilot-link" version with "pilot-link": update to 0.9.3.

Import new "p5-pilot-link" package:
perl interface to pilot-link library

Initial revision